Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19)
When you added the host, did you provide a password or a ssh public key? - Original Message - From: Udaya Kiran P ukiran...@yahoo.in To: Nir Soffer nsof...@redhat.com Cc: Meital Bourvine mbour...@redhat.com, users users@ovirt.org Sent: Wednesday, February 19, 2014 9:58:12 AM Subject: Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19) Hi Nir, I have tried approving the host after executing setenforce 0 on the host. This time the error in the Management Events says - Installation Failed. Unable to Parse the Host key. What is causing this? Thanks for your help. Regards, Udaya Kiran On Wednesday, 19 February 2014 1:03 PM, Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Udaya Kiran P ukiran...@yahoo.in To: Meital Bourvine mbour...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, February 19, 2014 9:21:56 AM Subject: Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19) Hi Meital, There isn't any logs in the folder - /var/log/ovirt-engine/host-deploy When I tried to ssh from the Engine to the Host I get the error message - Read from socket failed: Connection reset by peer . service sshd status in the Host shows - fatal: Write permission denied. Being able to login to the host using ssh is required for installing a host, and required for soft-fencing feature. You should fix your host configuration. One direction I would check is selinux issues. Try to disabe selinux and check if the login issue is fixed, and check /var/log/messages for selinux warnings during the login. See https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Working_with_SELinux-Enabling_and_Disabling_SELinux.html Please find the screenshots. Appreiciate your inputs. Thank You. Regards, Udaya Kiran On Wednesday, 19 February 2014 12:39 PM, Meital Bourvine mbour...@redhat.com wrote: Hi Udaya, Can you please attach the relevant /var/log/ovirt-engine/host-deploy/ log? From: Udaya Kiran P ukiran...@yahoo.in To: users users@ovirt.org Sent: Wednesday, February 19, 2014 9:04:56 AM Subject: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19) Hi All, I am trying to approve a oVirtNode Host from oVirtManagement, but the host installation fails. Events logged shows a message - Host installation failed. SSH session closed during connection. This bug is found reported at https://bugzilla.redhat.com/show_bug.cgi?id=1037939 Please suggest any fixes or workarounds. Appreciate your help, Thank You, Regards, Udaya Kiran ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage Performance Issue !
Actually, I meant how is the network configured rhevm side?
are all vm's writing on rhevm interface?
Itamar, Should local storage be used this way in rhevm?
On 02/19/2014 03:56 AM, Vishvendra Singh Chauhan wrote:
Hi,
My network is 1 Gigabit. And i am using my each node in a separate
cluster/DC.
And memory and processor uses are very low. Means when i run 30 vms
then it's processor uses is 45% and memory uses is 35% around.
On Tue, Feb 18, 2014 at 2:14 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com wrote:
what is the network configuration? are you using each host with
it's own cluster/DC as a local storage host?
how many hosts are we talking about? what is the memory/cpu
consumption on the hosts?
On 02/18/2014 01:18 AM, Vishvendra Singh Chauhan wrote:
Thanks Dafna,
I am Using Dell server Just as node, My manager is running on
other machine. On each node we have 40 vm's running. and all
most vm's has RHEL6 os. Now the problem about performance of
vm's, when client is writing the data in vm, they are
reporting, that they have very slow speed to write the data.
I also feel slow performance at writing speed in the vm's, So
now please suggest, is any way to improve the writing speed in
virtual machine's ?.
On Mon, Feb 17, 2014 at 2:40 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com mailto:d...@redhat.com
mailto:d...@redhat.com wrote:
please give more information.
what do you mean by storage performance?
how many vm's are you running?
are you using the Dell as just a host or is engine also
installed
on it?
On 02/17/2014 03:26 AM, Vishvendra Singh Chauhan wrote:
Hello Group,
Please help me out in storage issue in ovirt.
I am using Dell PowerEdge XD 720 servers, as node in
Ovirt.
Every node has 24TB storage space, so i am using all this
space as the local storage in that.. But still i am
facing the
problem in storgae performance. My guests os are very
slow to
write the data.
So please give me, some tips using them i can increase the
performance in storage.
-- /*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
___
Users mailing list
Users@ovirt.org mailto:Users@ovirt.org
mailto:Users@ovirt.org mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
-- Dafna Ron
--
/*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
--
Dafna Ron
--
/*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
--
Dafna Ron
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Unable to Remove Template, if VM exists.
As long as the vm is linked to the template (which means you created the vm as a thin provision copy) you cannot delete the template. what you can do to work around this is: 1. export the vm and template to an export domain 2. delete the vm and template from the source setup only 3. try to import the vm as clone other way is: 1. create a template from the vm 2. create a new vm from the template (make sure to create a clone and not a thin copy this time :)) Dafna On 02/19/2014 06:22 AM, Tejesh M wrote: Hi All, I'm not able to Delete Template, if the VM is exists which is deployed from that Template. How can i delete Template leaving the VM as is? Thanks Regards, Tejesh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dafna Ron ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt 3.3.2 Cannot attach POSIX (gluster) storage domain
- Original Message - From: Steve Dainard sdain...@miovision.com To: Nir Soffer nsof...@redhat.com Cc: users users@ovirt.org Sent: Tuesday, February 11, 2014 7:42:37 PM Subject: Re: [Users] Ovirt 3.3.2 Cannot attach POSIX (gluster) storage domain Enabled logging, logs attached. According to sanlock and gluster log: 1. on the host, sanlock is failing write to the ids volume 2. on the gluster side we see failure to heal the ids file. This looks like glusterfs issue, and should be handled by glusterfs folks. You probably should configure sanlock log level back to the default by commenting out the configuration I suggested in the previous mail. According to gluster configuration in this log, this looks like 2 replicas with auto quorum. This setup is not recommended because both machines must be up all the time. When one machine is down, your entire storage is down. Check this post explaining this issue: http://lists.ovirt.org/pipermail/users/2014-February/021541.html Thanks, Nir ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt 3.3.4 beta is now available
The oVirt team is pleased to announce that the 3.3.4 Beta is now available in beta [1] repository for testing. Feel free to join us testing it! You'll find all needed info for installing it on the release notes page, already available on the wiki [2]. A new oVirt Node build will be available soon as well. [1] http://resources.ovirt.org/releases/beta/ [2] http://www.ovirt.org/OVirt_3.3.4_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Nodes lose storage at random
- Original Message - From: Johan Kooijman m...@johankooijman.com To: users users@ovirt.org Sent: Tuesday, February 18, 2014 1:32:56 PM Subject: [Users] Nodes lose storage at random Hi All, We're seeing some weird issues in our ovirt setup. We have 4 nodes connected and an NFS (v3) filestore (FreeBSD/ZFS). Once in a while, it seems at random, a node loses their connection to storage, recovers it a minute later. The other nodes usually don't lose their storage at that moment. Just one, or two at a time. We've setup extra tooling to verify the storage performance at those moments and the availability for other systems. It's always online, just the nodes don't think so. In the logs, we see that vdsm was restarted: MainThread::DEBUG::2014-02-18 10:48:35,809::vdsm::45::vds::(sigtermHandler) Received signal 15 But we don't know why it happened. Please attach also /var/log/messages and /var/log/sanlock.log around the time that vdsm was restarted. Thanks, Nir ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage Performance Issue !
On 02/19/2014 10:48 AM, Dafna Ron wrote:
Actually, I meant how is the network configured rhevm side?
are all vm's writing on rhevm interface?
Itamar, Should local storage be used this way in rhevm?
I see no issue using ovirt to manage standalone hosts with their local
storage.
network isn't a factor in this case.
how many spindles on the host? what is the load on the disks you see at
host level? which vdisk type are you using (ide/virtio-block/virtio-scsi)?
On 02/19/2014 03:56 AM, Vishvendra Singh Chauhan wrote:
Hi,
My network is 1 Gigabit. And i am using my each node in a separate
cluster/DC.
And memory and processor uses are very low. Means when i run 30 vms
then it's processor uses is 45% and memory uses is 35% around.
On Tue, Feb 18, 2014 at 2:14 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com wrote:
what is the network configuration? are you using each host with
it's own cluster/DC as a local storage host?
how many hosts are we talking about? what is the memory/cpu
consumption on the hosts?
On 02/18/2014 01:18 AM, Vishvendra Singh Chauhan wrote:
Thanks Dafna,
I am Using Dell server Just as node, My manager is running on
other machine. On each node we have 40 vm's running. and all
most vm's has RHEL6 os. Now the problem about performance of
vm's, when client is writing the data in vm, they are
reporting, that they have very slow speed to write the data.
I also feel slow performance at writing speed in the vm's, So
now please suggest, is any way to improve the writing speed in
virtual machine's ?.
On Mon, Feb 17, 2014 at 2:40 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com mailto:d...@redhat.com
mailto:d...@redhat.com wrote:
please give more information.
what do you mean by storage performance?
how many vm's are you running?
are you using the Dell as just a host or is engine also
installed
on it?
On 02/17/2014 03:26 AM, Vishvendra Singh Chauhan wrote:
Hello Group,
Please help me out in storage issue in ovirt.
I am using Dell PowerEdge XD 720 servers, as node in
Ovirt.
Every node has 24TB storage space, so i am using all this
space as the local storage in that.. But still i am
facing the
problem in storgae performance. My guests os are very
slow to
write the data.
So please give me, some tips using them i can increase
the
performance in storage.
