Re: [Users] VM Console Issue.
- Original Message - From: Md Akther Hossain Khan mahossai...@gmail.com To: users@ovirt.org Sent: Sunday, February 10, 2013 5:06:10 PM Subject: [Users] VM Console Issue. Dear All, I am new in this forum. I have installed Ovirt 3.1 successfully. As per I have done the following tasks: 1. Adding Data Center. 2. Adding Storage 3. Adding ISO Domain. (Name of ISO Domain is cloud12) 4. Uploaded ISO using the command (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) 5. Adding HOST. 6. Create VM (New Server Desktop) with VNC console. But when I view the VNC console..It shows nothing but a Black Window. did you add disks to the vm? (vm main tab-disks) did you attach the cd when you start the vm? (run once - boot options) And I see none remarkable error @ tail -f /var/log/ovirt/ovirt-engine/engine.log Only the following things: No one is waiting for resource 'Storage.fce396f2-72cb-11e2-acc2-000c29a7b590 In fact I have been hanging in this place for 3 to 4 days. It would be appreciable if you please help me out from this stuck situation. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] my VMs starts with just 15MB of RAM
On Feb 10, 2013, at 20:18 , Rocky rockyba...@gmail.com wrote: Hi, Today after I reinstalled my hypvervisors I just got 15MB of RAM inside my guests. I hade this problem on one of my hypervisors before but if I started the VMs on the other hypervisors and then migrate the VM to the faulty hypervisor all was ok. Just because of that behavior I then started to reinstall my hypervisors today. I am using Centos 6.3 with Dreyous 3.1 repo. After the install i enabled and installed the Intel(Fake) CPU-package on all of the hypervisors. VMs are not supposed to work with fake virtualization. Fake VMs are started with 20MB total memory. What are you trying to achieve? Why did you install the fake virt package? Now when Im trying to start a VM I only got 15MB of RAM inside the WM, almost impossible to boot of course. One of the machines is definied to use 2048MB and has 2048MB as guaranteed memory. I have attached the vdsm.log from the hypervisor that the VM try to start on. Regards //Ricky vdsm_15MB.log___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] my VMs starts with just 15MB of RAM
Hi Michael, I think I have missunderstod something deeply. After my reinstall of the hypervisors I got The guest virtual machine cannot be started: internal error guest CPU is not compatible with host CPU when trying to run a VM. So I found the Fake package and after I have restarted vdsmd on the hypervisor Webadmin report Intel(Fake) CPU and the VM started, but just with 15-20MB RAM. So what I want to do is to start my VMs on the same hardware they always have been on. :-) My hypervisors are equipped AMD Opteron G3. mvh //Ricky 2013/2/11 Michal Skrivanek michal.skriva...@redhat.com: On Feb 10, 2013, at 20:18 , Rocky rockyba...@gmail.com wrote: Hi, Today after I reinstalled my hypvervisors I just got 15MB of RAM inside my guests. I hade this problem on one of my hypervisors before but if I started the VMs on the other hypervisors and then migrate the VM to the faulty hypervisor all was ok. Just because of that behavior I then started to reinstall my hypervisors today. I am using Centos 6.3 with Dreyous 3.1 repo. After the install i enabled and installed the Intel(Fake) CPU-package on all of the hypervisors. VMs are not supposed to work with fake virtualization. Fake VMs are started with 20MB total memory. What are you trying to achieve? Why did you install the fake virt package? Now when Im trying to start a VM I only got 15MB of RAM inside the WM, almost impossible to boot of course. One of the machines is definied to use 2048MB and has 2048MB as guaranteed memory. I have attached the vdsm.log from the hypervisor that the VM try to start on. Regards //Ricky vdsm_15MB.log___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Console Issue.
Thanks Frankel, We added ISO/NFS Domain Storage Domain from Disk Tab. Meanwhile we attached the CD which we uploaded by (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) this command. But @ VNC console it shows nothing but a black window. On Mon, Feb 11, 2013 at 2:17 PM, Omer Frenkel ofren...@redhat.com wrote: -- *From: *Md Akther Hossain Khan mahossai...@gmail.com *To: *users@ovirt.org *Sent: *Sunday, February 10, 2013 5:06:10 PM *Subject: *[Users] VM Console Issue. Dear All, I am new in this forum. I have installed Ovirt 3.1 successfully. As per I have done the following tasks: 1. Adding Data Center. 2. Adding Storage 3. Adding ISO Domain. (Name of ISO Domain is cloud12) 4. Uploaded ISO using the command (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) 5. Adding HOST. 6. Create VM (New Server Desktop) with VNC console. But when I view the VNC console..It shows nothing but a Black Window. did you add disks to the vm? (vm main tab-disks) did you attach the cd when you start the vm? (run once - boot options) And I see none remarkable error @ tail -f /var/log/ovirt/ovirt-engine/engine.log Only the following things: * No one is waiting for resource 'Storage.fce396f2-72cb-11e2-acc2-000c29a7b590* In fact I have been hanging in this place for 3 to 4 days. It would be appreciable if you please help me out from this stuck situation. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] How do Networks and Vlan-tagging work in oVirt ?
