Re: [Users] Can I move local_cluster in all-in-one setup?

2013-01-11 Thread Gianluca Cecchi
On Thu, Jan 10, 2013 at 5:10 PM, René Koch (ovido) wrote:

 If not, please do a resync.


It seems it is not in sync, if I understand correctly the two arrows
symbol in:
https://docs.google.com/file/d/0BwoPbcrMv8mvUFFVaVl1TTlVVVE/edit

My network page is instead this
https://docs.google.com/file/d/0BwoPbcrMv8mveERiMUlKY094TVk/edit

The problem is that I'm not able to make it synced, tried both with and
without selecting the verify checkbox at the bottom
it seems a dog trying to bite its tail (at least we say this way in Italy
with similar situations... ;-)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] trouble with pci passthrough

2013-01-11 Thread Andreas Huser
Hi Shu, 

it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + 
libvirtd + virt-manager. 
Then i have no Problems. I can assign the pci device with virt-manager or virsh 
and the PCI Device works perfect. 

But when i install on top on this Centos Server oVirt. The pci passthrough 
works not more cleanly. 
I see the Device on the destination Server (Windows Server 2003) but the divice 
have an error message. device cannot be start (code 10)  
I tasting this installation  with Centos6.3, Oralce Linux 6.3, Fedora 17 and 
Fedora 18.

regards
Andreas 


- Ursprüngliche Mail - 

Von: Shu Ming shum...@linux.vnet.ibm.com 
An: ahuser ahu...@7five-edv.de 
CC: ih...@redhat.com, users@ovirt.org 
Gesendet: Donnerstag, 10. Januar 2013 02:35:37 
Betreff: Re: [Users] trouble with pci passthrough 


2013-1-10 8:42, ahuser: 



Hi Itamar, 


Thanks for your reply. 
I tried and ro this with virsh + xml file and virt-manager. 


I suppose you assigned the device to the virtual server successfully with virsh 
and virt-manager. 


blockquote



Confusing is that after the installation oVirt the device is not passed 
cleanly. 
/blockquote

Do you mean the old virtual server which was created before oVirt installation 
was finally managed by oVirt? Or oVirt didn't manage this virtual server but 
the PCI device assigned to the virtual server disappeared? 


blockquote








Von Samsung-Tablet gesendet 
Itamar Heim ih...@redhat.com hat geschrieben: 


___
Users mailing list Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 
/blockquote


-- 
---
舒明 Shu Ming
Open Virtualization Engineerning; CSTL, IBM Corp.
Tel: 86-10-82451626  Tieline: 9051626 E-mail: shum...@cn.ibm.com or 
shum...@linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software 
Park, Haidian District, Beijing 100193, PRC 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] trouble with pci passthrough

2013-01-11 Thread Itamar Heim

On 01/11/2013 10:46 AM, Andreas Huser wrote:

Hi Shu,

it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + 
libvirtd + virt-manager.
Then i have no Problems. I can assign the pci device with virt-manager or virsh 
and the PCI Device works perfect.

But when i install on top on this Centos Server oVirt. The pci passthrough 
works not more cleanly.
I see the Device on the destination Server (Windows Server 2003) but the divice have an 
error message. device cannot be start (code 10)
I tasting this installation  with Centos6.3, Oralce Linux 6.3, Fedora 17 and 
Fedora 18.


so you just installed oVirt engine and the guest which you are launching 
without ovirt stops using the pci, or are you actually launching the 
guest with ovirt?




regards
Andreas


- Ursprüngliche Mail -

Von: Shu Ming shum...@linux.vnet.ibm.com
An: ahuser ahu...@7five-edv.de
CC: ih...@redhat.com, users@ovirt.org
Gesendet: Donnerstag, 10. Januar 2013 02:35:37
Betreff: Re: [Users] trouble with pci passthrough


2013-1-10 8:42, ahuser:



Hi Itamar,


Thanks for your reply.
I tried and ro this with virsh + xml file and virt-manager.


