[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

On Thu, Feb 6, 2020 at 11:07 AM Jorick Astrego wrote: > Hi, > > Something weird is going on with our ovirt node 4.3.8 install mounting a > nfs share. > > We have a NFS domain for a couple of backup disks and we have a couple of > 4.2 nodes connected to it. > > Now I'm adding a fresh cluster of

[ovirt-users] issue connecting 4.3.8 node to nfs domain

Hi, Something weird is going on with our ovirt node 4.3.8 install mounting a nfs share. We have a NFS domain for a couple of backup disks and we have a couple of 4.2 nodes connected to it. Now I'm adding a fresh cluster of 4.3.8 nodes and the backupnfs mount doesn't work. (annoying you cannot

[ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at datacenter level"

Mode 4 requires support and configuration on your switches Mode 1 should be the most compatible one ; I think Mode 2 supports tagged vlan too but I had some problems when I tried it Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group On Thu, Feb 6, 2020 at 5:45 AM wrote: > I have a

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

On Thu, Feb 6, 2020 at 1:19 PM Jorick Astrego wrote: > > On 2/6/20 12:08 PM, Gianluca Cecchi wrote: > > On Thu, Feb 6, 2020 at 10:07 AM Jorick Astrego wrote: > >> Hi, >> > [snip] > >> (annoying you cannot copy the text from the events view) >> >> > I don't know if I understood correctly your

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

On Thu, Feb 6, 2020 at 10:07 AM Jorick Astrego wrote: > Hi, > [snip] > (annoying you cannot copy the text from the events view) > > I don't know if I understood correctly your concern, but in my case if I go in Hosts --> Events and double click on a line I have a pop-up window named "Event

[ovirt-users] OVN issues: no connectivity between VMs on same host

Hi I am getting some problems setting up an internal networks for our oVirt VMs using the OVN external provider. The ovn-provider was setup during the ovirt engine installation (version 4.3.7.2-1.el7). I then just created a new network with the ovn external provider and tested the

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

On 2/6/20 12:08 PM, Gianluca Cecchi wrote: > On Thu, Feb 6, 2020 at 10:07 AM Jorick Astrego > wrote: > > Hi, > > [snip]  > > (annoying you cannot copy the text from the events view) > > > > I don't know if I understood correctly your concern, but in my case if

[ovirt-users] Re: [Suspected Spam] Re: [Suspected Spam] Re: Unsynced entries do not self-heal during upgrade from oVirt 4.2 -> 4.3

On February 6, 2020 9:42:13 AM GMT+02:00, "Goorkate, B.J." wrote: >Hi Strahil, > >The 0-xlator-message still occurs, but not frequent. Yesterdag a couple >of times, but the 4th there were no entries at all. > >What I did find out, was that the unsynced entries belonged to >VM-images which were

[ovirt-users] Re: Emergency :/ No VMs starting

Appreciate the updates you've been posting. It's concerning to me as a Gluster user as well. It would be nice to figure out what happened here. On Thu, Feb 6, 2020 at 11:43 AM Christian Reiss wrote: > Hey, > > For prosperity: Sadly the only way to fix this was to re-init (wipe) > gluster and

[ovirt-users] Update hosted engine to 4.3.8 from 4.3.7 questions

I'd like to update my hosted engine to version 4.3.8 from 4.3.7, but have concerns. First, on the hosted engine, yum reports that several packages are version locked. Specifically: 0:ovirt-engine-webadmin-portal-4.3.8.2-1.el7.* 0:ovirt-engine-dwh-4.3.8-1.el7.*

[ovirt-users] Re: Emergency :/ No VMs starting

Hey, For prosperity: Sadly the only way to fix this was to re-init (wipe) gluster and start from scratch. -Chris. On 03/02/2020 19:23, Strahil Nikolov wrote: On February 3, 2020 2:29:55 PM GMT+02:00, Christian Reiss wrote: Ugh, disregarding off all previous stamenets: new findinds:

[ovirt-users] Backup Solution

Hey folks, Running a 3-way HCI (again (sigh)) on gluster. Now the _inside_ of the vms is backup'ed seperatly using bareos on an hourly basis, so files are present with worst case 59 minutes data loss. Now, on the outside I thought of doing gluster snapshots and then syncing those .snap dirs

