[ovirt-users] Update to 3.5.1 scrambled multipath.conf?
Hello, on my all-in-one installation @home I had 3.5.0 with F20. Today I updated to 3.5.1. it seems it modified /etc/multipath.conf preventing me from using my second disk at all... My system has internal ssd disk (sda) for OS and one local storage domain and another disk (sdb) with some partitions (on one of them there is also another local storage domain). At reboot I was put in emergency boot because partitions at sdb disk could not be mounted (they were busy). it took me some time to understand that the problem was due to sdb gone managed as multipath device and so busy for partitions to be mounted. Here you can find how multipath became after update and reboot https://drive.google.com/file/d/0BwoPbcrMv8mvS0FkMnNyMTdVTms/view?usp=sharing No device-mapper-multipath update in yum.log Also it seems that after changing it, it was then reverted at boot again (I don't know if the responsible was initrd/dracut or vdsmd) so in the mean time the only thing I could do was to make the file immutable with chattr +i /etc/multipath.conf and so I was able to reboot and verify that my partitions on sdb were ok and I was able to mount them (for safe I also ran an fsck against them) Update ran around 19:20 and finished at 19:34 here the log in gzip format https://drive.google.com/file/d/0BwoPbcrMv8mvWjJDTXU1YjRWOFk/view?usp=sharing Reboot was done around 21:10-21:14 Here my /var/log/messages in gzip format, where you can see latest days. https://drive.google.com/file/d/0BwoPbcrMv8mvMm1ldXljd3hZWnM/view?usp=sharing Any suggestion appreciated. Current multipath.conf (where I also commented out the getuid_callout that is not used anymore): [root@tekkaman setup]# cat /etc/multipath.conf # RHEV REVISION 1.1 blacklist { devnode "^(sda|sdb)[0-9]*" } defaults { polling_interval5 #getuid_callout "/usr/lib/udev/scsi_id --whitelisted --replace-whitespace --device=/dev/%n" no_path_retry fail user_friendly_names no flush_on_last_del yes fast_io_fail_tmo5 dev_loss_tmo30 max_fds 4096 } Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] raw partition or LV access for migrated guests
Hi, I'm new to oVirt and I'm trying to investigate the feasibility of migrating four (or more) centos 6 libvirt+qemu+kvm hosts into a new (not yet created) oVirt environment. In general, most of the guests are running off of disk images in /var/lib/libvirt/images and from what I can tell there would be a fairly straightforward migration path for these (I've read briefly about virt-v2v and it looks promising). However, we have a few DB server guests which, for performance reasons, have direct access to host partitions (NOT lv, but actual host partitions). There are also a few machines which use a mapped LV as a virtual disk. Is this supported in oVirt? Is there a migration path for these? -- Thanks, David Mansfield Cobite, INC. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VMs unknown state and ovirt node Non Responsive
Hi. I have a simillar problem like in this link: https://access.redhat.com/discussions/1326793 https://bugzilla.redhat.com/show_bug.cgi?id=1165269 Similar, becouse I worked it out with the VM uknown status, but I still have problem with host (node). It is all in one installaltion, therefore i dont have to remove host and add again (it is only one host portal and node on the same host), because there are still connected to the VMs. It is ovirt 3.4.4 release in latest updates on Centos 6.6 (Centos 6.5 Final). Can I do smoethings or can I upgrade to ovirt 3.5 release (safely without losing anything) if this helps. If anyone would like to help me remotely (for charity), I would be grateful :) -- G.Sz. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VMs unknown state and ovirt node Non Responsive
Thanks. It was resolve problem, but question,but the question is whether the problem is resolved JAVA or rather fall off ?? Regards, Grzegorz Szypa 2015-01-23 9:46 GMT+01:00 Juan Hernández : > On 01/23/2015 05:20 AM, Grzegorz Szypa wrote: > > Hi. > > > > I have a simillar problem like in this link: > > https://access.redhat.com/discussions/1326793 > > https://bugzilla.redhat.com/show_bug.cgi?id=1165269 > > > > Similar, becouse I worked it out with the VM uknown status, but I still > > have problem with host (node). It is all in one installaltion, therefore > > i dont have to remove host and add again (it is only one host portal and > > node on the same host), because there are still connected to the VMs. > > > > It is ovirt 3.4.4 release in latest updates on Centos 6.6 (Centos 6.5 > > Final). > > > > Can I do smoethings or can I upgrade to ovirt 3.5 release (safely > > without losing anything) if this helps. > > > > If anyone would like to help me remotely (for charity), I would be > > grateful :) > > > > -- > > G.Sz. > > If your problem is related to that link, then you should have tried to > downgrade the JDK, and it should have worked. To double check you can > check the > /usr/lib/jvm/java-1.7.0-openjdk-*/jre/lib/security/java.security file. > It may contain this line, at the very end: > > jdk.tls.disabledAlgorithms=SSLv3 > > That is because of the recent security problems with SSLv3. If you need > to solve your problem urgently and you are sure that you won't be > affected by those security problems then you can just comment out this > line and restart the engine. > > Remember to undo this change once you upgrade to 3.5. > > -- > Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta > 3ºD, 28016 Madrid, Spain > Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > -- G.Sz. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Host remains Non-Responsive after reboot
