Hi, I followed this instruction:
http://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine
However, when I exited the global maintenance mode in step 7 and waited
for about 15 minutes, the engine VM still doesn't migrate to the fresh
upgraded host.
BTW, after step 6,
Hi,
I am having a problem, when you click run on the manager, it boots from
disk but when you use run once (for cloud-init) it boots from iPXE.
here is virsh -r dumpxml VMNAME
http://pastebin.com/nfwHherG
and
ps -ef |grep qemu
http://pastebin.com/fZTgRqrk
OK, due some not having done PgSQL for a long time I didn't select the
engine DB that well.
Thanks, this is a good fix where I already noticed the same snapshot
ID already by searching through the tables and looking what's going on
there.
2016-07-06 14:41 GMT+02:00 Matt .
On Tue, Jul 5, 2016 at 9:45 PM, Gianluca Cecchi
wrote:
> Hello,
> is there a list of new features I should gain if I set as 4.0 the level of
> a cluster in oVirt 4.0?
>
The release notes[1] have full list of features.
I'd say that without a doubt the most significant
On Wed, Jul 6, 2016 at 2:27 PM, Nir Soffer wrote:
> On Wed, Jul 6, 2016 at 12:18 AM, David Twersky
> wrote:
> > We use a lot of flash arrays, and some of them require that devices be 4k
> > aligned, is it possible to create a Fibre Channel Storage Domain
On Wed, Jul 6, 2016 at 5:00 PM, Fernando Frediani <
fernando.fredi...@upx.com.br> wrote:
> Hi Yaniv,
>
> I have already done a fair amount of tunning to run a minimal OS from a
> USB stick and it seems to work reasonable well overtime, but nothing rock
> solid and of course I wouldn't try it
Hi Ariel,
On 07/06/2016 11:28 AM, Ariel Pérez Rodríguez wrote:
Hi all!
I've spent more than 2 days googling how to upgrade an ovirt node.
Please, I need some serious help on this. The only thing I've found is
that u can go to Hosts tab in the engine GUI > select the blade an
there is an
After upgrading from 3.6 to 4.0 I get the following error after a
successfull login:
The user admin@internal is not authorized to perform login
Is this due the fact that there has been switched to a new ACL system ?
I created a bugreport for it:
Hi Ariel,
On 07/06/2016 11:28 AM, Ariel Pérez Rodríguez wrote:
Hi all!
I've spent more than 2 days googling how to upgrade an ovirt node.
Please, I need some serious help on this. The only thing I've found is
that u can go to Hosts tab in the engine GUI > select the blade an
there is an
> Restart engine, or run engine-setup it will clear Zombie tasks.
Still having this stuck task since may 20, restarting engine didn't fix it.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
A, okay. I never had this happen prior to 4.0 obviously so it threw
me off. Thank you!
On Wed, Jul 6, 2016, at 10:23 AM, Ravi Nori wrote:
> This happens when you are on the login screen and the server is
> restarted or the session times out due to inactivity.
> The welcome page maintains a
Hi all!
I've spent more than 2 days googling how to upgrade an ovirt node. Please,
I need some serious help on this. The only thing I've found is that u can
go to Hosts tab in the engine GUI > select the blade an there is an option
for Upgrade between Reinstall and Configure Local Storage. Well,
This happens when you are on the login screen and the server is restarted
or the session times out due to inactivity.
The welcome page maintains a session state which is passed to and back from
SSO module. The error is raised when the state is lost due to session
timeout/engine restart
Ravi
On
Hello,
I've got this, too. But I thought this to be normal since the
session-timeout was reached.
Bye
Am 06.07.2016 um 04:08 schrieb Melissa Mesler:
> I am running 4.0 on CentOS 7.2. Sometimes when I first log in to the
> admin page, it will give me and error that says "Request state does not
- Original Message -
> El 2016-07-06 11:11, nico...@devels.es escribió:
> > Hi Arik,
> >
> > El 2016-07-06 10:27, Arik Hadas escribió:
> >> Hi,
> >>
> >> This is a bit aggressive solution to remove all snapshots with the
> >> memory.
> >>
> >> Can you confirm that a storage domain
Ravi - thoughts on this one?
