Re: [ovirt-users] cannot connect to spice console with portaloVirt 3.4.1

2014-05-13 Thread Zhong Qiang
It worked,The port was blocked by iptables


2014-05-13 13:53 GMT+08:00 Zhong Qiang xiaoqiang3...@gmail.com:

 In this same way I can connect to  spice console before i've upgraded
 ovirt.
 I can download the .vv file,with the following content.
 [virt-viewer]
 type=spice
 host=ovirt.vdi.com
 port=5900
 password=Fi2ah6jsr7e8
 tls-port=5901
 fullscreen=0
 title=win7_x64_one:%d - 按 SHIFT+F12 释放光标
 enable-smartcard=0
 enable-usb-autoshare=1
 delete-this-file=1
 usb-filter=-1,-1,-1,-1,0
 tls-ciphers=DEFAULT
 host-subject=O=vdi.com,CN=ovirt.vdi.com
 ca=-BEGIN
 CERTIFICATE-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\nQ+5VWhHE590NAx2xoAu0LG/FoEu2r3/z/JQ=\n-END
 CERTIFICATE-\n
 toggle-fullscreen=shift+f11
 release-cursor=shift+f12
 secure-attention=ctrl+alt+end

 secure-channels=main;inputs;cursor;playback;record;display;usbredir;smartcard


 2014-05-13 12:50 GMT+08:00 Michal Skrivanek michal.skriva...@redhat.com:



 On 13 May 2014, at 05:13, Zhong Qiang xiaoqiang3...@gmail.com wrote:

 I installed virt-viewer-0.6 on win2008R2(
 http://virt-manager.org/download/sources/virt-viewer/virt-viewer-x64-0.6.0.msi),but
 it doesn't work. and got the same error messages.


 And how did you connect before you've upgraded ovirt?
 Can you download and open the .vv file manually?

 Thanks,
 michal


 Thanks,
 qiang


 2014-05-12 18:30 GMT+08:00 Michal Skrivanek michal.skriva...@redhat.com
 :


 On May 12, 2014, at 12:04 , Zhong Qiang xiaoqiang3...@gmail.com wrote:

  since I upgraded from oVirt 3.4.0,I can't connect to spice console
 with userportal/adminportal.received this error:
  Unable to conect to the graphic server
 c:\DOCUME~1\it\LOCALS~1\Temp\console.vv
  Any help is greatly appreciated. Thank you

 Most likely you have an outdated and old virt-viewer…

 Thanks,
 michal

 
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] gluster performance oVirt 3.4

2014-05-13 Thread Humble Devassy Chirammal
|
| Citējot Vijay Bellur vbel...@redhat.com :
|   On 05/11/2014 02:04 AM, Vadims Korsaks wrote:
|HI!
|   
|Created 2 node setup with oVirt 3.4 and
| CentOS 6.5, for storage created
|2 node replicated gluster (3.5) fs on same
| hosts with oVirt.
|mount looks like this:
|127.0.0.1:/gluster01 on
|   
| /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01
| type fuse.glusterfs
|   
| (rw,default_permissions,allow_other,max_read=131072)
|   
|when i making gluster test with dd, something
| like
|dd if=/dev/zero bs=1M count=2
|   
| of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka
|i'm gettting speed ~ 110 MB/s, so this is
| 1Gbps speed of ethernet adapter
|   
|but with in VM created in oVirt speed is
| lower than 20 MB/s
|   
|why there is so huge difference?
|how can improve VMs disks speed?
|   
| 
|   What are your gluster volume settings? Have you
| applied the following
|   performance tunables in gluster's virt profile:
| 
|   eager-lock=enable
|   remote-dio=enable
| 
|   Regards,
|   Vijay
| 
| setting were:
| [root@centos155 ~]# gluster volume info gluster01
|
| Volume Name: gluster01
| Type: Replicate
| Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
| Status: Started
| Number of Bricks: 1 x 2 = 2
| Transport-type: tcp
| Bricks:
| Brick1: 10.2.75.152:/mnt/gluster01/brick
| Brick2: 10.2.75.155:/mnt/gluster01/brick
| Options Reconfigured:
| storage.owner-gid: 36
| storage.owner-uid: 36
|
|
| add your settings settings now it looks
|
| [root@centos155 ~]# gluster volume info gluster01
|
| Volume Name: gluster01
| Type: Replicate
| Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
| Status: Started
| Number of Bricks: 1 x 2 = 2
| Transport-type: tcp
| Bricks:
| Brick1: 10.2.75.152:/mnt/gluster01/brick
| Brick2: 10.2.75.155:/mnt/gluster01/brick
| Options Reconfigured:
| network.remote-dio: enable
| cluster.eager-lock: enable
| storage.owner-gid: 36
| storage.owner-uid: 36
|
|
| but this didn't affected performace in any big way
| should hosts to be restarted?
|

glusterfs storage domain configuration GUI got Optimize for virt. store
option which have to be enabled when configuring for virt store.

Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain

If the configuration is manual,  you need to set the group to 'virt' as
shown below

#gluster volume set VOLNAME group virt

This will enable below options on gluster volume :

quick-read=off
read-ahead=off
io-cache=off
stat-prefetch=off
eager-lock=enable
remote-dio=on


Can you please make sure group has set properly ?

Also, invoke  dd with oflag=direct option and check whether it helps ..


--Humble
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] is there a complete feature list for respective os template in the OS list when make a new vm

2014-05-13 Thread Michal Skrivanek

On May 12, 2014, at 11:13 , Omer Frenkel ofren...@redhat.com wrote:

 
 
 - Original Message -
 From: Ricky Schneberger ri...@schneberger.se
 To: users@ovirt.org
 Sent: Friday, May 9, 2014 10:16:21 AM
 Subject: [ovirt-users] is there a complete feature list for respective os
 template in the OS list when make a new vm
 
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA1
 
 Hi,
 
 When I will make a new Windows 2012 vm and choose OS-type 2012 I am
 unable to connect with spice to the vm,but if I change this to type 2008
 R2 I can. Still I am not able to install spice-guest-tools to the vm as
 its not supported the installer told me.
 
 So what is the difference between these OS types in the selector?
 Is there a complete list (CPU features etc)to get where I can se the
 differences between the OS types?
 
 
 most per-guest-os configuration is found under
 /etc/ovirt-engine/osinfo.conf.d/
 
 but i dont see a reason for spice to fail with one and not the other. 

Win2012 and Win8 have SPICE disabled in osinfo. Only VNC is allowed since there 
is/were no qxl drivers.


 
 
 regards
 
 - --
 Ricky Schneberger
 
 -BEGIN PGP SIGNATURE-
 Version: GnuPG v1.4.14 (GNU/Linux)
 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
 
 iEYEARECAAYFAlNsgMUACgkQOap81biMC2O10gCfeh6U+Z6taWGOnFiLDZfNXN+H
 iIQAnjRfOd3SEFukIxRSqGQOW0OK4fj3
 =2nk+
 -END PGP SIGNATURE-
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] is there a complete feature list for respective os template in the OS list when make a new vm

2014-05-13 Thread Sven Kieske
Am 12.05.2014 11:13, schrieb Omer Frenkel:
 most per-guest-os configuration is found under 
 /etc/ovirt-engine/osinfo.conf.d/

This implies you can not find
_all_ info there, where is the rest? ;)

Thanks in advance

-- 
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH  Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad
Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

2014-05-13 Thread Federico Simoncelli
- Original Message -
 From: Ricardo Esteves ricardo.m.este...@gmail.com
 To: users@ovirt.org
 Sent: Friday, April 11, 2014 1:07:31 AM
 Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
 
 Hi,
 
 I've put my host on maintenance, then i configured iscsi offload for my
 broadcom cards changing target's file's (192.168.12.2,3260 and
 192.168.12.4,3260) in my node
 iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface
 bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations
 are back to default.

Can you share the changes you made? Thanks.

-- 
Federico
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)

2014-05-13 Thread Steven Van Acker
Hello all,

I was asked to post the following problem on this mailinglist.

After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the
instructions from
http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions
I went to http://localhost.localdomain:80/ovirt-engine as indicated and was
redirected to a 404 page. The same happened when using https.

During the installation, engine-setup will print out the following on my VM
with 512MB RAM:

[WARNING] Warning: Not enough memory is available on the host. Minimum
requirement is 4096MB, and 16384MB is recommended.
  SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00
  Internal CA
FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47
  Web access is enabled at:
  http://localhost.localdomain:80/ovirt-engine
  https://localhost.localdomain:443/ovirt-engine
  Please use the user admin and password specified in order to
login into oVirt Engine

The consequence of not having enough RAM for oVirt is that it will silently
fail to start up, without apparent errors or warnings.
In my view, the warning above should be rephrased as Not enough memory is
available on the host, oVirt will refuse to start and colored red.

The solution to this problem is to have at least 4GB of RAM, after which
oVirt seems to start up fine (with only 1.2GB of RAM in use).

kr,
-- Steven
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] stateless is false, but state changes do not persist after a poweroff.

2014-05-13 Thread Zhong Qiang
oVirt:3.4.1
Guest_OS: win7_x64
VMpool_Name:normal

[oVirt shell (connected)]# list vms --query name=normal-8 --show-all

id   : 92d11bbd-61dd-49a2-a18a-aeed44f06bb6
name : normal-8
cluster-id   : ecd1f4cd-a3f4-46ea-a2ad-dc604218d47a
cpu-architecture : X86_64
cpu-topology-cores   : 1
cpu-topology-sockets : 2
cpu_shares   : 0
creation_time: 2014-05-09 14:25:04+08:00
delete_protected : False
display-address  : ovirt.vdi.com
display-allow_override   : False
display-monitors : 1
display-port : 5900
display-secure_port  : 5901
display-single_qxl_pci   : False
display-smartcard_enabled: False
display-type : spice
high_availability-enabled: False
high_availability-priority   : 0
host-id  : 867b2e10-45fe-4305-98af-b7aa6fddb2a6
memory   : 1073741824
memory_policy-guaranteed : 536870912
migration_downtime   : -1
origin   : ovirt
os-boot-dev  : hd
os-type  : windows_7x64
placement_policy-affinity: migratable
placement_policy-host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6
sso-methods-method-id: GUEST_AGENT
start_time   : 2014-05-13 15:40:20.855000+08:00
stateless: False
status-state : up
stop_time: 2014-05-13 15:40:02.807000+08:00
template-id  : 3f72cea1-9b2f-4025-862a-8acd3010fcb1
type : desktop
usb-enabled  : False
vmpool-id: f12de2e0-1b68-4f77-a428-a9a83a5ac458
*I create a file called vmuser1 and put it in the desktop on
vm(normal-8:win7),then shut down and power on*. *This file disappeared*


Thanks,
qiang
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] gluster performance oVirt 3.4

2014-05-13 Thread Humble Chirammal




| 
| Citējot Vijay Bellur vbel...@redhat.com :
|   On 05/11/2014 02:04 AM, Vadims Korsaks wrote:
|HI!
|   
|Created 2 node setup with oVirt 3.4 and
| CentOS 6.5, for storage created
|2 node replicated gluster (3.5) fs on same
| hosts with oVirt.
|mount looks like this:
|127.0.0.1:/gluster01 on
|   
| /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01
| type fuse.glusterfs
|   
| (rw,default_permissions,allow_other,max_read=131072)
|   
|when i making gluster test with dd, something
| like
|dd if=/dev/zero bs=1M count=2
|   
| of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka
|i'm gettting speed ~ 110 MB/s, so this is
| 1Gbps speed of ethernet adapter
|   
|but with in VM created in oVirt speed is
| lower than 20 MB/s
|   
|why there is so huge difference?
|how can improve VMs disks speed?
|   
| 
|   What are your gluster volume settings? Have you
| applied the following
|   performance tunables in gluster's virt profile:
| 
|   eager-lock=enable
|   remote-dio=enable
| 
|   Regards,
|   Vijay
| 
| setting were:
| [root@centos155 ~]# gluster volume info gluster01
| 
| Volume Name: gluster01
| Type: Replicate
| Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
| Status: Started
| Number of Bricks: 1 x 2 = 2
| Transport-type: tcp
| Bricks:
| Brick1: 10.2.75.152:/mnt/gluster01/brick
| Brick2: 10.2.75.155:/mnt/gluster01/brick
| Options Reconfigured:
| storage.owner-gid: 36
| storage.owner-uid: 36
| 
| 
| add your settings settings now it looks
| 
| [root@centos155 ~]# gluster volume info gluster01
| 
| Volume Name: gluster01
| Type: Replicate
| Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
| Status: Started
| Number of Bricks: 1 x 2 = 2
| Transport-type: tcp
| Bricks:
| Brick1: 10.2.75.152:/mnt/gluster01/brick
| Brick2: 10.2.75.155:/mnt/gluster01/brick
| Options Reconfigured:
| network.remote-dio: enable
| cluster.eager-lock: enable
| storage.owner-gid: 36
| storage.owner-uid: 36
| 
| 
| but this didn't affected performace in any big way
| should hosts to be restarted?
| 

glusterfs storage domain configuration GUI got Optimize for virt. store 
option which have to be enabled when configuring for virt store.

Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain

If the configuration is manual,  you need to set the group to 'virt' as shown 
below

#gluster volume set VOLNAME group virt

This will enable below options on gluster volume :

quick-read=off
read-ahead=off
io-cache=off
stat-prefetch=off
eager-lock=enable
remote-dio=on


Can you please make sure group has set properly ?

Also, invoke  dd with oflag=direct option and check whether it helps ..


--Humble

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Fwd: question from facebook : i'm writing about ovirt in French magazine

2014-05-13 Thread PC-CALL Liège - Raphaël Neijens

Hi all i'm writing about ovirt in a French magazine ... What do you think i 
cań't Forget to speak about ? Ovirt VS Vsphere  Why is ovirt better ? 
Thanks for help

   PC-CALL Liège - Neva Systems sprl
 Raphaël  NEIJENS | Responsable technique
  Quai des ardennes 140 - 4031 Angleur ( Liège, Belgique )  
  tel : (+32) 4 277 93 38 - (+32) 476 217 188  
  raph...@pc-call.be
  Facebook |  Twitter |   www.pc-call.bewww.raphaelneijens.be___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)

2014-05-13 Thread Steven Van Acker
Hello all,

I was asked to post the following problem on this mailinglist.

After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the
instructions from
http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions
I went to http://localhost.localdomain:80/ovirt-engine as indicated and was
redirected to a 404 page. The same happened when using https.

During the installation, engine-setup will print out the following on my VM
with 512MB RAM:

[WARNING] Warning: Not enough memory is available on the host. Minimum
requirement is 4096MB, and 16384MB is recommended.
  SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00
  Internal CA
FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47
  Web access is enabled at:
  http://localhost.localdomain:80/ovirt-engine
  https://localhost.localdomain:443/ovirt-engine
  Please use the user admin and password specified in order to
login into oVirt Engine

The consequence of not having enough RAM for oVirt is that it will silently
fail to start up, without apparent errors or warnings.
In my view, the warning above should be rephrased as Not enough memory is
available on the host, oVirt will refuse to start and colored red.

The solution to this problem is to have at least 4GB of RAM, after which
oVirt seems to start up fine (with only 1.2GB of RAM in use).

kr,
-- Steven
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Sandro Bonazzola
Il 13/05/2014 00:33, Bob Doolittle ha scritto:
 On 05/12/2014 06:21 PM, Dan Kenigsberg wrote:
 On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote:
 On 05/12/2014 02:49 PM, Bob Doolittle wrote:
 Hi,

 I'm trying to set up a fresh system on F19, using oVirt 3.4.

 When running hosted-engine --deploy, it fails during Configuring the
 management bridge. The ovirt-hosted-engine-setup log shows:

 2014-05-12 13:59:35 INFO
 otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196
 Configuring the management bridge
 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in
 _executeMethod
 method['method']()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,
 line 201, in _misc
 ].s.getVdsCapabilities()['info']['nics'][nics]
 KeyError: 'info'
 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed
 to execute stage 'Misc configuration': 'info'


 The vdsm.log shows:

 Thread-14::DEBUG::2014-05-12
 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call
 getCapabilities with () {}
 Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd)
 '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
 Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd)
 SUCCESS: err = ''; rc = 0
 Thread-14::ERROR::2014-05-12
 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
 Traceback (most recent call last):
   File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
 res = f(*args, **kwargs)
   File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
 ret = api.getCapabilities()
   File /usr/share/vdsm/API.py, line 1185, in getCapabilities
 c = caps.get()
   File /usr/share/vdsm/caps.py, line 369, in get
 caps.update(netinfo.get())
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in
 get
 d['nics'][dev.name] = _nicinfo(dev.name, paddr)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in
 _nicinfo
 info = _devinfo(nic)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in
 _devinfo
 ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in
 getIpInfo
 ipv6addrs = devInfo.get_ipv6_addresses()
 SystemError: error return without exception set


 I have two NICs - a wireless NIC which is disabled, and an ethernet NIC
 p3p1 which is statically configured via network-scripts.

 I've also attached the output of ip addr.

 I also notice some disturbing looking messages in the vdsm log during
 setupMultipath, including Panic: Error initializing IRS and then
 subsequent lvm-related errors during StorageRefresh. Those did not abort
 the deployment, however. What do those failures indicate?
 This looks a lot like a new manifestation of:
 https://bugzilla.redhat.com/show_bug.cgi?id=1057772
 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should
 have fixed the that problem.
 
 
 I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): 
 vdsm-4.14.6-0.fc19.x86_64
 
 Should stable be updated with vdsm-4.14.7?
 Can I workaround the problem by using a different repository?
 
 I even instrumented the code in
 /usr/lib64/python2.7/site-packages/vdsm/netinfo.py

 The device name (p3p1) being passed in is correct (I even tried setting
 the string directly), but the returned object is empty.

 If I start python by hand and run ethtool.get_interfaces_info(p3p1) it
 returns the correct data.

 So it seems as though the code is somehow environmentally sensitive. I'm not
 sure what it is about my environment that would cause issues here however,
 since presumably this is working for others...
 I'm afraid this has recently been tickled by a relase of python-ethtool
 to Fedora 19.
 
 What is my best workaround? I need to get going again ASAP.

if it's a python-ethtool issue, try with
yum downgrade python-ethtool
if it works, add it to exclusion (in /etc/yum.conf add exclude=python-ethtool) 
until the issue is fixed.

Dan, can we have a respin of VDSM once the issue is handled (if it has to be 
solved vdsm side)?

If we haven't already a BZ, please open one and make it blocking 3.4.2 release, 
thanks!

 
 Thanks,
 Bob
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)

2014-05-13 Thread Yedidyah Bar David
- Original Message -
 From: Steven Van Acker steven.vanac...@cs.kuleuven.be
 To: users@ovirt.org
 Sent: Tuesday, May 13, 2014 10:39:03 AM
 Subject: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on
 CentOS 6.5 (+ solution)
 
 Hello all,
 
 I was asked to post the following problem on this mailinglist.
 
 After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the
 instructions from
 http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions
 I went to http://localhost.localdomain:80/ovirt-engine as indicated and was
 redirected to a 404 page. The same happened when using https.
 
 During the installation, engine-setup will print out the following on my VM
 with 512MB RAM:
 
 [WARNING] Warning: Not enough memory is available on the host. Minimum
 requirement is 4096MB, and 16384MB is recommended.
 SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00
 Internal CA FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47
 Web access is enabled at:
 http://localhost.localdomain:80/ovirt-engine
 https://localhost.localdomain:443/ovirt-engine
 Please use the user admin and password specified in order to login into
 oVirt Engine
 
 The consequence of not having enough RAM for oVirt is that it will silently
 fail to start up, without apparent errors or warnings.

You mean, in the log?

 In my view, the warning above should be rephrased as Not enough memory is
 available on the host, oVirt will refuse to start and colored red.

Did it 'refuse' to start, or simply failed to start?

With what conditions exactly you want this error? What if the engine does
manage to start (e.g. because you did some weird tweaking and managed to
make it run in 256MB)? What if it later fails, after you add a few tens of
hosts/VMs?

I know I regularly use a 1GB VM for testing setup, never had problems.

Generally, red stuff in setup is reserved to real errors - when something
failed.

 
 The solution to this problem is to have at least 4GB of RAM, after which
 oVirt seems to start up fine (with only 1.2GB of RAM in use).

How did you measure that? On my current test VM, I have:

# ps aux | grep ovirt-engine
ovirt10840  0.0  0.2 207952  2168 ?Ss   10:08   0:00 
/usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py 
--redirect-output --systemd=notify start
ovirt10879  0.8 52.4 2247040 534892 ?  Sl   10:08   0:46 ovirt-engine 
-server -XX:+TieredCompilation -Xms1g -Xmx1g -XX:PermSize=256m 
-XX:MaxPermSize=256m -Djava.net.preferIPv4Stack=true 
-Dsun.rmi.dgc.client.gcInterval=360 -Dsun.rmi.dgc.server.gcInterval=360 
-Djava.awt.headless=true -Djsse.enableSNIExtension=false 
-XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/ovirt-engine/dump 
-Djava.util.logging.manager=org.jboss.logmanager 
-Dlogging.configuration=file:///var/tmp/ovirt-engine/config/ovirt-engine-logging.properties
 -Dorg.jboss.resolver.warning=true 
-Djboss.modules.system.pkgs=org.jboss.byteman 
-Djboss.modules.write-indexes=false -Djboss.server.default.config=ovirt-engine 
-Djboss.home.dir=/usr/share/jboss-as 
-Djboss.server.base.dir=/usr/share/ovirt-engine 
-Djboss.server.data.dir=/var/lib/ovirt-engine 
-Djboss.server.log.dir=/var/log/ovirt-engine 
-Djboss.server.config.dir=/var/tmp/ovirt-engine/config 
-Djboss.server.temp.dir=/var/tmp/ovirt-engine/tmp -D
 jboss.controller.temp.dir=/var/tmp/ovirt-engine/tmp -jar 
/usr/share/jboss-as/jboss-modules.jar -mp 
/var/tmp/ovirt-engine/modules/00-ovirt-engin 
-modules:/var/tmp/ovirt-engine/modules/01-jboss-as-modules -jaxpmodule 
javax.xml.jaxp-provider org.jboss.as.standalone -c ovirt-engine.xml
ovirt10900  0.0  0.2 286084  2604 ?Ss   10:08   0:01 
/usr/bin/python 
/usr/share/ovirt-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.py 
--systemd=notify start
root 12200  0.0  0.0 112636   964 pts/10   S+   11:38   0:00 grep 
--color=auto ovirt-engine

# free
 total   used   free sharedbuffers cached
Mem:   1019660 936780  82880  0   5068 259496
-/+ buffers/cache: 672216 347444
Swap: 14749692 164328   14585364

So the engine uses 2.2GB of virtual memory, but only 530MB rss, and total
system use is, without caches, 670MB. So it's likely that a 512MB VM will
not be enough.

Thanks for the report!
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread David Sommerseth
On 13/05/14 00:35, Bob Doolittle wrote:
 Also - is there a bugID for this new issue?
 
 The one I quoted is supposed to only affect non-existent device names.
 Why is this affecting valid device names as well, and only in the VDSM
 context?

Antonio may correct me here, but I believe it's caused by vdsm using
libnl-1.x and py-ethtool using libnl3.  We've discovered an issue with
this combination, where libnl-1.x is able to invalidate the netlink
socket libnl3 gives py-ethtool; rendering py-ethtool useless.

This issue is somewhat tracked in this bz:
https://bugzilla.redhat.com/show_bug.cgi?id=1078312

This is actually quite a delicate issue, as I believe there are some
fixes in vdsm, py-ethtool have some patches to improve the error
handling (which should help vdsm too) and we're waiting for an official
libnl3 update to tackle the socket handling better.

I have hopes that once the libnl3 fixes gets out, much of this will be
solved.


David S.


 On 05/12/2014 06:21 PM, Dan Kenigsberg wrote:
 On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote:
 On 05/12/2014 02:49 PM, Bob Doolittle wrote:
 Hi,

 I'm trying to set up a fresh system on F19, using oVirt 3.4.

 When running hosted-engine --deploy, it fails during Configuring the
 management bridge. The ovirt-hosted-engine-setup log shows:

 2014-05-12 13:59:35 INFO
 otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196
 Configuring the management bridge
 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152
 method
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.7/site-packages/otopi/context.py, line
 142, in
 _executeMethod
 method['method']()
   File
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,

 line 201, in _misc
 ].s.getVdsCapabilities()['info']['nics'][nics]
 KeyError: 'info'
 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161
 Failed
 to execute stage 'Misc configuration': 'info'


 The vdsm.log shows:

 Thread-14::DEBUG::2014-05-12
 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client
 [127.0.0.1]::call
 getCapabilities with () {}
 Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd)
 '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
 Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd)
 SUCCESS: err = ''; rc = 0
 Thread-14::ERROR::2014-05-12
 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
 Traceback (most recent call last):
   File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
 res = f(*args, **kwargs)
   File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
 ret = api.getCapabilities()
   File /usr/share/vdsm/API.py, line 1185, in getCapabilities
 c = caps.get()
   File /usr/share/vdsm/caps.py, line 369, in get
 caps.update(netinfo.get())
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
 566, in
 get
 d['nics'][dev.name] = _nicinfo(dev.name, paddr)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
 516, in
 _nicinfo
 info = _devinfo(nic)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
 536, in
 _devinfo
 ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
 317, in
 getIpInfo
 ipv6addrs = devInfo.get_ipv6_addresses()
 SystemError: error return without exception set


 I have two NICs - a wireless NIC which is disabled, and an ethernet NIC
 p3p1 which is statically configured via network-scripts.

 I've also attached the output of ip addr.

 I also notice some disturbing looking messages in the vdsm log during
 setupMultipath, including Panic: Error initializing IRS and then
 subsequent lvm-related errors during StorageRefresh. Those did not
 abort
 the deployment, however. What do those failures indicate?
 This looks a lot like a new manifestation of:
 https://bugzilla.redhat.com/show_bug.cgi?id=1057772
 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should
 have fixed the that problem.

 I even instrumented the code in
 /usr/lib64/python2.7/site-packages/vdsm/netinfo.py

 The device name (p3p1) being passed in is correct (I even tried
 setting
 the string directly), but the returned object is empty.

 If I start python by hand and run ethtool.get_interfaces_info(p3p1) it
 returns the correct data.

 So it seems as though the code is somehow environmentally sensitive.
 I'm not
 sure what it is about my environment that would cause issues here
 however,
 since presumably this is working for others...
 I'm afraid this has recently been tickled by a relase of python-ethtool
 to Fedora 19.
 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] How to install spice-xpi-2.8 on ubuntu12.04?

2014-05-13 Thread David Jaša
Hi Qiang,

you should be able to rebuild debian spice-xpi package:
https://packages.debian.org/source/spice-xpi
That should give you working spice-xpi with least effort.

David

On Čt, 2014-05-08 at 13:22 +0800, Zhong Qiang wrote:
 when i complie spice-xpi-2.8 on ubuntu12.04 with firefox29,i receive
 this error:
 
 root@user:~/src/spice-xpi-2.8# make
 make  all-recursive
 make[1]: Entering directory `/root/src/spice-xpi-2.8'
 Making all in SpiceXPI
 make[2]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI'
 Making all in src
 make[3]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI/src'
 Making all in plugin
 make[4]: Entering directory
 `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin'
   GENnsISpicec.xpt
 make  all-am
 make[5]: Entering directory
 `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin'
   CXXlibnsISpicec_la-controller.lo
 controller.cpp: In destructor 'SpiceController::~SpiceController()':
 controller.cpp:73:5: warning: format not a string literal and no
 format arguments [-Wformat-security]
   CXXlibnsISpicec_la-np_entry.lo
   CXXlibnsISpicec_la-npn_gate.lo
   CXXlibnsISpicec_la-npp_gate.lo
   CXXlibnsISpicec_la-nsScriptablePeer.lo
 In file included from nsScriptablePeer.cpp:54:0:
 /root/src/xulrunner-sdk/include/nsError.h:186:14: error: expected
 constructor, destructor, or type conversion before '(' token
 /root/src/xulrunner-sdk/include/nsError.h:188:14: error: expected
 constructor, destructor, or type conversion before '(' token
 make[5]: *** [libnsISpicec_la-nsScriptablePeer.lo] Error 1
 make[5]: Leaving directory
 `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin'
 make[4]: *** [all] Error 2
 make[4]: Leaving directory
 `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin'
 make[3]: *** [all-recursive] Error 1
 make[3]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI/src'
 make[2]: *** [all-recursive] Error 1
 make[2]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI'
 make[1]: *** [all-recursive] Error 1
 make[1]: Leaving directory `/root/src/spice-xpi-2.8'
 make: *** [all] Error 2
 #
 
 Any help is greatly appreciated. Thank you
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbee questions

2014-05-13 Thread Sven Kieske
Am 13.05.2014 11:12, schrieb Dan Kenigsberg:
 If you are planning to run only a couple of VMs on a single laptop,
 going to basics and using qemu/libvirt directly, or gnome-boxes, would
 make sense.
 
 If you plan to manage a multitude of hosts, then the benefits of oVirt
 comes to play.

In the long run, it would be a huge achievement to utilize ovirt
even for little vm workloads, especially if you want to compete
with vmware.

I know one size never fits all but I guess ovirt could very well
be improved for single host management as well.

-- 
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH  Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] stateless is false, but state changes do not persist after a poweroff.

2014-05-13 Thread Zhong Qiang
 I've known that Virtual machines in a pool are stateless,meaning that data
is not persistent across reboots. Virtual machines in a pool are started
when taken by a user, and shut down when the user is finished.


2014-05-13 16:10 GMT+08:00 Zhong Qiang xiaoqiang3...@gmail.com:

 oVirt:3.4.1
 Guest_OS: win7_x64
 VMpool_Name:normal

 [oVirt shell (connected)]# list vms --query name=normal-8 --show-all

 id   : 92d11bbd-61dd-49a2-a18a-aeed44f06bb6
 name : normal-8
 cluster-id   : ecd1f4cd-a3f4-46ea-a2ad-dc604218d47a
 cpu-architecture : X86_64
 cpu-topology-cores   : 1
 cpu-topology-sockets : 2
 cpu_shares   : 0
 creation_time: 2014-05-09 14:25:04+08:00
 delete_protected : False
 display-address  : ovirt.vdi.com
 display-allow_override   : False
 display-monitors : 1
 display-port : 5900
 display-secure_port  : 5901
 display-single_qxl_pci   : False
 display-smartcard_enabled: False
 display-type : spice
 high_availability-enabled: False
 high_availability-priority   : 0
 host-id  : 867b2e10-45fe-4305-98af-b7aa6fddb2a6
 memory   : 1073741824
 memory_policy-guaranteed : 536870912
 migration_downtime   : -1
 origin   : ovirt
 os-boot-dev  : hd
 os-type  : windows_7x64
 placement_policy-affinity: migratable
 placement_policy-host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6
 sso-methods-method-id: GUEST_AGENT
 start_time   : 2014-05-13 15:40:20.855000+08:00
 stateless: False
 status-state : up
 stop_time: 2014-05-13 15:40:02.807000+08:00
 template-id  : 3f72cea1-9b2f-4025-862a-8acd3010fcb1
 type : desktop
 usb-enabled  : False
 vmpool-id: f12de2e0-1b68-4f77-a428-a9a83a5ac458
 *I create a file called vmuser1 and put it in the desktop on
 vm(normal-8:win7),then shut down and power on*. *This file disappeared*


 Thanks,
 qiang

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Antoni Segura Puimedon


- Original Message -
 From: David Sommerseth dav...@redhat.com
 To: Bob Doolittle b...@doolittle.us.com, Dan Kenigsberg 
 dan...@redhat.com, asegu...@redhat.com
 Cc: users users@ovirt.org
 Sent: Tuesday, May 13, 2014 10:59:47 AM
 Subject: Re: Failure during self-hosted deployment: exception configuring 
 management bridge
 
 On 13/05/14 00:35, Bob Doolittle wrote:
  Also - is there a bugID for this new issue?
  
  The one I quoted is supposed to only affect non-existent device names.
  Why is this affecting valid device names as well, and only in the VDSM
  context?
 
 Antonio may correct me here, but I believe it's caused by vdsm using
 libnl-1.x and py-ethtool using libnl3.  We've discovered an issue with
 this combination, where libnl-1.x is able to invalidate the netlink
 socket libnl3 gives py-ethtool; rendering py-ethtool useless.
 
 This issue is somewhat tracked in this bz:
 https://bugzilla.redhat.com/show_bug.cgi?id=1078312
 
 This is actually quite a delicate issue, as I believe there are some
 fixes in vdsm, py-ethtool have some patches to improve the error
 handling (which should help vdsm too) and we're waiting for an official
 libnl3 update to tackle the socket handling better.
 
 I have hopes that once the libnl3 fixes gets out, much of this will be
 solved.

In vdsm's ovirt-3.4 branch we have detection of ethtool's version and use the
same libnl version, as seen in:
http://gerrit.ovirt.org/gitweb?p=vdsm.git;a=blob_plain;f=lib/vdsm/netlink.py;hb=7e306159d5f10f67197d499daa282d3d4c1bef73

if _ethtool_uses_libnl3():

This looks to me like there might be a python-ethtool 0.9.2 bug for devices
that do not get ipv6 autoconf addresses. I'll investigate.

 
 
 David S.
 
 
  On 05/12/2014 06:21 PM, Dan Kenigsberg wrote:
  On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote:
  On 05/12/2014 02:49 PM, Bob Doolittle wrote:
  Hi,
 
  I'm trying to set up a fresh system on F19, using oVirt 3.4.
 
  When running hosted-engine --deploy, it fails during Configuring the
  management bridge. The ovirt-hosted-engine-setup log shows:
 
  2014-05-12 13:59:35 INFO
  otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196
  Configuring the management bridge
  2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152
  method
  exception
  Traceback (most recent call last):
File /usr/lib/python2.7/site-packages/otopi/context.py, line
  142, in
  _executeMethod
  method['method']()
File
  /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,
 
  line 201, in _misc
  ].s.getVdsCapabilities()['info']['nics'][nics]
  KeyError: 'info'
  2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161
  Failed
  to execute stage 'Misc configuration': 'info'
 
 
  The vdsm.log shows:
 
  Thread-14::DEBUG::2014-05-12
  13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client
  [127.0.0.1]::call
  getCapabilities with () {}
  Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd)
  '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
  Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd)
  SUCCESS: err = ''; rc = 0
  Thread-14::ERROR::2014-05-12
  13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
  Traceback (most recent call last):
File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
  res = f(*args, **kwargs)
File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
  ret = api.getCapabilities()
File /usr/share/vdsm/API.py, line 1185, in getCapabilities
  c = caps.get()
File /usr/share/vdsm/caps.py, line 369, in get
  caps.update(netinfo.get())
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
  566, in
  get
  d['nics'][dev.name] = _nicinfo(dev.name, paddr)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
  516, in
  _nicinfo
  info = _devinfo(nic)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
  536, in
  _devinfo
  ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line
  317, in
  getIpInfo
  ipv6addrs = devInfo.get_ipv6_addresses()
  SystemError: error return without exception set
 
 
  I have two NICs - a wireless NIC which is disabled, and an ethernet NIC
  p3p1 which is statically configured via network-scripts.
 
  I've also attached the output of ip addr.
 
  I also notice some disturbing looking messages in the vdsm log during
  setupMultipath, including Panic: Error initializing IRS and then
  subsequent lvm-related errors during StorageRefresh. Those did not
  abort
  the deployment, however. What do those failures indicate?
  This looks a lot like a new manifestation of:
  https://bugzilla.redhat.com/show_bug.cgi?id=1057772
  Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should
  have fixed the that problem.
 
  I even instrumented the code in
  

Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Dan Kenigsberg
On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote:
 Il 13/05/2014 00:33, Bob Doolittle ha scritto:
  On 05/12/2014 06:21 PM, Dan Kenigsberg wrote:
  On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote:
  On 05/12/2014 02:49 PM, Bob Doolittle wrote:
  Hi,
 
  I'm trying to set up a fresh system on F19, using oVirt 3.4.
 
  When running hosted-engine --deploy, it fails during Configuring the
  management bridge. The ovirt-hosted-engine-setup log shows:
 
  2014-05-12 13:59:35 INFO
  otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196
  Configuring the management bridge
  2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method
  exception
  Traceback (most recent call last):
File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in
  _executeMethod
  method['method']()
File 
  /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,
  line 201, in _misc
  ].s.getVdsCapabilities()['info']['nics'][nics]
  KeyError: 'info'
  2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed
  to execute stage 'Misc configuration': 'info'
 
 
  The vdsm.log shows:
 
  Thread-14::DEBUG::2014-05-12
  13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client 
  [127.0.0.1]::call
  getCapabilities with () {}
  Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd)
  '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
  Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd)
  SUCCESS: err = ''; rc = 0
  Thread-14::ERROR::2014-05-12
  13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
  Traceback (most recent call last):
File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
  res = f(*args, **kwargs)
File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
  ret = api.getCapabilities()
File /usr/share/vdsm/API.py, line 1185, in getCapabilities
  c = caps.get()
File /usr/share/vdsm/caps.py, line 369, in get
  caps.update(netinfo.get())
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in
  get
  d['nics'][dev.name] = _nicinfo(dev.name, paddr)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in
  _nicinfo
  info = _devinfo(nic)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in
  _devinfo
  ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in
  getIpInfo
  ipv6addrs = devInfo.get_ipv6_addresses()
  SystemError: error return without exception set
 
 
  I have two NICs - a wireless NIC which is disabled, and an ethernet NIC
  p3p1 which is statically configured via network-scripts.
 
