Re: [ovirt-users] remove a lost gluster based datacenter
On 07/09/2014 01:45 AM, Demeter Tibor wrote: Dear listmembers, I have created a test environment for ovirt via four pc and a server. I have two datacenter on the main server: - a local datacenter on the server - a gluster based datacenter by the four dekstop pc 2 weeks ago someone took my pc-s (for doing other things:) I am could not remove the dead gluster based datacenter from ovirt. - It always want to your own servers:) - The force option doesn't work in this case. - The gluster bricks are does not uninstallable. - the cluster not removable - Everything want to everything else:) Move all the gluster hosts to maintenance. And then select all of them and click 'Remove', then select the 'Force' checkbox and Ok. I don't want to reinstall the whole ovirt because I have a lot of vm on the local datacenter. So, how can I remove a complety dead datacenter from ovirt? Thanks in advance. Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Best way to clone host
On 9-7-2014 3:23, Douglas Schilling Landgraf wrote: Hi Brad, On 07/08/2014 04:25 PM, Brad Bendy wrote: That worked, didnt see that vdsm.id file in there. At that point I just added the host in the manager like I normally would and boom it's up! Can I add this to the documentation somewhere so this is for public use? Yes, into the wiki page: wiki.ovirt.org I think it is a common enough problem to add a RFE for it to do it during host-deploy, agreed Douglas?? Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] remove a lost gluster based datacenter
Hi, I have try it before wrote this mail. It is impossible, it is a spm host Error while executing action: Cannot switch Host to Maintenance mode. Host is Storage Pool Manager and is in Non Responsive state. - If power management is configured, engine will try to fence the host automatically. - Otherwise, either bring the node back up, or release the SPM resource. To do so, verify that the node is really down by right clicking on the host and confirm that the node was shutdown manually. When I want to switch to maintence a non-spm host: Error while executing action: gluster4: Cannot remove Host. Server having Gluster volume. When I want to remove an gluster brick: Error while executing action: Cannot stop Gluster Volume. No up server found in glusters. When I want to remove a VM that was on this gluster based datacenter: Error while executing action: F19glusters: Cannot remove VM: Storage Domain cannot be accessed. -Please check that at least one Host is operational and Data Center state is up. So it is an vicious circle Tibor - Eredeti üzenet - On 07/09/2014 01:45 AM, Demeter Tibor wrote: Dear listmembers, I have created a test environment for ovirt via four pc and a server. I have two datacenter on the main server: - a local datacenter on the server - a gluster based datacenter by the four dekstop pc 2 weeks ago someone took my pc-s (for doing other things:) I am could not remove the dead gluster based datacenter from ovirt. - It always want to your own servers:) - The force option doesn't work in this case. - The gluster bricks are does not uninstallable. - the cluster not removable - Everything want to everything else:) Move all the gluster hosts to maintenance. And then select all of them and click 'Remove', then select the 'Force' checkbox and Ok. I don't want to reinstall the whole ovirt because I have a lot of vm on the local datacenter. So, how can I remove a complety dead datacenter from ovirt? Thanks in advance. Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt + gluster with host and hosted VM on different subnets
Am 08.07.2014 21:15, schrieb Martin Sivak: Hi, I do not recommend running hosted engine on top of GlusterFS. Not even on top of NFS compatibility layer the GlusterFS provides. There have been a lot of issues with setups like that. GlusterFS does not ensure that the metadata writes are atomic and visible to all nodes at the same time and that causes serious trouble (the synchronization algorithm relies on the atomicity assumption). You can use GlusterFS storage domain for VMs, but the hosted engine storage domain needs something else - NFS or iSCSI (available in 3.5). You should maybe document this with a big fat warning sign on the wiki and in the release notes and on the feature pages. I think many people will just combine what ovirt offers if there is just a warning hidden somewhere on a mailing list. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Best way to clone host
Am 09.07.2014 08:46, schrieb noc: I think it is a common enough problem to add a RFE for it to do it during host-deploy, agreed Douglas?? Also, there should be a clear error message indicating what the error is: duplicate vdsm id Care to open an RFE? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ip spoofing
Hi, I don't know if this is much help but here is our setup which works in a way that users cannot spoof public IP from inside VM. We've set up a MAC pool range on engine and a DHCP server on one VM, this server assigns IPs according to VMs MACs. We use CentOS6 nodes (and engine 3.3.5). The node always sees the VM's NIC by it's ovirt MAC, even if user changes it from inside VM. Now the solution was ebtables (bridge tables). We've set rules on bridge to public network which drops packets if they don't come from legit MAC/IP combination. Example: -A FORWARD -p IPv4 -s 0:1a:4a:f9:xx:xx --ip-src ! IPADDRofVM -j DROP Any comments on the setup are appriceated. JureKr On 06/19/2014 10:23 AM, Punit Dambiwal wrote: Hi, I have setup Ovirt with glusterfs...I have some concern about the network part 1. Is there any way to restrict the Guest VM...so that it can be assign with single ip address...and in anyhow the user can not manipulate the IP address from inside the VM (that means user can not change the ip address inside the VM). Thanks, Punit ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] [ACTION NEEDED] ovirt-engine-3.5 branch update
