Re: [ovirt-users] Import FC Storage as iSCSI

[Raul Laansoo]

Hi.

I have managed to get my oVirt node running using oVirt Node Hypervisor 
3.1.0_master-20140707.0. I hope this is not causing following issue, but this 
Is the only way for me to test 3.5.

When I try to import existing FC storage domain I get errors on Engine (see 
attached log).

Regards.

Raul
- Original Message -
> From: "Raul Laansoo" 
> To: "Maor Lipchuk" 
> Sent: Monday, 27 October, 2014 11:29:40 AM
> Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> 
> I have set this to 3.4 because I still use ovirt-node-iso from oVirt 3.4. For
> some reason I can't set cluster compatibility to 3.4 and with cluster 3.5
> node installation fails. I will install node from 3.5 iso and try again.
> 
> - Original Message -
> > From: "Maor Lipchuk" 
> > To: "Raul Laansoo" 
> > Cc: "users" 
> > Sent: Monday, 27 October, 2014 10:50:21 AM
> > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > 
> > Which Data Center version are you using to attach the Storage Domain to?
> > If the storage domain meta data indicates that it is already attached to
> > another Data Center (after DR for example). then you the attach of it will
> > only be supported for Data Center 3.5.
> > 
> > Regards,
> > Maor
> > 
> > - Original Message -
> > > From: "Raul Laansoo" 
> > > To: "Maor Lipchuk" 
> > > Cc: "users" 
> > > Sent: Monday, October 27, 2014 10:07:18 AM
> > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > 
> > > When I try to import existing FC storage domain, which consists of two
> > > NetAPP
> > > LUN-s cloned from NetAPP snapshots, I get:
> > > 
> > > Error while executing action Attach Storage Domain: The Domain is already
> > > used by another Data Center.
> > > In order to use it, detach it from the Data Center it is currently
> > > attached
> > > to.
> > > 
> > > Does this mean, that to import existing storage domain, it must be first
> > > (cleanly) detached?
> > > 
> > > Regards.
> > > 
> > > - Original Message -
> > > > From: "Maor Lipchuk" 
> > > > To: "Raul Laansoo" 
> > > > Cc: "users" 
> > > > Sent: Monday, 27 October, 2014 9:26:50 AM
> > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > - Original Message -
> > > > > From: "Raul Laansoo" 
> > > > > To: "Maor Lipchuk" 
> > > > > Cc: "users" 
> > > > > Sent: Monday, October 27, 2014 8:43:31 AM
> > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > 
> > > > > Hi.
> > > > > 
> > > > > Thank you for looking into this. Does this only affect the import or
> > > > > influences also the process of attaching storage domain to Data
> > > > > Center
> > > > > (you
> > > > > can't attach iSCSI Storage Domain to FC DC and vice versa?)
> > > > 
> > > > Hi Raul,
> > > > 
> > > > for now, the fix should include the ability to "switch" storage types
> > > > only
> > > > through the import process,and not through the attach process.
> > > > I think that the import process might be enough because you can always
> > > > remove
> > > > the Storage Domain and re-import it to the setup as another storage
> > > > type.
> > > > 
> > > > > If I understand
> > > > > correctly, the Data Center's storage type is set at the
> > > > > initialization
> > > > > time,
> > > > > when the first storage domain is attached and you can't change it
> > > > > afterwards. In previous versions you could clearly see the DC storage
> > > > > type,
> > > > > now it's not visible.
> > > > 
> > > > You are right, mixed type data center is a feature introduced in
> > > > version
> > > > 3.4
> > > > (see http://www.ovirt.org/Features/Mixed_Types_Data_Center),
> > > > There should be only two type of Data Center local and shared.
> > > > The import Storage Domain feature is supported only from version 3.5 so
> > > > it
> > > > can only be supported in mixed type Data Centers.
> > > > 
> > > > 
> > > > > 
> > > > > Regards.
> > > > > Raul
> > > > > 
> > > > > - Original Message -
> > > > > > From: "Maor Lipchuk" 
> > > > > > To: "Itamar Heim" 
> > > > > > Cc: "raul laansoo" , "Vered Volansky"
> > > > > > , "users" 
> > > > > > Sent: Monday, 27 October, 2014 2:16:14 AM
> > > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > - Original Message -
> > > > > > > From: "Itamar Heim" 
> > > > > > > To: "Maor Lipchuk" , "raul laansoo"
> > > > > > > 
> > > > > > > Cc: "Vered Volansky" , "users"
> > > > > > > 
> > > > > > > Sent: Sunday, October 26, 2014 9:34:14 PM
> > > > > > > Subject: Re: [ovirt-users] Import FC Storage as iSCSI
> > > > > > > 
> > > > > > > On 10/26/2014 03:58 PM, Maor Lipchuk wrote:
> > > > > > > > Hi Raul,
> > > > > > > >
> > > > > > > > The storage domain type is determined from the Storage Domain
> > > > > > > > meta
> > > > > > > > data.
> > > > > > > > If your storage domain was previously an FC Storage Domain, the
> > > > > > > > import
> > > > > > > > proce

Re: [ovirt-users] DWH and reports

[Yedidyah Bar David]

- Original Message -
> From: "Koen Vanoppen" 
> To: users@ovirt.org
> Sent: Tuesday, November 4, 2014 7:59:43 AM
> Subject: Re: [ovirt-users] DWH and reports
> 
> Ok, after waking up decently I think I also figured out the 1/3... It's
> installed on ovirt... In Test/Dev... The only one I can see... Is there a
> way so I can also see the other ones?
> 
> Now I just need to know how to change the link :-D
> 
> 2014-11-04 6:46 GMT+01:00 Koen Vanoppen < vanoppen.k...@gmail.com > :
> 
> 
> 
> Ok, that I figured out... Is there a way to change the place where the
> "reports link" is pointing at?
> 
> But now I have a another issue. The reports only sees 1 domain. We have 3...
> Anybody a idea how this can happen?
> 
> Kind regards,
> 
> 2014-11-04 6:28 GMT+01:00 Koen Vanoppen < vanoppen.k...@gmail.com > :
> 
> 
> 
> Hi All,
> 
> We recently updated our ovirt installation from 3.4.3 to 3.5 and this went
> very smooth, so thanks for that!
> But now I wanted to try to install the DWH and reports on 2 different vm's.

Please be more specific.

You had a machine for the engine. Did you already have DWH and/or Reports
there?

You installed dwh and reports on new VMs. Did you also run engine-setup there?
And you were careful to not install (and if you installed, to not configure,
when engine-setup asked you) an engine there?

If not solved, please post all setup logs - /var/log/ovirt-engine/setup/* from
all relevant machines.