-- /*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
___
Users mailing list
Users@ovirt.org mailto:Users@ovirt.org
mailto:Users@ovirt.org mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
-- Dafna Ron
-- /*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
-- Dafna Ron
--
/*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] new oVirt look-and-feel -- feature page
- Original Message - From: Eli Mesika emes...@redhat.com To: Greg Sheremeta gsher...@redhat.com Cc: a...@ovirt.org, users users@ovirt.org Sent: Tuesday, February 18, 2014 10:27:42 PM Subject: Re: new oVirt look-and-feel -- feature page - Original Message - From: Greg Sheremeta gsher...@redhat.com To: users users@ovirt.org, a...@ovirt.org Sent: Tuesday, February 18, 2014 11:19:18 PM Subject: new oVirt look-and-feel -- feature page Hi, Please check out the feature page for the new oVirt look-and-feel, PatternFly based: http://www.ovirt.org/Features/NewLookAndFeelPatternFlyPhase1. Comments are welcome. Really cool Indeed, it looks great! Thanks, Greg Greg Sheremeta Red Hat, Inc. Sr. Software Engineer, RHEV Cell: 919-807-1086 gsher...@redhat.com ___ Arch mailing list a...@ovirt.org http://lists.ovirt.org/mailman/listinfo/arch ___ Arch mailing list a...@ovirt.org http://lists.ovirt.org/mailman/listinfo/arch ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19)
Hi All, I have disabled the selinux by setenforce 0. Not sure if its related to the bug apache-sshd downgrading mentioned in - https://bugzilla.redhat.com/show_bug.cgi?id=1021273 Below are the errors logged in engine.log. Appreciate your help. 2014-02-19 05:06:45,232 INFO [org.ovirt.engine.core.register.RegisterServlet] (ajp--127.0.0.1-8702-7) [1cb2fef] Succeeded to run RegisterVds. 2014-02-19 05:58:01,374 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:04,397 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:09,433 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:14,428 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:14,909 ERROR [org.ovirt.engine.core.bll.GetServerSSHKeyFingerprintQuery] (ajp--127.0.0.1-8702-11) Could not fetch fingerprint of host 10.10.155.240 with message: IOException: SSH session closed during connection '10.10.155.240' 2014-02-19 05:58:19,436 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:24,572 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:29,337 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:34,379 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:39,335 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:44,340 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-6) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:49,337 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:54,327 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:59,328 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:04,331 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:09,338 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:14,360 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-4) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:19,324 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:00:23,074 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-6) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:01:23,074 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:01:28,658 INFO [org.ovirt.engine.core.bll.DbUserCacheManager] (DefaultQuartzScheduler_Worker-58) Start refreshing all users data 2014-02-19 06:01:28,704 INFO [org.ovirt.engine.core.bll.OvfDataUpdater] (DefaultQuartzScheduler_Worker-90) Attempting to update VMs/Templates Ovf. 2014-02-19 06:02:24,109 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:03:25,164 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:04:25,083 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:05:25,056 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-5) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:06:25,080 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-6) ovirt ISOs directory
Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19)
Hi, It seems that it's not related to the bug that you mentioned. Can you please answer what I asked (about how did you add the host)? Also, please try SSH from the engine to the host - is it working? - Original Message - From: Udaya Kiran P ukiran...@yahoo.in To: Nir Soffer nsof...@redhat.com, mbour...@redhat.com, Itamar Heim ih...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, February 19, 2014 1:26:15 PM Subject: Re: [Users] Host installation failed. SSH session closed during connection (ovirt-node-iso-3.0.3-1.1.fc19) Hi All, I have disabled the selinux by setenforce 0. Not sure if its related to the bug apache-sshd downgrading mentioned in - https://bugzilla.redhat.com/show_bug.cgi?id=1021273 Below are the errors logged in engine.log. Appreciate your help. 2014-02-19 05:06:45,232 INFO [org.ovirt.engine.core.register.RegisterServlet] (ajp--127.0.0.1-8702-7) [1cb2fef] Succeeded to run RegisterVds. 2014-02-19 05:58:01,374 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:04,397 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:09,433 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:14,428 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:14,909 ERROR [org.ovirt.engine.core.bll.GetServerSSHKeyFingerprintQuery] (ajp--127.0.0.1-8702-11) Could not fetch fingerprint of host 10.10.155.240 with message: IOException: SSH session closed during connection '10.10.155.240' 2014-02-19 05:58:19,436 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-11) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:24,572 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:29,337 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:34,379 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:39,335 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:44,340 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-6) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:49,337 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:54,327 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:58:59,328 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:04,331 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:09,338 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:14,360 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-4) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 05:59:19,324 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:00:23,074 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-6) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:01:23,074 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-7) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:01:28,658 INFO [org.ovirt.engine.core.bll.DbUserCacheManager] (DefaultQuartzScheduler_Worker-58) Start refreshing all users data 2014-02-19 06:01:28,704 INFO [org.ovirt.engine.core.bll.OvfDataUpdater] (DefaultQuartzScheduler_Worker-90) Attempting to update VMs/Templates Ovf. 2014-02-19 06:02:24,109 ERROR [org.ovirt.engine.core.bll.GetoVirtISOsQuery] (ajp--127.0.0.1-8702-8) ovirt ISOs directory not found. Search in: /usr/share/ovirt-node-iso 2014-02-19 06:03:25,164 ERROR
Re: [Users] new oVirt look-and-feel -- feature page
- Original Message -
From: Karli Sjöberg karli.sjob...@slu.se
To: gsher...@redhat.com
Cc: users@ovirt.org, a...@ovirt.org
Sent: Wednesday, February 19, 2014 1:43:43 AM
Subject: Re: [Users] new oVirt look-and-feel -- feature page
On Tue, 2014-02-18 at 16:19 -0500, Greg Sheremeta wrote:
Hi,
Please check out the feature page for the new oVirt look-and-feel,
PatternFly based:
http://www.ovirt.org/Features/NewLookAndFeelPatternFlyPhase1.
Comments are welcome.
Thanks,
Greg
Greg Sheremeta
Red Hat, Inc.
Sr. Software Engineer, RHEV
Cell: 919-807-1086
gsher...@redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Looks really nice! Is the background canvas vectorized? Isn´t it going
to become rather slow loading such a big picture otherwise... And how is
it going to handle scaling of browser windows? How´d it look on smaller
resolutions e.g 960x640?
--
Med Vänliga Hälsningar
---
Karli Sjöberg
Swedish University of Agricultural Sciences Box 7079 (Visiting Address
Kronåsvägen 8)
S-750 07 Uppsala, Sweden
Phone: +46-(0)18-67 15 66
karli.sjob...@slu.se
It's not vectorized. It's a PNG, size is 248.0 kB ... which isn't horrible.
After the first load, it'll be stored in browser cache.
It's set to scale in such a way that the aspect ratio is maintained. It uses
the CSS3 property background-size to achieve this. I think it looks pretty
perfect at any resolution.
Here's the full CSS for it:
.obrand_loginPageBackground {
background-image: url(images/ovirt_bg.png);
background-size: 100% auto;
background-repeat: repeat-x;
background-color: #1d2226;
position: absolute;
bottom: 0;
left: 0;
right: 0;
top: 0;
}
Thanks!
Greg
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Nodes lose storage at random
Nir, Messages: https://t-x.dignus.nl/messages.txt Sanlock: https://t-x.dignus.nl/sanlock.log.txt Any input is more than welcome! On Wed, Feb 19, 2014 at 10:38 AM, Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Johan Kooijman m...@johankooijman.com To: users users@ovirt.org Sent: Tuesday, February 18, 2014 1:32:56 PM Subject: [Users] Nodes lose storage at random Hi All, We're seeing some weird issues in our ovirt setup. We have 4 nodes connected and an NFS (v3) filestore (FreeBSD/ZFS). Once in a while, it seems at random, a node loses their connection to storage, recovers it a minute later. The other nodes usually don't lose their storage at that moment. Just one, or two at a time. We've setup extra tooling to verify the storage performance at those moments and the availability for other systems. It's always online, just the nodes don't think so. In the logs, we see that vdsm was restarted: MainThread::DEBUG::2014-02-18 10:48:35,809::vdsm::45::vds::(sigtermHandler) Received signal 15 But we don't know why it happened. Please attach also /var/log/messages and /var/log/sanlock.log around the time that vdsm was restarted. Thanks, Nir -- Met vriendelijke groeten / With kind regards, Johan Kooijman T +31(0) 6 43 44 45 27 F +31(0) 162 82 00 01 E m...@johankooijman.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] [ANN] engine-manage-domains arguments changed in oVirt 3.4 beta3
Hi, please be aware that in oVirt 3.4 beta3 engine-manage-domains command line arguments changed from Java type (-someOption) to standard long type (--some-option). Consult man page or run engine-manage-domains --help to find out differences. Thanks Martin Perina ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] [ANN] oVirt 3.4.0 beta3 is now available
The oVirt team is pleased to announce that the 3.4.0 third beta release is now available for testing. Release notes and information on the changes for this update are still being worked on and will be available soon on the wiki[1]. Please ensure to follow install instruction from release notes if you're going to test it. The existing repository ovirt-3.4.0-prerelease has been updated for delivering this beta and future refreshes until release candidate. A new oVirt Node build will be available soon as well. You're welcome to join us testing this beta release before we'll compose RC build for next week test day [2] scheduled for 2014-02-27! [1] http://www.ovirt.org/OVirt_3.4.0_release_notes [2] http://www.ovirt.org/OVirt_3.4_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage Performance Issue !
Just as a quick shot:
You really may want to check which IO scheduler runs inside the
vm. you probably want deadline or noop instead of CFQ, which
can have a huge performance impact inside the vms.
you can check the default scheduler with:
dmesg | grep scheduler
you should get an output similar to this:
[0.841989] io scheduler noop registered
[0.841990] io scheduler deadline registered (default)
[0.842028] io scheduler cfq registered
HTH
Am 19.02.2014 12:15, schrieb Itamar Heim:
On 02/19/2014 10:48 AM, Dafna Ron wrote:
Actually, I meant how is the network configured rhevm side?
are all vm's writing on rhevm interface?
Itamar, Should local storage be used this way in rhevm?
I see no issue using ovirt to manage standalone hosts with their local
storage.
network isn't a factor in this case.
how many spindles on the host? what is the load on the disks you see at
host level? which vdisk type are you using (ide/virtio-block/virtio-scsi)?
On 02/19/2014 03:56 AM, Vishvendra Singh Chauhan wrote:
Hi,
My network is 1 Gigabit. And i am using my each node in a separate
cluster/DC.
And memory and processor uses are very low. Means when i run 30 vms
then it's processor uses is 45% and memory uses is 35% around.
On Tue, Feb 18, 2014 at 2:14 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com wrote:
what is the network configuration? are you using each host with
it's own cluster/DC as a local storage host?
how many hosts are we talking about? what is the memory/cpu
consumption on the hosts?
On 02/18/2014 01:18 AM, Vishvendra Singh Chauhan wrote:
Thanks Dafna,
I am Using Dell server Just as node, My manager is running on
other machine. On each node we have 40 vm's running. and all
most vm's has RHEL6 os. Now the problem about performance of
vm's, when client is writing the data in vm, they are
reporting, that they have very slow speed to write the data.
I also feel slow performance at writing speed in the vm's, So
now please suggest, is any way to improve the writing speed in
virtual machine's ?.
On Mon, Feb 17, 2014 at 2:40 PM, Dafna Ron d...@redhat.com
mailto:d...@redhat.com mailto:d...@redhat.com
mailto:d...@redhat.com wrote:
please give more information.
what do you mean by storage performance?
how many vm's are you running?
are you using the Dell as just a host or is engine also
installed
on it?
On 02/17/2014 03:26 AM, Vishvendra Singh Chauhan wrote:
Hello Group,
Please help me out in storage issue in ovirt.
I am using Dell PowerEdge XD 720 servers, as node in
Ovirt.
Every node has 24TB storage space, so i am using all
this
space as the local storage in that.. But still i am
facing the
problem in storgae performance. My guests os are very
slow to
write the data.
So please give me, some tips using them i can increase
the
performance in storage.
-- /*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
___
Users mailing list
Users@ovirt.org mailto:Users@ovirt.org
mailto:Users@ovirt.org mailto:Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
-- Dafna Ron
-- /*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
-- Dafna Ron
--
/*Thanks and Regards.*/
/*Vishvendra Singh Chauhan*/
/*(*//*RHC{SA,E,SS,VA}CC{NA,NP})*/
/*+91-9711460593
*/
http://linux-links.blogspot.in/
God First Work Hard Success is Sure...
