Jorick,
just what comes to my mind: do you have NetworkManager running, by any
chance? VDSM and NetworkManager don't mix well currently so please try
# systemctl stop NetworkManager
# systemctl disable NetworkManager
Regards,
Ondra Svoboda
On 27.1.2015 14:10, Jorick Astrego wrote:
On
On 27/01/15 14:20, Ondřej Svoboda wrote:
just what comes to my mind: do you have NetworkManager running, by any
chance? VDSM and NetworkManager don't mix well currently so please try
Doesn't vdsm / ovirt take care of that during installation?
on EL7 NetworkManager is active by default!
--
Ah yes, I forgot to disable it as I switched to foreman provisioning.
Maybe it can be auto detected and disabled in the install host scripts
when ovirt installs vdsm and sets up the networking. For people who
forget to disable it.
But now I get this:
sourceRoute::DEBUG::2015-01-27
Except you can’t change the network MTU setting in the first place on the
network in the GUI. I’ve thought about doing it in the database, with a
migration as you mention. Just checking first for better options :)
On Jan 27, 2015, at 12:08 PM, Donny Davis do...@cloudspin.me wrote:
Migrate
Looking at the logs I can see that connection was lost at 2015-01-26
09:24:43,213
and I can see good number of reconnection attempts which end up with
timeout or 'no route to host'.
The connection was recovered at 2015-01-26 09:28:56,292.
Vdsm.log do not contain above connection loss (it starts
Maybe I missed your question, but I can change the MTU from the gui without any
problems. As long as you make sure there are not any vm's on the host you are
trying to sync, I have experienced no issues.
Donny
-Original Message-
From: Darrell Budic [mailto:bu...@onholyground.com]
Yeah. There would have been a lot of connection issues because I was doing
a lot of testing and reconfiguring.The only part that's really
applicable for this issue is the period you mentioned from 11:54 to 12:01.
I did use the service vdsm status command after the host came back up and
the
From the first log (journal): VDSM managed to start, only it is being
run too early (it should be waiting patiently for its supervdsm
component to start responding).
Are there no RTNETLINK answers: File exists errors anymore?
Second log: This is normal operation.
So the host stopped
I can see in the log that VDSM tried to obtain information about bond1
and (bridge) Internet, both of which did not exist (yet?) in a
procedure which reports the information back to oVirt. But this just
means that no information about them was reported, it shows no real error.
There was no
I have an up-to-date hosted-engine 3.5.1 setup (CentOS 7 for the nodes,
CentOS 6 for the engine), and the engine keeps jumping between the two
nodes running the hosted-engine HA (sometimes after just 10-20 minutes,
sometimes after a day or two). I figured out that it is failing on
pinging the
- Original Message -
From: Gianluca Cecchi gianluca.cec...@gmail.com
To: Nir Soffer nsof...@redhat.com
Cc: Dan Kenigsberg dan...@redhat.com, users users@ovirt.org, Yeela
Kaplan ykap...@redhat.com, Benjamin
Marzinski bmarz...@redhat.com
Sent: Monday, January 26, 2015 8:46:52 PM
On 23/01/15 19:41, Kostyrev Aleksandr wrote:
Donny Davis писал 2015-01-23 18:07:
You have to move the hosted engine to another host to sync the
networks, they cannot be synced while the host is running vm's. Bring
your second hosted engine machine online so the engine can be
migrated, and
Hi Mathew,
It seems like this is quite old version (September 2014). There were good
number of fixes in this area.
Looking at provided logs I am not able to tell which call is exactly failing.
Do you have any steps to reproduce?
Thanks,
Piotr
- Original Message -
From: Renchu Mathew
Hi guys,
I'm trying to run one of my storage domains, which experienced failure.
Unfortunately, I meet a very nasty error (Storage domain does not exist).
Could someone tell me, how to try to restore this domain?
P.S.
It's an oVirt 3.4.2-1.el6
**
Hi Piotr,
Can you please provide me the link to download the new node iso? I can see only
ovirt live iso.
Regards
Renchu Mathew
-Original Message-
From: Piotr Kliczewski [mailto:pklic...@redhat.com]
Sent: Tuesday, January 27, 2015 12:21 PM
To: Renchu Mathew
Cc: Piotr Kliczewski;
- Original Message -
From: Renchu Mathew ren...@cracknell.com
To: Piotr Kliczewski pklic...@redhat.com
Cc: Piotr Kliczewski piotr.kliczew...@gmail.com, Eli Mesika
emes...@redhat.com, users@ovirt.org
Sent: Tuesday, January 27, 2015 10:48:12 AM
Subject: RE: [ovirt-users] Power
On 26/01/15 15:45, Dan Kenigsberg wrote:
On Mon, Dec 22, 2014 at 01:40:06PM +0200, Lior Vernia wrote:
Hello users and developers,
Just put up a feature page for the aforementioned feature; in summary,
to report total RX/TX statistics for hosts and VMs in oVirt. This has
been requested
I'm on the same.. And I see the issue. Why don't you create a new network with
the correct parameters and then move the network the VM is attached to
On Jan 27, 2015 1:39 PM, Darrell Budic bu...@onholyground.com wrote:
Try changing that custom MTU and hitting OK. I get:
on 3.5 and 3.5.1.
Hi,
My VM doesn' t want to start because the vdsm host says it's over 45
characters or so.
This is set:
# engine-config -g MaxVmNameLengthNonWindows
MaxVmNameLengthNonWindows: 64 version: general
But when I set it to 80 it also doesn't start.
What goes wrong here ?
It's a Linux VM.
Thanks,
Hi All,
I need your help. Anyone who encounter the below error and have the
solution? Can you help me how to fix this?
MainThread::INFO::2015-01-27
10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent
MainThread::ERROR::2015-01-27
Try changing that custom MTU and hitting OK. I get:
on 3.5 and 3.5.1. What version are you running?
On Jan 27, 2015, at 2:04 PM, Donny Davis do...@cloudspin.me wrote:
Maybe I missed your question, but I can change the MTU from the gui without
any problems. As long as you make sure there
Please let us know how it works out, it may be helpful to someone in the future
Cheers
Donny DOn Jan 27, 2015 2:45 PM, Darrell Budic bu...@onholyground.com wrote:
Ah, good idea. That will be cleaner than the hack I was considering, I’ll see
if I can work that somehow. Thanks!
On Jan 27,
Ah, good idea. That will be cleaner than the hack I was considering, I’ll see
if I can work that somehow. Thanks!
On Jan 27, 2015, at 2:59 PM, Donny Davis do...@cloudspin.me wrote:
I'm on the same.. And I see the issue. Why don't you create a new network
with the correct parameters and
in addition, my host systeme is CentOS7 and ovirt version is 3.5.1
2015-01-27 14:50 GMT+08:00 Xiaoqiang Zhou zhouxiaoqiang.mst...@gmail.com:
Hi ALL:
have some wrong when add data domain into a data center.
I can not add a data domain from web panel.
error log on vdsm
Hi ALL:
have some wrong when add data domain into a data center.
I can not add a data domain from web panel.
error log on vdsm server:
Jan 27 14:49:12 localhost rpc.mountd[3020]: authenticated mount
request from 192.168.60.38:730 for /opt/ovirt-node-nfs/data
Hello,
i have create a new install of ovirt 3.51 on el7 with iscsi. All works fine but
i get every hour a message : Failed to create OVF store disk for Storage Domain.
any ideas
greetings
Wolfgang Bucher
___
Users mailing list
Wolfgang - can you attach the exact message please? and preferably the logs?
Liron/Gilad - isn't this something we've fixed already?
- Original Message -
From: Wolfgang Bucher wolfgang.buc...@netland-mn.de
To: users@ovirt.org
Sent: Tuesday, January 27, 2015 10:23:46 PM
Subject:
Hi there,
I seem to have run into a problem. my hosted engine vm is failing to start;
vdsm.log;
Thread-20::DEBUG::2015-01-27
16:53:37,999::fileSD::152::Storage.StorageDomain::(__init__) Reading domain in
path
On 01/27/2015 01:56 PM, Koen Vanoppen wrote:
Hello everybody,
Just wanted to know if anybody else has the problem, that when you
restart your network configuration of a hypervisor, all the settings
concerning the bonding are gone...
Do I file a bug report for this or is this already a known
This is weird, like there were multiple dhclients on the bond. Can you
stop VDSM (systemctl stop vdsmd supervdsmd) and maybe `killall -SIGKILL
dhclient` and restart VDSM afterwards?
On 27.1.2015 14:43, Jorick Astrego wrote:
Ah yes, I forgot to disable it as I switched to foreman provisioning.
Migrate the vms between hosts, and when a host gets to no running VMS you can
sync that network.
Donny D
cloudspin.meOn Jan 27, 2015 10:43 AM, Darrell Budic bu...@onholyground.com
wrote:
I finally got a couple of networks our from behind a wan based layer 2 bridge
that required me to run
On 27.1.2015 19:10, Ondřej Svoboda wrote:
From the first log (journal): VDSM managed to start, only it is being
run too early (it should be waiting patiently for its supervdsm
component to start responding).
Are there no RTNETLINK answers: File exists errors anymore?
Second log: This is
I was planning on making a Gluster Data domain to test, and found some great
information on this page:
http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/
The article the author uses the CTDB service for VIP failover. Is it
possible/recommended to not do this, and just create a
Found the cause of this issue...
the __DIRECT_IO_TEST__ on the mount was inaccessible due to permisions.
removed the file and it was recreated
On Jan 27, 2015, at 5:10 PM, Mikola Rose
mr...@power-soft.commailto:mr...@power-soft.com wrote:
Hi there,
I seem to have run into a problem. my
- Original Message -
From: Eli Mesika emes...@redhat.com
To: Piotr Kliczewski pklic...@redhat.com
Cc: Artyom Lukianov aluki...@redhat.com, users@ovirt.org,
rabsh...@citytwist.net, ILanit Stein
ist...@redhat.com
Sent: Tuesday, January 27, 2015 4:39:26 PM
Subject: Re:
Hi,
We are currently testing a setup with dedicated gluster servers and
dedicated compute nodes without disks.
For both we provision some custom os install and configuration.
Currently I am only able to manage and view gluster volumes from ovirt
when the Enable Gluster Service is enabled for the
Hello everybody,
Just wanted to know if anybody else has the problem, that when you restart
your network configuration of a hypervisor, all the settings concerning the
bonding are gone...
Do I file a bug report for this or is this already a known issue?
Kind regards,
Koen
Solved...
2015-01-21 13:46 GMT+01:00 Koen Vanoppen vanoppen.k...@gmail.com:
Ok, after rebooting all the hypervisors I'm left with the following errors:
Thread-16::ERROR::2015-01-21
13:39:42,644::sdc::137::Storage.StorageDomainCache::(_findDomain) looking
for unfetched domain
On 01/27/2015 01:56 PM, Koen Vanoppen wrote:
Hello everybody,
Just wanted to know if anybody else has the problem, that when you
restart your network configuration of a hypervisor, all the settings
concerning the bonding are gone...
Do I file a bug report for this or is this already a known
On 27/01/15 13:56, Jorick Astrego wrote:
For both we provision some custom os install and configuration.
Currently I am only able to manage and view gluster volumes from ovirt
when the Enable Gluster Service is enabled for the Cluster. Right?
AFAIK correct.
There is a Enable Virt Service
Hello Koen,
please share parts of your /var/log/vdsm/vdsm.log and
/var/log/vdsm/supervdsm.log and maybe also `journalctl` output that do
not pose any security risk to you.
Regards,
Ondra
On 27.1.2015 13:56, Koen Vanoppen wrote:
Hello everybody,
Just wanted to know if anybody else has the
Done, maybe this helps:
Jan 27 16:20:26 test2 vdsmd_init_common.sh: vdsm: Running
unified_network_persistence_upgrade
Jan 27 16:20:26 test2 vdsmd_init_common.sh: vdsm: Running restore_nets
Jan 27 16:21:47 test2 systemd-logind: New session 5 of user root.
Jan 27 16:21:47 test2
- Original Message -
From: ILanit Stein ist...@redhat.com
To: Artyom Lukianov aluki...@redhat.com, Eli Mesika emes...@redhat.com
Cc: users@ovirt.org, rabsh...@citytwist.net
Sent: Tuesday, January 27, 2015 5:19:12 PM
Subject: Fwd: [ovirt-users] Host remains Non-Responsive after
Hey Tim,
yum update ovirt-engine-setup*
engine-setup
That's enough for the engine upgrade :) Works like a charm.
On Tue, Jan 27, 2015 at 5:35 PM, Tim Macy mac...@gmail.com wrote:
What are the proper steps to upgrade the engine from 3.5.0.1-1.el6 to
3.5.1-1.el6?
engine-upgrade or
What are the proper steps to upgrade the engine from 3.5.0.1-1.el6 to
3.5.1-1.el6?
engine-upgrade or engine-setup after yum update ovirt-engine-setup?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I finally got a couple of networks our from behind a wan based layer 2 bridge
that required me to run at MTU 1448, and would like to get back up to MTU 1500.
I see the GUI won’t let me do that while the network is in use. Any way around
this, clean or otherwise? Restarting VMs to update them is
On 01/27/2015 06:47 PM, Sven Kieske wrote:
On 27/01/15 13:56, Jorick Astrego wrote:
For both we provision some custom os install and configuration.
Currently I am only able to manage and view gluster volumes from ovirt
when the Enable Gluster Service is enabled for the Cluster. Right?
AFAIK
47 matches
Mail list logo
