Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Vinzenz Feenstra 

> On Jun 7, 2016, at 11:13 PM, Pavel Gashev  wrote:
> 
> It seems guest tools installer is broken at least for Windows 2012 R2. It 
> installs files into Program Files, but doesn't actually install drivers and 
> QEMU guest tools. No errors, it reports that everything is ok, but it's not. 
> oVirt guest tools is installed and work properly.
>  
> Workarounds are the following:
> 1. Start Device Manager and make sure all devices have drivers. Install 
> drivers from «C:\Program Files (x86)\oVirt Guest Tools\drivers» if needed. Do 
> not install video driver.
> 2. Start «C:\Program Files (x86)\oVirt Guest Tools\drivers\qemu-ga-x64.exe» 
> manually.
> 3. Rename «C:\Program Files (x86)\oVirt Guest Tools\drivers\Balloon\2k12R2» 
> into «…\w2k12R2», otherwise installed balloon service doesn't start.
>  

Lev: This ^ looks like a regression in the installer - Please have a look :-) 
Thanks

>  
> From: > on behalf of 
> Anantha Raghava  >
> Organization: eXza Technology Consulting & Services
> Reply-To: "rag...@exzatechconsulting.com" 
> Date: Tuesday 7 June 2016 at 20:43
> To: Michal Skrivanek 
> Cc: users 
> Subject: Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.
>  
> Hello Michal,
> 
> Guest tools are working and getting all details about guest vm as needed.
> 
> But one thing I didn't understand. What is the relationship between 
> virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
> guest services does not start.
> 
> Also, how do we install memory baloon driver?
> 
> Tomorrow morning, I will post about Live Migration events after I attempt it.
> -- 
> 
> Thanks & Regards,
>  
> Anantha Raghava
>  
> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
>  
> On 03 Jun 2016, at 12:57, Anantha Raghava  > wrote:
>  
> Hello Michal,
> 
> Thanks for quick feed back.
> 
> Windows Guests Agents - Where do I download them from? Not getting the proper 
> links. Or is to a part of virt-drivers that we use during installation.
>  
> Hi Anantha,
> it’s part of ovirt-guest-tools. See 
> http://lists.ovirt.org/pipermail/users/2016-May/039779.html 
> 
>  
> 
> Live migration failure - These are pretty busy VMs if not big. The event does 
> not show any specific message but just as migration failed. Is the reason 
> logged somewhere? Please share the log location so that I can check & share 
> the log for meaningful message and proper screen shots.
>  
> There should be more details in the events at the bottom of the webadmin page 
> (just make it a bit bigger it may not be te last message)
> If they are busy VMs then you may have issues migrating them. There is some 
> simple tuning available and it may help. You can increase the maximum 
> downtime in VM properties dialog (500ms by default, you can go up to whatever 
> is feasible for your VM, seconds, tens of seconds)
> Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you 
> can also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 
> 10 times
>  
> Thanks,
> michal
> 
> 
>  
> -- 
> Thanks & Regards,
> 
>  
> 
> Anantha Raghava
>  
> On 03 Jun 2016, at 07:14, Anantha Raghava  > wrote:
>  
> Hi,
> 
> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
> Channel storage box. Every thing is working fine except the following.
> 
> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. 
> VM properties does not report the Operating System nor it shows the IP and 
> FQDN in the Admin Portal. There is always an exclamation mark that reports 
> about OS being different from the template and timezone issues. We have 
> changed the timezone to Indian Standard Time in both VM and Host, same result 
> continues. We have installed Windows Gues Tools, same result continues. 
> Screen shot is below.
>  
> you doesn’t seem to run the guest agent. Make sure the service is started and 
> works, then you’ll see IPs and more detailed info about each guest, and 
> exclamation marks should go away
> 
> 
> 
> 
> 
> 2. When we manually tried to migrate the VMs from one host to another one, 
> the migration gets initiated, but will eventually fail.
> 
> Any specific setting missing here or is it a bug.
>  
> are they big or busy VMs? What does it fail on? There should be a menaingful 
> message even if it’s just a timeout
> 
> 
> 
> Note: 
> 
> All hosts are installed with CentOS 7.2 minimal installation oVirt node is 
> installed and activated.
> We do not have a DNS in our environment. We have to do with IPs. 
>  
> as long as engine

[ovirt-users] video memory in virtual machine

2016-06-07 Thread qinglong.d...@horebdata.cn 
I have found that playing video is not fluent in the virtual machine. So I 
thought maybe too small video memory in virtual machines led to this. Some 
parameters have been found when I was trying to check some information. So I 
wonder where to modify them and if it works to do this.