Thanks and best,
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] hosted engine , how to make changes to the VM post deploy

[Jiri Moskovcak]

On 11/04/2014 04:38 AM, Alastair Neil wrote:

I have successfully migrated my standalone ovirt into a hosted
instance.  I have some questions and comments.


Is there a mechanism to make changes to the hosted engine VM post
deploy.  I would like to change some of the VM configuration choices.

I tried setting the maintenance mode to "global" and then editing:

  /etc/ovirt-hosted-engine/vm.conf

I changed something simple: the VM name.  Then I copied the file to the
two other HA hosts and set the maintenance mode to "none".



- you need to kill the vm and restart it after you edit the configuation

hosted-engine --vm-shutdown
hosted-engine --vm-start

- also you can use virsh [1] to edit the vm

[1] 
http://wiki.libvirt.org/page/FAQ#Where_are_VM_config_files_stored.3F_How_do_I_edit_a_VM.27s_XML_config.3F




No joy the VM hostname remains unchanged in the portal.


Also, the notification system is horrendously spammy, I get email
notification of each state change from each of the HA hosts, surely this
is not intentional.  Is there some way to control this?



- that's a bug which should be fixed by this patch 
http://gerrit.ovirt.org/#/c/33518/


--Jirka


-Thanks,  Alastair





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] qemu-kvm from Jenkins - renamed packages to rhev?

[Sandro Bonazzola]

Il 03/11/2014 23:01, Itamar Heim ha scritto:
> On 11/03/2014 10:58 PM, Giorgio Bersano wrote:
>> 2014-10-30 23:42 GMT+01:00 Itamar Heim :
>>> On 10/30/2014 09:05 PM, Trey Dockendorf wrote:

 In the past in order to have live snapshots work in CentOS 6.5 I had to
 use RPMs from
 http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/.  I've
 noticed now that the RPMs have been renamed and no longer match the
 names of those distributed by CentOS.  Are the CentOS builds of QEMU now
 supporting live snapshots, or are these builds in Jenkins still required?

 Thanks,
 - Trey


 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

>>>
>>> native centos - no
>>> the jenkins job isn't needed as well as the build is now in the repo (and
>>> 3.5 now requires qemu-kvm-rhev to avoid such problems)
>>> http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6Server/x86_64/
>>
>> Hi,
>> I would like to point out that - thanks to the CentOS 6.6 release -
>> qemu-{img,kvm}*0.12.1.2-2.448.el6_6.x86_64 are now available but the
>> qemu*rhev* in the 3.5 repository you mentioned are still stuck at
>> 0.12.1.2-2.415.el6_5.14.x86_64 .
>> Is there any possibility of an upgrade?
>>
>> TIA, Giorgio.
>>
> 
> Eyal - can someone please handle.
> it seems http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/configure 
> has:
> 
> # As soon 6.6 and others get released uncomment each release below
> # unfortunately if we uncomment and it don't get files jenkins understand it 
> failed.
> for version in '6.5' # '6.6' '6.7' '6.8' '6.9'

I'm on it

> 
> Thanks,
>Itamar
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt Node migration

[Maor Lipchuk]

- Original Message -
> From: "Itamar Heim" 
> To: "Juan Carlos YJ Lin" , users@ovirt.org, "Maor 
> Lipchuk" , "Allon
> Mureinik" 
> Sent: Tuesday, November 4, 2014 3:00:06 AM
> Subject: Re: [ovirt-users] Ovirt Node migration
> 
> On 11/01/2014 11:17 AM, Juan Carlos YJ. Lin wrote:
> > I like to know if a node adopted by a ovirt engine can safely adopted by
> > a new ovirt engine, keeping all running vms in local storage mode, ovirt
> > node 3.4, new ovirt engine 3.5
> 
> 3.4 - no, unless you export/import all vm's.
> 3.5 - should be ok via the import/export storage domain, though need to
> make sure it was tested with local storage. maor/allon?
> 
> 

yes, that should be supported with local storage domain, though keep in mind 
the VMs will not keep running, you will have to start them over again.

You can take a look at the documentation and the demo for import local storage 
domain:
Documentation: 
http://www.ovirt.org/Features/ImportStorageDomain#Work_flow_for_recovery_of_local_Data_Center_-_UI_flow
Demo: http://www.youtube.com/watch?v=T03ai6FrMI4#t=121

Regards,
Maor
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] DWH and reports

[Koen Vanoppen]

Ok, after waking up decently I think I also figured out the 1/3... It's
installed on ovirt... In Test/Dev... The only one I can see... Is there a
way so I can also see the other ones?

Now I just need to know how to change the link :-D

2014-11-04 6:46 GMT+01:00 Koen Vanoppen :

> Ok, that I figured out... Is there a way to change the place where the
> "reports link" is pointing at?
>
> But now I have a another issue. The reports only sees 1 domain. We have
> 3... Anybody a idea how this can happen?
>
> Kind regards,
>
> 2014-11-04 6:28 GMT+01:00 Koen Vanoppen :
>
>> Hi All,
>>
>> We recently updated our ovirt installation from 3.4.3 to 3.5 and this
>> went very smooth, so thanks for that!
>> But now I wanted to try to install the DWH and reports on 2 different
>> vm's. The installation went well, no errors there, but when I try to open
>> the reports portal afterwards, I get a 404 and this is in the server.log on
>> the engine host:
>> Any ideas what it could be?
>>
>> tail -f /var/log/ovirt-engine/server.log
>> at
>> org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
>> [jbossweb-7.0.13.Final.jar:]
>> at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
>> [jbossweb-7.0.13.Final.jar:]
>> at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
>> [jbossweb-7.0.13.Final.jar:]
>> at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]
>>
>> 2014-11-04 06:24:22,299 ERROR
>> [org.apache.catalina.core.ContainerBase.[default-host]]
>> (ajp--127.0.0.1-8702-18) Exception sending request destroyed lifecycle
>> event to listener instance of class org.jboss.weld.servlet.WeldListener:
>> java.lang.NullPointerException
>> at
>> org.jboss.weld.context.AbstractBoundContext.deactivate(AbstractBoundContext.java:71)
>> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
>> at
>> org.jboss.weld.context.http.HttpRequestContextImpl.deactivate(HttpRequestContextImpl.java:86)
>> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
>> at
>> org.jboss.weld.servlet.WeldListener.requestDestroyed(WeldListener.java:103)
>> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
>> at
>> org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
>> [jbossweb-7.0.13.Final.jar:]
>> at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
>> [jbossweb-7.0.13.Final.jar:]
>> at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
>> [jbossweb-7.0.13.Final.jar:]
>> at
>> org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
>> [jbossweb-7.0.13.Final.jar:]
>> at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]
>>
>>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] DWH and reports

[Koen Vanoppen]

Ok, that I figured out... Is there a way to change the place where the
"reports link" is pointing at?

