You can add the node as a compute-only node and you will be able to 'consume'
the CPU and RAM of that host.
Best Regards,Strahil Nikolov
On Wed, Feb 17, 2021 at 16:25, dvx.mel...@gmail.com
wrote: Hi everyone,
I have a working installation of oVirt (4.3.5) with 4 physical servers : 1
For the migration you will need 2 new storage domains - one for the HE and
another for the VMs.For the VMs it's simple, while for the HE you will need to
backup and then restore on the new volume.
Best Regards,Strahil Nikolov
On Wed, Feb 17, 2021 at 11:23, Domenico Princi wrote:
Hi
Is it possible to create the VM in Ansible/Terraform or over the API ?What
happens when you create the VM without a disk and once created -> create and
attach the disk itself ?
Best Regards,Strahil Nikolov
On Mon, Feb 15, 2021 at 19:20, Edward Berger wr
,Strahil Nikolov
On Mon, Feb 15, 2021 at 18:16, tfe...@swissonline.ch
wrote: ___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code
Ehat happens when you try to import the first template ?
Best Regards,Strahil Nikolov
On Mon, Feb 15, 2021 at 14:36, Miguel Martín wrote:
Hello guys,
I found a problem when importing VMs from SDs and I filed
https://bugzilla.redhat.com/show_bug.cgi?id=1927199
Is there any possible
You can check /etc/hosts on all nodes.Also verify 'gluster volume list' output
from all hosts.
Best Regards,Strahil Nikolov
Hi
This is a far as I could get today. frustrating! I can't connect to
ovirt-gluster.whichelo.com after install. I can ping the ip no successfully
Have you tried rebooting the engine?
On Sun, Feb 14, 2021 at 4:18, tfe...@swissonline.ch
wrote: ___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Have you tried to set another host as SPM ?Also, you can mark the host was
rebooted ( I assume you got no power management configured) from Hosts -> 3
dots in upper right in UI.
Also check if sanlock, supervdsmd and vdsmd services are healthyand running.
Best Regards,Strahil Nikolov
On
According to the output, the task expected a dictionary but it's not.
What is the status of your firewalld ?
Best Regards,Strahil Nikolov
On Thu, Feb 11, 2021 at 16:59, lejeczek via Users wrote:
Hi,
I filed a bugzilla report about the problem a while ago, but
since I got so much better
What is the output of 'gluster volume info ' ?
Also, keep in mind that if you didn't use Cockpit to deploy the gluster, you
will need to apply the 'virt' group of options on that volume.
P.S.: I hope you know that the engine volume should host only the HostedEngine
VM.
Best Regards,Strahil
Check libvirt logs on both hosts for clues.Something is wrong with the disks.
Also check the status of the following services:- sanlock- vdsmd- supervdsm
Verify that all VGs are activated properly (especially if you use gluster).
Best Regards,Strahil Nikolov
On Wed, Feb 10, 2021 at 4:02, Ian
When uou create a blacklist file for the multipath, use
/etc/multipath/conf.d/.conf
Best Regards,Strahil Nikolov
Thanks -for some reason this part of it now makes sense!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email
I would go with CentOS 8 and then build from source.
Best Regards,Strahil Nikolov
On Tue, Feb 9, 2021 at 19:28, Shantur Rathore wrote:
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy
What is the output of 'lsblk -t' ?
Best Regards,Strahil Nikolov
Ovirt newbie here - using v 4.4.4
Have been trying for days to get this installed on my HP DL380p G6. I have 2
disk 170GB Raid 0 for OS and 6 x 330GB disk Raid 5 for Gluster. DNS all set up
(that took some working out
Did you disable NetworkManager.service ?
Best Regards,Strahil Nikolov___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct
I would then configure remote logging and wait for another crash.
Also, patch to latest OS/oVirt version (if possible).
Recently I figured out a similar case - 2 PCI NICs went bad.
Best Regards,Strahil Nikolov
On Mon, Feb 8, 2021 at 11:42, Francesco via Users wrote
I know several telecoms in Bulgaria use RHV, but they are small clients.
Yet, Openshift with 3 nodes looks quite difficult, while oVirt/RHV excells.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Fri, Feb 5, 2021 at 20:11, Uwe Laverenz wrote: Hi.
Am 03.02.21 um 08:56
I recently learned that gluster community is archiving the libgfapi stuff.I
think that a lot of effort was spent on FUSE to get it faster.When did anyone
compare them ?
