On Tue, Dec 3, 2019 at 3:44 PM Robert Webb wrote:
>
> Didi,
>
> Thanks for the reply.
>
> Yes, backups are done, I am just thinking in the case of Murphy's Law where
> nothing works and the engine is gone. I am also new to oVirt and am always
> loking for the "proper" backup method as you have
Hey,
The problem what I have found is when I am using SPICE as default console
option, the console performance is very sluggish. So what I understand here is
one needs to install additional spice guest tools to improve the performance as
it includes QLX video driver.
What is your virtual GPU ?
I'm using QLX, and despite being sluggish, when you tune windows for best
performance -it is workable.
Of course, if you passthrough a GPU, performance will be completely different.
Best Regards,
Strahil NikolovOn Dec 3, 2019 21:19, Vijay Sachdeva
wrote:
>
> Anyone?
I tend to VNC my Windows VMs, including server. Last one I tested was
2019 Server, seemed to work ok.
On 12/3/19 1:19 PM, Vijay Sachdeva wrote:
Anyone?
On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva
mailto:vijay.sachd...@indiqus.com>> wrote:
Hello Everyone,
I managed to install
Hi Vijay,
Have you tried to run something in the VM?
I want to understand if the performance of the VM is slow, or just the
console access seems to be slow.
Thanks in advance,
On Tue, Dec 3, 2019 at 9:31 PM Vijay Sachdeva
wrote:
> Anyone?
>
> On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva
>
Take a look at vProtect for backups. Works really well for our
environment, and supports incremental backups as well which is very handy.
It's free for up to 10 VMs to try.
On Tue, Dec 3, 2019 at 4:20 PM Robert Webb wrote:
> Didi,
>
> Thanks for the reply.
>
> Yes, backups are done, I am just
Didi,
Thanks for the reply.
Yes, backups are done, I am just thinking in the case of Murphy's Law where
nothing works and the engine is gone. I am also new to oVirt and am always
loking for the "proper" backup method as you have laready mentioned using
engine-backup.
Storage is NFS backed
I'm currently running a stand alone server on 4.2.0.2-1.el7.centos. I know
this is an older version and I am trying to do some exports for migrations
off of it. The Export to OVA seems simple enough but it fails consistently
and I really can't figure out why. The logfiles don't provide a lot of
Also , I forgot to mention that there is a set of tools that can also be used
(as far as I know , they are a kind of experimental - so skip using them in
production ):
https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.173-2/
Any feedback can be
Anyone?
On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva
wrote:
> Hello Everyone,
>
> I managed to install Windows Server 2016 server on Ovirt node using ovirt
> engine.All virtio-Win drivers also installed, but the performance of
> Windows using console is very sluggish and mouse pointer is not
Usually I add a small disk of type virtio and another NIC (also virtio).Then
if you install , you set the windows DVD as bootable and once you reach the
moment to select your disk , you have an option to search in a DVD for
drivers.Then you go to Admin Portal , select your VM and from the 3
Hello Everyone,
I managed to install Windows Server 2016 server on Ovirt node using ovirt
engine.All virtio-Win drivers also installed, but the performance of
Windows using console is very sluggish and mouse pointer is not at all
responsive.
Can anyone let me know, what could be the reason. Not
Hi, I want to use External Logical Networks Openstack Neutron. For this it is
necessary to have all Openstack installed or is it possible to have only
Neutron and used as a service? Sorry if the question is very obvious but I am
starting now with this topic.
Hi Vijay,
Have you tried to load them from the VirtIO-Win ISO ?
Thanks in advance,
On Tue, Dec 3, 2019 at 3:30 PM Vijay Sachdeva
wrote:
> Hi Gal,
>
>
>
> I have downloaded the virtio-win_x86.vfd and uploaded to ISO domain. Used
> Run Once and attached the floppy drive, while looking for
I've seen vdsmd leak memory (RSS increasing) for a while, and never
gotten anywhere with diagnosing it. I upgraded a small setup (2 hosts
with hosted engine and iSCSI SAN) last week to 4.3.7 plus latest CentOS
7.7 updates, and I am still seeing this.