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] new oVirt look-and-feel -- feature page
On Wed, 2014-02-19 at 07:22 -0500, Greg Sheremeta wrote:
- Original Message -
From: Karli Sjöberg karli.sjob...@slu.se
To: gsher...@redhat.com
Cc: users@ovirt.org, a...@ovirt.org
Sent: Wednesday, February 19, 2014 1:43:43 AM
Subject: Re: [Users] new oVirt look-and-feel -- feature page
On Tue, 2014-02-18 at 16:19 -0500, Greg Sheremeta wrote:
Hi,
Please check out the feature page for the new oVirt look-and-feel,
PatternFly based:
http://www.ovirt.org/Features/NewLookAndFeelPatternFlyPhase1.
Comments are welcome.
Thanks,
Greg
Greg Sheremeta
Red Hat, Inc.
Sr. Software Engineer, RHEV
Cell: 919-807-1086
gsher...@redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Looks really nice! Is the background canvas vectorized? Isn´t it going
to become rather slow loading such a big picture otherwise... And how is
it going to handle scaling of browser windows? How´d it look on smaller
resolutions e.g 960x640?
--
Med Vänliga Hälsningar
---
Karli Sjöberg
Swedish University of Agricultural Sciences Box 7079 (Visiting Address
Kronåsvägen 8)
S-750 07 Uppsala, Sweden
Phone: +46-(0)18-67 15 66
karli.sjob...@slu.se
It's not vectorized. It's a PNG, size is 248.0 kB ... which isn't horrible.
After the first load, it'll be stored in browser cache.
It's set to scale in such a way that the aspect ratio is maintained. It uses
the CSS3 property background-size to achieve this. I think it looks pretty
perfect at any resolution.
Here's the full CSS for it:
.obrand_loginPageBackground {
background-image: url(images/ovirt_bg.png);
background-size: 100% auto;
background-repeat: repeat-x;
background-color: #1d2226;
position: absolute;
bottom: 0;
left: 0;
right: 0;
top: 0;
}
Thanks!
Greg
Yupp, just checking, since it´s not made to tile like a parallax, I was
just curious if you had some special trick up your sleave.
And maybe I´m just nit-picking here, but I made a quick test, just to
demonstrate what I would percieve as a problem of having one big picture
as background.
obrand.html:
html
head
link rel=stylesheet href=obrand.css /
/head
body class=obrand_loginPageBackground/body
/html
obrand.css:
.obrand_loginPageBackground {
background-image: url(ovirt_bg.png);
background-size: 100% auto;
background-repeat: repeat-x;
background-color: #1d2226;
position: absolute;
bottom: 0;
left: 0;
right: 0;
top: 0;
}
I attached a snapshot of how scaling your browser window in the wrong
way breaks it´s aspect ratio and how that´s just handled by
background-color in a rather...boring way. Of course scaling the
window _that_ small is ridiculous, it´s just to demonstrate the aspect
issue that would be for smartphones e.g, on this welcome screen.
So my concern here is most of all about the aspect ratio issues involved
with having just one big picture as a background. Most sites I´ve seen
have either just code, a lot of small pics, parallaxing ones, or one
insanely big picture, talking Ultra-HD 4k big, just to be absolutely
sure it´s not going to scale in this unwanted way.
Am I wrong?
--
Med Vänliga Hälsningar
---
Karli Sjöberg
Swedish University of Agricultural Sciences Box 7079 (Visiting Address
Kronåsvägen 8)
S-750 07 Uppsala, Sweden
Phone: +46-(0)18-67 15 66
karli.sjob...@slu.se
attachment: Screenshot.png___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Asking for advice on hosted engine
2014-02-18 23:25 GMT+01:00 Ted Miller tmil...@hcjb.org: Giorgio, Gluster on two hosts only is not a good idea. Installed for high reliability (quorum activated), gluster requires that 50% of the nodes be working before anything can be written. When you have only two nodes, that means both nodes must be up before anything can happen. You can turn off quorum, but then you are almost guaranteeing yourself a split-brain headache the first time communication between the two hosts is interrupted, even briefly (been there, done that). Ovirt is constantly writing to the storage, so if they are not communicating you WILL get different things written to the same files in both servers, especially the sanlock files. This is called split-brain, and it will give you a splitting headache. For replicated gluster to work well, you need a minimum of three gluster nodes in replica mode. Two nodes is a recipe for unhappiness. It is either low-availability (quorum on) or a split-brain waiting to spring on you (quorum off). You don't want either one. Hi Ted, thank you for your precious suggestion. I was already aware of these two problems. This setup works if I leave quorum off. I didn't fear split-brain because - in theory - as the communication path between the two hosts is fully redundant, it can't happen: multiple interfaces on different nics connected to multiple switches having redundant power supply. Moreover, I'm using this setup exclusively as a storage backend for the engine VM, nothing else. So - in theory - there is a single VM/host writing at a time. Maybe not exactly this way during the migration of the HostedEngine VM from one host to another. Maybe in that transition there are concurrent write operations from the two hosts. But usually not. Now sanlock worries me more. I wasn't considering how sanlock works (to be honest, I was totally unaware of its operating mode). Maybe this could be the most probable cause of conflicts. Figure out how to use some storage on some third computer to provide a third gluster node. That way only two of the three have to be working for things to keep working. Ted Miller Elkhart, IN In the beginning I tought of having replication on three (or four) bricks, for other reasons. But then I was worried about the performance of a system where every write operation has to be replicated on more than another single brick. This was just an hypotesis by me. Do you have any figure about write performance in this situation? I have found none (probably my fault). Anyway thank you very much for your suggestion, I think I'll go down your way. Better safe than sorry. Best regards, Giorgio. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Fwd: Sample code for setting NIC - CloudInit
Hi, Can someone share me sample java code for assigning IP address for VM on eth0 through Java SDK via CloudInit ? *Something Like this but in Java:* network_configuration nics nic nameeth0/name boot_protocolSTATIC/boot_protocol network ip address=192.168.2.11 netmask=255.255.0.0 gateway=192.168.2.1 / /network on_boottrue/on_boot /nic nic nameeth1/name boot_protocolDHCP/boot_protocol /nic nic nameeth2/name boot_protocolNONE/boot_protocol on_boottrue/on_boot /nic /nics dns servers host address1.1.2.2/address /host host address1.2.3.4/address /host /servers search_domains host addressqa.lab/address /host host addressgoogle.com/address /host /search_domains /dns /network_configuration -- Thanks Regards Tejesh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage Performance Issue !
On Wed, Feb 19, 2014 at 1:45 PM, Sven Kieske wrote: Just as a quick shot: You really may want to check which IO scheduler runs inside the vm. you probably want deadline or noop instead of CFQ, which can have a huge performance impact inside the vms. BTW: actually I'm already doing it (setting scheduler as deadline) at hypervisor level for my oVirt hosts, even if it seems to me it is not the default... What do you think about it? This way a single process (aka vm) cannot have such huge performance impact and you have nothing to do at VM level... Even in recent fedora (19) I see some situations where cfq is suboptimal in case of heavy I/O operations... Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [rhevm-api] Sample code for setting NIC - CloudInit
On 02/19/2014 03:00 PM, Tejesh M wrote: Hi, Can someone share me sample code for assigning IP address for VM on eth0 through Java SDK via CloudInit ? -- Thanks Regards Tejesh ___ rhevm-api mailing list rhevm-...@lists.fedorahosted.org https://lists.fedorahosted.org/mailman/listinfo/rhevm-api reminder, please use users@ovirt.org for these questions ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API read-only access / roles
Hi, reiterating on this somewhat old mail: Is there a read only user integrated in 3.4? Because it's a huge overhead to install somewhere e.g. a freeipa server just to get read only access. Am 21.11.2013 09:52, schrieb Sander Grendelman: Hi Doron, The user I've defined in [1] works for me. A built-in login-/read-only role would be nice, but it's quite easy to define a custom role so more of a nice-to-have instead of a must-have. Thanks for asking! Sander. On Wed, Nov 20, 2013 at 5:40 PM, Doron Fediuck dfedi...@redhat.com wrote: Hi Sander, We're closing the ovirt 3.4 scope, and wondering if you're handling Zabbix based on [1]. If so please let me know and I'll update the 3.4 features list. Thanks, Doron [1] http://lists.ovirt.org/pipermail/users/2013-November/017946.html -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] API read-only access / roles
I just looked into my test vm with the 3.4 beta and I can't see such an user there. I created an RFE at: https://bugzilla.redhat.com/show_bug.cgi?id=1067036 I really hope this can get included in 3.4 (I know it's late) as it should be a very very minor change at engine-setup. Thanks Am 19.02.2014 14:55, schrieb Sven Kieske: Hi, reiterating on this somewhat old mail: Is there a read only user integrated in 3.4? Because it's a huge overhead to install somewhere e.g. a freeipa server just to get read only access. Am 21.11.2013 09:52, schrieb Sander Grendelman: Hi Doron, The user I've defined in [1] works for me. A built-in login-/read-only role would be nice, but it's quite easy to define a custom role so more of a nice-to-have instead of a must-have. Thanks for asking! Sander. On Wed, Nov 20, 2013 at 5:40 PM, Doron Fediuck dfedi...@redhat.com wrote: Hi Sander, We're closing the ovirt 3.4 scope, and wondering if you're handling Zabbix based on [1]. If so please let me know and I'll update the 3.4 features list. Thanks, Doron [1] http://lists.ovirt.org/pipermail/users/2013-November/017946.html -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt 3.3.2 Cannot attach POSIX (gluster) storage domain
Hi Nir, I have a thread open on the gluster side about heal-failed operations, so I'll wait for a response on that side. Agreed on two node quorum, I'm waiting for a 3rd node right now :) But in the meantime or for anyone who reads this thread, if you only have 2 storage nodes you have to weigh the risks of 2 nodes in quorum ensuring storage consistency, or 2 nodes no quorum with an extra shot at uptime. *Steve Dainard * IT Infrastructure Manager Miovision http://miovision.com/ | *Rethink Traffic* *Blog http://miovision.com/blog | **LinkedIn https://www.linkedin.com/company/miovision-technologies | Twitter https://twitter.com/miovision | Facebook https://www.facebook.com/miovision* -- Miovision Technologies Inc. | 148 Manitou Drive, Suite 101, Kitchener, ON, Canada | N2C 1L3 This e-mail may contain information that is privileged or confidential. If you are not the intended recipient, please delete the e-mail and any attachments and notify us immediately. On Wed, Feb 19, 2014 at 4:13 AM, Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Steve Dainard sdain...@miovision.com To: Nir Soffer nsof...@redhat.com Cc: users users@ovirt.org Sent: Tuesday, February 11, 2014 7:42:37 PM Subject: Re: [Users] Ovirt 3.3.2 Cannot attach POSIX (gluster) storage domain Enabled logging, logs attached. According to sanlock and gluster log: 1. on the host, sanlock is failing write to the ids volume 2. on the gluster side we see failure to heal the ids file. This looks like glusterfs issue, and should be handled by glusterfs folks. You probably should configure sanlock log level back to the default by commenting out the configuration I suggested in the previous mail. According to gluster configuration in this log, this looks like 2 replicas with auto quorum. This setup is not recommended because both machines must be up all the time. When one machine is down, your entire storage is down. Check this post explaining this issue: http://lists.ovirt.org/pipermail/users/2014-February/021541.html Thanks, Nir ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt Weekly Meeting Minutes -- 2014-02-19
Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-19-15.10.html Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-19-15.10.txt Log: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-19-15.10.log.html = #ovirt: oVirt Weekly Sync = Meeting started by doron at 15:10:44 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-19-15.10.log.html . Meeting summary --- * Agenda and roll Call (doron, 15:11:00) * infra update (doron, 15:11:01) * 3.3 update releases (doron, 15:11:03) * 3.4 progress (doron, 15:11:04) * conferences and workshops (doron, 15:11:06) * other topics (doron, 15:11:07) * infra update (doron, 15:11:09) * infra meeting summay: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-17-15.11.html (doron, 15:14:59) * 3.3 releases update (doron, 15:15:55) * no blockers for 3.3.4. currently on track. 3.3.4 will have a node iso respin and probably a dwh respin (doron, 15:20:23) * 3.4 progress (doron, 15:21:35) * 3.4.0 beta 3 announced today. RC postponed by one week, test day too. (doron, 15:22:10) * ACTION: sbonazzo to mail devel list and blocker assignees asking for ETA. (doron, 15:28:42) * open 3.4 blockers: http://alturl.com/ie3wk (doron, 15:30:29) * Gluster have no 3.4 updates. (doron, 15:31:52) * infra 3.4 updates: snmp in master. Currently being ported to 3.4. (doron, 15:34:09) * integration 3.4 updates: still working on closing bugs and busy with releases composition. (doron, 15:36:18) * network 3.4 updates: two blockers opened today, already fixes pending review. Should make it into RC. (doron, 15:38:34) * sla 3.4 updates: hosted engine maintenance vdsm part ready. engine being handled and should make it to RC. (doron, 15:41:21) * UX 3.4 updates: 2 issues currently being handled. Should be fixed for RC. (doron, 15:45:59) * storage 3.4 updates: ovf on any domain and remove sp md at risk of missing 3.4. To be tracked. (doron, 15:47:58) * no virt representative. Please update on list on 3.4 status. (doron, 15:49:38) * no PPC representative. Please update on list on 3.4 status. (doron, 15:50:24) * vdsm master branch demonstrating SSL issues such as unexplayed connected resets and Vdsm completely unresponsive, when running with ssl=True. Please update ASAP if you see in 3.4 as well. (doron, 15:55:33) * PPF 3.4 updates: patches blocking missing features in ppc64 (suspend, migration and memory snapshots) are still without enough reviews. Help needed to review it. (doron, 15:59:37) * PPC 3.4 updates: patches blocking missing features in ppc64 (suspend, migration and memory snapshots) are still without enough reviews. Help needed to review it. (doron, 15:59:47) * conferences and workshops (doron, 16:00:23) * SCALE is this week. bkp will be speaking at Infrastructure.Next. ecohen will also be in attendance, helping with the booth. (doron, 16:01:28) * list of events for 2nd half of 2014 available here: http://goo.gl/qFHaQh (doron, 16:02:19) * OpenStack day was yesterday in Korea, we had and ovirt integration session there. (doron, 16:03:31) * lots and lots of tweets around ovirt. Feel free to follow @ovirt and help responding (doron, 16:04:05) * other topics (doron, 16:04:42) * ovirt.org being worked on by bkp dneary and abonas. Should be ready for 3.4 GA. (doron, 16:06:38) * Quick Start Guide is updated to 3.3. Please review! (doron, 16:07:03) * LINK: http://www.ovirt.org/Quick_Start_Guide (bkp, 16:08:30) * please review the updated http://www.ovirt.org/Quick_Start_Guide (doron, 16:08:52) Meeting ended at 16:10:42 UTC. Action Items * sbonazzo to mail devel list and blocker assignees asking for ETA. Action Items, by person --- * sbonazzo * sbonazzo to mail devel list and blocker assignees asking for ETA. * **UNASSIGNED** * (none) People Present (lines said) --- * doron (133) * sbonazzo (21) * bkp (17) * danken (13) * ecohen (10) * ybronhei (9) * amureini (7) * dcaro (6) * lvernia (5) * vitorlima (4) * dneary (3) * gtemple (2) * orc_orc (2) * itamar (2) * ovirtbot (2) * lbianc (2) * abonas (1) * Mossel (1) * sahina (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SD Disk's Logical Volume not visible/activated on some nodes
Hello, On 19.2.2014, 17:09, Nir Soffer wrote: - Original Message - From: Boyan Tabakov bl...@alslayer.net To: users@ovirt.org Sent: Tuesday, February 18, 2014 3:34:49 PM Subject: [Users] SD Disk's Logical Volume not visible/activated on some nodes Hello, I have ovirt 3.3 installed on on FC 19 hosts with vdsm 4.13.3-2.fc19. Which version of ovirt 3.3 is this? (3.3.2? 3.3.3?) ovirt-engine is 3.3.2-1.fc19 One of the hosts (host1) is engine + node + SPM and the other host2 is just a node. I have an iSCSI storage domain configured and accessible from both nodes. When creating a new disk in the SD, the underlying logical volume gets properly created (seen in vgdisplay output on host1), but doesn't seem to be automatically picked by host2. How do you know it is not seen on host2? It's not present in the output of vgdisplay -v nor vgs. Consequently, when creating/booting a VM with the said disk attached, the VM fails to start on host2, because host2 can't see the LV. Similarly, if the VM is started on host1, it fails to migrate to host2. Extract from host2 log is in the end. The LV in question is 6b35673e-7062-4716-a6c8-d5bf72fe3280. As far as I could track quickly the vdsm code, there is only call to lvs and not to lvscan or lvchange so the host2 LVM doesn't fully refresh. The only workaround so far has been to restart VDSM on host2, which makes it refresh all LVM data properly. When is host2 supposed to pick up any newly created LVs in the SD VG? Any suggestions where the problem might be? When you create a new lv on the shared storage, the new lv should be visible on the other host. Lets start by verifying that you do see the new lv after a disk was created. Try this: 1. Create a new disk, and check the disk uuid in the engine ui 2. On another machine, run this command: lvs -o vg_name,lv_name,tags You can identify the new lv using tags, which should contain the new disk uuid. If you don't see the new lv from the other host, please provide /var/log/messages and /var/log/sanlock.log. Just tried that. The disk is not visible on the non-SPM node. On the SPM node (where the LV is visible in vgs output): Feb 19 19:10:43 host1 vdsm root WARNING File: /rhev/data-center/61f15cc0-8bba-482d-8a81-cd636a581b58/3307f6fa-dd58-43db-ab23-b1fb299006c7/images/4d15543c-4c45-4c23-bbe3-f10b9084472a/3e0ce8cb-3740-49d7-908e-d025875ac9a2 already removed Feb 19 19:10:45 host1 multipathd: dm-65: remove map (uevent) Feb 19 19:10:45 host1 multipathd: dm-65: devmap not registered, can't remove Feb 19 19:10:45 host1 multipathd: dm-65: remove map (uevent) Feb 19 19:10:54 host1 kernel: [1652684.864746] dd: sending ioctl 80306d02 to a partition! Feb 19 19:10:54 host1 kernel: [1652684.963931] dd: sending ioctl 80306d02 to a partition! No recent entries in sanlock.log on the SPM node. On the non-SPM node (the one that doesn't show the LV in vgs output), there are no relevant entries in /var/log/messages. Here's the full sanlock.log for that host: 2014-01-30 16:28:09+0200 1324 [2335]: sanlock daemon started 2.8 host 18bd0a27-c280-4007-98f2-d2e7e73cd8b5.xenon.futu 2014-01-30 16:59:51+0200 5 [609]: sanlock daemon started 2.8 host 4a7627e2-296a-4e48-a7e2-f6bcecac07ab.xenon.futu 2014-01-31 09:51:43+0200 60717 [614]: s1 lockspace 3307f6fa-dd58-43db-ab23-b1fb299006c7:2:/dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/ids:0 2014-01-31 16:03:51+0200 83045 [613]: s1:r1 resource 3307f6fa-dd58-43db-ab23-b1fb299006c7:SDM:/dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/leases:1048576 for 8,16,30268 2014-01-31 16:18:01+0200 83896 [614]: s1:r2 resource 3307f6fa-dd58-43db-ab23-b1fb299006c7:SDM:/dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/leases:1048576 for 8,16,30268 2014-02-06 05:24:10+0200 563065 [31453]: 3307f6fa aio timeout 0 0x7fc37c0008c0:0x7fc37c0008d0:0x7fc391f5f000 ioto 10 to_count 1 2014-02-06 05:24:10+0200 563065 [31453]: s1 delta_renew read rv -202 offset 0 /dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/ids 2014-02-06 05:24:10+0200 563065 [31453]: s1 renewal error -202 delta_length 10 last_success 563034 2014-02-06 05:24:21+0200 563076 [31453]: 3307f6fa aio timeout 0 0x7fc37c000910:0x7fc37c000920:0x7fc391d5c000 ioto 10 to_count 2 2014-02-06 05:24:21+0200 563076 [31453]: s1 delta_renew read rv -202 offset 0 /dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/ids 2014-02-06 05:24:21+0200 563076 [31453]: s1 renewal error -202 delta_length 11 last_success 563034 2014-02-06 05:24:32+0200 563087 [31453]: 3307f6fa aio timeout 0 0x7fc37c000960:0x7fc37c000970:0x7fc391c5a000 ioto 10 to_count 3 2014-02-06 05:24:32+0200 563087 [31453]: s1 delta_renew read rv -202 offset 0 /dev/3307f6fa-dd58-43db-ab23-b1fb299006c7/ids 2014-02-06 05:24:32+0200 563087 [31453]: s1 renewal error -202 delta_length 11 last_success 563034 2014-02-06 05:24:40+0200 563094 [609]: s1 check_our_lease warning 60 last_success 563034 2014-02-06 05:24:41+0200 563095 [609]: s1 check_our_lease warning 61 last_success 563034 2014-02-06
Re: [Users] Live migration of VM's occasionally fails
Thanks Steve! I am still perplexed how come one out of two identical vm's would fail migration... logic states that they should both fail. On 02/19/2014 06:29 PM, Steve Dainard wrote: I added another vlan on both hosts, and designated it a migration network. Still the same issue, failed to migrate one of the two VM's. I then deleted a failed posix domain on another gluster volume with some heal tasks pending, with no hosts attached to it, and the VM's migrated successfully. Perhaps gluster isn't passing storage errors up properly for non-dependent volumes. Anyways this is solved for now, just wanted this here for posterity. *Steve Dainard * IT Infrastructure Manager Miovision http://miovision.com/ | /Rethink Traffic/ *Blog http://miovision.com/blog | **LinkedIn https://www.linkedin.com/company/miovision-technologies | Twitter https://twitter.com/miovision | Facebook https://www.facebook.com/miovision* Miovision Technologies Inc. | 148 Manitou Drive, Suite 101, Kitchener, ON, Canada | N2C 1L3 This e-mail may contain information that is privileged or confidential. If you are not the intended recipient, please delete the e-mail and any attachments and notify us immediately. On Tue, Feb 18, 2014 at 5:00 PM, Steve Dainard sdain...@miovision.com mailto:sdain...@miovision.com wrote: sanlock.log on the second host (ovirt002) doesn't have any entries anywhere near that time of failure. I see some heal-failed errors in gluster, but seeing as the storage is exposed via NFS I'm surprised to think this might be the issue. I'm working on fixing those files now, I'll update if I make any progress. *Steve Dainard * IT Infrastructure Manager Miovision http://miovision.com/ | /Rethink Traffic/ *Blog http://miovision.com/blog | **LinkedIn https://www.linkedin.com/company/miovision-technologies | Twitter https://twitter.com/miovision | Facebook https://www.facebook.com/miovision* Miovision Technologies Inc. | 148 Manitou Drive, Suite 101, Kitchener, ON, Canada | N2C 1L3 This e-mail may contain information that is privileged or confidential. If you are not the intended recipient, please delete the e-mail and any attachments and notify us immediately. On Mon, Feb 17, 2014 at 5:32 PM, Dafna Ron d...