  I've also attached the output of ip addr.
 
  I also notice some disturbing looking messages in the vdsm log during
  setupMultipath, including Panic: Error initializing IRS and then
  subsequent lvm-related errors during StorageRefresh. Those did not abort
  the deployment, however. What do those failures indicate?
  This looks a lot like a new manifestation of:
  https://bugzilla.redhat.com/show_bug.cgi?id=1057772
  Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should
  have fixed the that problem.
  
  
  I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): 
  vdsm-4.14.6-0.fc19.x86_64
  
  Should stable be updated with vdsm-4.14.7?
  Can I workaround the problem by using a different repository?
  
  I even instrumented the code in
  /usr/lib64/python2.7/site-packages/vdsm/netinfo.py
 
  The device name (p3p1) being passed in is correct (I even tried setting
  the string directly), but the returned object is empty.
 
  If I start python by hand and run ethtool.get_interfaces_info(p3p1) it
  returns the correct data.
 
  So it seems as though the code is somehow environmentally sensitive. I'm 
  not
  sure what it is about my environment that would cause issues here however,
  since presumably this is working for others...
  I'm afraid this has recently been tickled by a relase of python-ethtool
  to Fedora 19.
  
  What is my best workaround? I need to get going again ASAP.
 
 if it's a python-ethtool issue, try with
 yum downgrade python-ethtool
 if it works, add it to exclusion (in /etc/yum.conf add 
 exclude=python-ethtool) until the issue is fixed.
 
 Dan, can we have a respin of VDSM once the issue is handled (if it has to be 
 solved vdsm side)?
 
 If we haven't already a BZ, please open one and make it blocking 3.4.2 
 release, thanks!

The bug has been solved in vdsm-4.14.7, and should have been in
ovirt-3.4-stable as of the release of ovirt-3.4.1. Sandro, do you know
why Bob reports that 4.14.6 is still there?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Sandro Bonazzola
Il 13/05/2014 11:50, Dan Kenigsberg ha scritto:
 On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote:
 Il 13/05/2014 00:33, Bob Doolittle ha scritto:
 On 05/12/2014 06:21 PM, Dan Kenigsberg wrote:
 On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote:
 On 05/12/2014 02:49 PM, Bob Doolittle wrote:
 Hi,

 I'm trying to set up a fresh system on F19, using oVirt 3.4.

 When running hosted-engine --deploy, it fails during Configuring the
 management bridge. The ovirt-hosted-engine-setup log shows:

 2014-05-12 13:59:35 INFO
 otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196
 Configuring the management bridge
 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in
 _executeMethod
 method['method']()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,
 line 201, in _misc
 ].s.getVdsCapabilities()['info']['nics'][nics]
 KeyError: 'info'
 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed
 to execute stage 'Misc configuration': 'info'


 The vdsm.log shows:

 Thread-14::DEBUG::2014-05-12
 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client 
 [127.0.0.1]::call
 getCapabilities with () {}
 Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd)
 '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
 Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd)
 SUCCESS: err = ''; rc = 0
 Thread-14::ERROR::2014-05-12
 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
 Traceback (most recent call last):
   File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
 res = f(*args, **kwargs)
   File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
 ret = api.getCapabilities()
   File /usr/share/vdsm/API.py, line 1185, in getCapabilities
 c = caps.get()
   File /usr/share/vdsm/caps.py, line 369, in get
 caps.update(netinfo.get())
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in
 get
 d['nics'][dev.name] = _nicinfo(dev.name, paddr)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in
 _nicinfo
 info = _devinfo(nic)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in
 _devinfo
 ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in
 getIpInfo
 ipv6addrs = devInfo.get_ipv6_addresses()
 SystemError: error return without exception set


 I have two NICs - a wireless NIC which is disabled, and an ethernet NIC
 p3p1 which is statically configured via network-scripts.

 I've also attached the output of ip addr.

 I also notice some disturbing looking messages in the vdsm log during
 setupMultipath, including Panic: Error initializing IRS and then
 subsequent lvm-related errors during StorageRefresh. Those did not abort
 the deployment, however. What do those failures indicate?
 This looks a lot like a new manifestation of:
 https://bugzilla.redhat.com/show_bug.cgi?id=1057772
 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should
 have fixed the that problem.


 I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): 
 vdsm-4.14.6-0.fc19.x86_64

 Should stable be updated with vdsm-4.14.7?
 Can I workaround the problem by using a different repository?

 I even instrumented the code in
 /usr/lib64/python2.7/site-packages/vdsm/netinfo.py

 The device name (p3p1) being passed in is correct (I even tried setting
 the string directly), but the returned object is empty.

 If I start python by hand and run ethtool.get_interfaces_info(p3p1) it
 returns the correct data.

 So it seems as though the code is somehow environmentally sensitive. I'm 
 not
 sure what it is about my environment that would cause issues here however,
 since presumably this is working for others...
 I'm afraid this has recently been tickled by a relase of python-ethtool
 to Fedora 19.

 What is my best workaround? I need to get going again ASAP.

 if it's a python-ethtool issue, try with
 yum downgrade python-ethtool
 if it works, add it to exclusion (in /etc/yum.conf add 
 exclude=python-ethtool) until the issue is fixed.

 Dan, can we have a respin of VDSM once the issue is handled (if it has to be 
 solved vdsm side)?

 If we haven't already a BZ, please open one and make it blocking 3.4.2 
 release, thanks!
 
 The bug has been solved in vdsm-4.14.7, and should have been in
 ovirt-3.4-stable as of the release of ovirt-3.4.1. Sandro, do you know
 why Bob reports that 4.14.6 is still there?
 

ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: 
http://resources.ovirt.org/pub/ovirt-3.4/rpm
Can you point me to the email where he says he has 4.14.6?
That's the version we released with 3.4.0.
Maybe he didn't follow installation 

Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Sandro Bonazzola
Il 12/05/2014 23:53, Bob Doolittle ha scritto:
 On 05/12/2014 02:49 PM, Bob Doolittle wrote:
 Hi,

 I'm trying to set up a fresh system on F19, using oVirt 3.4.

Hi Bob, can you check you're using right repositories in order to get 3.4.1?
See http://www.ovirt.org/OVirt_3.4.1_release_notes
Thanks,




 When running hosted-engine --deploy, it fails during Configuring the 
 management bridge. The ovirt-hosted-engine-setup log shows:

 2014-05-12 13:59:35 INFO 
 otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 
 Configuring the management bridge
 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method 
 exception
 Traceback (most recent call last):
   File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in 
 _executeMethod
 method['method']()
   File 
 /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py,
  line 201, in _misc
 ].s.getVdsCapabilities()['info']['nics'][nics]
 KeyError: 'info'
 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to 
 execute stage 'Misc configuration': 'info'


 The vdsm.log shows:

 Thread-14::DEBUG::2014-05-12 
 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call 
 getCapabilities with () {}
 Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) 
 '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None)
 Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) 
 SUCCESS: err = ''; rc = 0
 Thread-14::ERROR::2014-05-12 
 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error
 Traceback (most recent call last):
   File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper
 res = f(*args, **kwargs)
   File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities
 ret = api.getCapabilities()
   File /usr/share/vdsm/API.py, line 1185, in getCapabilities
 c = caps.get()
   File /usr/share/vdsm/caps.py, line 369, in get
 caps.update(netinfo.get())
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get
 d['nics'][dev.name] = _nicinfo(dev.name, paddr)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in 
 _nicinfo
 info = _devinfo(nic)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in 
 _devinfo
 ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev)
   File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in 
 getIpInfo
 ipv6addrs = devInfo.get_ipv6_addresses()
 SystemError: error return without exception set


 I have two NICs - a wireless NIC which is disabled, and an ethernet NIC 
 p3p1 which is statically configured via network-scripts.

 I've also attached the output of ip addr.

 I also notice some disturbing looking messages in the vdsm log during 
 setupMultipath, including Panic: Error initializing IRS and then subsequent
 lvm-related errors during StorageRefresh. Those did not abort the 
 deployment, however. What do those failures indicate?
 
 This looks a lot like a new manifestation of: 
 https://bugzilla.redhat.com/show_bug.cgi?id=1057772
 
 I even instrumented the code in 
 /usr/lib64/python2.7/site-packages/vdsm/netinfo.py
 
 The device name (p3p1) being passed in is correct (I even tried setting the 
 string directly), but the returned object is empty.
 
 If I start python by hand and run ethtool.get_interfaces_info(p3p1) it 
 returns the correct data.
 
 So it seems as though the code is somehow environmentally sensitive. I'm not 
 sure what it is about my environment that would cause issues here
 however, since presumably this is working for others...
 
 -Bob
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Snapshot removal

2014-05-13 Thread Federico Simoncelli
- Original Message -
 From: Dafna Ron d...@redhat.com
 To: users@ovirt.org
 Sent: Thursday, April 17, 2014 12:52:04 PM
 Subject: Re: [ovirt-users] Snapshot removal
 
 NFS is wipe_after_delete=true always.
 so delete of snapshot will merge the data to upper level image + zero in
 on the data which is why this is taking a long time.

I double checked this and I was very much surprised by this finding!

We need a bz right away, Dafna can file it? Thanks!

-- 
Federico
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Mirrors

2014-05-13 Thread Andrew Lau
Hi,

I was wondering if there were any plans on drumming up an oVirt mirror
down in Australia. It takes me nearly a few hours just to grab all the
required packages to spin up a new box.

Alternatively, the mirror does not seem to support rsync. Is there a
recommended way to sync? (w/o ISOs)

Thanks,
Andrew
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Dan Kenigsberg
On Tue, May 13, 2014 at 12:03:28PM +0200, Sandro Bonazzola wrote:
 Il 13/05/2014 11:50, Dan Kenigsberg ha scritto:
  On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote:
  Il 13/05/2014 00:33, Bob Doolittle ha scritto:

 
  I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): 
  vdsm-4.14.6-0.fc19.x86_64
 
  Should stable be updated with vdsm-4.14.7?
  Can I workaround the problem by using a different repository?

  
 
 ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: 
 http://resources.ovirt.org/pub/ovirt-3.4/rpm
 Can you point me to the email where he says he has 4.14.6?

Look up ^^^ ;-)

 That's the version we released with 3.4.0.
 Maybe he didn't follow installation instructions here: 
 http://www.ovirt.org/OVirt_3.4.1_release_notes

Maybe.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Eyal Edri
Hi,

We have some mirrors up and running for a few universities, not sure any of 
them are in australia though.
david/brian - any chance of contacting an australia university for another 
mirror?

Eyal.

- Original Message -
 From: Andrew Lau and...@andrewklau.com
 To: users users@ovirt.org
 Sent: Tuesday, May 13, 2014 3:13:44 PM
 Subject: [ovirt-users] oVirt Mirrors
 
 Hi,
 
 I was wondering if there were any plans on drumming up an oVirt mirror
 down in Australia. It takes me nearly a few hours just to grab all the
 required packages to spin up a new box.
 
 Alternatively, the mirror does not seem to support rsync. Is there a
 recommended way to sync? (w/o ISOs)
 
 Thanks,
 Andrew
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Andrew Lau
You'd have a good chance with AARNET http://mirror.aarnet.edu.au/

On Tue, May 13, 2014 at 10:41 PM, Eyal Edri ee...@redhat.com wrote:
 Hi,

 We have some mirrors up and running for a few universities, not sure any of 
 them are in australia though.
 david/brian - any chance of contacting an australia university for another 
 mirror?

 Eyal.

 - Original Message -
 From: Andrew Lau and...@andrewklau.com
 To: users users@ovirt.org
 Sent: Tuesday, May 13, 2014 3:13:44 PM
 Subject: [ovirt-users] oVirt Mirrors

 Hi,

 I was wondering if there were any plans on drumming up an oVirt mirror
 down in Australia. It takes me nearly a few hours just to grab all the
 required packages to spin up a new box.

 Alternatively, the mirror does not seem to support rsync. Is there a
 recommended way to sync? (w/o ISOs)

 Thanks,
 Andrew
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Brian Proffitt
I have reached out to a couple of Australian mirror sites to see if they will 
be interested.

