As I told you, you could just downgrade gluster on all nodes and later plan to
live migrate the VM disks.
I had to copy my data to the new volume, so I can avoid the ACL bug , when I
use newer versions of gluster.
Let's clarify some details:
1. Which version of oVirt and Gluster are you using
Hey David,
keep in mind that you need some big NICs.
I started my oVirt lab with 1 Gbit NIC and later added 4 dual-port 1 Gbit
NICs and I had to create multiple gluster volumes and multiple storage
domains.
Yet, windows VMs cannot use software raid for boot devices, thus it's a
> For migration between hosts you need a shared storage. SAN, Gluster, CEPH,
> NFS, iSCSI are among the ones already supported (CEPH is a little bit
> experimental).
Sounds like I'll be using NFS or Gluster after all.
Thank you.
> The engine is just a management layer. KVM/qemu has that option
I wonder if this openstack/nova defect is applicable to ovirt/vdsm since
it is also a client of that libvirt API?
https://opendev.org/openstack/nova/commit/a53c867913ff364c789aba1f7255dfcc68ff9f85
Regards,
Glenn Marcy
Sandro Bonazzola wrote on 06/22/2020 04:49:13 AM:
> From: Sandro Bonazzola
On 6/17/20 8:48 AM, Sandro Bonazzola wrote:
> Hi,
> if you have some time, here is a chance for helping oVirt project
> without requiring development skills.
> Help us localize oVirt to your natural language!
> oVirt Engine needs some work for:
> (see
>
Strahil,
I have downgraded the target. The copy from the problematic volume to the
target is going on now.
Once I have the data copied, I might downgrade the problematic volume's
Gluster to 6.5.
At that point I might reattach the original ovirt domain and see if it will
work again.
But the copy
On Mon, 2020-06-22 at 15:14 +0200, Artur Socha wrote:
> Anton,
> I managed to re-create the issue on my local environment.
> Previously I tested it against Keycloak 8.0.1 with users loaded from LDAP.
> Currently I have users/groups created via Keycloak management panel. I need to
> investigate it
You should ensure that in the storage domain tab, the old storage is not
visible.
I still wander why yoiu didn't try to downgrade first.
Best Regards,
Strahil Nikolov
На 22 юни 2020 г. 13:58:33 GMT+03:00, C Williams
написа:
>Strahil,
>
>The GLCL3 storage domain was detached prior to
On Mon, Jun 22, 2020 at 4:55 PM Gilboa Davara wrote:
>
> On Mon, Jun 22, 2020 at 9:12 AM Yedidyah Bar David wrote:
> >
> > I agree. Would you like to open a bug about this? It's not always easy
> > to know the root cause for the failure, nor to pass it through the
> > various components until it
Il giorno lun 22 giu 2020 alle ore 09:24 Markus Schaufler <
markus.schauf...@digit-all.at> ha scritto:
> Hi!
>
> I've got an existing Grafana installation and would like to integrate our
> ovirt/rhev infrastructure.
> How could I do that?
>
I would recommend to read
On Mon, Jun 22, 2020 at 9:12 AM Yedidyah Bar David wrote:
>
> I agree. Would you like to open a bug about this? It's not always easy
> to know the root cause for the failure, nor to pass it through the
> various components until it can reach the end-user.
Sure. Happy to.
Against which bugzilla
On Mon, Jun 22, 2020 at 8:58 AM Yedidyah Bar David wrote:
>
> On Sun, Jun 21, 2020 at 7:36 PM Gilboa Davara wrote:
> >
> > On Thu, Jun 18, 2020 at 2:54 PM Yedidyah Bar David wrote:
> > >
> > > On Thu, Jun 18, 2020 at 2:37 PM Gilboa Davara wrote:
> > > >
> > > > On Wed, Jun 17, 2020 at 12:35 PM
Anton,I managed to re-create the issue on my local environment. Previously I
tested it against Keycloak 8.0.1 with users loaded from LDAP. Currently I have
users/groups created via Keycloak management panel. I need to investigate it
further which of the two changes is the root cause (it works fine
Portuguese: 100% translated in three components.