I'm struggeling setting up my network in oVirt at the moment as I would like to seperate specific VM's from other devices/clients in my network. I have decent setup switching network using Vlans, this is also the fact for ovirt and the storage nodes where teh ports are seperated between storage and management. Because I want to manage which client can acces which VM I need Vlan tagging. The question is where are we going to do this, on the VM itself or on the network I attach the VM's Nic to. Because of the lacking documentation at this point it's not clear, so I would like to figure out and maybe change the wiki there. I also cannot understand why I can set an IP to a network and only the subnet where I also can set DHCP which puts also the gateway. I'm not able to set None or DHCP and can only add a network with IP, but what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ? I hope someone can clear this a little bit more out. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] my VMs starts with just 15MB of RAM
On Feb 11, 2013, at 11:09 , Ricky rockyba...@gmail.com wrote: Hi Michael, I think I have missunderstod something deeply. After my reinstall of the hypervisors I got The guest virtual machine cannot be started: internal error guest CPU is not compatible with host CPU when trying to run a VM. So I found the Fake package and after I have restarted vdsmd on the hypervisor Webadmin report Intel(Fake) CPU and the VM started, but just with 15-20MB RAM. Hi, well, fake package is for something totally different. It won't allow you to run anything, it's there for testing purposes only, you won't be able to run a VM. Please try to uninstall it (at worst reinstall the node:-) Then you should see a proper reporting again. Are you sure your Cluster is having the compatible CPU type? Please attach the new logs once the hypervisor is without the fake package… Thanks, michal So what I want to do is to start my VMs on the same hardware they always have been on. :-) My hypervisors are equipped AMD Opteron G3. mvh //Ricky 2013/2/11 Michal Skrivanek michal.skriva...@redhat.com: On Feb 10, 2013, at 20:18 , Rocky rockyba...@gmail.com wrote: Hi, Today after I reinstalled my hypvervisors I just got 15MB of RAM inside my guests. I hade this problem on one of my hypervisors before but if I started the VMs on the other hypervisors and then migrate the VM to the faulty hypervisor all was ok. Just because of that behavior I then started to reinstall my hypervisors today. I am using Centos 6.3 with Dreyous 3.1 repo. After the install i enabled and installed the Intel(Fake) CPU-package on all of the hypervisors. VMs are not supposed to work with fake virtualization. Fake VMs are started with 20MB total memory. What are you trying to achieve? Why did you install the fake virt package? Now when Im trying to start a VM I only got 15MB of RAM inside the WM, almost impossible to boot of course. One of the machines is definied to use 2048MB and has 2048MB as guaranteed memory. I have attached the vdsm.log from the hypervisor that the VM try to start on. Regards //Ricky vdsm_15MB.log___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Console Issue.