-device qxl-vga,id=video0,ram_size=67108864,vram_size=8388608,vgamem_mb=16

Anyone can help?



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt VM

2016-06-07 Thread Will Dennis 
The "-r" arg to virsh makes all the difference :)  (much to learn...)

[root@ovirt-node-03 ~]# virsh -r list
 IdName   State

 6 proxmox-01 running
 7 proxmox-02 running

[root@ovirt-node-03 ~]# virsh -r dumpxml proxmox-01

  proxmox-01
  1a49b65b-9950-4b29-8c72-139d5263e11d
  http://ovirt.org/vm/tune/1.0;>

  
  4294967296
  8388608
  8388608
  16
  
1020
  
  

  
  
/machine
  
  

  oVirt
  oVirt Node
  7-2.1511.el7.centos.2.10
  271BC900-7252-11DD-8001-002185350C3C
  1a49b65b-9950-4b29-8c72-139d5263e11d

  
  
hvm


  
  

  
  
Penryn


  

  
  



  
  destroy
  restart
  destroy
  
/usr/libexec/qemu-kvm

  
  
  
  
  
  
  
  
  


  
  
  
  
  aeae1aeb-047e-493f-a70c-f471f2e7245c
  
  
  


  
  


  
  


  
  


  


  
  
  
  
  
  
  
  


  
  
  
  


  
  
  
  


  
  
  




  


  
  
  


  

  


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Pavel Gashev 
It seems guest tools installer is broken at least for Windows 2012 R2. It 
installs files into Program Files, but doesn't actually install drivers and 
QEMU guest tools. No errors, it reports that everything is ok, but it's not. 
oVirt guest tools is installed and work properly.

Workarounds are the following:
1. Start Device Manager and make sure all devices have drivers. Install drivers 
from «C:\Program Files (x86)\oVirt Guest Tools\drivers» if needed. Do not 
install video driver.
2. Start «C:\Program Files (x86)\oVirt Guest Tools\drivers\qemu-ga-x64.exe» 
manually.
3. Rename «C:\Program Files (x86)\oVirt Guest Tools\drivers\Balloon\2k12R2» 
into «…\w2k12R2», otherwise installed balloon service doesn't start.


From:  on behalf of Anantha Raghava 

Organization: eXza Technology Consulting & Services
Reply-To: "rag...@exzatechconsulting.com" 
Date: Tuesday 7 June 2016 at 20:43
To: Michal Skrivanek 
Cc: users 
Subject: Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

Hello Michal,

Guest tools are working and getting all details about guest vm as needed.

But one thing I didn't understand. What is the relationship between 
virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
guest services does not start.

Also, how do we install memory baloon driver?

Tomorrow morning, I will post about Live Migration events after I attempt it.

--

Thanks & Regards,



Anantha Raghava

On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:

On 03 Jun 2016, at 12:57, Anantha Raghava 
> wrote:

Hello Michal,

Thanks for quick feed back.

Windows Guests Agents - Where do I download them from? Not getting the proper 
links. Or is to a part of virt-drivers that we use during installation.

Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html


Live migration failure - These are pretty busy VMs if not big. The event does 
not show any specific message but just as migration failed. Is the reason 
logged somewhere? Please share the log location so that I can check & share the 
log for meaningful message and proper screen shots.

There should be more details in the events at the bottom of the webadmin page 
(just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There is some 
simple tuning available and it may help. You can increase the maximum downtime 
in VM properties dialog (500ms by default, you can go up to whatever is 
feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you can 
also tune /etc/vdsm.conf on each host and increase the maximum bandwidth 10 
times

Thanks,
michal



--
Thanks & Regards,

Anantha Raghava

On 03 Jun 2016, at 07:14, Anantha Raghava 
> wrote:

Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre 
Channel storage box. Every thing is working fine except the following.

