date:20130128

Re: [Users] 3.1 to 3.2 migration

2013-01-28 Thread Alex Lourie


On 01/29/2013 07:48 AM, saravanan s wrote:
im using redhat 6.2 linux version for the virtualization concept. But 
here im facing issues , listed below .

please give me a guidance

1)hypervisors(host) cant able to stop properly
2)vm'z multipath functions not functioning properly
3)Storage not getting shutdown , because heavy load?
4) while running vm's im getting threshold error message



Hi

It seems that you are having a problem(s) that are not related to this 
thread.


Would you mind posting it as a separate thread with it's own subject? It 
would be easier for everyone to understand the context.


Thanks.



On Tue, Jan 29, 2013 at 11:11 AM, Alex Lourie > wrote:


On 01/24/2013 04:51 PM, Alexandru Vladulescu wrote:

On 01/24/2013 04:42 PM, Adrian Gibanel wrote:




*De: *"Alexandru Vladulescu" 

*Para: *users@ovirt.org 
*Enviados: *Jueves, 24 de Enero 2013 14:21:22
*Asunto: *Re: [Users] 3.1 to 3.2 migration

Hi,

On 01/24/2013 03:13 PM, Adrian Gibanel wrote:

As far as I know in Fedora you need to upgrade from
Fedora 17 to Fedora 18.
As you you're using CentOS I suppose you don't need to
upgrade your CentOS but I'm not sure at all.

This is not the case, it goes right if installed 3.2 from
scratch on a new machine. Don't think CentOS has a problem here.

Well, I remember having asked about Fedora and CentOS oVirt
support differences in the irc and I think I was answered that
for some features you needed extra repositories for new kernel +
kvm and / or gluster and /or libvirt. Not sure about what were
exactly the features you missed and the repos you need to enable
manually.

But just for upgrading to oVirt 3.2 I think you won't have any
problem.

Anyways what I've read in the mailing list about 3.1 to
3.2 update is the following one:

  * Update packages
  * Run: engine-upgrade command

I don't know how easy it is to update packages in your
case (stable to beta) so you might do it in your way
like this:
  * Remove 3.1 packages
  * Install 3.2 beta packages
  * Run: engine-upgrade command

I have removed 3.1 using yum, installed 3.2 using yum and
run the engine-setup and not upgrade command. As seen
engine-upgrade, tries first to locate a mirror through yum.

Hummm. Maybe I was mistaken and what you have to do is to add a
yum repository and then run engine-upgrade. What I remember
without any doubt is that you had to run engine-upgrade no
matter what.

Hope someone can clarify it.

I will check that and get back to you.



Hi Alex

When you test the upgrade, please attach its log file. We then can
look into the upgrade process and find issues if there are any.

Thanks.



-- 
*Adrián Gibanel*

I.T. Manager

+34 675 683 301
www.btactic.com 


*
Ens podeu seguir a/Nos podeis seguir en:


i *

Abans d´imprimir aquest missatge, pensa en el medi ambient. El
medi ambient és cosa de tothom. / Antes de imprimir el mensaje
piensa en el medio ambiente. El medio ambiente es cosa de todos.

AVIS:
El contingut d'aquest missatge i els seus annexos és
confidencial. Si no en sou el destinatari, us fem saber que està
prohibit utilitzar-lo, divulgar-lo i/o copiar-lo sense tenir
l'autorització corresponent. Si heu rebut aquest missatge per
error, us agrairem que ho feu saber immediatament al remitent i
que procediu a destruir el missatge.

AVISO:
El contenido de este mensaje y de sus anexos es confidencial. Si
no es el destinatario, les hacemos saber que está prohibido
utilizarlo, divulgarlo y/o copiarlo sin tener la autorización
correspondiente. Si han recibido este mensaje por error, les
agradeceríamos que lo hagan saber inmediatamente al remitente y
que procedan a destruir el mensaje.



___
Users mailing list
Users@ovirt.org  
http://lists.ovirt.org/mailman/listinfo/users





___
Users mailing list
Users@ovirt.org  
http://lists.ovirt.org/mailman/listinfo/users


-- 
Alex Lourie

Red Hat


___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users




--
Thanks&Regards
S.Saravanan
99528023

Re: [Users] 3.1 to 3.2 migration

2013-01-28 Thread saravanan s

im using redhat 6.2 linux version for the virtualization concept. But here
im facing issues , listed below .
please give me a guidance

1)hypervisors(host) cant able to stop properly
2)vm'z multipath functions not functioning properly
3)Storage not getting shutdown , because heavy load?
4) while running vm's im getting threshold error message


On Tue, Jan 29, 2013 at 11:11 AM, Alex Lourie  wrote:

>  On 01/24/2013 04:51 PM, Alexandru Vladulescu wrote:
>
> On 01/24/2013 04:42 PM, Adrian Gibanel wrote:
>
>
> --
>
> *De: *"Alexandru Vladulescu" 
> 
> *Para: *users@ovirt.org
> *Enviados: *Jueves, 24 de Enero 2013 14:21:22
> *Asunto: *Re: [Users] 3.1 to 3.2 migration
>
>  Hi,
>
> On 01/24/2013 03:13 PM, Adrian Gibanel wrote:
>
> As far as I know in Fedora you need to upgrade from Fedora 17 to Fedora 18.
> As you you're using CentOS I suppose you don't need to upgrade your CentOS
> but I'm not sure at all.
>
>  This is not the case, it goes right if installed 3.2 from scratch on a
> new machine. Don't think CentOS has a problem here.
>
> Well, I remember having asked about Fedora and CentOS oVirt support
> differences in the irc and I think I was answered that for some features
> you needed extra repositories for new kernel + kvm and / or gluster and /or
> libvirt. Not sure about what were exactly the features you missed and the
> repos you need to enable manually.
>
> But just for upgrading to oVirt 3.2 I think you won't have any problem.
>
>  Anyways what I've read in the mailing list about 3.1 to 3.2 update is
> the following one:
>
>   * Update packages
>   * Run: engine-upgrade command
>
> I don't know how easy it is to update packages in your case (stable to
> beta) so you might do it in your way like this:
>   * Remove 3.1 packages
>   * Install 3.2 beta packages
>   * Run: engine-upgrade command
>
>  I have removed 3.1 using yum, installed 3.2 using yum and run the
> engine-setup and not upgrade command. As seen engine-upgrade, tries first
> to locate a mirror through yum.
>
> Hummm. Maybe I was mistaken and what you have to do is to add a yum
> repository and then run engine-upgrade. What I remember without any doubt
> is that you had to run engine-upgrade no matter what.
>
> Hope someone can clarify it.
>
> I will check that and get back to you.
>
>
> Hi Alex
>
> When you test the upgrade, please attach its log file. We then can look
> into the upgrade process and find issues if there are any.
>
> Thanks.
>
>
> --
>  *Adrián Gibanel*
> I.T. Manager
>
> +34 675 683 301
> www.btactic.com 
>
>
> *
> Ens podeu seguir a/Nos podeis seguir en:
>
>  i
> *
>
>  Abans d´imprimir aquest missatge, pensa en el medi ambient. El medi
> ambient és cosa de tothom. / Antes de imprimir el mensaje piensa en el
> medio ambiente. El medio ambiente es cosa de todos.
>
> AVIS:
> El contingut d'aquest missatge i els seus annexos és confidencial. Si no
> en sou el destinatari, us fem saber que està prohibit utilitzar-lo,
> divulgar-lo i/o copiar-lo sense tenir l'autorització corresponent. Si heu
> rebut aquest missatge per error, us agrairem que ho feu saber immediatament al
> remitent i que procediu a destruir el missatge.
>
> AVISO:
> El contenido de este mensaje y de sus anexos es confidencial. Si no es el
> destinatario, les hacemos saber que está prohibido utilizarlo, divulgarlo
> y/o copiarlo sin tener la autorización correspondiente. Si han recibido
> este mensaje por error, les agradeceríamos que lo hagan saber
> inmediatamente al remitente y que procedan a destruir el mensaje.
>
>
>
> ___
> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
>
> ___
> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>
>
> --
> Alex Lourie
> Red Hat
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 
Thanks&Regards
S.Saravanan
9952802365
27480500-22185
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] 3.1 to 3.2 migration

