Good day all!
have been a KVM user/admin for the last few years and have configured all
aspects using either VirtManager or CLI where required.
am about to reinstall my development system and started to look at using
CentOS7 as the host, and to get a more recent version of KVM. After a little
Further to this if I wished to use oVirt do I need to completely wipe the
CentOS7 server or could I install the upcoming oVirt 3.5 directly over the top
? Thank you.
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Tuesday, 7 October, 2014 10:32:32 AM
Would this be the way to integrate OVS
http://www.ovirt.org/OVirt_Neutron_GRE_Integration_-_How_To ? or in 3.5 are you
able to import OVS networks now ? Thank you.
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Tuesday, 7 October, 2014 12:51:37 PM
Hello Dan,
Options mainly as would like to start using SFlow down the line for protocol
analysis across the VMs; plus GRE etc.
Thanks, P.
- Original Message -
From: Dan Yasny dya...@gmail.com
To: Phil Daws ux...@splatnix.net
Cc: users users@ovirt.org
Sent: Tuesday, 7 October, 2014
just build that as
a node and the Engine can be moved between. Is that correct ? Thanks, P.
- Original Message -
From: Dan Yasny dya...@gmail.com
To: Phil Daws ux...@splatnix.net
Cc: users users@ovirt.org
Sent: Tuesday, 7 October, 2014 2:29:39 PM
Subject: Re: [ovirt-users] To oVirt
. Just looking at my two
systems there is quite a gap already:
C6
--
qemu-kvm-0.12.1.2-2.415.el6_5.10.x86_64
C7
--
qemu-kvm-1.5.3-60.el7_0.7.0.1.x86_64
All thoughts appreciated. Thanks, P.
- Original Message -
From: Dan Yasny dya...@gmail.com
To: Phil Daws ux...@splatnix.net
Cc: users
Appreciated Daniel. If add more hosts down the line may the engine
configuration be migrated back to a VM for resilience ? Thanks, P.
- Original Message -
From: Daniel Helgenberger daniel.helgenber...@m-box.de
To: Phil Daws ux...@splatnix.net, users users@ovirt.org
Sent: Tuesday, 7
Waiting on 3.5 release I believe (like myself :))
- Original Message -
From: Igor Gnatenko ignatenkobr...@fedoraproject.org
To: users@ovirt.org
Sent: Tuesday, 14 October, 2014 4:33:50 PM
Subject: [ovirt-users] oVirt status in EL7
Hi,
What status of support EL7 in oVirt? I mean as
Hello:
I now have two servers that I would like to install CentOS7 on and run the
latest release of 3.5 on. Have taken a look at http://resources.ovirt.org/pub/
and there appears to be quite a few different versions. Would
http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ be the most
them to the outside work I can configure NAT addresses. Does this
appear to be the most sensible approach ? or should I look to use the hosted
engine configuration ?
Any help and advice would be appreciated.
Thank you, Phil.
- Original Message -
From: Phil Daws ux...@splatnix.net
Hello:
have installed oVirt 3.5 VDSM on a CentOS 7 node and then OpenVPN. The problem
I have is that when I start OpenVPN I receive the message:
Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip link set dev tun0 up mtu 1500
Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip addr add dev tun0
User error.
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users users@ovirt.org
Sent: Saturday, 18 October, 2014 1:45:34 PM
Subject: [ovirt-users] CentOS 7 + oVirt 3.5 + OpenVPN
Hello:
have installed oVirt 3.5 VDSM on a CentOS 7 node and then OpenVPN. The problem
I have
Hello All!
Am really enjoying experimenting with oVirt but have come across a question;
how does one enable NAT for a VM ? Would like my guests to be able to update
their software by bridging the host public IP. I could not see anything in the
WUI to allow this ?
Thanks, Phil
Hello:
have installed oVirt 3.5 on two cloud based servers and then managing them from
a local engine using a VPN link. On each server I would like to use the
Neutron VM appliance so that I can provision the networks using OpenVswitch as
I would like to learn about using OSPF between the two
Hmmm, this is interesting as it would appear you can only use the Neutron
appliance with a brand new host ?!? so how does one switch to use it on a
current system ?
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Tuesday, 21 October, 2014
Hi Moti:
thank you for detailed response. I will diagram what I am thinking as that
should explain it a whole lot better :)
Thanks, Phil
- Original Message -
From: Moti Asayag masa...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: users users@ovirt.org
Sent: Tuesday, 21 October, 2014
that.
Hope that makes sense ?
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Moti Asayag masa...@redhat.com
Cc: users users@ovirt.org
Sent: Tuesday, 21 October, 2014 5:26:33 PM
Subject: Re: [ovirt-users] oVirt 3.5 Neutron (Will this work?)
