Hi,
We attempted to import a VM from export domain and that failed for some
reason. However the import task or the activity never ended in spite of
throwing an error. Even after 4 full days, on the VM an Hour glass was
shown and it kept reporting, hung task.
Finally we had to run engine-upda
Thank you very much, Simone!
Regards
Alex
>Вторник, 3 октября 2017, 19:21 +03:00 от Simone Tiraboschi
>:
>
>
>
>On Tue, Oct 3, 2017 at 2:53 PM, Alexander Vrublevskiy < or...@mail.ru > wrote:
>>Hello Community!
>>
>>I'm looking for information about Hosted Engine backup and restore
>>procedur
On Tue, Oct 3, 2017 at 2:53 PM, Alexander Vrublevskiy wrote:
> Hello Community!
>
> I'm looking for information about Hosted Engine backup and restore
> procedures. There's HE how-to which refers to oVirt Hosted Engine Backup
> and Restore guide:
>
> https://www.ovirt.org/documentation/how-to/hos
Does this report an error on the host where you are having problems
activating logical volumes?
lvs -a -o +devices
Also, do the lvm commands succeed when you explicitly disable lvmetad, ie...
lvchange --config 'global {use_lvmetad=0}' -ay ...
On Wed, Sep 20, 2017 at 3:38 AM, Nicolas Eca
Shubham,
I hope you’re going to keep the Export feature at least as “Clone to another
storage domain”. In the real life, the copy-in/copy-out is required for
backups. Moving disks between Data SD and Backup SD is not a way to backup or
restore. It’s often required to keep VM runnable during bac
On Tue, Oct 3, 2017 at 4:05 PM, Marcin Mirecki wrote:
> Hello Gianluca,
>
> Please check on the engine what hosts are registered on ovn-north:
> #ovn-sbctl show
>
> For each registered host you should see something like:
>Chassis "69b6b2a6-5afb-4908-8d66-c648cbe09ba8"
>hostname: "f43"
Hello Gianluca,
Please check on the engine what hosts are registered on ovn-north:
#ovn-sbctl show
For each registered host you should see something like:
Chassis "69b6b2a6-5afb-4908-8d66-c648cbe09ba8"
hostname: "f43"
Encap geneve
ip: "192.168.120.43"
Hello Community!
I'm looking for information about Hosted Engine backup and restore procedures.
There's HE how-to which refers to oVirt Hosted Engine Backup and Restore guide:
https://www.ovirt.org/documentation/how-to/hosted-engine/#hosted-engine-backup-and-restore
but the link leads to 404
Hello,
I previously had OVN running on engine (as OVN provider with northd and
northbound and southbound DBs) and hosts (with OVN controller).
After changing mgmt ip of hosts (engine has retained instead the same ip),
I executed again on them the command:
vdsm-tool ovn-config
Now I think I hav
Hi,
Yes, I have (well, wireshark, but effectively the same thing).
Nothing is standing out.
I'm trying to visually coordinate the wireshark traces with my mtr run to
try to see "what's going on when my RTTs skyrocket". Honestly the only
correlation I'm seeing is that it's when the ovirt host is
On Tue, Oct 3, 2017 at 1:49 PM, Gianluca Cecchi
wrote:
> On Tue, Oct 3, 2017 at 11:36 AM, Yedidyah Bar David wrote:
>>
>>
>>
>> I think it should be safe to manually edit /etc/sysconfig/iptables
>> in that case.
>>
>> Of course, verify on a test system.
>>
>> Also, you might be happy to know that
A quick check of the host shows STP=off in ifcfg-ovirtmgmt. I see nothing
about STP elsewhere in the configuration on the host.
-derek
Sent using my mobile device. Please excuse any typos.
On October 3, 2017 7:15:35 AM Colin Coe wrote:
Spanning Tree Protocol.
Make sure the /etc/sysconfig
Derek,
Have you used tcpdump to check what network traffic is coming out of your
box? Is it possible that it is some kind of DoS attack from outside in or
that your VM was compromised and is attacking other external hosts?
Hope you get to the bottom of it!
Jason.
Sent with AquaMail for Androi
On 10/03/2017 03:08 AM, Luca 'remix_tj' Lorenzetto wrote:
> On Mon, Oct 2, 2017 at 11:49 PM, ~Stack~ wrote:
>> Greetings,
>>
>> For various reasons I have multiple networks that I am required to work
>> with. I just want to ensure that I've understood the documentation for
>> setting up Ovirt corr
On the host or in the guests?
-derek
Sent using my mobile device. Please excuse any typos.
On October 3, 2017 7:15:35 AM Colin Coe wrote:
Spanning Tree Protocol.
Make sure the /etc/sysconfig/network-scripts/ifcfg-eth0 (or whatever) does
not have an STP=yes line.
CC
On 3 Oct. 2017 19:11,
Spanning Tree Protocol.
Make sure the /etc/sysconfig/network-scripts/ifcfg-eth0 (or whatever) does
not have an STP=yes line.
CC
On 3 Oct. 2017 19:11, "Derek Atkins" wrote:
> I'm sorry. What is STP?
> And how do I turn that off?
>
> -derek
> Sent using my mobile device. Please excuse any typos.
Do you mean spanning tree protocol?
I'm not sure how that could cross a router boundary, but it is something to
look into..
-derek
Sent using my mobile device. Please excuse any typos.
On October 3, 2017 7:12:00 AM Derek Atkins wrote:
I'm sorry. What is STP?
And how do I turn that off?
-
I'm sorry. What is STP?
And how do I turn that off?
-derek
Sent using my mobile device. Please excuse any typos.
On October 2, 2017 7:41:15 PM Colin Coe wrote:
Hi
We saw something very similar to this a couple of years ago. In our case,
it was caused by STP being enabled on our hypervisor
On Tue, Oct 3, 2017 at 11:36 AM, Yedidyah Bar David wrote:
>
>
> I think it should be safe to manually edit /etc/sysconfig/iptables
> in that case.
>
> Of course, verify on a test system.
>
> Also, you might be happy to know that in 4.2 we'll support firewalld,
> which is much nicer to work with
On Tue, Oct 3, 2017 at 11:51 AM, Gianluca Cecchi
wrote:
> Hello,
> I have read this interesting blog post
> https://www.ovirt.org/blog/2016/12/extension-iptables-rules-oVirt-hosts/
>
> In my case, to allow incoming connections from Nagios server to connect to
> Nagios nrpe daemon installed on host
Hello,
I have read this interesting blog post
https://www.ovirt.org/blog/2016/12/extension-iptables-rules-oVirt-hosts/
In my case, to allow incoming connections from Nagios server to connect to
Nagios nrpe daemon installed on hosts I have run
[root@ovmgr1 ~]# engine-config --set IPTablesConfigSit
Dear Charles,
Thank you for your reply.
I don't want to make an another storage domain, I just want to do a
detach-attach procedure with the existing.
Also, I have an another question. Is it possible delete snapshots in 4.1 what
were created in 3.5? How is safe this?
I have some vm snapshot
On Mon, Oct 2, 2017 at 11:49 PM, ~Stack~ wrote:
> Greetings,
>
> For various reasons I have multiple networks that I am required to work
> with. I just want to ensure that I've understood the documentation for
> setting up Ovirt correctly.
>
> - First is my BMC/ilo network. The security team wants
23 matches
Mail list logo