Il 08/07/2014 15:56, Sandro Bonazzola ha scritto: Hi, We're going to refresh ovirt-engine-3.5 branch tomorrow 2014-07-08 at 08:00 UTC. If you have any commits that are relevant only for 3.6 and not for 3.5, please don't merge them yet until we'll update the 3.5 stable branch. An email with the exact cutoff commits sha will be sent once the branch is updated. After branch update patch targeted to 3.5 will need to be cherry-picked to 3.5 branch too. ovirt-engine-3.5 branch has been updated, cutoff is at commit 5d0ca0b - webadmin: Fix 'Add Bricks' issue in new volume popup Existing open patches pending merge on 3.5 with patch already merged on master have been abandoned since they're included in this rebase. From now on, if you've patches targeted to 3.5 they must be cherry-picked to ovirt-engine-3.5 branch. A version bump patch for master will be pushed soon. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt 3.5.0 release schedule updated
Here is the updated schedule for oVirt 3.5.0. These are tentative planning dates and may change: 2014-08-26 (Tue): oVirt 3.5.0 GA 2014-08-12 (Tue): oVirt 3.5 Third Test Day 2014-08-04 (Mon): oVirt 3.5.0 RC 2014-07-24 (Thu): oVirt 3.5 Second Test Day 2014-07-21 (Mon): oVirt 3.5.0 second beta Release management page has been updated accordingly: http://www.ovirt.org/OVirt_3.5_release-management oVirt Google Calendar has been updated accordingly: ICAL: https://www.google.com/calendar/ical/ppqtk46u9cglj7l987ruo2l0f8%40group.calendar.google.com/public/basic.ics XML: https://www.google.com/calendar/feeds/ppqtk46u9cglj7l987ruo2l0f8%40group.calendar.google.com/public/basic HTML: https://www.google.com/calendar/embed?src=ppqtk46u9cglj7l987ruo2l0f8%40group.calendar.google.comctz=UTC -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
Hi, We're going to start composing oVirt 3.4.3 RC tomorrow *2014-07-10 08:00 UTC* from 3.4 branch. A 3.4.3 branch will be created immediately after using the same hash of the build. The bug tracker [1] shows no blocking bugs for the release Bug 1096312 - log spam in vdsm: guest agents not heartbeating has been proposed for backport from 3.6 target on the bug tracker [1] There are still 28 bugs [2] targeted to 3.4.3. Excluding node and documentation bugs we still have 9 bugs [3] targeted to 3.4.3. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.4.3 should not be released without them fixed. - Please update the target to any next release for bugs that won't be in 3.4.3: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] - Please build packages before today *2014-07-09 15:00 UTC*. Community: - If you're testing oVirt 3.4 nightly snapshot, please add yourself to the test page [5] [1] bugzilla.redhat.com/1107968 [2] http://red.ht/1lBAw2R [3] http://red.ht/1ly9hfA [4] http://www.ovirt.org/OVirt_3.4.3_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.4.3_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] video driver selection for VNC consoles
- Original Message - From: Darrell Budic darrell.bu...@zenfire.com To: users users@ovirt.org Sent: Wednesday, July 9, 2014 12:30:23 AM Subject: [ovirt-users] video driver selection for VNC consoles I’d like to use “-vga vga” for my VNC console VMs instead of “-vga cirrus”, any easy way to do this? -Darrell very easly, use os-info to change vnc/cirrus to vnc/vga for the OS you like you need to create 10-osinfo.properties under share/ovirt-engine/conf/ to override os configurations (look at osinfo-defaults.properties and in http://www.ovirt.org/OS_info for more info ) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ip spoofing
Hi Jure, It's okbut what about if user will spoof the ip on the eth0:0then the mac address will be same as eth0 ?? how we can control this ?? Thanks, Punit D On Wed, Jul 9, 2014 at 3:38 PM, Jure Kranjc jure.kra...@arnes.si wrote: Hi, I don't know if this is much help but here is our setup which works in a way that users cannot spoof public IP from inside VM. We've set up a MAC pool range on engine and a DHCP server on one VM, this server assigns IPs according to VMs MACs. We use CentOS6 nodes (and engine 3.3.5). The node always sees the VM's NIC by it's ovirt MAC, even if user changes it from inside VM. Now the solution was ebtables (bridge tables). We've set rules on bridge to public network which drops packets if they don't come from legit MAC/IP combination. Example: -A FORWARD -p IPv4 -s 0:1a:4a:f9:xx:xx --ip-src ! IPADDRofVM -j DROP Any comments on the setup are appriceated. JureKr On 06/19/2014 10:23 AM, Punit Dambiwal wrote: Hi, I have setup Ovirt with glusterfs...I have some concern about the network part 1. Is there any way to restrict the Guest VM...so that it can be assign with single ip address...and in anyhow the user can not manipulate the IP address from inside the VM (that means user can not change the ip address inside the VM). Thanks, Punit ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION NEEDED] oVirt 3.5.0 Second Beta status