1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2 OS. 
VM properties does not report the Operating System nor it shows the IP and FQDN 
in the Admin Portal. There is always an exclamation mark that reports about OS 
being different from the template and timezone issues. We have changed the 
timezone to Indian Standard Time in both VM and Host, same result continues. We 
have installed Windows Gues Tools, same result continues. Screen shot is below.

you doesn’t seem to run the guest agent. Make sure the service is started and 
works, then you’ll see IPs and more detailed info about each guest, and 
exclamation marks should go away





2. When we manually tried to migrate the VMs from one host to another one, the 
migration gets initiated, but will eventually fail.

Any specific setting missing here or is it a bug.

are they big or busy VMs? What does it fail on? There should be a menaingful 
message even if it’s just a timeout



Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt node is 
installed and activated.
We do not have a DNS in our environment. We have to do with IPs.

as long as engine works with FQDN it’s ok


We are yet to apply the 3.6.6 patch on Engine and Nodes.

that may help with some of the issues above, so please try to do that

Thanks,
michal


We are running a stand alone engine, not a Hosted Engine.
--
Thanks & Regards,

Anantha Raghava
eXza Technology Consulting & Services

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Yaniv Kaul 
On Tue, Jun 7, 2016 at 8:43 PM, Anantha Raghava <
rag...@exzatechconsulting.com> wrote:

> Hello Michal,
>
> Guest tools are working and getting all details about guest vm as needed.
>
> But one thing I didn't understand. What is the relationship between
> virtioserial driver and oVirt Guest Service? Without virtio serial driver,
> guest services does not start.
>

True. The transport to communicate with the guest agent is via the virtio
serial channel.


> Also, how do we install memory baloon driver?
>

The regular guest tools installer should install it.
If you can provide more details, that'd be helpful.
Y.


>
> Tomorrow morning, I will post about Live Migration events after I attempt
> it.
>
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava
> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
>
>
> On 03 Jun 2016, at 12:57, Anantha Raghava <
> rag...@exzatechconsulting.com> wrote:
>
> Hello Michal,
>
> Thanks for quick feed back.
>
> Windows Guests Agents - Where do I download them from? Not getting the
> proper links. Or is to a part of virt-drivers that we use during
> installation.
>
>
> Hi Anantha,
> it’s part of ovirt-guest-tools. See
> http://lists.ovirt.org/pipermail/users/2016-May/039779.html
>
>
> Live migration failure - These are pretty busy VMs if not big. The event
> does not show any specific message but just as migration failed. Is the
> reason logged somewhere? Please share the log location so that I can check
> & share the log for meaningful message and proper screen shots.
>
>
> There should be more details in the events at the bottom of the webadmin
> page (just make it a bit bigger it may not be te last message)
> If they are busy VMs then you may have issues migrating them. There is
> some simple tuning available and it may help. You can increase the maximum
> downtime in VM properties dialog (500ms by default, you can go up to
> whatever is feasible for your VM, seconds, tens of seconds)
> Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you
> can also tune /etc/vdsm.conf on each host and increase the maximum
> bandwidth 10 times
>
> Thanks,
> michal
>
>
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava
>
> On 03 Jun 2016, at 07:14, Anantha Raghava 
> wrote:
>
> Hi,
>
> We have just installed oVirt 3.6 on 3 hosts with storage volumes on Fibre
> Channel storage box. Every thing is working fine except the following.
>
> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 R2
> OS. VM properties does not report the Operating System nor it shows the IP
> and FQDN in the Admin Portal. There is always an exclamation mark that
> reports about OS being different from the template and timezone issues. We
> have changed the timezone to Indian Standard Time in both VM and Host, same
> result continues. We have installed Windows Gues Tools, same result
> continues. Screen shot is below.
>
>
> you doesn’t seem to run the guest agent. Make sure the service is started
> and works, then you’ll see IPs and more detailed info about each guest, and
> exclamation marks should go away
>
>
> 
>
> 2. When we manually tried to migrate the VMs from one host to another one,
> the migration gets initiated, but will eventually fail.
>
> Any specific setting missing here or is it a bug.
>
>
> are they big or busy VMs? What does it fail on? There should be a
> menaingful message even if it’s just a timeout
>
>
> Note:
>
> All hosts are installed with CentOS 7.2 minimal installation oVirt node is
> installed and activated.
> We do not have a DNS in our environment. We have to do with IPs.
>
>
> as long as engine works with FQDN it’s ok
>
> We are yet to apply the 3.6.6 patch on Engine and Nodes.
>
>
> that may help with some of the issues above, so please try to do that
>
> Thanks,
> michal
>
> We are running a stand alone engine, not a Hosted Engine.
> --
>
> Thanks & Regards,
>
>
> Anantha Raghava eXza Technology Consulting & Services
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] oVirt Windows Guest Tools & Live Migration issues.

