Re: [ovirt-users] Help understanding Gluster in oVirt
Nope in fact I followed the guide and found CTDB works quite well. I am just trying to figure out the benefit because that would be another component to consider in the architecture. From: Sahina Bose [mailto:sab...@redhat.com] Sent: Tuesday, February 03, 2015 4:09 AM To: Groten, Ryan; users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt On 01/28/2015 08:59 AM, Groten, Ryan wrote: I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? Theoretically, it should work - if you make sure that you have a replica 3 gluster volume spread across 3 nodes, and these 3 nodes are your compute nodes as well - you should be fine without CTDB setup for failover and mounting as localhost. But I've not tried this to recommend it. Maybe if others have tried it, they can chime in? Btw, is there any reason you do not want to set up CTDB? Thanks, Ryan ThTh ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance)
Hi, I’m very impressed with oVirt, but I have one small problem. When I’d the installation of hosted-engine I only had one NIC configured, now I want to activate the other NIC (eno2), but according to the install instructions I disabled the NetworkManager, and now I do not know how to activate the second NIC. Do I have to reinstall everything and activate the two NICs during OS install, or can I do it in another way? Regards, Staffan Öhrberg 26 jan 2015 kl. 17:37 skrev Staffan Öhrberg sohrb...@gmail.com: Hi, Just want you to know that I managed to get it to work. I did the same installation, but using an external NAS instead of GlusterFS. Regards, Staffan Öhrberg 7 jan 2015 kl. 09:06 skrev Oved Ourfali ov...@redhat.com: Hi Was the installation of the engine successful? It is a bit weird that it doesn't find this class, so perhaps it is some packaging issue? Can you attach the complete engine.log and server.log? What's the operating system of your engine server? Thanks, Oved - Original Message - From: Staffan Öhrberg sohrb...@gmail.com To: users@ovirt.org Sent: Monday, January 5, 2015 6:03:46 PM Subject: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance) Hi, Short background, I own a startup company that have been used VMware ESXi for a year and are trying oVirt to see if that can be a replacement for us. I have just installed oVirt 3.5, but have trouble accessing ovirt-image-repository,Glance ( http://glance.ovirt.org:9292 ). In the admin console it just says: ”Error while executing action: A Request to the server failed with the following Status Code: 500” In the server.log I got a lot of errors: 2015-01-05 16:57:01,881 ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[default-host].[/ovirt-engine/webadmin]] (ajp--127.0.0.1-8702-7) Exception while dispatching incoming RPC call: com.google.gwt.user.server.rpc.UnexpectedException: Service method 'public abstract org.ovirt.engine.core.common.action.VdcReturnValueBase org.ovirt.engine.ui.frontend.gwtservices.GenericApiGWTService.runAction(org.ovirt.engine.core.common.action.VdcActionType,org.ovirt.engine.core.common.action.VdcActionParametersBase)' threw an unexpected exception: javax.ejb.EJBException: java.lang.RuntimeException: java.lang.NoClassDefFoundError: Could not initialize class com.woorea.openstack.glance.Glance …. I have search for an answer, but have not found one. Anyone in this forum have any idea of whats wrong? Regards, Staffan Öhrberg ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing
- Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Wednesday, February 4, 2015 6:06:03 PM Subject: [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing Hi, I've been asked to start the discussion about testing 3.6.0 nightly builds. Once http://gerrit.ovirt.org/37384 will be merged or manually applied on the testing host, 3.6 cluster compatibility will be enabled on the following distributions: Fedora 21: no special instructions for this distribution, should work out of the box. Fedora 20: requires virt-preview repository. Last time I used virt-preview with Fedora 20 (last ovirt test day), *nothing* worked - live snapshot, live storage migration, vm migration, all broken! Be careful using this repo. you can find the .repo file[1] in the virt-preview home[2]. AN update to ovirt-release-master rpm will enable the repository by default, Did you test this before enabling it for everyone? it will be available probably tomorrow. RHEL / CentOS 7.1: not yet released, but once they'll be out they'll support 3.6 cluster compatibility RHEL / CentOS = 7.0 won't have 3.6 cluster compatibility. [1] https://fedorapeople.org/groups/virt/virt-preview/fedora-virt-preview.repo [2] https://fedorapeople.org/groups/virt/virt-preview/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing
On Feb 4, 2015, at 17:39 , Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Wednesday, February 4, 2015 6:06:03 PM Subject: [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing Hi, I've been asked to start the discussion about testing 3.6.0 nightly builds. Once http://gerrit.ovirt.org/37384 will be merged or manually applied on the testing host, 3.6 cluster compatibility will be enabled on the following distributions: Fedora 21: no special instructions for this distribution, should work out of the box. Fedora 20: requires virt-preview repository. Last time I used virt-preview with Fedora 20 (last ovirt test day), *nothing* worked - live snapshot, live storage migration, vm migration, all broken! that was maybe due to qemu-kvm vs qemu-kvm-rhev we now package in ovirt. That should supersede the one provided in virt-preview repo. However we better check…;-) Be careful using this repo. you can find the .repo file[1] in the virt-preview home[2]. AN update to ovirt-release-master rpm will enable the repository by default, Did you test this before enabling it for everyone? it will be available probably tomorrow. RHEL / CentOS 7.1: not yet released, but once they'll be out they'll support 3.6 cluster compatibility RHEL / CentOS = 7.0 won't have 3.6 cluster compatibility. [1] https://fedorapeople.org/groups/virt/virt-preview/fedora-virt-preview.repo [2] https://fedorapeople.org/groups/virt/virt-preview/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing
Il 04/02/2015 17:43, Michal Skrivanek ha scritto: On Feb 4, 2015, at 17:39 , Nir Soffer nsof...@redhat.com wrote: - Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Wednesday, February 4, 2015 6:06:03 PM Subject: [ovirt-devel] [QE] oVirt 3.6.0 nightly build testing Hi, I've been asked to start the discussion about testing 3.6.0 nightly builds. Once http://gerrit.ovirt.org/37384 will be merged or manually applied on the testing host, 3.6 cluster compatibility will be enabled on the following distributions: Fedora 21: no special instructions for this distribution, should work out of the box. Fedora 20: requires virt-preview repository. Last time I used virt-preview with Fedora 20 (last ovirt test day), *nothing* worked - live snapshot, live storage migration, vm migration, all broken! that was maybe due to qemu-kvm vs qemu-kvm-rhev we now package in ovirt. That should supersede the one provided in virt-preview repo. However we better check…;-) Michal, qemu-kvm-rhev is provided only for EL6 and EL7. On Fedora, qemu-kvm provided by Fedora is used. virt-preview provided by ovirt-release-master will enable libvirt only. Be careful using this repo. you can find the .repo file[1] in the virt-preview home[2]. AN update to ovirt-release-master rpm will enable the repository by default, Did you test this before enabling it for everyone? it will be available probably tomorrow. RHEL / CentOS 7.1: not yet released, but once they'll be out they'll support 3.6 cluster compatibility RHEL / CentOS = 7.0 won't have 3.6 cluster compatibility. [1] https://fedorapeople.org/groups/virt/virt-preview/fedora-virt-preview.repo [2] https://fedorapeople.org/groups/virt/virt-preview/ -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel ___ Devel mailing list de...@ovirt.org http://lists.ovirt.org/mailman/listinfo/devel -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] qcow2 as default disk format
Hi, Is it possible to set qcow2 as default format of disk image in oVirt 3.5.1? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance)
No you just need to create the network in the networks tab, then click on the newly created network and then look at the hosts tab that appears on the bottom of the screen. Click the unattached radio button and pick a host. then you can click setup host networks. drag the new network to and interface and click ok. Then you wait for the network config to be available on the host. Cheers Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Staffan Öhrberg Sent: Wednesday, February 4, 2015 10:29 AM To: Oved Ourfali Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance) Hi, I’m very impressed with oVirt, but I have one small problem. When I’d the installation of hosted-engine I only had one NIC configured, now I want to activate the other NIC (eno2), but according to the install instructions I disabled the NetworkManager, and now I do not know how to activate the second NIC. Do I have to reinstall everything and activate the two NICs during OS install, or can I do it in another way? Regards, Staffan Öhrberg 26 jan 2015 kl. 17:37 skrev Staffan Öhrberg sohrb...@gmail.com: Hi, Just want you to know that I managed to get it to work. I did the same installation, but using an external NAS instead of GlusterFS. Regards, Staffan Öhrberg 7 jan 2015 kl. 09:06 skrev Oved Ourfali ov...@redhat.com: Hi Was the installation of the engine successful? It is a bit weird that it doesn't find this class, so perhaps it is some packaging issue? Can you attach the complete engine.log and server.log? What's the operating system of your engine server? Thanks, Oved - Original Message - From: Staffan Öhrberg sohrb...@gmail.com To: users@ovirt.org Sent: Monday, January 5, 2015 6:03:46 PM Subject: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance) Hi, Short background, I own a startup company that have been used VMware ESXi for a year and are trying oVirt to see if that can be a replacement for us. I have just installed oVirt 3.5, but have trouble accessing ovirt-image-repository,Glance ( http://glance.ovirt.org:9292 ). In the admin console it just says: ”Error while executing action: A Request to the server failed with the following Status Code: 500” In the server.log I got a lot of errors: 2015-01-05 16:57:01,881 ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[default-host].[ /ovirt-engine/webadmin]] (ajp--127.0.0.1-8702-7) Exception while dispatching incoming RPC call: com.google.gwt.user.server.rpc.UnexpectedException: Service method 'public abstract org.ovirt.engine.core.common.action.VdcReturnValueBase org.ovirt.engine.ui.frontend.gwtservices.GenericApiGWTService.runAction(org.ovirt.engine.core.common.action.VdcActionType,org.ovirt.engine.core.common.action.VdcActionParametersBase)' threw an unexpected exception: javax.ejb.EJBException: java.lang.RuntimeException: java.lang.NoClassDefFoundError: Could not initialize class com.woorea.openstack.glance.Glance …. I have search for an answer, but have not found one. Anyone in this forum have any idea of whats wrong? Regards, Staffan Öhrberg ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.2 RC status
