Can anyone point out if this
"https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infrastructure_for_virtualization/1.6/html-single/automating_rhhi_for_virtualization_deployment/index;
works for a 3 node hyperconverged setup in ovirt?
I have tried it and seems that every time I
>>>Congratulations
LOL, yes That's just about right. I'd say I agree with you. The language
used in the error output wasn't real clear to me either. I'll have to add
something in the docs that say:
***WARNING/*** Fencing will not work on a single host. You must have at least
2
Congratulations.. in my case I fail to see that message on the logs quite
some time ago so I normally do two or more hosts and then do fencing.
On Sun, Oct 20, 2019, 3:37 PM wrote:
> Oh wait! Now I see what you mean:
> Test failed: Failed to run fence status-check on host
>
I believe without the inclusion of a developer on this thread it makes
sense not to work with a single host because if you're trying to test
fencing (via the power management setup) then how the host will fence
itself and validate it. This of course when testing with a single host.
I believe the
Oh wait! Now I see what you mean:
Test failed: Failed to run fence status-check on host 'vmh.cyber-range.lan'. No
other host was available to serve as proxy for the operation.
The 2nd host would be the proxy... Well bummer.
___
Users mailing list --
No just a single host. I didn't see any documentation that said you need two
or more hosts. You could be right.
I did some further testing by installing ipmitool on my laptop.
[root@lt ~]# ipmitool -v -I lanplus -H 172.30.50.2 -U ADMIN session info all
Password:
session handle
You need to have two hosts up and running and members of same ovirt setup.
It seems when you set up fencing, one host perform the test on the other
one.
in my Case I never been able to perform fencing setup properly unless I
have a minimum of two nodes working.
I use Tyan servers. Same
I did totally remove that value. It still fails.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
I tried lanplus=0 and totally removing it. The result is the same, test failed.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of
Try switching off the lanplus (maybe remove it at all).
Best Regards,
Strahil NikolovOn Oct 20, 2019 20:14, jeremy_tourvi...@hotmail.com wrote:
>
> I am trying to setup my power management fencing agent on the host.
>
> Address: I put in the IP address of the web page for IPMI. (Which does
I am trying to setup my power management fencing agent on the host.
Address: I put in the IP address of the web page for IPMI. (Which does work
via my web browser without issue)
Username: ADMIN
PW: my_password
Type: ipmilan
Options: lanplus=1
I click on the test button and it fails.
Board
I have built a new host and my setup is a single hyperconverged node.. I
followed the directions to create a new logical network. I see that the engine
has marked the network as being down. (Hosts>Network Interfaces Tab>Setup Host
Networks)
Here is my network config on the host-
[root@vmh
12 matches
Mail list logo
