[ovirt-users] Re: where is error log for OVA import

2020-07-28 Thread Simon Coter
should be /var/log/vdsm/import (on KVM host) for VMs and 
/var/log/ovirt-engine/ova (on engine host) for Templates

> On Jul 29, 2020, at 1:20 AM, Jayme  wrote:
> 
> Check engine.log in /var/log/ovirt-engine on the engine sever/vm
> 
> On Tue, Jul 28, 2020 at 7:16 PM Philip Brown  > wrote:
> I just tried to import an OVA file.
> The GUI status mentions that things seem to go along fairly happily.. 
> it mentions that it creates a disk for it
> but then eventually just says
> 
> "failed to import VM x into datacenter Default"
> with zero explanation.
> 
> Isnt there a log file or something I can check, somewhere, to find out what 
> the problem is?
> 
> 
> --
> Philip Brown| Sr. Linux System Administrator | Medata, Inc. 
> 5 Peters Canyon Rd Suite 250 
> Irvine CA 92606 
> Office 714.918.1310| Fax 714.918.1325 
> pbr...@medata.com | www.medata.com 
> 
> ___
> Users mailing list -- users@ovirt.org 
> To unsubscribe send an email to users-le...@ovirt.org 
> 
> Privacy Statement: https://www.ovirt.org/privacy-policy.html 
> 
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/ 
> 
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5UDCY3OHJBL7VEYUWHAZQEQHFZ6SOIK6/
>  
> 
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/PQAYC3XPOYZG4G26PIETNBPAUDRET4VO/

___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CKYIN6QIU3VBST7ISF5DDBZO5L5W76HN/


[ovirt-users] Re: where is error log for OVA import

2020-07-28 Thread Philip Brown
Thanks for the reply.

I did manage to dig that one up. but.. doesnt seem to have any specifics either 
:(
It just contains an xml description of the OVA info.
Zero status output good or bad.

If it makes any difference, the OVA was generated by VMware 4.x


Last few lines in the logfile are as follows

^M
^M
  A human-readable annotation^M
  racktables VM^M
^M
  ^M
   }


and thats all!




- Original Message -
From: "Jayme" 
To: "Philip Brown" 
Cc: "users" 
Sent: Tuesday, July 28, 2020 4:20:05 PM
Subject: Re: [ovirt-users] where is error log for OVA import

Check engine.log in /var/log/ovirt-engine on the engine sever/vm

On Tue, Jul 28, 2020 at 7:16 PM Philip Brown  wrote:

> I just tried to import an OVA file.
> The GUI status mentions that things seem to go along fairly happily..
> it mentions that it creates a disk for it
> but then eventually just says
>
> "failed to import VM x into datacenter Default"
> with zero explanation.
>
> Isnt there a log file or something I can check, somewhere, to find out
> what the problem is?
>
>
> --
> Philip Brown| Sr. Linux System Administrator | Medata, Inc.
> 5 Peters Canyon Rd Suite 250
> Irvine CA 92606
> Office 714.918.1310| Fax 714.918.1325
> pbr...@medata.com| www.medata.com
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5UDCY3OHJBL7VEYUWHAZQEQHFZ6SOIK6/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/FCSNZQ73M46SUV3PT73FCKPWG27R2YDO/


[ovirt-users] Re: where is error log for OVA import

2020-07-28 Thread Jayme
Check engine.log in /var/log/ovirt-engine on the engine sever/vm

On Tue, Jul 28, 2020 at 7:16 PM Philip Brown  wrote:

> I just tried to import an OVA file.
> The GUI status mentions that things seem to go along fairly happily..
> it mentions that it creates a disk for it
> but then eventually just says
>
> "failed to import VM x into datacenter Default"
> with zero explanation.
>
> Isnt there a log file or something I can check, somewhere, to find out
> what the problem is?
>
>
> --
> Philip Brown| Sr. Linux System Administrator | Medata, Inc.
> 5 Peters Canyon Rd Suite 250
> Irvine CA 92606
> Office 714.918.1310| Fax 714.918.1325
> pbr...@medata.com| www.medata.com
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5UDCY3OHJBL7VEYUWHAZQEQHFZ6SOIK6/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PQAYC3XPOYZG4G26PIETNBPAUDRET4VO/


[ovirt-users] where is error log for OVA import

2020-07-28 Thread Philip Brown
I just tried to import an OVA file.
The GUI status mentions that things seem to go along fairly happily.. 
it mentions that it creates a disk for it
but then eventually just says

"failed to import VM x into datacenter Default"
with zero explanation.

Isnt there a log file or something I can check, somewhere, to find out what the 
problem is?


--
Philip Brown| Sr. Linux System Administrator | Medata, Inc. 
5 Peters Canyon Rd Suite 250 
Irvine CA 92606 
Office 714.918.1310| Fax 714.918.1325 
pbr...@medata.com| www.medata.com
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5UDCY3OHJBL7VEYUWHAZQEQHFZ6SOIK6/


[ovirt-users] Re: New ovirt 4.4.0.3-1.el8 leaves disks in illegal state on all snapshot actions

2020-07-28 Thread Henri Aanstoot
Hi,

Ended up reinstalling everything manual, not using the ovirt node iso's
Non of the combinations/versions/manual playbook upgrades worked for me.
Installed as i used to do previously ,am a happy camper again.
untarred old ova's, imported disks .. up and running again

Henri


On Mon, 27 Jul 2020 at 15:45, h aanst  wrote:

> Hi,
>
> Removed everything .. reinstall with images
>
> Hitting know bug
> [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed":
> false, "msg": "The Python 2 yum module is needed for this module. If you
> require Python 3 support use the `dnf` Ansible module instead."}
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1858234
>
> clean installs with
> ovirt-node-ng-installer-4.4.1-2020071311.el8.iso
> ovirt-node-ng-installer-4.4.1-2020070811.el8.iso
>
> 4.4.0 install would not upgrade .. how to install now?
>
> any advice?
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/JE6BD4EWH2MKNNO2M4NDOZPI47GUTNO5/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4U7KBPOTT3CQC2PFFT563NSRG5CC6NO5/


[ovirt-users] Re: Issue with ovirt 4.4 after doing some incremental backups.