2013-01-28 Thread Alex Lourie


On 01/24/2013 04:51 PM, Alexandru Vladulescu wrote:

On 01/24/2013 04:42 PM, Adrian Gibanel wrote:




*De: *"Alexandru Vladulescu" 
*Para: *users@ovirt.org
*Enviados: *Jueves, 24 de Enero 2013 14:21:22
*Asunto: *Re: [Users] 3.1 to 3.2 migration

Hi,

On 01/24/2013 03:13 PM, Adrian Gibanel wrote:

As far as I know in Fedora you need to upgrade from Fedora 17
to Fedora 18.
As you you're using CentOS I suppose you don't need to
upgrade your CentOS but I'm not sure at all.

This is not the case, it goes right if installed 3.2 from scratch
on a new machine. Don't think CentOS has a problem here.

Well, I remember having asked about Fedora and CentOS oVirt support 
differences in the irc and I think I was answered that for some 
features you needed extra repositories for new kernel + kvm and / or 
gluster and /or libvirt. Not sure about what were exactly the 
features you missed and the repos you need to enable manually.


But just for upgrading to oVirt 3.2 I think you won't have any problem.

Anyways what I've read in the mailing list about 3.1 to 3.2
update is the following one:

  * Update packages
  * Run: engine-upgrade command

I don't know how easy it is to update packages in your case
(stable to beta) so you might do it in your way like this:
  * Remove 3.1 packages
  * Install 3.2 beta packages
  * Run: engine-upgrade command

I have removed 3.1 using yum, installed 3.2 using yum and run the
engine-setup and not upgrade command. As seen engine-upgrade,
tries first to locate a mirror through yum.

Hummm. Maybe I was mistaken and what you have to do is to add a yum 
repository and then run engine-upgrade. What I remember without any 
doubt is that you had to run engine-upgrade no matter what.


Hope someone can clarify it.

I will check that and get back to you.



Hi Alex

When you test the upgrade, please attach its log file. We then can look 
into the upgrade process and find issues if there are any.


Thanks.



--
*Adrián Gibanel*
I.T. Manager

+34 675 683 301
www.btactic.com 


*
Ens podeu seguir a/Nos podeis seguir en:

 
i *


Abans d´imprimir aquest missatge, pensa en el medi ambient. El medi 
ambient és cosa de tothom. / Antes de imprimir el mensaje piensa en 
el medio ambiente. El medio ambiente es cosa de todos.


AVIS:
El contingut d'aquest missatge i els seus annexos és confidencial. Si 
no en sou el destinatari, us fem saber que està prohibit 
utilitzar-lo, divulgar-lo i/o copiar-lo sense tenir l'autorització 
corresponent. Si heu rebut aquest missatge per error, us agrairem que 
ho feu saber immediatament al remitent i que procediu a destruir el 
missatge.


AVISO:
El contenido de este mensaje y de sus anexos es confidencial. Si no 
es el destinatario, les hacemos saber que está prohibido utilizarlo, 
divulgarlo y/o copiarlo sin tener la autorización correspondiente. Si 
han recibido este mensaje por error, les agradeceríamos que lo hagan 
saber inmediatamente al remitente y que procedan a destruir el mensaje.




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


--
Alex Lourie
Red Hat

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Cannot create vm's from user portal

2013-01-28 Thread Dead Horse

Going to venture a guess that this -->
http://gerrit.ovirt.org/#/c/11411/is the fix for this ;)
- DHC


On Mon, Jan 28, 2013 at 3:40 PM, Dead Horse
wrote:

> Seeing this error in engine log when attempting to create a new VM from
> the userportal:
> 2013-01-28 15:35:47,158 ERROR
> [org.ovirt.engine.core.bll.GetClustersWithPermittedActionQuery]
> (ajp--127.0.0.1-8702-5) Query GetClustersWithPermittedActionQuery failed.
> Exception message is PreparedStatementCallback; bad SQL grammar [select *
> from  fn_perms_get_vds_groups_with_permitted_action(?, ?)]; nested
> exception is org.postgresql.util.PSQLException: ERROR: missing FROM-clause
> entry for table "vds_groups"
>   Where: PL/pgSQL function "fn_perms_get_vds_groups_with_permitted_action"
> line 3 at RETURN QUERY
> 2013-01-28 15:36:16,726 ERROR
> [org.ovirt.engine.core.bll.GetClustersWithPermittedActionQuery]
> (ajp--127.0.0.1-8702-7) Query GetClustersWithPermittedActionQuery failed.
> Exception message is PreparedStatementCallback; bad SQL grammar [select *
> from  fn_perms_get_vds_groups_with_permitted_action(?, ?)]; nested
> exception is org.postgresql.util.PSQLException: ERROR: missing FROM-clause
> entry for table "vds_groups"
>   Where: PL/pgSQL function "fn_perms_get_vds_groups_with_permitted_action"
> line 3 at RETURN QUERY
>
> Current running engine build --> commit:
> 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
>
> - DHC
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.2 Test Day

2013-01-28 Thread Shu Ming

A quick questions: Doesn't oVirt 3.2 support FC17? I can only find the
directory for FC18&FC19 in the oVirt release repositories.

Mike Burns:
> The test day for oVirt 3.2 will be held on Thursday January 31. For
> information of the Test Day, please follow:
>
> http://www.ovirt.org/Testing/OvirtTestDay
>
> Thanks
>
> Mike
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>


-- 
---
舒明 Shu Ming
Open Virtualization Engineerning; CSTL, IBM Corp.
Tel: 86-10-82451626  Tieline: 9051626 E-mail: shum...@cn.ibm.com or 
shum...@linux.vnet.ibm.com
Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, 
Beijing 100193, PRC


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] oVirt 3.2 Test Day

2013-01-28 Thread Mike Burns

The test day for oVirt 3.2 will be held on Thursday January 31.  For 
information of the Test Day, please follow:


http://www.ovirt.org/Testing/OvirtTestDay

Thanks

Mike
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.2 Release delayed

2013-01-28 Thread Mike Burns


On 01/28/2013 10:02 AM, Gianluca Cecchi wrote:

On Sat, Jan 26, 2013 at 10:51 AM, Gianluca Cecchi  wrote:

On Wed, Jan 23, 2013 at 10:29 PM, Mike Burns wrote:

The oVirt 3.2 Release has been delayed due to delays getting a stable
oVirt Node available.

