Re: [ovirt-users] I need help! Can not run ovirt-engine
On Sun, Feb 19, 2017 at 12:42 PM, Денис Мишанин wrote:
> Hello.
> After restarting the ISCSI storage I can not run ovirt-engine in prodation
> use I am looking for help
You have this in vdsm.log:
Thread-640::DEBUG::2017-02-19
13:40:35,756::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/taskset
--cpu-list 0-23 /usr/bin/sudo -n /usr/sbin/lvm vgs --config ' devices
{ preferred_names = [
"^/dev/mapper/"] ignore_suspended_devices=1 write_cache_state=0
disable_after_error_count=3 filter = [
'\''a|/dev/mapper/3600605b00a20bf201e29c6bf236a6651|'\'',
'\''r|.*|'\'' ] } global {
locking_type=1 prioritise_write_locks=1 wait_for_locks=1
use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } '
--noheadings --units b --nosuffix --separator '|' --ignoreskippe
dcluster -o
uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name
c7c466c5-983d-40b2-8f8c-d569755281f5 (cwd None)
Thread-640::DEBUG::2017-02-19
13:40:35,784::lvm::288::Storage.Misc.excCmd::(cmd) FAILED: = '
WARNING: Not using lvmetad because config setting use_lvmetad=0.\n
WARNING: To avoid cor
ruption, rescan devices to make changes visible (pvscan --cache).\n
Volume group "c7c466c5-983d-40b2-8f8c-d569755281f5" not found\n
Cannot process volume group c7c466c5-983d-40b2-8f8c-d56
9755281f5\n'; = 5
Thread-640::WARNING::2017-02-19
13:40:35,785::lvm::376::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 []
[' WARNING: Not using lvmetad because config setting use_lvmetad=0.',
' WARNING: To
avoid corruption, rescan devices to make changes visible (pvscan
--cache).', ' Volume group "c7c466c5-983d-40b2-8f8c-d569755281f5" not
found', ' Cannot process volume group c7c466c5-983d-
40b2-8f8c-d569755281f5']
Not sure what might have caused this.
Is your iSCSI storage ok after the reboot?
You might try to reboot the client (host) or further debug it on
kernel/iSCSI level. Check e.g. 'lsblk', iscsiadm, etc.
Best,
--
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] I need help! Can not run ovirt-engine
Is that on the hosted engine? Or separate bare machine? Am 19.02.2017 11:42 vorm. schrieb "Денис Мишанин" : Hello. After restarting the ISCSI storage I can not run ovirt-engine in prodation use I am looking for help ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ANN] oVirt 4.1.1 Second Test compose
On Thu, Feb 16, 2017 at 4:41 PM, Sandro Bonazzola wrote: > The oVirt Project is pleased to announce the availability of the Second > Test Compose of oVirt 4.1.1 for testing, as of February 16th, 2017 > > This is pre-release software. Please take a look at our community page[1] > to know how to ask questions and interact with developers and users. > All issues or bugs should be reported via oVirt Bugzilla[2]. > This pre-release should not to be used in production. > > This update is a test compose allowing to test fixes included in ovirt-4.1.1 > since > 4.1.0 release. > See the release notes [3] for installation / upgrade instructions and a > list of new features and bugs fixed. > > > This release is available now for: > * Fedora 24 (tech preview) > * Red Hat Enterprise Linux 7.3 or later > * CentOS Linux (or similar) 7.3 or later > > This release supports Hypervisor Hosts running: > * Red Hat Enterprise Linux 7.3 or later > * CentOS Linux (or similar) 7.3 or later > * Fedora 24 (tech preview) > > See the release notes draft [3] for installation / upgrade instructions and > a list of new features and bugs fixed. > > Notes: > - oVirt Live and oVirt Engine appliance has been already built [4] > - oVirt Node has not been built for this test compose. > > Additional Resources: > * Read more about the oVirt 4.1.1 release > highlights:http://www.ovirt.org/release/4.1.1/ One correction - the url on that page is broken: yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41pre.rpm The correct rpm url seems to be: yum instal http://resources.ovirt.org/pub/yum-repo/ovirt-release41-pre.rpm > * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt > * Check out the latest project news on the oVirt > blog:http://www.ovirt.org/blog/ > > [1] https://www.ovirt.org/community/ > [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt > [3] http://www.ovirt.org/release/4.1.1/ > [4] http://resources.ovirt.org/pub/ovirt-4.1-pre/iso/ > > > -- > Sandro Bonazzola > Better technology. Faster innovation. Powered by community collaboration. > See how it works at redhat.com > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Change Vlan ID's which are connected to the Host/VM's
Hi Alona,
I must say, I removed the network from the host but the VM's still
have it on their nics and that is the issue and stop me from changing
the networkname. In my opinion nothing affects changing the name when
it's only on the VM and the VM is down.