Hi, We're going to compose oVirt 3.5.0 Second Beta on Mon *2014-07-21 08:00 UTC*. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-07-20 15:00 UTC* The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1114994 infra NEW Cannot edit cluster after upgrade from version 3.4 to 3.5 because cpu type (Intel Haswell) does not match 1115044 infra POSTHost stuck in Unassinged state when using jsonrpc and disconnection from pool failed 1115152 infra POSTCannot edit or create block storage doamin when using jsonrpc 1116009 infra POSTsdk always raises a DisconnectedError trying to instantiate again after a previous failure 1060198 integration NEW [RFE] add support for Fedora 20 1073944 integration ASSIGNEDAdd log gathering for a new ovirt module (External scheduler) 1113974 integration POSTHostname validation during all-in-one setup 1113091 network POSTVDSM trying to restore saved network rollback 1114057 storage NEW uploaded iso is not visible in the engine 1110305 virtPOSTBSOD - CLOCK_WATCHDOG_TIMEOUT_2 - Win 7SP1 guest, need to set hv_relaxed About Add log gathering for a new ovirt module (External scheduler), patch have been merged on upstream sos master branch. For Fedora = 19 sos-3.1 package includes the fix. For EL 6 patches need to be backported to ovirt-log-collector. Feature freeze is now effective, and branch has been created. All new patches must be backported to 3.5 branch too. Features completed are marked in green on Features Status Table [2] There are still 422 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 358 bugs [4] targeted to 3.5.0. Maintainers / Assignee: - Please remember to rebuild your packages before *2014-07-20 15:00* if needed, otherwise nightly snapshot will be taken. - Please be sure that 3.5 snapshot allow to create VMs before *2014-07-20 15:00 UTC* - If you find a blocker bug please remember to add it to the tracker [1] - Please start filling release notes, the page has been created here [5] - Please review and add test cases to oVirt 3.5 Second Test Day [6] Community: - Thanks for your participation in first test day! - You're welcome to join us testing next beta release and getting involved in oVirt Quality Assurance[7]! [1] http://bugzilla.redhat.com/1073943 [2] http://bit.ly/17qBn6F [3] http://red.ht/1pVEk7H [4] http://red.ht/1rLCJwF [5] http://www.ovirt.org/OVirt_3.5_Release_Notes [6] http://www.ovirt.org/OVirt_3.5_TestDay [7] http://www.ovirt.org/OVirt_Quality_Assurance Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Vm console creation using noVNC
Hi Michal, Okay.. Thanks.. But still i am not sure how can i create the encrypted ticket details. When i decoded i got validFrom,validTo,data,signature and salt and this is dynamic and each time we open a console it will be regenerated but i didn't find out any doc about how we can encode these details. Is there any special method to encrypt the ticket details for console ? -- Regards Shanil On Tue, Jul 8, 2014 at 7:28 PM, Michal Skrivanek michal.skriva...@redhat.com wrote: On Jul 8, 2014, at 09:37 , Shanil S xielessha...@gmail.com wrote: Hi, I am creating console using api, for this i created a ticket using the rest api and used the ticket value as password and i am able to connect it using these details using vnc client. I am planning to use the console from the browser using the novnc console ( http://kanaka.github.io/noVNC/ ) as like the same way which used in the ovirt panel. When i checked the novnc-main.html it is found that the ticket information details are passing in the encrypted format and passing the signature and salt and ticket details as an array, Could you please tell me how can i create these details in the encoded format and create a console using noVnc and rest api ? Hi, you'd have to do it the same way as the backend java code does that. There's no special shortcut/API. depending on what are you specifically doing, you may not even need to do that. If you bypass ovirt's websocket-proxy and e.g. connect to hosts directly (and run/setup websocket proxy your own way) then you can also implement the security of client-proxy in some other way. Thanks, michal -- Regards Shanil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Vm console creation using noVNC
Am 09.07.2014 13:30, schrieb Shanil S: Hi Michal, Okay.. Thanks.. But still i am not sure how can i create the encrypted ticket details. When i decoded i got validFrom,validTo,data,signature and salt and this is dynamic and each time we open a console it will be regenerated but i didn't find out any doc about how we can encode these details. Is there any special method to encrypt the ticket details for console ? you just pass the necessary information from the ticket to the console? you might need to alter some of the html5 stuff in novnc to achieve that. Did you even took a look at the novnc source shipped with ovirt? I know this is possible with just a few tweaks, because I've seen people do it already, but I can't guide you step-by-step, after all, you're the developer. :) -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
Hi, I just wrote to the tracker which I think is worth and possible to backport, here is the list for greater visibility: another call for backporting, as this is an easy fix and I could track my debian vms more easily: https://bugzilla.redhat.com/show_bug.cgi?id=1073453 I don't know why this was retargeted to 3.5. when urgency was high, maybe you can port it to 3.4.3: https://bugzilla.redhat.com/show_bug.cgi?id=1064927 and another simple fix, which was targeted against 3.3.z: https://bugzilla.redhat.com/show_bug.cgi?id=1072030 -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