2016-06-07 Thread Anantha Raghava 

Hello Michal,

Guest tools are working and getting all details about guest vm as needed.

But one thing I didn't understand. What is the relationship between 
virtioserial driver and oVirt Guest Service? Without virtio serial 
driver, guest services does not start.


Also, how do we install memory baloon driver?

Tomorrow morning, I will post about Live Migration events after I 
attempt it.


--

Thanks & Regards,


Anantha Raghava


On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:


On 03 Jun 2016, at 12:57, Anantha Raghava 
> wrote:


Hello Michal,

Thanks for quick feed back.

Windows Guests Agents - Where do I download them from? Not getting 
the proper links. Or is to a part of virt-drivers that we use during 
installation.


Hi Anantha,
it’s part of ovirt-guest-tools. See 
http://lists.ovirt.org/pipermail/users/2016-May/039779.html




Live migration failure - These are pretty busy VMs if not big. The 
event does not show any specific message but just as migration 
failed. Is the reason logged somewhere? Please share the log location 
so that I can check & share the log for meaningful message and proper 
screen shots.


There should be more details in the events at the bottom of the 
webadmin page (just make it a bit bigger it may not be te last message)
If they are busy VMs then you may have issues migrating them. There is 
some simple tuning available and it may help. You can increase the 
maximum downtime in VM properties dialog (500ms by default, you can go 
up to whatever is feasible for your VM, seconds, tens of seconds)
Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl 
you can also tune /etc/vdsm.conf on each host and increase the maximum 
bandwidth 10 times


Thanks,
michal



--

Thanks & Regards,


Anantha Raghava


On 03 Jun 2016, at 07:14, Anantha Raghava 
 wrote:


Hi,

We have just installed oVirt 3.6 on 3 hosts with storage volumes on 
Fibre Channel storage box. Every thing is working fine except the 
following.


1. We have created 15 Virtual Machines all VM with Windows Server 
2012 R2 OS. VM properties does not report the Operating System nor 
it shows the IP and FQDN in the Admin Portal. There is always an 
exclamation mark that reports about OS being different from the 
template and timezone issues. We have changed the timezone to 
Indian Standard Time in both VM and Host, same result continues. We 
have installed Windows Gues Tools, same result continues. Screen 
shot is below.


you doesn’t seem to run the guest agent. Make sure the service is 
started and works, then you’ll see IPs and more detailed info about 
each guest, and exclamation marks should go away






2. When we manually tried to migrate the VMs from one host to 
another one, the migration gets initiated, but will eventually fail.


Any specific setting missing here or is it a bug.


are they big or busy VMs? What does it fail on? There should be a 
menaingful message even if it’s just a timeout




Note:

All hosts are installed with CentOS 7.2 minimal installation oVirt 
node is installed and activated.

We do not have a DNS in our environment. We have to do with IPs.


as long as engine works with FQDN it’s ok


We are yet to apply the 3.6.6 patch on Engine and Nodes.


that may help with some of the issues above, so please try to do that

Thanks,
michal


We are running a stand alone engine, not a Hosted Engine.
--

Thanks & Regards,


Anantha Raghava

eXza Technology Consulting & Services


___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users








___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] PCI Passthrough problem

2016-06-07 Thread Lionel Caignec 
Hi i'm coworker of Mr Chapelle,

Thank you for your reply.

so if i understand we need to "downgrade" our ovirt engine which is in version 
3.6.6.x to version 3.6.5?
But how can we do that?

Lionel Caignec.