@redhat.com mailto:d...@redhat.com wrote: really interesting case :) maybe gluster related? Elad, can you please try to reproduce this? gluster storage - at least two vm's server type created from template as thin provision (it's clone copy). after create run and migrate all vm's from one host to the second host. I think it would be a locking issue. Steve, can you please also check the sanlock log in the second host + look if there are any errors in the gluster logs (on both hosts)? Thanks, Dafna On 02/17/2014 06:52 PM, Steve Dainard wrote: VM's are identical, same template, same cpu/mem/nic. Server type, thin provisioned on NFS (backend is glusterfs 3.4). Does monitor = spice console? I don't believe either of them had a spice connection. I don't see anything in the ovirt001 sanlock.log: 2014-02-14 11:16:05-0500 255246 [5111]: cmd_inq_lockspace 4,14 a52938f7-2cf4-4771-acb2-0c78d14999e5:1:/rhev/data-center/mnt/gluster-store-vip:_rep1/a52938f7-2cf4-4771-acb2-0c78d14999e5/dom_md/ids:0 flags 0 2014-02-14 11:16:05-0500 255246 [5111]: cmd_inq_lockspace 4,14 done 0 2014-02-14 11:16:15-0500 255256 [5110]: cmd_inq_lockspace 4,14 a52938f7-2cf4-4771-acb2-0c78d14999e5:1:/rhev/data-center/mnt/gluster-store-vip:_rep1/a52938f7-2cf4-4771-acb2-0c78d14999e5/dom_md/ids:0 flags 0 2014-02-14 11:16:15-0500 255256 [5110]: cmd_inq_lockspace 4,14 done 0 2014-02-14 11:16:25-0500 255266 [5111]: cmd_inq_lockspace 4,14 a52938f7-2cf4-4771-acb2-0c78d14999e5:1:/rhev/data-center/mnt/gluster-store-vip:_rep1/a52938f7-2cf4-4771-acb2-0c78d14999e5/dom_md/ids:0 flags 0 2014-02-14 11:16:25-0500 255266 [5111]: cmd_inq_lockspace 4,14 done 0 2014-02-14 11:16:36-0500 255276 [5110]: cmd_inq_lockspace 4,14 a52938f7-2cf4-4771-acb2-0c78d14999e5:1:/rhev/data-center/mnt/gluster-store-vip:_rep1/a52938f7-2cf4-4771-acb2-0c78d14999e5/dom_md/ids:0 flags 0 2014-02-14 11:16:36-0500 255276 [5110]: cmd_inq_lockspace 4,14 done 0 2014-02-14 11:16:46-0500 255286 [5111]: cmd_inq_lockspace 4,14
[Users] Help required: Selinux disable for ovirt iso image
I apologize if this comes off a little brusque, but there's really a lot of random information out there right now, to the point where i've seen it confuse not only myself but other new installers. Based on the problems I still have, I have a suggestion, and I also need some help. Again, some of this may come off as a bit of a TLDR Rant but if ovirt is to become popular, I believe my experience as a hardware engineer, software/hardware QA director/manager/engineer, may be valuable to this project. Two things keep me from getting this system working for me in a useful manner: #1, and the most important blocker: Disabling or fixing selinux, using ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. #2, getting raritan pdu support For issue #1: I've had a lot of people say disable selinux or fix selinux all over this user list and in recent replies. This really isn't fully helpful information. Even stating edit the /etc/selinux/config or use the kernel boot command selinux=0 or read some other doc on the internet. These all apply to full fledged releases, not to the ovirt iso image. The main issue is that SSHD is not being allowed through selinux by default on this image. The right thing to do would be to fix the image and re-release it, and DELETE the broken one that is currently available. However a simple doc explaining how to persist the selinux disable or fix the SSHD problem with selinux would be the easiest solution. Others ran me down the path of edit the selinux file and persist it which didn't work, but gave no productive help on how to make it permanent. Equally I've been told to edit the grub config and add selinux=0 to the kernel, however after attempting this, adding it manually at the grub boot causes the system not to boot, and I haven't found the *right* grub.cfg file to edit and persist to keep the changes. For issue #2: I've hacked up some of the fence-agents scripts and am in the process of attempting to figure out how to compile/set up my own local copy to verify the raritan changes. Ideally the fence-agents folks would add a generic support portion, which I may actually do myself as well, allowing *any* PDU with at least the usual login/password/command/logout sequence to be used. So you see, I'm not totally useless, I'm helping here. Next suggestions: A) Compatibility list B) Cleanup of old project crap For A) For each release, I suggest there be a spreadsheet or simple document that shows which ovirt ISO images are compatible with which manager versions. There could be a wiki where people can add references to bug #s that have been found and links to their solutions. Right now there are ancient docs all over google searches that send people down paths of days of turmoil to no avail. For B) When iso images or other releases are superseded because of blocking, non-operable bugs, they should either be resolved and re-released or a clear path to making them function be documented. Once a re-release is done, the old images should be wiped out or moved to a clearly marked deprecated folder. Thats my 100 cents worth, I really do appreciate the work and effort that goes into this project, it appears to be a wonderful one, I hope to make good use of it, but the initial learning curve is a real deal breaker I'm sure for many others, especially not those willing and able to spend the time hacking at it like I have for the past week. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Help required: Selinux disable for ovirt iso image
side note ,reinstalling the nodes to resolve the selinux issue really isn't a great proposition, its time consuming, an after-the-fact method of editing the grub line and adding selinux=0 or enforcing=0 whichever it may be would be ideal. On Wed, Feb 19, 2014 at 11:05 AM, David Smith dsm...@mypchelp.com wrote: I apologize if this comes off a little brusque, but there's really a lot of random information out there right now, to the point where i've seen it confuse not only myself but other new installers. Based on the problems I still have, I have a suggestion, and I also need some help. Again, some of this may come off as a bit of a TLDR Rant but if ovirt is to become popular, I believe my experience as a hardware engineer, software/hardware QA director/manager/engineer, may be valuable to this project. Two things keep me from getting this system working for me in a useful manner: #1, and the most important blocker: Disabling or fixing selinux, using ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. #2, getting raritan pdu support For issue #1: I've had a lot of people say disable selinux or fix selinux all over this user list and in recent replies. This really isn't fully helpful information. Even stating edit the /etc/selinux/config or use the kernel boot command selinux=0 or read some other doc on the internet. These all apply to full fledged releases, not to the ovirt iso image. The main issue is that SSHD is not being allowed through selinux by default on this image. The right thing to do would be to fix the image and re-release it, and DELETE the broken one that is currently available. However a simple doc explaining how to persist the selinux disable or fix the SSHD problem with selinux would be the easiest solution. Others ran me down the path of edit the selinux file and persist it which didn't work, but gave no productive help on how to make it permanent. Equally I've been told to edit the grub config and add selinux=0 to the kernel, however after attempting this, adding it manually at the grub boot causes the system not to boot, and I haven't found the *right* grub.cfg file to edit and persist to keep the changes. For issue #2: I've hacked up some of the fence-agents scripts and am in the process of attempting to figure out how to compile/set up my own local copy to verify the raritan changes. Ideally the fence-agents folks would add a generic support portion, which I may actually do myself as well, allowing *any* PDU with at least the usual login/password/command/logout sequence to be used. So you see, I'm not totally useless, I'm helping here. Next suggestions: A) Compatibility list B) Cleanup of old project crap For A) For each release, I suggest there be a spreadsheet or simple document that shows which ovirt ISO images are compatible with which manager versions. There could be a wiki where people can add references to bug #s that have been found and links to their solutions. Right now there are ancient docs all over google searches that send people down paths of days of turmoil to no avail. For B) When iso images or other releases are superseded because of blocking, non-operable bugs, they should either be resolved and re-released or a clear path to making them function be documented. Once a re-release is done, the old images should be wiped out or moved to a clearly marked deprecated folder. Thats my 100 cents worth, I really do appreciate the work and effort that goes into this project, it appears to be a wonderful one, I hope to make good use of it, but the initial learning curve is a real deal breaker I'm sure for many others, especially not those willing and able to spend the time hacking at it like I have for the past week. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Help required: Selinux disable for ovirt iso image
I managed to dig,dig dig and have finally resolved issue #1 without reinstall steps 1. put host in maintenance mode 2, log in to host and: 2a. mount -o,rw,remount /run/initramfs/live 2b. edit /run/initramfs/live/grub2/grub.cfg and add selinux=0 to the end of the kernel line (starts with linux /vmlinuz0 2c. reboot the host 3. log in and try getenforce - selinux says disabled. 4. I tried to Activate the host and the manager returned non-operational, so I had to remove and re-add the host. Manager version: 3.3.3-2.fc19 and iso ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso On Wed, Feb 19, 2014 at 12:14 PM, David Smith dsm...@mypchelp.com wrote: side note ,reinstalling the nodes to resolve the selinux issue really isn't a great proposition, its time consuming, an after-the-fact method of editing the grub line and adding selinux=0 or enforcing=0 whichever it may be would be ideal. On Wed, Feb 19, 2014 at 11:05 AM, David Smith dsm...