Re: [ovirt-users] oVirt 3.4 could not install Windows server 08 R2 with virtio / virtio SCSI
Hello Paul, I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for that matter). I can only recommend to try the following procedure in dealing with virtio-blk and virtio-scsi: Install Windows on a IDE drive; add a second image virtio-scsi. After the installation finishes install the driver for the unknown controller you find in device management with 'update driver' Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk respectively and remove the second disk if you like. Hope this helps, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Am 05.05.2014 um 17:29 schrieb Paul.LKW paul@gmail.com: Hi All: I just even tryied to use IDE only and the Windows 08 server R2 still could not find any harddisk, what does this bug exists in version 3.4? does it suitable for production? which one should I report this bug for ? Paul.LKW 於 4/5/2014 21:17, Paul.LKW 提到: Hi Joop It should be show me the harddisk drive after the driver installed and then change back to the installation media disc, but the case is it could not load the driver correctly I could not see the harddisk drive so even I change back the media disc should be no meaning? Paul.LKW 於 2014/5/4 下午8:48,Joop jvdw...@xs4all.nl 寫道: Paul.LKW wrote: Hi All: I am new to oVirt and just installed oVirt for a try. Any one could install Win Server 08 R2 with virtio or virtio SCSI from oVirt 3.4? I am already changed the driver during the installation with virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 it show the device but when I click to select and then click OK, it always say No new device could be found. Make sure the driver files are correct and located on the driver installation media. Does any other see this issue, and know how to solve? Many thanks Did you change back to your W2K8 iso after loading the driver? The installer displays a very misleading message if you don't have your iso back in the cdrom after installing the drivers. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users smime.p7s Description: S/MIME cryptographic signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.4 could not install Windows server 08 R2 with virtio / virtio SCSI
Hi Daniel: But poorly is I tried use IDE only and in such setting I even could not see any hard drive and Windows always asking driver !!! Disapointed for oVirt !!! BR, Paul.LKW 於 6/5/2014 14:36, Daniel Helgenberger 提到: Hello Paul, I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for that matter). I can only recommend to try the following procedure in dealing with virtio-blk and virtio-scsi: Install Windows on a IDE drive; add a second image virtio-scsi. After the installation finishes install the driver for the unknown controller you find in device management with 'update driver' Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk respectively and remove the second disk if you like. Hope this helps, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 tel:+49/30/2408781-22 F: +49/30/2408781-10 tel:+49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de http://www.m-box.de/ www.monkeymen.tv http://www.monkeymen.tv/ Am 05.05.2014 um 17:29 schrieb Paul.LKW paul@gmail.com mailto:paul@gmail.com: Hi All: I just even tryied to use IDE only and the Windows 08 server R2 still could not find any harddisk, what does this bug exists in version 3.4? does it suitable for production? which one should I report this bug for ? Paul.LKW 於 4/5/2014 21:17, Paul.LKW 提到: Hi Jooppoor It should be show me the harddisk drive after the driver installed and then change back to the installation media disc, but the case is it could not load the driver correctly I could not see the harddisk drive so even I change back the media disc should be no meaning? Paul.LKW 於 2014/5/4 下午8:48,Joop jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl 寫道: Paul.LKW wrote: Hi All: I am new to oVirt and just installed oVirt for a try. Any one could install Win Server 08 R2 with virtio or virtio SCSI from oVirt 3.4? I am already changed the driver during the installation with virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 it show the device but when I click to select and then click OK, it always say No new device could be found. Make sure the driver files are correct and located on the driver installation media. Does any other see this issue, and know how to solve? Many thanks Did you change back to your W2K8 iso after loading the driver? The installer displays a very misleading message if you don't have your iso back in the cdrom after installing the drivers. Joop ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.4 could not install Windows server 08 R2 with virtio / virtio SCSI
