On Wed, Nov 15, 2017 at 1:52 PM, Petr Horacek wrote:
> Hello Bryan,
> I'm afraid it is not possible with oVirt. You can only attach NICs to a
> bonding via the way Arthur suggested.
> 2017-11-09 16:41 GMT+02:00 Bryan Sockel :
I don't mean on the fly upgrade, just confused that i should stop all
VMs at once, as i understood procedure. If it's possible to do per VM,
it's perfectly OK for me.
Thank you Nir for clarification.
On Thu, Nov 16, 2017 at 2:05 AM, Nir Soffer
I forgot to add:
The file /var/run/ovirt-hosted-engine-ha/vm.conf doesn't exist:
[root@virt1 ~]# ll /var/run/ovirt-hosted-engine-ha/vm.conf
ls: cannot access /var/run/ovirt-hosted-engine-ha/vm.conf: No such file or
[root@virt1 ~]# ll /var/run/ovirt-hosted-engine-ha/
I wonder if someone can help. After a system reboot, the Hosted-Agent isn't
running. This is on a fresh installaion CentOS Linux release 7.4.1708
running ovirt-release41-4.1.7-1.el7.centos.noarch. Gluster is setup on 3
nodes, but hosted-engine is only setup on the 1st node for now.
I installed hosted-engine on a VM but failed to see the VNC password due to
power failure. The hosted-engine VM is running now, but I don't know where
to see or change the VNC password. Can someone please tell me where to
On Wed, Nov 15, 2017 at 8:58 AM Misak Khachatryan wrote:
> will it be a more clean approach? I can't tolerate full stop of all
> VMs just to enable it, seems too disastrous for real production
> environment. Will it be some migration mechanisms in future?
I do not think we will be supporting any in the near future. Enabling
gfapi means that access mechanism of drive changes and i think we will need
to stop the vms.
On Wed, Nov 15, 2017 at 12:27 PM, Misak Khachatryan
> will it be a
Removing a brick from a replica 3 volume means that you are
reducing the replica count from 3 to 2. You are seeing the first error
because when you are trying to remove a brick from replica 3 volume you do
not need to migrate data as the same data is present in other two
bug created: https://bugzilla.redhat.com/show_bug.cgi?id=1513596
Il 15/11/2017 15:30 Benny Zlotnik ha scritto:
This looks like a bug. Can you please file a report with the steps and
full logs on https://bugzilla.redhat.com?
From looking at the logs it looks
This looks like a bug. Can you please file a report with the steps and full
logs on https://bugzilla.redhat.com?
>From looking at the logs it looks like its related to the user field being
On Wed, Nov 15, 2017 at 1:40 PM, wrote:
> I'm trying to connect a
The oVirt Project is pleased to announce the availability of the Second
Beta Release of oVirt 4.2.0, as of November 15th, 2017
This is pre-release software. This pre-release should not to be used in
Please take a look at our community page to learn how to ask questions
I removed CHAP once I started running into issues. I did restart services,
host, and vm.
I ended up blowing the configuration away today as I have a deadline to meet,
so I'll be continuing to use Virt-Manager for now.
I'll be using a test box of mine to work out the kinks of this and will
Ok Thanks, for some reason i was thinking it was the other way around.
From: Kasturi Narra
To: Bryan Sockel
Cc: Alessandro De Salvo , users
Date: Wed, 15 Nov
I’ve been handed an ovirt setup from a previous admin that has resigned from
the company. It was setup more as a test bed and not a final solution.
Storage is being mounted over NFS from local drives contained on one of the
I’ve been seeing alerts about one particular host’s nic
I'm trying to connect a new oVirt Engine Version: 220.127.116.11-1.el7.centos
to a Dell MD3200i SAN.
I can discover the SAN from the storage new domain window but when I
login, instead of seeing the + symbol I get the "Could not retrieve
LUNs, please check your storage" error message.
Not sure if I can help with this one, but could you just clarify from where
these DHCPv6 packets arrive?
You mentioned IPv6 is disabled on the VM, therefore I assume these are
ingress packets, right?
If this is the case, then perhaps the stack just drops the ingress packets
I know, have been using Linux since 2000 and redoing the network isn't
difficult, but in this case something didn't work well.
Right now I'm stuck with a degraded Gluster setup after the reinstallation
for which I have posted another thread.
On Wed, Nov 15, 2017 at 1:58 PM, Petr Horacek
Manual change of ifcfg files and restart of network service (not reboot)
should restore connectivity. Then you should be able to access Engine and
setup the new network there so it will be persisted and recognized by oVirt.
Glad you managed to run it.
2017-11-15 13:45 GMT+02:00 Rudi Ahlers
I'm afraid it is not possible with oVirt. You can only attach NICs to a
bonding via the way Arthur suggested.
2017-11-09 16:41 GMT+02:00 Bryan Sockel :
> I have a similar setup i am trying to achieve, but i would like to create
> 2 bonds to
Thanx for getting back to me.
I ended up reinstalling the server. Even after I manually edited the
ifcg-ens2f0 and ens2f3 files, and rebooted, networking didn't work well.
The gateway was never added (even though it was listed in the files) and
the /etc/resolv.conf file kept on being
I am trying to remove a brick, from a server which is no longer part of the
gluster pool, but I keep running into errors for which I cannot find
answers on google.
[root@virt2 ~]# gluster peer status
Number of Peers: 3
State: Peer in
could you please share your current configuration from
2017-11-14 23:56 GMT+02:00 Rudi Ahlers :
> Can someone please help me "move" the network bridge to
when no VLAN tag is specified for an oVirt network it works as a trunk for
all tagged and non-tagged traffic.
2017-11-13 9:39 GMT+02:00 Magnus Isaksson :
> In VMware you create a vlan and for tag you choose "all" or 4095.
> What is the
On Wed, Nov 15, 2017 at 9:03 AM, Magnus Isaksson wrote:
> I have tried googling and searching in the documentation, but i can't seem
> to find any instructions on how to remove a authentication source.
> The background is that i did set up an FreeIPA
On Tue, Nov 14, 2017 at 3:12 PM, Kyle Conti
> I'm brand new to Ovirt and trying to get my Hosted Engine setup configured
> with ISCSI storage. I have ~8TB usable storage available on an LVM
> partition. This storage is on the same server that is
I have tried googling and searching in the documentation, but i can't
seem to find any instructions on how to remove a authentication source.
The background is that i did set up an FreeIPA server for auth, worked
perfectly, but i ran into some problems using that to auth other
Mail list logo