[ovirt-users] Re: Move Hosted Engine VM to a different storage domain

2020-04-28 Thread Anton Louw
Hi, Thank you for the reply. I am building another environment today, so I will run through the backup and restore again. I do recall one issue I had with the restore was that it gave an error that one of the storage domains were already in use. This was a new storage domain I added, with no

[ovirt-users] User Groups

2020-04-28 Thread Anton Louw
Hi Everybody, Is there a way to see My Groups through the Web UI? I have tried looking around, but cannot see anything. Can this only be seen via the backend in the HE? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M:

[ovirt-users] Re: Gluster deployment fails with missing UUID

2020-04-28 Thread Jayme
Has the drive been used before, it might have existing partition/filesystem on it? If you are sure it's fine to overwrite try running wipefs -a /dev/sdb on all hosts. Also make sure there aren't any filters setup in lvm.conf (there shouldn't be on fresh install, but worth checking). On Tue, Apr

[ovirt-users] Gluster deployment fails with missing UUID

2020-04-28 Thread Shareef Jalloq
Hi, I'm running the gluster deployment flow and am trying to use a second drive as the gluster volume. It's /dev/sdb on each node and I'm using the JBOD mode. I'm seeing the following gluster ansible task fail and a google search doesn't bring up much. TASK [gluster.infra/roles/backend_setup :

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Shareef Jalloq
OK, that's got it, thanks. I really need to put some effort in sharpening my networking knowledge. On Tue, Apr 28, 2020 at 11:20 PM Jayme wrote: > Oh and also gluster interface should not be set as default route either. > > On Tue, Apr 28, 2020 at 7:19 PM Jayme wrote: > >> On gluster

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Jayme
Oh and also gluster interface should not be set as default route either. On Tue, Apr 28, 2020 at 7:19 PM Jayme wrote: > On gluster interface try setting gateway to 10.0.1.1 > > If that doesn’t work let us know where the process is failing currently > and with what errors etc. > > On Tue, Apr

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Jayme
On gluster interface try setting gateway to 10.0.1.1 If that doesn’t work let us know where the process is failing currently and with what errors etc. On Tue, Apr 28, 2020 at 6:54 PM Shareef Jalloq wrote: > Thanks. I have the DNS but must have my interface config wrong. On my > first node I

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Strahil Nikolov
Hey Shareef, if you have slow ssh login - check the A/ & PTR records of both ssh client. By default ssh is checking the PTR record of the client and this can take some time to timeout (and reach a good dns or fail). Also, you could have issues with 7.3 systems - as systemd is not cleaning

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Shareef Jalloq
Thanks. I have the DNS but must have my interface config wrong. On my first node I have two interfaces in use, em1 for the management interface and p1p1 for the Gluster interface. [root@ovirt-node-00 ~]# cat /etc/sysconfig/network-scripts/ifcfg-em1 TYPE=Ethernet PROXY_METHOD=none

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Jayme
You should use host names for gluster like gluster1.hostname.com that resolve to the ip chosen for gluster. For my env I have something like this: Server0: Host0.example.com 10.10.0.100 Gluster0.example.com 10.0.1.100 Same thing for other two severs except hostnames and ips of course. Use the

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Shareef Jalloq
Perhaps it's me, but these two documents seem to disagree on what hostnames to use when setting up. Can someone clarify. The main documentation here: https://www.ovirt.org/documentation/gluster-hyperconverged/chap-Deploying_Hyperconverged.html talks about copying the SSH keys to the gluster host

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Shareef Jalloq
OK, thanks both, that seems to have fixed that issue. Is there any other config I need to do because the next step in the deployment guide of copying SSH keys seems to take over a minute just to prompt for a password. Something smells here. On Tue, Apr 28, 2020 at 7:32 PM Jayme wrote: > You

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Jayme
You should be using a different subnet for each. I.e. 10.0.0.30 and 10.0.1.30 for example On Tue, Apr 28, 2020 at 2:49 PM Shareef Jalloq wrote: > Hi, > > I'm in the process of trying to set up an HCI 3 node cluster in my homelab > to better understand the Gluster setup and have failed at the

[ovirt-users] Re: Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Strahil Nikolov
On April 28, 2020 8:46:39 PM GMT+03:00, Shareef Jalloq wrote: >Hi, > >I'm in the process of trying to set up an HCI 3 node cluster in my >homelab >to better understand the Gluster setup and have failed at the first >hurdle. >I've set up the node interfaces on the built in NIC and am using a PCI