2020-07-28 Thread Eyal Shenitzky
Hi Łukasz,

Can you please provide vdsm.log and libvirt.log?

On Tue, 28 Jul 2020 at 16:05, Łukasz Kołaciński 
wrote:

> Hello,
>
> After doing a few vm backups, something breaks and I am unable to perform
> any operations. I cannot do incremental backups and even full backups
> doesn't work. I have this issue third time. I don't know how to fix this so
> I am currently making new vms for testing purposes
>
> VDSM ovirt44-h2.storware.local command StartVmBackupVDS failed: Backup
> Error: {'vm_id': '116aa6eb-31a1-43db-9b1e-ad6e32fb9260', 'backup':
> , 'reason': "Error
> starting backup: internal error: unable to execute QEMU command
> 'transaction': Dirty bitmap 'ef0dfe55-c08c-4d9e-ad32-d6b6d5cbdac6' not
> found"}
>
>
> Best Regards,
>
> Łukasz Kołaciński
>
> Junior Java Developer
>
> e-mail: l.kolacin...@storware.eu
> 
>
>
>
>
> *[image: STORWARE]* 
>
>
>
> *ul. Leszno 8/44 01-192 Warszawa www.storware.eu
> *
>
> *[image: facebook]* 
>
> *[image: twitter]* 
>
> *[image: linkedin]* 
>
> *[image: Storware_Stopka_09]*
> 
>
>
>
> *Storware Spółka z o.o. nr wpisu do ewidencji KRS dla M.St. Warszawa
> 000510131* *, NIP 5213672602.** Wiadomość ta jest przeznaczona jedynie
> dla osoby lub podmiotu, który jest jej adresatem i może zawierać poufne
> i/lub uprzywilejowane informacje. Zakazane jest jakiekolwiek przeglądanie,
> przesyłanie, rozpowszechnianie lub inne wykorzystanie tych informacji lub
> podjęcie jakichkolwiek działań odnośnie tych informacji przez osoby lub
> podmioty inne niż zamierzony adresat. Jeżeli Państwo otrzymali przez
> pomyłkę tę informację prosimy o poinformowanie o tym nadawcy i usunięcie
> tej wiadomości z wszelkich komputerów. **This message is intended only
> for the person or entity to which it is addressed and may contain
> confidential and/or privileged material. Any review, retransmission,
> dissemination or other use of, or taking of any action in reliance upon,
> this information by persons or entities other than the intended recipient
> is prohibited. If you have received this message in error, please contact
> the sender and remove the material from all of your computer systems.*
>
>

-- 
Regards,
Eyal Shenitzky
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2IYQDJONJDFZVRCAX4Y4GZFLEO5Z3FZI/


[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Staniforth, Paul


Yes you could use affinity labels, can you remove hosts without breaking 
affinity? I had to set the affinity to soft/not enforcing when doing 
maintenance on hosts.

The only way to bulk add hosts is via the API/SDK.

The easiest would be ansible.

https://docs.ansible.com/ansible/latest/modules/ovirt_affinity_group_module.html#ovirt-affinity-group-module


https://docs.ansible.com/ansible/latest/modules/ovirt_affinity_label_module.html#ovirt-affinity-label-module



Regards,
  Paul S.

From: Alan G 
Sent: 28 July 2020 13:02
To: Nardus Geldenhuys 
Cc: Staniforth, Paul ; users@ovirt.org 

Subject: Re: [ovirt-users] Re: affinity/pool/fencing ?


Caution External Mail: Do not click any links or open any attachments unless 
you trust the sender and know that the content is safe.

You might find affinity labels are a better fit in this use case. It would 
allow you to add/remove/move hosts in the future much more quickly than hard 
coding affinity. But that still leaves the bulk configuration tasks.

The only way to do this quickly is with the REST API or one of the SDKs that 
leverage it.

You'd create the affinity labels in the web UI then assign the VMs using the 
API.


 On Tue, 28 Jul 2020 12:43:43 +0100 Nardus Geldenhuys 
mailto:nard...@gmail.com>> wrote 

Hi Paul

Thanks for the response, easy way to add 100 VM's in your second step ?

Regards

Nar

On Tue, 28 Jul 2020 at 13:17, Staniforth, Paul 
mailto:p.stanifo...@leedsbeckett.ac.uk>> wrote:
Hello Nar,
   you can achieve this with 2 affinity rules, a positive and 
negative one.

In the cluster create the first affinity group VM affinity rule disabled HOST 
affinity rule positive  set enforcing mode. Then add the VMs and 2 Hosts to 
force them to run on these hosts.

In the cluster create the second affinity group VM affinity rule disabled  HOST 
affinity rule negative set enforcing mode. Then add the rest of the VMs and the 
2 Hosts to force them not to run on these hosts.

https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html


Regards,

 Paul S.




From: Nardus Geldenhuys mailto:nard...@gmail.com>>
Sent: 28 July 2020 11:22
To: users@ovirt.org 
mailto:users@ovirt.org>>
Subject: [ovirt-users] affinity/pool/fencing ?


