[ovirt-users] Re: Mailing-Lists upgrade

2018-05-07 Thread Duck
I forgot to cross-post to other lists. Please read announcement below.

On 05/08/2018 12:45 PM, Marc Dequènes (Duck) wrote:
> Quack,
> 
> On 04/28/2018 09:34 AM, Marc Dequènes (Duck) wrote:
> 
>> A few months ago we had to rollback the migration because of a nasty
>> bug. This is fixed in recent versions of Mailman 3 so we're rescheduling
>> it on Tuesday 8th during the slot 11:00-12:00 JST.
> 
> Just a word to say the migration happened and no problem was detected.
> 
> The archive posts reindexation is not finished yet, and greylisting is
> slowing down things a bit, but it should soon be over. Some information
> like post count and little graphs in the web UI are handled via regular
> cron jobs and should also soon be accurate.
> 
> Old links to the archives, for pre-migration posts, are still working.
> Posts URLS were not stable in Mailman 2 but been synced in
> https://lists.ovirt.org/pipermail/
> 
> You can contact me directly by mail or IRC, or open a JIRA ticket if you
> hit any problem.
> 
> \_o<
> 



signature.asc
Description: OpenPGP digital signature
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Clint Boggio
You should query the network to team for sure.

You should also use use the ping command (from the VM) to troubleshoot possible 
MTU problems getting to your infrastructure DNS servers and gateway.

# ping -M do -s 1472 xxx.xxx.xxx.xxx

Starting at 1472 and “walking” the -s up and down will help you determine your 
situation.

If at all possible, you could take the production switches and gateway out of 
the equation with your own isolated gear.

> On May 7, 2018, at 5:45 PM, Rue, Randy  wrote:
> 
> Looks like the physical interface on the host and the virtual interface on 
> the VM are both at the default 1500 MTU.
> 
> How can I determine the MTU setting for the physical switches without admin 
> access to them? Or do I need to ask the network team?
> 
> 
> 
>> On 5/7/2018 2:03 PM, Clint Boggio wrote:
>> Randy this flaky layer two problem reeks of a possible MTU situation between 
>> your oVirt switches and your physical switches.
>> 
>>> On May 7, 2018, at 3:59 PM, Dominik Holler  wrote:
>>> 
>>> On Mon, 7 May 2018 11:43:51 -0700
>>> "Rue, Randy"  wrote:
>>> 
 I've sort of had some progress. On Friday I went to the dentist and
 when I returned, my VM could ping google.
 
 I don't believe I changed anything Friday morning but I confess I've
 been flailing on this for so long I'm not keeping detailed notes on
 what I change. And as I'm evaluating oVirt as a possible replacement
 for our production xencenter/xenserver systems, I need to know what
 was wrong and what fixed it.
 
 I reinstalled the ovirt-engine box and two hosts and started again.
 The only change I've made beyond the default is to remove the
 no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are
 no filters applied. At this point I'm back to an ubuntu LTS server VM
 that again, is getting a DHCP IP address, nameserver entries in
 resolv.conf, and "route" shows correct local routing for addresses on
 the same subnet and the correct gateway for the rest of the world.
 The VM is even registering its hostname in our DNS correctly. And I
 can ping the static IP of the host the VM is on, but not the subnet
 gateway or anything in the real world.
 
>>> Can you ping the DHCP server?
>>> 
 Two things I haven't mentioned that I haven't seen anything in the
 docs about. My ovirt-engine box is on a different subnet than my
 hosts, and my hosts are using a bonded pair of physical interfaces
 (XOR mode) for their single LAN connection.
>>> Was the bond created before adding the hosts to oVirt, or after adding
>>> the hosts via oVirt web UI?
>>> If the switch requires configuration for the bond, is this applied?
>>> Can you check if the VM can ping the getaway, if you use a simple
>>> Ethernet connection instead of the bond?
>>> 
 Did I miss something in the docs where these are a problem?
 
 Dominik, to answer your thoughts earlier:
 
 * name resolution isn't happening at all, the VM can't reach a DNS
 server
 
 * I don't manage the data center network gear but am pretty sure
 there's no configuration that blocks traffic. This is supported by my
 temporary success on Friday. And we also have other virtualization
 hosts (VMWare hosts) in the same subnet, that forward traffic to/from
 their VMs just fine.
 
>>> OK, L3 seems to work now sometimes.
>>> 
 * tcpdump on the host's ovirtmgmt interface is pretty noisy but if I
 grep for the ubuntu DDNS name I see a slew of ARP requests. I can see
 pings to the host's IP address, and attempts to SSH from the VM to
 its host. Any attempt to touch anything past the host shows nothing
 on any interface in tcpdump, not a ping to the subnet gateway, not an
 SSH attempt, not a DNS query or a ping to known IP address.
 
>>> The outgoing ARP requests looks like the traffic of the VM is forwarded
>>> to ovirtmgmt.
>>> Do you see ARP reply to the VM?
>>> Maybe the VM fails to get the MAC address of the gateway.
>>> 
 * hot damn, here's a clue! I can ping other oVirt hosts! (by IP only)
 I also tried pinging the ovirt-engine box, wasn't surprised when that
 failed as the VM would need to reach the gateway to get to the
 different subnet.
 
 So it appears that even though I've set up the ovirtmgmt network
 using defaults, and it has the "VM Network" option checked, my
 logical network is still set to only allow traffic between the VMs
 and hosts.
 
 What am I missing?
 
 -randy
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> 
> 
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Rue, Randy
I installed the ovirt node to standalone interfaces, then created the 
bond via the ovirt-node webui at port 9090, before adding the node to 
the cluster.


The DHCP server happens to be in the same subnet but no, I can't ping it 
as I can't ping anything beyond the physical interfaces of the hosts.


I've added a third host and can also ping that from the VM on node 1.