- Original Message - From: Md Akther Hossain Khan mahossai...@gmail.com To: Omer Frenkel ofren...@redhat.com Cc: users@ovirt.org Sent: Monday, February 11, 2013 12:32:24 PM Subject: Re: [Users] VM Console Issue. Thanks Frankel, We added ISO/NFS Domain Storage Domain from Disk Tab. Meanwhile we attached the CD which we uploaded by (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) this command. But @ VNC console it shows nothing but a black window. can you attach vdsm log contains the creation of the vm? On Mon, Feb 11, 2013 at 2:17 PM, Omer Frenkel ofren...@redhat.com wrote: From: Md Akther Hossain Khan mahossai...@gmail.com To: users@ovirt.org Sent: Sunday, February 10, 2013 5:06:10 PM Subject: [Users] VM Console Issue. Dear All, I am new in this forum. I have installed Ovirt 3.1 successfully. As per I have done the following tasks: 1. Adding Data Center. 2. Adding Storage 3. Adding ISO Domain. (Name of ISO Domain is cloud12) 4. Uploaded ISO using the command (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) 5. Adding HOST. 6. Create VM (New Server Desktop) with VNC console. But when I view the VNC console..It shows nothing but a Black Window. did you add disks to the vm? (vm main tab-disks) did you attach the cd when you start the vm? (run once - boot options) And I see none remarkable error @ tail -f /var/log/ovirt/ovirt-engine/engine.log Only the following things: No one is waiting for resource 'Storage.fce396f2-72cb-11e2-acc2-000c29a7b590 In fact I have been hanging in this place for 3 to 4 days. It would be appreciable if you please help me out from this stuck situation. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error
Le 09/02/2013 11:26, Nicolas Ecarnot a écrit : Le 08/02/2013 21:54, Richard W.M. Jones a écrit : On Thu, Feb 07, 2013 at 04:48:13PM +0100, Nicolas Ecarnot wrote: Hi, After having successfully migrated Debian, XP, 2003, 2008 VMs, I'm stuck with a migration I was expecting to be easy : RHAS3. Here is the error log I get : # virt-v2v -i libvirt -ic qemu+ssh://@/system -o rhev -os :/data/vmexport -of qcow2 -oa sparse -n ovirtmgmt serv-rhas3-vm1 serv-rhas3-vm1_copy.raw: 100% [=]D 0h10m14s virt-v2v: Pas de capability dans la configuration correspondant à os='linux' name='virtio' distro='rhel' major='3' minor='0' virt-v2v: Pas de capability dans la configuration correspondant à os='linux' name='cirrus' distro='rhel' major='3' minor='0' virt-v2v: WARNING: Le pilote d'affichage a été modifié en cirrus, mais il est impossible d'installer le pilote cirrus. X pourrait ne pas fonctionner correctement virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique /dev/fd0 inconnu. Cette entrée doit être corrigée manuellement après la conversion. virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique /dev/sda inconnu. Cette entrée doit être corrigée manuellement après la conversion. sh: sh: at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm line 200. at /usr/share/perl5/vendor_perl/Sys/VirtConvert/Converter/RedHat.pm line 2321 I don't mind the warnings and I also had such errors I was able to correct manually. But here, the last two lines are lethal. It seems oVirt tries to guess which OS is imported, and tries to do specific actions, and do them bad. Either there's a way o prevent oVirt from guessing, either there's a way to correct the actions oVirt is failing to do... Googling was not that helpful about this issue. I'm not totally clear what RHAS 3 is, but you're correct that virt-v2v has to detect[1] the type of operating system in the guest in order to determine what operations it has to perform on that guest. RHAS stands for redhat advanced server. In our case, this is just an old Red Hat Enterprise Linux AS release 3 (Taroon). It uses the configuration file /etc/virt-v2v.conf to map the guest type into drivers that have to be installed, but some of this is also hard-coded inside the program. Matt (CC'd) might have some more suggestions. I'll be glad to hear from him. Rich. [1] You can find out what virt-v2v (actually, what libguestfs) thinks is in your guest by doing: virt-inspector serv-rhas3-vm1 (virt-inspector2 if this is RHEL 6). I had to install libguestfs-tools.x86_64 to get virt-inspector, and it correctly find it is a RH 3. Am I missing some more packages for the perl scripts to work correctly? This issue looks very similar to what is discussed here: https://bugzilla.redhat.com/show_bug.cgi?id=816930 -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VM Console Issue.
