I have been using v7 for quite some time.
Best Regards,
Strahil Nikolov
На 11 август 2020 г. 15:26:51 GMT+03:00, olaf.buitel...@gmail.com написа:
>Dear oVirt users,
>
>any news on the gluster support side on oVirt 4.3. With 6.10 being
>possibly the latest release, it would be nice if there is
You can check /var/log/ovirt-hosted-engine-setup log for prepare vm
---
Thanks
Gobinda
From: hkexdong--- via Users
Sent: Tuesday, August 11, 2020 8:03:31 PM
To: users@ovirt.org
Subject: [ovirt-users] Hosted Engine Deployment stuck at 3. Prepare VM
oVirt Node
Hey Olaf,
you can add the CentOS Storage SIG repo and patch.
Best Regards,
Strahil Nikolov
На 11 август 2020 г. 21:27:23 GMT+03:00, Olaf Buitelaar
написа:
>Hi Strahil,
>
>Thanks for confirming v7 is working fine with oVirt 4.3, it being from
>you,
>gives quite some faith.
>If that's generally
Have you tried to install the applance rpm manually ?
Most problem you got repo issues .
Best Regards,
Strahil Nikolov
На 11 август 2020 г. 17:33:31 GMT+03:00, hkexdong--- via Users
написа:
>oVirt Node version is 4.4.1. This version can successful deploy before.
>But after I compile the RAID
Hi Strahil,
Thanks for confirming v7 is working fine with oVirt 4.3, it being from you,
gives quite some faith.
If that's generally the case it would be nice if the yum repo
ovirt-4.3-dependencies.repo
could be updated to the gluster - v7 in the official repository e.g.;
Hello,
is possible to upgrade from ovirt 4.3 to 4.4 ?
Thanks
--
Jose Ferradeira
http://www.logicworks.pt
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Thanks for putting in the effort!
I learned a lot of new things.
I also learned that I need to learn a few more now.
The table could use some alternating background or a grid: Too easy to get lost.
Environments change over time, e.g. you find you really should have split the
management,
While trying to diagnose an issue with a set of VMs that get stopped for I/O
problems at startup, I try to deal with the fact that their boot disks cause
this issue, no matter where I connect them. They might have been the first
disks I ever tried to sparsify and I was afraid that might have
I came across this in an environment where the proxy was very slow. The
downloaded image for the appliance gets deleted every so often (and perhaps
also via the cleanup script), so when it needs to be reloaded from the
internet, it can take its time, because its quite large (>1GB).
Another
Sounds like the gluster ACL bug.
Did you recently patchbyour gluster ?
Did you test functionality of oVirt after gluster upgrade?
Check the brick logs for errors mentioning 'acl' (you might need to increase
log level temporarily).
If you do brick log reporting issues related to acl - you can
Hi Strahil, no updates, especially since I am stuck on 4.3.11 and they tell us
it's final.
Glusterfs is 6.9-1.el7.
Apart from those three VMs and the inability to copy disks the whole farm runs
fine so far.
Where would I configure the verbosity of logging? Can't find an obvious config
option.
Gluster log level (both volume and brick) can be done by following
https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level
Can you test with a fresh (blank template) VM:
- create a test VM
- create snapshot
- delete snapshot
-
For the migration of the HCI to another set of NICs, it's possible.
WARNING: Ensure that all hosts can reach themselves on the new IPs. ssh is a
good test (unless it has been hardened).
There are 2 paths to take:
- Add the new ip as a peer and replace-brick to use the new ip/hostname/fqdn
Hey folks,
this, I hope, is a trivial question. But I really can't find the button
for it. If you take a snapshot of any vm - how do you revert to that
snapshot, discarding all changes after?
I see options to clone, delete, take snapshot, preview... but revert?
Really in the true sense of
Hi,
Can you please share ansible version and logs from
/var/log/ovirt-hosted-engine-setup.
If the ansible version < 2.9.11, please upgrade it and try again.
Regards,
Asaf
On Mon, Aug 10, 2020 at 10:17 AM wrote:
> Hello, everyone
> I am using these versions for my test :
> -
On Fri, Aug 7, 2020 at 1:37 PM Jiří Sléžka wrote:
>
> On 8/7/20 9:50 AM, Jiří Sléžka wrote:
> > On 8/5/20 2:07 PM, Jiří Sléžka wrote:
> >> On 8/3/20 11:12 AM, Jiří Sléžka wrote:
> >>> Hello,
> >>>
> >>> I have 4 host cluster managed with standalone engine in version 4.3 and
> >>> I would like to
Hello,
there is a new documentation
"Overview of Networking in oVirt"
available in
https://www.ovirt.org/documentation/networking-overview/
Please let me know if you have any questions, comments, suggestions, or any
kind of critics about this text.
If you want to improve, you could also create
Dear oVirt users,
any news on the gluster support side on oVirt 4.3. With 6.10 being possibly the
latest release, it would be nice if there is an known stable upgrade path to
either gluster 7 and possibly 8 for the oVirt 4.3 branch.
Thanks Olaf
___
oVirt Node version is 4.4.1. This version can successful deploy before.
But after I compile the RAID driver. It now stuck at Prepare VM.
The last message is "[ INFO ] TASK [ovirt.hosted_engine_setup : Install
ovirt-engine-appliance rpm]"
According to the instructions from RAID controller
19 matches
Mail list logo