@mypchelp.com wrote: I apologize if this comes off a little brusque, but there's really a lot of random information out there right now, to the point where i've seen it confuse not only myself but other new installers. Based on the problems I still have, I have a suggestion, and I also need some help. Again, some of this may come off as a bit of a TLDR Rant but if ovirt is to become popular, I believe my experience as a hardware engineer, software/hardware QA director/manager/engineer, may be valuable to this project. Two things keep me from getting this system working for me in a useful manner: #1, and the most important blocker: Disabling or fixing selinux, using ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. #2, getting raritan pdu support For issue #1: I've had a lot of people say disable selinux or fix selinux all over this user list and in recent replies. This really isn't fully helpful information. Even stating edit the /etc/selinux/config or use the kernel boot command selinux=0 or read some other doc on the internet. These all apply to full fledged releases, not to the ovirt iso image. The main issue is that SSHD is not being allowed through selinux by default on this image. The right thing to do would be to fix the image and re-release it, and DELETE the broken one that is currently available. However a simple doc explaining how to persist the selinux disable or fix the SSHD problem with selinux would be the easiest solution. Others ran me down the path of edit the selinux file and persist it which didn't work, but gave no productive help on how to make it permanent. Equally I've been told to edit the grub config and add selinux=0 to the kernel, however after attempting this, adding it manually at the grub boot causes the system not to boot, and I haven't found the *right* grub.cfg file to edit and persist to keep the changes. For issue #2: I've hacked up some of the fence-agents scripts and am in the process of attempting to figure out how to compile/set up my own local copy to verify the raritan changes. Ideally the fence-agents folks would add a generic support portion, which I may actually do myself as well, allowing *any* PDU with at least the usual login/password/command/logout sequence to be used. So you see, I'm not totally useless, I'm helping here. Next suggestions: A) Compatibility list B) Cleanup of old project crap For A) For each release, I suggest there be a spreadsheet or simple document that shows which ovirt ISO images are compatible with which manager versions. There could be a wiki where people can add references to bug #s that have been found and links to their solutions. Right now there are ancient docs all over google searches that send people down paths of days of turmoil to no avail. For B) When iso images or other releases are superseded because of blocking, non-operable bugs, they should either be resolved and re-released or a clear path to making them function be documented. Once a re-release is done, the old images should be wiped out or moved to a clearly marked deprecated folder. Thats my 100 cents worth, I really do appreciate the work and effort that goes into this project, it appears to be a wonderful one, I hope to make good use of it, but the initial learning curve is a real deal breaker I'm sure for many others, especially not those willing and able to spend the time hacking at it like I have for the past week. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Help required: Selinux disable for ovirt iso image
ahh spoke too soon, now after disabling selinux, vdsm isn't loading.. host shows up, but can't assign any VMs.. On Wed, Feb 19, 2014 at 1:16 PM, David Smith dsm...@mypchelp.com wrote: I managed to dig,dig dig and have finally resolved issue #1 without reinstall steps 1. put host in maintenance mode 2, log in to host and: 2a. mount -o,rw,remount /run/initramfs/live 2b. edit /run/initramfs/live/grub2/grub.cfg and add selinux=0 to the end of the kernel line (starts with linux /vmlinuz0 2c. reboot the host 3. log in and try getenforce - selinux says disabled. 4. I tried to Activate the host and the manager returned non-operational, so I had to remove and re-add the host. Manager version: 3.3.3-2.fc19 and iso ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso On Wed, Feb 19, 2014 at 12:14 PM, David Smith dsm...@mypchelp.com wrote: side note ,reinstalling the nodes to resolve the selinux issue really isn't a great proposition, its time consuming, an after-the-fact method of editing the grub line and adding selinux=0 or enforcing=0 whichever it may be would be ideal. On Wed, Feb 19, 2014 at 11:05 AM, David Smith dsm...@mypchelp.comwrote: I apologize if this comes off a little brusque, but there's really a lot of random information out there right now, to the point where i've seen it confuse not only myself but other new installers. Based on the problems I still have, I have a suggestion, and I also need some help. Again, some of this may come off as a bit of a TLDR Rant but if ovirt is to become popular, I believe my experience as a hardware engineer, software/hardware QA director/manager/engineer, may be valuable to this project. Two things keep me from getting this system working for me in a useful manner: #1, and the most important blocker: Disabling or fixing selinux, using ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. #2, getting raritan pdu support For issue #1: I've had a lot of people say disable selinux or fix selinux all over this user list and in recent replies. This really isn't fully helpful information. Even stating edit the /etc/selinux/config or use the kernel boot command selinux=0 or read some other doc on the internet. These all apply to full fledged releases, not to the ovirt iso image. The main issue is that SSHD is not being allowed through selinux by default on this image. The right thing to do would be to fix the image and re-release it, and DELETE the broken one that is currently available. However a simple doc explaining how to persist the selinux disable or fix the SSHD problem with selinux would be the easiest solution. Others ran me down the path of edit the selinux file and persist it which didn't work, but gave no productive help on how to make it permanent. Equally I've been told to edit the grub config and add selinux=0 to the kernel, however after attempting this, adding it manually at the grub boot causes the system not to boot, and I haven't found the *right* grub.cfg file to edit and persist to keep the changes. For issue #2: I've hacked up some of the fence-agents scripts and am in the process of attempting to figure out how to compile/set up my own local copy to verify the raritan changes. Ideally the fence-agents folks would add a generic support portion, which I may actually do myself as well, allowing *any* PDU with at least the usual login/password/command/logout sequence to be used. So you see, I'm not totally useless, I'm helping here. Next suggestions: A) Compatibility list B) Cleanup of old project crap For A) For each release, I suggest there be a spreadsheet or simple document that shows which ovirt ISO images are compatible with which manager versions. There could be a wiki where people can add references to bug #s that have been found and links to their solutions. Right now there are ancient docs all over google searches that send people down paths of days of turmoil to no avail. For B) When iso images or other releases are superseded because of blocking, non-operable bugs, they should either be resolved and re-released or a clear path to making them function be documented. Once a re-release is done, the old images should be wiped out or moved to a clearly marked deprecated folder. Thats my 100 cents worth, I really do appreciate the work and effort that goes into this project, it appears to be a wonderful one, I hope to make good use of it, but the initial learning curve is a real deal breaker I'm sure for many others, especially not those willing and able to spend the time hacking at it like I have for the past week. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [ANN] engine-manage-domains arguments changed in oVirt 3.4 beta3
- Original Message - From: Martin Perina mper...@redhat.com To: users users@ovirt.org Sent: Wednesday, February 19, 2014 2:37:52 PM Subject: [Users] [ANN] engine-manage-domains arguments changed in oVirt 3.4 beta3 Hi, please be aware that in oVirt 3.4 beta3 engine-manage-domains command line arguments changed from Java type (-someOption) to standard long type (--some-option). Consult man page or run engine-manage-domains --help to find out differences. Also, the -interactive is gone , it is now implicit when you don't give a password file Thanks Martin Perina ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Help required: Selinux disable for ovirt iso image
- Original Message - From: David Smith dsm...@mypchelp.com To: users@ovirt.org Sent: Wednesday, February 19, 2014 9:05:25 PM Subject: [Users] Help required: Selinux disable for ovirt iso image I apologize if this comes off a little brusque, but there's really a lot of random information out there right now, to the point where i've seen it confuse not only myself but other new installers. Based on the problems I still have, I have a suggestion, and I also need some help. Again, some of this may come off as a bit of a TLDR Rant but if ovirt is to become popular, I believe my experience as a hardware engineer, software/hardware QA director/manager/engineer, may be valuable to this project. Two things keep me from getting this system working for me in a useful manner: #1, and the most important blocker: Disabling or fixing selinux, using ovirt-node-iso-3.0.3-1.1.vdsm.fc19.iso. #2, getting raritan pdu support For issue #1: I've had a lot of people say disable selinux or fix selinux all over this user list and in recent replies. This really isn't fully helpful information. Even stating edit the /etc/selinux/config or use the kernel boot command selinux=0 or read some other doc on the internet. These all apply to full fledged releases, not to the ovirt iso image. The main issue is that SSHD is not being allowed through selinux by default on this image. The right thing to do would be to fix the image and re-release it, and DELETE the broken one that is currently available. However a simple doc explaining how to persist the selinux disable or fix the SSHD problem with selinux would be the easiest solution. Others ran me down the path of edit the selinux file and persist it which didn't work, but gave no productive help on how to make it permanent. Equally I've been told to edit the grub config and add selinux=0 to the kernel, however after attempting this, adding it manually at the grub boot causes the system not to boot, and I haven't found the *right* grub.cfg file to edit and persist to keep the changes. For issue #2: I've hacked up some of the fence-agents scripts and am in the process of attempting to figure out how to compile/set up my own local copy to verify the raritan changes. Ideally the fence-agents folks would add a generic support portion, which I may actually do myself as well, allowing *any* PDU with at least the usual login/password/command/logout sequence to be used. So you see, I'm not totally useless, I'm helping here. Please keep updating us with the status of this, is that is targeted to integrate with the fence-agents package ? Next suggestions: A) Compatibility list B) Cleanup of old project crap For A) For each release, I suggest there be a spreadsheet or simple document that shows which ovirt ISO images are compatible with which manager versions. There could be a wiki where people can add references to bug #s that have been found and links to their solutions. Right now there are ancient docs all over google searches that send people down paths of days of turmoil to no avail. For B) When iso images or other releases are superseded because of blocking, non-operable bugs, they should either be resolved and re-released or a clear path to making them function be documented. Once a re-release is done, the old images should be wiped out or moved to a clearly marked deprecated folder. Thats my 100 cents worth, I really do appreciate the work and effort that goes into this project, it appears to be a wonderful one, I hope to make good use of it, but the initial learning curve is a real deal breaker I'm sure for many others, especially not those willing and able to spend the time hacking at it like I have for the past week. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Fwd: Sample code for setting NIC - CloudInit
- Original Message -
From: Tejesh M tejes...@gmail.com
To: users@oVirt.org users@ovirt.org
Sent: Wednesday, February 19, 2014 3:24:40 PM
Subject: [Users] Fwd: Sample code for setting NIC - CloudInit
Hi,
Can someone share me sample java code for assigning IP address for VM on eth0
through Java SDK via CloudInit ?
Hi Tejesh,
I've attached a sample code that sends the required request (as the output is
demonstrated in debug mode).
Note that the code is jdk-7 compliant.
I haven't configured cloud-init and haven't tested it end-to-end.
Please try to test it on your environment and provide a feedback for it.