Hi Moti:
thank
Hello:
if one has already created a VM, with hostname, IP address etc, are you then
able to switch it to use cloud-init so that it reports back the IP address and
hostname to the engine manager ?
Thanks, Phil
___
Users mailing list
Users@ovirt.org
Appliance.
- Original Message -
From: Dan Kenigsberg dan...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: users@ovirt.org
Sent: Wednesday, 22 October, 2014 2:13:34 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
On Mon, Oct 20, 2014 at 08:02:01PM +0100, Phil Daws wrote:
Hello All!
Am really
? Thanks, Phil.
- Original Message -
From: Dan Kenigsberg dan...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: users@ovirt.org
Sent: Wednesday, 22 October, 2014 3:54:46 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
On Wed, Oct 22, 2014 at 03:12:09PM +0100, Phil Daws wrote:
Thanks Dan Antoni
That is what I tried but oVirt appears to overwrite the bridge information on
boot :( Thanks, Phil
- Original Message -
From: Antoni Segura Puimedon asegu...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: Dan Kenigsberg dan...@redhat.com, users@ovirt.org
Sent: Monday, 27 October, 2014 8
be defined by oVirt then I guess with a custom hook that
would then be added to the OVS stack ?
Thanks, Phil
- Original Message -
From: Antoni Segura Puimedon asegu...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: Dan Kenigsberg dan...@redhat.com, users@ovirt.org
Sent: Monday, 27 October
Daws ux...@splatnix.net
Cc: Dan Kenigsberg dan...@redhat.com, users@ovirt.org
Sent: Monday, 27 October, 2014 12:13:30 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: Dan Kenigsberg
that allows one to define an OVS bridge name and VLAN so when a virtual
guest is created it can be assigned to the new bridge; with the use of a custom
hook.
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: users
be able to use a vNIC profile for adding an interface
directly to OVS using a custom hook.
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Monday, 27 October, 2014 3:04:20 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
Well, in fact have
'/
filterref filter='vdsm-no-mac-spoofing'/
link state='up'/
bandwidth
/bandwidth
alias name='net0'/
address type='pci' domain='0x' bus='0x00' slot='0x03'
function='0x0'/
/interface
Thanks, Phil
- Original Message -
From: Phil Daws ux
Am starting to believe may have to give up on oVirt and move back to straight
KVM and Openvswitch as that just worked which is a real shame :(
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Monday, 27 October, 2014 5:51:53 PM
Subject: Re: [ovirt-users
replacing the bridge with a network and setting the network to be the OVS
one I have defined.
Any ideas please ? Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users@ovirt.org
Sent: Tuesday, 28 October, 2014 12:18:47 PM
Subject: Re: [ovirt-users] oVirt 3.5 NAT
Am
Hello:
How does one create multiple ISO domains ? if I try it just throws a general
error Error while executing action New NFS Storage Domain: Error creating a
storage domain. And if the question is asked why would one require multiple
ISO domains its when one has clusters in multiple data
Answered this myself! :(
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users users@ovirt.org
Sent: Wednesday, 12 November, 2014 2:54:19 PM
Subject: [ovirt-users] Multiple ISO Storage Domains
Hello:
How does one create multiple ISO domains ? if I try it just throws a general
Exactly. That is why I answered it myself and moved to the bottom of the class
:( Thanks.
- Original Message -
From: Itamar Heim ih...@redhat.com
To: Phil Daws ux...@splatnix.net, users users@ovirt.org
Sent: Wednesday, 12 November, 2014 3:25:51 PM
Subject: Re: [ovirt-users] Multiple ISO
Hi:
I have my VDSM service and engine up and running now am trying to create a VM.
As my client machine is Windows 8.1 Pro I am trying to use noVNC to connect.
Am not using a self signed SSL cert but every time I try and connect it says
connect timeout. Port on the engine is listening fine:
VM guest is CentOS 7 and it is at install time.
-Original Message-
From: Anatoly Litvosky [tlito...@redhat.com]
Received: Sunday, 16 Nov 2014, 15:50
To: Phil Daws [ux...@splatnix.net]
CC: users@ovirt.org
Subject: Re: [ovirt-users] noVNC
Can you ping the win guest ?
On Sun, 2014-11-16
resolved. CN mismatch even though using wildcard cert.
- Original Message -
From: Phil Daws phil.d...@innovot.com
To: ux...@splatnix.net, tlito...@redhat.com
Cc: users@ovirt.org
Sent: Sunday, 16 November, 2014 4:33:32 PM
Subject: RE: [ovirt-users] noVNC
VM guest is CentOS 7
---]+|)$}} version: 3.5
and when I checked vdsm.log it is being called okay when the VM first starts
after adding the additional NICs.
How am I able to debug please ?