I suppose you assigned the device to the virtual server successfully with virsh 
and virt-manager.


blockquote



Confusing is that after the installation oVirt the device is not passed cleanly.
/blockquote

Do you mean the old virtual server which was created before oVirt installation 
was finally managed by oVirt? Or oVirt didn't manage this virtual server but 
the PCI device assigned to the virtual server disappeared?


blockquote








Von Samsung-Tablet gesendet
Itamar Heim ih...@redhat.com hat geschrieben:


___
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
/blockquote





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] oVirt Node (HyperVisor) - Memory Usage

2013-01-11 Thread Doron Fediuck


-Original Message-
From: Alex Leonhardt [alex.t...@gmail.com]
Received: Friday, 11 Jan 2013, 11:28
To: oVirt Mailing List [users@ovirt.org]
Subject: [Users] oVirt Node (HyperVisor) - Memory Usage

Hi All,

I've just had a little check on a hyper-visor (based on Centos 6.3)

VDSM versions:

vdsm.x86_64   4.10.0-0.44.14.el6
vdsm-cli.noarch   4.10.0-0.44.14.el6
vdsm-python.x86_644.10.0-0.44.14.el6
vdsm-xmlrpc.noarch4.10.0-0.44.14.el6


BUT - my concern is more that a VMs virtual memory (VSZ) allocation is much
higher than that of its configuration ?

qemu 24233 11.0  1.0 *3030420* 1008484 ? Sl2012 2189:02
/usr/libexec/qemu-kvm -S -M rhel6.3.0 -cpu Conroe -enable-kvm *-m
2048*-smp 4,sockets=1,cores=4,threads=1 -name


Alex


-- 

| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |

Alex, 
What usage do you see and what did you configure?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] Cannot see FC LUNs in Direct LUN screen

2013-01-11 Thread Daniel Erez


- Original Message -
 From: Dave Olker dave.ol...@sbcglobal.net
 To: users@ovirt.org
 Sent: Friday, January 11, 2013 3:00:24 AM
 Subject: [Users] Cannot see FC LUNs in Direct LUN screen
 
 
 
 
 
 Hi folks,
 
 
 
 I’m very new to oVirt and Linux so I apologize if this is pilot
 error.
 
 
 
 I’m running Fedora 17 on my oVirt 3.1 Engine and my oVirt 3.1 Node. I
 have updated (via yum) to the latest patches on both systems. I have
 a 3.1 cluster created with a single node and I’ve created several
 VMs using boot disks located in FC storage domains. I’m now trying
 to use the new “Direct Lun” feature to present disks to my VM guests
 outside of a storage domain.
 
 
 
 I’ve verified that my oVirt Node can see the LUNs correctly and
 multipath shows they are active:
 
 
 
 [root@atcwin3 ~]# multipath -v2
 
 create: 360014380024d0ad0f0f8 undef HP,HSV300
 
 size=50G features='1 queue_if_no_path' hwhandler='0' wp=undef
 
 |-+- policy='round-robin 0' prio=25 status=undef
 
 | |- 0:0:15:2 sdz 65:144 undef ready running
 
 | `- 2:0:15:2 sdbr 68:80 undef ready running
 
 `-+- policy='round-robin 0' prio=5 status=undef
 
 |- 0:0:14:2 sde 8:64 undef ready running
 
 `- 2:0:14:2 sdaw 67:0 undef ready running
 
 create: 360014380024d0ad0f0fc undef HP,HSV300
 
 size=50G features='1 queue_if_no_path' hwhandler='0' wp=undef
 
 |-+- policy='round-robin 0' prio=25 status=undef
 
 | |- 0:0:14:3 sdf 8:80 undef ready running
 
 | `- 2:0:14:3 sdax 67:16 undef ready running
 
 `-+- policy='round-robin 0' prio=5 status=undef
 
 |- 0:0:15:3 sdaa 65:160 undef ready running
 
 `- 2:0:15:3 sdbs 68:96 undef ready running
 
 ...
 
 
 
 
 
 And these disks are visible in the “New Domain” screen if I want to
 add them to a new FC domain:
 
 
 
 
 
 
 
 
 
 But when I try to add any of these disks to a VM via Direct Lun I get
 an empty list:
 
 
 
 
 
 
 
 
 
 So the oVirt Node can see the disks just fine. oVirt Engine can see
 and use the disks in a storage domain but I’m not able to add them
 to a VM using Direct Lun mode.
 
 
 
 I’m not sure where to look next. Any suggestions would be greatly
 appreciated.
 