I am running oVirt Engine Version 3.5.0.1-1.el6. I have 4 hosts in the cluster. Each host has a drac5 and it is configured and working. I am trying to simulate a node failure. I am running one HA VM on one of the hosts for testing. I simulate the failure by powering off the host with the VM running. Here is what is happening. * Host is powered off * ~4 minutes pass and the host is recognized as not responding * Automatic fence runs and the VM migrates.Another host in the node is chosen as a proxy to execute Status command on the host. * Same host is chosen as proxy to execute Start command on the host. * Same host is chosen as proxy to execute Status command on the host. * The host DOES physically start. * The host never shows status of UP. * I select “confirm host has been rebooted” and I see a manual fence start. * Host stays non-responsive. * I put the host in maintenance and then activate it. * Host still non-responsive * I put the host in maintenance and do a reinstall * Reinstall finishes and host becomes UP So, everything seems to go fine with the HA functionality, but the host never recovers without being reinstalled. Please let me know which logs you need to look at to help me out with this. Thanks Sent withMixmax [https://mixmax.com/r/S6cJAfQTLnw8QGtnD]___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt 3.5 self-hosted engine and ovirtmgmt not syncronised
Donny Davis писал 2015-01-23 18:07: You have to move the hosted engine to another host to sync the networks, they cannot be synced while the host is running vm's. Bring your second hosted engine machine online so the engine can be migrated, and the host in which you want to sync the network can be synced. I only know from experience, and one of the ovirt devs may have a better solution. This is what worked for me. Hmmm... I was able to sync ovirtmgmt network on two hosts out of three but now I have a problem starting engine up on those two nodes Jan 23 20:23:23 ovirt-3 vdsm vm.Vm ERROR vmId=`e3c64c89-65e0-4936-83af-de201130e789`::The vm start process failed#012Traceback (most recent call last):#012 File "/usr/share/vdsm/virt/vm.py", line 2264, in _startUnderlyingVm#012 self._run()#012 File "/usr/share/vdsm/virt/vm.py", line 3328, in _run#012self._connection.createXML(domxml, flags),#012 File "/usr/lib/python2.6/site-packages/vdsm/libvirtconnection.py", line 111, in wrapper#012ret = f(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/libvirt.py", line 2709, in createXML#012if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self)#012libvirtError: Cannot get interface MTU on 'ovirtmgmt': No such device as I mentioned earlier file /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt gets removed from those two nodes after syncing. How can I recreated that ifcfg-ovirtmgmt file? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt 3.5 self-hosted engine and ovirtmgmt not syncronised
You have to move the hosted engine to another host to sync the networks, they cannot be synced while the host is running vm's. Bring your second hosted engine machine online so the engine can be migrated, and the host in which you want to sync the network can be synced. I only know from experience, and one of the ovirt devs may have a better solution. This is what worked for me. Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Kostyrev Aleksandr Sent: Friday, January 23, 2015 4:00 AM To: users@ovirt.org Subject: [ovirt-users] ovirt 3.5 self-hosted engine and ovirtmgmt not syncronised Hello! I'm testing ovirt-3.5 with self-hosted engine. Today I've noticed that in "Setup Host Networks" screen of every host I have ovirtmgmt "Not syncronised". If I click "Save network" no errors occur but when I issue "ifconfig" on that node I see no ovirtmgmt interface - it gets removed. but virsh -r net-list Name State Autostart Persistent -- ;vdsmdummy; active nono vdsm-ovirtmgmt active yes yes vdsm-VMs active yes yes -- С уважением, Костырев Александр, системный администратор, www.tutu.ru skype a.kostyrev Тел. +7(925) 237-7668 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Details of the host
On 22/01/15 19:31, Donny Davis wrote: > But if you just need the mac address, why not ssh into it and get it from ip > addr if you can ssh, there is no need to parse "ip" output, just do cat: cat /sys/class/net/$yourdevice/address I don't think there is a way to get data from a host via api which is not activated, but I might be wrong. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt 3.5 self-hosted engine and ovirtmgmt not syncronised
Hello! I'm testing ovirt-3.5 with self-hosted engine. Today I've noticed that in "Setup Host Networks" screen of every host I have ovirtmgmt "Not syncronised". If I click "Save network" no errors occur but when I issue "ifconfig" on that node I see no ovirtmgmt interface - it gets removed. but virsh -r net-list Name State Autostart Persistent -- ;vdsmdummy; active nono vdsm-ovirtmgmt active yes yes vdsm-VMs active yes yes -- С уважением, Костырев Александр, системный администратор, www.tutu.ru skype a.kostyrev Тел. +7(925) 237-7668 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5.1 ; No Network Access on hosted engine vm