Peace,
Brian

- Original Message -
 From: Eyal Edri ee...@redhat.com
 To: Andrew Lau and...@andrewklau.com, David Caro Estevez 
 dcaro...@redhat.com, Brian Proffitt
 bprof...@redhat.com
 Cc: users users@ovirt.org, infra in...@ovirt.org
 Sent: Tuesday, May 13, 2014 8:41:36 AM
 Subject: Re: [ovirt-users] oVirt Mirrors
 
 Hi,
 
 We have some mirrors up and running for a few universities, not sure any of
 them are in australia though.
 david/brian - any chance of contacting an australia university for another
 mirror?
 
 Eyal.
 
 - Original Message -
  From: Andrew Lau and...@andrewklau.com
  To: users users@ovirt.org
  Sent: Tuesday, May 13, 2014 3:13:44 PM
  Subject: [ovirt-users] oVirt Mirrors
  
  Hi,
  
  I was wondering if there were any plans on drumming up an oVirt mirror
  down in Australia. It takes me nearly a few hours just to grab all the
  required packages to spin up a new box.
  
  Alternatively, the mirror does not seem to support rsync. Is there a
  recommended way to sync? (w/o ISOs)
  
  Thanks,
  Andrew
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
  
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Ewoud Kohl van Wijngaarden
Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as
dropping a static file at a well known place with one URL per line. Yum
can do the heavy lifting of determining the fastest mirror.

Additionally I'd really like some clear instructions of how to set up a
mirror and get it published as public mirror.

We should ensure we have GPG-signed packages though. IIRC someone was
working on this. Anyone has more information about this?

On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote:
 I have reached out to a couple of Australian mirror sites to see if they will 
 be interested.
 
 Peace,
 Brian
 
 - Original Message -
  From: Eyal Edri ee...@redhat.com
  To: Andrew Lau and...@andrewklau.com, David Caro Estevez 
  dcaro...@redhat.com, Brian Proffitt
  bprof...@redhat.com
  Cc: users users@ovirt.org, infra in...@ovirt.org
  Sent: Tuesday, May 13, 2014 8:41:36 AM
  Subject: Re: [ovirt-users] oVirt Mirrors
  
  Hi,
  
  We have some mirrors up and running for a few universities, not sure any of
  them are in australia though.
  david/brian - any chance of contacting an australia university for another
  mirror?
  
  Eyal.
  
  - Original Message -
   From: Andrew Lau and...@andrewklau.com
   To: users users@ovirt.org
   Sent: Tuesday, May 13, 2014 3:13:44 PM
   Subject: [ovirt-users] oVirt Mirrors
   
   Hi,
   
   I was wondering if there were any plans on drumming up an oVirt mirror
   down in Australia. It takes me nearly a few hours just to grab all the
   required packages to spin up a new box.
   
   Alternatively, the mirror does not seem to support rsync. Is there a
   recommended way to sync? (w/o ISOs)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Eyal Edri


- Original Message -
 From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl
 To: Brian Proffitt bprof...@redhat.com
 Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra 
 in...@ovirt.org, Andrew Lau
 and...@andrewklau.com
 Sent: Tuesday, May 13, 2014 4:28:30 PM
 Subject: Re: [ovirt-users] oVirt Mirrors
 
 Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as
 dropping a static file at a well known place with one URL per line. Yum
 can do the heavy lifting of determining the fastest mirror.
 
 Additionally I'd really like some clear instructions of how to set up a
 mirror and get it published as public mirror.
 
 We should ensure we have GPG-signed packages though. IIRC someone was
 working on this. Anyone has more information about this?

yes. afaik ovirt 3.4.1 was already released with signed pkg.
sandro/kiril ?

 
 On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote:
  I have reached out to a couple of Australian mirror sites to see if they
  will be interested.
  
  Peace,
  Brian
  
  - Original Message -
   From: Eyal Edri ee...@redhat.com
   To: Andrew Lau and...@andrewklau.com, David Caro Estevez
   dcaro...@redhat.com, Brian Proffitt
   bprof...@redhat.com
   Cc: users users@ovirt.org, infra in...@ovirt.org
   Sent: Tuesday, May 13, 2014 8:41:36 AM
   Subject: Re: [ovirt-users] oVirt Mirrors
   
   Hi,
   
   We have some mirrors up and running for a few universities, not sure any
   of
   them are in australia though.
   david/brian - any chance of contacting an australia university for
   another
   mirror?
   
   Eyal.
   
   - Original Message -
From: Andrew Lau and...@andrewklau.com
To: users users@ovirt.org
Sent: Tuesday, May 13, 2014 3:13:44 PM
Subject: [ovirt-users] oVirt Mirrors

Hi,

I was wondering if there were any plans on drumming up an oVirt mirror
down in Australia. It takes me nearly a few hours just to grab all the
required packages to spin up a new box.

Alternatively, the mirror does not seem to support rsync. Is there a
recommended way to sync? (w/o ISOs)
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Brian Proffitt
That was one on my list...

BKP

- Original Message -
 From: Andrew Lau and...@andrewklau.com
 To: Eyal Edri ee...@redhat.com
 Cc: David Caro Estevez dcaro...@redhat.com, Brian Proffitt 
 bprof...@redhat.com, users users@ovirt.org,
 infra in...@ovirt.org
 Sent: Tuesday, May 13, 2014 8:49:40 AM
 Subject: Re: [ovirt-users] oVirt Mirrors
 
 You'd have a good chance with AARNET http://mirror.aarnet.edu.au/
 
 On Tue, May 13, 2014 at 10:41 PM, Eyal Edri ee...@redhat.com wrote:
  Hi,
 
  We have some mirrors up and running for a few universities, not sure any of
  them are in australia though.
  david/brian - any chance of contacting an australia university for another
  mirror?
 
  Eyal.
 
  - Original Message -
  From: Andrew Lau and...@andrewklau.com
  To: users users@ovirt.org
  Sent: Tuesday, May 13, 2014 3:13:44 PM
  Subject: [ovirt-users] oVirt Mirrors
 
  Hi,
 
  I was wondering if there were any plans on drumming up an oVirt mirror
  down in Australia. It takes me nearly a few hours just to grab all the
  required packages to spin up a new box.
 
  Alternatively, the mirror does not seem to support rsync. Is there a
  recommended way to sync? (w/o ISOs)
 
  Thanks,
  Andrew
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Sandro Bonazzola
Il 13/05/2014 15:31, Eyal Edri ha scritto:
 
 
 - Original Message -
 From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl
 To: Brian Proffitt bprof...@redhat.com
 Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra 
 in...@ovirt.org, Andrew Lau
 and...@andrewklau.com
 Sent: Tuesday, May 13, 2014 4:28:30 PM
 Subject: Re: [ovirt-users] oVirt Mirrors

 Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as
 dropping a static file at a well known place with one URL per line. Yum
 can do the heavy lifting of determining the fastest mirror.

 Additionally I'd really like some clear instructions of how to set up a
 mirror and get it published as public mirror.

 We should ensure we have GPG-signed packages though. IIRC someone was
 working on this. Anyone has more information about this?
 
 yes. afaik ovirt 3.4.1 was already released with signed pkg.
 sandro/kiril ?

Yes, 3.4.1 packages have been signed.
GPG public key is delivered within ovirt-release34 rpm.
About the mirrorlist, I think Ewoud is right, it should be only a matter of 
dropping a static text file with the list
and change yum repo config for pointing to the mirror list.
We'll handle it for next release. Ewoud, do you mind open a BZ on this and make 
it blocker for 3.4.2?

 

 On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote:
 I have reached out to a couple of Australian mirror sites to see if they
 will be interested.

 Peace,
 Brian

 - Original Message -
 From: Eyal Edri ee...@redhat.com
 To: Andrew Lau and...@andrewklau.com, David Caro Estevez
 dcaro...@redhat.com, Brian Proffitt
 bprof...@redhat.com
 Cc: users users@ovirt.org, infra in...@ovirt.org
 Sent: Tuesday, May 13, 2014 8:41:36 AM
 Subject: Re: [ovirt-users] oVirt Mirrors

 Hi,

 We have some mirrors up and running for a few universities, not sure any
 of
 them are in australia though.
 david/brian - any chance of contacting an australia university for
 another
 mirror?

 Eyal.

 - Original Message -
 From: Andrew Lau and...@andrewklau.com
 To: users users@ovirt.org
 Sent: Tuesday, May 13, 2014 3:13:44 PM
 Subject: [ovirt-users] oVirt Mirrors

 Hi,

 I was wondering if there were any plans on drumming up an oVirt mirror
 down in Australia. It takes me nearly a few hours just to grab all the
 required packages to spin up a new box.

 Alternatively, the mirror does not seem to support rsync. Is there a
 recommended way to sync? (w/o ISOs)



-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] gluster performance oVirt 3.4

2014-05-13 Thread Vadims Korsaks
Citējot Humble Devassy Chirammal
humble.deva...@gmail.com :
   
  |
  | Citējot Vijay Bellur vbel...@redhat.com :
  |   On 05/11/2014 02:04 AM, Vadims Korsaks wrote:
  |HI!
  |   
  |Created 2 node setup with oVirt 3.4 and
  | CentOS 6.5, for storage created
  |2 node replicated gluster (3.5) fs on same
  | hosts with oVirt.
  |mount looks like this:
  |127.0.0.1:/gluster01 on
  |   
  |
/rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01
  | type fuse.glusterfs
  |   
  |
(rw,default_permissions,allow_other,max_read=131072)
  |   
  |when i making gluster test with dd,
something
  | like
  |dd if=/dev/zero bs=1M count=2
  |   
  |
of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka
  |i'm gettting speed ~ 110 MB/s, so this is
  | 1Gbps speed of ethernet adapter
  |   
  |but with in VM created in oVirt speed is
  | lower than 20 MB/s
  |   
  |why there is so huge difference?
  |how can improve VMs disks speed?
  |   
  | 
  |   What are your gluster volume settings?
Have you
  | applied the following
  |   performance tunables in gluster's virt
profile:
  | 
  |   eager-lock=enable
  |   remote-dio=enable
  | 
  |   Regards,
  |   Vijay
  | 
  | setting were:
  | [root@centos155 ~]# gluster volume info gluster01
  |
  | Volume Name: gluster01
  | Type: Replicate
  | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
  | Status: Started
  | Number of Bricks: 1 x 2 = 2
  | Transport-type: tcp
  | Bricks:
  | Brick1: 10.2.75.152:/mnt/gluster01/brick
  | Brick2: 10.2.75.155:/mnt/gluster01/brick
  | Options Reconfigured:
  | storage.owner-gid: 36
  | storage.owner-uid: 36
  |
  |
  | add your settings settings now it looks
  |
  | [root@centos155 ~]# gluster volume info gluster01
  |
  | Volume Name: gluster01
  | Type: Replicate
  | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
  | Status: Started
  | Number of Bricks: 1 x 2 = 2
  | Transport-type: tcp
  | Bricks:
  | Brick1: 10.2.75.152:/mnt/gluster01/brick
  | Brick2: 10.2.75.155:/mnt/gluster01/brick
  | Options Reconfigured:
  | network.remote-dio: enable
  | cluster.eager-lock: enable
  | storage.owner-gid: 36
  | storage.owner-uid: 36
  |
  |
  | but this didn't affected performace in any
big way
  | should hosts to be restarted?
  |
  
  glusterfs storage domain configuration GUI got
Optimize for virt. store option which have to
be enabled when configuring for virt store.
  
 
Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain
  
  If the configuration is manual,  you need to
set the group to 'virt' as shown below
  
  #gluster volume set VOLNAME group virt
  
  This will enable below options on gluster volume :
  
  quick-read=off
  read-ahead=off
  io-cache=off
  stat-prefetch=off
  eager-lock=enable
  remote-dio=on
  
  
  Can you please make sure group has set properly ?
  
  Also, invoke  dd with oflag=direct option and
check whether it helps ..
  
  
  --Humble

tnx a lot!! now it's much better - from VM i can
get dd with ~ 60 MB/s
this is still ~ x2 lower than from host, but x3
better than it was before :)

BTW could not found GUI got Optimize for virt.
store option  in oVirt 3.5

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Gianluca Cecchi
On Thu, May 8, 2014 at 11:40 PM, Gianluca Cecchi
gianluca.cec...@gmail.comwrote:


 On May 8, 2014 11:01 PM, Einav Cohen eco...@redhat.com wrote:
 
  Hi Lukas, we don't have Italian supported in oVirt.
 
  In order to have that, we need first to translate all
  relevant strings to Italian.
 
  We manage the ovirt-engine string translations in
  the 'oVirt' project in Zanata:
  https://translate.zanata.org/zanata/project/view/ovirt
 
  in order to contribute translations to this project,
  you need to become a translator - instructions can be
  found in the Translators section in the Zanata home
  page: https://translate.zanata.org/zanata/
 
  
  Thanks,
  Einav

 I'm interested in helping with italian translation too.
 In the mean time I created an account on zanata using my FAS account and
 asked to join the Italian translators team.