Hi, We're going to start composing oVirt 3.5.2 RC on *2015-02-25 08:00 UTC* from 3.5 branch. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2015-02-24 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2015-02-24 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. A release management entry has been added for tracking the schedule of 3.5.2 [0] A bug tracker [1] has been created and currently has no open blockers. There are still 43 bugs [2] targeted to 3.5.2. Excluding node and documentation bugs we still have 35 bugs [3] targeted to 3.5.2. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.2 should not be released without them fixed. - Please update the target to 3.5.3 or later for bugs that won't be in 3.5.2: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [0] http://www.ovirt.org/OVirt_3.5.z_Release_Management#oVirt_3.5.2 [1] http://bugzilla.redhat.com/1186161 [2] http://goo.gl/crVJPH [3] http://goo.gl/2qTZZU [4] http://www.ovirt.org/OVirt_3.5.2_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.2_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Hi, here's an update on 3.6 status on integration / rel-eng side ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [1] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 22: 2015-05-19 Fedora 20 End Of Life: 2015-06-19 (1 month after Fedora 22 release) Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 QEMU 2.3.0: 2015-03-27 The tracker bug for 3.6.0 [2] currently shows no blockers. There are 548 bugs [3] targeted to 3.6.0. Excluding node and documentation bugs we have 506 bugs [4] targeted to 3.6.0. oVirt 3.6 cluster compatibility status in nightly builds: VDSM patch introducing 3.6 compatibility[5] has not been merged yet, waiting for CentOS and RHEL 7.1 to be released for getting libvirt support. CentOS and RHEL 6.z won't have 3.6 compatibility by design [6]. Fedora 20 won't have 3.6 compatibility level since virt maintainers are going to maintain latest libvirt rpms only in latest stable Fedora release (currently Fedora 21). There's no point in providing Fedora 20 packages on oVirt side since Fedora 20 will go EOL before oVirt 3.6.0 GA. Fedora 21 will be able to support 3.6 compatibility once VDSM patch[5] will be merged. Fedora 22 may not be able to support VDSM at all since it will run Python 3 instead of Python 2 as default python interpreter[7], so more work will be needed there. [1] http://goo.gl/9X3G49 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [3] https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_release%3A3.6.0%20Product%3AoVirt%20status%3Anew%2Cassigned%2Cpost [4] http://goo.gl/ZbUiMc [5] http://gerrit.ovirt.org/37384 [6] http://lists.ovirt.org/pipermail/users/2014-September/027421.html [7] https://fedoraproject.org/wiki/Releases/22/ChangeSet -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] qcow2 as default disk format
Hello, AFAIK cow images are currently not configurable via GUI and cannot be set as default disk format. IIRC the reason being RAW and sparse are providing better performance (until you try to copy a larger disk image...). However, you can add qcow - disks with ovirt shell and use these images: $ add disk \ --vm-identifier vm_name \ --provisioned_size size_in_bytes \ --interface virtio \ --name disk_name \ --format cow \ --sparse true \ --storage_domains-storage_domain storage_domain.name=storage_domain_name On 04.02.2015 18:56, shimano wrote: Hi, Is it possible to set qcow2 as default format of disk image in oVirt 3.5.1? -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Help understanding Gluster in oVirt
I have two nodes running the hosted engine and gluster setup for replicate between them. Mounting to localhost seems to be working so far. I have live migrated the engine, pulled the plug on a running node, and rebooted each node to ensure it all works properly. I have had few issues with this setup. I didn't like ctdb because it adds another layer of complexity that is unnecessary for MY setup. Node1 gluster drive on sdb Node2 gluster drive on sdb Both replicate and are the same make and model drive. ovirt-ha running on both for hosted-engine This setup is for hosted engine only, my actual storage for VM's and what not do not run in this fashion. Hope This helps Donny D From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Groten, Ryan Sent: Wednesday, February 4, 2015 10:11 AM To: Sahina Bose; users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt Nope in fact I followed the guide and found CTDB works quite well. I am just trying to figure out the benefit because that would be another component to consider in the architecture. From: Sahina Bose [mailto:sab...@redhat.com] Sent: Tuesday, February 03, 2015 4:09 AM To: Groten, Ryan; users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt On 01/28/2015 08:59 AM, Groten, Ryan wrote: I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? Theoretically, it should work - if you make sure that you have a replica 3 gluster volume spread across 3 nodes, and these 3 nodes are your compute nodes as well - you should be fine without CTDB setup for failover and mounting as localhost. But I've not tried this to recommend it. Maybe if others have tried it, they can chime in? Btw, is there any reason you do not want to set up CTDB? Thanks, Ryan ThTh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Help understanding Gluster in oVirt
- Original Message - From: Ryan Groten ryan.gro...@stantec.com To: users@ovirt.org Sent: Tuesday, January 27, 2015 7:29:55 PM Subject: [ovirt-users] Help understanding Gluster in oVirt I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? I think that should work -- the vip is important for nfs, and since the hosted engine requires nfs, I just use the vip for the gluster mount as well. For 3.6, I believe gluster will be an option for the hosted engine, and so ctdb will probably not be necessary. Regards, Jason Thanks, Ryan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [Event] 2015 oVirt Asia Workshop