- Mail original -
De: "Martin Polednik" 
À: "chapelle" 
Cc: "users" , "honvault" 
Envoyé: Mardi 7 Juin 2016 17:11:10
Objet: Re: [ovirt-users] PCI Passthrough problem

On 07/06/16 16:50 +0200, Jérôme Chapelle wrote:
>We are no more able to give a pci device to one VM.
>Here is the process we used to assign one device to one VM:
>- Click on the VM, and then on the tab "Host devices"
>- In the tab, click on "pin to host" and select the host that will give the 
>pci device
>- Click on "add device", in the window appear all the pci devices: choose the 
>pci card you wish (ex. pci__83_00_0 pci__83_00_1) and then click on 
>the gray arrow to assign this device to the VM
>- Click on ok
>- boot the VM.
>The problem is that in the window that appears, there is not a single pci 
>device listed (there should be many listed).
>I checked first: the IOMMU setting is set in the kernel.
>
>Our environment:
>We have two HV running CentOs7.
>Each of them have three fiber channel cards. First card is connected to a disk 
>array, second one to the first tape library and third one to another tape 
>library.
>We used to give the second card to a VM1, and the third card to another VM2. 
>Both VMs ran on one HV or on the other in the past: everything was fine.
>What happened:
>Today we add to upgrade one of the HV (HV1). Both VMs ran on this HV1. We 
>upgraded then restarted the HV1.
>Then I edited the second VM2 in order to remove card from HV1. Then I tried to 
>add the card from HV2 to this VM2: the list of "host devices" is empty.
>I started the VM1: it works fine (I didn't change anything on it).

Hello!

I'm afraid you have hit the bug [1]. For hosts where you need host
devices, the best solution is most likely not upgrading them to 3.6.6
for now.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1341299

>
>-- 
>
>
>   
>   
>   
>   Jérôme Chapelle
>   C entre I nformatique N ational de l' E nseignement S upérieur
>950 rue de Saint Priest
>34 097 M ONTPELLIER Cedex 5
>
>   Tél.04 67 14 14 14
>   eMail   chape...@cines.fr
>

>___
>Users mailing list
>Users@ovirt.org
>http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] PCI Passthrough problem

2016-06-07 Thread Martin Polednik 

On 07/06/16 16:50 +0200, Jérôme Chapelle wrote:

We are no more able to give a pci device to one VM.
Here is the process we used to assign one device to one VM:
- Click on the VM, and then on the tab "Host devices"
- In the tab, click on "pin to host" and select the host that will give the pci 
device
- Click on "add device", in the window appear all the pci devices: choose the 
pci card you wish (ex. pci__83_00_0 pci__83_00_1) and then click on the gray 
arrow to assign this device to the VM
- Click on ok
- boot the VM.
The problem is that in the window that appears, there is not a single pci 
device listed (there should be many listed).
I checked first: the IOMMU setting is set in the kernel.

Our environment:
We have two HV running CentOs7.
Each of them have three fiber channel cards. First card is connected to a disk 
array, second one to the first tape library and third one to another tape 
library.
We used to give the second card to a VM1, and the third card to another VM2. 
Both VMs ran on one HV or on the other in the past: everything was fine.
What happened:
Today we add to upgrade one of the HV (HV1). Both VMs ran on this HV1. We 
upgraded then restarted the HV1.
Then I edited the second VM2 in order to remove card from HV1. Then I tried to add the 
card from HV2 to this VM2: the list of "host devices" is empty.
I started the VM1: it works fine (I didn't change anything on it).


Hello!

I'm afraid you have hit the bug [1]. For hosts where you need host
devices, the best solution is most likely not upgrading them to 3.6.6
for now.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1341299



--





Jérôme Chapelle
C entre I nformatique N ational de l' E nseignement S upérieur
950 rue de Saint Priest
34 097 M ONTPELLIER Cedex 5

Tél.04 67 14 14 14
eMail   chape...@cines.fr




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] PCI Passthrough problem

2016-06-07 Thread Jérôme Chapelle 
We are no more able to give a pci device to one VM. 
Here is the process we used to assign one device to one VM: 
- Click on the VM, and then on the tab "Host devices" 
- In the tab, click on "pin to host" and select the host that will give the pci 
device 
- Click on "add device", in the window appear all the pci devices: choose the 
pci card you wish (ex. pci__83_00_0 pci__83_00_1) and then click on the 
gray arrow to assign this device to the VM 
- Click on ok 
- boot the VM. 
The problem is that in the window that appears, there is not a single pci 
device listed (there should be many listed). 
I checked first: the IOMMU setting is set in the kernel. 