Thanks Frenkel. I have attached the vm creation log of VDSM. On Mon, Feb 11, 2013 at 4:47 PM, Omer Frenkel ofren...@redhat.com wrote: -- *From: *Md Akther Hossain Khan mahossai...@gmail.com *To: *Omer Frenkel ofren...@redhat.com *Cc: *users@ovirt.org *Sent: *Monday, February 11, 2013 12:32:24 PM *Subject: *Re: [Users] VM Console Issue. Thanks Frankel, We added ISO/NFS Domain Storage Domain from Disk Tab. Meanwhile we attached the CD which we uploaded by (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) this command. But @ VNC console it shows nothing but a black window. can you attach vdsm log contains the creation of the vm? On Mon, Feb 11, 2013 at 2:17 PM, Omer Frenkel ofren...@redhat.com wrote: -- *From: *Md Akther Hossain Khan mahossai...@gmail.com *To: *users@ovirt.org *Sent: *Sunday, February 10, 2013 5:06:10 PM *Subject: *[Users] VM Console Issue. Dear All, I am new in this forum. I have installed Ovirt 3.1 successfully. As per I have done the following tasks: 1. Adding Data Center. 2. Adding Storage 3. Adding ISO Domain. (Name of ISO Domain is cloud12) 4. Uploaded ISO using the command (engine-iso-uploader upload -i cloud12 Centos_6.3_64bit.iso) 5. Adding HOST. 6. Create VM (New Server Desktop) with VNC console. But when I view the VNC console..It shows nothing but a Black Window. did you add disks to the vm? (vm main tab-disks) did you attach the cd when you start the vm? (run once - boot options) And I see none remarkable error @ tail -f /var/log/ovirt/ovirt-engine/engine.log Only the following things: * No one is waiting for resource 'Storage.fce396f2-72cb-11e2-acc2-000c29a7b590* In fact I have been hanging in this place for 3 to 4 days. It would be appreciable if you please help me out from this stuck situation. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Thread-329::DEBUG::2013-02-11 19:51:34,006::BindingXMLRPC::161::vds::(wrapper) [192.168.71.71] Thread-329::DEBUG::2013-02-11 19:51:34,007::task::568::TaskManager.Task::(_updateState) Task=`5ff2773d-21ee-422f-a4df-4bc20cacac67`::moving from state init - state preparing Thread-329::INFO::2013-02-11 19:51:34,007::logUtils::37::dispatcher::(wrapper) Run and protect: getAllTasksStatuses(spUUID=None, options=None) Thread-329::DEBUG::2013-02-11 19:51:34,008::taskManager::102::TaskManager::(getAllTasksStatuses) Entry. Thread-329::DEBUG::2013-02-11 19:51:34,008::taskManager::93::TaskManager::(getTaskStatus) Entry. taskID: 7f2adac1-8eff-4381-8420-5c450d60959a Thread-329::DEBUG::2013-02-11 19:51:34,008::taskManager::96::TaskManager::(getTaskStatus) Return. Response: {'code': 0, 'message': '1 jobs completed successfully', 'taskState': 'finished', 'taskResult': 'success', 'taskID': '7f2adac1-8eff-4381-8420-5c450d60959a'} Thread-329::DEBUG::2013-02-11 19:51:34,008::taskManager::113::TaskManager::(getAllTasksStatuses) Return: {'7f2adac1-8eff-4381-8420-5c450d60959a': {'code': 0, 'message': '1 jobs completed successfully', 'taskState': 'finished', 'taskResult': 'success', 'taskID': '7f2adac1-8eff-4381-8420-5c450d60959a'}} Thread-329::INFO::2013-02-11 19:51:34,008::logUtils::39::dispatcher::(wrapper) Run and protect: getAllTasksStatuses, Return response: {'allTasksStatus': {'7f2adac1-8eff-4381-8420-5c450d60959a': {'code': 0, 'message': '1 jobs completed successfully', 'taskState': 'finished', 'taskResult': 'success', 'taskID': '7f2adac1-8eff-4381-8420-5c450d60959a'}}} Thread-329::DEBUG::2013-02-11 19:51:34,009::task::1151::TaskManager.Task::(prepare) Task=`5ff2773d-21ee-422f-a4df-4bc20cacac67`::finished: {'allTasksStatus': {'7f2adac1-8eff-4381-8420-5c450d60959a': {'code': 0, 'message': '1 jobs completed successfully', 'taskState': 'finished', 'taskResult': 'success', 'taskID': '7f2adac1-8eff-4381-8420-5c450d60959a'}}} Thread-329::DEBUG::2013-02-11 19:51:34,009::task::568::TaskManager.Task::(_updateState) Task=`5ff2773d-21ee-422f-a4df-4bc20cacac67`::moving from state preparing - state finished Thread-329::DEBUG::2013-02-11 19:51:34,009::resourceManager::809::ResourceManager.Owner::(releaseAll) Owner.releaseAll requests {} resources {} Thread-329::DEBUG::2013-02-11 19:51:34,009::resourceManager::844::ResourceManager.Owner::(cancelAll) Owner.cancelAll requests {} Thread-329::DEBUG::2013-02-11 19:51:34,010::task::957::TaskManager.Task::(_decref) Task=`5ff2773d-21ee-422f-a4df-4bc20cacac67`::ref 0 aborting False Thread-330::DEBUG::2013-02-11 19:51:34,099::BindingXMLRPC::161::vds::(wrapper) [192.168.71.71] Thread-330::DEBUG::2013-02-11 19:51:34,100::task::568::TaskManager.Task::(_updateState) Task=`338da6a5-402b-40ed-9a4c-184d267d5ee0`::moving from state init - state preparing Thread-330::INFO::2013-02-11 19:51:34,100::logUtils::37::dispatcher::(wrapper) Run and protect:
Re: [Users] Add NIC directly to VM (Dedicated)
On Sun, Feb 10, 2013 at 05:07:08PM +0100, Matt . wrote: 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 16:36, Matt . wrote: Hi, I'm thinking about the way how I did that with the dedicated NIC to the VM. I was discussing this a couple of months ago on IRC but I can't remeber and I already tried to do this... no luck yet. I remember that the NICS were just available when adding a nic to the VM, by MAC-address. Can't figure it out yet what I did those except of not sleeping that much :) I don't remember that, sorry... About the error that I get I do the following: Hosts Network Interfaces Setup Host Networks. When I drag a network I created to a NIC and I don't set an IP or DHCP or None I get that error: Error while executing action Setup Networks: Illegal or Incomplete IP Address When I set and IP to that network that is draaged to the Nic I don't get an error, but why only and IP and no GW as this is IP seems to be bridged in the host to the VM where you add a Nic to with that same network you just gave an IP. When saying the above, could have been possible that I have set the Mac-Address of the real Nic @ the VM Nic ? As this is possible that might have been the solution I used ? For the rest this software is good and the support is superb! I can't reproduce this error, Neither do I. Which ovirt-engine version do you have installed? its look like UI validation... Alona,Moti did you encounter this error? Here: http://www.mail-archive.com/users@ovirt.org/msg06261.html Do you mean that your issue is the same? Does it go away if you make sure that the ip and subnet fields are blank (even when you select None)? Would you attach the vdsm.log section with 'call setupNetwork', and maybe a screenshot of the dialog that is opened after you press the little pencil? Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Error while executing action Setup Networks
I found the issue, there is a little icon of a pencil that you need to click on in order to specify what IP you want the connection to use. Once I did that it worked perfectly. Also, I noticed that the interface for assigning virtual networks to physical interfaces does NOT work correctly in the latest version of google chrome. I had to flip into firefox ... I'm not sure if that is documented any where. Can you please give more details of what didn't work for you on chrome? I tried to post this to the list earlier today but my message did not go to the list only directly to myself ... sorry for wasting your time. Jake Sallee Godfather of Bandwidth Network Engineer University of Mary Hardin-Baylor 900 College St. Belton, Texas 76513 Fone: 254-295-4658 Phax: 254-295-4221 From: users-boun...@ovirt.org [users-boun...@ovirt.org] on behalf of Antoni Segura Puimedon [asegu...@redhat.com] Sent: Wednesday, February 06, 2013 5:07 PM To: users@ovirt.org Subject: Re: [Users] Error while executing action Setup Networks Hi, I can see that you set a PREFIX, but I can't see any IPADDR in the ifcfg-eth0, nor in the setupNetworks command. Which IPADDR do you intend to set? - Original Message - From: Stephen Sallee (Jake) jake.sal...@umhb.edu To: users@ovirt.org Sent: Wednesday, February 6, 2013 6:50:14 PM Subject: [Users] Error while executing action Setup Networks I'm trying to add the ovirtmgmt role to my network connection on my all-in-one box but when I do I get this error: Error while executing action Setup Networks: Illegal or Incomplete IP Address The IP is correct as I am accessing the portal from a different computer, also when I look at the ifcfg-eth0 file: DEVICE=eth0 ONBOOT=yes HWADDR=[REDACTED] BRIDGE=ovirtmgmt NM_CONTROLLED=yes DOMAIN=UMHB.edu IPV6INIT=no LAST_CONNECT=1360136903 DNS2=[REDACTED] DNS1=[REDACTED] DEFROUTE=yes IPV4_FAILURE_FATAL=yes PREFIX=24 UUID=[REDACTED] ... it just feels right, i know its probably useless to a hacker but I fell better, okay? I have tried NM_CONTROLLED=yes and NM_CONTROLLED=no , with no difference. Here is the snippet from the engine log: [root@otto ~]# tail -f /var/log/ovirt-engine/engine.log 2013-02-06 11:20:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-43) Autorecovering hosts is disabled, skipping 2013-02-06 11:20:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-43) Autorecovering storage domains is disabled, skipping 2013-02-06 11:25:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-98) Autorecovering hosts is disabled, skipping 2013-02-06 11:25:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-98) Autorecovering storage domains is disabled, skipping 2013-02-06 11:30:00,000 