As oVirt strives to become the best open source and comprehensive data center virtualization management suite, and its community rapidly evolves and grows, one of the ways its vibrant community connects is through our Global Workshops. The events are conducted solely to introduce new users and veteran oVirt admins to new features and new techniques found in oVirt, as well as provide a forum for our users to connect directly with the development team behind oVirt. With that in mind, we are pleased to announce that registration is now open for the 2014 oVirt Workshop! The next 2015 oVirt workshop will be co-located with the FOSSAsia in Singapore on March 14, 2015. This workshop is designed to encourage collaboration in our community, lay the foundation for best practices in oVirt use, convey end-user stories, and help answer questions about the project from both a developer and user's perspective. For more information, and to register for the event, visit the Workshop page[1] today! [1] http://www.ovirt.org/Asia_Workshop_Mar_2015 -- Brian Proffitt Community Liaison oVirt Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance)
Thank you very much, it is simple when you know how to do it :) I will try to add some vLANs and install OPNsense or pfSense (we have that in our vmWare environment)... //Staffan 4 feb 2015 kl. 18:45 skrev Donny Davis do...@cloudspin.me: No you just need to create the network in the networks tab, then click on the newly created network and then look at the hosts tab that appears on the bottom of the screen. Click the unattached radio button and pick a host. then you can click setup host networks. drag the new network to and interface and click ok. Then you wait for the network config to be available on the host. Cheers Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Staffan Öhrberg Sent: Wednesday, February 4, 2015 10:29 AM To: Oved Ourfali Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance) Hi, I’m very impressed with oVirt, but I have one small problem. When I’d the installation of hosted-engine I only had one NIC configured, now I want to activate the other NIC (eno2), but according to the install instructions I disabled the NetworkManager, and now I do not know how to activate the second NIC. Do I have to reinstall everything and activate the two NICs during OS install, or can I do it in another way? Regards, Staffan Öhrberg 26 jan 2015 kl. 17:37 skrev Staffan Öhrberg sohrb...@gmail.com: Hi, Just want you to know that I managed to get it to work. I did the same installation, but using an external NAS instead of GlusterFS. Regards, Staffan Öhrberg 7 jan 2015 kl. 09:06 skrev Oved Ourfali ov...@redhat.com: Hi Was the installation of the engine successful? It is a bit weird that it doesn't find this class, so perhaps it is some packaging issue? Can you attach the complete engine.log and server.log? What's the operating system of your engine server? Thanks, Oved - Original Message - From: Staffan Öhrberg sohrb...@gmail.com To: users@ovirt.org Sent: Monday, January 5, 2015 6:03:46 PM Subject: [ovirt-users] oVirt 3.5 ovirt-image-repository (Glance) Hi, Short background, I own a startup company that have been used VMware ESXi for a year and are trying oVirt to see if that can be a replacement for us. I have just installed oVirt 3.5, but have trouble accessing ovirt-image-repository,Glance ( http://glance.ovirt.org:9292 ). In the admin console it just says: ”Error while executing action: A Request to the server failed with the following Status Code: 500” In the server.log I got a lot of errors: 2015-01-05 16:57:01,881 ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[default-host].[ /ovirt-engine/webadmin]] (ajp--127.0.0.1-8702-7) Exception while dispatching incoming RPC call: com.google.gwt.user.server.rpc.UnexpectedException: Service method 'public abstract org.ovirt.engine.core.common.action.VdcReturnValueBase org.ovirt.engine.ui.frontend.gwtservices.GenericApiGWTService.runAction(org.ovirt.engine.core.common.action.VdcActionType,org.ovirt.engine.core.common.action.VdcActionParametersBase)' threw an unexpected exception: javax.ejb.EJBException: java.lang.RuntimeException: java.lang.NoClassDefFoundError: Could not initialize class com.woorea.openstack.glance.Glance …. I have search for an answer, but have not found one. Anyone in this forum have any idea of whats wrong? Regards, Staffan Öhrberg ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Help understanding Gluster in oVirt
I am using ctdb for my storage only nodes and I must be doing something wrong because I still have selinux problems without using gluster to replicate my meta data for ctdb. They are storage only so turning off selinux doesn't bother me quite as much. Ctdb does work quite well for that purpose, as its a distribute only gluster. BTW thank you for the tutorial, I was kinda lost with glusterfs before I read it. Donny DOn Feb 4, 2015 2:35 PM, Jason Brooks jbro...@redhat.com wrote: - Original Message - From: Donny Davis do...@cloudspin.me To: Jason Brooks jbro...@redhat.com, Ryan Groten ryan.gro...@stantec.com Cc: users@ovirt.org Sent: Wednesday, February 4, 2015 1:02:18 PM Subject: RE: [ovirt-users] Help understanding Gluster in oVirt I am in the process of adding two more nodes to my hosted-engine setup using localhost as the mount point, I will report how it goes. I guess it would really be dependent on how the system was setup. Each node would have to be exactly the same to expect good results. My major issue with ctdb is SELINUX, I cannot get it to run correctly and work with SELINUX enabled. I would define that as a major security hole on a hypervisor, but I'm sure I am just doing it wrong. Yeah, in my howto I'm using the meta volume that ctdb uses for its lock file to also store the config files for ctdb, and that's what selinux doesn't like. It's not really necessary, though, the configs could just be copied into the default locations on each node -- I think that would resolve the selinux issue. Jason Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jason Brooks Sent: Wednesday, February 4, 2015 12:31 PM To: Ryan Groten Cc: users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt - Original Message - From: Ryan Groten ryan.gro...@stantec.com To: users@ovirt.org Sent: Tuesday, January 27, 2015 7:29:55 PM Subject: [ovirt-users] Help understanding Gluster in oVirt I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? I think that should work -- the vip is important for nfs, and since the hosted engine requires nfs, I just use the vip for the gluster mount as well. For 3.6, I believe gluster will be an option for the hosted engine, and so ctdb will probably not be necessary. Regards, Jason Thanks, Ryan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Help understanding Gluster in oVirt