Caution External Mail: Do not click any links or open any attachments unless 
you trust the sender and know that the content is safe.

Hi oVirt land

Hope you are well. Don't even know what to call this. But let me describe what 
I want to achieve.

We have a cluster with say 100 vm's. But we want two use two hosts in the 
cluster two run only certain VM's. I think you can do that with affinity rules. 
But how can I restrict those two hosts to only run the VM's, meaning that no 
other VM's will run on them.

I don't want to go and edit the 100 other VM's to not run on 2 hosts. Is there 
an easy way for doing this?

Oracle VM uses pools, I dont know what vmware uses.

Any advice will help.

Regards

Nar
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to 
users-le...@ovirt.org
Privacy Statement: 
https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 

[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Alan G
You might find affinity labels are a better fit in this use case. It would 
allow you to add/remove/move hosts in the future much more quickly than hard 
coding affinity. But that still leaves the bulk configuration tasks.

The only way to do this quickly is with the REST API or one of the SDKs that 
leverage it.

You'd create the affinity labels in the web UI then assign the VMs using the 
API.


 On Tue, 28 Jul 2020 12:43:43 +0100 Nardus Geldenhuys 
 wrote 


Hi Paul

Thanks for the response, easy way to add 100 VM's in your second step ?



Regards



Nar



On Tue, 28 Jul 2020 at 13:17, Staniforth, Paul 
 wrote:

Hello Nar,

   you can achieve this with 2 affinity rules, a positive and 
negative one.



In the cluster create the first affinity group VM affinity rule disabled HOST 
affinity rule positive  set enforcing mode. Then add the VMs and 2 Hosts to 
force them to run on these hosts.



In the cluster create the second affinity group VM affinity rule disabled  HOST 
affinity rule negative set enforcing mode. Then add the rest of the VMs and the 
2 Hosts to force them not to run on these hosts.



https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html





Regards,



 Paul S.








From: Nardus Geldenhuys 
 Sent: 28 July 2020 11:22
 To: mailto:users@ovirt.org 
 Subject: [ovirt-users] affinity/pool/fencing ?  


Caution External Mail: Do not click any links or open any attachments unless 
you trust the sender and know that the content is safe.

Hi oVirt land 

Hope you are well. Don't even know what to call this. But let me describe what 
I want to achieve.



We have a cluster with say 100 vm's. But we want two use two hosts in the 
cluster two run only certain VM's. I think you can do that with affinity rules. 
But how can I restrict those two hosts to only run the VM's, meaning that no 
other VM's will run on
 them.



I don't want to go and edit the 100 other VM's to not run on 2 hosts. Is there 
an easy way for doing this?



Oracle VM uses pools, I dont know what vmware uses.



Any advice will help.



Regards



Nar




To view the terms under which this email is distributed, please go to:-
 http://leedsbeckett.ac.uk/disclaimer/email/ 




___
Users mailing list -- mailto:users@ovirt.org
To unsubscribe send an email to mailto:users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4V4DW7HI375CW4G75NJW3TIMNAZCP4NR/___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZQD2CKQRZONDZL5EV7DD2LS2LD3CDQF3/


[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Nardus Geldenhuys
Hi Paul

Thanks for the response, easy way to add 100 VM's in your second step ?

Regards

Nar

On Tue, 28 Jul 2020 at 13:17, Staniforth, Paul <
p.stanifo...@leedsbeckett.ac.uk> wrote:

> Hello Nar,
>you can achieve this with 2 affinity rules, a positive
> and negative one.
>
> In the cluster create the first affinity group VM affinity rule disabled
> HOST affinity rule positive  set enforcing mode. Then add the VMs and 2
> Hosts to force them to run on these hosts.
>
> In the cluster create the second affinity group VM affinity rule disabled
> HOST affinity rule negative set enforcing mode. Then add the rest of the
> VMs and the 2 Hosts to force them not to run on these hosts.
>
>
> https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html
>
>
> Regards,
>
>  Paul S.
>
>
> --
> *From:* Nardus Geldenhuys 
> *Sent:* 28 July 2020 11:22
> *To:* users@ovirt.org 
> *Subject:* [ovirt-users] affinity/pool/fencing ?
>
>
> *Caution External Mail:* Do not click any links or open any attachments
> unless you trust the sender and know that the content is safe.
> Hi oVirt land
>
> Hope you are well. Don't even know what to call this. But let me describe
> what I want to achieve.
>
> We have a cluster with say 100 vm's. But we want two use two hosts in the
> cluster two run only certain VM's. I think you can do that with affinity
> rules. But how can I restrict those two hosts to only run the VM's, meaning
> that no other VM's will run on them.
>
> I don't want to go and edit the 100 other VM's to not run on 2 hosts. Is
> there an easy way for doing this?
>
> Oracle VM uses pools, I dont know what vmware uses.
>
> Any advice will help.
>
> Regards
>
> Nar
> To view the terms under which this email is distributed, please go to:-
> http://leedsbeckett.ac.uk/disclaimer/email/
>
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/4V4DW7HI375CW4G75NJW3TIMNAZCP4NR/


[ovirt-users] Re: iSCSI multipath issue

2020-07-28 Thread Amit Bawer
On Tue, Jul 28, 2020 at 8:56 AM Nick Kas via Users  wrote:

> Hello evryone,
> setup ovirt 4.4.1 on CentOS 8.2 as an experiment, and I am trying to get
> an iSCSI domain working but have issues. The little experimental cluster
> has 3 hosts. There is an ovirtmgmt network on the default vlan, and two
> iSCSI network (172.27.0/1.X) with vlans 20/21. ovirtmgmt has all the
> functions (Data, display, migration etc), and the iSCSI networks nothing
> yet, and they are not set as required.
> The SAN device is already serving a few iSCSI volumes to a vmware cluster,
> so I know things are fine on this end. It has two controllers, and four
> NICs per controller so a total of 8 NICs, half of the NICS per controller
> on 172.27.0.X and half on 172.27.1.X.
>
> When I create the iSCSI domain, I login to only one of the targets, and
> add the Volume, all is good and I can use the disc fine.
> However when I login to more than one of the targets, then I start having
> issues with the Volume. Even when I enabled multipath in the cluster, and I
> created a single multipath by selecting both of the 172.27.0/1.X networks,
> and all the targets, the end result was the same. The hosts have difficulty
> accessing the volume, they may even swing between 'non-operational' and
> 'up' if I transfer data to the volume. When I ssh to the hosts and i check
> things in the command line I also get inconsistent results between hosts,
> and blocks that appear with lsblk when I first setup iSCSI have dissapeared
> after I try to actively use the volume.
>
maybe /var/log/vdsm/vdsm.log could tell more.

>
> I am new to iSCSI so I am not sure how to debug this. I am not sure if my
> multipath configuration is correct or not. The documentation on this part
> was not very detailed. I also tried to remove the domain, and try to
> experiment with mounting the iSCSI volume from the command line, but I
> cannot even discover the target from the command line, which is very
> bizarre. The command
> iscsiadm --mode discovery --target sendtargets --portal 172.27.0.55
> --discover
>
you are mixing "--target" with "--type", should be:
iscsiadm --mode discovery --type sendtargets --portal 172.27.0.55
--interface default

> returns the message 'iscsiadm: cannot make connection to 172.27.0.55: No
> route to host'. Yet through ovirt, and if I select only one target,
> everything work fine!
>
> Any suggestions on how to start debugging this would really be appreciated.
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/N5DNXQ5MAMPXMA3LOHM4RHUZLYKUUMLO/
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/B5BISBNF273PDSQTNQRC7DPMOIWWM53A/


[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Staniforth, Paul
Hello Nar,
   you can achieve this with 2 affinity rules, a positive and 
negative one.

In the cluster create the first affinity group VM affinity rule disabled HOST 
affinity rule positive  set enforcing mode. Then add the VMs and 2 Hosts to 
force them to run on these hosts.

In the cluster create the second affinity group VM affinity rule disabled  HOST 
affinity rule negative set enforcing mode. Then add the rest of the VMs and the 
2 Hosts to force them not to run on these hosts.

https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html


Regards,

 Paul S.



From: Nardus Geldenhuys 
Sent: 28 July 2020 11:22
To: users@ovirt.org 
Subject: [ovirt-users] affinity/pool/fencing ?


Caution External Mail: Do not click any links or open any attachments unless 
you trust the sender and know that the content is safe.

Hi oVirt land

Hope you are well. Don't even know what to call this. But let me describe what 
I want to achieve.

We have a cluster with say 100 vm's. But we want two use two hosts in the 
cluster two run only certain VM's. I think you can do that with affinity rules. 
But how can I restrict those two hosts to only run the VM's, meaning that no 
other VM's will run on them.

I don't want to go and edit the 100 other VM's to not run on 2 hosts. Is there 
an easy way for doing this?

Oracle VM uses pools, I dont know what vmware uses.

Any advice will help.

Regards

Nar
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/N3RGAVBZ4DGI2Z24PK3QSA4VAJPEC6JD/


[ovirt-users] affinity/pool/fencing ?

2020-07-28 Thread Nardus Geldenhuys
Hi oVirt land

Hope you are well. Don't even know what to call this. But let me describe
what I want to achieve.

We have a cluster with say 100 vm's. But we want two use two hosts in the
cluster two run only certain VM's. I think you can do that with affinity
rules. But how can I restrict those two hosts to only run the VM's, meaning
that no other VM's will run on them.

I don't want to go and edit the 100 other VM's to not run on 2 hosts. Is
there an easy way for doing this?

Oracle VM uses pools, I dont know what vmware uses.

Any advice will help.

Regards

Nar
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/Z6A6ZQKI67UYKG5A5NBMBE7GYQFDWQYI/


[ovirt-users] Re: [rhev-tech] ovirt-imageio-proxy not working after updating SSL certificates with a wildcard cert issued by AlphaSSL (intermediate)

2020-07-28 Thread Yedidyah Bar David
On Mon, Jul 27, 2020 at 6:40 PM Nir Soffer  wrote:
>
> On Sat, Jul 25, 2020 at 5:24 AM Lynn Dixon  wrote:
>>
>> All,
>> I recently bought a wildcard certificate for my lab domain (shadowman.dev) 
>> and I replaced all the certs on my RHV4.3 machine per our documentation.  
>> The WebUI presents the certs successfully and without any issues, and 
>> everything seemed to be fine, until I tried to upload a disk image (or an 
>> ISO) to my storage domain.  I get this error in the events tab:
>>
>> https://share.getcloudapp.com/p9uPvegx
>>
>>
>> I also see that the disk is showing up in my storage domain, but its showing 
>> "Paused by System" and I can't do anything with it.  I cant even delete it!
>>
>> I have tried following this document to fix the issue, but it didn't work: 
>> https://access.redhat.com/solutions/4148361
>>
>> I am seeing this error pop into my engine.log:  https://pastebin.com/kDLSEq1A
>>
>> And I see this error in my image-proxy.log:
>> WARNING 2020-07-24 15:26:34,802 web:137:web:(log_error) ERROR [172.17.0.30] 
>> PUT /tickets/ [403] Error verifying signed ticket: Invalid ovirt ticket 
>> (data='--my_ticket_data-', reason=Untrusted certificate) 
>> [request=0.002946/1]
>
>
> This means ssl_* configuration in broken.
>
> We have 2 groups:
>
> Client ssl configuration:
>
> # Key file for SSL connections
> ssl_key_file = /etc/pki/ovirt-engine/keys/image-proxy.key.nopass
>
> # Certificate file for SSL connections
> ssl_cert_file = /etc/pki/ovirt-engine/certs/image-proxy.cer
>
> And engine SSL configuration:
>
> # Certificate file used when decoding signed token
> engine_cert_file = /etc/pki/ovirt-engine/certs/engine.cer
>
> # CA certificate file used to verify signed token
> engine_ca_cert_file = /etc/pki/ovirt-engine/ca.pem
>
> engine configuration is used to verify signed ticket used by engine when
> adding tickets to the proxy. This is internal flow that clients should not 
> care
> about. You should not replace these unless you are using also custom 
> certificate
> for engine itself - very unlikely and maybe unsupported.
> (Didi please correct me on this).