New Dates

   * General availability: 2013-02-06
   * Beta release: 2013-01-24
   * Test Day: 2013-01-29


Thanks

Mike


Not to stress it, but any update on beta general availability?
Did it got the 24th? I didn't see the announcement yet, at least on
announce archives (I'm not subscribed to that list)...

Thanks for any update
Gianluca


Hello,
I was interested on providing feedack for the test day, but I presume
that no official announcement for beta implies no test day for
tomorrow, correct?
Let me know, please, if I have to allocate some of my time for that activity.

Gianluca



Sorry for the delay in my response. I was travelling last week and am 
just catching up now.


We'll be delaying the Test Day to Thursday this week.  An official 
announcement will be coming soon for both the Test Day and the Beta.


Thanks

Mike
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.2 Release delayed

2013-01-28 Thread Moran Goldboim


On 01/28/2013 08:21 PM, Joop wrote:

Gianluca Cecchi  wrote:



Hello,
I was interested on providing feedack for the test day, but I presume
that no official announcement for beta implies no test day for
tomorrow, correct?
Let me know, please, if I have to allocate some of my time for that
activity.


I was wondering the same, are there any directions for helping out on test day?

Joop




we are planing to delay test day for a couple of days to have all infra 
ready for it.

I'll send all details in a separate mail.

Moran.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] host power managment failures

2013-01-28 Thread Dead Horse

I put the host into maintenance mode, removed it and re-added the node. (No
reload, re-config, or reboot on the node side) At that point
configuration/test of the power management settings worked.
 - DHC
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Cannot create vm's from user portal

2013-01-28 Thread Dead Horse

Seeing this error in engine log when attempting to create a new VM from the
userportal:
2013-01-28 15:35:47,158 ERROR
[org.ovirt.engine.core.bll.GetClustersWithPermittedActionQuery]
(ajp--127.0.0.1-8702-5) Query GetClustersWithPermittedActionQuery failed.
Exception message is PreparedStatementCallback; bad SQL grammar [select *
from  fn_perms_get_vds_groups_with_permitted_action(?, ?)]; nested
exception is org.postgresql.util.PSQLException: ERROR: missing FROM-clause
entry for table "vds_groups"
  Where: PL/pgSQL function "fn_perms_get_vds_groups_with_permitted_action"
line 3 at RETURN QUERY
2013-01-28 15:36:16,726 ERROR
[org.ovirt.engine.core.bll.GetClustersWithPermittedActionQuery]
(ajp--127.0.0.1-8702-7) Query GetClustersWithPermittedActionQuery failed.
Exception message is PreparedStatementCallback; bad SQL grammar [select *
from  fn_perms_get_vds_groups_with_permitted_action(?, ?)]; nested
exception is org.postgresql.util.PSQLException: ERROR: missing FROM-clause
entry for table "vds_groups"
  Where: PL/pgSQL function "fn_perms_get_vds_groups_with_permitted_action"
line 3 at RETURN QUERY

Current running engine build --> commit:
61c11aecc40e755d08b6c34c6fe1c0a07fa94de8

- DHC
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Alon Bar-Lev



- Original Message -
> From: "Eli Mesika" 
> To: "Dead Horse" 
> Cc: "users" , "Alon Bar-Lev" 
> Sent: Monday, January 28, 2013 11:16:16 PM
> Subject: Re: [Users] engine Failed to decrypt Data error
> 
> 
> 
> - Original Message -
> > From: "Dead Horse" 
> > To: "Alon Bar-Lev" 
> > Cc: "users" , "Eli Mesika" 
> > Sent: Monday, January 28, 2013 11:04:53 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> > 
> > 
> > psql -U engine -d engine -c "select * from vdc_options where
> > option_name in ('LocalAdminPassword', 'AdminPassword');"
> > option_id | option_name |
> > 
> > option_value
> > 
> > | version
> > ---++---
> > 
> > 
> > 
> > ---+-
> > 127 | LocalAdminPassword |
> > KiG8670o1qXVX6omYsiCdaaXtQc/mGmr0qgLHqc8yykoRz
> > OwbfZzU9AxBYwYrJEwyqdq8c2ZwfGVvQ1YVIfGRspKLKogl59gBnwcQuk3al1K4Vtmr2hgWDtm5FBYd5
> > Nac4WIly4efjMCRjwrpPVkpAX55N8tGJ9LNzX8eRszQ4iVs8zivl0eu9SVhrB8tbHkA/+U5/vss26za8
> > X+AV67dtDzoD7ZS0eOT1Vx9vrOGHvDYU8tANEb29Et79CJ0whLOOEeuwTpkK1yZdF3PaWRbnTwXZUsB1
> > hMs9NLdo2ZxZOVSIK1E2mPh1WLybgIX1YB0Ra3BZvjAR9wPZz+jdfZng== |
> > general
> > 7 | AdminPassword | AakmoHu69RmCWkSoVXLOv0cwzwGscXaM+HJAONRtSdECEA
> > VL+bjc1Lis6PHR1vBwdmhITxAvo2998pTJNusvtuTCODra40MTC+9p9+Oev4jWIbkncHH8gRdIKyvHuz
> > O6fNda50VXeWYhGNFIMavw15PlslutUWEpyNAasjEWyZ7cNyjKK2eFKNDZ3F5PCv9RcQXfXkKSveWm6M
> > 40zUVOx1ZjCnptNUpB4VYf5vW8LOpSL5NJpfJQmu36QbBRDDo3+3XPb4ELXA4t1rbPYw9Z7hRbk5Mbtq
> > qvOA7q4+G4nPtxHB7d6dYT2QJ58wgXUSIIoz/odvz5yVYeazIFS3Faww== |
> > general
> > (2 rows)
> 
> Too long , supported values for encryption should be < 127 characters

Why too long? it should be 2048 RSA key.
And it is exactly 256 decoded.

> 
> 
> > 
> > 
> > 
> > 
> > On Mon, Jan 28, 2013 at 2:38 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> > 
> > 
> > 
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > emes...@redhat.com
> > > >
> > 
> > > Sent: Monday, January 28, 2013 10:35:34 PM
> > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > 
> > > 
> > > 
> > 
> > > was in the middle of a fresh engine setup which did not exhibit
> > > the
> > > symptom. However after running: "engine-config -s
> > > AdminPassword=interactive" and restarting the engine service on
> > > the
> > > clean setup the error message now shows up.
> > > 
> > > - DHC
> > > 
> > > 
> > > 
> > 
> > OK, at least it is related to the admin password.
> > 
> > Please send me the output of:
> > 
> > psql -U engine -d engine -c "select * from vdc_options where
> > option_name in ('LocalAdminPassword', 'AdminPassword');"
> > 
> > 
> > Thanks!
> > 
> > > 
> > > On Mon, Jan 28, 2013 at 1:55 PM, Alon Bar-Lev < alo...@redhat.com
> > > >
> > > wrote:
> > > 
> > > 
> > > 
> > > 
> > > 
> > > - Original Message -
> > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > > emes...@redhat.com
> > > > > 
> > > 
> > > > Sent: Monday, January 28, 2013 9:46:53 PM
> > > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > > 
> > > > 
> > > > 
> > > > 
> > > 
> > > > Current running engine build --> commit:
> > > > 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> > > > 
> > > > ran engine upgrade against the built rpms from that commit.
> > > > 
> > > > 
> > > > Thus I applied it as an upgrade against prior running build -->
> > > > commit:
> > > > 1eb895355239bbcb7a7ceda172405f0b68f18f35
> > > 
> > > [Please use plain text mails in lists.]
> > > 
> > > 
> > > Can you please patch EncryptionUtils.decrypt() with the
> > > following,
> > > so
> > > I can see what source is? source is encrypted blob, should not be
> > > a
> > > problem to send it.
> > > 
> > > if (!StringHelper.isNullOrEmpty(source.trim())) {
> > > KeyStore store = EncryptionUtils.getKeyStore(keyFile, passwd,
> > > certType);
> > > Key key = store.getKey(alias, passwd.toCharArray());
> > > + log.info ("DEBUG001 " + source);
> > 
> > 
> > > result = decrypt(source, key);
> > > 
> > > 
> > > }
> > > 
> > > 
> > > > 
> > > > 
> > > > 
> > > > On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev <
> > > > alo...@redhat.com
> > > > >
> > > > wrote:
> > > > 
> > > > 
> > > > How do you installed the engine? you built?
> > > > Which exact version?
> > > > 
> > > > 
> > > > - Original Message -
> > > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > > 
> > > > 
> > > > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > > > Cc: "users" < us

Re: [Users] host power managment failures

2013-01-28 Thread Eli Mesika



- Original Message -
> From: "Dead Horse" 
> To: "" 
> Sent: Monday, January 28, 2013 10:19:54 PM
> Subject: Re: [Users] host power managment failures
> 
> 
> 
> 
> Removing and re-adding the host then configuring power management
> resolves this.
> - DHC
> 
> 
> 
> 
> On Mon, Jan 28, 2013 at 1:25 PM, Dead Horse <
> deadhorseconsult...@gmail.com > wrote:
> 
> 
> 
> 
> Current running engine build --> commit:
> 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> 
> Host power management is having some issues:
> 
> 2013-01-28 13:15:49,320 ERROR
> [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-11)
> Illegal value in PM Proxy Preferences string , skipped.

Can you elaborate how did you got this? I suspect that maybe we have a bug here

> 2013-01-28 13:15:49,321 ERROR
> [org.ovirt.engine.core.bll.FenceExecutor] (ajp--127.0.0.1-8702-11)
> Failed to run Power Management command on Host , no running proxy
> Host was found.
> 
> - DHC
> 
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Eli Mesika



- Original Message -
> From: "Dead Horse" 
> To: "Alon Bar-Lev" 
> Cc: "users" , "Eli Mesika" 
> Sent: Monday, January 28, 2013 11:04:53 PM
> Subject: Re: [Users] engine Failed to decrypt Data error
> 
> 
> psql -U engine -d engine -c "select * from vdc_options where
> option_name in ('LocalAdminPassword', 'AdminPassword');"
> option_id | option_name |
> 
> option_value
> 
> | version
> ---++---
> 
> 
> 
> ---+-
> 127 | LocalAdminPassword |
> KiG8670o1qXVX6omYsiCdaaXtQc/mGmr0qgLHqc8yykoRz
> OwbfZzU9AxBYwYrJEwyqdq8c2ZwfGVvQ1YVIfGRspKLKogl59gBnwcQuk3al1K4Vtmr2hgWDtm5FBYd5
> Nac4WIly4efjMCRjwrpPVkpAX55N8tGJ9LNzX8eRszQ4iVs8zivl0eu9SVhrB8tbHkA/+U5/vss26za8
> X+AV67dtDzoD7ZS0eOT1Vx9vrOGHvDYU8tANEb29Et79CJ0whLOOEeuwTpkK1yZdF3PaWRbnTwXZUsB1
> hMs9NLdo2ZxZOVSIK1E2mPh1WLybgIX1YB0Ra3BZvjAR9wPZz+jdfZng== | general
> 7 | AdminPassword | AakmoHu69RmCWkSoVXLOv0cwzwGscXaM+HJAONRtSdECEA
> VL+bjc1Lis6PHR1vBwdmhITxAvo2998pTJNusvtuTCODra40MTC+9p9+Oev4jWIbkncHH8gRdIKyvHuz
> O6fNda50VXeWYhGNFIMavw15PlslutUWEpyNAasjEWyZ7cNyjKK2eFKNDZ3F5PCv9RcQXfXkKSveWm6M
> 40zUVOx1ZjCnptNUpB4VYf5vW8LOpSL5NJpfJQmu36QbBRDDo3+3XPb4ELXA4t1rbPYw9Z7hRbk5Mbtq
> qvOA7q4+G4nPtxHB7d6dYT2QJ58wgXUSIIoz/odvz5yVYeazIFS3Faww== | general
> (2 rows)

Too long , supported values for encryption should be < 127 characters 


> 
> 
> 
> 
> On Mon, Jan 28, 2013 at 2:38 PM, Alon Bar-Lev < alo...@redhat.com >
> wrote:
> 
> 
> 
> - Original Message -
> > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > To: "Alon Bar-Lev" < alo...@redhat.com >
> > Cc: "users" < users@ovirt.org >, "Eli Mesika" < emes...@redhat.com
> > >
> 
> > Sent: Monday, January 28, 2013 10:35:34 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> > 
> > 
> > 
> 
> > was in the middle of a fresh engine setup which did not exhibit the
> > symptom. However after running: "engine-config -s
> > AdminPassword=interactive" and restarting the engine service on the
> > clean setup the error message now shows up.
> > 
> > - DHC
> > 
> > 
> > 
> 
> OK, at least it is related to the admin password.
> 
> Please send me the output of:
> 
> psql -U engine -d engine -c "select * from vdc_options where
> option_name in ('LocalAdminPassword', 'AdminPassword');"
> 
> 
> Thanks!
> 
> > 
> > On Mon, Jan 28, 2013 at 1:55 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> > 
> > 
> > 
> > 
> > 
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > emes...@redhat.com
> > > > 
> > 
> > > Sent: Monday, January 28, 2013 9:46:53 PM
> > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > 
> > > 
> > > 
> > > 
> > 
> > > Current running engine build --> commit:
> > > 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> > > 
> > > ran engine upgrade against the built rpms from that commit.
> > > 
> > > 
> > > Thus I applied it as an upgrade against prior running build -->
> > > commit:
> > > 1eb895355239bbcb7a7ceda172405f0b68f18f35
> > 
> > [Please use plain text mails in lists.]
> > 
> > 
> > Can you please patch EncryptionUtils.decrypt() with the following,
> > so
> > I can see what source is? source is encrypted blob, should not be a
> > problem to send it.
> > 
> > if (!StringHelper.isNullOrEmpty(source.trim())) {
> > KeyStore store = EncryptionUtils.getKeyStore(keyFile, passwd,
> > certType);
> > Key key = store.getKey(alias, passwd.toCharArray());
> > + log.info ("DEBUG001 " + source);
> 
> 
> > result = decrypt(source, key);
> > 
> > 
> > }
> > 
> > 
> > > 
> > > 
> > > 
> > > On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev < alo...@redhat.com
> > > >
> > > wrote:
> > > 
> > > 
> > > How do you installed the engine? you built?
> > > Which exact version?
> > > 
> > > 
> > > - Original Message -
> > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > 
> > > 
> > > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > > emes...@redhat.com
> > > > > 
> > > > Sent: Monday, January 28, 2013 9:26:44 PM
> > > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > > 
> > > > 
> > > > Password length is 11 characters and consists of Upper, Lower
> > > > case
> > > > and one special character.
> > > > 
> > > > 
> > > > 
> > > > 
> > > > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev <
> > > > alo...@redhat.com
> > > > > 
> > > > wrote:
> > > > 
> > > > 
> > > > We tried to reproduce this.
> > > > What password do you use? is there one with some great length?
> > > > If not, Eli, we should send a debug pat

