On 4/10/2017 6:59 AM, Charles Tassell wrote:
Ah, spoke to soon. 30 seconds later the network went down with IPv6
disabled. So it does appear to be a host forwarding problem, not a VM
problem. I have an oVirt 4.0 cluster on the same network that doesn't
have these issues, so it must be a
I will use Unity 400 with oVirt in next week with FC SAN.
Em Seg, 10 de abr de 2017 09:27, Colin Coe escreveu:
> Hi all
> We are contemplating moving away from our current iSCSI SAN to Dell/EMC
> Unity 300.
> I've seen one thread where the 300F is problematic and
On 04/10/2017 05:38 PM, Giorgio Biacchi wrote:
> I'm taking over Giulio because he's not at work now. I'm starting to
> understand what's happening because we have not that users (and many
> others) in the users tab in the admin portal.
> We have heavily modified the paradigm of ovirt, VM
I'm taking over Giulio because he's not at work now. I'm starting to understand
what's happening because we have not that users (and many others) in the users
tab in the admin portal.
We have heavily modified the paradigm of ovirt, VM are bound to thin clients and
not to users, this
On Tue, 2017-04-04 at 12:59 +0200, Giulio Casella wrote:
> I'm evaluating some thin client to connect to ovirt VMs, used as
> I really don't care about native client support, I distribute via PXE
> custom linux OS launching remote viewer.
Hey Eric -
It's possible that there are some silent denials in some policy. Can you
please try "semodule -DB" to see if anything pops up?
I'll also try to reproduce this...
On Mon, Apr 10, 2017 at 5:11 AM, eric stam wrote:
> We are on the good way.
> I first put SELinux in
RHCVA should be on 3.6 but the concepts around ovirt and rhev are the
same..i also tried ovirt-node-3.6 on workstation and it did not work
(issue around Partitions)I am using ovirt node 4.1 and engine 4.1
because i first need to understand the basics.Once you understand
On Sun, Mar 26, 2017 at 9:28 PM, martin chamambo
> ovirt-node-ng-installer-ovirt-3.6-2016052403 this is the version of the
> installer that i am using , can anyone confirm then which version of Ovirt
> (Both Node and Engine) are equivalent to which RHEV
On Mon, Apr 10, 2017 at 2:11 PM, eric stam wrote:
> We are on the good way.
> I first put SELinux in permissive mode, and now it is possible to start
> virtual machine's.
> I will test the "restorecon" next.
the strange thing here is that the sosreport Eric provided showed
Yes, this is what struck me about your situation. Will you be able to find
relevant logs regarding multipath configuration, in which we would see when
(or even why) the third connection was created on the first node, and only
one connection on the second?
On Mon, Apr 10, 2017 at 2:17 PM, Gianluca
We are contemplating moving away from our current iSCSI SAN to Dell/EMC
I've seen one thread where the 300F is problematic and no resolution is
Is anyone else using tis with RHEV/oVirt? Any war stories?
On Mon, Apr 10, 2017 at 2:12 PM, Ondrej Svoboda wrote:
> I can see that the workaround you describe here (to complete multipath
> configuration in CLI) fixes an inconsistency in observed iSCSI sessions. I
> think it is a shortcoming in oVirt that you had to
I can see that the workaround you describe here (to complete multipath
configuration in CLI) fixes an inconsistency in observed iSCSI sessions. I
think it is a shortcoming in oVirt that you had to resort to manual
configuration. Could you file a bug about this? Ideally, following the
restorecon on virtlogd.conf would be enough
On Apr 10, 2017 2:51 PM, "Misak Khachatryan" wrote:
> Is it node setup? Today i tried to upgrade my one node cluster, after that
> VM's fail to start, it turns out that selinux prevents virtlogd to start.
> ausearch -c 'virtlogd'
Is it node setup? Today i tried to upgrade my one node cluster, after that
VM's fail to start, it turns out that selinux prevents virtlogd to start.
ausearch -c 'virtlogd' --raw | audit2allow -M my-virtlogd
semodule -i my-virtlogd.pp
/sbin/restorecon -v /etc/libvirt/virtlogd.conf
On Sat, Apr 8, 2017 at 3:15 AM, shubham dubey wrote:
> did I need to install it on the ovirt-engine machine?
I would suggest to read our Installation Guide at
I think it will help you getting a proper
On 04/10/2017 11:10 AM, Giulio Casella wrote:
> On 07/04/2017 16:00, Juan Hernández wrote:
>> I have been trying to reproduce this and I wasn't able. In theory the
>> 404 error that you get should only happen if the virtual machine doesn't
>> exist, but that isn't the case.
>> Can you check the
Just an update, I installed a new Ubuntu guest VM and it was doing
the same thing regarding the network going down, then I disabled IPv6
and it's been fine for the past 10-15 minutes. So the issue seems to be
IPv6 related, and I don't need IPv6 so I can just turn it off. The
Thanks for the help, answers below.
On 2017-04-10 05:27 AM, Sandro Bonazzola wrote:
Adding Simone and Martin, replying inline.
On Mon, Apr 10, 2017 at 10:16 AM, Ondrej Svoboda > wrote:
First, can you
Can you please provide a full sos report from that host?
On Sun, Apr 9, 2017 at 8:38 PM, Sandro Bonazzola
> Adding node team.
> Il 09/Apr/2017 15:43, "eric stam" ha scritto:
> Yesterday I executed an upgrade on my hypervisor to version 184.108.40.206
On 07/04/2017 16:00, Juan Hernández wrote:
I have been trying to reproduce this and I wasn't able. In theory the
404 error that you get should only happen if the virtual machine doesn't
exist, but that isn't the case.
Can you check the server.log file and share the complete stack traces
we are working on that, we can only ask for patience now, Jenny was trying
to find out what happened and how to fix it all week.
SLA / oVirt
On Mon, Apr 10, 2017 at 9:38 AM, Rafał Wojciechowski <
> I have similiar
Adding Simone and Martin, replying inline.
On Mon, Apr 10, 2017 at 10:16 AM, Ondrej Svoboda
> Hello Charles,
> First, can you give us more information regarding the duplicated IPv6
> addresses? Since you are going to reinstall the hosted engine, could you
On 04/07/2017 12:06 PM, TranceWorldLogic . wrote:
> I was trying to deactivate host via python SDK but found that host is
> not moving in Maintenance State.
> In this scenario, I found that I have one additional network added in
> cluster but not setup on Host.
> Hence it retrying in
First, can you give us more information regarding the duplicated IPv6
addresses? Since you are going to reinstall the hosted engine, could you
make sure that NetworkManager is disabled before adding the second vNIC
(and perhaps even disable IPv6 and reboot as well, so we have a
I have similiar issue(I also started my mailthread) after upgrade 4.0 to 4.1
Version 220.127.116.11-1.el7.centos (before it was some 4.1.0.x or similiar -
update not fixed it)
to run VM I have to set in Console tab Headless mode - without it I got
libvirtd segfault(logs attached in my
Okay, I'm again having problems with getting basic networking setup
with oVirt 4.1 Here is my situation. I have two servers I want to use
to create an oVirt cluster, with two different networks. My "public"
network is a 1G link on device em1 connected to my Internet feed,
After updating to oVirt 4.1.1 Async release i can confirm that the
problem still persists.
On 03/25/2017 12:25 PM, Arsène Gschwind wrote:
After updating to 4.1.1 i'm observing the same behavior, HE without
Even when trying to edit the HE VMs it doesn't
Mail list logo