Hello! Ovirt 3.4 here, Windows 2008 R2 installed with virtio-win-0.1-74.iso, worked perfect, no problem encountered. On Tue, May 6, 2014 at 1:42 PM, Paul.LKW paul@gmail.com wrote: Hi Daniel: But poorly is I tried use IDE only and in such setting I even could not see any hard drive and Windows always asking driver !!! Disapointed for oVirt !!! BR, Paul.LKW 於 6/5/2014 14:36, Daniel Helgenberger 提到: Hello Paul, I run both windows server 2008r2/2012r2 in oVirt 3.4 (qemu/kvm for that matter). I can only recommend to try the following procedure in dealing with virtio-blk and virtio-scsi: Install Windows on a IDE drive; add a second image virtio-scsi. After the installation finishes install the driver for the unknown controller you find in device management with 'update driver' Shutdown the vm, change the boot disk to virtio-scsi or virtio-blk respectively and remove the second disk if you like. Hope this helps, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Am 05.05.2014 um 17:29 schrieb Paul.LKW paul@gmail.com: Hi All: I just even tryied to use IDE only and the Windows 08 server R2 still could not find any harddisk, what does this bug exists in version 3.4? does it suitable for production? which one should I report this bug for ? Paul.LKW 於 4/5/2014 21:17, Paul.LKW 提到: Hi Jooppoor It should be show me the harddisk drive after the driver installed and then change back to the installation media disc, but the case is it could not load the driver correctly I could not see the harddisk drive so even I change back the media disc should be no meaning? Paul.LKW 於 2014/5/4 下午8:48,Joop jvdw...@xs4all.nl 寫道: Paul.LKW wrote: Hi All: I am new to oVirt and just installed oVirt for a try. Any one could install Win Server 08 R2 with virtio or virtio SCSI from oVirt 3.4? I am already changed the driver during the installation with virtio-win-0.1-74.iso, however I try what ever driver directory for AMD64 it show the device but when I click to select and then click OK, it always say No new device could be found. Make sure the driver files are correct and located on the driver installation media. Does any other see this issue, and know how to solve? Many thanks Did you change back to your W2K8 iso after loading the driver? The installer displays a very misleading message if you don't have your iso back in the cdrom after installing the drivers. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] hosted engine health check issues
Are you able to reproduce reliably? If so please send us the full logs from vdsm, ha-broker and ha-agent. So far it seems like there is more problems mixed in this thread: 1. libvirt+vdsm+qemu problem when creating a snapshot 2. storage not mounted after reboot Thank you, Jirka On 04/28/2014 12:19 PM, Kevin Tibi wrote: I'am on Centos 6.5 and this repo is for fedora... 2014-04-28 12:16 GMT+02:00 Kevin Tibi kevint...@hotmail.com mailto:kevint...@hotmail.com: Hi, qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 libvirt-0.10.2-29.el6_5.7.x86_64 vdsm-4.14.6-0.el6.x86_64 kernel-2.6.32-431.el6.x86_64 kernel-2.6.32-431.11.2.el6.x86_64 i add this repop and try to update. 2014-04-28 11:57 GMT+02:00 Martin Sivak msi...@redhat.com mailto:msi...@redhat.com: Hi Kevin, thanks for the information. Agent.log and broker.log says nothing. Can you please attach those files? I would like to see how the crashed Qemu process is reported to us and what are the state machine trainsitions that cause the load. 07:23:58,994::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 84 edom: 10 level: 2 message: Operation not supported: live disk snapshot not supported with this QEMU binary What are the versions of vdsm, libvirt, qemu-kvm and kernel? If you feel like it try updating virt packages from the virt-preview repository: http://fedoraproject.org/wiki/Virtualization_Preview_Repository -- Martin Sivák msi...