I hope we can work something out on that part, the hosts is not the
issue, I can manage that with removing the networklabel from the
network so it get's removed from the host.
Cheers,
Matt
2017-02-19 15:28 GMT+01:00 Matt . :
> Hi,
>
> Yes I saw it's not ideal to do this using the DB.
>
> It would be nice if it's possible to change it if the using VM's are down.
>
> Cheers,
>
> Matt
>
> 2017-02-19 14:10 GMT+01:00 Alona Kaplan :
>> Hi Matt,
>>
>> It won't work.
>> The name is the key for the sync operation. So it cannot be out of sync.
>>
>> If you change the name via the db (which is highly not recommended!), the
>> network will be considered as a new one.
>> You will end up (after refreshing the capabilities) with unmanaged network
>> in the hosts (the network with the old name) and new network in the
>> dc/cluster that is not attached to any host.
>>
>>
>> Alona.
>>
>> On Sun, Feb 19, 2017 at 12:28 PM, Matt . wrote:
>>>
>>> Hi Micheal,
>>>
>>> OK, thanks for this, but what if I change them in the Database and
>>> resync ? As ovirtmgmt is seperate it should be able to control the
>>> hosts.
>>>
>>> I'm curious about that as I think that should work.
>>>
>>> Thanks,
>>>
>>> Matt
>>>
>>> 2017-02-19 10:30 GMT+01:00 Michael Burman :
>>> > Hi again
>>> >
>>> > This can't be changed.
>>> > When the network attached to host, it is used by vdsm and has a
>>> > vdsm-'network-name' which in use.
>>> > When it used by a VM, virsh using this name, so you can't change it,
>>> > unless
>>> > removing and detaching the network from VM and host.
>>> >
>>> > Best regards,
>>> >
>>> > On Fri, Feb 17, 2017 at 12:17 PM, Matt . wrote:
>>> >>
>>> >> OK, I just found out that it's not possible to change the network name
>>> >> when the network is attached to VM's as well. I wonder why that is
>>> >> because for VM's it's only DB stuff being done.
>>> >>
>>> >> Can't this be changed ?
>>> >>
>>> >> Thanks,
>>> >>
>>> >> Matt
>>> >>
>>> >> 2017-02-16 13:58 GMT+01:00 Matt . :
>>> >> > Hi,
>>> >> >
>>> >> > OK good to know. Why would it not be possible to change the name as
>>> >> > well ? I think it's not that difficult in the same command ?
>>> >> >
>>> >> > Cheers,
>>> >> >
>>> >> > Matt
>>> >> >
>>> >> > 2017-02-16 13:54 GMT+01:00 Michael Burman :
>>> >> >> Hi Matt
>>> >> >>
>>> >> >> Are you trying to change the network's name? if this is the case,
>>> >> >> then
>>> >> >> it
>>> >> >> doesn't allowed while network is attached to host/s.
>>> >> >>
>>> >> >> Yes, it is a bug in the error message when trying to rename network
>>> >> >> while it
>>> >> >> is attached to multiple hosts. I will report a bug for this issue.
>>> >> >>
>>> >> >> Thanks!
>>> >> >>
>>> >> >> On Thu, Feb 16, 2017 at 2:41 PM, Matt .