 
 
 Thanks,
 
 
 Dave
 

Hi Dave,

The problem you've encountered resembles an issue which is already resolved on 
latest version.
As a quick workaround, try selecting 'Fibre Channel' as 'Storage Type' before 
selecting a Data Center/Host.
For further inquiry, please send engine and VDSM logs.

Best Regards,
Daniel

 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] trouble with pci passthrough

2013-01-11 Thread Andreas Huser
I launch the vm with ovirt and attach (if started) the pci device with virsh 
attach-device w2k3-server parport. this procedure works fine befor ovirt 
installation.
sorry for my bad english :-)


- Ursprüngliche Mail -

Von: Itamar Heim ih...@redhat.com
An: Andreas Huser ahu...@7five-edv.de
CC: Shu Ming shum...@linux.vnet.ibm.com, users@ovirt.org
Gesendet: Freitag, 11. Januar 2013 11:36:04
Betreff: Re: [Users] trouble with pci passthrough

On 01/11/2013 10:46 AM, Andreas Huser wrote:
 Hi Shu,

 it's very simple, when i install a simple Server Centos 6.3 + qemu-kvm + 
 libvirtd + virt-manager.
 Then i have no Problems. I can assign the pci devicre with virt-manager or 
 virsh and the PCI Device works perfect.

 But when i install on top on this Centos Server oVirt. The pci passthrough 
 works not more cleanly.
 I see the Device on the destination Server (Windows Server 2003) but the 
 divice have an error message. device cannot be start (code 10)
 I tasting this installation with Centos6.3, Oralce Linux 6.3, Fedora 17 and 
 Fedora 18.

so you just installed oVirt engine and the guest which you are launching
without ovirt stops using the pci, or are you actually launching the
guest with ovirt?


 regards
 Andreas


 - Ursprüngliche Mail -

 Von: Shu Ming shum...@linux.vnet.ibm.com
 An: ahuser ahu...@7five-edv.de
 CC: ih...@redhat.com, users@ovirt.org
 Gesendet: Donnerstag, 10. Januar 2013 02:35:37
 Betreff: Re: [Users] trouble with pci passthrough


 2013-1-10 8:42, ahuser:



 Hi Itamar,


 Thanks for your reply.
 I tried and ro this with virsh + xml file and virt-manager.


 I suppose you assigned the device to the virtual server successfully with 
 virsh and virt-manager.






 Confusing is that after the installation oVirt the device is not passed 
 cleanly.


 Do you mean the old virtual server which was created before oVirt 
 installation was finally managed by oVirt? Or oVirt didn't manage this 
 virtual server but the PCI device assigned to the virtual server disappeared?


 blockquote








 Von Samsung-Tablet gesendet
 Itamar Heim ih...@redhat.com hat geschrieben:


 ___
 Users mailing list Users@ovirt.org 
 http://lists.ovirt.org/mailman/listinfo/users
 /blockquote





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] trouble with pci passthrough

2013-01-11 Thread Itamar Heim

On 01/11/2013 02:09 PM, Andreas Huser wrote:

I launch the vm with ovirt and attach (if started) the pci device with
virsh attach-device w2k3-server parport. this procedure  works fine
befor ovirt installation.


I think a better way to attach the pci device in ovirt would be via a 
custom vdsm hook and a custom property on the vm, then via virsh.
I'm assuming that in order to use virsh you had to use the password vdsm 
set to libvirt?



sorry for my bad english :-)



*Von: *Itamar Heim ih...@redhat.com
*An: *Andreas Huser ahu...@7five-edv.de
*CC: *Shu Ming shum...@linux.vnet.ibm.com, users@ovirt.org
*Gesendet: *Freitag, 11. Januar 2013 11:36:04
*Betreff: *Re: [Users] trouble with pci passthrough

On 01/11/2013 10:46 AM, Andreas Huser wrote:
  Hi Shu,
 
  it's very simple, when i install a simple Server Centos 6.3 +
qemu-kvm + libvirtd + virt-manager.
  Then i have no Problems. I can assign the pci devicre with
virt-manager or virsh and the PCI Device works perfect.
 