@redhat.com mailto:msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I use this version : ovirt-hosted-engine-ha-1.1.2-1.el6.noarch For 3 days, my engine-ha worked perfectly but i tried to snapshot a Vm and ha service make defunct == 400% CPU !! Agent.log and broker.log says nothing. But vdsm.log i have errors : Thread-9462::DEBUG::2014-04-28 07:23:58,994::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 84 edom: 10 level: 2 message: Operation not supported: live disk snapshot not supported with this QEMU binary Thread-9462::ERROR::2014-04-28 07:23:58,995::vm::4006::vm.Vm::(snapshot) vmId=`773f6e6d-c670-49f3-ae8c-dfbcfa22d0a5`::Unable to take snapshot Thread-9352::DEBUG::2014-04-28 08:41:39,922::lvm::295::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo -n /sbin/lvm vgs --config devices { preferred_names = [\\^/dev/mapper/\\] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ \'r|.*|\' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } --noheadings --units b --nosuffix --separator | -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name cc51143e-8ad7-4b0b-a4d2-9024dffc1188 ff98d346-4515-4349-8437-fb2f5e9eaadf' (cwd None) I'll try to reboot my node with hosted-engine. 2014-04-25 13:54 GMT+02:00 Martin Sivak msi...@redhat.com mailto:msi...@redhat.com: Hi Kevin, can you please tell us what version of hosted-engine are you running? rpm -q ovirt-hosted-engine-ha Also, do I understand it correctly that the engine VM is running, but you see bad status when you execute the hosted-engine --vm-status command? If that is so, can you give us current logs from /var/log/ovirt-hosted-engine-ha? -- Martin Sivák msi...@redhat.com mailto:msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Ok i mount manualy the domain for hosted engine and agent go up. But vm-status : --== Host 2 status ==-- Status up-to-date : False Hostname : 192.168.99.103 Host ID: 2 Engine status : unknown stale-data Score : 0 Local maintenance : False Host timestamp : 1398333438 And in my engine, host02 Ha is no active.
[ovirt-users] how to remove VM and Hosts ?
hello what is the correct procedure to remove VMs and Hosts? I know the right way is to remove VMs first then remove your Host, but I generate 20 VMs, just for testing, and I want to remove either the host who hosts this VMs Environment: 3 servers: srv-01 = engine , vdsm srv-02 = vdsm , spm, lots of VMs srv-03 = vdsm , lots of VMs I removed 2 hosts of my ovirt-engine steps: 1) select host and put on maintenance 2) stop all VMs 3) remove host But in VM tab I can see all VMs and can not remove . steps 1) select VM and click on remove Are you sure you want to remove the following items? - pvm0203-2 Remove Disk(s) 2) click ok Operation Canceled Error while executing action: pvm0203-2: Cannot remove VM. VM is attached to a VM-Pool. What really happens here? Where is this files located to remove manually? thanks thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how to remove VM and Hosts ?
I reinstalled the hosts step: 1) create new host I selected srv-02 2) host created 1) create new host I selected srv-03 2) host created and noticed two things : 1) I tried now, to remove the remaining VMs , but the error was the same : Cannot remove VM. VM is attached to a VM-Pool. 2) I can run theses VMs . That is, I can remove the host and reinsert again without VM problems. 2.1) And another detail: these VMs are thin/dependent. All others VMs that I was able to remove was the type clone/independent. What happens with this thin type provisioning? On Tue, May 6, 2014 at 1:42 PM, Tamer Lima tamer.amer...@gmail.com wrote: hello what is the correct procedure to remove VMs and Hosts? I know the right way is to remove VMs first then remove your Host, but I generate 20 VMs, just for testing, and I want to remove either the host who hosts this VMs Environment: 3 servers: srv-01 = engine , vdsm srv-02 = vdsm , spm, lots of VMs srv-03 = vdsm , lots of VMs I removed 2 hosts of my ovirt-engine steps: 1) select host and put on maintenance 2) stop all VMs 3) remove host But in VM tab I can see all VMs and can not remove . steps 1) select VM and click on remove Are you sure you want to remove the following items? - pvm0203-2 Remove Disk(s) 2) click ok Operation Canceled Error while executing action: pvm0203-2: Cannot remove VM. VM is attached to a VM-Pool. What really happens here? Where is this files located to remove manually? thanks thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] how to remove VM and Hosts ?
