On 26 March 2017 at 19:34, Anantha Raghava
wrote:
> Hello,
>
> We are now using oVirt 4.1 in our lab with 2 hosts and a separate server for
> engine. Both hosts (Dell R710 Servers) are in a single cluster and load
> balancing & migrations work perfectly.
>
> However, if a physical server goes down
Dear Didi
> Even if you never heard about hosted-engine in previous versions and 4.1
> was your first attempt? Any suggestions for improvement to make it easier
> to find?
Sorry to late reply. I notice that I forget to add "users "
as a destination.
The inquiry of the other day was about oVirt
Hi,
Thanks. Will try this.
--
Thanks & Regards,
Anantha Raghava
Do not print this e-mail unless required. Save Paper & trees.
On 27/03/17 2:11 AM, Fred Rolland wrote:
If you don't have power management, you should check VM lease:
http://www.ovirt.org/develop/release-management/features/st
Hi,
I tried to configure the power management. But, the agent (idrac) is
failing. It is unable to contact the idrac management interface.
Any document that explains the process you can guide me to?
--
Thanks & Regards,
Anantha Raghava
Do not print this e-mail unless required. Save Paper &
Hi Guys,
I have upgraded from 4.0.6 to 4.1.1 and I see now that my storage is
now shown in the overview tab when you do Datacenter>Storage, but they
are shown under the Storage Tab of the domain.
System>Storage shows them as well, also the dropdown in "Add Disk" shows them.
What went wrong ?
Th
But on the Dell MD32x00 you have got two controllers. The trick is that you
have to sustain link to both controllers, so the best option is to use
multipath as Yaniv said. Otherwise you get an error notifications from the
array.
The problem is with iSCSI target.
After server reboot, VDSM tries to c
If you don't have power management, you should check VM lease:
http://www.ovirt.org/develop/release-management/features/storage/vm-leases/
https://youtu.be/WLnU_YsHWtU
On Mar 26, 2017 11:28 PM, "Luca 'remix_tj' Lorenzetto" <
lorenzetto.l...@gmail.com> wrote:
>
>
> Il 26 mar 2017 6:34 PM, "Anant
Il 26 mar 2017 6:34 PM, "Anantha Raghava"
ha scritto:
Hello,
We are now using oVirt 4.1 in our lab with 2 hosts and a separate server
for engine. Both hosts (Dell R710 Servers) are in a single cluster and load
balancing & migrations work perfectly.
However, if a physical server goes down, the V
ovirt-node-ng-installer-ovirt-3.6-2016052403 this is the version of the
installer that i am using , can anyone confirm then which version of Ovirt
(Both Node and Engine) are equivalent to which RHEV equivalentsi am
studying for RHCVA and thought ovirtNode 3.6 and 4.0 would work
On Sun, Mar 26,
Il 24/Mar/2017 09:32, "martin chamambo" ha scritto:
Good day
I am using ovirtEngine 4.0 and ovirtnode 4.0 on the same engine i also
need to test ovirtNode 3.6 since its supported.
Please note 3.6 and 4.0 have both reached end of life and current supported
version is 4.1.
Also in 3.6 oVi
Have you marked the Virtual Machine as “highly available?” Under the “highly
availability tab” under Advanced Options while editing the VM?
Devin
On Mar 26, 2017, 9:34 AM -0700, Anantha Raghava
, wrote:
> Hello,
> We are now using oVirt 4.1 in our lab with 2 hosts and a separate server for
>
@Yaniv , OvirtNode 4.0 is working flawlessly , and the issue is with DISK
partitioning and VMware exposes the same drivers as with ovirtNode 4.0
changing to thin LVM ddnt work either..
FYI - i am currently using ovirtNode 4.0 and OvirtEngine 4.0 and its working
On Sun, Mar 26, 2017 at 4:
Hello,
We are now using oVirt 4.1 in our lab with 2 hosts and a separate server
for engine. Both hosts (Dell R710 Servers) are in a single cluster and
load balancing & migrations work perfectly.
However, if a physical server goes down, the VMs running on that server,
gets paused ans status g
Hi,
When I create vm after I have installed ovirt Node 4.1.1 successfully,
I got this error message "The host did not satisfy internal
filter Memory because its available memory is too low".
I use ovirt node:ovirt-node-ng-installer-ovirt-4.1-2017032304.iso and
ovirt-engine-appliance-4.1-2017
On Fri, Mar 24, 2017 at 11:31 AM, martin chamambo
wrote:
> Good day
>
> I am using ovirtEngine 4.0 and ovirtnode 4.0 on the same engine i
> also need to test ovirtNode 3.6 since its supported.
>
> Initially i struggled with installing ovirt engine 4.0 until i selected
> LVM thin provisionin
On Fri, Mar 24, 2017 at 1:29 PM, Ernest Beinrohr wrote:
> On 24.03.2017 11:11, gflwqs gflwqs wrote:
>
> Hi list,
> I need to move 600+ vms:from one data domain to another, however from what
> i can see in the GUI i can only move one vm disk at the time which would be
> very time consuming.
>
> I
On Thu, Mar 23, 2017 at 4:19 PM, Tomislav Kulušić
wrote:
> Hello, my name is Tomislav Kulusic and I am coming from Split Croatia.
> Right now I am a second year student at Rochester Institute Of Technology
> Croatia enrolled on Web and Mobile Computing major. I would like to know
> more about you
On Sun, Mar 26, 2017 at 10:57 AM, Berger, Sandy wrote:
> Thanks. That worked. However, now when I try to use that user from a remote
> system I am getting this error. I’m not sure what I need to add to the
> pg_hba.conf file or what I need to do after editing it.
>
>
>
> Credential validation was
Thanks. That worked. However, now when I try to use that user from a remote
system I am getting this error. I’m not sure what I need to add to the
pg_hba.conf file or what I need to do after editing it.
Credential validation was not successful: no pg_hba.conf entry for host
"ip_address", user
On Sat, Mar 25, 2017 at 9:20 AM, Charles Tassell wrote:
> Hi Everyone,
>
> I'm about to setup an oVirt cluster with two hosts hitting a Linux
> storage server. Since the Linux box can provide the storage in pretty much
> any form, I'm wondering which option is "best." Our primary focus is on
>
On Thu, Mar 23, 2017 at 5:33 PM, Endre Karlson
wrote:
> Yeah i tried that with ubuntu but it looks to just fail whebmn it starts
> the vm because it tries to contact the metadata api instead of using the
> cdrom source
>
Can you share vdsm logs, to ensure the CloudInit payload (in the CDROM) has
21 matches
Mail list logo