On Jul 9, 2014, at 13:50 , Sven Kieske s.kie...@mittwald.de wrote: Hi, I just wrote to the tracker which I think is worth and possible to backport, here is the list for greater visibility: another call for backporting, as this is an easy fix and I could track my debian vms more easily: https://bugzilla.redhat.com/show_bug.cgi?id=1073453 it has a (formal) dependency on the guest agent in 3.5 as well. So to declare it properly we'd need more work than just few lines to osinfo I don't know why this was retargeted to 3.5. when urgency was high, maybe you can port it to 3.4.3: https://bugzilla.redhat.com/show_bug.cgi?id=1064927 many things has high urgency, it's not the highest:) the backport is really simple though. Maybe Shahar can help, I'm sure if you, Sven, can help with a verification on 3.4 it's a no brainer... Thanks, michal and another simple fix, which was targeted against 3.3.z: https://bugzilla.redhat.com/show_bug.cgi?id=1072030 -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
Am 09.07.2014 14:59, schrieb Michal Skrivanek: it has a (formal) dependency on the guest agent in 3.5 as well. So to declare it properly we'd need more work than just few lines to osinfo Well, the guest-agent has no dependency on 3.5 as I'm actually running it on production debian vms :) it's an entire different repository, so I don't see the link between guest-agent and engine release. I'll surely help testing these things as much as I can :) Thanks for the reply. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
On Jul 9, 2014, at 15:08 , Sven Kieske s.kie...@mittwald.de wrote: Am 09.07.2014 14:59, schrieb Michal Skrivanek: it has a (formal) dependency on the guest agent in 3.5 as well. So to declare it properly we'd need more work than just few lines to osinfo it is there in that bug:) Well, the guest-agent has no dependency on 3.5 as I'm actually running it on production debian vms :) it's an entire different repository, so I don't see the link between guest-agent and engine release. one thing i that you're using it another thing to sort of officially declare it as supported. In this particular case - do you need the icon in user portal? If not you can just go ahead and drop in your own property file into /etc/ovirt-engine/osinfo.conf/ (I think) with those few lines for Debian (or anything else) and you're all set. Just remove it on upgrade to 3.5 Would it work for you? I'll surely help testing these things as much as I can :) Shahar, would you please post the backport for http://gerrit.ovirt.org/#/c/25245/ ? Thanks, michal Thanks for the reply. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.4.3 RC status
On 09.07.14 15:39, Michal Skrivanek wrote: On Jul 9, 2014, at 15:08 , Sven Kieske s.kie...@mittwald.de wrote: Am 09.07.2014 14:59, schrieb Michal Skrivanek: it has a (formal) dependency on the guest agent in 3.5 as well. So to declare it properly we'd need more work than just few lines to osinfo it is there in that bug:) Well, the guest-agent has no dependency on 3.5 as I'm actually running it on production debian vms :) it's an entire different repository, so I don't see the link between guest-agent and engine release. one thing i that you're using it another thing to sort of officially declare it as supported. In this particular case - do you need the icon in user portal? If not you can just go ahead and drop in your own property file into /etc/ovirt-engine/osinfo.conf/ (I think) with those few lines for Debian (or anything else) and you're all set. Just remove it on upgrade to 3.5 Would it work for you? I'll surely help testing these things as much as I can :) Shahar, would you please post the backport for http://gerrit.ovirt.org/#/c/25245/ ? Thanks, michal Sure Thanks for the reply. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] video driver selection for VNC consoles
Nice, I missed this somewhere along the line. Unfortunately, it’s not working for me. I created a 10-osinfo.properties in /usr/share/ovirt-engine/conf and symlinked it into /etc/ovirt-engine/osinfo.conf.d for good measure, restarted jboss-as and ovirt-engine, and started up a VM but it still got a -vga cirrus device. Contents of my 10-osinfo.properties: os.other.devices.display.protocols.value = vnc/vga,qxl/qxl I notice I didn’t have an os.other.devices.display.protocols in my existing 00-defaults.properties. I’m running 3.3.4 on this cluster, is this fully supported in that version? On Jul 9, 2014, at 4:42 AM, Omer Frenkel ofren...@redhat.com wrote: - Original Message - From: Darrell Budic darrell.bu...@zenfire.com To: users users@ovirt.org Sent: Wednesday, July 9, 2014 12:30:23 AM Subject: [ovirt-users] video driver selection for VNC consoles I’d like to use “-vga vga” for my VNC console VMs instead of “-vga cirrus”, any easy way to do this? -Darrell very easly, use os-info to change vnc/cirrus to vnc/vga for the OS you like you need to create 10-osinfo.properties under share/ovirt-engine/conf/ to override os configurations (look at osinfo-defaults.properties and in http://www.ovirt.org/OS_info for more info ) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Weekly Meeting Minutes-July 9, 2014