- Original Message - From: Donny Davis do...@cloudspin.me To: Jason Brooks jbro...@redhat.com, Ryan Groten ryan.gro...@stantec.com Cc: users@ovirt.org Sent: Wednesday, February 4, 2015 1:02:18 PM Subject: RE: [ovirt-users] Help understanding Gluster in oVirt I am in the process of adding two more nodes to my hosted-engine setup using localhost as the mount point, I will report how it goes. I guess it would really be dependent on how the system was setup. Each node would have to be exactly the same to expect good results. My major issue with ctdb is SELINUX, I cannot get it to run correctly and work with SELINUX enabled. I would define that as a major security hole on a hypervisor, but I'm sure I am just doing it wrong. Yeah, in my howto I'm using the meta volume that ctdb uses for its lock file to also store the config files for ctdb, and that's what selinux doesn't like. It's not really necessary, though, the configs could just be copied into the default locations on each node -- I think that would resolve the selinux issue. Jason Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jason Brooks Sent: Wednesday, February 4, 2015 12:31 PM To: Ryan Groten Cc: users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt - Original Message - From: Ryan Groten ryan.gro...@stantec.com To: users@ovirt.org Sent: Tuesday, January 27, 2015 7:29:55 PM Subject: [ovirt-users] Help understanding Gluster in oVirt I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? I think that should work -- the vip is important for nfs, and since the hosted engine requires nfs, I just use the vip for the gluster mount as well. For 3.6, I believe gluster will be an option for the hosted engine, and so ctdb will probably not be necessary. Regards, Jason Thanks, Ryan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Ovirt qouta
Does anyone know if there if a way to set quotas without manually doing it for each user. As many of you already know I am the proprietor of cloudspin.me where I offer IaaS for free on ipv6. I would like to set per user quotas without having to manually do it for each person. In the next couple weeks I am going to make a lot more storage available to users, and it would be nice if they could set things up how they want... One big machine, many little machines... Etc Any idea's Thanks Donny D ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Help understanding Gluster in oVirt
I am in the process of adding two more nodes to my hosted-engine setup using localhost as the mount point, I will report how it goes. I guess it would really be dependent on how the system was setup. Each node would have to be exactly the same to expect good results. My major issue with ctdb is SELINUX, I cannot get it to run correctly and work with SELINUX enabled. I would define that as a major security hole on a hypervisor, but I'm sure I am just doing it wrong. Donny D -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Jason Brooks Sent: Wednesday, February 4, 2015 12:31 PM To: Ryan Groten Cc: users@ovirt.org Subject: Re: [ovirt-users] Help understanding Gluster in oVirt - Original Message - From: Ryan Groten ryan.gro...@stantec.com To: users@ovirt.org Sent: Tuesday, January 27, 2015 7:29:55 PM Subject: [ovirt-users] Help understanding Gluster in oVirt I was planning on making a Gluster Data domain to test, and found some great information on this page: http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ The article the author uses the CTDB service for VIP failover. Is it possible/recommended to not do this, and just create a gluster volume on all the hosts in a cluster, then create the Gluster data domain as localhost:gluster_vol? I think that should work -- the vip is important for nfs, and since the hosted engine requires nfs, I just use the vip for the gluster mount as well. For 3.6, I believe gluster will be an option for the hosted engine, and so ctdb will probably not be necessary. Regards, Jason Thanks, Ryan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Bring down one of multiple storage domains in a data center
Hi, We are planning to use oVirt to manage our virtual machine infrastructure. We would like to connect two different storage boxes to the hosts, which I believe will result in two storage domains in the same datacenter for oVirt? One of the storage boxes sometimes has to be powered down during building maintenance (electricity, cooling, ...). Will the data center with the two storage domains attached still be considered up when one of the storage domains is no longer available? Is it sufficient to power down the VM's with disks on the affected storage domain and to put the affected storage domain in maintenance? Will oVirt keep the datacenter up and keep on managing the remaining VM's on the other storage domain? One of the storage domains will be a SAS-connected external storage box. There will be two SAS connections per host to the storage box so multipath should see the two paths. My understanding is that anything detected by multipathd is considered FC storage by oVirt. Is that correct? Regards, Rik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] importing iscsi storage domain