>>> >> >> wrote:
>>> >> >>>
>>> >> >>> Hi Micheal,
>>> >> >>>
>>> >> >>> I trying pro process the change the issue is that I still get the
>>> >> >>> message (with some variable bug in it) that some hosts have the
>>> >> >>> logical network in usage. Is this Only on the name of the network ?
>>> >> >>>
>>> >> >>> I'm on Ovirt 4.0.6
>>> >> >>>
>>> >> >>> Error while executing action: Cannot edit Network. This logical
>>> >> >>> network is used by hosts:
>>> >> >>> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}):
>>> >> >>> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST}
>>> >> >>> - Please detach hosts using this logical network and try again.
>>> >> >>>
>>> >> >>> Thanks,
>>> >> >>>
>>> >> >>> Matt
>>> >> >>>
>>> >> >>> 2017-02-15 9:46 GMT+01:00 Matt . :
>>> >> >>> > HI Micheal,
>>> >> >>> >
>>> >> >>> > Thanks! it looks like it's what I need, checking out!
>>> >> >>> >
>>> >> >>> > Thank you very much!
>>> >> >>> >
>>> >> >>> > Matt
>>> >> >>> >
>>> >> >>> > 2017-02-15 7:12 GMT+01:00 Michael Burman :
>>> >> >>> >> Check this feature page as well)
>>> >> >>> >>
>>> >> >>> >>
>>> >> >>> >>
>>> >> >>> >>
>>> >> >>> >> http://www.ovirt.org/develop/release-management/features/network/multihostnetworkconfiguration/
>>> >> >>> >>
>>> >> >>> >>
>>> >> >>> >>
>>> >> >>> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman
>>> >> >>> >>
>>> >> >>> >> wrote:
>>> >> >>> >>>
>>> >> >>> >>> Hello Matt
>>> >> >>> >>>
>>> >> >>> >>> Yes, there is a way, it can be done as part of our MultiHost
>>> >> >>> >>> Network
>>> >> >>> >>> feature(since 3.4).
>>> >> >>> >>> If you have the same logical network attached to multiple hosts
>>> >> >>> >>> in
>>> >> >>> >>> your
>>> >> >>> >>> DC, you can update their vlan IDs via the 'Networks' main tab
>>> >> >>> >>> and
>>> >> >>> >>> this
>>> >> >>> >>> will
>>> >> >>> >>> send a setup networks command through all of your hosts in the
>>> >> >>> >>> DC
>>> >> >>> >>> and
>>> >> >>> >>> update
>>> >> >>> >>> the logical network with the
Re: [ovirt-users] Change Vlan ID's which are connected to the Host/VM's
Hi,
Yes I saw it's not ideal to do this using the DB.
It would be nice if it's possible to change it if the using VM's are down.
Cheers,
Matt
2017-02-19 14:10 GMT+01:00 Alona Kaplan :
> Hi Matt,
>
> It won't work.
> The name is the key for the sync operation. So it cannot be out of sync.
>
> If you change the name via the db (which is highly not recommended!), the
> network will be considered as a new one.
> You will end up (after refreshing the capabilities) with unmanaged network
> in the hosts (the network with the old name) and new network in the
> dc/cluster that is not attached to any host.
>
>
> Alona.
>
> On Sun, Feb 19, 2017 at 12:28 PM, Matt . wrote:
>>
>> Hi Micheal,
>>
>> OK, thanks for this, but what if I change them in the Database and
>> resync ? As ovirtmgmt is seperate it should be able to control the
>> hosts.
>>
>> I'm curious about that as I think that should work.
>>
>> Thanks,
>>
>> Matt
>>
>> 2017-02-19 10:30 GMT+01:00 Michael Burman :
>> > Hi again
>> >
>> > This can't be changed.
>> > When the network attached to host, it is used by vdsm and has a
>> > vdsm-'network-name' which in use.
>> > When it used by a VM, virsh using this name, so you can't change it,
>> > unless
>> > removing and detaching the network from VM and host.
>> >
>> > Best regards,
>> >
>> > On Fri, Feb 17, 2017 at 12:17 PM, Matt . wrote:
>> >>
>> >> OK, I just found out that it's not possible to change the network name
>> >> when the network is attached to VM's as well. I wonder why that is
>> >> because for VM's it's only DB stuff being done.