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-60) Autorecovering hosts is disabled, skipping 2013-02-06 11:30:00,000 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-60) Autorecovering storage domains is disabled, skipping 2013-02-06 11:35:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-11) Autorecovering hosts is disabled, skipping 2013-02-06 11:35:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-11) Autorecovering storage domains is disabled, skipping 2013-02-06 11:40:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-65) Autorecovering hosts is disabled, skipping 2013-02-06 11:40:00,001 INFO [org.ovirt.engine.core.bll.AutoRecoveryManager] (QuartzScheduler_Worker-65) Autorecovering storage domains is disabled, skipping 2013-02-06 11:40:46,131 INFO [org.ovirt.engine.core.bll.SetupNetworksCommand] (ajp--127.0.0.1-8702-2) [6cf1af54] Running command: SetupNetworksCommand internal: false. Entities affected : ID: 8a682fca-7032-11e2-8be0-cb1656457e1f Type: VDS 2013-02-06 11:40:46,133 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand] (ajp--127.0.0.1-8702-2) [6cf1af54] START, SetupNetworksVDSCommand(HostName = local_host, HostId = 8a682fca-7032-11e2-8be0-cb1656457e1f, force=false, checkConnectivity=true, conectivityTimeout=120, networks=[ovirtmgmt {id=6990dee0-6a13-4b74-811b-5accbae04194, description=Management Network, subnet=null, gateway=null, type=null, vlan_id=null, stp=false, storage_pool_id=501286c6-46d0-4f6f-a73c-e09e21778b1c, mtu=0, vmNetwork=true, cluster=network_cluster {id={clusterId=null, networkId=null}, status=Operational, is_display=false, required=true}}], bonds=[], interfaces=[eth0 {id=c2ceb17b-0ae1-4409-bfab-c84be5c8030b,
Re: [Users] Add NIC directly to VM (Dedicated)
Matt, I attached a hook that will give you a kick start on the promisc mode, it implemented only the mirror mode which is a part of vdsm now but you can look at the comments and the README file that have the appropriate in-line mode commands and implementation. Shahar Havivi. On 10.02.13 17:07, Matt . wrote: Here: http://www.mail-archive.com/users@ovirt.org/msg06261.html 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 16:36, Matt . wrote: Hi, I'm thinking about the way how I did that with the dedicated NIC to the VM. I was discussing this a couple of months ago on IRC but I can't remeber and I already tried to do this... no luck yet. I remember that the NICS were just available when adding a nic to the VM, by MAC-address. Can't figure it out yet what I did those except of not sleeping that much :) I don't remember that, sorry... About the error that I get I do the following: Hosts Network Interfaces Setup Host Networks. When I drag a network I created to a NIC and I don't set an IP or DHCP or None I get that error: Error while executing action Setup Networks: Illegal or Incomplete IP Address When I set and IP to that network that is draaged to the Nic I don't get an error, but why only and IP and no GW as this is IP seems to be bridged in the host to the VM where you add a Nic to with that same network you just gave an IP. When saying the above, could have been possible that I have set the Mac-Address of the real Nic @ the VM Nic ? As this is possible that might have been the solution I used ? For the rest this software is good and the support is superb! I can't reproduce this error, its look like UI validation... Alona,Moti did you encounter this error? Thanks so far again. Matt 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 16:16, Matt . wrote: Hi Shahar, Thanks, I need to work this out further to have it 100% visible. I wonder why I was able in the past (3.1) to dedicate an NIC to a VM. Do you also have an explanation why I cannot save a network configuration with a nic in DHCP mode ? It complains about a wrong IP and I have seen it should be a bug. Is this right ? How did you that... I.e can you tell me the steps that you made in the UI? (for both cases) Cheers, Matt 2013/2/10 Shahar Havivi shah...@redhat.com On 10.02.13 14:13, Dan Kenigsberg wrote: On Sun, Feb 10, 2013 at 12:19:57PM +0100, Matt . wrote: Hi, For setting up a firewall in a VM I would like to add 2 of my 4 nics directly to a VM. In my previous setup I thought I have done that, but at the moment I cannot figure this out and cannot find the docs to accomplish this. I would like to dedicate those 2 nics to my firewall VM's to avoid sharing them using a network per accident to other VM's. How is this be done at the moment ? AFAIK it can be done only with a vdsm hook. You'd need to define your VM with no interface at all, but instead, mark it with a special custom property you define. Then, you should write a hook that adds the two host