tried localhost:gluster1?
On Tue, Nov 18, 2014 at 11:11 PM, Chris Adams wrote:
> So this may be a dumb question, but here goes...
>
> I set up a replicated Gluster volume for VM disk image storage. I
> specified the path as node9:gluster1 (where node9 is one of the two
> nodes with a brick). H
Hi,
Release criteria discussion started on 2014-10-22 and should have ended last
week as per current release process [1].
Since oVirt sync meeting wasn't held last week, it has been postponed to today
2014-11-19.
Current options are:
1) keeping the same release criteria we had for 3.5 [2]
2) re
Hi,
We're going to start composing oVirt 3.5.1 RC on *2014-11-25 08:00 UTC* from
3.5 branch.
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be
created from the same git hash used for composing the RC.
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs bef
Hi, Chao
You may make a mistake, that's not my setup :-)
But i don't think it's a problem of password. If the passwords were not
the same, it will throw an ERROR of:
[ ERROR ] Cannot automatically add the host to cluster None: HTTP Status
401
[ ERROR ] Failed to execute stage 'Closing up':
Hi, Chou
It seems your rhevm is not setup successfully. I suggest you can think
about the two possible root cause below:
1. your /etc/hosts about host/rhevm-vm is configured correctly?
2. your password set in hosted-engine –deploy and rhevm-setup is same ?
If those are
Hi,all
Recently I test the VLAN and have some problems. I configure the
Logical network “testvlan” with “VLAN tagged” and assigned it to hosts’ NIC.
Then I create a VM using “testvlan” and found the vm can’t get IP . Does
anyone have some ideas about VLAN?
p.s. I already confi
Hi, can you access Engine webadmin with this ERROR message?
2014-11-18 19:45 GMT+08:00 Sandvik Agustin :
> Hi!,
>
>
> I have install ovirt 3.4 on centos 6.6 following this documentation
> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>
> I have already completed the inst
So this may be a dumb question, but here goes...
I set up a replicated Gluster volume for VM disk image storage. I
specified the path as node9:gluster1 (where node9 is one of the two
nodes with a brick). However, when I shut down node9, the VM using that
storage automatically gets paused.
I tho
That works because you have effectively disabled ballooning for the VM,
which is not really solving the underlying problem.
regards,
John
On 18/11/14 10:02, Groten, Ryan wrote:
I also recently started getting these errors. They started when I
upgraded from 3.4.0 to 3.4.2.
The error appea
I've been looking around for any best practices/recommendations on how large a
storage domain can be but can't seem to find anything.
For example, right now I have a 3TB domain made up of 3 1TB luns. That domain
has about 200 thin disks created from it.
When I want to add more space, is there
Hi,
I think is a really good question, why does not possible sepereate storage
network traffic like display, etc?
This is not an easy task to set up, and it's more difficult on a live system.
Tibor
- Eredeti üzenet -
> On 18/11/14 06:25, Juan Pablo Lorier wrote:
> > Hi,
> >
> > In m
I'm replying to 'up' this as well as I'm most interested in this. I
actually thought this was implemented and working too.
On Mon, Nov 17, 2014 at 10:01 AM, Daniel Helgenberger <
daniel.helgenber...@m-box.de> wrote:
> Hello Joop,
>
> thanks for raising the issue as it is one of the things I assu
Hi!,
I have install ovirt 3.4 on centos 6.6 following this documentation
http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
I have already completed the installation of ovirt engine inside of the vm,
when going back to hosted-engine --deploy terminal and choosing 1 the
hoste
On 18/11/14 06:25, Juan Pablo Lorier wrote:
Hi,
In my experience, having ovirt traffic on the same nic that gluster
can make your platafrom unstable. I was using it for large file
storage and gluster has so big traffic that ovirt got confused and
started marking hosts as unavailable because o
On Mon, 2014-11-17 at 16:48 -0500, Alon Bar-Lev wrote:
>
> - Original Message -
> > From: "Cameron Christensen"
> > To: "Alon Bar-Lev"
> > Cc: users@ovirt.org
> > Sent: Monday, November 17, 2014 11:43:34 PM
> > Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to
>
Hello,
I am toying an idea involving using oVirt's PM capabilities (esp. the
cluster power_saving policy) in conjuration with some consumer grate
hosts for raw compute applications.
Now, these hosts do not have any lights out or BMC capabilities.
However, they could be started with WOL packets
Ah,
the IE 11 issue seems to be something else. We use Angular JS for the page and
the screenshot shows that the template fields weren't replaced by content.
I found couple of references to issues with Angular and IE 11. Are you able to
check if IE 10 is ok so we can isolate the issue?