Currently, there are only 3 active VMs, plus
Anyone, please let me know. Really stuck at this point.
I am using Ovirt Manager 4.3 and while installing Windows VMs If I used disk
type as IDE, I can see the disks to install the OS but if I use virtIO-scsi for
disks the disk is not seen. So I attached floppy disk to VM, but it says no
Great, I hope Gianluca will be able to sync with the container version!
De: "Guillaume Pavese"
À: "Nathanaël Blanchet"
Cc: "Gianluca Cecchi" , "users"
Envoyé: Mardi 3 Décembre 2019 04:07:53
Objet: Re: [ovirt-users] Re: AWX and error using ovirt as an inventory source
My problem was
Hi Gal,
I have downloaded the virtio-win_x86.vfd and uploaded to ISO domain. Used Run
Once and attached the floppy drive, while looking for drivers in A drive it
gives below error:
I followed all the steps as per the guidelines shared in the document. Don’t
know what I am missing.
Going back to the user list, just in case it will be relevant to others
On Tue, Dec 3, 2019 at 3:02 PM Vijay Sachdeva
wrote:
> Hi Gal,
>
>
>
> Thank you so much for replying, can you please a steps to do that. Right
> now what I am doing is:
>
>
>
>1. Installed Windows 2016 using IDE
Yes. I'm doing some works arround to see if I can get the domain moved to
an ISCSI lun, but as the original domain was on glusterfs, I'm dealing now
with gluster stuff.
Regards
El dom., 1 de diciembre de 2019 5:15 a. m., Amit Bawer
escribió:
>
>
> On Sun, Dec 1, 2019 at 1:32 AM
> We are using Ceph with oVirt (via standalone Cinder) extensively in a
> production environment.
> I tested oVirt cinderlib integration in our dev environment, gave some
> feedback here on the list and am currently waiting for the future
> development. IMHO cinderlib in oVirt is currently not fit
Dear Team,
How can we install virtIO windows drivers to Windows 2016. As of now I tried to
attach floppy drive with virtio-win.vfd image but while installing drivers
didn’t get loaded.
Please guide or let me know the proper way to install drivers.
Vijay Sachdeva
Am 24.11.19 um 11:58 schrieb Benny Zlotnik:
The current plan to integrate ceph is via cinderlib integration[1]
(currently in tech preview mode) because we still have no packaging
ready, there are some manual installation steps required, but there is
no need to install and configure
Hi,
does anybody have an advice how to activate or safely remove that storage
domain?
Thank you!
Oliver
-Ursprüngliche Nachricht-
Von: Oliver Albl
Gesendet: Dienstag, 5. November 2019 11:20
An: users@ovirt.org
Betreff: [ovirt-users] Re: Cannot activate/deactivate storage domain
>
On Tue, Dec 3, 2019 at 4:38 AM wrote:
>
> So thinking about my setup, I am thinking through different failure scenarios.
>
> So lets say I have a small physical server with 8 cores and 16GB RAM and I
> install Centos 7 and ovirt-engine on bare metal. This would also be the same
> scenario is
Hello,
as far as i remember from my certification course, ovirt/rhv 3.5 is
still based on 6. So you can easily upgrade in place and then make
detach/attach.
Luca
On Tue, Dec 3, 2019 at 9:13 AM wrote:
>
> I have found also this topic:
>
> https://access.redhat.com/articles/1390733
>
> "RHEV 3.5
Is there no one who has an idea ...? ;(
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
I have found also this topic:
https://access.redhat.com/articles/1390733
"RHEV 3.5 supports both RHEL6 and RHEL7 hosts (RHEL or RHEV-H). It is
recommended to upgrade your hosts to RHEL7 once on RHEV 3.5."
If this is true i could make an update of the hypervisors 6 and not a reinstall
with
28 matches
Mail list logo