  But when i install on top on this Centos Server oVirt. The pci
passthrough works not more cleanly.
  I see the Device on the destination Server (Windows Server 2003) but
the divice have an error message. device cannot be start (code 10)
  I tasting this installation  with Centos6.3, Oralce Linux 6.3, Fedora
17 and Fedora 18.

so you just installed oVirt engine and the guest which you are launching
without ovirt stops using the pci, or are you actually launching the
guest with ovirt?

 
  regards
  Andreas
 
 
  - Ursprüngliche Mail -
 
  Von: Shu Ming shum...@linux.vnet.ibm.com
  An: ahuser ahu...@7five-edv.de
  CC: ih...@redhat.com, users@ovirt.org
  Gesendet: Donnerstag, 10. Januar 2013 02:35:37
  Betreff: Re: [Users] trouble with pci passthrough
 
 
  2013-1-10 8:42, ahuser:
 
 
 
  Hi Itamar,
 
 
  Thanks for your reply.
  I tried and ro this with virsh + xml file and virt-manager.
 
 
  I suppose you assigned the device to the virtual server successfully
with virsh and virt-manager.
 
 
  blockquote
 
 
 
  Confusing is that after the installation oVirt the device is not
passed cleanly.
  /blockquote
 
  Do you mean the old virtual server which was created before oVirt
installation was finally managed by oVirt? Or oVirt didn't manage this
virtual server but the PCI device assigned to the virtual server
disappeared?
 
 
  blockquote
 
 
 
 
 
 
 
 
  Von Samsung-Tablet gesendet
  Itamar Heim ih...@redhat.com hat geschrieben:
 
 
  ___
  Users mailing list Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
  /blockquote
 
 






___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[Users] API usage - 3.1

2013-01-11 Thread Tom Brown
Trying to get going adding VM's via the API and so far have managed to get 
quite far - I am however facing this

vm_template = vm
name%s/name
cluster
  nameDefault/name
/cluster
template
  nameBlank/name
/template
vm_typeserver/vm_type
memory536870912/memory
os
  boot dev=hd/
/os
/vm

The VM is created but the type ends up being a desktop and not a server - 

What did i do wrong?

thanks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] ovirt fails to attach gluster volume

2013-01-11 Thread Vijay Bellur

On 01/11/2013 12:56 PM, Jithin Raju wrote:

Traceback (most recent call last):
   File /usr/share/vdsm/storage/hsm.py, line 1929, in connectStorageServer
 conObj.connect()
   File /usr/share/vdsm/storage/storageServer.py, line 179, in connect
 self._mount.mount(self.options, self._vfsType)
   File /usr/share/vdsm/storage/mount.py, line 190, in mount
 return self._runcmd(cmd, timeout)
   File /usr/share/vdsm/storage/mount.py, line 206, in _runcmd
 raise MountError(rc, ;.join((out, err)))
MountError: (1, 'Mount failed. Please check the log file for more
details.\n;ERROR: failed to create logfile
/var/log/glusterfs/rhev-data-center-mnt-fig:_vol1.log (Permission
denied)\nERROR: failed to open logfile
/var/log/glusterfs/rhev-data-center-mnt-fig:_vol1.log\n')



Do you have selinux in enforcing mode on the host?

Thanks,
Vijay
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] What do you want to see in oVirt next?

2013-01-11 Thread Itamar Heim

On 01/03/2013 11:26 PM, Alexandru Vladulescu wrote:


I would like to add a request for the new upper coming version 3.2 if
possible:


Hi Alexandru,

just to note my question was for the post 3.2 version, as 3.2 is 
basically done.




Although some of you use spice instead of VNC, as I am an Ubuntu user on
my desktop and laptop, spice protocol is not working withing my OS; even
if I tried to build it from source, search unofficial deb packs or
convert if from rpm packages. I know spice is strongly supported on the
Fedora community, but I, myself on the server side work on RH Enterprise
and Centos, but as for desktop use, I have a very hard time make the
spice plugin for firefox to work.

Therefore for my solution I had setup a VNC reflector + some shell
automation to make it work between 2 different subnets (one inside and
one outside) -- this, somehow, adding to the initial scope.

This would have been much more easier to have a VNC proxy inside the
ovirt engine function, from where to make the necessary setups and
assignments of the console to each VM, or even though I might sound
funny to make a solution as vrde on Vbox, because works damn great and
it's easy to setup or change.

Last question, If I might ask, when is the 3.2 planned to be released
(aprox)


last update was here:
http://lists.ovirt.org/pipermail/users/2013-January/011454.html

Thanks,
   Itamar
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users