Thanks, Phil
- Original Message -
From: Antoni Segura Puimedon asegu...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: users
With thanks to Antoni we have this working now. The working hook may be viewed
at http://paste.fedoraproject.org/152070/
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Antoni Segura Puimedon asegu...@redhat.com
Cc: users users@ovirt.org
Sent: Monday, 17 November, 2014 3:30
Yes, thank you Robert. The hook is working wonderfully! Have a single NIC on
the VDSM host configured with public IP, then OVS installed, and VLANs hanging
off that to a guest which is acting as the firewall to internal/NAT systems.
[root@vmh01 ~]# ovs-vsctl show
Hello:
am really enjoying oVirt but have now hit an issue with iSCSI. As there is
only one NIC in the host I have had to enable an MTU of 9000 on ovirtmgmt.
Then have vNIC profiles on that interface which are using a custom hook for
Openvswitch. I have created a specific vLAN for iSCSI
Yasny dya...@gmail.com
To: Phil Daws ux...@splatnix.net
Cc: users users@ovirt.org
Sent: Friday, 21 November, 2014 1:39:32 AM
Subject: Re: [ovirt-users] Jumbo Frames
Why do you use OVS at all? If you have VLANs, all you need is to tag the mgmt
traffic, and create a VM traffic VLAN with a different
Dan:
How would you suggestion work as you can only assign one network to an
interface? as mentioned we only have one NIC in the server so hence using OVS
to VLAN.
Thanks, Phil
- Original Message -
From: Dan Yasny dya...@gmail.com
To: Phil Daws ux...@splatnix.net
Cc: users users
=^[a-zA-Z0-9_
---]+(:[a-zA-Z0-9_ ---]+|)$};prop={extnet_mtu=^[a-zA-Z0-9_ ---]+(:[a-zA-Z0-9_
---]+|)$}};'
but that just gave me a new property of 'prop' :)
Any help appreciated please.
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: Dan Yasny dya...@gmail.com
Cc
works with:
engine-config -s
CustomDeviceProperties='{type=interface;prop={extnet_ovs=^[a-zA-Z0-9_
---]+(:[a-zA-Z0-9_ ---]+|)$;extnet_mtu=^[a-zA-Z0-9_ ---]+(:[a-zA-Z0-9_
---]+|)$}};'
Now just need to sort out the Python code ;)
- Original Message -
From: Phil Daws ux...@splatnix.net
of range
so somehow I need to detect that element needs to be set.
Thanks, Phil
- Original Message -
From: Phil Daws ux...@splatnix.net
To: users users@ovirt.org
Sent: Friday, 21 November, 2014 10:16:48 AM
Subject: Re: [ovirt-users] Jumbo Frames
works with:
engine-config -s
= hooking.read_domxml()
addMTU(doc, mtusize)
hooking.write_domxml(doc)
- Original Message -
From: Antoni Segura Puimedon asegu...@redhat.com
To: Phil Daws ux...@splatnix.net
Cc: users users@ovirt.org
Sent: Friday, 21 November, 2014 11:40:10 AM
Subject: Re: [ovirt-users] Jumbo Frames
Any more ideas how I can get this working again please ? :(
- On 4 Nov, 2015, at 14:26, Phil Daws ux...@splatnix.net wrote:
> Hi Frank,
>
> Gave this a try by backleveling noVNC and still the same error :(
> --
> Regards, Phil
>
> - On 2 Nov, 2015, at 22:23, Fr
Hello,
I have been having an issue with noVNC where it would not connect too the
console of my machines.
So, I though I would take the plunge and upgrade the engine which is standalone
on a VM Workstation 10 guest running CentOS 6.
The steps I followed were:
# yum install
Hi Alex,
Fixed the issue!
It would appear that a previous coniguration in
/etc/ovirt-engine/osinfo.conf.d/10-osinfo.properties was causing the issue due
to missing parameters. I hashed out the entries and restart the engine and now
all is working fine, plus it has resolved my noVNC issue!
Hi Frank,
Gave this a try by backleveling noVNC and still the same error :(
--
Regards, Phil
- On 2 Nov, 2015, at 22:23, Frank Wall f...@moov.de wrote:
> Hi Phil,
>
> On Mon, Nov 02, 2015 at 04:38:14PM +0000, Phil Daws wrote:
>> have attempted to downgrade noVNC (novnc-0
Hello:
I upgraded my engine manager (ovirt-engine-3.5.0.1-1.el6.noarch) at the weekend
and noVNC is no longer working :( The error I am getting is:
Failed to connect to server (code: 1006)
have attempted to downgrade noVNC (novnc-0.4-7.el6.noarch) but it still down
not work. CA.crt has been
Hello,
I have upgraded my engine to 3.6 (el6) and would now like to do the same on my
3.5 (el7) node. The node was built using a minimal Centos7 ISO and then I
installed the 3.5 rpm.
How best would I go about performing the upgrade please ?
Thanks, Phil
50 matches
Mail list logo