Hi.
I am an ovirt user in Korea. I am working on VDI. It's a pleasure to meet you,
the ovirt specialists.
(I do not speak English well... Thank you for your understanding!)
I am testing Lustre File System in Ovirt or RH(E)V environment.
(The reason is simple: glusterfs and nfs have limit of
Hi,
If possible, I would like to configure a hyperconverged cluster with hosts'
system partitions and the gluster's lvcache on partitions of SSDs in RAID1.
Is it possible to define the lvcache on a partitioned device like /dev/sdaX ;
or is it only supported to pass a whole device like /dev/sdb
Hi - I have just setup 3 hosts and I am running a self hosted engine on the
primary host - I am now trying to add the remaining two and my installs take
awhile and then fail.
Logs say ssh timeout, but the engine can get to the systems via DNS or hosts
file etc -
Any advice ?
Thanx guys,
Hi,
I made another short video tutorial (slide show with screenshots and
instruction) for beginners.
Explains how to add additional network interfaces (e.g. DMZ) to virtual
machines running under oVirt/KVM.
https://youtu.be/ij4uMv9N1wo
Best when viewed in full-screen mode at 1080p
Hi,
You can use the python SDK:
https://github.com/oVirt/ovirt-engine-sdk/blob/master/sdk/examples/list_vms.py
Regards,
Fred
On Wed, Oct 24, 2018 at 6:04 PM wrote:
> Hi,
>
> How can I list all VMs on the CLI?
>
> Thanks
>
> --
> --
> Jose Ferradeira
>
Hi Simone,
[root@host ~]# virsh -r net-dhcp-leases default
Expiry Time MAC addressProtocol IP address
HostnameClient ID or DUID
---
Dear Greg,
Here's my config, this is based on the original guide and some other stuff that
i found to help make it work.
Squid Cache: Version 3.5.20
https_port 443 accel key=/etc/squid/rescomp-vmgw.well.ox.ac.uk.proxy.key
cert=/etc/squid/rescomp-vmgw.well.ox.ac.uk.proxy.crt defaultsite=
On Wed, Oct 24, 2018 at 4:56 PM Brendan Holmes wrote:
> Hi Simone,
>
>
>
> My attempt to install the RPM output hundreds of lines similar to:
>
> /usr/lib/python2.7/site-packages/ovirt_hosted_engine_setup/__init__.pyc
> from install of ovirt-hosted-engine-setup-2.2.29-1.el7.noarch conflicts
>
Hi,
How can I list all VMs on the CLI?
Thanks
--
Jose Ferradeira
http://www.logicworks.pt
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Hi
oVirt 4.2.5.2-1.el7
I tried to delete an Illegal vm disk and that failed. Then I completely remove
the VM who had that broken disk. But task is stuck in the WebUI from my
previous disk deletion attempt
vdsm-client Host getAllTasksInfo on the SPM host, shows no tasks.
How do I clear the tasks
Yes, I have seen this guide. So my understanding is that you can add local
storage either through iSCSI, or through a local filesystem (this is the
storage directory you are referring to). There is no way to add a directly
attached block device (eg /dev/sdb). Is this correct?
The oVirt Project is pleased to announce the availability of the oVirt
4.2.7 Fourth Release Candidate, as of October 24th, 2018.
This update is a release candidate of the seventh in a series of
stabilization updates to the 4.2 series.
This is pre-release software. This pre-release should not to
Hi, guide for adding local storage is here:
https://www.ovirt.org/documentation/admin-guide/chap-Storage/#preparing-local-storage
I guess that main problem is the directory you want to add as storage:
*Important:* On oVirt Node, the path used for local storage must be
within the /var
Dear oVirt team,
My project with the company for Operations is a success and department is
successfully using oVirt 4.2.6 (started with 4.2.0 this January) platform with
SHE and 12 Hypervisors, hooked to GlusterFS distributed-replicated, managed
outside of oVirt. It is used for Support of
Hi, I have a 4.2 ovirt installation with the ovirt engine on one physical host
and two other physical hosts already successfully added in my "Hosts". I want
to use a local block device on one of the hosts for storage and I can't find
any guide on how to do that. I tried putting the host in
Can you please retry installing
https://jenkins.ovirt.org/job/ovirt-hosted-engine-setup_4.2_build-artifacts-el7-x86_64/157/artifact/exported-artifacts/ovirt-hosted-engine-setup-2.2.29-1.el7.noarch.rpm
and using it interactively without manually filing an answerfile?
On Tue, Oct 23, 2018 at 11:19
> Le 23 oct. 2018 à 16:30, Oliver Riesener a
> écrit :
>
> Yes, you are right, load 30 with a 2 CPU VM is nearly impossible.
>
Load on linux is a poor indicator, Brendan explan why:
http://www.brendangregg.com/blog/2017-08-08/linux-load-averages.html
Hi,
I am evaluating vdo for an hyperconverged ovirt cluster.
The volume is on RAID device supported by a LSI (Dell Perc H710) controller
with Write Back cache enabled :
Current Cache Policy: WriteBack, ReadAdaptive, Cached, Write Cache OK
However these LSI controllers (all PERC series on
18 matches
Mail list logo