Problem solved: The VMs are related to POOL To remove these VMs 1) on tab POOLS : detach each VM from pool 2) remove pool (when I choose to detach all VMs from the pool this will remove the pool itself) When I do this , on the VM tab the icons of VMs changes from Pool Icon to Server Icon Then, on VM tab I select desired VM and click on remove. Now it works. finally: all VMs removed. now I can remove the Hosts On Tue, May 6, 2014 at 2:59 PM, Tamer Lima tamer.amer...@gmail.com wrote: I reinstalled the hosts step: 1) create new host I selected srv-02 2) host created 1) create new host I selected srv-03 2) host created and noticed two things : 1) I tried now, to remove the remaining VMs , but the error was the same : Cannot remove VM. VM is attached to a VM-Pool. 2) I can run theses VMs . That is, I can remove the host and reinsert again without VM problems. 2.1) And another detail: these VMs are thin/dependent. All others VMs that I was able to remove was the type clone/independent. What happens with this thin type provisioning? On Tue, May 6, 2014 at 1:42 PM, Tamer Lima tamer.amer...@gmail.comwrote: hello what is the correct procedure to remove VMs and Hosts? I know the right way is to remove VMs first then remove your Host, but I generate 20 VMs, just for testing, and I want to remove either the host who hosts this VMs Environment: 3 servers: srv-01 = engine , vdsm srv-02 = vdsm , spm, lots of VMs srv-03 = vdsm , lots of VMs I removed 2 hosts of my ovirt-engine steps: 1) select host and put on maintenance 2) stop all VMs 3) remove host But in VM tab I can see all VMs and can not remove . steps 1) select VM and click on remove Are you sure you want to remove the following items? - pvm0203-2 Remove Disk(s) 2) click ok Operation Canceled Error while executing action: pvm0203-2: Cannot remove VM. VM is attached to a VM-Pool. What really happens here? Where is this files located to remove manually? thanks thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Users seeing all vm's
For some reason, when logged in as a user with a modifed copy role of UserRole (only has login permssion and VM - Basic Operations - Remote Log In permission) the user can see all of the VM's and has the ability to open a console, start, shutdown or suspend any of the VM's. I have verified that all of the VM's only show the SuperUser role in their permissions. I went through all of the roles and verified that the user is only a member of the Copy_of_UserRole. The only thing I can think of is that the user is inheriting permissions from something, but I can't find what it is or where. Any suggestions? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Users seeing all vm's
Hi Jeff, * I assume that we are talking about the User Portal, not the web-admin (to which the user cannot even log into, according to the permissions that you specified). * a permission is a triplet of role, user and object. according to what you are saying, the user's permission is: - role: Copy_of_UserRole [contains Remote Log only (???)] - user: user - object: ??? what is the object with which the user's permission is associated? I suspect it is System, which would explain why the users sees all of the VMs in his user- portal (permissions inheritance, as you suspected: all VMs are descendants of System, therefore permissions on System are propagated to the VMs within the system) * are there any additional permissions for this user? a screen-shot of the user's Permissions sub-tab in the User's main tab in the web-admin would be helpful. * does the user belong to any group that has permissions on the system? if so, this user could be inheriting these permissions from that group. * are you sure that the Copy_of_UserRole role contains only the Remote Log action? if not - that can explain why the user is able to perform actions on the VMs other than Remote Log. Thanks, Einav - Original Message - From: Jeff Clay jeffc...@gmail.com To: users@ovirt.org Sent: Tuesday, May 6, 2014 4:32:28 PM Subject: [ovirt-users] Users seeing all vm's For some reason, when logged in as a user with a modifed copy role of UserRole (only has login permssion and VM - Basic Operations - Remote Log In permission) the user can see all of the VM's and has the ability to open a console, start, shutdown or suspend any of the VM's. I have verified that all of the VM's only show the SuperUser role in their permissions. I went through all of the roles and verified that the user is only a member of the Copy_of_UserRole. The only thing I can think of is that the user is inheriting permissions from something, but I can't find what it is or where. Any suggestions? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] problem in pulling zanata property files