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Fri, Feb 5, 2021 at 13:12, Guillaume
Pavese wrote
My first guess would be fencing.Fencing kicks in when there are network issues
or when the Hypervisor is stuck.
Check the engine's logs to verify that guess.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Fri, Feb 5, 2021 at 11:50, francesco--- via Users wrote:
Hi all
Yeah,
but without big software companies it will be quite hard. If Red Hat shifts to
Openshift, I am afraid that this project will be going into oblivion.
Best Regards,Strahil Nikolov
Similar question has been asked in "Is there a plan for ovirt 4.5 and furture
versions?"[1] thread.As
Hmmm... I'm also interested in that one.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
What is the future of oVirt with RHV 4.4 being the last RHV release? - see
https://access.redhat.com/support/policy/updates/rhev
With the release of RHV 4.4 Red Hat continues to invest
Sometimes, some of my VGs (gluster) are not activated, so if you run
hyperconverged -> you can 'vgchange -ay'.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Tue, Feb 2, 2021 at 11:28, Roderick Mooi wrote:
Hi!
We had a power outage and all our servers (oVirt hosts) went d
Are they building their own VMs or just cloning from a template ?
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
Help, banging my head against a wall.
Ovirt Engine Software Version:4.4.4.7-1.el8
RHEL 8.3
I have set up my cluster going to a TrueNAS storage. Everything
Why don't you go to VM settings and define that vm01 can run only on host_x?If
the host is down, it won't start on host_y.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Sat, Jan 30, 2021 at 23:09, LS CHENG wrote: Hi
I would like to know how AFFINITY GROUPS works.
I have 2
So you created that extra conf with this content but it didn't work ?multipath
-v4 could hint you why it was complaining.
Best Regards,Strahil Nikolov
devices {
device {
vendor "EQLOGIC"
product "100E-00"
;
> On the host still in 7 I have this for the same two luns:
>
> # multipath -l
> 36090a0c8d04f2fc4251c7c08d0a3 dm-14 EQLOGIC ,100E-00
> size=2.4T features='1 queue_if_no_path' hwhandler='0' wp=rw
> `-+- policy='round-robin 0' prio=0 status=acti
I would activate all vgs:check vdo (if used)
vgchange -aymount -asystemctl restart glusterd
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Fri, Jan 29, 2021 at 10:52, Marcel d'Heureuse wrote:
Please find attached the picture.
I can't conect via ssh to that server because
I don't know about such feature, but I guess you can:- remove host from engine-
remove and install Network Manager (yum remove and then yum install)
The safest approach would be to:- remove host from engine- reinstall the system
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
If you system will have only Gluster -> you can blacklist everything in
multipath.But imagine you have gluster and also SAN or iSCSI -> then you need
to blacklist only local disks that Gluster uses, but not the SAN.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On We
wwid ST500NM0011_Z1M00LM7
wwid WDC_WD5003ABYX-01WERA0_WD-WMAYP2303189 wwid
WDC_WD15EADS-00P8B0_WD-WMAVU0885453 wwid
WDC_WD5003ABYZ-011FA0_WD-WMAYP0F35PJ4}
Keep in mind 'devnode *' is OK only for gluster-only machine.
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
Nope,
just update it (this is just an example, check postgresql docu for the UPDATE
statement):UPDATE dwh_history_timekeeping SET lastSampling = '2021-01-26 11
11:00:01.131+00';
Same for all fields having the time in the future.
Bedt Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
evs will say required)
that you have a separate datastore for the HostedEngine and no VMs
should be hosted there.
That's why the cockpit deployment is creating a dedicated volume.
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To
First of all ,
verify the gluster volume options (gluster volume info ;
gluster volume status ).When you use HCI, ovirt sets up a lot
of optimized options in order to gain the maximum of the Gluster
storage.
Best Regards,Strahil Nikolov
В 15:03 + на 25.01.2021 (пн), Robert Tongue написа
, disk2 - storage2) , but there
are workarounds for that too.
Stream is still buggy and I'm considering using RHEL 8 with the new DEV
subscription.
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...
Yes it can.
Sent from Yahoo Mail on Android
Hi, Am new using oVirt and i would like to know if i could deploy oVirt and
be able to use it to deploy and manage Gluster storage.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an
Can you try to alter the share options like this (check for typos as I am
typing by memory):anonuid=36,anongid=36, all_squash
And of course export a fresh one:
Best Regards,Strahil Nikolov
Sent from Yahoo Mail on Android
On Mon, Jan 25, 2021 at 0:51, Matt Snow wrote
I guess the name in the NIC can be used for that purpose.
