Hi,
Looks like you are using older version of gdeploy. Can you please specify
the gdeploy version?
On Wed, 1 Aug 2018, 12:55 a.m. Jayme, wrote:
> More info from the gdploy config:
>
> action=create
> devices=sda,sdb
> names=vdo_sda,vdo_sdb
> logicalsize=17000G,17000G
> blockmapcachesize=128M
>
Hi William,
You can now upload image (and ISO) using image-io.
You can find more information about it here -
https://www.ovirt.org/develop/release-management/features/storage/image-upload/
.
On Wed, Aug 1, 2018 at 5:58 AM, William Dossett
wrote:
> Hi,
>
>
>
> Before I go to the work of making
On Tue, Jul 31, 2018 at 9:46 PM, William Dossett
wrote:
> Blacklisting the disks in multipath.conf did the trick, all good now.
>
>
>
> When adding a new host, the process should run that blacklist all disks
> shell script like the cockpit deploy does… if I may be so bold to suggest
>
>
Once
Hi,
Before I go to the work of making my iso's available to the ovirt-engine so
I can use the iso uploader cli.
I haven't worked with ovirt for a while and the documents still refer to an
ISO domain and engine-iso-uploader the former which I understand is not
required now, just wondered if
I can see from the libvirt docs how to create a new network filter (to block
STP broadcasts in my case), but how do I add that filter to the vNIC list in
oVirt?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
I can see from the libvirt docs how to create a new network filter (to block
STP broadcasts in my case), but how do I add that filter to the vNIC list in
oVirt?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
Spent the better part of a day trying to figure out how to bridge OVN networks
with physical networks, only to later find out that "Attach to physical
network" has zero effect in a Legacy cluster... which started me down the
rabbit hole of "how do I switch the Default cluster to be OVS"
Then,
What do I mean by 'Hosts in Cluster B crashed':
I have (3) events (events during which I twinked with the Data Center A
network) during which I accumulated symptoms:
Event 1: A handful of the several dozen VMs in Cluster B Paused due to Storage
Issues. Restarted the VMs to restore service.
More info from the gdploy config:
action=create
devices=sda,sdb
names=vdo_sda,vdo_sdb
logicalsize=17000G,17000G
blockmapcachesize=128M
readcache=enabled
readcachesize=20M
emulate512=on
writepolicy=auto
ignore_vdo_errors=no
slabsize=32G,32G
action=create
devices=sda,sdb
names=vdo_sda,vdo_sdb
PLAY [gluster_servers]
*
TASK [Create VDO with specified size]
**
failed: [HOST] (item={u'disk': u'/dev/sda', u'logicalsize': u'17000G',
u'name': u'vdo_sda'}) => {"changed": false, "err": "usage: vdo
Thanks for responding.
Looks like we are using the first include option. We have lots of AD servers
around the world and latency never seems to be an issue. This option seems like
it would be fine for us but I did switch it to the recursive and that sped
things up drastically.
Thank you
Sorry for the slow reply, was out sick end of last week.
Thank you Nir! You have been very helpful in getting a grasp on this issue.
I have gone ahead and open an RFE for resuming on a Direct LUN:
https://bugzilla.redhat.com/show_bug.cgi?id=1610459
Thanks again!
Regards,
Ryan
On Tue, Jul
Hi,
oVirt support for DPDK was introduced in 2017[1], and is now enhanced in
terms of deployment via Ansible[2] and usage via OVN.
Compatible hosts and NICs can now be easily configured to use userspace
drivers, while usage is enhanced via OVN, allowing for both increased
performance and SDN
Blacklisting the disks in multipath.conf did the trick, all good now.
When adding a new host, the process should run that blacklist all disks shell
script like the cockpit deploy does… if I may be so bold to suggest
From: Jayme [mailto:jay...@gmail.com]
Sent: Tuesday, July 31, 2018
Try doing a multipath -ll and if that displays anything try flushing with
multipath -F
On Tue, Jul 31, 2018 at 10:55 AM, Gobinda Das wrote:
> Is the brick creation failing from UI? Can you run "gluster volume status"
> and check brick created or not?
> If bricks creation failing then Looks
Hi,
I don't know much about floppies, but looking at the API documentation[1]
and the code,
it seems that the API endpoint /api/vms/123/cdroms is only for cdroms and
not floppies.
