Re: [ovirt-users] multipath: error getting device

2014-09-13 Thread Daniel Erez
Hi Jorick, This error is most often caused by multipath attempting to map a device which is already in use, such as if its mounted or mapped by an active LVM logical volume. If the blacklist in /etc/multipath.conf does not restrict multipath from mapping the device, then when it gets run during

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Mohyedeen Nazzal
On Sat, Sep 13, 2014 at 11:25 PM, Itamar Heim wrote: > On 09/13/2014 03:38 PM, Mohyedeen Nazzal wrote: > >> One more thing,, >> >> Being able to attach USB dongles from the admin portal... >> > > like the hostusb vdsm hook allows? > Yes, exactly. > >> Thanks, >> Mohyedeen. >> >> On Sat, Sep 13,

[ovirt-users] lost connectivty to the ovirt-engine after adding host

2014-09-13 Thread Ramon Ramirez-Linan
Hi, I am working on a proof of concept using using oVirt and ManageIQ. I have a CentOS6.5 where I deployed libvirt, I create a VM where I deployed oVirt 3.4. I was trying to add the host where the VM with oVirt resides. After much troubleshooting I was able to add the host but now the oVirt VM is

[ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Paul Jansen
My vote is for storage load balancing/scheduler. Vmware's Vcenter has the concept of a 'storage cluster'. It's essentially a logical storage device. When you configure hosts/vms to use this device vcenter then works out which of the actual storage devices underneath this logical device is will

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Sven Kieske
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 13.09.2014 22:25, Itamar Heim wrote: > like the hostusb vdsm hook allows? is this installed by default, yet? furthermore I think you need to enable it via engine-config(custom parameters), don't you? I guess what is asked for is something working "

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nicolas Ecarnot
Le 13/09/2014 20:38, Nir Soffer a écrit : - Original Message - From: "Nicolas Ecarnot" To: "Nir Soffer" Cc: users@ovirt.org, "Federico Simoncelli" Sent: Saturday, September 13, 2014 9:24:55 PM Subject: Re: [ovirt-users] [RFI] oVirt 3.6 Planning Le 13/09/2014 17:34, Nir Soffer a écrit

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Itamar Heim
On 09/13/2014 03:32 PM, Mohyedeen Nazzal wrote: When VMs goes to unknown status, all control options are grayed, and the only way to fix this is to update the Database manually, it will be nice to be able to force the engine to poweroff the VM from admin portal. 'unknown' means the host is in n

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Itamar Heim
On 09/13/2014 03:38 PM, Mohyedeen Nazzal wrote: One more thing,, Being able to attach USB dongles from the admin portal... like the hostusb vdsm hook allows? Thanks, Mohyedeen. On Sat, Sep 13, 2014 at 3:32 PM, Mohyedeen Nazzal mailto:mohyedeen.naz...@gmail.com>> wrote: When VMs goes t

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Itamar Heim
On 09/12/2014 04:53 PM, Sven Kieske wrote: +1! I really would like to see a fast working way to create, manage and use ceph in ovirt. I don't know if implementation through openstack component is enough, because you will need more components then (keystone for auth e.g.). you would need to set

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Itamar Heim
On 09/12/2014 04:45 PM, Federico Alberto Sayd wrote: On 12/09/14 09:55, Jakub Bittner wrote: ISO upload over web UI. +1, Is it so hard to implement such feature? well, the tricky part is web ui access the engine, which doesn't access the storage, rather the hosts do, so you need to stream it

[ovirt-users] Latest 3.5 - No "Enable Gluster Service" check box.

