Then, just ensure that the glusterd.service is enabled on all hosts and leave
it as it is.
If it worries you, you will have to move one of the hosts in another cluster
(probably a new one) and slowly migrate the VMs from the old to the new
one.Yet, if you use only 3 hosts that can put your VMs
Hi,
Having a LOT of trouble upgrading oVirt to 4.4.10 while switching to
CentOS Stream, I posted a short guide in my blog.
https://www.vacuum-tube.eu/wp/?p=399
Look at entry:
[2022-07-19] oVirt 4.4.7 to 4.4.10 Upgrade + Switch to CentOS Stream
Thanks for everyone who helped me !
Replacing a dead brick in a 2+1 scenario (2 data + 1 arbiter brick) requires to
reduce the replica to 1 by removing the dead brick and the arbiter.Use the
force option as you are not using a distributed-replicated volume .
Best Regards,Strahil Nikolov
On Mon, Jul 18, 2022 at 11:36,
Hello,
Not sure about the feature part. I additionally tested this on oVirt
4.4.10.7-1.el8 and it works fine even if cluster compatibility there is set to
4.6.
Engine:
MaxNumOfVmSockets: 32 version: 4.2
MaxNumOfVmSockets: 32 version: 4.3
MaxNumOfVmSockets: 32 version: 4.4
MaxNumOfVmSockets: 32
Hi,
Problem solved with downgrade postgresql-jdbc
dnf --showduplicates list postgresql-jdbc
dnf install postgresql-jdbc-42.2.3-3.el8_2
> On 18 Jul 2022, at 09:28, Andrei Verovski wrote:
>
> Hi,
>
>
> Finally I managed to migrate 4.4.7 to fresh installation of 4.4.10.
> However, after
Hi,
Thanks, I solved this problem before by means of executing these commands:
su - postgres -s/bin/bash
psql -d ovirt_engine_history
CREATE ROLE ovirt_engine_history_grafana;
ALTER DEFAULT PRIVILEGES FOR ROLE ovirt_engine_history IN SCHEMA public GRANT
SELECT ON TABLES TO
On Tue, Jul 19, 2022 at 9:38 AM Andrei Verovski wrote:
>
> Hi,
>
>
> Thanks, I solved this problem before by means of executing these commands:
>
> su - postgres -s/bin/bash
> psql -d ovirt_engine_history
>
> CREATE ROLE ovirt_engine_history_grafana;
> ALTER DEFAULT PRIVILEGES FOR ROLE
> On 19 Jul 2022, at 09:51, Yedidyah Bar David wrote:
>
> On Tue, Jul 19, 2022 at 9:38 AM Andrei Verovski wrote:
>>
>> Hi,
>>
>>
>> Thanks, I solved this problem before by means of executing these commands:
>>
>> su - postgres -s/bin/bash
>> psql -d ovirt_engine_history
>>
>> CREATE ROLE
Hi Dax,
+ Ritesh
I believe that this issue has just been resolved and is awaiting to be
released.
https://github.com/oVirt/cockpit-ovirt/pull/28/files
Artur
On Sun, Jul 10, 2022 at 8:27 AM Dax Kelson wrote:
> On the final setup of using the cockpit ovirt wizard to install the hosted
>
On 7/16/22 07:53, Strahil Nikolov wrote:
Try first with a single host. Set it into maintenance and check if the
checkmark is available.
setting single host to maintenance didn't change state of the gluster
services checkbox in cluster settings.
If not, try to 'reinstall' (UI, Hosts,
Yes this has fixed and awaiting for release.
Dax meanwhile you can use the workaround for this issue
https://bugzilla.redhat.com/show_bug.cgi?id=2106419#c2
On Tue, Jul 19, 2022 at 2:59 PM Artur Socha wrote:
> Hi Dax,
>
> + Ritesh
>
> I believe that this issue has just been resolved and is
Hello,
I recently upgraded our cluster from 4.3 to 4.5 (4.5.1.3-1.el8), I raised the
cluster compatibility afterwards to 4.7 as well. I noticed that the CPU hot
plugging does not work above 16 CPU's if cluster compatibility is set to 4.6 or
4.7.
Error I get is:
Failed to hot set number of
Hi everyone,
I think what you found here is the bug. Partially it was fixed in the
mentioned BZs but later we realized it still exists under some
circumstances.
I have posted GitHub PR [1] addressing it and it has already been merged.
This fix is expected to be released as part of oVirt Engine
"David Sekne" writes:
> Hello,
>
> I recently upgraded our cluster from 4.3 to 4.5 (4.5.1.3-1.el8), I
> raised the cluster compatibility afterwards to 4.7 as well. I noticed
> that the CPU hot plugging does not work above 16 CPU's if cluster
> compatibility is set to 4.6 or 4.7.
>
> Error I get
Hi Team
May I know how do I extract qcow2 or raw disks out of ovirt OVA file please.
Basically I want to move some of the vms to Nutanix AHV or Vmware cluster, for
that I need either qcow2 or raw disks of each of the running vms.
___
Users mailing
On Tue, Jul 19, 2022 at 5:29 PM dhanaraj.ramesh--- via Users <
users@ovirt.org> wrote:
> Hi Team
>
> May I know how do I extract qcow2 or raw disks out of ovirt OVA file
> please. Basically I want to move some of the vms to Nutanix AHV or Vmware
> cluster, for that I need either qcow2 or raw
16 matches
Mail list logo