 Gianluca


Hello,
today it seems I was given right to join the Italian translators' team on
Zanata (I see myself as one of the team members).
What is the next step?
I'm following
https://github.com/zanata/zanata-server/wiki/Opening-a-Translation-Project
but I don't see a link to translate oVirt in Italian
Is it responsibility of one of oVirt project maintainers to allow me to
create an it branch?

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Mirrors

2014-05-13 Thread Ewoud Kohl van Wijngaarden
On Tue, May 13, 2014 at 03:41:57PM +0200, Sandro Bonazzola wrote:
 Il 13/05/2014 15:31, Eyal Edri ha scritto:
  
  
  - Original Message -
  From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl
  To: Brian Proffitt bprof...@redhat.com
  Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra 
  in...@ovirt.org, Andrew Lau
  and...@andrewklau.com
  Sent: Tuesday, May 13, 2014 4:28:30 PM
  Subject: Re: [ovirt-users] oVirt Mirrors
 
  Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as
  dropping a static file at a well known place with one URL per line. Yum
  can do the heavy lifting of determining the fastest mirror.
 
  Additionally I'd really like some clear instructions of how to set up a
  mirror and get it published as public mirror.
 
  We should ensure we have GPG-signed packages though. IIRC someone was
  working on this. Anyone has more information about this?
  
  yes. afaik ovirt 3.4.1 was already released with signed pkg.
  sandro/kiril ?
 
 Yes, 3.4.1 packages have been signed.
 GPG public key is delivered within ovirt-release34 rpm.
 About the mirrorlist, I think Ewoud is right, it should be only a matter of 
 dropping a static text file with the list
 and change yum repo config for pointing to the mirror list.
 We'll handle it for next release. Ewoud, do you mind open a BZ on this and 
 make it blocker for 3.4.2?

I opened https://bugzilla.redhat.com/show_bug.cgi?id=1097307 for this. I
did not see a relevant component to select though.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Einav Cohen
 - Original Message -
 From: Gianluca Cecchi gianluca.cec...@gmail.com
 Sent: Tuesday, May 13, 2014 10:03:51 AM
 
 On Thu, May 8, 2014 at 11:40 PM, Gianluca Cecchi  gianluca.cec...@gmail.com
  wrote:
 
 
 
 
 
 
 On May 8, 2014 11:01 PM, Einav Cohen  eco...@redhat.com  wrote:
  
  Hi Lukas, we don't have Italian supported in oVirt.
  
  In order to have that, we need first to translate all
  relevant strings to Italian.
  
  We manage the ovirt-engine string translations in
  the 'oVirt' project in Zanata:
  https://translate.zanata.org/zanata/project/view/ovirt
  
  in order to contribute translations to this project,
  you need to become a translator - instructions can be
  found in the Translators section in the Zanata home
  page: https://translate.zanata.org/zanata/
  
  
  Thanks,
  Einav
 
 
 I'm interested in helping with italian translation too.
 In the mean time I created an account on zanata using my FAS account and
 asked to join the Italian translators team.

you need to request that from one of the maintainers of the 
oVirt Zanata project: http://i.imgur.com/K36FrPQ.png
luckily for you, I am one of them :)  Italian is now added. 

 
 Gianluca
 
 Hello,
 today it seems I was given right to join the Italian translators' team on
 Zanata (I see myself as one of the team members).
 What is the next step?
 I'm following
 https://github.com/zanata/zanata-server/wiki/Opening-a-Translation-Project
 but I don't see a link to translate oVirt in Italian
 Is it responsibility of one of oVirt project maintainers to allow me to
 create an it branch?
 
 Gianluca
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] update vm in a pool

2014-05-13 Thread nicola gentile
Good morning,
I am new user, and I would ask you an information.
I have installed ovirt 3.4.
I created a pool with 3 vm, too.

I should add software to 3 vm how I must proceed?
1) I must delete the vm from pool, and than add the software and then
recreate the pool?
2) or there are other solution?

Thank you a lot.

ng
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] My presentation and first question - RAM limit 64000MB

2014-05-13 Thread Fagner Patricio
Hello Everybody

My name is Fagner Patrício and i am new in the list, I am from Brazil and I
am a network admin of a public institution of my state.

I have a first question, a few months ago i installed a oVirt enviroment
and so far so good, but last week we received a big data application with
big RAM needs, about 96GB. So i created a virtual machine with this RAM
configuration, but when a start, it report a error, that my limit o RAM per
machine is between 1024MB and 64000MB.

How can i change this limits?

My oVirt is version 3.3 of compatibility.

-- 
Fagner Patrício
João Pessoa - PB
Brasil
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Gianluca Cecchi
On Tue, May 13, 2014 at 4:51 PM, Einav Cohen eco...@redhat.com wrote:


 luckily for you, I am one of them :)  Italian is now added.


;-)

ok, started with messages part...
is it correct that I can translate only oVirt master branch (and rhevm
ones)? Will it be automatically applied to 3.4 too?
If I have a 3.4.1 environment can I then easily apply my translation over
so that I can check with real application?

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] My presentation and first question - RAM limit 64000MB

2014-05-13 Thread Gianluca Cecchi
On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio
fagner.patri...@gmail.comwrote:

 Hello Everybody

 My name is Fagner Patrício and i am new in the list, I am from Brazil and
 I am a network admin of a public institution of my state.

 I have a first question, a few months ago i installed a oVirt enviroment
 and so far so good, but last week we received a big data application with
 big RAM needs, about 96GB. So i created a virtual machine with this RAM
 configuration, but when a start, it report a error, that my limit o RAM per
 machine is between 1024MB and 64000MB.

 How can i change this limits?

 My oVirt is version 3.3 of compatibility.


Possibly stupid question: how much physical ram do you have on your oVirt
Hypervisor?

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] My presentation and first question - RAM limit 64000MB

2014-05-13 Thread Fagner Patricio
Hello Cecchi.

I Have 192GB in my oVirt Hypervisor.


2014-05-13 12:57 GMT-03:00 Gianluca Cecchi gianluca.cec...@gmail.com:

 On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio 
 fagner.patri...@gmail.com wrote:

 Hello Everybody

 My name is Fagner Patrício and i am new in the list, I am from Brazil and
 I am a network admin of a public institution of my state.

 I have a first question, a few months ago i installed a oVirt enviroment
 and so far so good, but last week we received a big data application with
 big RAM needs, about 96GB. So i created a virtual machine with this RAM
 configuration, but when a start, it report a error, that my limit o RAM per
 machine is between 1024MB and 64000MB.

 How can i change this limits?

 My oVirt is version 3.3 of compatibility.


 Possibly stupid question: how much physical ram do you have on your oVirt
 Hypervisor?

 Gianluca




-- 
Fagner Patrício
João Pessoa - PB
Brasil
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Bob Doolittle
I think I did in fact start with the wrong ovirt-release RPM, and 
consequently the wrong repos.


I have started over as specified in the 3.4.1 release notes (fresh 
Fedora 19 install, yum localinstall 
http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm).


Now I am encountering a different issue during the same step, but I'll 
start a new e-mail thread for clarity.


Thanks,
Bob

On 05/13/2014 08:24 AM, Dan Kenigsberg wrote:

On Tue, May 13, 2014 at 12:03:28PM +0200, Sandro Bonazzola wrote:

Il 13/05/2014 11:50, Dan Kenigsberg ha scritto:

On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote:

Il 13/05/2014 00:33, Bob Doolittle ha scritto:

I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): 
vdsm-4.14.6-0.fc19.x86_64

Should stable be updated with vdsm-4.14.7?
Can I workaround the problem by using a different repository?

ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: 
http://resources.ovirt.org/pub/ovirt-3.4/rpm
Can you point me to the email where he says he has 4.14.6?

Look up ^^^ ;-)


That's the version we released with 3.4.0.
Maybe he didn't follow installation instructions here: 
http://www.ovirt.org/OVirt_3.4.1_release_notes

Maybe.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] New problem with hosted-engine during Configuring the management bridge

2014-05-13 Thread Bob Doolittle

Hi,

I have started a new installation as specified in the 3.4.1 release 
notes (fresh Fedora 19 install, yum localinstall 
http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm).


This is failing in the step Configuring the management bridge.

Based on the vdsm.log, it appears I am hitting:
*Bug 988995* https://bugzilla.redhat.com/show_bug.cgi?id=988995 -vdsm 
multipath.py restarts mutipathd, cutting the branch vdsm sits on


multipath -F is returning invalid keyword: getuid_callout and it 
appears that this is causing vdsm-tool to abort (although the command 
exit status is 0 and the bug report says that those are only harmless 
warnings).


There is no workaround stated in that bug report.

Help?

-Bob

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)

2014-05-13 Thread R P Herrold
On Tue, 13 May 2014, Sven Kieske wrote:

 Doesn't this make you wonder where the minimum requirements come from?
 
 If it runs with less than 1 GB RAM, why do the docs say you need 4 GB
 and recommend even 16 GB ?

certainly a fair question ... There is also a statement in 
that setup script as to needed filesystem space which seems to 
have been simply 'pulled out of the air', rather than 
documented / explained
 
 Is it just a matter of scale(number of vms/hosts/DCs) ?
 What would make engine consume more RAM?
 
 Can you maybe lower the minimum requirements?

Or isolate the recommendations to a flat file which is 
commented, and sourced by the script, so a person can discern 
the difference between 'hard' requirements, and simple 
'recommendations' for a stated use case

-- Russ herrold
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] AllInOne

2014-05-13 Thread suporte
Hi, 

I'm trying to install ovirt AllnOne, following these steps: 
Install FC19 
yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm 
yum install yum-utils 
yum-config-manager --enable ovirt-3.4 
yum-config-manager --enable fedora-virt-preview 
yum-config-manager --enable ovirt-epel 
yum install epel-release 



yum -y update 


yum -y install ovirt-engine 


engine-setup 




When asked Configure VDSM on this host?, I answered yes 




rpm -qa|grep vdsm 
vdsm-xmlrpc-4.14.6-0.fc19.noarch 
vdsm-python-zombiereaper-4.14.6-0.fc19.noarch 
vdsm-4.14.6-0.fc19.x86_64 
vdsm-cli-4.14.6-0.fc19.noarch 
vdsm-python-4.14.6-0.fc19.x86_64 






Now I can access to the Administration Portal, but cannot start the local Hots, 
allways get this message: 



Host's Compatibility Version doesn't match the Cluster's Compatibility Version. 




Host local_host is installed with VDSM version (Non interactive user) and 
cannot join cluster local_cluster which is compatible with VDSM versions [4.13, 
4.14, 4.9, 4.11, 4.12, 4.10]. 







What can I do to fix it? 





Thanks 






-- 

Jose Ferradeira 
http://www.logicworks.pt 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] My presentation and first question - RAM limit 64000MB

2014-05-13 Thread Gianluca Cecchi
Il 13/mag/2014 18:15 Fagner Patricio fagner.patri...@gmail.com ha
scritto:

 Hello Cecchi.

 I Have 192GB in my oVirt Hypervisor.


 2014-05-13 12:57 GMT-03:00 Gianluca Cecchi gianluca.cec...@gmail.com:

 On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio 
fagner.patri...@gmail.com wrote:

 Hello Everybody

 My name is Fagner Patrício and i am new in the list, I am from Brazil
and I am a network admin of a public institution of my state.

 I have a first question, a few months ago i installed a oVirt
enviroment and so far so good, but last week we received a big data
application with big RAM needs, about 96GB. So i created a virtual machine
with this RAM configuration, but when a start, it report a error, that my
limit o RAM per machine is between 1024MB and 64000MB.

 How can i change this limits?

 My oVirt is version 3.3 of compatibility.


 Possibly stupid question: how much physical ram do you have on your
oVirt Hypervisor?

 Gianluca




 --
 Fagner Patrício
 João Pessoa - PB
 Brasil

 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

Could it be that for some reason the guest is configured as 32bit?
Because in that case the limit should be indeed 64gb if guest is
supporting pae, otherwise probably 4gb.
How did you configure your guest os?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Einav Cohen
 - Original Message -
 From: Gianluca Cecchi gianluca.cec...@gmail.com
 Sent: Tuesday, May 13, 2014 11:16:47 AM
 
 On Tue, May 13, 2014 at 4:51 PM, Einav Cohen  eco...@redhat.com  wrote:
 
 
 
 
 luckily for you, I am one of them :) Italian is now added.
 
 ;-)
 
 ok, started with messages part...
 is it correct that I can translate only oVirt master branch (and rhevm ones)?
 Will it be automatically applied to 3.4 too?

every version in Zanata tracks the translation for a different ovirt-engine
code-branch:
the 'master' version in Zanata is tracking the translation for the 'master' 
branch in ovirt-engine's code repo. therefore the 'master' version should 
*always* be kept up-to-date with regards to translations. 
the 'ovirt-3.4' version in Zanata is tracking the translation for the 'ovirt-
engine-3.4' branch. 
AFAIK, the ovirt-engine-3.4.1 code was already branched out of 
ovirt-engine-3.4, 
therefore we will need to create an 'ovirt-3.4.1' version in Zanata if we would 
like to track translations specifically for ovirt 3.4.1 (the 'ovirt-engine-3.4' 
code branch is now the baseline for ovirt-engine-3.4.2, AFAIK). 

we are typically not updating translations for versions that were already 
GA'd (3.4), therefore I recommend to concentrate at this point only on the 
'master' version (which is currently tracking the ovirt-engine-3.5 
translations, 
practically). 

once we will branch the ovirt-engine-3.5 code out of the 'master' code branch, 
I will create an 'ovirt-3.5' version in Zanata, to track the ovirt-engine-3.5 
translations. the 'master' version will remain the translation tracker for the 
'master' code branch [which would practically become the baseline for the next 
ovirt-engine planned release (ovirt-3.6?)]. 
from that point on, translations which we want to land in ovirt-3.5 will need 
to be updated in both the 'master' version and the 'ovirt-3.5' version in 
Zanata 
(very similar to code patches: once we branch out, if we want a certain piece 
of code to land in ovirt-3.5, we will need to fix it in 'master' as well as in 
the 'ovirt-engine-3.5' branch). 

 If I have a 3.4.1 environment can I then easily apply my translation over so
 that I can check with real application?

again, doing translations specifically for 3.4.1 is problematic, as I explained 
above; I recommend working on a 'master'-based environment. 
in order to apply your translations, a regular ovirt environment is not enough 
- 
you will need a development environment, since the GUI code needs to be 
re-compiled with the new locale to make that new locale available in the GUI. 

 
 Gianluca
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Gianluca Cecchi
OK, thanks for explaining.
If a sentence is completely equal in English and Italian (eg ovirt engine),
can I leave it blanck or must I fill it with something?
In case of no translation for a sentence what would be behaviour during use
with that localization: English will be automatically put in or an error
shown to the user or what?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Hitachi hus110 and ovirt

2014-05-13 Thread Dan Yasny
Hi all

I wonder if anyone has a working setup with a HDS device. Right now I am
seeing a weird performance issue.
With default multipath settings dd of zeros into the /dev/mapper lun shows
at 0.2kbps while writing directly into a single path at /dev/sdb provides
900Mbps.

I am using 10g iscsi with 4 ports on the HDS and dual port cnas on the hosts

Thanks
Dan
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] italian language pack ?

2014-05-13 Thread Einav Cohen
 - Original Message -
 From: Gianluca Cecchi gianluca.cec...@gmail.com
 Sent: Tuesday, May 13, 2014 12:57:25 PM
 
 
 
 OK, thanks for explaining.
 If a sentence is completely equal in English and Italian (eg ovirt engine),
 can I leave it blanck or must I fill it with something?

you can leave it untranslated or copy-paste the English string into the Italian 
translation - the result should be the same (English string displayed in GUI). 

It is recommended to copy the translation rather than leaving it untranslated, 
since leaving it untranslated will affect the statistics of the translation 
completeness (i.e. even if the translation is actually 100% complete, it will 
not be shown as 100% if strings were left untranslated, even deliberately). 

if you will leave the translation blank but mark it as 'translated' (so 
statistics are not affected), there is a good chance that the GUI will simply 
display a blank text as the translation, rather than the English text, so 
need to be careful with that.  

 In case of no translation for a sentence what would be behaviour during use
 with that localization: English will be automatically put in or an error
 shown to the user or what?

missing translations will result in displaying the corresponding English 
string instead. 

 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Video Acceleration

2014-05-13 Thread Maurice James

Does anyone know if 3D acceleration is available or will be available in ovirt? 
https://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_enabling_vm.html 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge

2014-05-13 Thread Dan Kenigsberg
On Tue, May 13, 2014 at 12:07:09PM +0200, Sandro Bonazzola wrote:
 Il 12/05/2014 23:53, Bob Doolittle ha scritto:
  On 05/12/2014 02:49 PM, Bob Doolittle wrote:
  Hi,
 
  I'm trying to set up a fresh system on F19, using oVirt 3.4.
 
 Hi Bob, can you check you're using right repositories in order to get 3.4.1?
 See http://www.ovirt.org/OVirt_3.4.1_release_notes
 Thanks,

I now see that EPEL6 still has 4.14.6 in its stable repo.
Douglas - can you push 4.14.8 ASAP?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)

2014-05-13 Thread John Taylor
I've seen a similar problem (404 on webadmin) on my 4GB physical ovirt
engine box, but it turned out to be the jboss timeout in deployment
Relevant bz  https://bugzilla.redhat.com/show_bug.cgi?format=multipleid=1078291

so it might have been that it wasn't a memory limit in the OP that
caused failure, but the time it took jboss to deploy

-John

On Tue, May 13, 2014 at 12:31 PM, R P Herrold herr...@owlriver.com wrote:
 On Tue, 13 May 2014, Sven Kieske wrote:

 Doesn't this make you wonder where the minimum requirements come from?

 If it runs with less than 1 GB RAM, why do the docs say you need 4 GB
 and recommend even 16 GB ?

 certainly a fair question ... There is also a statement in
 that setup script as to needed filesystem space which seems to
 have been simply 'pulled out of the air', rather than
 documented / explained

 Is it just a matter of scale(number of vms/hosts/DCs) ?
 What would make engine consume more RAM?

 Can you maybe lower the minimum requirements?

 Or isolate the recommendations to a flat file which is
 commented, and sourced by the script, so a person can discern
 the difference between 'hard' requirements, and simple
 'recommendations' for a stated use case

 -- Russ herrold
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Video Acceleration

2014-05-13 Thread Antoni Segura Puimedon


- Original Message -
 From: Maurice James mja...@media-node.com
 To: users users@ovirt.org
 Sent: Tuesday, May 13, 2014 7:40:01 PM
 Subject: [ovirt-users] Video Acceleration
 
 
 Does anyone know if 3D acceleration is available or will be available in
 ovirt?

It is not available but leveraging http://virgil3d.github.io/ it might be
at some point in the future.

 https://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_enabling_vm.html
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Unable to make Single Sign on working on Windows 7 Guest

2014-05-13 Thread Felipe Herrera Martinez
Thanks Vinzenz for your reply,
  we have just installed 3.5 and is working.. seems the fix has finally 
corrected SSO issue for Windows guest.

BRgds,
  F.

On May 12, 2014, at 9:21 AM, Vinzenz Feenstra wrote:

 On 05/11/2014 11:59 PM, Felipe Herrera Martinez wrote:
 I haven't seen any fix on this. I would be more than interested to know the 
 fix if any.
 I have posted a change in this regard to the ovirt engine frontend to send 
 the login request always. This change was merged to the master branch of 
 ovirt engine. (for ovirt 3.5)
 Additionally I made a second change to vdsm that it decides when to forward 
 the login request when the guest agent is responsive. This change is 
 currently still pending.
 
 I am sorry that I did not respond to you mail. I was rather immediately 
 taking an action to having this addressed as this was the second time 
 somebody mentions this limitation.
 
 Unfortunately there's no real quick fix at the moment where I am certain that 
 it works. In theory it should be enough to have an uninstall application 
 entry in the registry for the RHEV Agent, however this is not a good thing 
 and therefore I went with a different solution to avoid such kind of problems 
 in future.
 
 
 
 Thanks in advance,
Felipe
 
 On May 11, 2014, at 11:15 PM, Itamar Heim wrote:
 
 On 04/29/2014 07:40 PM, Felipe Herrera Martinez wrote:
 
 On the case I'll be able to create an installer, what is the name of the 
 Application need to be there, in order to ovirt detects that Ovirt Guest 
 agent is installed?
 
 I have created an installer adding OvirtGuestService files and the 
 Product Name to be shown, a part of the command line post installs..
 
 I have tried with ovirt-guest-agent and Ovirt guest agent Names for 
 the application installed on Windows 7 guest and even both are presented 
 on ovirt VM Applications tab,
 on any case LogonVDScommand appears.
 
 
 There is other option to make it work now?
 
 Thanks in advance,
   Felipe
 
 
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
 i didn't see a reply to this. I think the validation for guest agent to be 
 installed was removed recently though.
 
 
 


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] My presentation and first question - RAM limit 64000MB

2014-05-13 Thread Itamar Heim

On 05/13/2014 11:07 AM, Fagner Patricio wrote:

Hello Everybody

My name is Fagner Patrício and i am new in the list, I am from Brazil
and I am a network admin of a public institution of my state.

I have a first question, a few months ago i installed a oVirt enviroment
and so far so good, but last week we received a big data application
with big RAM needs, about 96GB. So i created a virtual machine with this
RAM configuration, but when a start, it report a error, that my limit o
RAM per machine is between 1024MB and 64000MB.

How can i change this limits?

My oVirt is version 3.3 of compatibility.

--
Fagner Patrício
João Pessoa - PB
Brasil


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



which version of 3.3? this should have been fixed in 3.3.2
http://www.ovirt.org/OVirt_3.3.2_release_notes
BZ 1014952 - [admin portal] cannot add Windows VM with 512MB memory, or 
more than 64GB

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] AllInOne

2014-05-13 Thread Itamar Heim

On 05/13/2014 12:38 PM, supo...@logicworks.pt wrote:

Hi,

I'm trying to install ovirt AllnOne, following these steps:
Install FC19
yum localinstall
http://resources.ovirt.org/releases/ovirt-release.noarch.rpm
yum install yum-utils
yum-config-manager --enable ovirt-3.4
yum-config-manager --enable fedora-virt-preview
yum-config-manager --enable ovirt-epel
yum install epel-release

yum -y update

yum -y install ovirt-engine

engine-setup


When asked Configure VDSM on this host?, I answered yes


  rpm -qa|grep vdsm
vdsm-xmlrpc-4.14.6-0.fc19.noarch
vdsm-python-zombiereaper-4.14.6-0.fc19.noarch
vdsm-4.14.6-0.fc19.x86_64
vdsm-cli-4.14.6-0.fc19.noarch
vdsm-python-4.14.6-0.fc19.x86_64



Now I can access to the Administration Portal, but cannot start the
local Hots, allways get this message:

Host's Compatibility Version doesn't match the Cluster's Compatibility
Version.

Host local_host is installed with VDSM version (Non interactive user)
and cannot join cluster local_cluster which is compatible with VDSM
versions [4.13, 4.14, 4.9, 4.11, 4.12, 4.10].


What can I do to fix it?


Thanks



--

Jose Ferradeira
http://www.logicworks.pt



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



anything in engine log?
(similar log error in this bug:)
Bug 1052314 - [RHEVM] cannot put 3.3 host into maintenance after failed 
addition to 3.4 cluster

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] update vm in a pool

2014-05-13 Thread Itamar Heim

On 05/13/2014 11:00 AM, nicola gentile wrote:

Good morning,
I am new user, and I would ask you an information.
I have installed ovirt 3.4.
I created a pool with 3 vm, too.

I should add software to 3 vm how I must proceed?
1) I must delete the vm from pool, and than add the software and then
recreate the pool?
2) or there are other solution?

Thank you a lot.

ng
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



do you want to use the VMs as stateless or statefull?
did you use the pool to assign a single vm per user from user portal, or 
just to create a bunch of similar VMs?


3.4 has template versions, so you can create a new version of the 
template, and next time you shutdown/start the VMs, they will rebase to 
latest version of the template if pool is so defined.


you can also install the application on the VM after you start it as an 
admin (which doesn't create the stateless snapshot by default like when 
a user starts the pool'd vm from the user portal).

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

2014-05-13 Thread Ricardo Esteves
In attachment follows the defaults and the modified versions of the nodes files.

-Original Message-
From: Federico Simoncelli [mailto:fsimo...@redhat.com] 
Sent: terça-feira, 13 de Maio de 2014 08:58
To: Ricardo Esteves
Cc: users@ovirt.org
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

- Original Message -
 From: Ricardo Esteves ricardo.m.este...@gmail.com
 To: users@ovirt.org
 Sent: Friday, April 11, 2014 1:07:31 AM
 Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
 
 Hi,
 
 I've put my host on maintenance, then i configured iscsi offload for 
 my broadcom cards changing target's file's (192.168.12.2,3260 and
 192.168.12.4,3260) in my node
 iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface 
 bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations 
 are back to default.