- Original Message - > From: "Mikola Rose" > To: users@ovirt.org > Sent: Friday, January 23, 2015 1:15:56 AM > Subject: [ovirt-users] oVirt 3.5.1 ; No Network Access on hosted engine vm > > Hi again > > > I think I may have selected the wrong interface during the hosted-engine > deploy routine. My VM doe not have network access. The interface is > connected and setup within the VM just no network access. > > Is there a way I can change the bridge interface? Hi Mikola, if you was able to complete hosted engine deploy and so the engine is up and the host is already managed by the engine you could simply access somehow the engine web admin UI (if you was able to complete the deploy at least the host is able to connect to the engine REST APIs) and you cold simply setup host network from there changing the bindings of ovirtmgmt logical network to the other physical interface. If your deploy is still pending and cannot complete due to wrong network configuration I'd suggest to cleanup and restart from scratch cause it would be easier and safer. For a safe cleanup please see [1] [1] - http://lists.ovirt.org/pipermail/users/2015-January/030356.html > Mik > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Upgrade to 3.5.1
Hi, No, I have only one replica beetwen two nodes. The third node is only a host for vms and that using this replica. Thanks Tibor - Eredeti üzenet - > On 01/22/2015 08:03 PM, Demeter Tibor wrote: > > Hello, > > > I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs for > > serving backend storage for VM-s. Glusterfs are on same servers with ovirt. > > > We have Gluster 3.5.1 on all of nodes. > > > How can I upgrade to ovirt 3.5.1 with new glusterfs? I don't want data > > inconsistency/data loss/split brains? > > Do you have a replica 3 volume setup across these 3 nodes? > Glusterfs supports rolling upgrade for replica volumes. > But there are some issues to upgrade from 3.5 to 3.6 versions (depending on > version used) > Adding gluster-users & Pranith for recommended procedures. > thanks > sahina > > Need I update gluster version to the latest? > > > How I need to upgrade the nodes ? Is there any whitepaper about this? > > > Thanks in advance, > > > Tibor > > > ___ > > > Users mailing list Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VMs unknown state and ovirt node Non Responsive
On 01/23/2015 05:20 AM, Grzegorz Szypa wrote: > Hi. > > I have a simillar problem like in this link: > https://access.redhat.com/discussions/1326793 > https://bugzilla.redhat.com/show_bug.cgi?id=1165269 > > Similar, becouse I worked it out with the VM uknown status, but I still > have problem with host (node). It is all in one installaltion, therefore > i dont have to remove host and add again (it is only one host portal and > node on the same host), because there are still connected to the VMs. > > It is ovirt 3.4.4 release in latest updates on Centos 6.6 (Centos 6.5 > Final). > > Can I do smoethings or can I upgrade to ovirt 3.5 release (safely > without losing anything) if this helps. > > If anyone would like to help me remotely (for charity), I would be > grateful :) > > -- > G.Sz. If your problem is related to that link, then you should have tried to downgrade the JDK, and it should have worked. To double check you can check the /usr/lib/jvm/java-1.7.0-openjdk-*/jre/lib/security/java.security file. It may contain this line, at the very end: jdk.tls.disabledAlgorithms=SSLv3 That is because of the recent security problems with SSLv3. If you need to solve your problem urgently and you are sure that you won't be affected by those security problems then you can just comment out this line and restart the engine. Remember to undo this change once you upgrade to 3.5. -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Details of the host
On 01/21/2015 02:27 PM, ChandraShekar Shastri wrote: > Hi All, > > I want to get the details of the Host without activating is there a way > to do it. > I want to query the RHEV-Manager and would like to get the details of > MAC address without activating it. > > Do you have the script to do this. > > Thanks, > Chandrashekar > Assuming that the host has already been added to the system then you can get the details with a Python script like this: #!/usr/bin/python from ovirtsdk.api import API from ovirtsdk.xml import params api = API( url='https://ovirt.example.com/ovirt-engine/api', username='admin@internal', password='**', insecure=True ) host = api.hosts.get(name="myhost") nics = host.nics.list() for nic in nics: print("%s: %s" % (nic.get_name(), nic.get_mac().get_address())) api.disconnect() This will print something like this: eth0: 52:54:00:9d:a7:26 If the host hasn't been added you can add it, without activating it: #!/usr/bin/python from ovirtsdk.api import API from ovirtsdk.xml import params api = API( url='https://rhevm35.example.com/ovirt-engine/api', username='admin@internal', password='**', insecure=True, ) api.hosts.add( host = params.Host( name="myhost", address="myhost.example.com", root_password="**" ) ) api.disconnect() -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users