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Dead Horse

 psql -U engine -d engine -c "select * from vdc_options where option_name
in ('LocalAdminPassword', 'AdminPassword');"
 option_id |option_name
|



option_value


   | version
---++---



---+-
   127 | LocalAdminPassword |
KiG8670o1qXVX6omYsiCdaaXtQc/mGmr0qgLHqc8yykoRz
OwbfZzU9AxBYwYrJEwyqdq8c2ZwfGVvQ1YVIfGRspKLKogl59gBnwcQuk3al1K4Vtmr2hgWDtm5FBYd5
Nac4WIly4efjMCRjwrpPVkpAX55N8tGJ9LNzX8eRszQ4iVs8zivl0eu9SVhrB8tbHkA/+U5/vss26za8
X+AV67dtDzoD7ZS0eOT1Vx9vrOGHvDYU8tANEb29Et79CJ0whLOOEeuwTpkK1yZdF3PaWRbnTwXZUsB1
hMs9NLdo2ZxZOVSIK1E2mPh1WLybgIX1YB0Ra3BZvjAR9wPZz+jdfZng== | general
 7 | AdminPassword  |
AakmoHu69RmCWkSoVXLOv0cwzwGscXaM+HJAONRtSdECEA
VL+bjc1Lis6PHR1vBwdmhITxAvo2998pTJNusvtuTCODra40MTC+9p9+Oev4jWIbkncHH8gRdIKyvHuz
O6fNda50VXeWYhGNFIMavw15PlslutUWEpyNAasjEWyZ7cNyjKK2eFKNDZ3F5PCv9RcQXfXkKSveWm6M
40zUVOx1ZjCnptNUpB4VYf5vW8LOpSL5NJpfJQmu36QbBRDDo3+3XPb4ELXA4t1rbPYw9Z7hRbk5Mbtq
qvOA7q4+G4nPtxHB7d6dYT2QJ58wgXUSIIoz/odvz5yVYeazIFS3Faww== | general
(2 rows)


On Mon, Jan 28, 2013 at 2:38 PM, Alon Bar-Lev  wrote:

> - Original Message -
> > From: "Dead Horse" 
> > To: "Alon Bar-Lev" 
> > Cc: "users" , "Eli Mesika" 
> > Sent: Monday, January 28, 2013 10:35:34 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> >
> >
> >
> > was in the middle of a fresh engine setup which did not exhibit the
> > symptom. However after running: "engine-config -s
> > AdminPassword=interactive" and restarting the engine service on the
> > clean setup the error message now shows up.
> >
> > - DHC
> >
> >
> >
>
> OK, at least it is related to the admin password.
>
> Please send me the output of:
>
> psql -U engine -d engine -c "select * from vdc_options where option_name
> in ('LocalAdminPassword', 'AdminPassword');"
>
>
> Thanks!
> >
> > On Mon, Jan 28, 2013 at 1:55 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> >
> >
> >
> >
> >
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > Cc: "users" < users@ovirt.org >, "Eli Mesika" < emes...@redhat.com
> > > >
> >
> > > Sent: Monday, January 28, 2013 9:46:53 PM
> > > Subject: Re: [Users] engine Failed to decrypt Data error
> > >
> > >
> > >
> > >
> >
> > > Current running engine build --> commit:
> > > 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> > >
> > > ran engine upgrade against the built rpms from that commit.
> > >
> > >
> > > Thus I applied it as an upgrade against prior running build -->
> > > commit:
> > > 1eb895355239bbcb7a7ceda172405f0b68f18f35
> >
> > [Please use plain text mails in lists.]
> >
> >
> > Can you please patch EncryptionUtils.decrypt() with the following, so
> > I can see what source is? source is encrypted blob, should not be a
> > problem to send it.
> >
> > if (!StringHelper.isNullOrEmpty(source.trim())) {
> > KeyStore store = EncryptionUtils.getKeyStore(keyFile, passwd,
> > certType);
> > Key key = store.getKey(alias, passwd.toCharArray());
> > + log.info ("DEBUG001 " + source);
> > result = decrypt(source, key);
> >
> >
> > }
> >
> >
> > >
> > >
> > >
> > > On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev < alo...@redhat.com >
> > > wrote:
> > >
> > >
> > > How do you installed the engine? you built?
> > > Which exact version?
> > >
> > >
> > > - Original Message -
> > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > >
> > >
> > > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > > emes...@redhat.com
> > > > >
> > > > Sent: Monday, January 28, 2013 9:26:44 PM
> > > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > >
> > > >
> > > > Password length is 11 characters and consists of Upper, Lower
> > > > case
> > > > and one special character.
> > > >
> > > >
> > > >
> > > >
> > > > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com
> > > > >
> > > > wrote:
> > > >
> > > >
> > > > We tried to reproduce this.
> > > > What password do you use? is there one with some great length?
> > > > If not, Eli, we should send a debug patch for this.
> > > >
> > > >
> > > >
> > > > - Original Message -
> > > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > > > To: "< users@ovirt.org >" < users@ovirt.org >
> > > > > Sent: Monday, January 28, 2013 9:16:20 PM
> > > > > Subject: [Users] engine Failed to decrypt Data error
> > > > >
> > > > >
> > > > >
> > > > > I see this repeating error in the engine logs quite a bit, any
> > > > > ideas
> > > > > on what causes it?
> > > > >
> > > > >
> > > > >

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Alon Bar-Lev

- Original Message -
> From: "Dead Horse" 
> To: "Alon Bar-Lev" 
> Cc: "users" , "Eli Mesika" 
> Sent: Monday, January 28, 2013 10:35:34 PM
> Subject: Re: [Users] engine Failed to decrypt Data error
> 
> 
> 
> was in the middle of a fresh engine setup which did not exhibit the
> symptom. However after running: "engine-config -s
> AdminPassword=interactive" and restarting the engine service on the
> clean setup the error message now shows up.
> 
> - DHC
> 
> 
>

OK, at least it is related to the admin password.