Our environment: 
We have two HV running CentOs7. 
Each of them have three fiber channel cards. First card is connected to a disk 
array, second one to the first tape library and third one to another tape 
library. 
We used to give the second card to a VM1, and the third card to another VM2. 
Both VMs ran on one HV or on the other in the past: everything was fine. 
What happened: 
Today we add to upgrade one of the HV (HV1). Both VMs ran on this HV1. We 
upgraded then restarted the HV1. 
Then I edited the second VM2 in order to remove card from HV1. Then I tried to 
add the card from HV2 to this VM2: the list of "host devices" is empty. 
I started the VM1: it works fine (I didn't change anything on it). 


-- 





Jérôme Chapelle 
C entre I nformatique N ational de l' E nseignement S upérieur 
950 rue de Saint Priest 
34 097 M ONTPELLIER Cedex 5 

Tél.04 67 14 14 14 
eMail   chape...@cines.fr 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt VM

2016-06-07 Thread Will Dennis 
Oops, missed that comment...

When I try an operation with virsh, it asks me for credentials that it doesn't 
accept...

[root@ovirt-node-03 ~]# virsh list
Please enter your authentication name: root
Please enter your password:
error: failed to connect to the hypervisor
error: no valid connection
error: authentication failed: authentication failed

I have tried both 'root' (as above) as well as my credentials I use with oVirt 
(AD auth), but neither work.

So I searched thru the vdsm logs for the VM's name, and got lines begging with 
"jsonrpc.Executor/5::DEBUG::2016-06-06 
16:45:38,287::__init__::503::jsonrpc.JsonRpcServer::(_serveRequest) Calling 
'VM.migrationCreate' in bridge with" with the JSON data thereafter... So this 
is the JSON pretty-printed:

{  
   u'guestFQDN':u'',
   u'acpiEnable':u'true',
   u'emulatedMachine':u'pc-i440fx-rhel7.2.0',
   u'afterMigrationStatus':u'',
   u'spiceSecureChannels':u'smain,
   sinputs,
   scursor,
   splayback,
   srecord,
   sdisplay,
   susbredir,
   ssmartcard',
   u'vmId':u'1a49b65b-9950-4b29-8c72-139d5263e11d',
   u'memGuaranteedSize':8192,
   u'transparentHugePages':u'true',
   u'displaySecurePort':u'5901',
   u'spiceSslCipherSuite':u'DEFAULT',
   u'cpuType':u'Penryn',
   u'smp':u'4',
   u'pauseCode':u'NOERR',
   u'migrationDest':u'libvirt',
   u'guestNumaNodes':[  
  {  
 u'nodeIndex':0,
 u'cpus':u'0,
 1,
 2,
 3 ', u' memory':u'8192'
  }
   ],
   u'smartcardEnable':u'false',
   u'numaTune':{  
  u'nodeset':u'0',
  u'mode':u'interleave'
   },
   u'custom':{  
  u'macspoof':u'true',
  
u'device_a8c2dcc6-b27b-48ed-9e22-f1e1a36423aedevice_ba4d1ef4-ce41-4b08-aacb-4172828b13c9device_2149d02d-33d4-436a-8eab-2bdfd19bdd12':
  u"VmDevice:{  
 id='VmDeviceId:{  
deviceId='2149d02d-33d4-436a-8eab-2bdfd19bdd12',
vmId='1a49b65b-9950-4b29-8c72-139d5263e11d'
 } ', device=' unix',
 type='CHANNEL',
 bootOrder='0',
 specParams=' [  

 ] ', address=' {  
bus=0,
controller=0,
type=virtio-serial,
port=2
 } ', managed=' false ', plugged=' true 
', readOnly=' false ', deviceAlias=' channel1',
 customProperties=' [  