But now I have a another issue. The reports only sees 1 domain. We have
3... Anybody a idea how this can happen?

Kind regards,

2014-11-04 6:28 GMT+01:00 Koen Vanoppen :

> Hi All,
>
> We recently updated our ovirt installation from 3.4.3 to 3.5 and this went
> very smooth, so thanks for that!
> But now I wanted to try to install the DWH and reports on 2 different
> vm's. The installation went well, no errors there, but when I try to open
> the reports portal afterwards, I get a 404 and this is in the server.log on
> the engine host:
> Any ideas what it could be?
>
> tail -f /var/log/ovirt-engine/server.log
> at
> org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
> [jbossweb-7.0.13.Final.jar:]
> at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
> [jbossweb-7.0.13.Final.jar:]
> at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
> [jbossweb-7.0.13.Final.jar:]
> at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]
>
> 2014-11-04 06:24:22,299 ERROR
> [org.apache.catalina.core.ContainerBase.[default-host]]
> (ajp--127.0.0.1-8702-18) Exception sending request destroyed lifecycle
> event to listener instance of class org.jboss.weld.servlet.WeldListener:
> java.lang.NullPointerException
> at
> org.jboss.weld.context.AbstractBoundContext.deactivate(AbstractBoundContext.java:71)
> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
> at
> org.jboss.weld.context.http.HttpRequestContextImpl.deactivate(HttpRequestContextImpl.java:86)
> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
> at
> org.jboss.weld.servlet.WeldListener.requestDestroyed(WeldListener.java:103)
> [weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
> at
> org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
> [jbossweb-7.0.13.Final.jar:]
> at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
> [jbossweb-7.0.13.Final.jar:]
> at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
> [jbossweb-7.0.13.Final.jar:]
> at
> org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
> [jbossweb-7.0.13.Final.jar:]
> at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] DWH and reports

[Koen Vanoppen]

Hi All,

We recently updated our ovirt installation from 3.4.3 to 3.5 and this went
very smooth, so thanks for that!
But now I wanted to try to install the DWH and reports on 2 different vm's.
The installation went well, no errors there, but when I try to open the
reports portal afterwards, I get a 404 and this is in the server.log on the
engine host:
Any ideas what it could be?

tail -f /var/log/ovirt-engine/server.log
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
[jbossweb-7.0.13.Final.jar:]
at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
[jbossweb-7.0.13.Final.jar:]
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
[jbossweb-7.0.13.Final.jar:]
at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]

2014-11-04 06:24:22,299 ERROR
[org.apache.catalina.core.ContainerBase.[default-host]]
(ajp--127.0.0.1-8702-18) Exception sending request destroyed lifecycle
event to listener instance of class org.jboss.weld.servlet.WeldListener:
java.lang.NullPointerException
at
org.jboss.weld.context.AbstractBoundContext.deactivate(AbstractBoundContext.java:71)
[weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
at
org.jboss.weld.context.http.HttpRequestContextImpl.deactivate(HttpRequestContextImpl.java:86)
[weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
at
org.jboss.weld.servlet.WeldListener.requestDestroyed(WeldListener.java:103)
[weld-core-1.1.5.AS71.Final.jar:2012-02-10 15:31]
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
[jbossweb-7.0.13.Final.jar:]
at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
[jbossweb-7.0.13.Final.jar:]
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
[jbossweb-7.0.13.Final.jar:]
at
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
[jbossweb-7.0.13.Final.jar:]
at java.lang.Thread.run(Thread.java:744) [rt.jar:1.7.0_51]
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] hosted engine , how to make changes to the VM post deploy

[Alastair Neil]

I have successfully migrated my standalone ovirt into a hosted instance.  I
have some questions and comments.


Is there a mechanism to make changes to the hosted engine VM post deploy.
I would like to change some of the VM configuration choices.

I tried setting the maintenance mode to "global" and then editing:

 /etc/ovirt-hosted-engine/vm.conf

I changed something simple: the VM name.  Then I copied the file to the two
other HA hosts and set the maintenance mode to "none".

No joy the VM hostname remains unchanged in the portal.


Also, the notification system is horrendously spammy, I get email
notification of each state change from each of the HA hosts, surely this is
not intentional.  Is there some way to control this?

-Thanks,  Alastair
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Ovirt 3.5 Default Cluster no CPU type

[Juan Carlos YJ. Lin]

Installed Ovirt 3.5 Hosted Engine, 
During first attemp fail network issue 
Durign second attemp, run ok, installs ans engine up 
But Default Cluster created withou CPU type and when Hosted Engine try to adopt 
the system fails 

Create a new cluster with CPU type, but also cannot adopt the hosted engine 
vdsm 

IS a bug? 

Juan Carlos Lin 
Unisoft S.A. 
+595-993-288330 


---
"Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente"
"Aviso: Este mensaje es dirigido para su destinatario y contiene informaciones 
que no pueden ser usadas por otras personas que no sean su(s) destinatario(s). 
La retransmisión del contenido no está autorizada fuera del contexto de su 
envío y a quien corresponde. El uso no autorizado de la información en este 
mensaje se halla penado por las leyes vigentes en todo el mundo. Si ha recibido 
este mensaje por error, por favor bórrala y notifique al remitente en la 
brevedad posible. El contenido de este mensaje no es responsabilidad de la 
Empresa y debe ser atribuido siempre a su autor. Gracias."
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Ovirt Node migration

[Itamar Heim]

On 11/01/2014 11:17 AM, Juan Carlos YJ. Lin wrote:

I like to know if a node adopted by a ovirt engine can safely adopted by
a new ovirt engine, keeping all running vms in local storage mode, ovirt
node 3.4, new ovirt engine 3.5


3.4 - no, unless you export/import all vm's.
3.5 - should be ok via the import/export storage domain, though need to 
make sure it was tested with local storage. maor/allon?


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] qemu-kvm from Jenkins - renamed packages to rhev?

[Itamar Heim]

On 11/03/2014 10:58 PM, Giorgio Bersano wrote:

2014-10-30 23:42 GMT+01:00 Itamar Heim :

On 10/30/2014 09:05 PM, Trey Dockendorf wrote:


In the past in order to have live snapshots work in CentOS 6.5 I had to
use RPMs from
http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/.  I've
noticed now that the RPMs have been renamed and no longer match the
names of those distributed by CentOS.  Are the CentOS builds of QEMU now
supporting live snapshots, or are these builds in Jenkins still required?

Thanks,
- Trey


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



native centos - no
the jenkins job isn't needed as well as the build is now in the repo (and
3.5 now requires qemu-kvm-rhev to avoid such problems)
http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6Server/x86_64/


Hi,
I would like to point out that - thanks to the CentOS 6.6 release -
qemu-{img,kvm}*0.12.1.2-2.448.el6_6.x86_64 are now available but the
qemu*rhev* in the 3.5 repository you mentioned are still stuck at
0.12.1.2-2.415.el6_5.14.x86_64 .
Is there any possibility of an upgrade?

TIA, Giorgio.



Eyal - can someone please handle.
it seems 
http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/configure has:


# As soon 6.6 and others get released uncomment each release below
# unfortunately if we uncomment and it don't get files jenkins 
understand it failed.

for version in '6.5' # '6.6' '6.7' '6.8' '6.9'

Thanks,
   Itamar
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] qemu-kvm from Jenkins - renamed packages to rhev?

[Giorgio Bersano]

2014-10-30 23:42 GMT+01:00 Itamar Heim :
> On 10/30/2014 09:05 PM, Trey Dockendorf wrote:
>>
>> In the past in order to have live snapshots work in CentOS 6.5 I had to
>> use RPMs from
>> http://jenkins.ovirt.org/job/qemu-kvm-rhev_create-rpms_el6/.  I've
>> noticed now that the RPMs have been renamed and no longer match the
>> names of those distributed by CentOS.  Are the CentOS builds of QEMU now
>> supporting live snapshots, or are these builds in Jenkins still required?
>>
>> Thanks,
>> - Trey
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> native centos - no
> the jenkins job isn't needed as well as the build is now in the repo (and
> 3.5 now requires qemu-kvm-rhev to avoid such problems)
> http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6Server/x86_64/

Hi,
I would like to point out that - thanks to the CentOS 6.6 release -
qemu-{img,kvm}*0.12.1.2-2.448.el6_6.x86_64 are now available but the
qemu*rhev* in the 3.5 repository you mentioned are still stuck at
0.12.1.2-2.415.el6_5.14.x86_64 .
Is there any possibility of an upgrade?

TIA, Giorgio.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Add multiple files to a VM via cloud-init

[Branimir Pejakovic]

On Fri, Oct 31, 2014 at 11:00 PM, Juan Hernandez 
wrote:

> On 10/31/2014 06:47 PM, Branimir Pejakovic wrote:
> >
> >
> >
> > On Thu, Oct 30, 2014 at 12:52 PM, Branimir Pejakovic
> > mailto:branim...@gmail.com>> wrote:
> >
> >
> >
> > On Thu, Oct 30, 2014 at 12:39 PM, Shahar Havivi  > > wrote:
> >
> > On 30.10.14 12:30, Branimir Pejakovic wrote:
> > > On Thu, Oct 30, 2014 at 12:02 PM, Shahar Havivi
> > mailto:shah...@redhat.com>> wrote:
> > >
> > > > On 30.10.14 10:06, Branimir Pejakovic wrote:
> > > > > On Thu, Oct 30, 2014 at 7:22 AM, Shahar Havivi
> > mailto:shah...@redhat.com>>
> > > > wrote:
> > > > >
> > > > > > On 29.10.14 17:35, Branimir Pejakovic wrote:
> > > > > > > Hi list,
> > > > > > >
> > > > > > > I was wondering is there a way to add multiple files
> > to a vm via
> > > > > > cloud-init
> > > > > > > using python SDK. I was able to add /etc/resolv.conf
> and
> > > > additionally I
> > > > > > > would like to add config files for NICs (ifcfg-ethX)
> > with appropriate
> > > > > > > values (ip,gw,netmask). I used an example given here:
> > > > > > > http://www.ovirt.org/Features/Cloud-Init_Integration
> . But
> > > > > > unfortunately I
> > > > > > > cannot do the same thing If I want to write multiple
> > files to a vm in
> > > > > > > params.Action class.
> > > > > > >
> > > > > > > Thank you in advance!
> > > > > > you can use the custom script text box in oVirts
> > cloud-init section,
> > > > > > there you can add any cloud-init section - adding files
> > examples can be
> > > > > > found
> > > > > > here:
> > > > > >
> > > > > >
> > > >
> >
> http://cloudinit.readthedocs.org/en/latest/topics/examples.html#writing-out-arbitrary-files
> > > > > >
> > > > > >   Shahar Havivi.
> > > > > >
> > > > > >
> > > > > Hi Shahar,
> > > > >
> > > > > Thank you for the reply.
> > > > >
> > > > > To be honest I knew for those scripts but I want to do it
> > in automate
> > > > > fashion just like in that example that I put in my
> > original message. I
> > > > have
> > > > > tried to specify in params.Files class multiple files:
> > > > >
> > > > > vm_file1 = params.Files(file=[params.File(name = 'file1',
> > content =
> > > > > file1_content, type_= 'PLAINTEXT')])
> > > > > vm_file2 = params.Files(file=[params.File(name = 'file2',
> > content =
> > > > > file2_content, type_= 'PLAINTEXT')])
> > > > >
> > > > > and then give them as arguments to params.CloudInit _init_
> > constructor
> > > > > (files=...)  just like in that example above but it seems
> > that I am doing
> > > > > something wrong because it does not write multiple files -
> > it writes only
> > > > > when you specify one file all right. The exception is
> > "Error: 'list'
> > > > object
> > > > > has no attribute 'export'" (I tried to specify those files
> > as a list -
> > > > > files=[vm_file1,vm_file2]).
> > > > >
> > > > > Thanks for any help.
> > > > The custom script is currently the only option to add files
> > via Cloud-Init
> > > >
> > > > Thanks,
> > > >   Shahar Havivi.
> > > >
> > > >
> > > Hi Shahar,
> > >
> > > Granted. But the example in python
> > > http://www.ovirt.org/Features/Cloud-Init_Integration uses
> > custom script :)
> > > I just want to know how to do the same thing in case when I
> > want to write
> > > more than one file to a VM - and yes  - all those multiple
> > files that I
> > > want to write are specified via custom scripts.
> > >
> > > From the link - (The "Python SDK" paragraph: scontent object
> > holds the
> > > custom script):
> > >
> > >  scontent = "write_files:\n-   content: |\nsearch
> > > example.com \nnameserver
> > 10.10.10.1\nnameserver
> > > 10.10.10.2\npath: /etc/resolv.conf"
> > >
> > > For example (and just for example), I want to write to
> > /etc/issue and
> > > /etc/hosts not only /etc/resolv.conf. In essence, when vm goes
> > to run-once
> > > mode I want to write more than one file to a vm via Python
> (using
> > > CloudInit) in automated fashion (and not touching oVirt GUI at
> > all).
> > You don't need to use the GUI,
> > the sdks initialization hav

Re: [ovirt-users] 3.5 install issues: The VDSM host was found in a failed state

[Robert Story]

On Tue, 28 Oct 2014 13:05:07 -0400 (EDT) Simone wrote:
ST> Thanks for the report Robert,
ST> I think it can be quite related to this one:
ST> https://bugzilla.redhat.com/show_bug.cgi?id=1086032
ST> 
ST> It seams that currently, if we have more than one required networks, we
ST> are not able to add an host. And it's not just on hosted-engine setup:
ST> currently it seams that it doesn't work also starting it from the web
ST> admin gui. I'm working on that.