Can you share the changes you made? Thanks.

--
Federico


iscsi_nodes_default.tar.bz2
Description: Binary data


iscsi_nodes_modified.tar.bz2
Description: Binary data
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbee questions

2014-05-13 Thread Itamar Heim

On 05/13/2014 05:22 AM, Sven Kieske wrote:

Am 13.05.2014 11:12, schrieb Dan Kenigsberg:

If you are planning to run only a couple of VMs on a single laptop,
going to basics and using qemu/libvirt directly, or gnome-boxes, would
make sense.

If you plan to manage a multitude of hosts, then the benefits of oVirt
comes to play.


In the long run, it would be a huge achievement to utilize ovirt
even for little vm workloads, especially if you want to compete
with vmware.

I know one size never fits all but I guess ovirt could very well
be improved for single host management as well.



single host management is not the same as roaming laptop with wireless...
all-in-one and hosted engine should provide a decent solution for single 
host management - what are the gaps?

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

2014-05-13 Thread Ricardo Esteves
In attachment follows the defaults and the modified versions of the nodes files.

-Original Message-
From: Federico Simoncelli [mailto:fsimo...@redhat.com]
Sent: terça-feira, 13 de Maio de 2014 08:58
To: Ricardo Esteves
Cc: users@ovirt.org
Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

- Original Message -
 From: Ricardo Esteves ricardo.m.este...@gmail.com
 To: users@ovirt.org
 Sent: Friday, April 11, 2014 1:07:31 AM
 Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
 
 Hi,
 
 I've put my host on maintenance, then i configured iscsi offload for 
 my broadcom cards changing target's file's (192.168.12.2,3260 and
 192.168.12.4,3260) in my node
 iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface 
 bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations 
 are back to default.

Can you share the changes you made? Thanks.

--
Federico


iscsi_nodes_default.tar.bz2
Description: Binary data


iscsi_nodes_modified.tar.bz2
Description: Binary data
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cluster emulation mode issue

2014-05-13 Thread Itamar Heim

On 05/13/2014 08:46 PM, Doug Bishop wrote:

Hope someone can help. I have been fighting this for the past day or so. I have 
a fresh install of ovirt-engine 3.4 all is working except when I try and add a 
newly provisioned host with Centos 6.5. I get the following:



Custom Event ID: -1, Message: Host ovirt-vmtest does not comply with the 
cluster Default emulated machines. The Hosts emulated machines are 
rhel6.4.0,pc,rhel6.3.0,rhel6.2.0,rhel6.1.0,rhel6.0.0,rhel5.5.0,rhel5.4.4,rhel5.4.0
 and the cluster is [rhel6.5.0, pc-1.0, pseries]}

The above error shows up right after the machine is finished installing. Im 
sure there is something simple I am missing but at the moment I have no idea. 
Attached is my host-deploy log.

For those that can help thanks again!

Doug Bishop
Sr. Systems Engineer
dbis...@controlscan.com

Controlscan, Inc.
11475 Great Oaks Way, Suite 300
Alpharetta, GA 30022
www.controlscan.com

NOTICE:  This e-mail message, including any attachments, is for the sole use of 
the intended recipient(s) or entity and may contain sensitive information that 
is confidential, proprietary, privileged or otherwise protected by law. Any 
unauthorized review, use, disclosure, distribution, copying or other use of, or 
taking of any action in reliance upon, is strictly prohibited. If you are not 
the intended recipient, please contact the sender by reply e-mail and destroy 
all copies of this message. This e-mail is and any response to it will be 
unencrypted and, therefore, potentially unsecure.  The recipient should check 
this email and any attachments for the presence of viruses/malware according to 
security best practices.  Thank you.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



that is very strange. what does running 'qemu-kvm -M ?' shows?
(and just to make sure, running 'qemu-kvm-rhev -M ?' as well)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cluster emulation mode issue

2014-05-13 Thread Doug Bishop
Here ya go :

[root@ovirt-vmtest ~]# /usr/libexec/qemu-kvm -M ?
Supported machines are:
pc RHEL 6.4.0 PC (alias of rhel6.4.0)
rhel6.4.0  RHEL 6.4.0 PC (default)
rhel6.3.0  RHEL 6.3.0 PC
rhel6.2.0  RHEL 6.2.0 PC
rhel6.1.0  RHEL 6.1.0 PC
rhel6.0.0  RHEL 6.0.0 PC
rhel5.5.0  RHEL 5.5.0 PC
rhel5.4.4  RHEL 5.4.4 PC
rhel5.4.0  RHEL 5.4.0 PC

qemu-kvm-rhev -M ? isn’t working The package is installed but the binary isn’t 
on the machine anywhere.

Doug Bishop
Sr. Systems Engineer
ControlScan, Inc.
Phone: tel://Phone:%20678-279-2659 678-848-6658
Fax: 1-800-825-2207tel://Fax:%201-800-825-2207
dbis...@controlscan.comhttp://mailto:dbis...@controlscan.com
www.ControlScan.comhttp://www.controlscan.com/

Follow ControlScan:  [cid:32D897E8-DA68-4BAE-8295-04CD1B9C4173] 
https://www.facebook.com/ControlScan  
[cid:C4DDA60C-7948-4B2D-96A7-E22979FBA8F7] http://twitter.com/ControlScan  
[cid:090C41F2-3F31-4EC1-BF48-E334D38A2DD8] 
http://www.linkedin.com/groups?about=gid=2181227trk=anet_ug_grppr 
[cid:9FCE4B8D-1225-4A2D-AC6A-94852AA9ED98] http://google.com/+Controlscan

 [cid:A6CC9822-5370-40C1-B667-522DE25B933C] http://www.pcicomplianceguide.org/


On May 13, 2014 at 8:55:28 PM, Itamar Heim 
(ih...@redhat.commailto:ih...@redhat.com) wrote:

On 05/13/2014 08:46 PM, Doug Bishop wrote:
 Hope someone can help. I have been fighting this for the past day or so. I 
 have a fresh install of ovirt-engine 3.4 all is working except when I try and 
 add a newly provisioned host with Centos 6.5. I get the following:



 Custom Event ID: -1, Message: Host ovirt-vmtest does not comply with the 
 cluster Default emulated machines. The Hosts emulated machines are 
 rhel6.4.0,pc,rhel6.3.0,rhel6.2.0,rhel6.1.0,rhel6.0.0,rhel5.5.0,rhel5.4.4,rhel5.4.0
  and the cluster is [rhel6.5.0, pc-1.0, pseries]}

 The above error shows up right after the machine is finished installing. Im 
 sure there is something simple I am missing but at the moment I have no idea. 
 Attached is my host-deploy log.

 For those that can help thanks again!

 Doug Bishop
 Sr. Systems Engineer
 dbis...@controlscan.com

 Controlscan, Inc.
 11475 Great Oaks Way, Suite 300
 Alpharetta, GA 30022
 www.controlscan.com

 NOTICE: This e-mail message, including any attachments, is for the sole use 
 of the intended recipient(s) or entity and may contain sensitive information 
 that is confidential, proprietary, privileged or otherwise protected by law. 
 Any unauthorized review, use, disclosure, distribution, copying or other use 
 of, or taking of any action in reliance upon, is strictly prohibited. If you 
 are not the intended recipient, please contact the sender by reply e-mail and 
 destroy all copies of this message. This e-mail is and any response to it 
 will be unencrypted and, therefore, potentially unsecure. The recipient 
 should check this email and any attachments for the presence of 
 viruses/malware according to security best practices. Thank you.



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


that is very strange. what does running 'qemu-kvm -M ?' shows?
(and just to make sure, running 'qemu-kvm-rhev -M ?' as well)


NOTICE: This e-mail message, including any attachments, is for the sole use of 
the intended recipient(s) or entity and may contain sensitive information that 
is confidential, proprietary, privileged or otherwise protected by law. Any 
unauthorized review, use, disclosure, distribution, copying or other use of, or 
taking of any action in reliance upon, is strictly prohibited. If you are not 
the intended recipient, please contact the sender by reply e-mail and destroy 
all copies of this message. This e-mail is and any response to it will be 
unencrypted and, therefore, potentially unsecure. The recipient should check 
this email and any attachments for the presence of viruses/malware according to 
security best practices. Thank you.


image001.jpg@01CF5D78.4B809390
Description: image001.jpg@01CF5D78.4B809390


image002.jpg@01CF5D78.4B809390
Description: image002.jpg@01CF5D78.4B809390


image003.jpg@01CF5D78.4B809390
Description: image003.jpg@01CF5D78.4B809390


image004.png@01CF5D78.4B809390
Description: image004.png@01CF5D78.4B809390


image005.jpg@01CF5D78.4B809390
Description: image005.jpg@01CF5D78.4B809390
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] gluster performance oVirt 3.4

2014-05-13 Thread Sahina Bose


On 05/13/2014 07:27 PM, Vadims Korsaks wrote:

Citējot Humble Devassy Chirammal
humble.deva...@gmail.com :
   
  |

  | Citējot Vijay Bellur vbel...@redhat.com :
  |   On 05/11/2014 02:04 AM, Vadims Korsaks wrote:
  |HI!
  |   
  |Created 2 node setup with oVirt 3.4 and
  | CentOS 6.5, for storage created
  |2 node replicated gluster (3.5) fs on same
  | hosts with oVirt.
  |mount looks like this:
  |127.0.0.1:/gluster01 on
  |   
  |

/rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01

  | type fuse.glusterfs
  |   
  |

(rw,default_permissions,allow_other,max_read=131072)

  |   
  |when i making gluster test with dd,

something

  | like
  |dd if=/dev/zero bs=1M count=2
  |   
  |

of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka

  |i'm gettting speed ~ 110 MB/s, so this is
  | 1Gbps speed of ethernet adapter
  |   
  |but with in VM created in oVirt speed is
  | lower than 20 MB/s
  |   
  |why there is so huge difference?
  |how can improve VMs disks speed?
  |   
  | 
  |   What are your gluster volume settings?

Have you

  | applied the following
  |   performance tunables in gluster's virt

profile:

  | 
  |   eager-lock=enable
  |   remote-dio=enable
  | 
  |   Regards,
  |   Vijay
  | 
  | setting were:
  | [root@centos155 ~]# gluster volume info gluster01
  |
  | Volume Name: gluster01
  | Type: Replicate
  | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
  | Status: Started
  | Number of Bricks: 1 x 2 = 2
  | Transport-type: tcp
  | Bricks:
  | Brick1: 10.2.75.152:/mnt/gluster01/brick
  | Brick2: 10.2.75.155:/mnt/gluster01/brick
  | Options Reconfigured:
  | storage.owner-gid: 36
  | storage.owner-uid: 36
  |
  |
  | add your settings settings now it looks
  |
  | [root@centos155 ~]# gluster volume info gluster01
  |
  | Volume Name: gluster01
  | Type: Replicate
  | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6
  | Status: Started
  | Number of Bricks: 1 x 2 = 2
  | Transport-type: tcp
  | Bricks:
  | Brick1: 10.2.75.152:/mnt/gluster01/brick
  | Brick2: 10.2.75.155:/mnt/gluster01/brick
  | Options Reconfigured:
  | network.remote-dio: enable
  | cluster.eager-lock: enable
  | storage.owner-gid: 36
  | storage.owner-uid: 36
  |
  |
  | but this didn't affected performace in any

big way

  | should hosts to be restarted?
  |
  
  glusterfs storage domain configuration GUI got

Optimize for virt. store option which have to
be enabled when configuring for virt store.
  


Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain
  
  If the configuration is manual,  you need to

set the group to 'virt' as shown below
  
  #gluster volume set VOLNAME group virt
  
  This will enable below options on gluster volume :
  
  quick-read=off

  read-ahead=off
  io-cache=off
  stat-prefetch=off
  eager-lock=enable
  remote-dio=on
  
  
  Can you please make sure group has set properly ?
  
  Also, invoke  dd with oflag=direct option and

check whether it helps ..
  
  
  --Humble

tnx a lot!! now it's much better - from VM i can
get dd with ~ 60 MB/s
this is still ~ x2 lower than from host, but x3
better than it was before :)

BTW could not found GUI got Optimize for virt.
store option  in oVirt 3.5



The option Optimize for Virt store is available when you select a 
volume in Ovirt - both as a right click menu option as well as a button 
in the top sub navigation bar.


You also can check this option while creating a gluster volume using the 
oVirt GUI





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users