>> >>
>> >> Can't this be changed ?
>> >>
>> >> Thanks,
>> >>
>> >> Matt
>> >>
>> >> 2017-02-16 13:58 GMT+01:00 Matt . :
>> >> > Hi,
>> >> >
>> >> > OK good to know. Why would it not be possible to change the name as
>> >> > well ? I think it's not that difficult in the same command ?
>> >> >
>> >> > Cheers,
>> >> >
>> >> > Matt
>> >> >
>> >> > 2017-02-16 13:54 GMT+01:00 Michael Burman :
>> >> >> Hi Matt
>> >> >>
>> >> >> Are you trying to change the network's name? if this is the case,
>> >> >> then
>> >> >> it
>> >> >> doesn't allowed while network is attached to host/s.
>> >> >>
>> >> >> Yes, it is a bug in the error message when trying to rename network
>> >> >> while it
>> >> >> is attached to multiple hosts. I will report a bug for this issue.
>> >> >>
>> >> >> Thanks!
>> >> >>
>> >> >> On Thu, Feb 16, 2017 at 2:41 PM, Matt .
>> >> >> wrote:
>> >> >>>
>> >> >>> Hi Micheal,
>> >> >>>
>> >> >>> I trying pro process the change the issue is that I still get the
>> >> >>> message (with some variable bug in it) that some hosts have the
>> >> >>> logical network in usage. Is this Only on the name of the network ?
>> >> >>>
>> >> >>> I'm on Ovirt 4.0.6
>> >> >>>
>> >> >>> Error while executing action: Cannot edit Network. This logical
>> >> >>> network is used by hosts:
>> >> >>> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}):
>> >> >>> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST}
>> >> >>> - Please detach hosts using this logical network and try again.
>> >> >>>
>> >> >>> Thanks,
>> >> >>>
>> >> >>> Matt
>> >> >>>
>> >> >>> 2017-02-15 9:46 GMT+01:00 Matt . :
>> >> >>> > HI Micheal,
>> >> >>> >
>> >> >>> > Thanks! it looks like it's what I need, checking out!
>> >> >>> >
>> >> >>> > Thank you very much!
>> >> >>> >
>> >> >>> > Matt
>> >> >>> >
>> >> >>> > 2017-02-15 7:12 GMT+01:00 Michael Burman :
>> >> >>> >> Check this feature page as well)
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> http://www.ovirt.org/develop/release-management/features/network/multihostnetworkconfiguration/
>> >> >>> >>
>> >> >>> >>
>> >> >>> >>
>> >> >>> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman
>> >> >>> >>
>> >> >>> >> wrote:
>> >> >>> >>>
>> >> >>> >>> Hello Matt
>> >> >>> >>>
>> >> >>> >>> Yes, there is a way, it can be done as part of our MultiHost
>> >> >>> >>> Network
>> >> >>> >>> feature(since 3.4).
>> >> >>> >>> If you have the same logical network attached to multiple hosts
>> >> >>> >>> in
>> >> >>> >>> your
>> >> >>> >>> DC, you can update their vlan IDs via the 'Networks' main tab
>> >> >>> >>> and
>> >> >>> >>> this
>> >> >>> >>> will
>> >> >>> >>> send a setup networks command through all of your hosts in the
>> >> >>> >>> DC
>> >> >>> >>> and
>> >> >>> >>> update
>> >> >>> >>> the logical network with the new vlan ID.
>> >> >>> >>> - Note that this can be done when the VMs are running on the
>> >> >>> >>> host/s as
>> >> >>> >>> well.
>> >> >>> >>>
>> >> >>> >>> Good luck)
>> >> >>> >>>
>> >> >>> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt .
>> >> >>> >>>
>> >> >>> >>> wrote:
>> >> >>>
>> >> >>> Hi Guys,
>> >> >>>
>> >> >>> Is there a way to change Vlan ID's which are connected to the
>> >> >>> Hosts
>> >> >>> when the VM's on it are down ?