Best Regards,Strahil Nikolov
and in order to assign IP using cloud-init, "In-guest Network Interface Name"
field should be filled but how to know that name in advance?
___
Users ma
В 14:41 + на 23.01.2021 (сб), Florian Schmid via Users написа:
> Hi Strahil,
>
> thank you very much for the information.
>
> Now the question is, will oVirt stay 100 % compatible to RH?
It should, but it it might have issues like we got with ovirt 4.4
(cluster compatibility
,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines
Try using the 'source /opt/rh/rh-postgresql95/enable'
Best Regards,Strahil Nikolov
В 19:53 + на 22.01.2021 (пт), José Ferradeira via Users написа:
> The postgres is older than 10:
> postgresql-jdbc-9.2.1002-6.el7_5.noarch
> postgresql-libs-9.2.23-3.el7_4.x86_64
> rh-postgresql9
It worked for me , but my HE is 4.3.10.
Best Regards,Strahil Nikolov
В 16:39 + на 22.01.2021 (пт), José Ferradeira via Users написа:
> Hello,
>
> # su - postgres
> -bash-4.2$ source /opt/rh/rh-postgresql10/enable
> -bash: /opt/rh/rh-postgresql10/enable: No such file or direct
t: success
> [root@gluster1 ~]#
>
You don't need to do it manually, there is a an option in Admin portal
-> Storage -> Volumes -> Select Volume -> "three dots in upper right"
-> Optimize for Virt Store
Best Regards,
Strahil Nikolov
___
I think it's easier to get the Vmware's CA certificate and import it on
all hosts + engine and trust it.By default you should put it at
/etc/pki/ca-trust/source/anchors/ and then use "update-ca-trust" to
make all certs signed by the Vmware vCenter's CA trusted.
Best Regards,Strahil Nik
Hm... this sounds bad . If it was deleted by oVirt, it would ask you whether to
remove the disk or not and would wipe the VM configuration.
Most probably you got a data corruption there . Are you using TrueNAS ?
Best Regards,
Strahil Nikolov
В вторник, 19 януари 2021 г., 00:06:15 Гринуич
Most probably the dwh is far in the future.
The following is not the correct procedure , but it works:
ssh root@engine
su - postgres
source /opt/rh/rh-postgresql10/enable
psql engine
engine=# select * from dwh_history_timekeeping ;
Best Regards,
Strahil Nikolov
В понеделник, 18 януари
I think that it's complaining for the firewall. Try to restore with running
firewalld.
Best Regards,
Strahil Nikolov
В понеделник, 18 януари 2021 г., 17:52:04 Гринуич+2, penguin pages
написа:
Following document to redploy engine...
https://access.redhat.com/documentation/en-us
Most probably it will be easier if you stick with full-blown distro.
@Sandro Bonazzola can help with CEPH status.
Best Regards,Strahil Nikolov
В понеделник, 18 януари 2021 г., 11:44:32 Гринуич+2, Shantur Rathore
написа:
Thanks Strahil for your reply.
Sorry just to confirm,
1
Are you sure that ovirt doesn't still use it (storage domains)?
Best Regards,
Strahil Nikolov
В понеделник, 18 януари 2021 г., 09:11:18 Гринуич+2, Christian Reiss
написа:
Update:
I found out that 4a62cdb4-b314-4c7f-804e-8e7275518a7f is an iscsi target
outside of gluster
В 15:51 + на 17.01.2021 (нд), Shantur Rathore написа:
> Hi Strahil,
> Thanks for your reply, I have 16 nodes for now but more on the way.
>
> The reason why Ceph appeals me over Gluster because of the following
> reasons.
>
> 1. I have more experience with Ceph than Gl
What is the output of 'lsblk -t' on all nodes ?
Best Regards,
Strahil NIkolov692371
В 11:19 +0100 на 17.01.2021 (нд), Christian Reiss написа:
> Hey folks,
>
> quick (I hope) question: On my 3-node cluster I am swapping out all
> the
> SSDs with fewer but higher capacity ones
Hi,
can you share what procedure/steps you have implemented and when the issue
occurs ?
Best Regards,
Strahil Nikolov
В неделя, 17 януари 2021 г., 10:40:57 Гринуич+2, Keith Forman via Users
написа:
Hi
Need help with setting up Ovirt.
engine-setup run successfully on CentOS 7
Regards,
Strahil Nikolov
В неделя, 17 януари 2021 г., 10:37:57 Гринуич+2, Shantur Rathore
написа:
Hi all,
I am planning my new oVirt cluster on Apple hosts. These hosts can only have
one disk which I plan to partition and use for hyper converged setup. As this
is my first oVirt
roker
first.
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/communi
f it complains about network vdsm-ovirtmgmt missing, you can also
define it via virsh:
# cat vdsm-ovirtmgmt.xml
vdsm-ovirtmgmt
8ded486e-e681-4754-af4b-5737c2b05405
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt
up wizard, but use the
> "engine" volume and so retain the VMs and templates?
You are not expected to mix HostedEngine and other VMs on the same
storage domain (gluster volume).
Best Regards,
Strahil Nikolov
>
>
>
> ___
> Use
Can you share both ovirt and gluster logs ?
Best Regards,
Strahil Nikolov
В четвъртък, 14 януари 2021 г., 20:18:03 Гринуич+2, Charles Lam
написа:
Thank you Strahil. I have installed/updated:
dnf install --enablerepo="baseos" --enablerepo="appstream"
As those are brand new,
try to install the gluster v8 repo and update the nodes to 8.3 and
then rerun the deployment:
yum install centos-release-gluster8.noarch
yum update
Best Regards,
Strahil Nikolov
В 23:37 + на 13.01.2021 (ср), Charles Lam написа:
> Dear Friends:
>
> I am st
tOS 8 will be dead soon.
Both cases it's not nice. If you need to add the node now, use CentOS 8
and later convert it to Stream.
> I don’t use pre-built node ISO since I have a number of custom
> scripts running on node host OS.
>
> Thanks in advance.
> Andr
-ports:
icmp-blocks:
rich rules:
Best Regards,
Strahil Nikolov
В 05:25 +0800 на 13.01.2021 (ср), tommy написа:
> I encountered the question too.
>
> The follow file is the connect file for vm that can connect using
> remote viewer:
>
> [virt-viewer]
> type=vnc
> h
from both clusters and identify the problem.
Have you compared the firewalld ports on 2 nodes (old and new cluster)
?
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Priva
hat
> does it look like? Or do you mean the linux mtime?
I got confused by the name... I just checked on my cluster and it's
binary.
Just "stat" the file from the mount point in /rhev/data-
center/mnt/glusterSD/:_ mount point and it should get
healed.
В 09:41 + на 12.01.2021 (вт), dhanaraj.ramesh--- via Users написа:
> v2v-conversion-host-wrapper
I think the package names are virt-v2v and virt-v2v-wrapper.
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscr
^$|#" /etc/lvm/lvm.conf | grep filter
VDO is using lvm.conf too, so it could cause strange issues. What
happens when the deployment fails and you rerun (ansible should be
idempotent) ?
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@o
.. yet rsync is far simpler for most users ;)
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Con
e rest.
If gluster keeps showing that the file is still needing heal - just
"cat" it from the FUSE client (the mountpoint in /rhev/).
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@o
This sounds like firewall issue.
Best Regards,
Strahil Nikolov
В понеделник, 11 януари 2021 г., 01:05:47 Гринуич+2, Matthew Stier
написа:
I've added several new hosts to my data center, and instead of adding them to
my 'default' cluster, I created a new cluster ('two').
I can
Hi Bernardo,
I think that when CentOS Stream 9 (and all EL 9 clones) come up - oVirt will
switch , so I think it's worth trying the Stream (but no earlier than April).
Best Regards,
Strahil Nikolov
В неделя, 10 януари 2021 г., 09:32:01 Гринуич+2, Bernardo Juanicó
написа:
Hello
n open a github issue at
https://github.com/oVirt/ovirt-ansible-engine-setup/issues
Best Regards,
Strahil Nikolov
В събота, 9 януари 2021 г., 01:24:56 Гринуич+2, Charles Lam
написа:
Dear Strahil,
I have rebuilt everything fresh, switches, hosts, cabling - PHY-SEC shows 512
for
Are you sure that the problem is not in the HostedEngine ?
Sync your host and then verify the situation on the HE
Best Regards,
Strahil Nikolov
В четвъртък, 7 януари 2021 г., 11:46:09 Гринуич+2, Nathanaël Blanchet
написа:
Hello,
Engine complains about my fresh el8 ovirt 4.4.3
Sharon , what about a nginx/apache listening on different virtual hosts
and redirecting (actually proxying) to the correct portal ?
Do you think that it could work (the certs will not be trusted, but
they can take the exception) ?
Best Regards,Strahil Nikolov
В 17:24 +0200 на 06.01.2021 (ср
Have you tried to put a host into maintenance, remove and then readd it ?