On Wed, Jul 6, 2016 at 4:34 PM, Melissa Mesler
wrote:
> here is the engine.log: http://pastebin.com/bTPWYi9x
> server.log:http://pastebin.com/2KfjvWF3
> console.log: http://pastebin.com/T4seBaNX
>
>
> On Wed, Jul 6, 2016, at 01:33 AM, Oved
Hi Yaniv,
I have already done a fair amount of tunning to run a minimal OS from a
USB stick and it seems to work reasonable well overtime, but nothing
rock solid and of course I wouldn't try it myself in a production oVirt
Node if that's not official.
Even if it's not running in memory it's
Copy the disk of the template to the other storage and them you will be
able to move the VMs.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary
On
Hi,
I was using a NFS storage and I'm now moving all VMs from there to an iSCSI.
I successfully moved most VMs disks but now when I try to move those made from
template using thin and VMs from pool, I get the following error :
"the template that this VM is based on doesn't exit on any storage
oVirt node depends on the base OS support of the feature (Fedora\CentOS).
I have seen people do this online, but nothing official, so you can try it.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
here is the engine.log: http://pastebin.com/bTPWYi9x
server.log:http://pastebin.com/2KfjvWF3
console.log: http://pastebin.com/T4seBaNX
On Wed, Jul 6, 2016, at 01:33 AM, Oved Ourfali wrote:
> Hi Melissa
>
> Can you attach the engine logs?
>
> Thanks,
> Oved
>
> On Wed, Jul 6, 2016 at 5:08 AM,
On Tue, Jul 5, 2016 at 12:16 PM, Gianluca Cecchi
wrote:
> Hello,
> since updating to 4.0 yesterday, my /var/log/messages on hypervisor seem
> filled by vdsm messages
>
>
>
> sudo awk -F ":" '{print $4}' /var/log/messages | sort | uniq -c| sort -rnk
> 1,1
>
> gives
You need to do this in the 'engine' database instead of 'postgres'.
El 2016-07-06 13:41, Matt . escribió:
HI,
Thanks for the solution, I actually get:
postgres=# select vm_name, snapshots.description as snapshot_name,
snapshot_id from snapshots join vm_static on vm_id=vm_guid where
El 2016-07-06 11:11, nico...@devels.es escribió:
Hi Arik,
El 2016-07-06 10:27, Arik Hadas escribió:
Hi,
This is a bit aggressive solution to remove all snapshots with the
memory.
Can you confirm that a storage domain that was active while creating
the snapshot with memory was removed from
HI,
Thanks for the solution, I actually get:
postgres=# select vm_name, snapshots.description as snapshot_name,
snapshot_id from snapshots join vm_static on vm_id=vm_guid where
CAST(split_part(memory_volume, ',', 1) AS UUID) not in (select id from
storage_domain_static);
ERROR: relation
Sorry it's a standard Ubuntu, not Ubuntu-Mate
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
- Original Message -
> From: "Gianluca Cecchi"
> To: "users"
> Sent: Tuesday, July 5, 2016 11:16:54 AM
> Subject: [ovirt-users] messages file filled by vdsm logs in 4.0
> Hello,
> since updating to 4.0 yesterday, my /var/log/messages on
Hello there,
With oVirt 4.0 Release is running oVirt Node in a SD Card or USB Stick
supported where the system boots in memory and only writes configuration
changes to permanent storage similar to what VMware ESXi does ?
This is very useful and can save a significant amount on CAPEX and
This is what happens when I try to start the ovirt-guest-agent in Ubuntu-Mate
16.04 Xenial, any ideas ?
/etc/init.d/ovirt-guest-agent status
● ovirt-guest-agent.service - oVirt Guest Agent
Loaded: loaded (/lib/systemd/system/ovirt-guest-agent.service; disabled;
vendor preset: enabled)
- Original Message -
> From: "Arman Khalatyan"
> To: "users"
> Sent: Monday, July 4, 2016 11:52:24 AM
> Subject: [ovirt-users] Is it possible to disable qxl video?
> Hi,
> I am doing PCI Passthrough for GPUs.
> Is it possible somehow to
That looks like an anaconda issue, can you wipe the start and end of your
disks with dd and try again
On Jul 6, 2016 5:12 AM, "Roger Meier" wrote:
> Hi,
>
> I defined software raid in the storage stage during the installation. How
> can i access the logfiles? Because
>
On Wed, Jul 6, 2016 at 2:17 PM, wrote:
> Hi,
>
> We just upgraded to oVirt 4.0, everything seems to be working but in our
> logs we see an exception for /ovirt-engine-reports continuously. Any call to
> /ovirt-engine-reports generates a 503 error.
>
> I'm attaching the full
On Wed, Jul 6, 2016 at 12:18 AM, David Twersky wrote:
> We use a lot of flash arrays, and some of them require that devices be 4k
> aligned, is it possible to create a Fibre Channel Storage Domain and have it
> 4k aligned?
I don't think we support this.
For example, we
Hi,
We just upgraded to oVirt 4.0, everything seems to be working but in our
logs we see an exception for /ovirt-engine-reports continuously. Any
call to /ovirt-engine-reports generates a 503 error.
I'm attaching the full exception.
Any hints?
Thanks.2016-07-06 12:10:03,729 ERROR
Hi Arik,
El 2016-07-06 10:27, Arik Hadas escribió:
Hi,
This is a bit aggressive solution to remove all snapshots with the
memory.
Can you confirm that a storage domain that was active while creating
the snapshot with memory was removed from the system?
This is something that was not covered
Hi,
This is a bit aggressive solution to remove all snapshots with the memory.
Can you confirm that a storage domain that was active while creating the
snapshot with memory was removed from the system?
This is something that was not covered and could lead to the reported issue.
Until we come
Hi,
I defined software raid in the storage stage during the installation.
How can i access the logfiles? Because
when i try to switch via ctrl+alt i don't find any shell prompt like on
the normal installation of CentOS, etc.
I can try to do a video, and strip it down. Which parts do you need from
A Bugzilla search on the 4.0 milestones MODIFIED\ON_QA\VERIFIED will
provide you with a full list.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary
Hi,
We have had a similar issue when upgrading, digging into it we found out
that this was caused by snapshots that had the "Save memory" option
enabled. We finally ended up deleting any snapshot that had this option
enabled and then we tried to upgrade, this time the process went smooth.
We use a lot of flash arrays, and some of them require that devices be 4k
aligned, is it possible to create a Fibre Channel Storage Domain and have
it 4k aligned?
--
David Twersky
___
Users mailing list
Users@ovirt.org
Hi Yevgeny,
Thanks for your help.
No luck yet!
Q: IIUC, ovirt-engine and its host are vSphere VMs. Then, a kind of
no-macspoof should be applied from the vSphere side.
A: I'm not exactly sure what setting this would be on the vmware side but
we have ensured the following settings are enabled;
Thanks! No specific reasons. I use IP in ovirt 3.6 and it seems simple to use
an IP address in some cases.
From: Yedidyah Bar David
Date: 2016-07-06 14:26
To: qinglong.d...@horebdata.cn
CC: users; 胡茂荣; 胡晓宇
Subject: Re: [ovirt-users] ovirt 4.0 engine access
On Wed, Jul 6, 2016 at 9:13 AM,
Hi Melissa
Can you attach the engine logs?
Thanks,
Oved
On Wed, Jul 6, 2016 at 5:08 AM, Melissa Mesler
wrote:
> I am running 4.0 on CentOS 7.2. Sometimes when I first log in to the
> admin page, it will give me and error that says "Request state does not
> match session
On Wed, Jul 6, 2016 at 9:30 AM, Abisai Matangira
wrote:
> Thank you for the revert
>
> How do we import the stoarage domain
Perhaps search google for "ovirt import storage domain"?
Best,
>
> From: Yedidyah Bar David
Thank you for the revert
How do we import the stoarage domain
From: Yedidyah Bar David [d...@redhat.com]
Sent: Wednesday, July 06, 2016 8:23 AM
To: Abisai Matangira
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Ovirt engine down , can we manually start vm
On Wed, Jul 6, 2016 at 9:13 AM, qinglong.d...@horebdata.cn
wrote:
> Hi, all
> I am using ovirt 4.0. It seems that I could only use FQDN to access
> the website of engine. Is it possible to use IP to access the website?
No.
You can only access the engine using
On Wed, Jul 6, 2016 at 6:00 AM, Abisai Matangira
wrote:
> Our Ovirt engine is down and can't be restored because it had no babckup
>
>
>
> Is it possible to manually start a vm on a ovirt node ?
It might be doable, but definitely not easy.
If there is no chance to
Hi, all
I am using ovirt 4.0. It seems that I could only use FQDN to access the
website of engine. Is it possible to use IP to access the website?
Anyone can help? Thanks!
___
Users mailing list
Users@ovirt.org
48 matches
Mail list logo