If you can't see the VMs under 'VM Import' subtab under the imported storage domain, it means that you won't be able to recover those VMs (because their configuration files weren't uploaded to the domain). For the next time, you can decrease the time interval of the OVFs upload as explained below in the thread. Regarding the upgrade, it is possible to upgrade from 3.4 to 3.5 and once you'll upgrade the setup and the DC compatibility version to 3.5, the OVFs of the VMs will be uploaded to the storage domains where the VMs's disks are located on. (again, every 60 minutes by default). Elad Ben Aharon RHEV-QE storage - Original Message - From: Steven M. Bellistri sbellis...@ldirx.com To: Elad Ben Aharon ebena...@redhat.com Cc: Aharon Canan aca...@redhat.com, users@ovirt.org Sent: Wednesday, 4 February, 2015 5:44:37 PM Subject: RE: [ovirt-users] importing iscsi storage domain No, I did not wait 60 minutes before I tried to failover. Do, I need to start over, or can I just failback and wait the hour for the ovfs to upload? I do have a question, is this feature possible for an environment that was upgraded from 3.4 to 3.5? My production environment is 3.4, the 3.5 environment is a clean test environment, but if I cant upgrade to 3.5 from 3.4 then this will not be a good DR option for me. thanks From: Elad Ben Aharon [mailto:ebena...@redhat.com] Sent: Wednesday, February 4, 2015 8:56 AM To: Steven M. Bellistri Cc: Aharon Canan; users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain Hi Steven, In order to import the VMs from the imported storage domain, the VMs configuration files (which are called OVFs) have to be uploaded first before the domain is detached from the setup. This is being done by engine in a time interval of 60 minutes (it's configurable using rhevm-config --set OvfUpdateInMinutes=value and restart ovirt-engine service). From 3.5.1, the OVFs are uploaded once you move the storage domain to maintenance. did you do so in the original RHEV environment? What was the version of this environment? If you didn't deactivate the domain in the first environment and then tried to attach it to the DR environment, the existence of the VMs in the domain depends on the OVFs upload that was supposed to be done by the first engine, which is being done every 60 minutes as explained, so if you've created those VMs and immediately destroyed the setup, those VMs probably won't be available for you in the DR environment. Elad Ben Aharon RHEV-QE storage - Original Message - From: Steven M. Bellistri sbellis...@ldirx.com To: Aharon Canan aca...@redhat.com Cc: users@ovirt.org Sent: Tuesday, 3 February, 2015 6:16:01 PM Subject: Re: [ovirt-users] importing iscsi storage domain version 3.5.1 From: Aharon Canan [ mailto:aca...@redhat.com ] Sent: Tuesday, February 3, 2015 6:22 AM To: Steven M. Bellistri Cc: users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain What version are you using? Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.com From: Steven M. Bellistri sbellis...@ldirx.com To: Aharon Canan aca...@redhat.com Cc: users@ovirt.org Sent: Monday, February 2, 2015 8:12:00 PM Subject: RE: [ovirt-users] importing iscsi storage domain Thank you for the response. I went thru the steps 1-9, and when I get to step 10 there is no import vms or import templates sub-tabs. I am including the vdsm.log from the host. Also, when I do a lvs on the host, I can see the disks that reside in the imported SD, one is 30gb and the other is 40gb. The storage domain I am importing is called iSCSI. From: Aharon Canan [ mailto:aca...@redhat.com ] Sent: Sunday, February 1, 2015 9:55 AM To: Steven M. Bellistri Cc: users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain Hi Please check below link for info, ovirt version should be 3.5 http://www.ovirt.org/Features/ImportStorageDomain please be aware to step 10 under Work flow for Import block Storage Domain - UI flow In case it is not working, please add exact steps and engine/vdsm logs so we will be able to check Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.com blockquote From: Steven M. Bellistri sbellis...@ldirx.com To: users@ovirt.org users@ovirt.org Sent: Friday, January 30, 2015 12:18:54 AM Subject: [ovirt-users] importing iscsi storage domain I am trying to test failing over to a DR site using the storage domain import. The DR site shows that it imported the iscsi storage domain, and activates it in the datacenter, but none of the vm’s or anything shows up. What am I missing.
Re: [ovirt-users] dwh not receiving any data
Hi, After researching this issue it seams that this is a one time error that should be resolved after a minute. Can you please share with me: 1. if you keep getting this error after a minute ? 2. if you can currently log to your ovirt-engine-history database and see if you see in the vm_samples_history table new up to date samples? Thank you for sharing and helping with this issue. Best regards, --- Shirly Radco BI Software Engineer Red Hat Israel Ltd. - Original Message - From: Punit Dambiwal hypu...@gmail.com To: Joop jvdw...@xs4all.nl Cc: users@ovirt.org Sent: Monday, February 2, 2015 10:32:21 AM Subject: Re: [ovirt-users] dwh not receiving any data Hi, I am also facing the same issue with ovirt reports and DWHstill didn't find any way to solve itis there any body from community can help... On Sun, Feb 1, 2015 at 10:42 PM, Joop jvdw...@xs4all.nl wrote: On 1-2-2015 10:24, Shirly Radco wrote: Hi David, It means that for some reason user with user_id ab932902-cead-4435-a2b6-8b88576feab6 was not added to users_details_history. And this is why the etl can't update the vm_samples_history table on the ovirt_engine_history database. Please check if this user_id ab932902-cead-4435-a2b6-8b88576feab6 exists in the dwh_users_history_view or in the users table in the engine database. Select * From dwh_users_history_view Where user_id = 'ab932902-cead-4435-a2b6-8b88576feab6'; I suspect I have the same problem. Upgraded (3.5.0-3.5.1) my test instance at home at look at some reports but saw no new data. Thought is was just me and had no time to check things out but will do when I have a bit of time and report back. Regards, Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] dwh not receiving any data