>> >> >>>
>> >> >>> As i need to change a lot of them it would be create if the
>> >> >>> engine
>> >> >>> can
>> >> >>> perform some process wh
Re: [ovirt-users] Change Vlan ID's which are connected to the Host/VM's
Hi Matt,
It won't work.
The name is the key for the sync operation. So it cannot be out of sync.
If you change the name via the db (which is highly not recommended!), the
network will be considered as a new one.
You will end up (after refreshing the capabilities) with unmanaged network
in the hosts (the network with the old name) and new network in the
dc/cluster that is not attached to any host.
Alona.
On Sun, Feb 19, 2017 at 12:28 PM, Matt . wrote:
> Hi Micheal,
>
> OK, thanks for this, but what if I change them in the Database and
> resync ? As ovirtmgmt is seperate it should be able to control the
> hosts.
>
> I'm curious about that as I think that should work.
>
> Thanks,
>
> Matt
>
> 2017-02-19 10:30 GMT+01:00 Michael Burman :
> > Hi again
> >
> > This can't be changed.
> > When the network attached to host, it is used by vdsm and has a
> > vdsm-'network-name' which in use.
> > When it used by a VM, virsh using this name, so you can't change it,
> unless
> > removing and detaching the network from VM and host.
> >
> > Best regards,
> >
> > On Fri, Feb 17, 2017 at 12:17 PM, Matt . wrote:
> >>
> >> OK, I just found out that it's not possible to change the network name
> >> when the network is attached to VM's as well. I wonder why that is
> >> because for VM's it's only DB stuff being done.
> >>
> >> Can't this be changed ?
> >>
> >> Thanks,
> >>
> >> Matt
> >>
> >> 2017-02-16 13:58 GMT+01:00 Matt . :
> >> > Hi,
> >> >
> >> > OK good to know. Why would it not be possible to change the name as
> >> > well ? I think it's not that difficult in the same command ?
> >> >
> >> > Cheers,
> >> >
> >> > Matt
> >> >
> >> > 2017-02-16 13:54 GMT+01:00 Michael Burman :
> >> >> Hi Matt
> >> >>
> >> >> Are you trying to change the network's name? if this is the case,
> then
> >> >> it
> >> >> doesn't allowed while network is attached to host/s.
> >> >>
> >> >> Yes, it is a bug in the error message when trying to rename network
> >> >> while it
> >> >> is attached to multiple hosts. I will report a bug for this issue.
> >> >>
> >> >> Thanks!
> >> >>
> >> >> On Thu, Feb 16, 2017 at 2:41 PM, Matt .
> wrote:
> >> >>>
> >> >>> Hi Micheal,
> >> >>>
> >> >>> I trying pro process the change the issue is that I still get the
> >> >>> message (with some variable bug in it) that some hosts have the
> >> >>> logical network in usage. Is this Only on the name of the network ?
> >> >>>
> >> >>> I'm on Ovirt 4.0.6
> >> >>>
> >> >>> Error while executing action: Cannot edit Network. This logical
> >> >>> network is used by hosts:
> >> >>> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}):
> >> >>> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST}
> >> >>> - Please detach hosts using this logical network and try again.
> >> >>>
> >> >>> Thanks,
> >> >>>
> >> >>> Matt
> >> >>>
> >> >>> 2017-02-15 9:46 GMT+01:00 Matt . :
> >> >>> > HI Micheal,
> >> >>> >
> >> >>> > Thanks! it looks like it's what I need, checking out!
> >> >>> >
> >> >>> > Thank you very much!
> >> >>> >
> >> >>> > Matt
> >> >>> >
> >> >>> > 2017-02-15 7:12 GMT+01:00 Michael Burman :
> >> >>> >> Check this feature page as well)
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> http://www.ovirt.org/develop/release-management/features/
> network/multihostnetworkconfiguration/
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman
> >> >>> >>
> >> >>> >> wrote:
> >> >>> >>>
> >> >>> >>> Hello Matt
> >> >>> >>>
> >> >>> >>> Yes, there is a way, it can be done as part of our MultiHost
> >> >>> >>> Network
> >> >>> >>> feature(since 3.4).
> >> >>> >>> If you have the same logical network attached to multiple hosts
> in
> >> >>> >>> your
> >> >>> >>> DC, you can update their vlan IDs via the 'Networks' main tab
> and
> >> >>> >>> this
> >> >>> >>> will
> >> >>> >>> send a setup networks command through all of your hosts in the
> DC
> >> >>> >>> and
> >> >>> >>> update
> >> >>> >>> the logical network with the new vlan ID.
> >> >>> >>> - Note that this can be done when the VMs are running on the
> >> >>> >>> host/s as
> >> >>> >>> well.
> >> >>> >>>
> >> >>> >>> Good luck)
> >> >>> >>>
> >> >>> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt . <
> yamakasi@gmail.com>
> >> >>> >>> wrote:
> >> >>>
> >> >>> Hi Guys,
> >> >>>
> >> >>> Is there a way to change Vlan ID's which are connected to the
> >> >>> Hosts
> >> >>> when the VM's on it are down ?
> >> >>>
> >> >>> As i need to change a lot of them it would be create if the
> >> >>> engine
> >> >>> can
> >> >>> perform some process which allows me to hammer my hosts with
> the
> >> >>> new
> >> >>> vlan ID's for their bridges.
> >> >>>
> >> >>> I hope someone has an idea.
> >> >>>
> >> >>> Thanks!
> >> >>>
> >> >>> Matt
> >> >>> ___
> >> >>> Users mailing list
> >> >>> Users@ovirt.org
> >> >>> http://lists.ovirt.org/mailman
Re: [ovirt-users] Change Vlan ID's which are connected to the Host/VM's
Hi Micheal,
OK, thanks for this, but what if I change them in the Database and
resync ? As ovirtmgmt is seperate it should be able to control the
hosts.
I'm curious about that as I think that should work.
Thanks,
Matt
2017-02-19 10:30 GMT+01:00 Michael Burman :
> Hi again
>
> This can't be changed.
> When the network attached to host, it is used by vdsm and has a
> vdsm-'network-name' which in use.
> When it used by a VM, virsh using this name, so you can't change it, unless
> removing and detaching the network from VM and host.
>
> Best regards,
>
> On Fri, Feb 17, 2017 at 12:17 PM, Matt . wrote:
>>
>> OK, I just found out that it's not possible to change the network name
>> when the network is attached to VM's as well. I wonder why that is
>> because for VM's it's only DB stuff being done.
>>
>> Can't this be changed ?
>>
>> Thanks,
>>
>> Matt
>>
>> 2017-02-16 13:58 GMT+01:00 Matt . :
>> > Hi,
>> >
>> > OK good to know. Why would it not be possible to change the name as
>> > well ? I think it's not that difficult in the same command ?
>> >
>> > Cheers,
>> >
>> > Matt
>> >
>> > 2017-02-16 13:54 GMT+01:00 Michael Burman :
>> >> Hi Matt
>> >>
>> >> Are you trying to change the network's name? if this is the case, then
>> >> it
>> >> doesn't allowed while network is attached to host/s.
>> >>
>> >> Yes, it is a bug in the error message when trying to rename network
>> >> while it
>> >> is attached to multiple hosts. I will report a bug for this issue.
>> >>
>> >> Thanks!
>> >>
>> >> On Thu, Feb 16, 2017 at 2:41 PM, Matt . wrote:
>> >>>
>> >>> Hi Micheal,
>> >>>
>> >>> I trying pro process the change the issue is that I still get the
>> >>> message (with some variable bug in it) that some hosts have the
>> >>> logical network in usage. Is this Only on the name of the network ?
>> >>>
>> >>> I'm on Ovirt 4.0.6
>> >>>
>> >>> Error while executing action: Cannot edit Network. This logical
>> >>> network is used by hosts:
>> >>> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}):
>> >>> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST}
>> >>> - Please detach hosts using this logical network and try again.