interfaces to the VM, by means of either http://libvirt.org/formatdomain.html#elementsNICSDirect or http://libvirt.org/formatdomain.html#elementsNICSHostdev Most probably, you would need to pin your firewall VM to a specific host. Writing a hook is not too complex, but it requires understanding of how vdsm and libvirt works. You can take http://gerrit.ovirt.org/gitweb?p=vdsm.git;a=tree;f=vdsm_hooks/vmfexas a reference, or ask for specific guidance here. Dan. Dan is right, Currently you can do it via hook, We do have promisc mode but currently we have mirroring mode only (ie you can monitor each VM traffic but cannot intercept it). The way to do it is via layer 2. its best to implement after_vm_start hook and use ebtables. you can pass to the hook the network name. when you have the network name you can prob for its mac address and in the libvirt xml you can view the interfaces that are part of that network and get the mac addresses as well. (look at other hooks as Dan point out) when you have the network name the network mac and the target interface you can use ebtables: 1. set the bridge in promisc mode $ ifconfig netwok name promisc 2. traffic to the monitoring machine $ ebtables -t nat -A PREROUTING -d 00:1a:4a:16:01:51 -i eth0 -j dnat --to-destination 00:1a:4a:16:01:11 3. traffic from the monitoring machine $ ebtables -t
Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error
Le 11/02/2013 11:47, Nicolas Ecarnot a écrit : This issue looks very similar to what is discussed here: https://bugzilla.redhat.com/show_bug.cgi?id=816930 I'm so sorry to debug that issue in a so crappy manner, but I have to keep going. I just commented out _configure_boot($kernel, $virtio, $g, $root, $desc); in Redhat.pm and it ran with no error. I'd be very glad to hear from Matt... -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] windows guest user agent
Hi Stephen, Just to be clear: there is a moderation queue for wiki accounts, but we hand those things out completely freely - it is purely an anti-spam measure. Head on over to http://www.ovirt.org/Special:RequestAccount and I will approve your request ASAP! Thanks, Dave. On 02/08/2013 09:52 PM, Sallee, Stephen (Jake) wrote: I would love to. I thought I needed to have some special account. You know, have some street cred first :) Jake Sallee Godfather of Bandwidth System Engineer University of Mary Hardin-Baylor 900 College St. Belton TX. 76513 Fone: 254-295-4658 Phax: 254-295-4221 HTTP://WWW.UMHB.EDU -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Friday, February 08, 2013 1:23 AM To: Sallee, Stephen (Jake) Cc: users@ovirt.org Subject: Re: [Users] windows guest user agent On 07/02/2013 20:19, Sallee, Stephen (Jake) wrote: Perfect THANK YOU! Why couldn't I find that link anywhere? I would think that it would at least be on the ovirt website. so how about helping the next guy and wiki-fying it? Thanks, Itamar Jake Sallee Godfather of Bandwidth System Engineer University of Mary Hardin-Baylor 900 College St. Belton TX. 76513 Fone: 254-295-4658 Phax: 254-295-4221 HTTP://WWW.UMHB.EDU *From:*Gianluca Cecchi [mailto:gianluca.cec...@gmail.com] *Sent:* Thursday, February 07, 2013 12:15 PM *To:* Sallee, Stephen (Jake) *Cc:* users *Subject:* Re: [Users] windows guest user agent Il giorno 07/feb/2013 19:05, Sallee, Stephen (Jake) jake.sal...@umhb.edu mailto:jake.sal...@umhb.edu ha scritto: I have been googeling trying to find info on how to install the guest agent for windows, can anyone give me some insight? I did find some instructions on how to build it from inside the VM, but the instructions a several months old and before I try them I would like to make sure they are still the best method. http://gerrit.ovirt.org/gitweb?p=ovirt-guest-agent.git;a=blob;f=ovirt- guest-agent/README-windows.txt;h=bf6bb3c18567537489b56e6888b2eb7f025cc 4f9;hb=HEAD Jake Sallee Godfather of Bandwidth System Engineer University of Mary Hardin-Baylor 900 College St. Belton TX. 76513 Fone: 254-295-4658 Phax: 254-295-4221 HTTP://WWW.UMHB.EDU ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users See here the spice-guest-tools iso: http://spice-space.org/download.html http://spice-space.org/download/binaries/spice-guest-tools/spice-guest -tools-0.3.exe Hih, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error