Meeting ended Wed Jul 9 15:21:46 2014 UTC. Information about MeetBot at http://wiki.debian.org/MeetBot . (v 0.1.4) Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-09-14.03.html Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-09-14.03.txt Log: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-09-14.03.log.html = #ovirt: oVirt Weekly Sync = Meeting started by bkp at 14:03:29 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-09-14.03.log.html . Meeting summary --- * Agenda and Roll Call (bkp, 14:03:53) * infra update (bkp, 14:03:53) * 3.4.z updates (bkp, 14:03:53) * 3.5 status (bkp, 14:03:53) * conferences and workshops (bkp, 14:03:53) * other topics (bkp, 14:03:55) * infra update (bkp, 14:05:10) * infra resources.ovirt.org cleaned so the migration is less pressing (bkp, 14:07:06) * infra storage servers configured on PHX, now installing the hosted engine (bkp, 14:07:51) * infra work started on jenkins jobs for 3.5 publisher (bkp, 14:09:32) * 3.4.z updates (bkp, 14:11:36) * 3.4.z status oVirt 3.4.3 RC tomorrow *2014-07-10 08:00 UTC* from 3.4 branch. (bkp, 14:13:19) * 3.4.z updates No known blockers, some bugs proposed to be backported (bkp, 14:15:28) * 3.4.z updates RC scheduled for tomorrow, sbonazzo has sent a few emails about issues found on jenkins jobs but we should be on track (bkp, 14:15:28) * 3.4.z updates More detailed status found at: http://lists.ovirt.org/pipermail/users/2014-July/025846.html (bkp, 14:17:26) * 3.5 status (bkp, 14:17:58) * 3.5 status integration Detailed status at http://lists.ovirt.org/pipermail/users/2014-July/025849.html (bkp, 14:22:51) * 3.5 status integration New proposed schedule for 3.5 has been proposed. Shooting for a 8/26/14 GA release of 3.5. See proposal here. http://lists.ovirt.org/pipermail/users/2014-July/025845.html (bkp, 14:22:51) * 3.5 status integration Three blockers (1060198, 1073944, 1113974) to be fixed before second beta (bkp, 14:23:47) * 3.5 status integration ovirt engine master is now on 3.6, 3.5 patches must be cherry picked to 3.5 branch (bkp, 14:25:01) * 3.5 status ux (bkp, 14:25:43) * 3.5 status ux patternfly code successfully removed from the source tree and is now available in separate rpm (bkp, 14:31:16) * 3.5 status ux merged the remaining sorting infrastructure, and are in the process of merging the remaining patches that apply sorting to each individual tab. We are hoping to have them all merged by end of the week. (bkp, 14:31:16) * 3.5 status ux The Italian translation is about 30% done (bkp, 14:31:16) * 3.5 status ux Sorting patches to be backported to the stable branch in a little over a week. (bkp, 14:31:16) * 3.5 status network (bkp, 14:31:36) * 3.5 status network Bug 11133091 blocker in POST status. (bkp, 14:36:26) * 3.5 status network Bug 1115001, Error code 23 when invoking Setup Network, being examined to see if it is a blocker (bkp, 14:42:22) * 3.5 status network No *new* blockers to report. (bkp, 14:42:22) * 3.5 status network Bug 1113091 fix ETA to be determined, patch acknowledged, just needs verification and backporting. (bkp, 14:42:22) * 3.5 status gluster (bkp, 14:43:14) * 3.5 status virt (bkp, 14:46:00) * 3.5 status gluster Nothing this week (bkp, 14:49:16) * 3.5 status storage (bkp, 14:50:42) * 3.5 status storage Bug 1114057, new blocker, no status to report (bkp, 14:57:56) * 3.5 status storage focusing on stabilization and bug fixes. Seems like /most/ of the infra issues we encountered last status will be solved once the master is rebased. (bkp, 14:57:56) * 3.5 status infra (bkp, 14:58:16) * 3.5 status virt Blocker bug 1110305 still in review. Reviewers, please advise status. (bkp, 15:04:38) * 3.5 status sla (bkp, 15:05:57) * 3.5 status sla Fixing a couple of bugs from Test Day we need to fix (hosted engine, scheduling) (bkp, 15:12:34) * 3.5 status sla 1114987 and 1093366 are high priority, as 1114987 is a test blocker and 1093366 is serious, but older and not generating a lot of complaints. (bkp, 15:12:34) * 3.5 status sla features are getting there - we now have most of the patches verified and reviewed, final touches are being done (bkp, 15:12:34) * 3.5 status sla The log flood in vdsm is fixed and merged to master and submitted for 3.5 branch with verified flag already set (bkp, 15:12:34) * 3.5 status node (bkp, 15:12:48) * 3.5 status vdsm (bkp, 15:15:53) * 3.5 status infra Nothing reported this week. Four blockers (1 new [1114994], 3 POST [1115044, 1115152, 1116009]) listed on bug tracker. (bkp, 15:18:24) * 3.5 status node Nothing reported this week. No blockers listed. (bkp, 15:18:24)
[ovirt-users] RFE/Bug in engine-iso-uploader / image uploader with NFSv4 shares
Hello, can maybe someone confirm this before I head on to bugzilla for an RFE? When using engine-iso / image uploader scrips in conjunction with NFSv4 iso domains on my F20 client, the upload fails with: ERROR: mount.nfs: an incorrect mount option was specified I might be hitting a Fedora bug; anyway: Workaround: Add 'nfsvers=3' mount option, changing line 42 in the (iso-uploader) script: NFS_MOUNT_OPTS = '-t nfs -o rw,sync,soft,nfsvers=3' AFAIK this should always work, no matter what. Making the mount options part of the appropriate /etc/ovirt-engine/*.conf files could be a solution here. Cheers, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 smime.p7s Description: S/MIME cryptographic signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt + gluster with host and hosted VM on different subnets
- Original Message - From: Nicolas Ecarnot nico...@ecarnot.net To: users@ovirt.org Sent: Tuesday, July 8, 2014 12:55:10 PM Subject: Re: [ovirt-users] oVirt + gluster with host and hosted VM on different subnets Le 08/07/2014 21:15, Martin Sivak a écrit : Hi, I do not recommend running hosted engine on top of GlusterFS. Not even on top of NFS compatibility layer the GlusterFS provides. Martin, It is very disturbing for us, final users, to read the comment above and the web page below, both written by Redhat employees. http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ I did note in that post that this is all new and somewhat in flux that there are split-brain issues in play. FWIW, I'm actively working w/ a 3 node hosted ovirt + glusterfs cluster in my lab. I'll post about problems solutions I encounter as I encounter them... Jason We are about to try to setup a 3 nodes hosted ovirt + glusterfs cluster, but this kind of comment may delay our project. -- Nicolas Ecarnot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Problem Windows guests start in pause