Hi plysan, apologies for the late response (was OOO without internet connectivity last week). what we can do (maybe that's what you meant - not sure) is to make sure that when we auto-generate the 'on the fly' English .properties files (as part of the process of pushing the English strings), they are generated already in the proper naming and location, just so the matching zh-CN files will eventually be created with the similar (proper) naming and location once pulled from Zanata. this will result in changed documents' names and paths in Zanata, i.e. Zanata will actually identify these newly-named-and-located documents as 'new' documents, rather than 'updated' docuemnts, so this process is a little bit risky (existing translations may be lost) so we must do it carefully, therefore it may take a while to complete (I need to consult the Zanata people in order to find out what is the best way to address this issue). Thanks, Einav - Original Message - From: plysan ply...@gmail.com To: Einav Cohen eco...@redhat.com Cc: Users@ovirt.org List users@ovirt.org Sent: Friday, April 25, 2014 12:35:48 AM Subject: Re: [ovirt-users] problem in pulling zanata property files Hi Einav, Thanks for your reply. This is very helpful. But I think we could fake these 'on the fly' English .properties files and just use them for zanata push operation. So we don't have to rename these files every time we pull them. What do you think ? --- Thanks, plysan 2014-04-25 2:59 GMT+08:00 Einav Cohen eco...@redhat.com : Hi plysan, the 9 documents with the strange name/location [1] are properties files that do not have matching English .properties files in the oVirt-engine code repo (as opposed to LocalizedEnums_zh_CN.properties and messages_zh_CN.properties that do have matching English .properties files in the ovirt-engine code repo [2]). The matching English strings for the documents in [1] reside in the ovirt-engine code repo within GWT Constants/Message interface Java files, rather than English .properties files. Zanata cannot receive GWT Constants/Message interface Java files as input. So the process of pushing the English strings to Zanata for translation includes a GWT-compilation-based auto-generation of 'on the fly' English .properties files with similar strange naming/location (those English .properties files are not pushed into the ovirt-engine code repo), which consequently leads to the strange naming/location of the zh-CN files as well. the names/locations of the files in [1] should actually be [3]. so if you want the translations that you are pulling from Zanata to be named correctly and reside in the correct location in your local ovirt-engine code directory, simply run [4] after doing the pull from Zanata. Thanks, Einav [1] frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.common.CommonApplicationConstants_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.common.CommonApplicationMessages_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.uicompat.SpiceRedKeys_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.uicompat.UIConstants_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.uicompat.UIMessages_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.userportal.ApplicationConstants_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.userportal.ApplicationMessages_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.webadmin.ApplicationConstants_zh_CN.properties frontend/webadmin/modules/webadmin/src/main/resources/org/ovirt/engine/ui/frontend/org.ovirt.engine.ui.webadmin.ApplicationMessages_zh_CN.properties [2] frontend/webadmin/modules/uicompat/src/main/resources/org/ovirt/engine/ui/uicompat/LocalizedEnums.properties packaging/branding/ovirt.brand/messages.properties [3] frontend/webadmin/modules/gwt-common/src/main/resources/org/ovirt/engine/ui/common/CommonApplicationConstants_zh_CN.properties frontend/webadmin/modules/gwt-common/src/main/resources/org/ovirt/engine/ui/common/CommonApplicationMessages_zh_CN.properties frontend/webadmin/modules/uicompat/src/main/resources/org/ovirt/engine/ui/uicompat/SpiceRedKeys_zh_CN.properties frontend/webadmin/modules/uicompat/src/main/resources/org/ovirt/engine/ui/uicompat/UIConstants_zh_CN.properties frontend/webadmin/modules/uicompat/src/main/resources/org/ovirt/engine/ui/uicompat/UIMessages_zh_CN.properties