>> >>>
>> >>> Thanks,
>> >>>
>> >>> Matt
>> >>>
>> >>> 2017-02-15 9:46 GMT+01:00 Matt . :
>> >>> > HI Micheal,
>> >>> >
>> >>> > Thanks! it looks like it's what I need, checking out!
>> >>> >
>> >>> > Thank you very much!
>> >>> >
>> >>> > Matt
>> >>> >
>> >>> > 2017-02-15 7:12 GMT+01:00 Michael Burman :
>> >>> >> Check this feature page as well)
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> http://www.ovirt.org/develop/release-management/features/network/multihostnetworkconfiguration/
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman
>> >>> >>
>> >>> >> wrote:
>> >>> >>>
>> >>> >>> Hello Matt
>> >>> >>>
>> >>> >>> Yes, there is a way, it can be done as part of our MultiHost
>> >>> >>> Network
>> >>> >>> feature(since 3.4).
>> >>> >>> If you have the same logical network attached to multiple hosts in
>> >>> >>> your
>> >>> >>> DC, you can update their vlan IDs via the 'Networks' main tab and
>> >>> >>> this
>> >>> >>> will
>> >>> >>> send a setup networks command through all of your hosts in the DC
>> >>> >>> and
>> >>> >>> update
>> >>> >>> the logical network with the new vlan ID.
>> >>> >>> - Note that this can be done when the VMs are running on the
>> >>> >>> host/s as
>> >>> >>> well.
>> >>> >>>
>> >>> >>> Good luck)
>> >>> >>>
>> >>> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt .
>> >>> >>> wrote:
>> >>>
>> >>> Hi Guys,
>> >>>
>> >>> Is there a way to change Vlan ID's which are connected to the
>> >>> Hosts
>> >>> when the VM's on it are down ?
>> >>>
>> >>> As i need to change a lot of them it would be create if the
>> >>> engine
>> >>> can
>> >>> perform some process which allows me to hammer my hosts with the
>> >>> new
>> >>> vlan ID's for their bridges.
>> >>>
>> >>> I hope someone has an idea.
>> >>>
>> >>> Thanks!
>> >>>
>> >>> Matt
>> >>> ___
>> >>> Users mailing list
>> >>> Users@ovirt.org
>> >>> http://lists.ovirt.org/mailman/listinfo/users
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>>
>> >>> >>> --
>> >>> >>> Michael Burman
>> >>> >>> RedHat Israel, RHV-M Network QE
>> >>> >>>
>> >>> >>> Mobile: 054-5355725
>> >>> >>> IRC: mburman
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >> --
>> >>> >> Michael Burman
>> >>> >> RedHat Israel, RHV-M Network QE
>> >>> >>
>> >>> >> Mobile: 054-5355725
>> >>> >> IRC: mburman
>> >>
>> >>
>> >>
>> >>
>> >> --
>> >> Michael Burman
>> >> RedHat Israel, RHV-M Network QE
>> >>
>> >> Mobile: 054-5355725
>> >> IRC: mburman
>
>
>
>
> --
> Michael Burman
> RedHat Israel, RHV-M Network QE
>
> Mobile: 054-5355725
> IRC: mburman
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Change Vlan ID's which are connected to the Host/VM's
Hi again
This can't be changed.
When the network attached to host, it is used by vdsm and has a
vdsm-'network-name' which in use.
When it used by a VM, virsh using this name, so you can't change it, unless
removing and detaching the network from VM and host.
Best regards,
On Fri, Feb 17, 2017 at 12:17 PM, Matt . wrote:
> OK, I just found out that it's not possible to change the network name
> when the network is attached to VM's as well. I wonder why that is
> because for VM's it's only DB stuff being done.
>
> Can't this be changed ?
>
> Thanks,
>
> Matt
>
> 2017-02-16 13:58 GMT+01:00 Matt . :
> > Hi,
> >
> > OK good to know. Why would it not be possible to change the name as
> > well ? I think it's not that difficult in the same command ?
> >
> > Cheers,
> >
> > Matt
> >
> > 2017-02-16 13:54 GMT+01:00 Michael Burman :
> >> Hi Matt
> >>
> >> Are you trying to change the network's name? if this is the case, then
> it
> >> doesn't allowed while network is attached to host/s.