Please send me the output of:

psql -U engine -d engine -c "select * from vdc_options where option_name in 
('LocalAdminPassword', 'AdminPassword');"


Thanks! 
> 
> On Mon, Jan 28, 2013 at 1:55 PM, Alon Bar-Lev < alo...@redhat.com >
> wrote:
> 
> 
> 
> 
> 
> - Original Message -
> > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > To: "Alon Bar-Lev" < alo...@redhat.com >
> > Cc: "users" < users@ovirt.org >, "Eli Mesika" < emes...@redhat.com
> > >
> 
> > Sent: Monday, January 28, 2013 9:46:53 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> > 
> > 
> > 
> > 
> 
> > Current running engine build --> commit:
> > 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> > 
> > ran engine upgrade against the built rpms from that commit.
> > 
> > 
> > Thus I applied it as an upgrade against prior running build -->
> > commit:
> > 1eb895355239bbcb7a7ceda172405f0b68f18f35
> 
> [Please use plain text mails in lists.]
> 
> 
> Can you please patch EncryptionUtils.decrypt() with the following, so
> I can see what source is? source is encrypted blob, should not be a
> problem to send it.
> 
> if (!StringHelper.isNullOrEmpty(source.trim())) {
> KeyStore store = EncryptionUtils.getKeyStore(keyFile, passwd,
> certType);
> Key key = store.getKey(alias, passwd.toCharArray());
> + log.info ("DEBUG001 " + source);
> result = decrypt(source, key);
> 
> 
> }
> 
> 
> > 
> > 
> > 
> > On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> > 
> > 
> > How do you installed the engine? you built?
> > Which exact version?
> > 
> > 
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > 
> > 
> > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > Cc: "users" < users@ovirt.org >, "Eli Mesika" <
> > > emes...@redhat.com
> > > > 
> > > Sent: Monday, January 28, 2013 9:26:44 PM
> > > Subject: Re: [Users] engine Failed to decrypt Data error
> > > 
> > > 
> > > Password length is 11 characters and consists of Upper, Lower
> > > case
> > > and one special character.
> > > 
> > > 
> > > 
> > > 
> > > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com
> > > >
> > > wrote:
> > > 
> > > 
> > > We tried to reproduce this.
> > > What password do you use? is there one with some great length?
> > > If not, Eli, we should send a debug patch for this.
> > > 
> > > 
> > > 
> > > - Original Message -
> > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > > To: "< users@ovirt.org >" < users@ovirt.org >
> > > > Sent: Monday, January 28, 2013 9:16:20 PM
> > > > Subject: [Users] engine Failed to decrypt Data error
> > > > 
> > > > 
> > > > 
> > > > I see this repeating error in the engine logs quite a bit, any
> > > > ideas
> > > > on what causes it?
> > > > 
> > > > 
> > > > 2013-01-28 13:13:40,483 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:13:52,747 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:13:52,747 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype
> > > > mismatch:
> > > > 0
> > > > 2013-01-28 13:13:52,761 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-85) Failed to decrypt Data must start
> > > > with
> > > > zero
> > > > 2013-01-28 13:14:00,964 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:00,964 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:02,983 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:02,983 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 
> > > > 
> > > > - DHC
> > > > 
> > > >

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Dead Horse

was in the middle of a fresh engine setup which did not exhibit the
symptom. However after running: "engine-config -s
AdminPassword=interactive" and restarting the engine service on the clean
setup the error message now shows up.

- DHC


On Mon, Jan 28, 2013 at 1:55 PM, Alon Bar-Lev  wrote:

>
>
> - Original Message -
> > From: "Dead Horse" 
> > To: "Alon Bar-Lev" 
> > Cc: "users" , "Eli Mesika" 
> > Sent: Monday, January 28, 2013 9:46:53 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> >
> >
> >
> >
> > Current running engine build --> commit:
> > 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> >
> > ran engine upgrade against the built rpms from that commit.
> >
> >
> > Thus I applied it as an upgrade against prior running build -->
> > commit:
> > 1eb895355239bbcb7a7ceda172405f0b68f18f35
>
> [Please use plain text mails in lists.]
>
>
> Can you please patch EncryptionUtils.decrypt() with the following, so I
> can see what source is? source is encrypted blob, should not be a problem
> to send it.
>
>  if (!StringHelper.isNullOrEmpty(source.trim())) {
>  KeyStore store = EncryptionUtils.getKeyStore(keyFile,
> passwd, certType);
>  Key key = store.getKey(alias, passwd.toCharArray());
> +log.info("DEBUG001 " + source);
>  result = decrypt(source, key);
>  }
>
>
> >
> >
> >
> > On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> >
> >
> > How do you installed the engine? you built?
> > Which exact version?
> >
> >
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> >
> >
> > > To: "Alon Bar-Lev" < alo...@redhat.com >
> > > Cc: "users" < users@ovirt.org >, "Eli Mesika" < emes...@redhat.com
> > > >
> > > Sent: Monday, January 28, 2013 9:26:44 PM
> > > Subject: Re: [Users] engine Failed to decrypt Data error
> > >
> > >
> > > Password length is 11 characters and consists of Upper, Lower case
> > > and one special character.
> > >
> > >
> > >
> > >
> > > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com >
> > > wrote:
> > >
> > >
> > > We tried to reproduce this.
> > > What password do you use? is there one with some great length?
> > > If not, Eli, we should send a debug patch for this.
> > >
> > >
> > >
> > > - Original Message -
> > > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > > To: "< users@ovirt.org >" < users@ovirt.org >
> > > > Sent: Monday, January 28, 2013 9:16:20 PM
> > > > Subject: [Users] engine Failed to decrypt Data error
> > > >
> > > >
> > > >
> > > > I see this repeating error in the engine logs quite a bit, any
> > > > ideas
> > > > on what causes it?
> > > >
> > > >
> > > > 2013-01-28 13:13:40,483 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:13:52,747 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:13:52,747 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch:
> > > > 0
> > > > 2013-01-28 13:13:52,761 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-85) Failed to decrypt Data must start
> > > > with
> > > > zero
> > > > 2013-01-28 13:14:00,964 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:00,964 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:02,983 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > > 2013-01-28 13:14:02,983 ERROR
> > > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > > > longer than 256 bytes
> > > >
> > > >
> > > > - DHC
> > > >
> > > > ___
> > > > Users mailing list
> > > > Users@ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> > >
> >
> >
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] host power managment failures

2013-01-28 Thread Dead Horse

Removing and re-adding the host then configuring power management resolves
this.
 - DHC


On Mon, Jan 28, 2013 at 1:25 PM, Dead Horse
wrote:

> Current running engine build --> commit:
> 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
>
> Host power management is having some issues:
>
> 2013-01-28 13:15:49,320 ERROR [org.ovirt.engine.core.bll.FenceExecutor]
> (ajp--127.0.0.1-8702-11) Illegal value in PM Proxy Preferences string ,
> skipped.
> 2013-01-28 13:15:49,321 ERROR [org.ovirt.engine.core.bll.FenceExecutor]
> (ajp--127.0.0.1-8702-11) Failed to run Power Management command on Host ,
> no running proxy Host was found.
>
> - DHC
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Alon Bar-Lev



- Original Message -
> From: "Dead Horse" 
> To: "Alon Bar-Lev" 
> Cc: "users" , "Eli Mesika" 
> Sent: Monday, January 28, 2013 9:46:53 PM
> Subject: Re: [Users] engine Failed to decrypt Data error
> 
> 
> 
> 
> Current running engine build --> commit:
> 61c11aecc40e755d08b6c34c6fe1c0a07fa94de8
> 
> ran engine upgrade against the built rpms from that commit.
> 
> 
> Thus I applied it as an upgrade against prior running build -->
> commit:
> 1eb895355239bbcb7a7ceda172405f0b68f18f35

[Please use plain text mails in lists.]