This is correct - it's unsupported.

We used to have an bug to make this pluggable, but it was never
handled and eventually closed:

https://bugzilla.redhat.com/1134219

>
>
> SSL client configuration is used when communicating with clients, and does
> not depend on engine ssl configuration. You can replace these with your 
> certificates.
>
> Can you share your /etc/ovirt-imageio/ovirt-imageio-proxy.conf?
>
> The main issue with the current configuration is that we don't have 
> ssl_ca_cert configuration,
> assuming that ssl_cert_file is a self signed certificate that includes the CA 
> certificate, since
> this is what engine is creating.
>
> In 4.4, we have more flexible configuration that should work for your case:
>
> $ cat /etc/ovirt-imageio/conf.d/50-engine.conf
> ...
> [tls]
> enable = true
> key_file = /etc/pki/ovirt-engine/keys/apache.key.nopass
> cert_file = /etc/pki/ovirt-engine/certs/apache.cer
> ca_file = /etc/pki/ovirt-engine/apache-ca.pem
>
> Adding ssl_ca_cert to imageio 1.5.3 looks simple enough, so I posted this
> completely untested patch:
> https://gerrit.ovirt.org/c/110498/
>
> You can try to upgrade your proxy to using this build:
> https://jenkins.ovirt.org/job/ovirt-imageio_standard-check-patch/3384/artifact/build-artifacts.el7.x86_64/
>
> Add a yum repo file with this baseurl=.
>
> Again this is untested, but you seem to be in the best place to test it,
> since I don't have any real certificates for testing.
>
> It would also be useful if you file a bug for this issue.
>
> Nir
>
>> Now, when I bought my wildcard, I was given a root certificate for the CA, 
>> as well as a separate intermediate CA certificate from the provider.  
>> Likewise, they gave me a certificate and a private key of course. The root 
>> and intermediate CA's certificates have been added to 
>> /etc/pki/ca-trust/source/anchors/ and I did an update-ca-trust.
>>
>> I also started experiencing issues with the ovpn network provider at the 
>> same time I replaced the SSL certs, but I disregarded it at the time, but 
>> now I am thinking its related.  Any advice on what to look for to fix the 
>> ovirt-imageio-proxy?
>>
>> Thanks!
>>
>>
>> Lynn Dixon | Red Hat Certified Architect #100-006-188
>> Solutions Architect | NA Commercial
>> Google Voice: 423-618-1414
>> Cell/Text: 423-774-3188
>> Click here to view my Certification Portfolio
>>
>>


-- 
Didi
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EO5MQMHXLPMW3TFDQFVZURURRYLSKLXI/


[ovirt-users] Management Engine IP change

2020-07-28 Thread Anton Louw via Users
Hi All,

Does somebody perhaps know the process of changing the Hosted Engine IP 
address? I see that it is possible, I am just not sure if it is a straight 
forward process using 'nmtui' or editing the network config file. I have also 
ensured that everything was configured using the FQDN.

Thanks


Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za

www.vox.co.za






___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EZPTYSINJMOIOR3QOG4KL3M5ZFHPHPQD/


[ovirt-users] Re: CentOS 8.2, ovVirt 4.4.1.8, SHE -- kernel: device-mapper: core: ovirt-ha-broker: sending ioctl 5401 to DM device without required privilege

2020-07-28 Thread Dmitry Kharlamov
Thank you very much for your help!
Let's filter ..

Best regards, Dmitry
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QVRLYJSUVLTCATGIWS2O5GNRRJ75234L/


[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-28 Thread James Loker-Steele via Users
The issue was the Bonded Nic i was trying to use.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G7C6JE7RKOMXJDSWQ46755XF2I6HU6UC/


[ovirt-users] VM locked and script unlock_entity.sh don't show any problem

2020-07-28 Thread Thomas BURGUIERE
The WEB interface show that the VM is locked, but when we run unlock_entity.sh 
there is no problem reported.

How we think the VM were locked :
There were filesystem issues (shortage disk space on the ovirt engine HOST) 
during a backup sequence, those consequences were discovered a few days later.
The VMs are backed-up with this way:
https://github.com/wefixit-AT/oVirtBackup

The ovirt-engine logs tell us that Postgres DB has encountered problem like 
this one during the backup process:
Message: PL/pgSQL function updatevdsdynamic(integer,integer,character 
varying,numeric,character 
varying,boolean,integer,integer,integer,uuid,integer,integer,integer,integer,integer,integer,integer,integer,character
 varying,character varying,character varying,character 
varying,integer,character varying,integer,integer,integer,boolean,character 
varying,character varying,character varying,character varying,character 
varying,character varying,character varying,character varying,character 
varying,character varying,character varying,integer,text,integer,character 
varying,character varying,character varying,character varying,character 
varying,character varying,text,text,smallint,integer,smallint,boolean,character 
varying,text,text,boolean,boolean,text,character 
varying,boolean,uuid,boolean,jsonb) line 4 at SQL statement; nested exception 
is org.postgresql.util.PSQLException: ERROR: could not extend file 
"base/16385/190997": No space left on device

Later, we saw that those VMs they got a lock icon in the status column since 
this episode. This did not appear immediatly, but maybe a few hours after.