For a hoot also spun up a new CentOS VM in case this was an OS problem. 
Same results. And when the two VMs are on different hosts, they can't 
ping each other. When I migrate one so they're both on the same host, 
they can each ping each other.


On 5/7/2018 1:58 PM, Dominik Holler wrote:

On Mon, 7 May 2018 11:43:51 -0700
"Rue, Randy"  wrote:


I've sort of had some progress. On Friday I went to the dentist and
when I returned, my VM could ping google.

I don't believe I changed anything Friday morning but I confess I've
been flailing on this for so long I'm not keeping detailed notes on
what I change. And as I'm evaluating oVirt as a possible replacement
for our production xencenter/xenserver systems, I need to know what
was wrong and what fixed it.

I reinstalled the ovirt-engine box and two hosts and started again.
The only change I've made beyond the default is to remove the
no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are
no filters applied. At this point I'm back to an ubuntu LTS server VM
that again, is getting a DHCP IP address, nameserver entries in
resolv.conf, and "route" shows correct local routing for addresses on
the same subnet and the correct gateway for the rest of the world.
The VM is even registering its hostname in our DNS correctly. And I
can ping the static IP of the host the VM is on, but not the subnet
gateway or anything in the real world.


Can you ping the DHCP server?


Two things I haven't mentioned that I haven't seen anything in the
docs about. My ovirt-engine box is on a different subnet than my
hosts, and my hosts are using a bonded pair of physical interfaces
(XOR mode) for their single LAN connection.

Was the bond created before adding the hosts to oVirt, or after adding
the hosts via oVirt web UI?
If the switch requires configuration for the bond, is this applied?
Can you check if the VM can ping the getaway, if you use a simple
Ethernet connection instead of the bond?


Did I miss something in the docs where these are a problem?

Dominik, to answer your thoughts earlier:

* name resolution isn't happening at all, the VM can't reach a DNS
server

* I don't manage the data center network gear but am pretty sure
there's no configuration that blocks traffic. This is supported by my
temporary success on Friday. And we also have other virtualization
hosts (VMWare hosts) in the same subnet, that forward traffic to/from
their VMs just fine.


OK, L3 seems to work now sometimes.


* tcpdump on the host's ovirtmgmt interface is pretty noisy but if I
grep for the ubuntu DDNS name I see a slew of ARP requests. I can see
pings to the host's IP address, and attempts to SSH from the VM to
its host. Any attempt to touch anything past the host shows nothing
on any interface in tcpdump, not a ping to the subnet gateway, not an
SSH attempt, not a DNS query or a ping to known IP address.


The outgoing ARP requests looks like the traffic of the VM is forwarded
to ovirtmgmt.
Do you see ARP reply to the VM?
Maybe the VM fails to get the MAC address of the gateway.


* hot damn, here's a clue! I can ping other oVirt hosts! (by IP only)
I also tried pinging the ovirt-engine box, wasn't surprised when that
failed as the VM would need to reach the gateway to get to the
different subnet.

So it appears that even though I've set up the ovirtmgmt network
using defaults, and it has the "VM Network" option checked, my
logical network is still set to only allow traffic between the VMs
and hosts.

What am I missing?

-randy


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] dracut-initqueue[488]: Warning: Could not boot.

2018-05-07 Thread Justin Zygmont
There must be more error messages than that?


From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of 
Abdelkarim ZANNI
Sent: Monday, May 7, 2018 8:50 AM
To: Users@ovirt.org
Subject: [ovirt-users] dracut-initqueue[488]: Warning: Could not boot.


Hello Ovirt users,



i'm trying to install ovirt node on a Dell server using a bootable usb.

After i click install ovirt, the following message is displayed on the screen;

dracut-initqueue[488]: Warning: Could not boot.



I tried different version of Ovirt node without success, can anyone point me to 
how to sort this out ?



Thank you in advance.



--

Abdelkarim ZANNI

GSM: +212671644088

NUMEA | Rabat - Morocco
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Rue, Randy
Looks like the physical interface on the host and the virtual interface 
on the VM are both at the default 1500 MTU.


How can I determine the MTU setting for the physical switches without 
admin access to them? Or do I need to ask the network team?




On 5/7/2018 2:03 PM, Clint Boggio wrote:

Randy this flaky layer two problem reeks of a possible MTU situation between 
your oVirt switches and your physical switches.


On May 7, 2018, at 3:59 PM, Dominik Holler  wrote:

On Mon, 7 May 2018 11:43:51 -0700
"Rue, Randy"  wrote:


I've sort of had some progress. On Friday I went to the dentist and
when I returned, my VM could ping google.

I don't believe I changed anything Friday morning but I confess I've
been flailing on this for so long I'm not keeping detailed notes on
what I change. And as I'm evaluating oVirt as a possible replacement
for our production xencenter/xenserver systems, I need to know what
was wrong and what fixed it.

I reinstalled the ovirt-engine box and two hosts and started again.
The only change I've made beyond the default is to remove the
no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are
no filters applied. At this point I'm back to an ubuntu LTS server VM
that again, is getting a DHCP IP address, nameserver entries in
resolv.conf, and "route" shows correct local routing for addresses on
the same subnet and the correct gateway for the rest of the world.
The VM is even registering its hostname in our DNS correctly. And I
can ping the static IP of the host the VM is on, but not the subnet
gateway or anything in the real world.


Can you ping the DHCP server?


Two things I haven't mentioned that I haven't seen anything in the
docs about. My ovirt-engine box is on a different subnet than my
hosts, and my hosts are using a bonded pair of physical interfaces
(XOR mode) for their single LAN connection.

Was the bond created before adding the hosts to oVirt, or after adding
the hosts via oVirt web UI?
If the switch requires configuration for the bond, is this applied?
Can you check if the VM can ping the getaway, if you use a simple
Ethernet connection instead of the bond?


Did I miss something in the docs where these are a problem?

Dominik, to answer your thoughts earlier:

* name resolution isn't happening at all, the VM can't reach a DNS
server

* I don't manage the data center network gear but am pretty sure
there's no configuration that blocks traffic. This is supported by my
temporary success on Friday. And we also have other virtualization
hosts (VMWare hosts) in the same subnet, that forward traffic to/from
their VMs just fine.


OK, L3 seems to work now sometimes.


* tcpdump on the host's ovirtmgmt interface is pretty noisy but if I
grep for the ubuntu DDNS name I see a slew of ARP requests. I can see
pings to the host's IP address, and attempts to SSH from the VM to
its host. Any attempt to touch anything past the host shows nothing
on any interface in tcpdump, not a ping to the subnet gateway, not an
SSH attempt, not a DNS query or a ping to known IP address.


The outgoing ARP requests looks like the traffic of the VM is forwarded
to ovirtmgmt.
Do you see ARP reply to the VM?
Maybe the VM fails to get the MAC address of the gateway.


* hot damn, here's a clue! I can ping other oVirt hosts! (by IP only)
I also tried pinging the ovirt-engine box, wasn't surprised when that
failed as the VM would need to reach the gateway to get to the
different subnet.

So it appears that even though I've set up the ovirtmgmt network
using defaults, and it has the "VM Network" option checked, my
logical network is still set to only allow traffic between the VMs
and hosts.

What am I missing?

-randy

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Justin Zygmont

>Was the bond created before adding the hosts to oVirt, or after adding the 
>hosts via oVirt web UI?
>If the switch requires configuration for the bond, is this applied?
>Can you check if the VM can ping the getaway, if you use a simple Ethernet 
>connection instead of the >bond?

Should any of this be done before adding the host to oVirt?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] dracut-initqueue[488]: Warning: Could not boot.

2018-05-07 Thread Charles Lam
Dear Mr. Zanni:

I have had what I believe to be similar issues.  I am in no way an expert
or even knowledgeable, but from experience I have found this to work:
dd if=/tmp/ovirt-node-ng-installer-ovirt-4.2-2018050417.iso of=/dev/sdb
This command assumes that you are on CentOS or similar; assumes that your
USB stick is at "/dev/sdb"; assumes that you have placed the ISO you want
to image the USB stick with at "/tmp/"; and assumes that the name of your
ISO is " ovirt-node-ng-installer-ovirt-4.2-2018050417.iso" (most likely it
will be something different)

Again, I am not that knowledgeable, but I have not found the directions on
the oVirt website imaging Node to a USB stick to work for me, nor have I
had success (with Node only) with the usually great Rufus.

Sincerely,
Charles

On Mon, May 7, 2018 at 4:37 PM Abdelkarim ZANNI  wrote:

> Hello Ovirt users,
>
>
> i'm trying to install ovirt node on a Dell server using a bootable usb.
>
> After i click install ovirt, the following message is displayed on the
> screen;
>
> *dracut-initqueue[488]: Warning: Could not boot.
> *
> I tried different version of Ovirt node without success, can anyone point me 
> to how to sort this out ?
>
> Thank you in advance*.
>
> *
>
> --
> Abdelkarim ZANNI
> GSM: +212671644088
> NUMEA | Rabat - Morocco
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Clint Boggio

Randy this flaky layer two problem reeks of a possible MTU situation between 
your oVirt switches and your physical switches.

> On May 7, 2018, at 3:59 PM, Dominik Holler  wrote:
> 
> On Mon, 7 May 2018 11:43:51 -0700
> "Rue, Randy"  wrote:
> 
>> I've sort of had some progress. On Friday I went to the dentist and
>> when I returned, my VM could ping google.
>> 
>> I don't believe I changed anything Friday morning but I confess I've 
>> been flailing on this for so long I'm not keeping detailed notes on
>> what I change. And as I'm evaluating oVirt as a possible replacement
>> for our production xencenter/xenserver systems, I need to know what
>> was wrong and what fixed it.
>> 
>> I reinstalled the ovirt-engine box and two hosts and started again.
>> The only change I've made beyond the default is to remove the 
>> no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are
>> no filters applied. At this point I'm back to an ubuntu LTS server VM
>> that again, is getting a DHCP IP address, nameserver entries in
>> resolv.conf, and "route" shows correct local routing for addresses on
>> the same subnet and the correct gateway for the rest of the world.
>> The VM is even registering its hostname in our DNS correctly. And I
>> can ping the static IP of the host the VM is on, but not the subnet
>> gateway or anything in the real world.
>> 
> 
> Can you ping the DHCP server?
> 
>> Two things I haven't mentioned that I haven't seen anything in the
>> docs about. My ovirt-engine box is on a different subnet than my
>> hosts, and my hosts are using a bonded pair of physical interfaces
>> (XOR mode) for their single LAN connection.
> 
> Was the bond created before adding the hosts to oVirt, or after adding
> the hosts via oVirt web UI?
> If the switch requires configuration for the bond, is this applied?
> Can you check if the VM can ping the getaway, if you use a simple
> Ethernet connection instead of the bond?
> 
>> Did I miss something in the docs where these are a problem?
>> 
>> Dominik, to answer your thoughts earlier:
>> 
>> * name resolution isn't happening at all, the VM can't reach a DNS
>> server
>> 
>> * I don't manage the data center network gear but am pretty sure
>> there's no configuration that blocks traffic. This is supported by my
>> temporary success on Friday. And we also have other virtualization
>> hosts (VMWare hosts) in the same subnet, that forward traffic to/from
>> their VMs just fine.
>> 
> 
> OK, L3 seems to work now sometimes.
> 
>> * tcpdump on the host's ovirtmgmt interface is pretty noisy but if I 
>> grep for the ubuntu DDNS name I see a slew of ARP requests. I can see 
>> pings to the host's IP address, and attempts to SSH from the VM to
>> its host. Any attempt to touch anything past the host shows nothing
>> on any interface in tcpdump, not a ping to the subnet gateway, not an
>> SSH attempt, not a DNS query or a ping to known IP address.
>> 
> 
> The outgoing ARP requests looks like the traffic of the VM is forwarded
> to ovirtmgmt.
> Do you see ARP reply to the VM?
> Maybe the VM fails to get the MAC address of the gateway.
> 
>> * hot damn, here's a clue! I can ping other oVirt hosts! (by IP only)
>> I also tried pinging the ovirt-engine box, wasn't surprised when that 
>> failed as the VM would need to reach the gateway to get to the
>> different subnet.
>> 
>> So it appears that even though I've set up the ovirtmgmt network
>> using defaults, and it has the "VM Network" option checked, my
>> logical network is still set to only allow traffic between the VMs
>> and hosts.
>> 
>> What am I missing?
>> 
>> -randy
> 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Dominik Holler
On Mon, 7 May 2018 11:43:51 -0700
"Rue, Randy"  wrote:

> I've sort of had some progress. On Friday I went to the dentist and
> when I returned, my VM could ping google.
> 
> I don't believe I changed anything Friday morning but I confess I've 
> been flailing on this for so long I'm not keeping detailed notes on
> what I change. And as I'm evaluating oVirt as a possible replacement
> for our production xencenter/xenserver systems, I need to know what
> was wrong and what fixed it.
> 
> I reinstalled the ovirt-engine box and two hosts and started again.
> The only change I've made beyond the default is to remove the 
> no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are
> no filters applied. At this point I'm back to an ubuntu LTS server VM
> that again, is getting a DHCP IP address, nameserver entries in
> resolv.conf, and "route" shows correct local routing for addresses on
> the same subnet and the correct gateway for the rest of the world.
> The VM is even registering its hostname in our DNS correctly. And I
> can ping the static IP of the host the VM is on, but not the subnet
> gateway or anything in the real world.
> 

Can you ping the DHCP server?

> Two things I haven't mentioned that I haven't seen anything in the
> docs about. My ovirt-engine box is on a different subnet than my
> hosts, and my hosts are using a bonded pair of physical interfaces
> (XOR mode) for their single LAN connection.

Was the bond created before adding the hosts to oVirt, or after adding
the hosts via oVirt web UI?
If the switch requires configuration for the bond, is this applied?
Can you check if the VM can ping the getaway, if you use a simple
Ethernet connection instead of the bond?

> Did I miss something in the docs where these are a problem?
> 
> Dominik, to answer your thoughts earlier:
> 
> * name resolution isn't happening at all, the VM can't reach a DNS
> server
> 
> * I don't manage the data center network gear but am pretty sure
> there's no configuration that blocks traffic. This is supported by my
> temporary success on Friday. And we also have other virtualization
> hosts (VMWare hosts) in the same subnet, that forward traffic to/from
> their VMs just fine.
> 

OK, L3 seems to work now sometimes.

> * tcpdump on the host's ovirtmgmt interface is pretty noisy but if I 
> grep for the ubuntu DDNS name I see a slew of ARP requests. I can see 
> pings to the host's IP address, and attempts to SSH from the VM to
> its host. Any attempt to touch anything past the host shows nothing
> on any interface in tcpdump, not a ping to the subnet gateway, not an
> SSH attempt, not a DNS query or a ping to known IP address.
> 

The outgoing ARP requests looks like the traffic of the VM is forwarded
to ovirtmgmt.
Do you see ARP reply to the VM?
Maybe the VM fails to get the MAC address of the gateway.

> * hot damn, here's a clue! I can ping other oVirt hosts! (by IP only)
> I also tried pinging the ovirt-engine box, wasn't surprised when that 
> failed as the VM would need to reach the gateway to get to the
> different subnet.
> 
> So it appears that even though I've set up the ovirtmgmt network
> using defaults, and it has the "VM Network" option checked, my
> logical network is still set to only allow traffic between the VMs
> and hosts.
> 
> What am I missing?
> 
> -randy

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] dracut-initqueue[488]: Warning: Could not boot.

2018-05-07 Thread Abdelkarim ZANNI

Hello Ovirt users,


i'm trying to install ovirt node on a Dell server using a bootable usb.

After i click install ovirt, the following message is displayed on the 
screen;


/*dracut-initqueue[488]: Warning: Could not boot*. / I tried different 
version of Ovirt node without success, can anyone point me to how to 
sort this out ? Thank you in advance/. /


--
Abdelkarim ZANNI
GSM: +212671644088
NUMEA | Rabat - Morocco

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] newbie questions on networking

2018-05-07 Thread Rue, Randy
I've sort of had some progress. On Friday I went to the dentist and when 
I returned, my VM could ping google.


I don't believe I changed anything Friday morning but I confess I've 
been flailing on this for so long I'm not keeping detailed notes on what 
I change. And as I'm evaluating oVirt as a possible replacement for our 
production xencenter/xenserver systems, I need to know what was wrong 
and what fixed it.


I reinstalled the ovirt-engine box and two hosts and started again. The 
only change I've made beyond the default is to remove the 
no-mac-spoofing filter from the ovirtmgmt vNIC profile so there are no 
filters applied. At this point I'm back to an ubuntu LTS server VM that 
again, is getting a DHCP IP address, nameserver entries in resolv.conf, 
and "route" shows correct local routing for addresses on the same subnet 
and the correct gateway for the rest of the world. The VM is even 
registering its hostname in our DNS correctly. And I can ping the static 
IP of the host the VM is on, but not the subnet gateway or anything in 
the real world.


Two things I haven't mentioned that I haven't seen anything in the docs 
about. My ovirt-engine box is on a different subnet than my hosts, and 
my hosts are using a bonded pair of physical interfaces (XOR mode) for 
their single LAN connection. Did I miss something in the docs where 
these are a problem?


Dominik, to answer your thoughts earlier:

* name resolution isn't happening at all, the VM can't reach a DNS server

* I don't manage the data center network gear but am pretty sure there's 
no configuration that blocks traffic. This is supported by my temporary 
success on Friday. And we also have other virtualization hosts (VMWare 
hosts) in the same subnet, that forward traffic to/from their VMs just fine.


* tcpdump on the host's ovirtmgmt interface is pretty noisy but if I 
grep for the ubuntu DDNS name I see a slew of ARP requests. I can see 
pings to the host's IP address, and attempts to SSH from the VM to its 
host. Any attempt to touch anything past the host shows nothing on any 
interface in tcpdump, not a ping to the subnet gateway, not an SSH 
attempt, not a DNS query or a ping to known IP address.


* hot damn, here's a clue! I can ping other oVirt hosts! (by IP only) I 
also tried pinging the ovirt-engine box, wasn't surprised when that 
failed as the VM would need to reach the gateway to get to the different 
subnet.


So it appears that even though I've set up the ovirtmgmt network using 
defaults, and it has the "VM Network" option checked, my logical network 
is still set to only allow traffic between the VMs and hosts.


What am I missing?

-randy
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problems with OVN

2018-05-07 Thread Samuli Heinonen

Hi Marcin,

Thank you for your response.

I used engine-setup to do the configuration. Only exception is that I 
had to run "vdsm-tool ovn-config engine-ip local-ip" (ie. vdsm-tool 
ovn-config 10.0.1.101 10.0.1.21) on hypervisors.


Here is the output of requested commands:

[root@oe ~]# ovn-sbctl show
Chassis "049183d5-61b6-4b9c-bae3-c7b10d30f8cb"
hostname: "o2.hirundinidae.local"
Encap geneve
ip: "10.0.1.18"
options: {csum="true"}
Port_Binding "87c5e44a-7c8b-41b2-89a6-fa52f27643ed"
Chassis "972f1b7b-10de-4e4f-a5f9-f080890f087d"
hostname: "o3.hirundinidae.local"
Encap geneve
ip: "10.0.1.21"
options: {csum="true"}
Port_Binding "ccea5185-3efa-4d9c-9475-9e46009fea4f"
Port_Binding "e868219c-f16c-45c6-b7b1-72d044fee602"

[root@oe ~]# ovn-nbctl show
switch 7d264a6c-ea48-4a6d-9663-5244102dc9bb (vm-private)
port 4ec3ecf6-d04a-406c-8354-c5e195ffde05
addresses: ["00:1a:4a:16:01:06 dynamic"]
switch 40aedb7d-b1c3-400e-9ddb-16bee3bb312a (vm-public)
port 87c5e44a-7c8b-41b2-89a6-fa52f27643ed
addresses: ["00:1a:4a:16:01:03"]
port ccea5185-3efa-4d9c-9475-9e46009fea4f
addresses: ["00:1a:4a:16:01:0c"]
port e868219c-f16c-45c6-b7b1-72d044fee602
addresses: ["00:1a:4a:16:01:0a"]

[root@o2 ~]# ip addr
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: enp0s31f6:  mtu 1500 qdisc 
pfifo_fast master ovirtmgmt state UP qlen 1000

link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2:  mtu 1500 qdisc 
pfifo_fast master public state UNKNOWN qlen 1000

link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
4: ovs-system:  mtu 1500 qdisc noop state DOWN qlen 
1000

link/ether 82:49:e1:15:af:56 brd ff:ff:ff:ff:ff:ff
5: br-int:  mtu 1500 qdisc noop state DOWN qlen 1000
link/ether a2:bb:78:7e:35:4b brd ff:ff:ff:ff:ff:ff
21: public:  mtu 1500 qdisc noqueue 
state UP qlen 1000

link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
inet6 fe80::523e:aaff:fe4c:9b01/64 scope link
   valid_lft forever preferred_lft forever
22: ovirtmgmt:  mtu 1500 qdisc noqueue 
state UP qlen 1000

link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.18/24 brd 10.0.1.255 scope global ovirtmgmt
   valid_lft forever preferred_lft forever
inet6 fe80::7af2:9eff:fe90:bc64/64 scope link
   valid_lft forever preferred_lft forever
23: genev_sys_6081:  mtu 65000 qdisc 
noqueue master ovs-system state UNKNOWN qlen 1000

link/ether 02:c0:7a:e3:4e:76 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c0:7aff:fee3:4e76/64 scope link
   valid_lft forever preferred_lft forever
24: ;vdsmdummy;:  mtu 1500 qdisc noop state DOWN 
qlen 1000

link/ether a2:2f:f2:58:88:da brd ff:ff:ff:ff:ff:ff
26: vnet0:  mtu 1500 qdisc pfifo_fast 
master ovs-system state UNKNOWN qlen 1000

link/ether fe:1a:4a:16:01:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:103/64 scope link
   valid_lft forever preferred_lft forever
29: vnet1:  mtu 1500 qdisc pfifo_fast 
master ovirtmgmt state UNKNOWN qlen 1000

link/ether fe:1a:4a:16:01:05 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:105/64 scope link
   valid_lft forever preferred_lft forever

[root@o2 ~]# ovs-vsctl show
6be6d37c-74cf-485e-9957-f8eb4bddb2ca
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-972f1b-0"
Interface "ovn-972f1b-0"
type: geneve
options: {csum="true", key=flow, remote_ip="10.0.1.21"}
Port "vnet0"
Interface "vnet0"
ovs_version: "2.9.0"

[root@o3 ~]# ip addr
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: enp0s31f6:  mtu 1500 qdisc 
pfifo_fast master ovirtmgmt state UP qlen 1000

link/ether 78:f2:9e:90:bc:50 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2:  mtu 1500 qdisc 
pfifo_fast master public state UNKNOWN qlen 1000

link/ether 50:3e:aa:4c:9c:03 brd ff:ff:ff:ff:ff:ff
4: ovs-system:  mtu 1500 qdisc noop state DOWN qlen 
1000

link/ether 7e:43:c1:b0:48:73 brd ff:ff:ff:ff:ff:ff
5: br-int:  mtu 1500 

Re: [ovirt-users] oVirt and Oracle Linux support

2018-05-07 Thread Michal Skrivanek


> On 3 May 2018, at 11:40, Simon Coter  wrote:
> 
> Hi,
> 
> I'm new to this ML.
> I started to play a bit with oVirt and I saw that you actually support RH and 
> CentOS.
> Is there any plan to also support Oracle Linux ?

nope

why would you want to use OL? Supposing you do not want to run it together with 
Oracle server.
If you want to pay for OS buy RHEL, at least those $ would be used to improve 
oVirt;-)

> I had to fight so much to get everything on OL correctly running.

yeah, it’s probably doable if you mix it with centos packages manually
probably not worth the effort maintaining it

Thanks,
michal

> Thanks
> 
> Simon
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] sun.security.validator.ValidatorException after update to 4.2.3

2018-05-07 Thread Jiří Sléžka
Hi,

after upgrade ovirt from 4.2.2 to 4.2.3.5-1.el7.centos I cannot login
into admin portal because

sun.security.validator.ValidatorException: PKIX path building failed:
sun.security.provider.certpath.SunCertPathBuilderException: unable to
find valid certification path to requested target

I am using custom 3rd party certificate

Any hints how to resolve this issue?

Thanks in advance,

Jiri Slezka




smime.p7s
Description: S/MIME Cryptographic Signature
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] problem to create snapshot

2018-05-07 Thread Marcelo Leandro
Good morning,

vdsm-client StorageDomain getInfo storagedomainID= :

{
"uuid": "6e5cce71-3438-4045-9d54-607123e0557e",
"type": "ISCSI",
"vguuid": "7JOYDc-iQgm-11Pk-2czh-S8k0-Qc5U-f1npF1",
"metadataDevice": "36005076300810a4db802",
"state": "OK",
"version": "4",
"role": "Regular",
"vgMetadataDevice": "36005076300810a4db802",
"class": "Data",
"pool": [
"77e24b20-9d21-4952-a089-3c5c592b4e6d"
],
"name": "IBM01"
}


I am have 3 VMs runs in this storage, i am migrate vms to another storages
but this vms show the same error when try migrate on because need snapshots.

Very Thanks.

2018-05-06 11:26 GMT-03:00 Ala Hino :

> [Please always CC ovirt-users so other engineer can provide help]
>
> It seems that the storage domain is corrupted.
> Can you please run the following command and send the output?
>
> vdsm-client StorageDomain getInfo storagedomainID=
>
> You may need to move the storage to maintenance and re-initialize it.
>
> On Thu, May 3, 2018 at 10:10 PM, Marcelo Leandro 
> wrote:
>
>> Hello,
>>
>> Thank you for reply:
>>
>> oVirt Version -  4.1.9
>> Vdsm Versoin - 4.20.23
>>
>> attached logs,
>>
>> Very Thanks.
>>
>> Marcelo Leandro
>>
>> 2018-05-03 15:59 GMT-03:00 Ala Hino :
>>
>>> Can you please share more info?
>>> - The version you are using
>>> - Full log of vdsm and the engine
>>>
>>> Is the VM running or down while creating the snapshot?
>>>
>>> On Thu, May 3, 2018 at 8:32 PM, Marcelo Leandro 
>>> wrote:
>>>
 Anyone help me?

 2018-05-02 17:55 GMT-03:00 Marcelo Leandro :

> Hello ,
>
> I am geting error when try do a snapshot:
>
> Error msg in SPM log.
>
> 2018-05-02 17:46:11,235-0300 WARN  (tasks/2) [storage.ResourceManager]
> Resource factory failed to create resource '01_img_6e5cce71-3438-4045-9d5
> 4-607123e0557e.ed7f1c0f-5986-4979-b783-5c465b0854c6'. Canceling
> request. (resourceManager:543)
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py",
> line 539, in registerResource
> obj = namespaceObj.factory.createResource(name, lockType)
>   File 
> "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py",
> line 193, in createResource
> lockType)
>   File 
> "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py",
> line 122, in __getResourceCandidatesList
> imgUUID=resourceName)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line
> 213, in getChain
> if srcVol.isLeaf():
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py",
> line 1430, in isLeaf
> return self._manifest.isLeaf()
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py",
> line 138, in isLeaf
> return self.getVolType() == sc.type2name(sc.LEAF_VOL)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py",
> line 134, in getVolType
> self.voltype = self.getMetaParam(sc.VOLTYPE)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py",
> line 118, in getMetaParam
> meta = self.getMetadata()
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py",
> line 112, in getMetadata
> md = VolumeMetadata.from_lines(lines)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volumemetadata.py",
> line 103, in from_lines
> "Missing metadata key: %s: found: %s" % (e, md))
> MetaDataKeyNotFoundError: Meta Data key not found error: ("Missing
> metadata key: 'DOMAIN': found: {'NONE': '#
> 
> 
> 
> 
> 
> 
> 
> #'}",)
> 2018-05-02 17:46:11,286-0300 WARN  (tasks/2)
> [storage.ResourceManager.Request] (ResName='01_img_6e5cce71-3438
> -4045-9d54-607123e0557e.ed7f1c0f-5986-4979-b783-5c465b0854c6',
> ReqID='a3cd9388-977b-45b9-9aa0-e431aeff8750') Tried to cancel a
> processed request (resourceManager:187)
> 2018-05-02 17:46:11,286-0300 ERROR (tasks/2)
> [storage.TaskManager.Task] (Task='ba0766ca-08a1-4d65-a4e9-1e0171939037')
> Unexpected error (task:875)
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line
> 882, in _run
> return fn(*args, 

Re: [ovirt-users] ovirt engine frequently rebooting/changing host

2018-05-07 Thread Yedidyah Bar David
On Mon, May 7, 2018 at 11:50 AM, Bernhard Dick  wrote:
> Hi,
>
> currently I'm evaluating oVirt and I have three hosts installed within
> nested KVM. They're sharing a gluster environment which has been configured
> using the oVirt Node Wizards.
> It seems to work quite well, but after some hours I get many status update
> mails from the ovirt engine which are either going to EngineStop or
> EngeineForceStop. Sometimes the host where the engine runs is switched.
> After some of those reboots there is silence for some hours before it is
> starting over. Can you tell me where I should look at to fix that problem?

You can check, on all hosts, /var/log/ovirt-hosted-engine-ha/* .

Good luck,
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] ovirt engine frequently rebooting/changing host

2018-05-07 Thread Bernhard Dick

Hi,

currently I'm evaluating oVirt and I have three hosts installed within 
nested KVM. They're sharing a gluster environment which has been 
configured using the oVirt Node Wizards.
It seems to work quite well, but after some hours I get many status 
update mails from the ovirt engine which are either going to EngineStop 
or EngeineForceStop. Sometimes the host where the engine runs is 
switched. After some of those reboots there is silence for some hours 
before it is starting over. Can you tell me where I should look at to 
fix that problem?


  Regards
Bernhard Dick
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problems with OVN

2018-05-07 Thread Marcin Mirecki
Hi Samuli,

Let's first make sure the configuration is correct.
How did you configure the env? Did you use the automatic engine-setup
configuration?

Can you please send me the output of the following:

on engine:
  ovn-sbctl show
  ovn-nbctl show

on hosts:
  ip addr
  ovs-vsctl show

The 'vdsm-tool ovn-config' command configures the ovn controller to use the
first ip as the ovn central, and the local tunnel to use the second one.

Regards,
Marcin


On Sun, May 6, 2018 at 10:42 AM, Samuli Heinonen 
wrote:

> Hi all,
>
> I'm building a home lab using oVirt+GlusterFS in hyperconverged(ish) setup.
>
> My setup consists of 2x nodes with ASRock H110M-STX motherboard, Intel
> Pentium G4560 3,5 GHz CPU and 16 GB RAM. Motherboard has integrated Intel
> Gigabit I219V LAN. At the moment I'm using RaspberryPi as Gluster arbiter
> node. Nodes are connected to basic "desktop switch" without any management
> available.
>
> Hardware is nowhere near perfect, but it get its job done and is enough
> for playing around. However I'm having problems getting OVN to work
> properly and I'm clueless where to look next.
>
> oVirt is setup like this:
> oVirt engine host oe / 10.0.1.101
> oVirt hypervisor host o2 / 10.0.1.18
> oVirt hypervisor host o3 / 10.0.1.21
> OVN network 10.0.200.0/24
>
> When I spin up a VM in o2 and o3 with IP address in network 10.0.1.0/24
> everything works fine. VMs can interact between each other without any
> problems.
>
> Problems show up when I try to use OVN based network between virtual
> machines. If virtual machines are on same hypervisor then everything seems
> to work ok. But if I have virtual machine on hypervisor o2 and another one
> on hypervisor o3 then TCP connections doesn't work very well. UDP seems to
> be ok and it's possible to ping hosts, do dns & ntp queries and so on.
>
> Problem with TCP is that for example when taking SSH connection to another
> host at some point connection just hangs and most of the time it's not even
> possible to even log in before connectiong hangs. If I look into tcpdump at
> that point it looks like packets never reach destination. Also, if I have
> multiple connections, then all of them hang at the same time.
>
> I have tried switching off tx checksum and other similar settings, but it
> didn't make any difference.
>
> I'm suspecting that hardware is not good enough. Before investigating into
> new hardware I'd like to get some confirmation that everything is setup
> correctly.
>
> When setting up oVirt/OVN I had to run following undocumented command to
> get it working at all: vdsm-tool ovn-config 10.0.1.101 10.0.1.21 (oVirt
> engine IP, hypervisor IP). Especially this makes me think that I have
> missed some crucial part in configuration.
>
> On oVirt engine in /var/log/openvswitch/ovsdb-server-nb.log there are
> error messages:
> 2018-05-06T08:30:05.418Z|00913|stream_ssl|WARN|SSL_read: unexpected SSL
> connection close
> 2018-05-06T08:30:05.418Z|00914|jsonrpc|WARN|ssl:127.0.0.1:53152: receive
> error: Protocol error
> 2018-05-06T08:30:05.419Z|00915|reconnect|WARN|ssl:127.0.0.1:53152:
> connection dropped (Protocol error)
>
> To be honest, I'm not sure what's causing those error messages or are they
> related. I found out some bug reports stating that they are not critical.
>
> Any ideas what to do next or should I just get better hardware? :)
>
> Best regards,
> Samuli Heinonen
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Data Center Upgrade to 3.6 fails with "Upgrading a pool while an upgrade is in process is unsupported" - any fix for this ?

2018-05-07 Thread Joseph Kelly
Hello All - I'm trying to upgrade a Data Center in ovirt 3.6.4 from 3.4 to 3.6 
but I'm getting this error when I tried:

May 7, 2018 3:07:55 PM VDSM command failed: Upgrading a pool while an upgrade 
is in process is unsupported
(pool: `9667c5e8-97b1-4e09-be44-2696a69f8959`)

Please note that all clusters are already at 3.6 compatability and the final 
step is to upgrade the Data Center to 3.6.
So I've tried these steps as a workaorund from the RHEV tech-doc below but it 
hasn't worked for me:

Deactivate the Export and ISO domains.
Switch SPM to another host.
Try the upgrade again
Activate Export and ISO domains as required.

(From https://access.redhat.com/solutions/2332581 )

And I also tried to search mail-archive.com for past Email but didn't find 
anything matching this particular issue.

https://www.mail-archive.com/search?l=users%40ovirt.org=3.6+compat=0=0
https://www.mail-archive.com/search?l=users%40ovirt.org=ovirt+Data+center+compat=0=0

So has anyone found another way to fix this problem e.g. does the ovirt DB need 
to be directly updated ?

Thanks,
Joe.


--
J. Kelly
Infrastructure Engineer
TradingScreen
www.tradingscreen.com
email: joseph.ke...@tradingscreen.com


Follow TradingScreen on Twitter, 
Facebook, or our 
blog, Trading Smarter

This message is intended only for the recipient(s) named above and may contain 
confidential information. If you are not an intended recipient, you should not 
review, distribute or copy this message. Please notify the sender immediately 
by e-mail if you have received this message in error and delete it from your 
system.




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] adding a host

2018-05-07 Thread Alona Kaplan
First restart the engine. Then try to change the required network to be
non-required and click on RefreshCapabilities on the host.
It should move the host to active state without the need to remove it.

If it doesn't help, please attach your full engine.log and server.log.

Anyway please update your ovirt to version 4.2.3.4, the bug was fixed there.

Thanks,
Alona.

On Mon, May 7, 2018 at 7:30 AM, Justin Zygmont 
wrote:

> I’ve deselect the required status, I will try to add it again if I am ever
> able to remove the old host.
>
>
>
>
>
> *From:* Alona Kaplan [mailto:alkap...@redhat.com]
> *Sent:* Sunday, May 6, 2018 7:31 AM
> *To:* Yanir Quinn 
> *Cc:* Justin Zygmont ; users@ovirt.org
>
> *Subject:* Re: [ovirt-users] adding a host
>
>
>
> There was a bug when adding a host to a cluster that contains a required
> network. It was fixed in 4.2.3.4.
>
> Bug-Url- https://bugzilla.redhat.com/1570388
> 
>
>
>
> Thanks,
>
> Alona.
>
>
>
> On Sun, May 6, 2018 at 3:49 PM, Yanir Quinn  wrote:
>
> For removing the non operational host :
>
> 1.Right click on the host name
>
> 2.Click on  "Confirm host has been rebooted"
>
> 3.Remove the host
>
>
> For the issue you are experiencing with host addition, according to the
> engine logs you have sent, you might need to perform a few steps ,  see:
> https://bugzilla.redhat.com/show_bug.cgi?id=1516256#c2
> 
>
> I would also recommend to check the the host's network is not down.
>
> Also, during installation of the host,observe the messages in the Events
> section (UI)
>
> Hope this helps.
>
>
>
>
>
>
>
>
>
> On Thu, May 3, 2018 at 10:07 PM, Justin Zygmont 
> wrote:
>
> I can’t seem to do anything to control the host from the engine, when I
> select it for Maint, the engine log shows:
>
>
>
> [org.ovirt.engine.core.bll.MaintenanceNumberOfVdssCommand] (default
> task-50) [90ba81ef-21e4-4272-8c59-84786e969ff7] Running command:
> MaintenanceNumberOfVdssCommand internal: false. Entities affected :  ID:
> 74dfe965-cb11-495a-96a0-3dae6b3cbd75 Type: VDSAction group
> MANIPULATE_HOST with role type ADMIN
>
> 2018-05-03 12:00:37,918-07 INFO  
> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> (default task-50) [90ba81ef-21e4-4272-8c59-84786e969ff7] START,
> SetVdsStatusVDSCommand(HostName = ovnode102,
> SetVdsStatusVDSCommandParameters:{hostId='74dfe965-cb11-495a-96a0-3dae6b3cbd75',
> status='PreparingForMaintenance', nonOperationalReason='NONE',
> stopSpmFailureLogged='true', maintenanceReason='null'}), log id: 647d5f78
>
>
>
>
>
> I have only 1 host in the DC, status is Up, the cluster says host count is
> 2 even though the second host stays Non Operational.  I don’t know how to
> remove it.
>
> I just installed and tried to join the DC, this is a fresh installation,
> the engine was launched through cockpit.
>
>
>
> Heres what nodectl shows from the host:
>
>
>
> ovnode102 ~]# nodectl check
>
> Status: OK
>
> Bootloader ... OK
>
>   Layer boot entries ... OK
>
>   Valid boot entries ... OK
>
> Mount points ... OK
>
>   Separate /var ... OK
>
>   Discard is used ... OK
>
> Basic storage ... OK
>
>   Initialized VG ... OK
>
>   Initialized Thin Pool ... OK
>
>   Initialized LVs ... OK
>
> Thin storage ... OK
>
>   Checking available space in thinpool ... OK
>
>   Checking thinpool auto-extend ... OK
>
> vdsmd ... OK
>
>
>
>
>
>
>
> Thanks,
>
>
>
>
>
> *From:* Yanir Quinn [mailto:yqu...@redhat.com]
> *Sent:* Thursday, May 3, 2018 1:19 AM
>
>
> *To:* Justin Zygmont 
> *Cc:* users@ovirt.org
> *Subject:* Re: [ovirt-users] adding a host
>
>
>
> Did you try switching the host to maintenance mode first ?
>
> What is the state of the data center and how many active hosts do you have
> now?
>
> And did you perform any updates recently or just run a fresh installation
> ?  if so , did you run engine-setup before launching engine ?
>
>
>
> On Thu, May 3, 2018 at 12:47 AM, Justin Zygmont 
> wrote:
>
> I read this page and it doesn’t help since this is a host that can’t be
> removed, the “remove” button is dimmed out.
>
>
>
> This is 4.22 ovirt node, but the host stays in a “non operational” state.
> I notice the logs have a lot of errors, for example:
>
>
>
>
>
> the SERVER log:
>
>
>
> 2018-05-02 14:40:23,847-07 WARN  [org.jboss.jca.core.
>