Hmm.. When you say 'required network', I think 'required' in terms of the
oVirt gui. That wouldn't apply to my case, because ovirt hasn't been
installed yet. The underlying host has multiple networks, but nothing has
been configured in ovirt (unless the install detects and adds them).


Robert

-- 
Senior Software Engineer @ Parsons


signature.asc
Description: PGP signature
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt Monthly Newsletter: October 2014

[Brian Proffitt]

October 2014 was a big month for oVirt. A new release, a new workshop, a new 
way of installing oVirt... there was nothing about October that didn't feel 
like success for the community and the software. As we start looking ahead to 
oVirt 3.6, here's a look back at one memorable month!


In the Community


oVirt is very happy to announce its participation in the GNOME Foundation's 
Outreach Program for Women: http://www.ovirt.org/Outreach_Program_for_Women 
Registration closed on Oct. 22, and have two excellent participants working 
with the oVirt community.

With all of the work being done on oVirt 3.5, our development team took the 
time to create some videos and deep-dive hangouts about 3.5 features: 
http://community.redhat.com/blog/2014/09/a-cinematic-peek-at-ovirt-3-5/

October 16 was the next big event for the oVirt community, the 2014 KVM Forum 
oVirt Workshop in Düsseldorf, Germany. Learn more at 
http://community.redhat.com/blog/2014/10/ovirt-workshop-2014/ and 
http://ow.ly/i/7gCmZ

Other October events for oVirt included:
 
* LinuxCon EU, Düsseldorf, Germany, Oct. 13-15
http://events.linuxfoundation.org/events/linuxcon-europe

* CloudOpen Europe, Düsseldorf, Germany, Oct. 13-15
http://events.linuxfoundation.org/events/cloudopen-europe

* KVM Forum, Düsseldorf, Germany, Oct. 14-16
http://events.linuxfoundation.org/events/kvm-forum

* All Things Open, Raleigh, North Carolina, Oct. 22-23
http://allthingsopen.org/

* Open World Forum 2014, Paris, France, Oct. 30-31
http://www.openworldforum.paris/en/

Douglas Landsgraf reveals his take on Latinoware 2014 
(http://dougsland.livejournal.com/123871.html)

In November, oVirt will be featured at more events:

* OpenAlt.cz, Brno, Czech Republic, Nov. 1-2
http://www.openalt.cz/

* LISA 14, Seattle, Washington, Nov. 9-14
https://www.usenix.org/conference/lisa14

* DevOps at Red Hat #2, Nov. 18
http://www.geektime.co.il/events/devops-at-red-hat-2/

* DevOps Days, Tel Aviv, Nov. 23-24
http://devopsdays.org/events/2014-telaviv/

And for the future, there's a Call for Particpation for the IaaS DevRoom at 
FOSDEM'15 (http://lists.ovirt.org/pipermail/users/2014-October/028644.html)!

-
oVirt Software Milestones
-

On October 19, the journey to our next release was complete, and oVirt 3.5 was 
released! http://community.redhat.com/blog/2014/10/ovirt-3-5-rolls-out/

Along with the release of oVirt 3.5, a new User Guide 
(http://www.ovirt.org/OVirt_User_Guide) and Administrator Guide 
(http://www.ovirt.org/OVirt_Administration_Guide) were released, ready to help 
people using oVirt faster!

Earlier in October, ovirt-3.5 ovirt-guest-agent Linux builds were also made 
available:
http://permalink.gmane.org/gmane.comp.emulators.ovirt.user/22322


Deep Dives and Technical Discussions


oVirt and Docker are proving to be a great combination! Moran Goldboim rolls 
out a two-part blog on how you can install oVirt as a Docker container today! 
(http://community.redhat.com/blog/2014/10/ovirt-dockerized/, 
http://community.redhat.com/blog/2014/10/ovirt-dockerized-part-2/)

Jason Brooks continues his Up and Running series with a look on how to install 
and use oVirt 3.5 
(http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/)!

You can also learn about what's new in oVirt 3.5 in Korean 
(https://ovirtkorea.wordpress.com/2014/10/26/whatsnew_in_ovirt35/).

Like oVirt? Want to tell your friends and colleagues? Use our slide 
presentation as a 
basis to share oVirt with the community: 
http://www.ovirt.org/OVirt_Slide_Decks#Introduction_to_oVirt_Deck

The oVirt 3.5 Features and Deep Dives YouTube playlist has been expanded! 
http://ow.ly/DrBlt

Douglas Landsgraf wrote a nice write up abaout how Hosted Engine is going to 
work on oVirt Node http://dougsland.livejournal.com/124084.html

Discover moVirt: the mobile interface for oVirt 
(http://events.linuxfoundation.org/sites/events/files/slides/movirt.pdf)

RaspberryPi + SPICE + oVirt = Red Hat Powered VDI. Learn more in this video 
(http://www.spice-space.org/vdi.html)!

Some answers to the question: HA Cluster Gluster or DRBD iSCSI for oVirt 3.5 
(http://www.redgrid.net/uncategorized/ovirt-3-5-ha-cluster-gluster-or-drbd-iscsi-part1/).

How to get directory services easily connected to oVirt with Docker and FreeIPA:
http://www.projectatomic.io/blog/2014/10/containerized-directory-services-with-docker-and-freeipa/

Seven steps to VM management with oVirt (in German) 
(http://www.datacenter-insider.de/index.cfm?pid=13397&pk=464532&p=1).

Find out more about the Python API for oVirt and RHEV (in Italian) 
(http://www.extraordy.com/introduzione-alle-python-api-per-rhev/).

Check out this Russian review of oVirt 3.5: http://youtu.be/kUqdKF9eW7Y


-- 
Brian Proffitt

Community Liaison
oVirt
Open Source and Standards, Red Hat - http://community.redhat.com
Phone: +1 574 3

Re: [ovirt-users] [RFI] oVirt 3.6 Planning

[Dan Kenigsberg]

On Sun, Sep 14, 2014 at 03:17:39PM +0300, Itamar Heim wrote:
> On 09/12/2014 03:22 PM, Itamar Heim wrote:
> >With oVirt 3.5 nearing GA, time to ask for "what do you want to see in
> >oVirt 3.6"?
> >
> 
> Even the short list of items mentions so far are big features we would need
> to do justice with.
> this means probably a slightly longer cycle than the 6 months we currently
> do.