Probably a floppy cannot be attached permanently to a VM. It can only be
specified when running the VM.
For example
Hi,
On Mon, Jul 30, 2018 at 06:47:40AM +, Alexis Enrrique Gavidia Albornoz
wrote:
> when the VM boots with the real GPU attached, the emulated QXL
> graphics gets disabled by windows itself., Moreover, you can
> install windows 7 running on QXL, then install the real GPU
> drivers and the
Is the brick creation failing from UI? Can you run "gluster volume status"
and check brick created or not?
If bricks creation failing then Looks like multipath is causing issue.I
think you need to clear multipath entries and try.
On Tue, Jul 31, 2018 at 7:01 PM, William Dossett
wrote:
> Yeah,
Can you connect to it with VNC? That was a new one on me … since last working
with this. Actually this is the first time I did hosted engine deploy as I
used to use a VM on my vmware infra to do it so had no idea I could connect to
the hosted engine console until Simone helped me.
Yeah, for sure, I think I made it over my last one yesterday…. Going to start
building out my storage today. I had to get down into the OS and work with the
logical volume manager commands a bit to clean up some of my mess and also
figured out how to blacklist the disks on my 4th and 5th host
I'm going to try a full rebuild again and see if I can get it working this
time. I will pay more attention to the networking and see if I can figure
out what is going on. How much more work does the scripts do after this
step I'm failing at? Is there any way to redeploy the engine without
On Tue, Jul 31, 2018 at 2:51 AM William Dossett
wrote:
> That happened to me twice… the second time I figure it out and it was
> networking.
>
>
>
> I am not familiar with the hosted-engine ---console…
>
The issue with the console device will be fixed for new deployment as for
HI all
How can I provide to my oVirt hosts a custom multipath.conf, considering
that we are using shared/mirrored FC storage from HPE 3PAR with high
availability of provided LUNs, using peer-persistance feature ?
To configure correctly this require a custom multipath.conf is required.
How I can
I think we are in a race to see who can get a new HCI setup built faster.
There have been a few hurtles along the way :)
On Tue, Jul 31, 2018, 6:53 AM Bill Dossett, wrote:
> Hmm, resounding silence…. Have attached a screen shot of the host storage
> devices on the host I added after the
Sure Andrej. Thanks.
I sent another mail for API issues :Mail Subject: API for attaching the ISO
image and virtual floppy disk to the VMCould you please check this also.
On Tue, Jul 31, 2018 at 4:15 PM, Andrej Krejcir wrote:
> Hi,
>
> Looking at the code, the disk statistics are only updated
Hi,
Looking at the code, the disk statistics are only updated when the VM is
running.
It looks like a bug. Could you open a Bugzilla ticket, so we can properly
fix it?
https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine
Set the component to: Backend.Core
And oVirt Team to: Virt
Hello,
I'm trying to test Memory balloon useful functionality, but l'm unable to make
it work successfuly.
Firstly, I enable the MOM on my Cluster:
Memory Balloon
Enable Memory Balloon Optimization
Secondly, I configure a VM virtual machine like this:
On system tab:
Memory Size : 28672 MB
Hello,
Mount the nfs share temporary in /mnt/chowned for example, and chown 36:36 the
directory solve my problem.
Thanks for all !
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Thanks, Idan. I know that export domain is deprecated. But for now, we're still
using it in our project.
And we need to know which one is the bootable disk of vm/template in export
domain for security checking.
Diskattachments link is available for vm in export domain, but templates miss
the
On Tue, Jul 31, 2018 at 9:20 AM Sven Achtelik
wrote:
> Hi Simone,
>
>
>
> the data dir for the upgrade seems to be only created during the upgrade
> and removed on failure. I can see it being generated during the process and
> disappear once it fails. Is
The API of the engine is specified by [1].
Specifically, what you're looking for is StorageDomainTemplateService [2].
However, I am not sure that it's worth adding features to the export domain
as I think that it's going to be (or already) deprecated.
Daniel/Tal?
Regards,
Idan
[1]
On 07/27/2018 01:59 AM, sipandb...@hotmail.com wrote:
I work at a company with a massive AD infrastructure. Is there any way to
specify a specific OU to search through instead of just providing a top level
DN? We use sssd for all our authing needs on our linux machines and would like
to do
32 matches
Mail list logo