It happens that those locked VMs are sort-of limited in the way that there are 
numerous things we cannot do with them, such as: 
- edit parameters (i.e. memory).
- start them again after they get halted by unix command (halt -p) 
- copy the related disk.

The version of ovirt used 4.2.1

Is there an other way to unlock the VMs ?
Or to get unlock_entity.sh to work ?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JJJ3VWJTA2DWW6ZICZZJBJQU7PTBYAW3/


[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-28 Thread James Loker-Steele via Users
Hi Anton,

I tried without the /24 it threw an error saying it wasn’t a correct cidr 
address 10.93.130.50/64 (it added the /64)

Interesting though, I have manually created the ovirtmgmt bridge interface and 
assigned an IP address to it (as per another post) and it has gone past this 
step now without the /24.

The part I am crashing out on is being unable to resolve the address.  I can 
post the error shortly.
This is strange behaviour as the host can resolve, but I will be adding dns 
addresses to the ovirtmgmt interface and trying again(post didn’t show to add 
them) 

When I installed <4.2 I didn’t get these issues it went smoothly.
The problems seem related to ansible.

Best regards

James
Sent from my iPhone

> On 28 Jul 2020, at 07:25, Anton Louw  wrote:
> 
>  
> 
> Hi James,
>  
> You can remove the “/24” prefix after the IP address for the management VM. 
> You will get prompts to add the netmask and gateway after you add the IP 
> address.
>  
> 
> Anton Louw
> Cloud Engineer: Storage and Virtualization at Vox
> T:  087 805  | D: 087 805 1572
> M: N/A
> E: anton.l...@voxtelecom.co.za
> A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
> www.vox.co.za
> 
> 
>   
> 
>   
> 
>   
> 
>   
> 
>  
> 
> 
> Disclaimer
> 
> The contents of this email are confidential to the sender and the intended 
> recipient. Unless the contents are clearly and entirely of a personal nature, 
> they are subject to copyright in favour of the holding company of the Vox 
> group of companies. Any recipient who receives this email in error should 
> immediately report the error to the sender and permanently delete this email 
> from all storage devices.
> 
> This email has been scanned for viruses and malware, and may have been 
> automatically archived by Mimecast Ltd, an innovator in Software as a Service 
> (SaaS) for business. Providing a safer and more useful place for your human 
> generated data. Specializing in; Security, archiving and compliance. To find 
> out more Click Here.
> 
> 
> 
> From: James Loker-Steele via Users  
> Sent: 27 July 2020 11:36
> To: users@ovirt.org
> Subject: [ovirt-users] Failed to execute stage 'Environment customization': 
> IPAddress() does not support netmasks or subnet prefixes! See documentation 
> for details.
>  
> Hi All,
> Trying to install a self-hosted engine but cannot get past this step.
> 
> [root@ /]# hosted-engine --deploy
> [ INFO ] Stage: Initializing
> [ INFO ] Stage: Environment setup
> During customization use CTRL-D to abort.
> Continuing will configure this host for serving as hypervisor and will create 
> a local VM with a running engine.
> The locally running engine will be used to configure a new storage domain and 
> create a VM there.
> At the end the disk of the local VM will be moved to the shared storage.
> Are you sure you want to continue? (Yes, No)[Yes]: 
> Configuration files: []
> Log file: 
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log
> Version: otopi-1.8.3 (otopi-1.8.3-1.el7)
> [ INFO ] Stage: Environment packages setup
> [ INFO ] Stage: Programs detection
> [ INFO ] Stage: Environment setup (late)
> [ INFO ] Stage: Environment customization
> 
> --== STORAGE CONFIGURATION ==--
> 
> 
> --== HOST NETWORK CONFIGURATION ==--
> 
> Please indicate the gateway IP address [10.x.x.x]: 
> [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of 
> steps]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing 
> management bridge]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list]
> [ INFO ] ok: [localhost]
> [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface 
> if management bridge does not exists]
> [ INFO ] skipping: [localhost]
> Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, 
> bond0.60, em1) [em1]: bond0.130
> Please specify which way the network connectivityshould be checked (ping, 
> dns, tcp, none) [dns]: 
> 
> --== VM CONFIGURATION ==--
> 
> Please enter the name of the datacenter where you want to deploy this 
> hosted-engine host. [Default]: 
> Please enter the name of the cluster where you want to deploy this 
> hosted-engine host. [Default]: 
> If you want to deploy with a custom engine appliance image,
> please specify the path to the OVA archive you would like to use
> (leave it empty to skip, the setup will use ovirt-engine-appliance rpm 
> installing it if missing): 
> /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova
> [ INFO ] Checking OVF archive content (could take a few minutes depending on 
> archive 

[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-28 Thread Anton Louw via Users
Hi James,

You can remove the “/24” prefix after the IP address for the management VM. You 
will get prompts to add the netmask and gateway after you add the IP address.


Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za

www.vox.co.za



From: James Loker-Steele via Users 
Sent: 27 July 2020 11:36
To: users@ovirt.org
Subject: [ovirt-users] Failed to execute stage 'Environment customization': 
IPAddress() does not support netmasks or subnet prefixes! See documentation for 
details.

Hi All,
Trying to install a self-hosted engine but cannot get past this step.

[root@ /]# hosted-engine --deploy
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
During customization use CTRL-D to abort.
Continuing will configure this host for serving as hypervisor and will create a 
local VM with a running engine.
The locally running engine will be used to configure a new storage domain and 
create a VM there.
At the end the disk of the local VM will be moved to the shared storage.
Are you sure you want to continue? (Yes, No)[Yes]:
Configuration files: []
Log file: 
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log
Version: otopi-1.8.3 (otopi-1.8.3-1.el7)
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup (late)
[ INFO ] Stage: Environment customization

--== STORAGE CONFIGURATION ==--


--== HOST NETWORK CONFIGURATION ==--

Please indicate the gateway IP address [10.x.x.x]:
[ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing 
management bridge]
[ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface 
if management bridge does not exists]
[ INFO ] skipping: [localhost]
Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, bond0.60, 
em1) [em1]: bond0.130
Please specify which way the network connectivityshould be checked (ping, dns, 
tcp, none) [dns]:

--== VM CONFIGURATION ==--

Please enter the name of the datacenter where you want to deploy this 
hosted-engine host. [Default]:
Please enter the name of the cluster where you want to deploy this 
hosted-engine host. [Default]:
If you want to deploy with a custom engine appliance image,
please specify the path to the OVA archive you would like to use
(leave it empty to skip, the setup will use ovirt-engine-appliance rpm 
installing it if missing): 
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova
[ INFO ] Checking OVF archive content (could take a few minutes depending on 
archive size)
[ INFO ] Checking OVF XML content (could take a few minutes depending on 
archive size)
Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF 
value): [4]:
Please specify the memory size of the VM in MB (Defaults to appliance OVF 
value): [4]: 16384
[ INFO ] Detecting host timezone.
Please provide the FQDN you would like to use for the engine.
Note: This will be the FQDN of the engine VM you are now going to launch,
it should not point to the base host or to any other existing machine.
Engine VM FQDN: []: 
Please provide the domain name you would like to use for the engine appliance.
Engine VM domain: []
Enter root password that will be used for the engine appliance:
Confirm appliance root password:
Enter ssh public key for the root user that will be used for the engine 
appliance (leave it empty to skip):
[WARNING] Skipping appliance root ssh public key
Do you want to enable ssh access for the root user (yes, no, without-password) 
[yes]:
Do you want to apply a default OpenSCAP security profile (Yes, No) [No]:
You may specify a unicast MAC address for the VM or accept a randomly generated 
default [00:16:3e:3a:4b:fc]:

How should the engine VM network be configured (DHCP, Static)[DHCP]? static
Please enter the IP address to be used for the engine VM []: 
10.93.130.50/24
[ ERROR ] Failed to execute stage 'Environment customization': IPAddress() does 
not support netmasks or subnet prefixes! See documentation for details.
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
[ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO ] ok: [localhost]
[ INFO ] TASK 

[ovirt-users] Re: [rhev-tech] ovirt-imageio-proxy not working after updating SSL certificates with a wildcard cert issued by AlphaSSL (intermediate)

2020-07-28 Thread Lynn Dixon
I am running 1.5.3 of all of the imageio-* packages.  THe test button in
RHVM for the uploader comes back successfully with no errors.

I am at a loss here.


*Lynn Dixon* | Red Hat Certified Architect #100-006-188
*Solutions Architect* | NA Commercial
Google Voice: 423-618-1414
Cell/Text: 423-774-3188
Click here to view my Certification Portfolio 




On Sat, Jul 25, 2020 at 12:53 AM Greg Scott  wrote:

> Make sure you have the right imageio versions. We spent around two months
> troubleshooting a similar problem and eventually found my customer had
> imageio 1.0.0 when they should have had something like 1.4.4. Do an rpm -
> qa | grep imageio on both your RHVM and RHV-H systems and see what it looks
> like.
>
> Also try that test button in RHVM and see how it behaves. Does it fail
> right away or does it take a couple seconds?
>
> - Greg
>
> On Fri, Jul 24, 2020 at 9:24 PM Lynn Dixon  wrote:
>
>> All,
>> I recently bought a wildcard certificate for my lab domain (shadowman.dev)
>> and I replaced all the certs on my RHV4.3 machine per our documentation.
>> The WebUI presents the certs successfully and without any issues, and
>> everything seemed to be fine, until I tried to upload a disk image (or an
>> ISO) to my storage domain.  I get this error in the events tab:
>>
>> https://share.getcloudapp.com/p9uPvegx
>> [image: image.png]
>>
>> I also see that the disk is showing up in my storage domain, but its
>> showing "Paused by System" and I can't do anything with it.  I cant even
>> delete it!
>>
>> I have tried following this document to fix the issue, but it didn't
>> work: https://access.redhat.com/solutions/4148361
>>
>> I am seeing this error pop into my engine.log:
>> https://pastebin.com/kDLSEq1A
>>
>> And I see this error in my image-proxy.log:
>> WARNING 2020-07-24 15:26:34,802 web:137:web:(log_error) ERROR
>> [172.17.0.30] PUT /tickets/ [403] Error verifying signed ticket: Invalid
>> ovirt ticket (data='--my_ticket_data-', reason=Untrusted
>> certificate) [request=0.002946/1]
>>
>> Now, when I bought my wildcard, I was given a root certificate for the
>> CA, as well as a separate intermediate CA certificate from the provider.
>> Likewise, they gave me a certificate and a private key of course. The root
>> and intermediate CA's certificates have been added
>> to /etc/pki/ca-trust/source/anchors/ and I did an update-ca-trust.
>>
>> I also started experiencing issues with the ovpn network provider at the
>> same time I replaced the SSL certs, but I disregarded it at the time, but
>> now I am thinking its related.  Any advice on what to look for to fix the
>> ovirt-imageio-proxy?
>>
>> Thanks!
>>
>>
>> *Lynn Dixon* | Red Hat Certified Architect #100-006-188
>> *Solutions Architect* | NA Commercial
>> Google Voice: 423-618-1414
>> Cell/Text: 423-774-3188
>> Click here to view my Certification Portfolio 
>>
>>
>>
>
> --
> Greg Scott
> Red Hat Senior Technical Account Manager
> mobile 1-651-260-1051
>
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ADOZRMPSNXLZ4LUODFLGD7XKOMI7DDQM/


[ovirt-users] Re: Deploying new Ovirt Node on new 4.4 cluster. ansible code incorrect

2020-07-28 Thread erin . sims
Thanks, sorry it took so long to get back to you. 
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GWOWN6XE3HMPDR64BOMF6AAAXJQSL3GG/


[ovirt-users] Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

2020-07-28 Thread James Loker-Steele via Users
Hi All,
Trying to install a self-hosted engine but cannot get past this step.

[root@ /]# hosted-engine --deploy
[ INFO  ] Stage: Initializing
[ INFO  ] Stage: Environment setup
  During customization use CTRL-D to abort.
  Continuing will configure this host for serving as hypervisor and 
will create a local VM with a running engine.
  The locally running engine will be used to configure a new storage 
domain and create a VM there.
  At the end the disk of the local VM will be moved to the shared 
storage.
  Are you sure you want to continue? (Yes, No)[Yes]: 
  Configuration files: []
  Log file: 
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20200724164325-fyyler.log
  Version: otopi-1.8.3 (otopi-1.8.3-1.el7)
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup (late)
[ INFO  ] Stage: Environment customization
 
  --== STORAGE CONFIGURATION ==--
 
 
  --== HOST NETWORK CONFIGURATION ==--
 
  Please indicate the gateway IP address [10.x.x.x]: 
[ INFO  ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of 
steps]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing 
management bridge]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Generate output list]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface 
if management bridge does not exists]
[ INFO  ] skipping: [localhost]
  Please indicate a nic to set ovirtmgmt bridge on: (bond0, bond0.130, 
bond0.60, em1) [em1]: bond0.130
  Please specify which way the network connectivityshould be checked 
(ping, dns, tcp, none) [dns]: 
 
  --== VM CONFIGURATION ==--
 
  Please enter the name of the datacenter where you want to deploy this 
hosted-engine host. [Default]: 
  Please enter the name of the cluster where you want to deploy this 
hosted-engine host. [Default]: 
  If you want to deploy with a custom engine appliance image,
  please specify the path to the OVA archive you would like to use
  (leave it empty to skip, the setup will use ovirt-engine-appliance 
rpm installing it if missing): 
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.3-20190926.1.0.5.el7.ova
[ INFO  ] Checking OVF archive content (could take a few minutes depending on 
archive size)
[ INFO  ] Checking OVF XML content (could take a few minutes depending on 
archive size)
  Please specify the number of virtual CPUs for the VM (Defaults to 
appliance OVF value): [4]: 
  Please specify the memory size of the VM in MB (Defaults to appliance 
OVF value): [4]: 16384
[ INFO  ] Detecting host timezone.
  Please provide the FQDN you would like to use for the engine.
  Note: This will be the FQDN of the engine VM you are now going to 
launch,
  it should not point to the base host or to any other existing machine.
  Engine VM FQDN:  []: 
  Please provide the domain name you would like to use for the engine 
appliance.
  Engine VM domain: []
  Enter root password that will be used for the engine appliance: 
  Confirm appliance root password: 
  Enter ssh public key for the root user that will be used for the 
engine appliance (leave it empty to skip): 
[WARNING] Skipping appliance root ssh public key
  Do you want to enable ssh access for the root user (yes, no, 
without-password) [yes]: 
  Do you want to apply a default OpenSCAP security profile (Yes, No) 
[No]: 
  You may specify a unicast MAC address for the VM or accept a randomly 
generated default [00:16:3e:3a:4b:fc]: 

  How should the engine VM network be configured (DHCP, Static)[DHCP]? 
static 
  Please enter the IP address to be used for the engine VM []: 
10.93.130.50/24
[ ERROR ] Failed to execute stage 'Environment customization': IPAddress() does 
not support netmasks or subnet prefixes! See documentation for details.
[ INFO  ] Stage: Clean up
[ INFO  ] Cleaning temporary resources
[ INFO  ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of 
steps]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Force facts gathering]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Fetch logs from the engine VM]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK [ovirt.hosted_engine_setup : Set destination directory path]
[ INFO  ] ok: [localhost]
[ INFO  ] TASK 

[ovirt-users] Ovirt hypervisor as an DRBD node

2020-07-28 Thread radchenko . anatoliy
Hi community,
I would like to use 3 nodes for hypervisor (hosted engine or install a separate 
VM with engine for its subsequent management) to use them as storage nodes - 
drbd 9 dual primary + quorum node (aka backup), ocfs 2 - so that the VMs used 
the hardware of both nodes (so to speak, hyperconverged with drbd). Can you 
tell me if there are any limits on the part of ovirt for this configuration and 
the best way to mount ocfs2 - iscsi via scst, posixFS or cinder?
Thanks in advance
Best regards
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/XEFI5UWHODWAPDKROWVDLE4OIWHQ2P77/