We're not so good in keeping up with deadlines - our recent 3.5 version
slipped for 2.5 months past the original plan. With longer cycles, this
is even harder to control.

Can we instead break the "heavier" features to smaller phases, that are
easier to maintain, and deliver the complete feature in 3.7?

> with many of the features requiring way newer versions of some of the
> components, I think we should plan for "3.6 cluster" to require an .el7 host
> (expecting even 7.1 to be out before we release oVirt 3.6).
> 
> so i want us to plan for:
> - oVirt 3.6 supports .el6 and .el7 hosts in 3.5 cluster (and for fedora
>   - fc20?)
> - oVirt 3.6 supports .el7 in 3.6 cluster (and for fedora - fc21?)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] .el6/el7 support in 3.6 for hosts (was Proposing fix for EL6 m2crypto memory leak)

[Itamar Heim]

On 10/31/2014 10:45 AM, Sven Kieske wrote:



On 30/10/14 23:49, Itamar Heim wrote:

On 10/28/2014 05:23 PM, Dan Kenigsberg wrote:

On Tue, Oct 28, 2014 at 12:42:19PM +0100, Sven Kieske wrote:



On 28/10/14 12:28, Daniel Helgenberger wrote:

But it is a short term solution until the issue is fixed or
El6 obsoleted (well, this might be quite soon for a protect like
oVirt?)


Well I doubt EL6 support will be dropped from ovirt, as downstream
still requires it to work on EL6 in the future, EL6 is still in
production phase.


It won't happen in ovirt-3.6, but support for el6 would be dropped at


actually:
http://lists.ovirt.org/pipermail/users/2014-September/027421.html


interesting

what about engine side? when will support get dropped there?


no, this is about hosts only.


This is very important because it most likely requires to install a new
server with el7 and recover engine db there, which needs some planning.


some point in the future. Backporting packages an re-solving bugs that
have been already solved in el7 is little fun, and drains our
developement and QE resources. We should start thinking how and when to
phase el6 out.

Dan.





___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt 3.5 on Ubuntu? [oVirt Dockerized]

[Moran Goldboim]

Deploying oVirt engine has never been so easy.
Checkout oVirt dockerized projects on docker hub[1] and github[2].
You can find some overview on oVirt-dockerized blog[3]
Please let me know if you find it useful.

Cheers,
Moran. 

[1] https://hub.docker.com/u/mgoldboi/
[2] https://github.com/mgoldboi/oVirt-Dockerized
[3] http://community.redhat.com/blog/2014/10/ovirt-dockerized/
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Please add BZ to known issues of 3.5?

[Sandro Bonazzola]

Il 03/11/2014 13:01, Daniel Helgenberger ha scritto:
> Hello Sandro,
> 
> maybe worth adding to Release notes, known issues:
> 
> https://bugzilla.redhat.com/show_bug.cgi?id=1157749#c15
> 
> Bottom line:
> Foreman integration requires min. EL6.6+ engine because of open-jdk 
> version. This is not an oVirt - issue but java.

Added.

> 
> Cheers
> 


-- 
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Please add BZ to known issues of 3.5?

[Daniel Helgenberger]

Hello Sandro,

maybe worth adding to Release notes, known issues:

https://bugzilla.redhat.com/show_bug.cgi?id=1157749#c15

Bottom line:
Foreman integration requires min. EL6.6+ engine because of open-jdk 
version. This is not an oVirt - issue but java.

Cheers
-- 
Daniel Helgenberger
m box bewegtbild GmbH

P: +49/30/2408781-22
F: +49/30/2408781-10

ACKERSTR. 19
D-10115 BERLIN


www.m-box.de  www.monkeymen.tv

Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Certificate Enrollment Failed

[Dinuwan]

Hi Everyone, 

I managed to resolve the error with Alon's tip. There was actually a 
serial.txt.old file created (no idea how). What I did was put the same value in 
the old file in the new one and re-installed the host and it was successful! 

Thanks!

-Original Message-
From: Alon Bar-Lev [mailto:alo...@redhat.com] 
Sent: Monday, November 03, 2014 12:06 PM
To: Dinuwan
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Certificate Enrollment Failed

it means that /etc/pki/ovirt-engine/serial.txt is either empty or missing, 
should not happen if ca is set up.

- Original Message -
> From: "Dinuwan" 
> To: users@ovirt.org
> Sent: Monday, November 3, 2014 9:55:30 AM
> Subject: [ovirt-users] Certificate Enrollment Failed
> 
> 
> 
> Hello Everyone!
> 
> 
> 
> I am trying to re-install a host in an ovirt hosted-engine environment 
> but the second host keeps on failing with the Certificate Enrollment 
> failed error.
> 
> 
> 
> I have deleted the Host from the Engine but it always fails at the 
> certificate enrollment.
> 
> 
> 
> The following problem is similar to mine but I have checked my file 
> permissions and they are all as they should:
> 
> 
> 
> http://lists.ovirt.org/pipermail/users/2014-May/024738.html
> 
> 
> 
> engine.log :
> 
> 
> 
> 2014-11-03 11:22:38,485 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (VdsDeploy) Correlation ID: 2f0410ee, Call Stack: null, Custom Event 
> ID: -1$
> 
> 2014-11-03 11:22:39,496 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) 
> Sign Certificate request failed with exit code 1
> 
> 2014-11-03 11:22:39,497 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) 
> Sign Certificate request script errors:
> 
> Using configuration from openssl.conf
> 
> unable to load number from serial.txt
> 
> error while loading serial number
> 
> 139842728826696:error:0D066096:asn1 encoding 
> routines:a2i_ASN1_INTEGER:short
> line:f_int.c:215:
> 
> Cannot sign certificate
> 
> 
> 
> 2014-11-03 11:22:39,499 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException:
> Certificate enrollment failed
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,510 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 
> 10.10.10.2
> install: java.lang.RuntimeExc$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,516 ERROR 
> [org.ovirt.engine.core.bll.InstallerMessages]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Installation 10.10.10.2:
> Certificate enrollment fa$
> 
> 2014-11-03 11:22:39,546 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Correlation ID: 
> 2f0410ee, Cal$
> 
> 2014-11-03 11:22:39,548 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 
> 10.10.10.2 install, prefering first exce$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 
> 
> I’ve been struggling with this problem for about a week now, and I 
> have tried changing HostIDs and re-installing 
> ovirt-hosted-engine-setup but it still appears. The only thing I 
> couldn’t try is to re-install the machine. The problem with that is I 
> have my gluster bricks running on the same therefore it is the last option I 
> want to consider.
> 
> 
> 
> Hopefully somebody will be able to assist me with this.
> 
> 
> 
> Thanks in advance.
> 
> 
> Dinu.
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 

Re: [ovirt-users] Certificate Enrollment Failed

[Yedidyah Bar David]

- Original Message -
> From: "Dinuwan" 
> To: "Alon Bar-Lev" 
> Cc: users@ovirt.org
> Sent: Monday, November 3, 2014 11:05:39 AM
> Subject: Re: [ovirt-users] Certificate Enrollment Failed
> 
> Hi Alon,
> 
> Thank you for your reply.
> 
> I just checked the serial.txt file and indeed it is empty. How do you think I
> should proceed with it?

If that's your only problem, you can simply write there a number larger than
the largest one issued so far, as can be seen by 'ls -l 
/etc/pki/ovirt-engine/certs'.
E.g. if the largest there is '1007.pem', you can 'echo 1008 > 
/etc/pki/ovirt-engine/serial.txt'.

However, this file should not be empty normally at this point. You might
better check what caused it to be empty and what other damage this caused.
E.g. check your logs etc for the timestamp(s) of this file.
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Certificate Enrollment Failed

[Dinuwan]

Hi Alon, 

Thank you for your reply. 

I just checked the serial.txt file and indeed it is empty. How do you think I 
should proceed with it?

Regards,

Dinu. 

-Original Message-
From: Alon Bar-Lev [mailto:alo...@redhat.com] 
Sent: Monday, November 03, 2014 12:06 PM
To: Dinuwan
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Certificate Enrollment Failed

it means that /etc/pki/ovirt-engine/serial.txt is either empty or missing, 
should not happen if ca is set up.

- Original Message -
> From: "Dinuwan" 
> To: users@ovirt.org
> Sent: Monday, November 3, 2014 9:55:30 AM
> Subject: [ovirt-users] Certificate Enrollment Failed
> 
> 
> 
> Hello Everyone!
> 
> 
> 
> I am trying to re-install a host in an ovirt hosted-engine environment 
> but the second host keeps on failing with the Certificate Enrollment 
> failed error.
> 
> 
> 
> I have deleted the Host from the Engine but it always fails at the 
> certificate enrollment.
> 
> 
> 
> The following problem is similar to mine but I have checked my file 
> permissions and they are all as they should:
> 
> 
> 
> http://lists.ovirt.org/pipermail/users/2014-May/024738.html
> 
> 
> 
> engine.log :
> 
> 
> 
> 2014-11-03 11:22:38,485 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (VdsDeploy) Correlation ID: 2f0410ee, Call Stack: null, Custom Event 
> ID: -1$
> 
> 2014-11-03 11:22:39,496 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) 
> Sign Certificate request failed with exit code 1
> 
> 2014-11-03 11:22:39,497 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) 
> Sign Certificate request script errors:
> 
> Using configuration from openssl.conf
> 
> unable to load number from serial.txt
> 
> error while loading serial number
> 
> 139842728826696:error:0D066096:asn1 encoding 
> routines:a2i_ASN1_INTEGER:short
> line:f_int.c:215:
> 
> Cannot sign certificate
> 
> 
> 
> 2014-11-03 11:22:39,499 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException:
> Certificate enrollment failed
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,510 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 
> 10.10.10.2
> install: java.lang.RuntimeExc$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,516 ERROR 
> [org.ovirt.engine.core.bll.InstallerMessages]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Installation 10.10.10.2:
> Certificate enrollment fa$
> 
> 2014-11-03 11:22:39,546 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Correlation ID: 
> 2f0410ee, Cal$
> 
> 2014-11-03 11:22:39,548 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 
> 10.10.10.2 install, prefering first exce$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertifica
> teRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) 
> [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 
> 
> I’ve been struggling with this problem for about a week now, and I 
> have tried changing HostIDs and re-installing 
> ovirt-hosted-engine-setup but it still appears. The only thing I 
> couldn’t try is to re-install the machine. The problem with that is I 
> have my gluster bricks running on the same therefore it is the last option I 
> want to consider.
> 
> 
> 
> Hopefully somebody will be able to assist me with this.
> 
> 
> 
> Thanks in advance.
> 
> 
> Dinu.
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman

Re: [ovirt-users] Add multiple files to a VM via cloud-init

[Juan Hernandez]

On 11/02/2014 03:37 PM, Amedeo Salvati wrote:
> Hi Juan,
> 
> this means that example of python code on 
> http://www.ovirt.org/Features/Cloud-Init_Integration that I wrote some 
> months ago against v3.4 could be changed by encoding the content on base64?
> 
> at this time of this writing I haven't v3.5 to test the script / new code
> 
> best regards
> Amedeo Salvati
> 

Using base64 to encode the content of files is just an option offered by
cloud-init. You can use it or not, both alternatives should work fine. I
think that using base64 is slightly better, because you can use it for
binary or text files, and it is easier to paste into the cloud-init file.

> Il 01/11/2014 00:00, users-requ...@ovirt.org ha scritto:
>> The "custom_script" element doesn't work in combination with cloud-init
>> and run once. To make it work you have to use cloud-init and a file
>> element containing your custom script. Here you have an example:
>>
>> #!/usr/bin/python
>>
>> import base64
>> import re
>>
>> from ovirtsdk.api import API
>> from ovirtsdk.xml import params
>>
>> # A simple function to encode using base64 and now new lines:
>> def encode(s):
>> return re.sub("\s+", "", base64.encodestring(s))
>>
>> # Connect to the server:
>> api = API(
>>url="https://engine35.example.com/ovirt-engine/api";,
>>username="admin@internal",
>>password="redhat123",
>>insecure=True,
>>debug=True
>> )
>>
>> # Find the virtual machine:
>> myvm = api.vms.get(name="myvm")
>>
>> # Prepare the cloud-init custom script to write files:
>> myscript = """\
>> write_files:
>> """
>>
>> # Append one file:
>> myscript += """\
>> - encoding: b64
>>content: %s
>>owner: root:root
>>path: /etc/firstfile.txt
>>permissions: '0644'
>> """ % encode("The content of the first file")
>>
>> # Append another file:
>> myscript += """\
>> - encoding: b64
>>content: %s
>>owner: root:root
>>path: /etc/secondfile.txt
>>permissions: '0644'
>> """ % encode("The content of the second file")
>>
>> # Prepare the action to trigger initialization using cloud-init:
>> action = params.Action(
>>vm=params.VM(
>>  initialization=params.Initialization(
>>cloud_init=params.CloudInit(
>>  files=params.Files(
>>file=[
>>  params.File(
>>name="myscript",
>>type_="plaintext",
>>content=myscript
>>  )
>>]
>>  )
>>)
>>  )
>>)
>> )
>>
>> # Start the virtual machine:
>> myvm.start(action)
>>
>> # Disconnect from the server:
>> api.disconnect()
>>
>> Regarding the problem with the root password we have a bug in 3.5 that
>> makes this fail. See here:
>>
>>https://bugzilla.redhat.com/1156155
>>
>> The problem is that we are not passing the user name to cloud-init, and
>> as a result it is changing the default cloud-init user password, not the
>> root pssword. To workaround the issue you can edit the
>> "/etc/cloud/cloud.cfg" file of the VM and change the default user name:
>>
>>system_info:
>>distro: ...
>>default_user:
>>  name: root  <-- Change this from "fedora" or "cloud-init" to root
> 

-- 
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3ºD, 28016 Madrid, Spain
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Mask CPU model and mixed clusters

[Mario Giammarco]

Hello,
I would like to know if there are improvements regarding ovirt support of
mixed clusters (with amd and intel cpus).
I see that is a feature supported by kvm because at least pve/proxmox and
cloudstack support mixed cluster with migration and ha.

Thanks in advance for any reply!


Mario
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] gluster-server 3.5.2 requies gluasterfs-3.52

[Sahina Bose]

On 11/03/2014 01:44 PM, Sahina Bose wrote:
ovirt 3.5 does not have a dependency on glusterfs-3.6.0, AFAIK. 3.6 is 
in beta stage still.


My bad. glusterfs 3.6 was released on Oct 31.



Are you installing hosted engine? Do you by any chance have additional 
repos for glusterfs configured?


On 11/03/2014 05:44 AM, Juan Carlos YJ. Lin wrote:
gluster-server 3.5.2 requies gluasterfs-3.52, but ovirt3.5 install 
glusterfs-3.6.0

how to solve the dependency?

Juan Carlos Lin
Unisoft S.A.
+595-993-288330


System-wide Disclaimer 
---

"Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente"
"Aviso: Este mensaje es dirigido para su destinatario y contiene 
informaciones que no pueden ser usadas por otras personas que no sean 
su(s) destinatario(s). La retransmisión del contenido no está 
autorizada fuera del contexto de su envío y a quien corresponde. El 
uso no autorizado de la información en este mensaje se halla penado 
por las leyes vigentes en todo el mundo. Si ha recibido este mensaje 
por error, por favor bórrala y notifique al remitente en la brevedad 
posible. El contenido de este mensaje no es responsabilidad de la 
Empresa y debe ser atribuido siempre a su autor. Gracias."



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] gluster-server 3.5.2 requies gluasterfs-3.52

[Sahina Bose]

ovirt 3.5 does not have a dependency on glusterfs-3.6.0, AFAIK. 3.6 is 
in beta stage still.


Are you installing hosted engine? Do you by any chance have additional 
repos for glusterfs configured?


On 11/03/2014 05:44 AM, Juan Carlos YJ. Lin wrote:
gluster-server 3.5.2 requies gluasterfs-3.52, but ovirt3.5 install 
glusterfs-3.6.0

how to solve the dependency?

Juan Carlos Lin
Unisoft S.A.
+595-993-288330


System-wide Disclaimer ---
"Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente"
"Aviso: Este mensaje es dirigido para su destinatario y contiene 
informaciones que no pueden ser usadas por otras personas que no sean 
su(s) destinatario(s). La retransmisión del contenido no está 
autorizada fuera del contexto de su envío y a quien corresponde. El 
uso no autorizado de la información en este mensaje se halla penado 
por las leyes vigentes en todo el mundo. Si ha recibido este mensaje 
por error, por favor bórrala y notifique al remitente en la brevedad 
posible. El contenido de este mensaje no es responsabilidad de la 
Empresa y debe ser atribuido siempre a su autor. Gracias."



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Certificate Enrollment Failed

[Alon Bar-Lev]

it means that /etc/pki/ovirt-engine/serial.txt is either empty or missing, 
should not happen if ca is set up.

- Original Message -
> From: "Dinuwan" 
> To: users@ovirt.org
> Sent: Monday, November 3, 2014 9:55:30 AM
> Subject: [ovirt-users] Certificate Enrollment Failed
> 
> 
> 
> Hello Everyone!
> 
> 
> 
> I am trying to re-install a host in an ovirt hosted-engine environment but
> the second host keeps on failing with the Certificate Enrollment failed
> error.
> 
> 
> 
> I have deleted the Host from the Engine but it always fails at the
> certificate enrollment.
> 
> 
> 
> The following problem is similar to mine but I have checked my file
> permissions and they are all as they should:
> 
> 
> 
> http://lists.ovirt.org/pipermail/users/2014-May/024738.html
> 
> 
> 
> engine.log :
> 
> 
> 
> 2014-11-03 11:22:38,485 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (VdsDeploy) Correlation ID: 2f0410ee, Call Stack: null, Custom Event ID: -1$
> 
> 2014-11-03 11:22:39,496 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign
> Certificate request failed with exit code 1
> 
> 2014-11-03 11:22:39,497 ERROR
> [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign
> Certificate request script errors:
> 
> Using configuration from openssl.conf
> 
> unable to load number from serial.txt
> 
> error while loading serial number
> 
> 139842728826696:error:0D066096:asn1 encoding routines:a2i_ASN1_INTEGER:short
> line:f_int.c:215:
> 
> Cannot sign certificate
> 
> 
> 
> 2014-11-03 11:22:39,499 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException:
> Certificate enrollment failed
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertificateRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,510 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 10.10.10.2
> install: java.lang.RuntimeExc$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertificateRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 2014-11-03 11:22:39,516 ERROR [org.ovirt.engine.core.bll.InstallerMessages]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Installation 10.10.10.2:
> Certificate enrollment fa$
> 
> 2014-11-03 11:22:39,546 ERROR
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Correlation ID: 2f0410ee, Cal$
> 
> 2014-11-03 11:22:39,548 ERROR [org.ovirt.engine.core.bll.VdsDeploy]
> (org.ovirt.thread.pool-8-thread-2) [2f0410ee] Error during host 10.10.10.2
> install, prefering first exce$
> 
> at
> org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper.signCertificateRequest(OpenSslCAWrapper.java:56)
> [utils.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy._threadMain(VdsDeploy.java:927)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy.access$2000(VdsDeploy.java:83)
> [bll.jar:]
> 
> at org.ovirt.engine.core.bll.VdsDeploy$51.run(VdsDeploy.java:969) [bll.jar:]
> 
> at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_71]
> 
> 
> 
> 
> 
> I’ve been struggling with this problem for about a week now, and I have tried
> changing HostIDs and re-installing ovirt-hosted-engine-setup but it still
> appears. The only thing I couldn’t try is to re-install the machine. The
> problem with that is I have my gluster bricks running on the same therefore
> it is the last option I want to consider.
> 
> 
> 
> Hopefully somebody will be able to assist me with this.
> 
> 
> 
> Thanks in advance.
> 
> 
> Dinu.
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users