About this issue, our best practice is to use UTC time for all the machines and sync them with nfp. We have a bug open on moving to ISO time to resolve some issues with date pattern, but it's not in yet. Yaniv On 02/04/2015 03:33 AM, Punit Dambiwal wrote: Hi, VM is up and running and to make the graphi manually make some dd and cpu stress on the VM I created the dump with Ovirt backup tool engine-backup --mode=backup --scope=db --file=BACKUP_FILE --log=LOG_FILE I also communicated with ovirt-china community...they found that there is some time difference between postgres and jdk... Inline image 1 Thanks, Punit Thanks, Punit On Tue, Feb 3, 2015 at 7:30 PM, Yaniv Dary yd...@redhat.com mailto:yd...@redhat.com wrote: Also is there a chance the vm was shutdown? On 02/03/2015 01:29 PM, Yaniv Dary wrote: The logs seem ok, is there a chance you simply don't have activity after 17:00? try to hover around the bottom of the graph a tool tip should appear if the value and if it's 0%. On 02/03/2015 08:31 AM, Punit Dambiwal wrote: Hi Shirly, Please find the attached log files... On Tue, Feb 3, 2015 at 1:56 PM, Shirly Radco sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com wrote: Hi Punit, Please send me first the logs so we can see if this is still the same issue. /var/log/ovirt-engine /var/log/ovirt-engine-dwh /var/log/ovirt-engine-reports Best regards, --- Shirly Radco BI Software Engineer Red Hat Israel Ltd. - Original Message - From: Punit Dambiwal hypu...@gmail.com mailto:hypu...@gmail.com mailto:hypu...@gmail.com mailto:hypu...@gmail.com To: Shirly Radco sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com Cc: David van zeebroeck da...@analytics.brusselsairport.be mailto:da...@analytics.brusselsairport.be mailto:da...@analytics.brusselsairport.be mailto:da...@analytics.brusselsairport.be, Joop jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl mailto:jvdw...@xs4all.nl, users@ovirt.org mailto:users@ovirt.org mailto:users@ovirt.org mailto:users@ovirt.org Sent: Tuesday, February 3, 2015 5:50:57 AM Subject: Re: [ovirt-users] dwh not receiving any data Hi Shirly, It seems resolved but actually notagain after 12 hours it stopped working... [image: Inline image 1] [image: Inline image 3] It stopped working after 5:00 AMyesterday (2nd Feb) started at evening 17:00 PM...and stopped today 3rd Feb 5:00 AM [image: Inline image 4] Please let me know how i can take the dump of engine and dwh to you Thanks, Punit On Tue, Feb 3, 2015 at 9:34 AM, Punit Dambiwal hypu...@gmail.com mailto:hypu...@gmail.com mailto:hypu...@gmail.com mailto:hypu...@gmail.com wrote: Hi, My issue resolved by remove the dwh and reports and reinstall again..also i found that my server time was correct and updated but the postgresql time was different form the server time.above two changes made it work... Thanks, punit On Mon, Feb 2, 2015 at 8:25 PM, Shirly Radco sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com mailto:sra...@redhat.com wrote: Hi, If any of you can send me the engine and ovirt_engine_dwh dump, I will upload them in my development environment and see what is the issue. Best regards, --- Shirly Radco BI Software Engineer Red Hat Israel Ltd. -
Re: [ovirt-users] importing iscsi storage domain
Hi Steven, In order to import the VMs from the imported storage domain, the VMs configuration files (which are called OVFs) have to be uploaded first before the domain is detached from the setup. This is being done by engine in a time interval of 60 minutes (it's configurable using rhevm-config --set OvfUpdateInMinutes=value and restart ovirt-engine service). From 3.5.1, the OVFs are uploaded once you move the storage domain to maintenance. did you do so in the original RHEV environment? What was the version of this environment? If you didn't deactivate the domain in the first environment and then tried to attach it to the DR environment, the existence of the VMs in the domain depends on the OVFs upload that was supposed to be done by the first engine, which is being done every 60 minutes as explained, so if you've created those VMs and immediately destroyed the setup, those VMs probably won't be available for you in the DR environment. Elad Ben Aharon RHEV-QE storage - Original Message - From: Steven M. Bellistri sbellis...@ldirx.com To: Aharon Canan aca...@redhat.com Cc: users@ovirt.org Sent: Tuesday, 3 February, 2015 6:16:01 PM Subject: Re: [ovirt-users] importing iscsi storage domain version 3.5.1 From: Aharon Canan [mailto:aca...@redhat.com] Sent: Tuesday, February 3, 2015 6:22 AM To: Steven M. Bellistri Cc: users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain What version are you using? Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.com - Original Message - From: Steven M. Bellistri sbellis...@ldirx.com To: Aharon Canan aca...@redhat.com Cc: users@ovirt.org Sent: Monday, February 2, 2015 8:12:00 PM Subject: RE: [ovirt-users] importing iscsi storage domain Thank you for the response. I went thru the steps 1-9, and when I get to step 10 there is no import vms or import templates sub-tabs. I am including the vdsm.log from the host. Also, when I do a lvs on the host, I can see the disks that reside in the imported SD, one is 30gb and the other is 40gb. The storage domain I am importing is called iSCSI. From: Aharon Canan [ mailto:aca...@redhat.com ] Sent: Sunday, February 1, 2015 9:55 AM To: Steven M. Bellistri Cc: users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain Hi Please check below link for info, ovirt version should be 3.5 http://www.ovirt.org/Features/ImportStorageDomain please be aware to step 10 under Work flow for Import block Storage Domain - UI flow In case it is not working, please add exact steps and engine/vdsm logs so we will be able to check Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.com blockquote From: Steven M. Bellistri sbellis...