> >>
> >> Yes, it is a bug in the error message when trying to rename network
> while it
> >> is attached to multiple hosts. I will report a bug for this issue.
> >>
> >> Thanks!
> >>
> >> On Thu, Feb 16, 2017 at 2:41 PM, Matt . wrote:
> >>>
> >>> Hi Micheal,
> >>>
> >>> I trying pro process the change the issue is that I still get the
> >>> message (with some variable bug in it) that some hosts have the
> >>> logical network in usage. Is this Only on the name of the network ?
> >>>
> >>> I'm on Ovirt 4.0.6
> >>>
> >>> Error while executing action: Cannot edit Network. This logical
> >>> network is used by hosts:
> >>> (${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST_COUNTER}):
> >>> ${ACTION_TYPE_FAILED_NETWORK_IN_ONE_USE_LIST}
> >>> - Please detach hosts using this logical network and try again.
> >>>
> >>> Thanks,
> >>>
> >>> Matt
> >>>
> >>> 2017-02-15 9:46 GMT+01:00 Matt . :
> >>> > HI Micheal,
> >>> >
> >>> > Thanks! it looks like it's what I need, checking out!
> >>> >
> >>> > Thank you very much!
> >>> >
> >>> > Matt
> >>> >
> >>> > 2017-02-15 7:12 GMT+01:00 Michael Burman :
> >>> >> Check this feature page as well)
> >>> >>
> >>> >>
> >>> >> http://www.ovirt.org/develop/release-management/features/network/
> multihostnetworkconfiguration/
> >>> >>
> >>> >>
> >>> >>
> >>> >> On Wed, Feb 15, 2017 at 8:06 AM, Michael Burman >
> >>> >> wrote:
> >>> >>>
> >>> >>> Hello Matt
> >>> >>>
> >>> >>> Yes, there is a way, it can be done as part of our MultiHost
> Network
> >>> >>> feature(since 3.4).
> >>> >>> If you have the same logical network attached to multiple hosts in
> >>> >>> your
> >>> >>> DC, you can update their vlan IDs via the 'Networks' main tab and
> this
> >>> >>> will
> >>> >>> send a setup networks command through all of your hosts in the DC
> and
> >>> >>> update
> >>> >>> the logical network with the new vlan ID.
> >>> >>> - Note that this can be done when the VMs are running on the
> host/s as
> >>> >>> well.
> >>> >>>
> >>> >>> Good luck)
> >>> >>>
> >>> >>> On Tue, Feb 14, 2017 at 11:51 PM, Matt .
> >>> >>> wrote:
> >>>
> >>> Hi Guys,
> >>>
> >>> Is there a way to change Vlan ID's which are connected to the
> Hosts
> >>> when the VM's on it are down ?
> >>>
> >>> As i need to change a lot of them it would be create if the engine
> >>> can
> >>> perform some process which allows me to hammer my hosts with the
> new
> >>> vlan ID's for their bridges.
> >>>
> >>> I hope someone has an idea.
> >>>
> >>> Thanks!
> >>>
> >>> Matt
> >>> ___
> >>> Users mailing list
> >>> Users@ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>>
> >>> >>> --
> >>> >>> Michael Burman
> >>> >>> RedHat Israel, RHV-M Network QE
> >>> >>>
> >>> >>> Mobile: 054-5355725
> >>> >>> IRC: mburman
> >>> >>
> >>> >>
> >>> >>
> >>> >>
> >>> >> --
> >>> >> Michael Burman
> >>> >> RedHat Israel, RHV-M Network QE
> >>> >>
> >>> >> Mobile: 054-5355725
> >>> >> IRC: mburman
> >>
> >>
> >>
> >>
> >> --
> >> Michael Burman
> >> RedHat Israel, RHV-M Network QE
> >>
> >> Mobile: 054-5355725
> >> IRC: mburman
>
--
Michael Burman
RedHat Israel, RHV-M Network QE
Mobile: 054-5355725
IRC: mburman
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