--
Mart
Hi,
No it doesn't work on IE11. You can see a screenshot here:
http://picpaste.com/Optimizer_IE11-JFreSHvp.png
I managed to change the logging level to INFO (by modifying standalone.xml).
Thanks a lot!
Sokratis
> Date: Tue, 18 Nov 2014 08:29:31 -0500
> From: msi...@redhat.com
> To: sokratis1...@ou
Hi,
> I disabled the security check in Firefox and it works now. Is there a similar
> workaround for Chrome and IE?
I have no idea about Chrome, but IE used to be OK. Is the issue there as well
(meaning they finally included the security check)?
> What about the server.log file? Why does it thr
Hi,
I disabled the security check in Firefox and it works now. Is there a similar
workaround for Chrome and IE?
What about the server.log file? Why does it throw this error? How can I change
the logging level?
Thanks,
Sokratis
> Date: Tue, 18 Nov 2014 07:32:47 -0500
> From: msi...@redhat.com
Hi,
we do not support the newest versions of Firefox and other browsers yet. This
is a known issue:
http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined
that can be solved by disabling one of the browser security checks before we
implement the SSL version of the optimizer s
Hi,
I have modified standalone.xml and replaced 127.0.0.1 with the IP address of
the server and the connection to optimizer:8080 works correctly.
Using Chrome I get "Waiting for data..."
Using Firefox I get "Status: Data refresh failed: undefined"
I inspected the page and when I click on th
- Original Message -
> From: "Itamar Heim"
> To: users@ovirt.org
> Sent: Monday, November 17, 2014 8:41:32 AM
> Subject: [ovirt-users] Ubuntu/Debian support?
>
> So, a quick non-scientific poll...
>
> Motivation: It has been suggested that adding ubuntu or debian distro
> support could
Hello,
>
> Thank you for the detailed reply.
>
> Yes, the vms are used an independent network/network interfaces for access
> the internet.
> So, in this case I could separate the high glusterfs traffic from ovirt
> management traffic when I disable "vm" network on ovirtmgmt interface.
>
> I
Hi Lior,
>
>
> If I'm not mistaken, on Luf's topology, there is no switch on the
> management bond (bond0) - just a cross or regular eth cable connecting
> physical interfaces on both nodes. So when one node is powered down,
> there is no link detected on the other node.
>
>
> Regards,
>
> O
On 18-11-2014 10:25, Juan Pablo Lorier wrote:
> Hi,
>
> In my experience, having ovirt traffic on the same nic that gluster
> can make your platafrom unstable. I was using it for large file
> storage and gluster has so big traffic that ovirt got confused and
> started marking hosts as unavailable b
Hi,
In my experience, having ovirt traffic on the same nic that gluster can
make your platafrom unstable. I was using it for large file storage and
gluster has so big traffic that ovirt got confused and started marking
hosts as unavailable because of hi latency.
I've opened an RFE over a year
Hi,
Please check the browser's debug console for error messages. Then check the
firewall and jboss configuration on the Optimizer server.
The JBoss log on the optimizer machine will tell you whether it does some
computations (you will see score lines).
Then try manually connecting (telnet) to o
- Original Message -
> From: "Itamar Heim"
> To: "Yedidyah Bar David"
> Cc: users@ovirt.org
> Sent: Tuesday, November 18, 2014 10:58:08 AM
> Subject: Re: [ovirt-users] Ubuntu/Debian support?
>
> On 11/18/2014 03:54 AM, Yedidyah Bar David wrote:
> > Define "issue". iow, define what our go
On 11/18/2014 03:54 AM, Yedidyah Bar David wrote:
Define "issue". iow, define what our goal is. If it's "make it possible
to easily run ovirt on debian", that's one thing, perhaps easily achieved
by your points 4-5 below. If it's "have ovirt packaged inside the Debian
archive" that's a considerab
- Original Message -
> From: "Itamar Heim"
> To: users@ovirt.org
> Sent: Monday, November 17, 2014 9:41:32 AM
> Subject: [ovirt-users] Ubuntu/Debian support?
>
> So, a quick non-scientific poll...
>
> Motivation: It has been suggested that adding ubuntu or debian distro
> support could b
What is your web browser? In my case , if i use the Chrome then the status
would be "Waiting for data..." forever,
but when i use Firefox then everything is ok.
by the way, please make sure that you optimizer can be connected from
ovirt-engine firstly.
e.g. if you use jboss, you need to run th
Network access is working both sides and i don't see any errors in the logs.
You can see a screenshot of the tab in the below link:
http://picpaste.com/Optimizer_1-9UdHfclq.png
> Date: Mon, 17 Nov 2014 11:14:16 -0500
> From: dfedi...@redhat.com
> To: sokratis1...@outlook.com
> CC: users@ovirt.org
33 matches
Mail list logo