[ovirt-users] where can I find the repositories specific to 4.3.7

Hi am trying to upgrade our ovirt hosts and engine in our Hyperconverged 4.3.6 environment to 4.3.7, we do not want to go to 4.3.8. Where can I find the correct repositories for 4.3.7 specific to the engine and the ones for the hosts? Thank you Adrian

[ovirt-users] Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version

Hi, I have upgraded yesterday one of our ovirt environments from 4.2.8 to 4.3.8. We have a hosted engine, 25 hosts and about 150 VMs running there. After upgrading the cluster compatibility version from 4.2 to 4.3, I have seen a huge increase of CPU load on the engine VM. The engine had 4 cores

[ovirt-users] Re: Update hosted engine to 4.3.8 from 4.3.7 questions

On February 6, 2020 6:21:02 PM GMT+02:00, d...@bornfree.org wrote: >I'd like to update my hosted engine to version 4.3.8 from 4.3.7, but >have concerns. > >First, on the hosted engine, yum reports that several packages are >version locked. Specifically:

[ovirt-users] Re: Backup Solution

I understand your concerns and don't have very much personal experience with geo-replication either, aside from knowing it's recommended in the RHEV documentation for disaster recovery. I do believe your specific concern about replicating issues to the geo replica have been considered and

[ovirt-users] Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version

Has this bug come back engine.log flooded with "Field 'foo' can not be updated when status is 'Up'" https://lists.ovirt.org/archives/list/users@ovirt.org/thread/MKFQRCKHRT6NJUHF7URJTQG753MND6PJ/?sort=date Regards, Paul S. From: Florian Schmid Sent: 06 February

[ovirt-users] Can't install virtio-win with EL7.7/Ovirt-4.3.8 -- rpm error

Hi, I was trying to install the virtio-win package, but it gives an error: ERROR You need to update rpm to handle: rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by virtio-win-0.1.173-6.noarch Is this a known problem with current 4.3.x and EL7.7? -derek -- Derek Atkins

[ovirt-users] Re: Backup Solution

Hey Jamie, thanks for replying. I was wondering about gluster g-rep, but what if something that just happened to me (gluster f*ckup) will get replicated too. At this point (lost 3 HCI clusters due to Gluster) I am not really trusting this piece of software with my live data *and* my backups.

[ovirt-users] Re: Backup Solution

On February 6, 2020 6:06:18 PM GMT+02:00, Christian Reiss wrote: >Hey folks, > >Running a 3-way HCI (again (sigh)) on gluster. Now the _inside_ of the >vms is backup'ed seperatly using bareos on an hourly basis, so files >are >present with worst case 59 minutes data loss. > >Now, on the

[ovirt-users] Re: Backup Solution

You should look at the gluster georeplication option, I think it would be more appropriate for disaster recovery purposes. It is also possible to export VMs as OVA which can then be reimported back into oVirt. I actually just wrote an ansible playbook to do this very thing and intend to share my

[ovirt-users] Re: Emergency :/ No VMs starting

On February 6, 2020 6:04:58 PM GMT+02:00, Jayme wrote: >Appreciate the updates you've been posting. It's concerning to me as a >Gluster user as well. It would be nice to figure out what happened >here. > >On Thu, Feb 6, 2020 at 11:43 AM Christian Reiss > >wrote: > >> Hey, >> >> For prosperity:

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

On Thu, Feb 6, 2020 at 2:54 PM Jorick Astrego wrote: > > On 2/6/20 1:44 PM, Amit Bawer wrote: > > > > On Thu, Feb 6, 2020 at 1:07 PM Jorick Astrego wrote: > >> Here you go, this is from the activation I just did a couple of minutes >> ago. >> > I was hoping to see how it was first connected to

[ovirt-users] Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version

Hi, no, fortunately, the bug didn't came back. It looks like, that the engine needs its time to settle after changing the cluster compatibility version. After about 2 hours, the CPU load was as low as before. The time to load the VM UI takes a little bit more time, but I think this is also

[ovirt-users] Re: [Gluster-users] ACL issue v6.6, v6.7, v7.1, v7.2

Hi, this is interesting, this happen always with gluster 6.6 or only in certain cases? I ask this because I have two ovirt clusters with gluster, both with gluster v6.6, in one case I've upgraded from 6.5 to 6.6 as Strahil, and I haven't hit this bug. When upgrading my clusters I follow exactly