I have an Fedora host in cluster Default, I've created another cluster with a CentOS to migrate the environment. and all the linux guest work perfectly, but the windows guest start in pause on the other cluster. the vdsm log from the CentOS host. http://pastebin.com/AzUB2Fqy -- contatos: Celular: ( 99 ) 9143-5954 - Vivo skype: lucasd3castro msn: lucascastrobor...@hotmail.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Orphaned record in the engine DB prevents host removal
- Original Message - El Domingo, 6 de Julio de 2014 07.06 CLT, Arik Hadas aha...@redhat.com Ha escrito: - Original Message - On 04/07/14 14:45, Oved Ourfali wrote: Is there a migration of this VM in progress? Did it migrate recently? Thank you Oved, I have already solved the problem, I have posted the solution to the list. However I don't understand how the data is recorded in the table vm_dyanmic. I guess that in this table the engine records the current status data of the vm's in the datacenter. In my engine DB almost all the registries in the vm_dynamic table have a vm id in the migrating_to_vds field, this id is the same in the run_on_vds field. Is it right that the migrating_to_vds field have a value after the vm g t; has been migrated?? Yes, we're about to fix it. Note that there is an open bug for this issue: https://bugzilla.redhat.com/show_bug.cgi?id=1112359 If you will be able to provide the info I've asked for there, it could help us to solve it faster :) Arik My setup: oVirt Engine Version: 3.4.0-1.el6 Nodes (vds's, hosts, etc.): Centos 6.5 ovirt-node 3.4, vdsm-4.14.6-0.el6 Thank you, and happy weekend! Federico I suggest to attach the engine log here as well, if possible, for examination. Cc-ing some guys that might help but bare in mind that for some of them it is already weekend. Oved On Jul 4, 2014 6:07 PM, Federico Alberto Sayd wrote: Hello People: I am trying t o remove a host from ovirt-engine but I have fouHello People: I am trying to remove a host from ovirt-engine but I have found that a orphaned record in the engine DB prevents the removal of the host. The host is in maintenance mode, it doesn't have vm's running on it. The engine logs says that there is a reference to the id of the host (vds_id in the table vds_static) in the field migrating_to_vds in the table dynamic_vds. Obviously this is a orphaned record, but a constraint in the table dynamic_vds prevents the removal of the host. How can I solve this? Someone that knows the internals of engine's DB that can confirm if I can remove the problematic registry in order to remove the host?? Another solution? I really need to remove this h ost. Please help and Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/user Indeed, you are right, is the same bug. I didn't find this bug when googled the problem. I have attached an extract of the logs when I tried to remove the host, it looks identical to the logs reported in the bug except that postgres transactions are logged in Spanish. Thanks I will try to find the log entry when the vm was migrated and the value was not correctly updated in the migrating_to_vds field. I think that that is the more critical bug. I was able to reproduce it on 3.4 branch and to understand the problem. On master it was fixed by: http://gerrit.ovirt.org/#/c/24799/ I'll backport this patch and it will solve it on 3.4 as well. Thank you Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Migration / Snapshots- CentOS 6.5
Thought I was smooth sailing, guess not. When I did this clone would I need to reset the Sanlock UUIDs? Im getting a bunch of weird errors when going to activate a gluster storage domain to the datacenter. 2014-07-09 07:24:40,211 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateStoragePoolVDSCommand] (org.ovirt.thread.pool-6-thread-6) [5338d906] Command CreateStoragePoolVDSCommand(HostName = phx-kvm-01, HostId = dfcb3d3d-32c0-40ec-8c96-6abb6f0589b1, storagePoolId=0002-0002-0002-0002-03e7, storagePoolName=Default, masterDomainId=cd39b203-e95a-4580-8070-eb283cce0e16, domainsIdList=[cd39b203-e95a-4580-8070-eb283cce0e16], masterVersion=5) execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to CreateStoragePoolVDS, error = Cannot acquire host id: ('cd39b203-e95a-4580-8070-eb283cce0e16', SanlockException(22, 'Sanlock lockspace add failure', 'Invalid argument')), code = 661 2014-07-09 07:24:40,215 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.CreateStoragePoolVDSCommand] (org.ovirt.thread.pool-6-thread-6) [5338d906] FINISH, CreateStoragePoolVDSCommand, log id: 30f5b525 2014-07-09 07:24:40,216 ERROR [org.ovirt.engine.core.bll.storage.AddStoragePoolWithStoragesCommand] (org.ovirt.thread.pool-6-thread-6) [5338d906] Command org.ovirt.engine.core.bll.storage.AddStoragePoolWithStoragesCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to CreateStoragePoolVDS, error = Cannot acquire host id: ('cd39b203-e95a-4580-8070-eb283cce0e16', SanlockException(22, 'Sanlock lockspace add failure', 'Invalid argument')), code = 661 (Failed with error AcquireHostIdFailure and code 661) Any insight into this? On Mon, Jul 7, 2014 at 12:14 AM, Jorick Astrego j.astr...@netbulae.eu wrote: On 07/05/2014 04:39 PM, Karli Sjöberg wrote: Den 5 jul 2014 16:22 skrev Brad Bendy brad.be...@gmail.com: Haha, yeah never have been a Fedora fan, and nothing has changed. Is the only big feature im missing out on is snapshots? From what I can tell, and in my testing, everything else seems to work. Was deploying GlusterFS but without the live migration to another host that is somewhat defeated. VM live migration works, live _disk_ migration does not. Only way to get that is with RHEL really then? No, as I earlier pointed out, there is a place you can get the packages you need for CentOS: http://jenkins.ovirt.org/view/All/job/qemu-kvm-rhev_create-rpms_el6/lastStableBuild/ You'll have to download- and force install them over the already installed versions of those packages on all Hosts and then it'll work. Though, next time there are updates, yum will update from the standard repos and it just stops working again until you repeat the procedure. /K Just add exclude=qemu-kvm* in /etc/yum.conf so yum will leave them allone Kind regards, Jorick Astrego Netbulae ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ilo4 vs. ipmilan fencing agents
Hi all -- I'm trying to get fencing squared away in my cluster of hp dl-380 servers, which come with ilo4. I was able to get a successful status check from the command line with fence_ilo4, but not w/ the ilo4 option in ovirt. I see, though, that ilo4 in ovirt just maps to fence_ipmilan, and I was not able to get a successful status check w/ fence_ipmilan from the cli. So, I tried resetting the mapping so that ilo4 maps to ilo4. Now I can complete the power management test in ovirt, but I imagine there's some reason why ovirt isn't configured this way by default. Will fencing actually work for me with ilo4 mapped to ilo4, rather than to ipmilan? Thanks, Jason --- Jason Brooks Red Hat Open Source and Standards @jasonbrooks | @redhatopen http://community.redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Live Migration / Snapshots- CentOS 6.5
- Original Message - From: Brad Bendy brad.be...@gmail.com To: Karli Sjöberg karli.sjob...@slu.se Cc: users@ovirt.org Sent: Saturday, July 5, 2014 6:57:45 AM Subject: Re: [ovirt-users] Live Migration / Snapshots- CentOS 6.5 If I use Fedora will everything work? I had numerous issues, IIRC I could not even get the ovirtmgmt switch to install and a few other things. What version of Fedora do you recommend then? Ill do another install and give that a whirl again. My current setup is on F20, with a hosted engine running on CentOS 6.5. I mainly use Fedora because nested kvm works better there. My storage is gluster, hosted on the F20 machines. I'm seeing some SELinux issues right now, so I'm in permissive mode until I can file bugs for them. Jason Thanks! On Fri, Jul 4, 2014 at 10:33 PM, Karli Sjöberg karli.sjob...@slu.se wrote: Den 5 jul 2014 07:04 skrev Brad Bendy brad.be...@gmail.com: Hi, Ive seeing conflicting info with what version of qemu rpms are needed to do live migration under CentOS. It appears the stock ones will not work and the RHEV ones are required. All the mailing list post I see are from 3-4 months ago, so not sure. Im getting VDSGenericException: VDSErrorException: Failed to SnapshotVDS, error = Snapshot failed, code = 48 (Failed with error SNAPSHOT_FAILED and code 48) I also saw this thread: http://comments.gmane.org/gmane.linux.centos.general/138593 Ive been having issues getting those to install, but before I spent to much more time I wanted to really see if I was on the right track. Is there a better OS choice? I first started trying with Fedora 19 and 20 and has major issues, went to CentOS 6.5 and this is the first and only issue so far ive ran into. Thanks! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Well, going with Fedora would at least get you the snapshots working, if I remember correctly, but that's not something you run in production. As you said, major issues. For CentOS, you need special versions of certain packages, since RedHat wants you to pay for RHEV, they have chosen to cripple the standard packages so those features won't work: http://lists.ovirt.org/pipermail/devel/2014-June/007735.html And here you can find the packages you need: http://jenkins.ovirt.org/view/All/job/qemu-kvm-rhev_create-rpms_el6/lastStableBuild/ /K ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ilo4 vs. ipmilan fencing agents
My colleague figured out that in order for ipmilan to work, I had to include lanplus=on in the options. Apparently, lanplus=on is the default for the ilo4 agent, and lanplus=off is the default for the ipmilan agent. - Original Message - From: Jason Brooks jbro...@redhat.com To: users users@ovirt.org Sent: Wednesday, July 9, 2014 3:02:13 PM Subject: [ovirt-users] ilo4 vs. ipmilan fencing agents Hi all -- I'm trying to get fencing squared away in my cluster of hp dl-380 servers, which come with ilo4. I was able to get a successful status check from the command line with fence_ilo4, but not w/ the ilo4 option in ovirt. I see, though, that ilo4 in ovirt just maps to fence_ipmilan, and I was not able to get a successful status check w/ fence_ipmilan from the cli. So, I tried resetting the mapping so that ilo4 maps to ilo4. Now I can complete the power management test in ovirt, but I imagine there's some reason why ovirt isn't configured this way by default. Will fencing actually work for me with ilo4 mapped to ilo4, rather than to ipmilan? Thanks, Jason --- Jason Brooks Red Hat Open Source and Standards @jasonbrooks | @redhatopen http://community.redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VM Contextutalization?
