Fernando,
The issue can be triggered by a packet with the same source MAC address as VM
has. If it’s received by network equipment from some different port, your VM
could stop receiving network traffic.
There are two options. Either there is a network topology issue, or there is
another VM wit
Hello,
As someone may know I’m learning my way through oVirt. During the configuration
of the my production oVirt pool I’ve created a new datacenter and a cluster to
put my hosts and deleted the default one.
But now I don’t know what to do. I can’t add one of my machines to the new
datacenter
Thanks Arik,
It is working.
On Wed, Jul 12, 2017 at 6:47 PM, Arik Hadas wrote:
>
>
> On Wed, Jul 12, 2017 at 4:05 PM, TranceWorldLogic . <
> tranceworldlo...@gmail.com> wrote:
>
>> Hi,
>>
>> I want to retry VM start procedure.
>> Is this variable use for same ? because as per name it look to me
I am using the latest release of oVIRT 4.1.3, and I am connecting a Dell
Compelent SAN that has 2 fault domains each on a separate VLAN that I have
attached to oVIRT. From what I understand I am suppose to go into “iSCSI
Multipathing” option and add a BOND of the iSCSI interfaces. I have done
this
Hi,
I've had same problem with at least two or three releases. If you need i can
provide some details, but my setup is also pretty much standard without any
custom partitioning.
Best regards,
Misak Khachatryan,
Network Administration and
Monitoring Department Manager,
GNC- ALFA CJSC
1 Khaghag
We are running a fresh install of oVIRT 4.1.3, using ISCSI, the VM in
question has multiple Disks (4 to be exact). It snapshotted OK while on
iSCSI however when I went to delete the single snapshot that existed it
went into Locked state and never came back. The deletion has been going for
well over
Hello Pavel
What you mean by another oVirt instance ? In one Datacenter it has 2
different clusters (or Datacenter in oVirt way of orrganizing things),
but in the other Datacenter the oVirt Node is standlone.
Let me know.
Fernando
On 12/07/2017 16:49, Pavel Gashev wrote:
Fernando,
It lo
Fernando,
It looks like you have another oVirt instance in the same network segment(s).
Don’t you?
From: on behalf of FERNANDO FREDIANI
Date: Wednesday, 12 July 2017 at 16:21
To: "users@ovirt.org"
Subject: [ovirt-users] Bizzare oVirt network problem
Hello.
I am facing a pretty bizzare pro
I have a qcow2 disk image sitting on the local filesystem of one node.
Is there a way to copy this image to oVirt (into an iSCSI storage
domain) without copying it to my desktop and uploading through the web
UI?
--
Chris Adams
___
Users mailing list
Us
hi,
i'm using a KVM system that creates it's disks in raw format as LVM
logical volumes. there's one VG with one LV per disk. the physical
devices for these LVM entities are iSCSI devices. now my idea was to use
these disks directly in oVirt as "Direct LUN". i did the following:
- stopped th
In the mean time I have verified that the problem is with
emulatedMachine=pc-i440fx-rhel7.3.0
Summarizing:
default boot ofengine VM after update to 4.1.3 is with cpuType=Broadwell
and emulatedMachine=pc-i440fx-rhel7.3.0 and the engine vm hangs at "Booting
from Hard Disk " screen
When starting w
Hello.
I am facing a pretty bizzare problem in two of my Nodes running oVirt. A
given VM running a few hundred Mbps of traffic simply stops passing
traffic and only recovers after a reboot. Checking the bridge with
'brctl showmacs BRIDGE' I see the VM's MAC address missing during this
event.
On Wed, Jul 12, 2017 at 4:05 PM, TranceWorldLogic . <
tranceworldlo...@gmail.com> wrote:
> Hi,
>
> I want to retry VM start procedure.
> Is this variable use for same ? because as per name it look to me it will
> try to do fencing if it fail.
>
So in that case the configuration value that you loo
Hi,
I want to retry VM start procedure.
Is this variable use for same ? because as per name it look to me it will
try to do fencing if it fail.
Thanks,
~Rohit
On Wed, Jul 12, 2017 at 3:21 PM, Eli Mesika wrote:
> Hi
>
> You have the following configuration parameters :
>
> FenceStartStatusRetri
> On 11 Jul 2017, at 10:09, Abi Askushi wrote:
>
> Hi All,
>
> Finally I was able to pin-point the issue.
> Just in case ones needs this.
>
>
> ovirt by default enables USB 1.0 controller.
> To enable USB 2.0 controller go to
>
> At ovirt engine at config file below, change the controlle
On Wed, Jul 12, 2017 at 12:16 PM, Yedidyah Bar David
wrote:
>
> >> >
> >> > the modified file would be such that:
> >> >
> >> > [root@ovirt02 images]# diff /var/run/ovirt-hosted-engine-ha/vm.conf
> >> > /root/alternate_vm.conf
> >> > 1,2c1,2
> >> > < cpuType=Broadwell
> >> > < emulatedMachine=pc-
On Mon, Jul 10, 2017 at 6:42 PM, Gianluca Cecchi
wrote:
> On Mon, Jul 10, 2017 at 4:38 PM, Yedidyah Bar David wrote:
>>
>>
>> >
>> > Currently I have set the environment in global maintenance.
>> > Does it make sense to try to start the HostedEngine with an alternate
>> > vm.conf to crosscheck it
Hi
You have the following configuration parameters :
FenceStartStatusRetries (default 10)
FenceStartStatusDelayBetweenRetriesInSec (default 18 sec)
FenceStopStatusRetries(default 10)
FenceStopStatusDelayBetweenRetriesInSec(default 18 sec)
You can use the engine-config utility to change any of
Hi,
there was a detailed overview with examples in a deep dive we did for oVirt 3.3:
http://resources.ovirt.org/old-site-files/wiki/Scheduler-Deep-Dive-oVirt.pdf
most of it should still be valid, but it is possible that some minor
changes happened since then.
Best regards
Martin Sivak
SLA / oV
Hi,
Can some one point me to some document or tutorial for external Scheduling
policy ?
I want to understand this feature "external scheduling policy" but not got
any idea how to implement that.
Please point me some document [best will be tutorial or sample code].
Thanks,
~Rohit
Hi,
I have created HA VM with priority as High.
And then I block host network connection using firewall rule as shown below.
e.g.
iptables -I INPUT -j DROP; iptables -I OUTPUT -j DROP;
As expected ovirt had call fencing to power off host and power on it again.
At backgroud ovirt tried 10 time to
On 07/12/2017 01:43 PM, Simone Marchioni wrote:
Il 11/07/2017 11:23, knarra ha scritto:
On 07/11/2017 01:32 PM, Simone Marchioni wrote:
Il 11/07/2017 07:59, knarra ha scritto:
Hi,
removed partition signatures with wipefs and run deploy again: this
time the creation of VG and LV worked correc
Il 11/07/2017 11:23, knarra ha scritto:
On 07/11/2017 01:32 PM, Simone Marchioni wrote:
Il 11/07/2017 07:59, knarra ha scritto:
Hi,
removed partition signatures with wipefs and run deploy again: this
time the creation of VG and LV worked correctly. The deployment
proceeded until some new err
23 matches
Mail list logo