On Wed, Jun 17, 2020 at 2:51 AM Sandro Bonazzola
wrote:
> Hi,
> if you have some time, here is a chance for helping oVirt project without
> requiring development skills.
> Help us localize oVirt to your natural language!
> oVirt Engine needs some
Hi Strahil,
Yeah I figured the same. Thank you.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Strahil Nikolov
Strahil,
The GLCL3 storage domain was detached prior to attempting to add the new
storage domain.
Should I also "Remove" it ?
Thank You For Your Help !
-- Forwarded message -
From: Strahil Nikolov
Date: Mon, Jun 22, 2020 at 12:50 AM
Subject: Re: [ovirt-users] Re: Fwd: Fwd:
It's the client's browser settings , but I think it's easier to either change
the certificate to something that will be trusted, or to just import it.
Best Regards,
Strahil Nikolov
На 22 юни 2020 г. 11:29:20 GMT+03:00, Anton Louw via Users
написа:
>Hi All,
>
>So I managed to get the
На 22 юни 2020 г. 11:06:16 GMT+03:00, David White via Users
написа:
>Thank you and Strahil for your responses.
>They were both very helpful.
>
>> I think a hosted engine installation VM wants 16GB RAM configured
>though I've built older versions with 8GB RAM.
>> For modern VMs CentOS8 x86_64
Hi Anton,Thanks for the specs. I have create BZ issue for tracking:
https://bugzilla.redhat.com/show_bug.cgi?id=1849569Feel free to add
comments/change it when needed.
Artur
On Fri, 2020-06-19 at 10:57 +, Anton Louw wrote:
>
>
>
> Hi Artur,
>
> Please see below:
>
>
June 17, 2020 8:11 AM, "Krutika Dhananjay" wrote:
> Yes, so the bug has been fixed upstream and the backports to release-7 and
> release-8 of gluster
> pending merge. The fix should be available in the next .x release of
> gluster-7 and 8. Until then
> like Nir suggested, please turn off
+Asaf Rachmani , +Evgeny Slutsky
can
you please investigate?
Il giorno lun 22 giu 2020 alle ore 08:07 Glenn Marcy ha
scritto:
> Hello, I am hoping for some insight from folks with more hosted engine
> install experience.
>
> When I try to install the hosted engine using the RC5 dist I get the
Thank you and Strahil for your responses.
They were both very helpful.
> I think a hosted engine installation VM wants 16GB RAM configured though I've
> built older versions with 8GB RAM.
> For modern VMs CentOS8 x86_64 recommends at least 2GB for a host. CentOS7 was
> OK with 1, CentOS6 maybe
Hi!
I've got an existing Grafana installation and would like to integrate our
ovirt/rhev infrastructure.
How could I do that?
Thanks for any advice,
Markus
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
On Mon, Jun 22, 2020 at 9:21 AM Ian Easter wrote:
>
> Hello folks,
>
> Hoping I can trace this down here but kind of "out of the box" error going on
> here.
>
> Steps:
> - Install oVirt Node OS
> - Manual steps using ovirt-hosted-engine-setup
>
> Might be a step I glanced over so I'm alright
On Sun, Jun 21, 2020 at 8:04 PM Gilboa Davara wrote:
>
> Hello,
>
> Following the previous email, I think I'm hitting an odd problem, not
> sure if it's my mistake or an actual bug.
> 1. Newly deployed 4.4 self-hosted engine on localhost NFS storage on a
> single node.
> 2. Installation failed
Hello, I am hoping for some insight from folks with more hosted engine install
experience.
When I try to install the hosted engine using the RC5 dist I get the following
error during the startup
of the HostedEngine VM:
XML error: The PCI controller with index='0' must be model='pci-root' for
On Sun, Jun 21, 2020 at 7:36 PM Gilboa Davara wrote:
>
> On Thu, Jun 18, 2020 at 2:54 PM Yedidyah Bar David wrote:
> >
> > On Thu, Jun 18, 2020 at 2:37 PM Gilboa Davara wrote:
> > >
> > > On Wed, Jun 17, 2020 at 12:35 PM Yedidyah Bar David
> > > wrote:
> > > > > However, when trying to
27 matches
Mail list logo