2014-09-13 Thread Nathan Stratton
Latest 3.5 install as of today, I already have gluster up and running on all host and I am trying to import my gluster volume into ovirt. When I go to edit the cluster I have "Enable Gluster Service" but there is no check box next to it to check or uncheck. If I look at the host under Hosts, I do

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nir Soffer
- Original Message - > From: "Nicolas Ecarnot" > To: "Nir Soffer" > Cc: users@ovirt.org, "Federico Simoncelli" > Sent: Saturday, September 13, 2014 9:24:55 PM > Subject: Re: [ovirt-users] [RFI] oVirt 3.6 Planning > > Le 13/09/2014 17:34, Nir Soffer a écrit : > >> For God's sake, please,

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nicolas Ecarnot
Le 13/09/2014 17:34, Nir Soffer a écrit : For God's sake, please, prevent "secondary" storage domains (anything other than the master, especially iso and export) to completely block the whole thing when being unavailable. To many users suffered from this in the last two years I participate at thi

Re: [ovirt-users] : password authentication failed for user "engine"

2014-09-13 Thread Alon Bar-Lev
If this is an attempt to install over a previous installation, please try to remove /etc/ovirt-engine/engine.conf.d/*.conf, and setup again. - Original Message - > From: "Ramon Ramirez-Linan" > To: users@ovirt.org > Sent: Saturday, September 13, 2014 5:51:23 PM > Subject: Re: [ovirt-use

Re: [ovirt-users] [ovirt-devel] feature review - ReportGuestDisksLogicalDeviceName

2014-09-13 Thread Dan Kenigsberg
On Wed, Sep 03, 2014 at 08:50:12AM +0200, Michal Skrivanek wrote: > > On Sep 2, 2014, at 21:03 , Nir Soffer wrote: > > > - Original Message - > >> From: "Michal Skrivanek" > >> To: "Liron Aravot" , "Dan Kenigsberg" > >> , "Federico Simoncelli" > >> , "Vinzenz Feenstra" > >> Cc: users@

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nir Soffer
- Original Message - > From: "Nicolas Ecarnot" > To: users@ovirt.org > Sent: Saturday, September 13, 2014 4:53:03 PM > Subject: Re: [ovirt-users] [RFI] oVirt 3.6 Planning > > Le 12/09/2014 14:22, Itamar Heim a écrit : > > With oVirt 3.5 nearing GA, time to ask for "what do you want to see

Re: [ovirt-users] : password authentication failed for user "engine"

2014-09-13 Thread Ramon Ramirez-Linan
[image: logo] Navteca Ramon Ramirez-Linan C: 301.789.9139 O: 202.505.1553 *www.navteca.com * 6301 Ivy Lane, Greenbelt, MD 20770 Suite 700 [image: script] [image: https://s3.amazonaws.com/www.navteca.com/img/certified.png] On Sat, Sep 13, 2014 at 10:32 AM, Ramon Ramirez-L

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nicolas Ecarnot
Le 12/09/2014 14:22, Itamar Heim a écrit : With oVirt 3.5 nearing GA, time to ask for "what do you want to see in oVirt 3.6"? Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users For God's sake, plea

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Mohyedeen Nazzal
One more thing,, Being able to attach USB dongles from the admin portal... Thanks, Mohyedeen. On Sat, Sep 13, 2014 at 3:32 PM, Mohyedeen Nazzal < mohyedeen.naz...@gmail.com> wrote: > When VMs goes to unknown status, all control options are grayed, and the > only way to fix this is to update the

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Mohyedeen Nazzal
When VMs goes to unknown status, all control options are grayed, and the only way to fix this is to update the Database manually, it will be nice to be able to force the engine to poweroff the VM from admin portal. Thanks, Mohyedeen. On Sat, Sep 13, 2014 at 12:27 PM, Nir Soffer wrote: > - O

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-13 Thread Nir Soffer
- Original Message - > From: "Sven Kieske" > To: users@ovirt.org > Sent: Friday, September 12, 2014 4:53:46 PM > Subject: Re: [ovirt-users] [RFI] oVirt 3.6 Planning > > +1! > > I really would like to see a fast working way to create, manage > and use ceph in ovirt. I don't know if implem