Thanks,
Moti
Something Like this but in Java:
network_configuration
nics
nic
nameeth0/name
boot_protocolSTATIC/boot_protocol
network
ip address=192.168.2.11 netmask=255.255.0.0
gateway=192.168.2.1 /
/network
on_boottrue/on_boot
/nic
nic
nameeth1/name
boot_protocolDHCP/boot_protocol
/nic
nic
nameeth2/name
boot_protocolNONE/boot_protocol
on_boottrue/on_boot
/nic
/nics
dns
servers
host
address1.1.2.2/address
/host
host
address1.2.3.4/address
/host
/servers
search_domains
host
addressqa.lab/address
/host
host
address google.com /address
/host
/search_domains
/dns
/network_configuration
--
Thanks Regards
Tejesh
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
package org.ovirt.testday;
import java.io.IOException;
import java.util.Arrays;
import java.util.List;
import org.apache.http.client.ClientProtocolException;
import org.ovirt.engine.sdk.Api;
import org.ovirt.engine.sdk.decorators.VM;
import org.ovirt.engine.sdk.entities.Action;
import org.ovirt.engine.sdk.entities.CloudInit;
import org.ovirt.engine.sdk.entities.DNS;
import org.ovirt.engine.sdk.entities.Host;
import org.ovirt.engine.sdk.entities.Hosts;
import org.ovirt.engine.sdk.entities.IP;
import org.ovirt.engine.sdk.entities.Initialization;
import org.ovirt.engine.sdk.entities.NIC;
import org.ovirt.engine.sdk.entities.Network;
import org.ovirt.engine.sdk.entities.NetworkConfiguration;
import org.ovirt.engine.sdk.entities.Nics;
import org.ovirt.engine.sdk.exceptions.ServerException;
import org.ovirt.engine.sdk.exceptions.UnsecuredConnectionAttemptError;
/**
* Sample non-secured code for sending the following request:
* network_configuration
nics
nic
nameeth0/name
boot_protocolSTATIC/boot_protocol
network
ip address=192.168.2.11 netmask=255.255.0.0 gateway=192.168.2.1 /
/network
on_boottrue/on_boot
/nic
nic
nameeth1/name
boot_protocolDHCP/boot_protocol
/nic
nic
nameeth2/name
boot_protocolNONE/boot_protocol
on_boottrue/on_boot
/nic
/nics
dns
servers
host
address1.1.2.2/address
/host
host
address1.2.3.4/address
/host
/servers
search_domains
host
addressqa.lab/address
/host
host
addressgoogle.com/address
/host
/search_domains
/dns
/network_configuration
*
*/
public class VmCloudInit {
public static void main(String[] args) throws ClientProtocolException, ServerException,
UnsecuredConnectionAttemptError, IOException {
try (Api api = new Api(http://localhost:8080/api;,
admin@internal,
1,
null, null, null, null, null, null, true)){
VM vm = api.getVMs().get(vm1);
NetworkConfiguration networkConfiguration = new NetworkConfiguration();
DNS dns = new DNS();
dns.setServers(createServersList(1.1.2.2, 1.2.3.4));
dns.setSearchDomains(createServersList(qa.lab, google.com));
networkConfiguration.setDns(dns);
networkConfiguration.setNics(new Nics());
ListNIC nics = networkConfiguration.getNics().getNics();
nics.add(createNic(eth0, STATIC, createNetwork(192.168.2.11, 255.255.0.0, 192.168.2.1), true));
nics.add(createNic(eth1, DHCP, null, false));
nics.add(createNic(eth1, NONE, null, true));
vm.setInitialization(new Initialization());
Re: [Users] vmware image conversion
On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vmware image conversion
I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vmware image conversion
My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vmware image conversion
I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpris e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vmware image conversion
Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpri s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] OFFLIST: Re: vmware image conversion
So far I got my company to run oVirt in our lab. They love it so far. The nail in the coffin for vmware would be easy migration path options. Conversions are kicking my tail right now. Im looking for a way around this. https://access.redhat.com/site/solutions/235053 , which includes not having to depend on a connection to ESX -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 9:08 PM To: Maurice James Subject: OFFLIST: Re: [Users] vmware image conversion It's possible I am the real noob here. I did try it about a year ago (although I no longer recall if I was converting ESX or VBox images since I had both), in a standalone mode, and failed miserably and didn't pursue it. My hope is that it has matured and that somebody with more expertise and luck could do so successfully. We'll see how the experts weigh in. Good luck, Bob On 02/19/2014 05:59 PM, Maurice James wrote: Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpr i s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org
Re: [Users] OFFLIST: Re: vmware image conversion
FWIW some of my VMs wouldn't convert...and I had to do the dump and restore method... I know, I know...that way sucks...but it worked for the few VMs I had that didn't migrate over Thank you, Christian Hernandez 1225 Los Angeles Street Glendale, CA 91204 Phone: 877-782-2737 ext. 4566 Fax: 818-265-3152 christi...@4over.com mailto:christi...@4over.com www.4over.com http://www.4over.com On Wed, Feb 19, 2014 at 6:11 PM, Maurice James midnightst...@msn.comwrote: So far I got my company to run oVirt in our lab. They love it so far. The nail in the coffin for vmware would be easy migration path options. Conversions are kicking my tail right now. Im looking for a way around this. https://access.redhat.com/site/solutions/235053 , which includes not having to depend on a connection to ESX -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 9:08 PM To: Maurice James Subject: OFFLIST: Re: [Users] vmware image conversion It's possible I am the real noob here. I did try it about a year ago (although I no longer recall if I was converting ESX or VBox images since I had both), in a standalone mode, and failed miserably and didn't pursue it. My hope is that it has matured and that somebody with more expertise and luck could do so successfully. We'll see how the experts weigh in. Good luck, Bob On 02/19/2014 05:59 PM, Maurice James wrote: Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpr i s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare
Re: [Users] vmware image conversion
Hi, Maurice, Have you tried virt-convert to convert vmx image to virt-image(raw or qcow2) format? Which support off-line conversion without a running ESX server -Lei - Original Message - From: Maurice James midnightst...@msn.com To: Bob Doolittle b...@doolittle.us.com, Ted Miller tmil...@hcjb.org, users@ovirt.org Sent: Thursday, February 20, 2014 9:59:07 AM Subject: Re: [Users] vmware image conversion Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpri s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vmware image conversion
Or used #qemu-img convert es.vmdk imagexxx.img to finish the conversion -Lei - Original Message - From: Lei Cui l...@redhat.com To: Maurice James midnightst...@msn.com Cc: users@ovirt.org Sent: Thursday, February 20, 2014 10:49:39 AM Subject: Re: [Users] vmware image conversion Hi, Maurice, Have you tried virt-convert to convert vmx image to virt-image(raw or qcow2) format? Which support off-line conversion without a running ESX server -Lei - Original Message - From: Maurice James midnightst...@msn.com To: Bob Doolittle b...@doolittle.us.com, Ted Miller tmil...@hcjb.org, users@ovirt.org Sent: Thursday, February 20, 2014 9:59:07 AM Subject: Re: [Users] vmware image conversion Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpri s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org
Re: [Users] vmware image conversion
Trying it out now -Original Message- From: Lei Cui [mailto:l...@redhat.com] Sent: Wednesday, February 19, 2014 10:23 PM To: Maurice James Cc: users@ovirt.org Subject: Re: [Users] vmware image conversion Or used #qemu-img convert es.vmdk imagexxx.img to finish the conversion -Lei - Original Message - From: Lei Cui l...@redhat.com To: Maurice James midnightst...@msn.com Cc: users@ovirt.org Sent: Thursday, February 20, 2014 10:49:39 AM Subject: Re: [Users] vmware image conversion Hi, Maurice, Have you tried virt-convert to convert vmx image to virt-image(raw or qcow2) format? Which support off-line conversion without a running ESX server -Lei - Original Message - From: Maurice James midnightst...@msn.com To: Bob Doolittle b...@doolittle.us.com, Ted Miller tmil...@hcjb.org, users@ovirt.org Sent: Thursday, February 20, 2014 9:59:07 AM Subject: Re: [Users] vmware image conversion Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpri s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SSO from user portal to Windows 7 guest
On February 18, 2014 at 4:47 PM Itamar Heim ih...@redhat.com wrote:
On 02/18/2014 06:59 PM, SimmInfo wrote:
Yes, I make my tests from user portal.
Envoyé de mon iPad
Le 2014-02-18 à 09:14, Itamar Heim ih...@redhat.com a écrit :
On 02/18/2014 03:36 PM, SimmInfo wrote:
Ok,
I tested it on a 3.4 beta2. Build a VM (win7 32) check Guest agent as
SSO option in vm config.
Same result as the 3.3.3 engine. No sso but lock screen on spice session
termination.
Nothing in engine.log about VmLogon nor Guest agent reportion to the
engine but Admin portal populated with vm ip, user connected, ip of the
connected user (very useful info), installed app, etc.
Is there another way to know if the agent is correctly reporting to the
engine?
Will test today with a fedora host.
just to make sure - did you notice the important point of SSO only works if
you login from the user portal, not from the webadmin?
Thanks!
My test config :
Engine 3.4 beta2 on CentOS 6.5
Node CentOS 6.5 with vdsm from prerelease repo.
Storage iscsi
Le 2014-02-17 à 04:24, Frantisek Kobzik fkob...@redhat.com a écrit :
Yes, that's a valid point (however it _should_ be set to 'Guest Agent' by
default).
To sum it up, SSO should happen (on the engine side) if all these
conditions are true:
- user is connecting via userportal (not webadmin),
- guest agent presence is reported to engine,
- state of VM is strictly Up
- VM has SSO method set to Guest agent (Itamar's mail).
If these conditions are fulfilled and SSO still doesn't work, there must
be something wrong with the engine (or with reporting GA presence).
Also VmLogon command should print some information to engine's log -
could you take a look?
Cheers,
Franta.
- Original Message -
From: Itamar Heim ih...@redhat.com
To: SimmInfo si...@simminfo.com, users@ovirt.org, Frantisek Kobzik
fkob...@redhat.com
Sent: Monday, February 17, 2014 3:35:08 AM
Subject: Re: [Users] SSO from user portal to Windows 7 guest
On 02/15/2014 07:51 AM, SimmInfo wrote:
Ok, after more investigation on agent logs and some code modification it
seem that the agent is receiving commands from virtio device. As it
should. I have seen commands lock-screen, shutdown, etc... But not the
login command. Look like engine trouble... I will do more testing
tomorrow.
Simon
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
make sure it is enabled for the VM?
commit abd645d5af8a5e4f7986bef00f470171a63be823
Author: Frantisek Kobzik fkob...@redhat.com
Date: Tue Nov 26 11:16:26 2013 +0100
frontend: Allow enabling/disabling SSO
This small feature allows controlling SSO per VM.
Changes:
- new radio buttons in New/Edit VM/Template/VmPool dialog.
Change-Id: I213110a1554cd67b6cd8560477b5d7551e89f24e
Signed-off-by: Frantisek Kobzik fkob...@redhat.com
Bug-Url: https://bugzilla.redhat.com/1035279
engine log?
Get no time for testing with fedora guest but there is some log output of the
connection to the vm from user portal :
I've noticed that error : Error in finding LDAP servers for domain
rstemis.reg01.rtss.qc.ca using user levsi...@csssbasques.reg01.rtss.qc.ca
This domain : rstemis.reg01.rtss.qc.ca is not my domain but another domain
member of the same forest...
2014-02-20 00:02:47,721 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-6-thread-40) [63705695] Correlation ID: 63705695, Job ID:
bba86395-6eaa-4539-9557-2a0ba45b161c, Call Stack: null, Custom Event ID: -1,
Message: VM test was started by admin (Host:
csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca).