 ] ', snapshotId=' null ', logicalName='
 null ', usingScsiReservation=' false '}", u' 
device_a8c2dcc6-b27b-48ed-9e22-f1e1a36423aedevice_ba4d1ef4-ce41-4b08-aacb-4172828b13c9device_2149d02d-33d4-436a-8eab-2bdfd19bdd12device_cd207626-438b-462d-b80e-5735ec9c1a7f':
 u"VmDevice:{  
id='VmDeviceId:{  
   deviceId='cd207626-438b-462d-b80e-5735ec9c1a7f',
   vmId='1a49b65b-9950-4b29-8c72-139d5263e11d'
}', device='spicevmc',
type='CHANNEL',
bootOrder='0',
specParams='[  

]', address='{  
   bus=0,
   controller=0,
   type=virtio-serial,
   port=3
}', managed='false', plugged='  
  true', readOnly='false', 
deviceAlias='channel2',
customProperties='[  

]', snapshotId='null', 
logicalName='null', usingScsiReservation='
false'}", u'
device_a8c2dcc6-b27b-48ed-9e22-f1e1a36423ae':u"VmDevice:{  
   id='VmDeviceId:{  
  deviceId='a8c2dcc6-b27b-48ed-9e22-f1e1a36423ae',
  vmId='1a49b65b-9950-4b29-8c72-139d5263e11d'
   }   ', device='   ide',
   type='CONTROLLER',
   bootOrder='0',
   specParams='   [  

   ]   ', address='   {  
  slot=0x01,
  bus=0x00,
  domain=0x,
  type=pci,
  function=0x1
   }   ', managed='   false   
', plugged='   true   ', readOnly='   false 
  ', deviceAlias='   ide',
   customProperties='   [  

   ]   ', snapshotId='   null   
', logicalName='   null   ', usingScsiReservation=' 
  false   '}", u'   
device_a8c2dcc6-b27b-48ed-9e22-f1e1a36423aedevice_ba4d1ef4-ce41-4b08-aacb-4172828b13c9':
   u"VmDevice:{  
  id='VmDeviceId:{  
 deviceId='ba4d1ef4-ce41-4b08-aacb-4172828b13c9',

[ovirt-users] Changing ticket duration for VMs

2016-06-07 Thread Alexis HAUSER 
Hi,


I'm looking for a way to change the duration of all tickets from all VMs. How 
can I do this ? I'd like to change it to 5 min instead of 2 min.

It seems it is possible to change these parameters using the RestAPI, with 
"action.grace_period.expiry" or "action.ticket.value"...
Anyway, these parameters seems to be accessible only using POST but not GET. 
How can you retrieve their value then, using POST ?

These parameters seem to be available for each VM, is there a way to set it for 
all VMs in general, even next VM created ? Do they work for all tickets 
created, or only one single generated ticket where you define its value ?

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] virt-in-virt problem: DHCP failing for a container in a oVirt VM

2016-06-07 Thread Yedidyah Bar David 
On Tue, Jun 7, 2016 at 12:04 AM, Will Dennis  wrote:
> Sorry, got away from this for a while attending to other work, but back at it 
> now... Anyone have any ideas on how I may further troubleshoot this issue?

Edward later asked you to post the domxml.
You can find it with 'virsh dumpxml vm' or search vdsm logs.

Best,

>
> Thanks
>
> -Original Message-
> From: Will Dennis
> Sent: Wednesday, May 18, 2016 11:39 AM
> To: 'Michal Skrivanek'; 'Yedidyah Bar David'
> Cc: 'users@ovirt.org'
> Subject: RE: [ovirt-users] virt-in-virt problem: DHCP failing for a container 
> in a oVirt VM
>
> Sadly, having set the 'macspoof' key to 'true' in Custom Properties in the VM 
> Edit dialog, then restarting the VM thereafter, I'm still not seeing the 
> container's MAC address in the relevant bridge's MAC table in oVirt, and the 
> container is failing to lease a DHCP address from the external network...
>
> Looked at the ebtables filter table, nothing there...
> [root@ovirt-node-03 ~]# ebtables -t filter -L Bridge table: filter
>
> Bridge chain: INPUT, entries: 0, policy: ACCEPT
>
> Bridge chain: FORWARD, entries: 0, policy: ACCEPT
>
> Bridge chain: OUTPUT, entries: 0, policy: ACCEPT
>
>
> Anyone know where else I could look to troubleshoot?
>



-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users