Can you please patch EncryptionUtils.decrypt() with the following, so I can see 
what source is? source is encrypted blob, should not be a problem to send it.

 if (!StringHelper.isNullOrEmpty(source.trim())) {
 KeyStore store = EncryptionUtils.getKeyStore(keyFile, passwd, 
certType);
 Key key = store.getKey(alias, passwd.toCharArray());
+log.info("DEBUG001 " + source);
 result = decrypt(source, key);
 }


> 
> 
> 
> On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev < alo...@redhat.com >
> wrote:
> 
> 
> How do you installed the engine? you built?
> Which exact version?
> 
> 
> - Original Message -
> > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> 
> 
> > To: "Alon Bar-Lev" < alo...@redhat.com >
> > Cc: "users" < users@ovirt.org >, "Eli Mesika" < emes...@redhat.com
> > >
> > Sent: Monday, January 28, 2013 9:26:44 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> > 
> > 
> > Password length is 11 characters and consists of Upper, Lower case
> > and one special character.
> > 
> > 
> > 
> > 
> > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> > 
> > 
> > We tried to reproduce this.
> > What password do you use? is there one with some great length?
> > If not, Eli, we should send a debug patch for this.
> > 
> > 
> > 
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > To: "< users@ovirt.org >" < users@ovirt.org >
> > > Sent: Monday, January 28, 2013 9:16:20 PM
> > > Subject: [Users] engine Failed to decrypt Data error
> > > 
> > > 
> > > 
> > > I see this repeating error in the engine logs quite a bit, any
> > > ideas
> > > on what causes it?
> > > 
> > > 
> > > 2013-01-28 13:13:40,483 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:13:52,747 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:13:52,747 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch:
> > > 0
> > > 2013-01-28 13:13:52,761 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-85) Failed to decrypt Data must start
> > > with
> > > zero
> > > 2013-01-28 13:14:00,964 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:00,964 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:02,983 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:02,983 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 
> > > 
> > > - DHC
> > > 
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > > 
> > 
> > 
> 
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Dead Horse

Current running engine build --> commit:
61c11aecc40e755d08b6c34c6fe1c0a07fa94de8

ran engine upgrade against the built rpms from that commit.

Thus I applied it as an upgrade against prior running build --> commit:
1eb895355239bbcb7a7ceda172405f0b68f18f35


On Mon, Jan 28, 2013 at 1:28 PM, Alon Bar-Lev  wrote:

> How do you installed the engine? you built?
> Which exact version?
>
> - Original Message -
> > From: "Dead Horse" 
> > To: "Alon Bar-Lev" 
> > Cc: "users" , "Eli Mesika" 
> > Sent: Monday, January 28, 2013 9:26:44 PM
> > Subject: Re: [Users] engine Failed to decrypt Data error
> >
> >
> > Password length is 11 characters and consists of Upper, Lower case
> > and one special character.
> >
> >
> >
> >
> > On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com >
> > wrote:
> >
> >
> > We tried to reproduce this.
> > What password do you use? is there one with some great length?
> > If not, Eli, we should send a debug patch for this.
> >
> >
> >
> > - Original Message -
> > > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > > To: "< users@ovirt.org >" < users@ovirt.org >
> > > Sent: Monday, January 28, 2013 9:16:20 PM
> > > Subject: [Users] engine Failed to decrypt Data error
> > >
> > >
> > >
> > > I see this repeating error in the engine logs quite a bit, any
> > > ideas
> > > on what causes it?
> > >
> > >
> > > 2013-01-28 13:13:40,483 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:13:52,747 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:13:52,747 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch: 0
> > > 2013-01-28 13:13:52,761 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-85) Failed to decrypt Data must start with
> > > zero
> > > 2013-01-28 13:14:00,964 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:00,964 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:02,983 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > > 2013-01-28 13:14:02,983 ERROR
> > > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > > longer than 256 bytes
> > >
> > >
> > > - DHC
> > >
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
> >
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Alon Bar-Lev

How do you installed the engine? you built?
Which exact version?

- Original Message -
> From: "Dead Horse" 
> To: "Alon Bar-Lev" 
> Cc: "users" , "Eli Mesika" 
> Sent: Monday, January 28, 2013 9:26:44 PM
> Subject: Re: [Users] engine Failed to decrypt Data error
> 
> 
> Password length is 11 characters and consists of Upper, Lower case
> and one special character.
> 
> 
> 
> 
> On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev < alo...@redhat.com >
> wrote:
> 
> 
> We tried to reproduce this.
> What password do you use? is there one with some great length?
> If not, Eli, we should send a debug patch for this.
> 
> 
> 
> - Original Message -
> > From: "Dead Horse" < deadhorseconsult...@gmail.com >
> > To: "< users@ovirt.org >" < users@ovirt.org >
> > Sent: Monday, January 28, 2013 9:16:20 PM
> > Subject: [Users] engine Failed to decrypt Data error
> > 
> > 
> > 
> > I see this repeating error in the engine logs quite a bit, any
> > ideas
> > on what causes it?
> > 
> > 
> > 2013-01-28 13:13:40,483 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:13:52,747 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:13:52,747 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch: 0
> > 2013-01-28 13:13:52,761 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-85) Failed to decrypt Data must start with
> > zero
> > 2013-01-28 13:14:00,964 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:00,964 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:02,983 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:02,983 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 
> > 
> > - DHC
> > 
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> > 
> 
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Dead Horse

Password length is 11 characters and consists of Upper, Lower case and one
special character.


On Mon, Jan 28, 2013 at 1:20 PM, Alon Bar-Lev  wrote:

> We tried to reproduce this.
> What password do you use? is there one with some great length?
> If not, Eli, we should send a debug patch for this.
>
> - Original Message -
> > From: "Dead Horse" 
> > To: "" 
> > Sent: Monday, January 28, 2013 9:16:20 PM
> > Subject: [Users] engine Failed to decrypt Data error
> >
> >
> >
> > I see this repeating error in the engine logs quite a bit, any ideas
> > on what causes it?
> >
> >
> > 2013-01-28 13:13:40,483 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:13:52,747 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:13:52,747 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch: 0
> > 2013-01-28 13:13:52,761 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-85) Failed to decrypt Data must start with
> > zero
> > 2013-01-28 13:14:00,964 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:00,964 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:02,983 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> > longer than 256 bytes
> > 2013-01-28 13:14:02,983 ERROR
> > [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> > (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> > longer than 256 bytes
> >
> >
> > - DHC
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] host power managment failures

2013-01-28 Thread Dead Horse

Current running engine build --> commit:
61c11aecc40e755d08b6c34c6fe1c0a07fa94de8

Host power management is having some issues:

2013-01-28 13:15:49,320 ERROR [org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-11) Illegal value in PM Proxy Preferences string ,
skipped.
2013-01-28 13:15:49,321 ERROR [org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-11) Failed to run Power Management command on Host ,
no running proxy Host was found.

- DHC
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] engine Failed to decrypt Data error

2013-01-28 Thread Alon Bar-Lev

We tried to reproduce this.
What password do you use? is there one with some great length?
If not, Eli, we should send a debug patch for this.

- Original Message -
> From: "Dead Horse" 
> To: "" 
> Sent: Monday, January 28, 2013 9:16:20 PM
> Subject: [Users] engine Failed to decrypt Data error
> 
> 
> 
> I see this repeating error in the engine logs quite a bit, any ideas
> on what causes it?
> 
> 
> 2013-01-28 13:13:40,483 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> longer than 256 bytes
> 2013-01-28 13:13:52,747 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-81) Failed to decrypt Data must not be
> longer than 256 bytes
> 2013-01-28 13:13:52,747 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch: 0
> 2013-01-28 13:13:52,761 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-85) Failed to decrypt Data must start with
> zero
> 2013-01-28 13:14:00,964 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-23) Failed to decrypt Data must not be
> longer than 256 bytes
> 2013-01-28 13:14:00,964 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-20) Failed to decrypt Data must not be
> longer than 256 bytes
> 2013-01-28 13:14:02,983 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-29) Failed to decrypt Data must not be
> longer than 256 bytes
> 2013-01-28 13:14:02,983 ERROR
> [org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
> (QuartzScheduler_Worker-34) Failed to decrypt Data must not be
> longer than 256 bytes
> 
> 
> - DHC
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] engine Failed to decrypt Data error

2013-01-28 Thread Dead Horse

I see this repeating error in the engine logs quite a bit, any ideas on
what causes it?

2013-01-28 13:13:40,483 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-23) Failed to decrypt Data must not be longer than
256 bytes
2013-01-28 13:13:52,747 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-81) Failed to decrypt Data must not be longer than
256 bytes
2013-01-28 13:13:52,747 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-84) Failed to decrypt Blocktype mismatch: 0
2013-01-28 13:13:52,761 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-85) Failed to decrypt Data must start with zero
2013-01-28 13:14:00,964 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-23) Failed to decrypt Data must not be longer than
256 bytes
2013-01-28 13:14:00,964 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-20) Failed to decrypt Data must not be longer than
256 bytes
2013-01-28 13:14:02,983 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-29) Failed to decrypt Data must not be longer than
256 bytes
2013-01-28 13:14:02,983 ERROR
[org.ovirt.engine.core.engineencryptutils.EncryptionUtils]
(QuartzScheduler_Worker-34) Failed to decrypt Data must not be longer than
256 bytes

- DHC
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.2 Release delayed

2013-01-28 Thread Joop

Gianluca Cecchi  wrote:


>
>Hello,
>I was interested on providing feedack for the test day, but I presume
>that no official announcement for beta implies no test day for
>tomorrow, correct?
>Let me know, please, if I have to allocate some of my time for that
>activity.
>
I was wondering the same, are there any directions for helping out on test day?

Joop


-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Data Center is being initialized, please wait for initialization to complete

2013-01-28 Thread Alex Leonhardt

Hi,

Occasionally, mainly after doing larger disk operations, I see this :

  Data Center is being initialized, please wait for initialization to
complete

and then the SPM host changes ...

I didnt see any particular load on that server at the time it happened - I
simply told it to delete some VMs from a export domain.

Any clues ?

Alex


-- 

| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Cannot run VM. Low disk space on relevant Storage Domain

2013-01-28 Thread Alex Leonhardt

is there a wiki article for this ? am sure others will run into this ? (i
did too)

alex


On 27 January 2013 14:31, Dafna Ron  wrote:

> you can set the limit of low disk space using rhevm-config
>
> FreeSpaceCriticalLowInGB: "Critical low disk space alert threshold (in
> GB)" (Value Type: Integer)
> FreeSpaceLow: "Limit of % free disk-space below which it is considered
> low" (Value Type: Integer)*
> *
> run rhevm-config --help for more info on how to use the command.
>
> and note that you need to restart ovirt-engine service after change.
>
>
> On 01/27/2013 11:39 AM, Ricky Schneberger wrote:
> > Hi,
> >
> > I have put up a test environment with oVirt 3.1 and found out (because
> > of limited storage) that when trying to run a vm i got "Error while
> > executing action: Cannot run VM. Low disk space on relevant Storage
> Domain."
> >
> > Disk space on the storage domain is 322GB free (9% of total).
> >
> > Can I change these limits? How are they calculated? By percentage?
> > I dont use quotas anywhere.
> >
> > Regards
> >
> > //Ricky
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
> --
> Dafna Ron
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 

| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] oVirt 3.2 Release delayed

2013-01-28 Thread Gianluca Cecchi

On Sat, Jan 26, 2013 at 10:51 AM, Gianluca Cecchi  wrote:
> On Wed, Jan 23, 2013 at 10:29 PM, Mike Burns wrote:
>> The oVirt 3.2 Release has been delayed due to delays getting a stable
>> oVirt Node available.
>>
>> New Dates
>>
>>   * General availability: 2013-02-06
>>   * Beta release: 2013-01-24
>>   * Test Day: 2013-01-29
>>
>>
>> Thanks
>>
>> Mike
>
> Not to stress it, but any update on beta general availability?
> Did it got the 24th? I didn't see the announcement yet, at least on
> announce archives (I'm not subscribed to that list)...
>
> Thanks for any update
> Gianluca

Hello,
I was interested on providing feedack for the test day, but I presume
that no official announcement for beta implies no test day for
tomorrow, correct?
Let me know, please, if I have to allocate some of my time for that activity.

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] 3.1 to 3.2 migration

Re: [Users] 3.1 to 3.2 migration

Re: [Users] 3.1 to 3.2 migration

Re: [Users] Cannot create vm's from user portal

Re: [Users] oVirt 3.2 Test Day

[Users] oVirt 3.2 Test Day

Re: [Users] oVirt 3.2 Release delayed

Re: [Users] oVirt 3.2 Release delayed

Re: [Users] host power managment failures

[Users] Cannot create vm's from user portal

Re: [Users] engine Failed to decrypt Data error

Re: [Users] host power managment failures

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

Re: [Users] host power managment failures

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

Re: [Users] engine Failed to decrypt Data error

[Users] host power managment failures

Re: [Users] engine Failed to decrypt Data error

[Users] engine Failed to decrypt Data error

Re: [Users] oVirt 3.2 Release delayed

[Users] Data Center is being initialized, please wait for initialization to complete

Re: [Users] Cannot run VM. Low disk space on relevant Storage Domain

Re: [Users] oVirt 3.2 Release delayed

28 matches

Site Navigation

Mail list logo

Footer information