One of the CentOS developers has asked me if oVirt could be used to create something like this: http://wiki.centos.org/Cloud/OpenNebula Only with oVirt rather than OpenNebula. Anyone have any pointers/ideas? BKP -- Brian Proffitt oVirt Community Manager Project Atomic Community Lead Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM Contextutalization?
On 07/09/2014 08:52 PM, Brian Proffitt wrote: One of the CentOS developers has asked me if oVirt could be used to create something like this: http://wiki.centos.org/Cloud/OpenNebula Only with oVirt rather than OpenNebula. Anyone have any pointers/ideas? We can use oVirt to export CentOS OVF images. Users will then upload the image to oVirt using engine-image-uploader. http://www.ovirt.org/OVirt_engine_tools#engine-image-uploader BKP ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Disk's locked of VM
Hello Vered, Sorry for the late reply. You did more than try. With your help I resolved my problem. I was busy doing my job. This is only a side thing according to my boss but he doesn't know how much time we will safe if we have a decent and easy to use test enviroment to see why something happen in the real world at our customers. But anyways ... I have the following setup. One server with the engine on and this one also delivers the storage via nfs. On another server I have only the VDSM setup. When I say I'm trying to put the disk in stateless mode (off a VM machine) I' mean that I'm trying to install new software on a VM but when I reboot everything is back the way it was before the changed situation of the new software. Kind regards. 2014-07-06 8:27 GMT+02:00 Vered Volansky ve...@redhat.com: Hi Andy, Happy to (try to) help :) What do you mean by putting the disks in stateless mode? By server do you mean the storage server, I presume? If so, I can see how this might have caused corruption. Still Would like to be sure what you mean to better understand the issue. Unfortunately, vdsm log was not helpful due to the gap, but the engine log might help out if I knew what operation I was looking for. BTW, Was the vdsm log on the SPM machine? If not, and you do still have it (or a rotation of it), I'd like to take a look and see if we have a bug hiding there. Thanks, Vered - Original Message - From: Andy Michielsen andy.michiel...@gmail.com To: Vered Volansky ve...@redhat.com Cc: users@ovirt.org Sent: Thursday, July 3, 2014 6:03:42 PM Subject: Re: [ovirt-users] Disk's locked of VM Hello Vered, We where trying to put the disks i stateless mode and the user was impatient and also started the server. I have changed the lock status now but the machine was broken. I 'm already creating a new VM as these are test machines and I don't care about the data in these VM's. Thank you very much for your assistance so far. I 'm curious still what happened though so if you have questions I will give additional info if needed. Kind regards. 2014-07-03 14:57 GMT+02:00 Vered Volansky ve...@redhat.com : Sorry, got sent in the middle. Andy, What operation did you try to attempt that caused the disks to lock? You do have a working engine, right? Your'e supposed to be able to see the Disks' GUIDs under the Disks main tab (Id column). The images GUIDs are available in the DB (images table) and through vdsClient getVolumesList sdUUID spUUID [imgUUID] imgUUID should be the disk's GUID in the engine. You should be able to get that data from vdsClient as well: getImagesList sdUUID relevant sql query: select image_guid, imagestatus from images; *image status 2 is locked... The spUUID: Either the datacenter GUID in the engine, or - vdsClient -s 0 getConnectedStoragePoolsList, or in the db: select * from storage_pool; The StorageDomain's can be retrieved either by DB (bellow) or vdsClient: getStorageDomainsList spUUID (from above). sql query: select storage_name, id from storage_domains where storage_pool_id='spUUID'; - Original Message - From: Andy Michielsen andy.michiel...@gmail.com To: Vered Volansky ve...@redhat.com Cc: users@ovirt.org Sent: Thursday, July 3, 2014 3:09:41 PM Subject: Re: [ovirt-users] Disk's locked of VM Vered, Where can I find the images GUIDs ? Kind regards.snapshots' 2014-06-30 17:40 GMT+02:00 Vered Volansky ve...@redhat.com : Or better yet, just use: oVirtDir/share/ovirt-engine/dbscripts/unlock_entity.sh I suppose you have the images GUIDs from engine. BUT - If the images never got released you might want to get to know what got them into this in the first place. You can send vdsm and engine logs from that period of time if you still got them, and we'll take a look. Regards, Vered - Original Message - From: Vered Volansky ve...@redhat.com To: Andy Michielsen andy.michiel...@gmail.com Cc: users@ovirt.org Sent: Monday, June 30, 2014 6:03:15 PM Subject: Re: [ovirt-users] Disk's locked of VM - Original Message - From: Andy Michielsen andy.michiel...@gmail.com To: Vered Volansky ve...@redhat.com Cc: users@ovirt.org Sent: Monday, June 30, 2014 4:57:05 PM Subject: Re: [ovirt-users] Disk's locked of VM Hello, How can I connect to my postgress database ? Try this: psql -d engine -U engine . This is assuming you're using password authentication. If you aren't please send me your pg_hba.conf settings and we'll go forward from there: Fedora,RHEL /var/lib/pgsql/data/pg_hba.conf Debian /etc/postgresql/*/main/pg_hba.conf Gentoo /etc/postgresql-*/pg_hba.conf Kind regards. On Jun 30, 2014