[ovirt-users] Can't ping gluster interfaces for HCI setup

2020-04-28 Thread Shareef Jalloq
Hi, I'm in the process of trying to set up an HCI 3 node cluster in my homelab to better understand the Gluster setup and have failed at the first hurdle. I've set up the node interfaces on the built in NIC and am using a PCI NIC for the Gluster traffic - at the moment this is 1Gb until I can

[ovirt-users] Re: Can't deploy engine vm with ovirt-hosted-engine-setup

2020-04-28 Thread Sandro Bonazzola
Il giorno lun 6 apr 2020 alle ore 21:55 Gabriel Bueno ha scritto: > Hi, > I'm trying deploy an engine vm with ovirt-hosted-engine-setup. > After the storage domain configuration, the setup exits with the error: > > [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_vms": >

[ovirt-users] Re: Upgrade scenario to 4.4 for HCI Gluster

2020-04-28 Thread Sandro Bonazzola
Adding +Lev Veyde , +Steve Goodman , +Evgeny Slutsky and +Gobinda Das for awareness Il giorno sab 18 apr 2020 alle ore 13:03 Gianluca Cecchi < gianluca.cec...@gmail.com> ha scritto: > Hello, > I saw from some mails in the list that the approach for upgrading from 4.3 > to 4.4 will be

[ovirt-users] Re: [OT] windows 10 qemu-kvm latest stable drivers

2020-04-28 Thread Sandro Bonazzola
Il giorno mer 22 apr 2020 alle ore 18:48 Gianluca Cecchi < gianluca.cec...@gmail.com> ha scritto: > Hello, > I see that this link below, that should be the correct one for stable > virtio drivers: > > > https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/stable-virtio/virtio-win.iso

[ovirt-users] Re: Wrong CPU type recognized on a new Pentium G4560 Kaby Lake

2020-04-28 Thread Sandro Bonazzola
Il giorno mar 28 apr 2020 alle ore 10:09 ha scritto: > Hi, > I installed an ovirt node based on latest 4.3.9 iso on this hardware: > > CPU Intel Pentium G4560 > Motherboard Asus P10S-i C232 Chipset > > Overall setup has no problem but I noticed that the CPU type is recognized > as: > > Intel

[ovirt-users] [ANN] oVirt 4.3.10 Second Release Candidate is now available for testing

2020-04-28 Thread Lev Veyde
The oVirt Project is pleased to announce the availability of oVirt 4.3.10 Second Release Candidate for testing as of April 28th, 2020. This update is the tenth in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat

[ovirt-users] Re: Info about openstack staging-ovirt driver connection not released

2020-04-28 Thread Gianluca Cecchi
On Tue, Apr 28, 2020 at 11:40 AM Gianluca Cecchi wrote: > On Tue, Apr 28, 2020 at 11:18 AM Luca 'remix_tj' Lorenzetto < > lorenzetto.l...@gmail.com> wrote: > >> Hello Gianluca, >> >> did you tried contacting the RDO team which is responsible of that >> package? If is an easy fix, they can commit

[ovirt-users] Re: Info about openstack staging-ovirt driver connection not released

2020-04-28 Thread Gianluca Cecchi
On Tue, Apr 28, 2020 at 11:18 AM Luca 'remix_tj' Lorenzetto < lorenzetto.l...@gmail.com> wrote: > Hello Gianluca, > > did you tried contacting the RDO team which is responsible of that > package? If is an easy fix, they can commit (or help you committing) > directly in Openstack. > > Luca > > I

[ovirt-users] Re: Info about openstack staging-ovirt driver connection not released

2020-04-28 Thread Luca 'remix_tj' Lorenzetto
Hello Gianluca, did you tried contacting the RDO team which is responsible of that package? If is an easy fix, they can commit (or help you committing) directly in Openstack. Luca On Mon, Apr 27, 2020 at 10:33 PM Gianluca Cecchi wrote: > > On Sun, Apr 26, 2020 at 1:19 PM Gianluca Cecchi >

[ovirt-users] Wrong CPU type recognized on a new Pentium G4560 Kaby Lake

2020-04-28 Thread mleone87
Hi, I installed an ovirt node based on latest 4.3.9 iso on this hardware: CPU Intel Pentium G4560 Motherboard Asus P10S-i C232 Chipset Overall setup has no problem but I noticed that the CPU type is recognized as: Intel Westmere IBRS SSBD MDS Family The overall system info are: OS Version: