[ovirt-users] Connection failed

2020-10-01 Thread info
Messages related to the failure might be found in the journal "journalctl -u cockpit" This is the output node01.xxx.co.za cockpit-tls[8249]: cockpit-tls: gnutls_handshake failed: A TLS fatal alert has been received. Any suggestion will be appreciated as I struggle for days to get

[ovirt-users] Re: ldap auth problem after upgrade from 4.4.1 to 4.4.2

2020-10-01 Thread Martin Perina
On Thu, Oct 1, 2020 at 3:18 PM Jiří Sléžka wrote: > Hi, > > On 10/1/20 2:53 PM, Martin Perina wrote: > > Hi, > > > > it seems that you are affected by > > https://bugzilla.redhat.com/show_bug.cgi?id=1880149 > > Could you please try the workaround mentioned there? > > bingo! Thanks a lot! > > It

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread Stack Korora
On 2020-10-01 04:33, Jeremey Wise wrote: > > I have for many years used gluster because..well.  3 nodes.. and so > long as I can pull a drive out.. I can get my data.. and with three > copies.. I have much higher chance of getting it. > > Downsides to gluster: Slower (its my home..meh... and I

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread Erick Perez - Quadrian Enterprises
@kushwaha jumping into this thread I am also interested in your setup. Thanks. Erick On Thu, Oct 1, 2020 at 11:14 AM Kushwaha, Tarun Kumar < ta...@synergysystemsindia.com> wrote: > hi > i am running production with oVirt Ceph HCI last 1 year > > https://skyvirt.tech is running over it > > i

[ovirt-users] [ANN] oVirt 4.4.3 Third Release Candidate is now available for testing

2020-10-01 Thread Lev Veyde
oVirt 4.4.3 Third Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.3 Third Release Candidate for testing, as of October 1st, 2020. This update is the third in a series of stabilization updates to the 4.4 series. How to prevent

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread Kushwaha, Tarun Kumar
hi i am running production with oVirt Ceph HCI last 1 year https://skyvirt.tech is running over it i can share how to setup On Thu, 1 Oct 2020, 21:31 Philip Brown, wrote: > ceph through an iscsi gateway is very.. very.. slow. > > > > - Original Message - > From: "Matthew Stier" > To:

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread Philip Brown
ceph through an iscsi gateway is very.. very.. slow. - Original Message - From: "Matthew Stier" To: "Jeremey Wise" , "users" Sent: Wednesday, September 30, 2020 10:03:34 PM Subject: [ovirt-users] Re: CEPH - Opinions and ROI If you can’t go direct, how about round about, with an iSCSI

[ovirt-users] Re: OVN Geneve tunnels not been established

2020-10-01 Thread Konstantinos Betsis
Regarding the ovn-controller logs 2020-10-01T15:51:03.156Z|14143|main|INFO|OVNSB commit failed, force recompute next time. 2020-10-01T15:51:03.220Z|14144|main|INFO|OVNSB commit failed, force recompute next time. 2020-10-01T15:51:03.284Z|14145|main|INFO|OVNSB commit failed, force recompute

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread penguin pages
Thanks for response. Seems a bit too far into "bleeding edge" .. such that I should kick tires virtually vs commuting plugins to oVirt +Gluster where upgrades and other issues may happen. Seems like Alpha stage of (no thin provisioning, issues with deleting volumes, no export / import ..

[ovirt-users] Re: VM AutoStart

2020-10-01 Thread Gianluca Cecchi
On Wed, Sep 30, 2020 at 9:14 PM Jeremey Wise wrote: > i would like to eventually go ansible route.. and was starting down that > path but this is fabulous. > > I will modify and post how it went. > > One question: How /where do you set this saved new and delicious script > so once

[ovirt-users] Re: Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way

2020-10-01 Thread kushagra2agarwal
@strahil Nikolov 'scheduling_policy' & 'scheduling_policy_properties' options in oVirt_Cluster module are not allowing to change scheduler optimisation settings. If okay can you please double check once. ___ Users mailing list -- users@ovirt.org To

[ovirt-users] Re: Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way

2020-10-01 Thread kushagra2agarwal
@strahil Nikolov - The scheduling_policy' & 'scheduling_policy_properties options are not allowing to change 'scheduler optimisation' parameter setting, may be i am missing something while trying with these options. If okay, can you please double check once.

[ovirt-users] Re: OVN Geneve tunnels not been established

2020-10-01 Thread Konstantinos Betsis
Hi Dimitru I've seen that as well. I've deleted the dc01-node2 (ams03-hypersec02) from ovirt. I've also issued ovs-vsctl emer-reset. But ovn-sbctl list chassis still depicts the node twice. The ovs-sbctl show still depicts 3 geneve tunnels from dc01-node2 How, can we fix this? On Thu,

[ovirt-users] Re: Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way

2020-10-01 Thread Strahil Nikolov via Users
Based on 'https://docs.ansible.com/ansible/latest/collections/ovirt/ovirt/ovirt_cluster_module.html' there is option 'scheduling_policy' & 'scheduling_policy_properties' . Maybe that was recently introduced. Best Regards, Strahil Nikolov В четвъртък, 1 октомври 2020 г., 17:24:25

[ovirt-users] Re: ovirt-node-4.4.2 grub is not reading new grub.cfg at boot

2020-10-01 Thread Strahil Nikolov via Users
Either use 'grub2-editenv' or 'grub2-editenv - unset kernelopts' + 'grub2-mkconfig -o /boot/grub2/grub.cfg'

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread Strahil Nikolov via Users
CEPH requires at least 4 nodes to be "good". I know that Gluster is not the "favourite child" for most vendors, yet it is still optimal for HCI. You can check  https://www.ovirt.org/develop/release-management/features/storage/cinder-integration.html for cinder integration. Best Regards,

[ovirt-users] Re: VM AutoStart

2020-10-01 Thread Strahil Nikolov via Users
In EL 8 , there is no 'default' python. You can use both. My choice would be ansible because APIs change , but also ansible modules are updated. If you create your own script , you will have to take care about the updates, while with ansible - you just update the relevan packages :) Best

[ovirt-users] Re: VM AutoStart

2020-10-01 Thread Strahil Nikolov via Users
As I mentioned, I would use systemd service to start the ansible play (or a script running it). Best Regards, Strahil Nikolov В сряда, 30 септември 2020 г., 22:15:17 Гринуич+3, Jeremey Wise написа: i would like to eventually go ansible route..  and was starting down that path

[ovirt-users] Re: Power on VM - CLI / API

2020-10-01 Thread Strahil Nikolov via Users
--- - name: Example   hosts: localhost   connection: local   vars:     ovirt_auth:       username: 'admin@internal'       password: 'pass'       url: 'https://engine.localdomain/ovirt-engine/api'       insecure: True       ca_file: '/root/ansible/engine.ca'     - name: Power on {{ outer_item }}

[ovirt-users] Re: ovirt-node-4.4.2 grub is not reading new grub.cfg at boot

2020-10-01 Thread Mike Lindsay
Wow, that's annoying...6 hours I spent trying to figure out what was different with the Centos/RHEL 8 grub.cfg configuration and nothing popped up about grubby ;p Thanks very much for that, it's making for an interesting read. Cheers, Mike On Thu, 1 Oct 2020 at 10:10, Amit Bawer wrote: > > > >

[ovirt-users] Re: Is it possible to change scheduler optimization settings of cluster using ansible or some other automation way

2020-10-01 Thread kushagra2agarwal
@strahil Nikolov.. ovirt_cluster module don't seems to have flag to change scheduler optimisation settings. Can you please double check ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: ovirt-node-4.4.2 grub is not reading new grub.cfg at boot

2020-10-01 Thread Amit Bawer
On Thu, Oct 1, 2020 at 4:12 PM Mike Lindsay wrote: > Hey Folks, > > I've got a bit of a strange one here. I downloaded and installed > ovirt-node-ng-installer-4.4.2-2020091810.el8.iso today on an old dev > laptop and to get it to install I needed to add acpi=off to the kernel > boot param to get

[ovirt-users] Re: ldap auth problem after upgrade from 4.4.1 to 4.4.2

2020-10-01 Thread Jiří Sléžka
Hi, On 10/1/20 2:53 PM, Martin Perina wrote: > Hi, > > it seems that you are affected by > https://bugzilla.redhat.com/show_bug.cgi?id=1880149 > Could you please try the workaround mentioned there? bingo! Thanks a lot! It is interesting behavior as my engine has no public ipv6 address (ipv6 is

[ovirt-users] ovirt-node-4.4.2 grub is not reading new grub.cfg at boot

2020-10-01 Thread Mike Lindsay
Hey Folks, I've got a bit of a strange one here. I downloaded and installed ovirt-node-ng-installer-4.4.2-2020091810.el8.iso today on an old dev laptop and to get it to install I needed to add acpi=off to the kernel boot param to get the installing to work (known issue with my old laptop). After

[ovirt-users] Re: ldap auth problem after upgrade from 4.4.1 to 4.4.2

2020-10-01 Thread Martin Perina
Hi, it seems that you are affected by https://bugzilla.redhat.com/show_bug.cgi?id=1880149 Could you please try the workaround mentioned there? Thanks, Martin On Thu, Oct 1, 2020 at 11:17 AM Jiří Sléžka wrote: > Hi, > > I just upgraded my HE to 4.4.2 but now I cannot login using my ldap aaa >

[ovirt-users] Re: CEPH - Opinions and ROI

2020-10-01 Thread penguin pages
These are all storage rich servers. Drives: USB 3 64GB Boot / OS 512GB SSD (Gluster HCI: volumes "engine", "data" , "vmstore" "iso" I added last one to .. well to learn if I could extend with LVM ;) 1TB SSD: (VDO+Gluster Manual build due to brick and fqdn issues in oVirt, It did import

[ovirt-users] Re: java.lang.reflect.UndeclaredThrowableException - oVirt engine UI

2020-10-01 Thread penguin pages
Sorry.. this was a duplicate post.. I added this via web browser... waited 5 min... it did not show.. so I assumed it failed to post.. so sent again via email https://lists.ovirt.org/archives/list/users@ovirt.org/thread/45KKF5TN5PRQ3R7MDOWIQTSYZXZRVDIZ/ Fixed

[ovirt-users] Re: Problem with Cluster-wise BIOS Settings in oVirt 4.4

2020-10-01 Thread thomas
Que yo sepa, no existe alternativa al reinstalarlo... La maquina de manejamiento hereda su configuracion del cluster y en este caso, cuando lo tengas cambiado, le falta la hardware virtualizada para arrancar, y como no tienes GUI tampoco lo puedes cambiar... ¡No eres el primero quien haya

[ovirt-users] ldap auth problem after upgrade from 4.4.1 to 4.4.2

2020-10-01 Thread Jiří Sléžka
Hi, I just upgraded my HE to 4.4.2 but now I cannot login using my ldap aaa profile anymore. We are using Novell/NetIQ E-directory (load ballanced by haproxy, probably not important...) In 4.4.1 I was hit by removed TLSv1 (which is the newest protocol supported by our edir) from default crypto

[ovirt-users] Re: java.lang.reflect.UndeclaredThrowableException - oVirt engine UI

2020-10-01 Thread Artur Socha
Hi Jeremey, Could you please post some relevant piece of : 1) HE VM /var/log/ovirt-engine/engine.log Plus: # dnf list --installed | grep ovirt-engine 2) Host with HE VM /var/log/ovirt-hosted-engine-ha/{agent.log,broker.log} /var/log/vdsm/vdsm.log Plus: $ dnf list --installed | egrep

[ovirt-users] Re: OVN Geneve tunnels not been established

2020-10-01 Thread Dumitru Ceara
On 10/1/20 8:59 AM, Dumitru Ceara wrote: > On 9/30/20 3:41 PM, Konstantinos Betsis wrote: >> From the configuration I can see only three nodes. >> "Encap":{ >> #dc01-node02 >>

[ovirt-users] Re: OVN Geneve tunnels not been established

2020-10-01 Thread Dumitru Ceara
On 9/30/20 3:41 PM, Konstantinos Betsis wrote: > From the configuration I can see only three nodes. > "Encap":{ > #dc01-node02 >