[ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100 installation failed. Failed to configure managemen

hi please follow this blog https://www.linuxtechi.com/enable-nested-virtualization-kvm-centos-7-rhel-7/ Regards Hongyu Du From: wangyu13476969128 Date: 2019-08-21 11:32 To: users Subject: [ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface,

[ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100 installation failed. Failed to configure managemen

Hi Hongyu Du: How can I check if my virtual machine supports nx? [root@ovirt-node1 bin]# cat /proc/cpuinfo |grep nx flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush acpi mmx fxsr sse sse2 ht syscall nx pdpe1gb rdtscp lm constant_tsc rep_good nopl

[ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100 installation failed. Failed to configure managemen

hi wangyu your virtual machine need support nested virtual Regards Hongyu Du From: wangyu13476969128 Date: 2019-08-21 09:34 To: users Subject: [ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100

[ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100 installation failed. Failed to configure managemen

The content of vdsm.log on ovirt-node 1 is : libvirtError: invalid argument: KVM is not supported by '/usr/libexec/qemu-kvm' on this host 2019-08-21 09:17:48,329+0800 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call Host.getCapabilities failed (error -32603) in 0.07 seconds (__init__:312)

[ovirt-users] Re: VDSM ovirt-node-2 command Get Host Capabilities failed: Internal JSON-RPC error: {'reason': "invalid argument: KVM is not supported by '/usr/libexec/qemu-kvm' on this host"}

Hi Sandro Bonazzola: Where is the path to the SOS report file of ovirt-node-2 host? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: When I added the ovirt-node to the ovirt-engine through the web management interface, I get the following error: Host 172.16.41.100 installation failed. Failed to configure managemen

Thanks very much for Kaustav Majumder! Follow the steps you taught me： 1. Server1 install ovirt-engine 2. Server2 install ovirt-node 3. Set bridge network using the link on ovirt-node ( https://www.ovirt.org/develop/developer-guide/vdsm/installing-vdsm-from-r... ) 4. Add ovirt-node to

[ovirt-users] Re: Hyperconverged setup ovirt 4.3.x using ansible?

Thanks, I am researching and looks promising... ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:

[ovirt-users] Re: engine.log flooded with "Field 'foo' can not be updated when status is 'Up'"

Hello, there also seems to be a lot of queries send to the engine database, this is the problem I had with 70 VMs in compatibility mode as this really slowed the admin portal down while querying running VM's for instance. Regards, Paul S.

[ovirt-users] hosted engine setup, iSCSI no LUNs shown

I'm trying to setup the hosted engine on top of iSCSI storage. It successfully logs in and gets the target, however the process errors out claiming there are no LUNs. But if you look on the host, the disks were added to the system. [ INFO ] TASK [ovirt.hosted_engine_setup : iSCSI discover with

[ovirt-users] Re: ovirt node install

same result on 4.3.6-rc1, and the manual update to ovirt-node-ng-nodectl noarch 4.4.0-0.20190820.0.el7 fixes it there. Didn't try it on the 'production' 4.3.5 variant, but would assume it works there, too. ___ Users mailing list -- users@ovirt.org To

[ovirt-users] Re: ovn networking

On Mon, Aug 19, 2019 at 12:47 PM Staniforth, Paul wrote: > > Thanks Miguel, > I'm using openvswitch-ovn-common-2.11.0-4.el7.x86_64 I hoped this would be gone in version 2.11, but, seems like the openvswitch build hasn't been updated for quite some time (2019-03-20).

[ovirt-users] Re: numa pinning for high performance

Hi, Sorry for the late reply. The recommended setting for High Performance VMs is generally depended on many parameters and on what your VM is required to do (I/O or compute load), but generally and based on the setting that you sent then I have few comments for configuration tuning: -

[ovirt-users] Re: Need to enable STP on ovirt bridges

I can see, just through a series of searches, that you can configure ovirt to use a variety of things. I've configured many VMWare clusters before, so having a (Cisco calls them) trunked port or (what other people call them) ports in "tagged mode" would be nice, but like I was saying: I can't even

[ovirt-users] Re: engine.log flooded with "Field 'foo' can not be updated when status is 'Up'"

Hi, @Ryan Barry , @Lucia Jelinkova - is the possible to fix Bug 1742924 earlier than oVirt 4.4 release? If the fix involves only removing the warning from the log, then it seems like a pretty quick fix... Thanks, Sharon On Tue, Aug 20, 2019

[ovirt-users] Re: Need to enable STP on ovirt bridges

Oh, I'm just using the standard Linux bridges. I believe in ovirt nomenclature they're called "legacy bridges". This is not by any real choice but just what is created by default, I believe. In the first link you sent, they are calling them "Linux legacy networking model" - though I only have 2

[ovirt-users] Re: Need to enable STP on ovirt bridges

No - no recommendations from me to use either. I took it that you were using ovs bridge as I was not aware of another bridge. The only other option I was aware of if what I am using, vlan interfaces and kernel vlan tags. If you could share a link to what you're using, I would be keen to read up on

[ovirt-users] Re: Need to enable STP on ovirt bridges

Tony, Well, thank you for that, but I'm not using openvswitchs, I'm just using regular bridges. Are you suggesting that I do? >From what I can see in the interface they have "(experimental)" marked on them and we'd like to see production with this at some point. None of my ports are trunking

[ovirt-users] Re: engine.log flooded with "Field 'foo' can not be updated when status is 'Up'"

Hello Sharon, I had a look on the bug report and it says, that this fix is targeted for oVirt 4.4. This would be really bad for us, because I have hundreds of VMs, which can't be restarted so easily (over 500) and this would break then our engine... This would make it impossible for us to

[ovirt-users] Re: Export as OVA fails

On Tue, Aug 20, 2019 at 2:10 AM wrote: > Hi. > > We are running oVirt 4.3.4 with each of the hosts configured to use local > storage. > > When I attempt to export a large virtual machine as an OVA the process > begins but fails about half an hour later. > > On the oVirt Events page the following