@ldirx.com To: users@ovirt.org users@ovirt.org Sent: Friday, January 30, 2015 12:18:54 AM Subject: [ovirt-users] importing iscsi storage domain I am trying to test failing over to a DR site using the storage domain import. The DR site shows that it imported the iscsi storage domain, and activates it in the datacenter, but none of the vm’s or anything shows up. What am I missing. thanks Steven Bellistri This email and its attachments may contain privileged and confidential information and/or protected health information (PHI) intended solely for the use of LDI Integrated Pharmacy Services and the recipient(s) named above. If you are not the recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution, printing or copying of this email message and/or any attachments is strictly prohibited. If you have received this transmission in error, please notify the sender immediately at 1-866-516-3121 and permanently delete this email and any attachments. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This email and its attachments may contain privileged and confidential information and/or protected health information (PHI) intended solely for the use of LDI Integrated Pharmacy Services and the recipient(s) named above. If you are not the recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution, printing or copying of this email message and/or any attachments is strictly prohibited. If you have received this transmission in error, please notify the sender immediately at 1-866-516-3121 and permanently delete this email and any attachments. /blockquote This email and its attachments may contain
Re: [ovirt-users] importing iscsi storage domain
No, I did not wait 60 minutes before I tried to failover. Do, I need to start over, or can I just failback and wait the hour for the ovfs to upload? I do have a question, is this feature possible for an environment that was upgraded from 3.4 to 3.5? My production environment is 3.4, the 3.5 environment is a clean test environment, but if I cant upgrade to 3.5 from 3.4 then this will not be a good DR option for me. thanks From: Elad Ben Aharon [mailto:ebena...@redhat.com] Sent: Wednesday, February 4, 2015 8:56 AM To: Steven M. Bellistri Cc: Aharon Canan; users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain Hi Steven, In order to import the VMs from the imported storage domain, the VMs configuration files (which are called OVFs) have to be uploaded first before the domain is detached from the setup. This is being done by engine in a time interval of 60 minutes (it's configurable using rhevm-config --set OvfUpdateInMinutes=value and restart ovirt-engine service). From 3.5.1, the OVFs are uploaded once you move the storage domain to maintenance. did you do so in the original RHEV environment? What was the version of this environment? If you didn't deactivate the domain in the first environment and then tried to attach it to the DR environment, the existence of the VMs in the domain depends on the OVFs upload that was supposed to be done by the first engine, which is being done every 60 minutes as explained, so if you've created those VMs and immediately destroyed the setup, those VMs probably won't be available for you in the DR environment. Elad Ben Aharon RHEV-QE storage [cid:image001.jpg@01D0405F.2C325030] From: Steven M. Bellistri sbellis...@ldirx.commailto:sbellis...@ldirx.com To: Aharon Canan aca...@redhat.commailto:aca...@redhat.com Cc: users@ovirt.orgmailto:users@ovirt.org Sent: Tuesday, 3 February, 2015 6:16:01 PM Subject: Re: [ovirt-users] importing iscsi storage domain version 3.5.1 From: Aharon Canan [mailto:aca...@redhat.com] Sent: Tuesday, February 3, 2015 6:22 AM To: Steven M. Bellistri Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain What version are you using? Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.commailto:aca...@redhat.com From: Steven M. Bellistri sbellis...@ldirx.commailto:sbellis...@ldirx.com To: Aharon Canan aca...@redhat.commailto:aca...@redhat.com Cc: users@ovirt.orgmailto:users@ovirt.org Sent: Monday, February 2, 2015 8:12:00 PM Subject: RE: [ovirt-users] importing iscsi storage domain Thank you for the response. I went thru the steps 1-9, and when I get to step 10 there is no import vms or import templates sub-tabs. I am including the vdsm.log from the host. Also, when I do a lvs on the host, I can see the disks that reside in the imported SD, one is 30gb and the other is 40gb. The storage domain I am importing is called iSCSI. From: Aharon Canan [mailto:aca...@redhat.com] Sent: Sunday, February 1, 2015 9:55 AM To: Steven M. Bellistri Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] importing iscsi storage domain Hi Please check below link for info, ovirt version should be 3.5 http://www.ovirt.org/Features/ImportStorageDomain please be aware to step 10 under Work flow for Import block Storage Domain - UI flow In case it is not working, please add exact steps and engine/vdsm logs so we will be able to check Regards, __ Aharon Canan int phone - 8272036 ext phone - +97297692036 email - aca...@redhat.commailto:aca...@redhat.com From: Steven M. Bellistri sbellis...@ldirx.commailto:sbellis...@ldirx.com To: users@ovirt.orgmailto:users@ovirt.org users@ovirt.orgmailto:users@ovirt.org Sent: Friday, January 30, 2015 12:18:54 AM Subject: [ovirt-users] importing iscsi storage domain I am trying to test failing over to a DR site using the storage domain import. The DR site shows that it imported the iscsi storage domain, and activates it in the datacenter, but none of the vm’s or anything shows up. What am I missing. thanks Steven Bellistri This email and its attachments may contain privileged and confidential information and/or protected health information (PHI) intended solely for the use of LDI Integrated Pharmacy Services and the recipient(s) named above. If you are not the recipient, or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, dissemination, distribution, printing or copying of this email message and/or any attachments is strictly prohibited. If you have received this transmission in error, please notify the sender immediately at 1-866-516-3121 and permanently delete this email and any