On Fri, 2013-02-08 at 20:54 +, Richard W.M. Jones wrote: On Thu, Feb 07, 2013 at 04:48:13PM +0100, Nicolas Ecarnot wrote: Hi, After having successfully migrated Debian, XP, 2003, 2008 VMs, I'm stuck with a migration I was expecting to be easy : RHAS3. Here is the error log I get : # virt-v2v -i libvirt -ic qemu+ssh://@/system -o rhev -os :/data/vmexport -of qcow2 -oa sparse -n ovirtmgmt serv-rhas3-vm1 serv-rhas3-vm1_copy.raw: 100% [=]D 0h10m14s virt-v2v: Pas de capability dans la configuration correspondant à os='linux' name='virtio' distro='rhel' major='3' minor='0' virt-v2v: Pas de capability dans la configuration correspondant à os='linux' name='cirrus' distro='rhel' major='3' minor='0' virt-v2v: WARNING: Le pilote d'affichage a été modifié en cirrus, mais il est impossible d'installer le pilote cirrus. X pourrait ne pas fonctionner correctement virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique /dev/fd0 inconnu. Cette entrée doit être corrigée manuellement après la conversion. virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique /dev/sda inconnu. Cette entrée doit être corrigée manuellement après la conversion. sh: sh: at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm line 200. at /usr/share/perl5/vendor_perl/Sys/VirtConvert/Converter/RedHat.pm line 2321 I'd need to know exactly which version of virt-v2v you're running in order to diagnose the above. I think the unknown fd0 was fixed a while back, though. Are you running the latest available version? Matt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Move single vmdk (or else) disk into oVirt/RHEV
Hi, I find it hard to find any information about the way I have to follow to convert/import a vmdk/qcow/raw/etc... single disk into an oVirt disks list. I know how to use virt-v2v to import complete VMs (disk AND config), but don't know how to handle a single data disk. Regards, -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error
On Mon, Feb 11, 2013 at 3:07 PM, Matthew Booth wrote: I'd need to know exactly which version of virt-v2v you're running in at the beginning of this same thread, after I asked the same thing, on Feb 8th Nicolas wrote: - Fedora 17 64 bits - virt-v2v.x86_64version 0.8.8-1.fc17 - every ovirt component is of the family 3.1.0-4.fc17 I presume it remained the same ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] rhevm_admin_password = engine_admin_password ?
On 02/08/2013 11:45 AM, Yair Zaslavsky wrote: - Original Message - From: Jorick Astrego jor...@netbulae.eu To: users@ovirt.org Sent: Friday, February 8, 2013 6:07:50 PM Subject: [Users] rhevm_admin_password = engine_admin_password ? Hi, Just a quick question. I have PXE boot setup correctly now and like to do an unattended install. In the rhev-m documentation I see the parameter rhevm_admin_password . Is this engine_admin_password in ovirt? Probably yes, Are you referring to the password of the administrator of oVirt? This sounds more like an ovirt-node parameter. It is a parameter that sets the password on ovirt-node that you can use when you add an ovirt-node host to ovirt engine by clicking New Host. It sets a password on ovirt-node. Mike -- Regards, Jorick Astrego Netbulae B.V. Site: http://www.netbulae.eu ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Fedora 17 firefox not optimal for 3.2 beta
Hello, connecting to ovirt 3.2 beta from F17 with firefox-18.0-1.fc17.x86_64 I receive This Browser version isn't optimal for displaying the application graphics (refer to Documentation for details) How is the check made to show or not the warning? What is the current status of supported browsers? I remember someone posting a page with browser support but I'm unable to find it right now... I remember also on December the thread [Users] Using the chrome/chromium browser with oVirt Did it go ahead with chrome spice-xpi patches applied and so now chrome usable in f17 / f18 (btw on my f17 I have google-chrome-stable-24.0.1312.69-180721.x86_64 if needed for testing)? Thanks, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Fedora 17 firefox not optimal for 3.2 beta
On 02/12/2013 11:32 AM, Gianluca Cecchi wrote: Hello, connecting to ovirt 3.2 beta from F17 with firefox-18.0-1.fc17.x86_64 I receive This Browser version isn't optimal for displaying the application graphics (refer to Documentation for details) How is the check made to show or not the warning? What is the current status of supported browsers? 'Firefox 17 on Linux' and 'Internet Explorer 9+ on any OS'. If you use any browser other than these, you will see the 'isn't optimal' warning. Thanks, Kanagaraj I remember someone posting a page with browser support but I'm unable to find it right now... I remember also on December the thread [Users] Using the chrome/chromium browser with oVirt Did it go ahead with chrome spice-xpi patches applied and so now chrome usable in f17 / f18 (btw on my f17 I have google-chrome-stable-24.0.1312.69-180721.x86_64 if needed for testing)? Thanks, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users