2014-02-20 00:02:50,795 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-47) VM test 8bf43efc-9424-4ffd-b5c6-1c92623267ea
moved from WaitForLaunch -- PoweringUp
2014-02-20 00:02:50,804 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FullListVdsCommand]
(DefaultQuartzScheduler_Worker-47) START, FullListVdsCommand(HostName =
csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca, HostId =
0e900351-de49-4646-a4b1-394343e32f81,
vds=Host[csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca],
vmIds=[8bf43efc-9424-4ffd-b5c6-1c92623267ea]), log id: 4714a293
2014-02-20 00:02:50,813 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FullListVdsCommand]
(DefaultQuartzScheduler_Worker-47) FINISH, FullListVdsCommand, return:
[Ljava.util.HashMap;@1bbd855a, log id: 4714a293
2014-02-20 00:02:50,815 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-47) Received a console Device without an address
when processing VM 8bf43efc-9424-4ffd-b5c6-1c92623267ea devices, skipping
device: {alias=console0, specParams={}, device=console, type=console,
deviceId=dd007a77-cbf1-4c58-9cea-39427e770d5d}
2014-02-20 00:03:48,442 INFO
Re: [Users] Fwd: Sample code for setting NIC - CloudInit
I'm not getting below class: import org.ovirt.engine.sdk.entities.*NetworkConfiguration*; On Thu, Feb 20, 2014 at 4:11 AM, Moti Asayag masa...@redhat.com wrote: - Original Message - From: Tejesh M tejes...@gmail.com To: users@oVirt.org users@ovirt.org Sent: Wednesday, February 19, 2014 3:24:40 PM Subject: [Users] Fwd: Sample code for setting NIC - CloudInit Hi, Can someone share me sample java code for assigning IP address for VM on eth0 through Java SDK via CloudInit ? Hi Tejesh, I've attached a sample code that sends the required request (as the output is demonstrated in debug mode). Note that the code is jdk-7 compliant. I haven't configured cloud-init and haven't tested it end-to-end. Please try to test it on your environment and provide a feedback for it. Thanks, Moti Something Like this but in Java: network_configuration nics nic nameeth0/name boot_protocolSTATIC/boot_protocol network ip address=192.168.2.11 netmask=255.255.0.0 gateway=192.168.2.1 / /network on_boottrue/on_boot /nic nic nameeth1/name boot_protocolDHCP/boot_protocol /nic nic nameeth2/name boot_protocolNONE/boot_protocol on_boottrue/on_boot /nic /nics dns servers host address1.1.2.2/address /host host address1.2.3.4/address /host /servers search_domains host addressqa.lab/address /host host address google.com /address /host /search_domains /dns /network_configuration -- Thanks Regards Tejesh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Thanks Regards Tejesh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] SSO from user portal to Windows 7 guest
On 02/20/2014 07:31 AM, simon wrote:
On February 18, 2014 at 4:47 PM Itamar Heim ih...@redhat.com wrote:
On 02/18/2014 06:59 PM, SimmInfo wrote:
Yes, I make my tests from user portal.
Envoyé de mon iPad
Le 2014-02-18 à 09:14, Itamar Heim ih...@redhat.com a écrit :
On 02/18/2014 03:36 PM, SimmInfo wrote:
Ok,
I tested it on a 3.4 beta2. Build a VM (win7 32) check Guest
agent as SSO option in vm config.
Same result as the 3.3.3 engine. No sso but lock screen on spice
session termination.
Nothing in engine.log about VmLogon nor Guest agent reportion to
the engine but Admin portal populated with vm ip, user connected, ip of
the connected user (very useful info), installed app, etc.
Is there another way to know if the agent is correctly reporting
to the engine?
Will test today with a fedora host.
just to make sure - did you notice the important point of SSO only
works if you login from the user portal, not from the webadmin?
Thanks!
My test config :
Engine 3.4 beta2 on CentOS 6.5
Node CentOS 6.5 with vdsm from prerelease repo.
Storage iscsi
Le 2014-02-17 à 04:24, Frantisek Kobzik fkob...@redhat.com a
écrit :
Yes, that's a valid point (however it _should_ be set to 'Guest
Agent' by default).
To sum it up, SSO should happen (on the engine side) if all
these conditions are true:
- user is connecting via userportal (not webadmin),
- guest agent presence is reported to engine,
- state of VM is strictly Up
- VM has SSO method set to Guest agent (Itamar's mail).
If these conditions are fulfilled and SSO still doesn't work,
there must be something wrong with the engine (or with reporting GA
presence).
Also VmLogon command should print some information to engine's
log - could you take a look?
Cheers,
Franta.
- Original Message -
From: Itamar Heim ih...@redhat.com
To: SimmInfo si...@simminfo.com, users@ovirt.org, Frantisek
Kobzik fkob...@redhat.com
Sent: Monday, February 17, 2014 3:35:08 AM
Subject: Re: [Users] SSO from user portal to Windows 7 guest
On 02/15/2014 07:51 AM, SimmInfo wrote:
Ok, after more investigation on agent logs and some code
modification it seem that the agent is receiving commands from virtio
device. As it should. I have seen commands lock-screen, shutdown, etc...
But not the login command. Look like engine trouble... I will do more
testing tomorrow.
Simon
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
make sure it is enabled for the VM?
commit abd645d5af8a5e4f7986bef00f470171a63be823
Author: Frantisek Kobzik fkob...@redhat.com
Date: Tue Nov 26 11:16:26 2013 +0100
frontend: Allow enabling/disabling SSO
This small feature allows controlling SSO per VM.
Changes:
- new radio buttons in New/Edit VM/Template/VmPool dialog.
Change-Id: I213110a1554cd67b6cd8560477b5d7551e89f24e
Signed-off-by: Frantisek Kobzik fkob...@redhat.com
Bug-Url: https://bugzilla.redhat.com/1035279
engine log?
Get no time for testing with fedora guest but there is some log output
of the connection to the vm from user portal :
I've noticed that error : *Error in finding LDAP servers for domain
rstemis.reg01.rtss.qc.ca using user levsi...@csssbasques.reg01.rtss.qc.ca*
This domain : *rstemis.reg01.rtss.qc.ca* is not my domain but another
domain member of the same forest...
2014-02-20 00:02:47,721 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-6-thread-40) [63705695] Correlation ID: 63705695,
Job ID: bba86395-6eaa-4539-9557-2a0ba45b161c, Call Stack: null, Custom
Event ID: -1, Message: VM test was started by admin (Host:
csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca).
2014-02-20 00:02:50,795 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-47) VM test
8bf43efc-9424-4ffd-b5c6-1c92623267ea moved from WaitForLaunch --
PoweringUp
2014-02-20 00:02:50,804 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FullListVdsCommand]
(DefaultQuartzScheduler_Worker-47) START, FullListVdsCommand(HostName =
csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca, HostId =
0e900351-de49-4646-a4b1-394343e32f81,
vds=Host[csl01basqu0vh01.csssbasques.reg01.rtss.qc.ca],
vmIds=[8bf43efc-9424-4ffd-b5c6-1c92623267ea]), log id: 4714a293
2014-02-20 00:02:50,813 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FullListVdsCommand]
(DefaultQuartzScheduler_Worker-47) FINISH, FullListVdsCommand, return:
[Ljava.util.HashMap;@1bbd855a, log id: 4714a293
2014-02-20 00:02:50,815 INFO
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
(DefaultQuartzScheduler_Worker-47) Received a console Device without an
address when processing VM 8bf43efc-9424-4ffd-b5c6-1c92623267ea devices,
skipping device: {alias=console0, specParams={}, device=console,
type=console,
Re: [Users] vmware image conversion
On 02/20/2014 05:34 AM, Maurice James wrote: Trying it out now -Original Message- From: Lei Cui [mailto:l...@redhat.com] Sent: Wednesday, February 19, 2014 10:23 PM To: Maurice James Cc: users@ovirt.org Subject: Re: [Users] vmware image conversion Or used #qemu-img convert es.vmdk imagexxx.img to finish the conversion -Lei - Original Message - From: Lei Cui l...@redhat.com To: Maurice James midnightst...@msn.com Cc: users@ovirt.org Sent: Thursday, February 20, 2014 10:49:39 AM Subject: Re: [Users] vmware image conversion Hi, Maurice, Have you tried virt-convert to convert vmx image to virt-image(raw or qcow2) format? Which support off-line conversion without a running ESX server -Lei - Original Message - From: Maurice James midnightst...@msn.com To: Bob Doolittle b...@doolittle.us.com, Ted Miller tmil...@hcjb.org, users@ovirt.org Sent: Thursday, February 20, 2014 9:59:07 AM Subject: Re: [Users] vmware image conversion Forgive my noobness, but are you telling me that I can convert an ESX image without the existence of a running ESX server? If someone gave me an ESX image on a DVD or hard drive I could then use virt-v2v to convert it? -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:54 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion Yes. So: VMware non-ESX - ESX, using VMware's tool, then ESX - RHEV using virt-v2v no? If this is viable, it's easy to understand why nobody wants to put effort into supporting a bevy of VMware VM formats, when there's a tool already available to convert to one and they can focus on it. -Bob On 02/19/2014 05:52 PM, Maurice James wrote: I want to change it from VMware to RHEV/oVirt -Original Message- From: Bob Doolittle [mailto:b...@doolittle.us.com] Sent: Wednesday, February 19, 2014 8:51 PM To: Maurice James; 'Ted Miller'; users@ovirt.org Subject: Re: [Users] vmware image conversion My recollection is that VMware provides a converter to change your VMware non-ESX VMs into ESX format. Do you have to buy ESX to gain access to it? -Bob On 02/19/2014 05:46 PM, Maurice James wrote: I even open a feature request that they closed pretty quickly with WONTFIX https://bugzilla.redhat.com/show_bug.cgi?id=1062910 . Why is this such a touchy issue? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Ted Miller Sent: Wednesday, February 19, 2014 7:28 PM To: users@ovirt.org Subject: Re: [Users] vmware image conversion On 2/9/2014 4:27 PM, Itamar Heim wrote: On 02/09/2014 10:28 PM, Maurice James wrote: The instructions assume that I have an ESX instance to connect to. How do I do this with an already exported vmware image with no esx available to connect to? I have a turnkey drupal vm in ovf format -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 2:24 PM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/09/2014 07:02 PM, Maurice James wrote: According to this https://rhn.redhat.com/errata/RHBA-2013-1749.html It does not do it please review: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterpri s e _Virtua lization/3.3/html-single/V2V_Guide/index.html -Original Message- From: Itamar Heim [mailto:ih...@redhat.com] Sent: Sunday, February 09, 2014 4:52 AM To: Maurice James; 'users' Subject: Re: [Users] vmware image conversion On 02/08/2014 04:18 PM, Maurice James wrote: I submitted an RFE to have vmware image conversion added to 3.5. I think that is a key feature that is lacking. Im just trying to get some eyes on it here. https://bugzilla.redhat.com/show_bug.cgi?id=1062910 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you comment on the gaps from virt-v2v which does this today (in the bug as well). thanks, Itamar iirc, you need an ESX currently. Some of us are stuck without a way to try out ovirt because of this. ESX is not the only platform that people run VMWare on. I am trying to bring over VMs from an old VMWare Server setup on Centos 5. Works fine, but there is no migration path. Other people may have VMs on VMWare Workstation or other, older products. We just get told to go fly a kite? If the only choice is to bring up a full-blown, working ESX instance, I may bring up ESXi and stay there. Ted Miller Elkhart, IN ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