You can access all Red Hat solutions with their free developer subscription.
Best Regards,
Strahil Nikolov
В сряда, 6 януари 2021 г., 13:17:42 Гринуич+2, Gary Lloyd
написа:
Hi please could someone
oVirt 4.4 can seal EL8
Templates). I'm now building VMs and creating snapshots, as I can
easily revert back any changes and start new stuff.
I think Ansible is the most popular and supported choice for managing oVirt.
Yet, I like the idea for Terraform.
Best Regards,
Strahil Nikolov
hus it might be a
little bit unstable. I would recommend you to wait till the begining of
Q2 2021 before you evaluate it.
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.
It's about launching a VM , so just try to power off and it should cancel the
launch.
Best Regards,
Strahil Nikolov
В вторник, 5 януари 2021 г., 06:52:24 Гринуич+2, tommy
написа:
Hi, everyone:
How to cancel a longtime running task on ovirt web interface ?
Task looks can
> I wonder what other folks are using or if someone has any suggestions
> to offer.
I'm using Ansible do deploy some stuff from templates.
I think that terraform is also used with oVirt, so you can give it a
try.
Best Regards,
Strahil Nikolov
___
В 17:16 + на 04.01.2021 (пн), Diggy Mc написа:
> Running oVirt 4.3.9 and would like to move the HostedEngine VM in its
> entirety (disks, templates, etc) from its current data domain to a
> new one. How can this be done?
The most tested way is using backup & restore.
Best Reg
Sadly my oriental language skills are close to "0".
Can you share the screenshot with English menu or to provide the steps which
you have executed (menu after menu) to reach that state ?
Best Regards,
Strahil Nikolov
В понеделник, 4 януари 2021 г., 12:48:55 Гринуич+2, tomm
Hi All,
I noticed that Red Hat Gluster Storage Console is based on oVirt's web
interface.
Does anyone know how to deploy it on CentOS 8 for managing Gluster v8.X ?
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe
Hi Ilan,
Do you know how to use the config for disk_upload.py (or the --engine-url,
--username, --password-file or --cafile params) on 4.3.10 as I had to directly
edit the script ?
Best Regards,
Strahil Nikolov
В четвъртък, 31 декември 2020 г., 00:07:06 Гринуич+2, Jorge Visentini
Are you using E1000 on the VMs or on the Host ?
If it's the second , you should change the hardware .
I have never used e1000 for VMs as it is an old tech. Better to install the
virtio drivers and then use the virtio type of NIC.
Best Regards,
Strahil Nikolov
В четвъртък, 31 декември 2020
essible by that new cluster.
Then to migrate, you just need to power off the VM, Edit -> change
cluster, network, etc and power it up.
It will start on the hosts in the new cluster and then you just need to
verify that the application is working properly.
ighly Available?
High Availability and Host fencing are the 2 parts that you need to
ensure that the VM will be restarted after a failure.
If you storage domain goes bad, the VMs will be paused and
theoretically they will be resumed automatically when the storage
domain is back.
Best Regards,
Are you uploading to 4.4 or to the old 4.3 ?
I'm asking as there should be an enhancement that makes a checksum on the
uploads in order to verify that the upload was successfull.
Best Regards,
Strahil Nikolov
В сряда, 30 декември 2020 г., 18:37:52 Гринуич+2, Jorge Visentini
написа
Maybe there is a missing package that is preventing that.
Let's see what the devs will find out next year (thankfully you wpn't have to
wait much).
Best Regards,
Strahil Nikolov
В сряда, 30 декември 2020 г., 16:30:37 Гринуич+2, Gilboa Davara
написа:
Short update.
1. Ran ovirt
There is some issue with the dns. Check the A/ and PTR records are correct
for the Hosted Engine .
Best Regards,
Strahil Nikolov
В понеделник, 28 декември 2020 г., 22:15:14 Гринуич+2, lejeczek via Users
написа:
hi chaps,
a newcomer here. I use cockpit to deploy hosted engine
and then restore that backup using the new
storage domain and the node that was in maintenance...
As I have never restored my oVirt Manager , I can't provide more help.
Best Regards,
Strahil Nikolov
В понеделник, 28 декември 2020 г., 19:40:15 Гринуич+2, Nur Imam Febrianto
написа
Imam Febrianto
написа:
What kind of situation is that ? If so, how can I migrate my hosted engine into
another storage domain ?
Regards,
Nur Imam Febrianto
From: Strahil Nikolov
Sent: 29 December 2020 0:31
To: oVirt Users; Nur Imam Febrianto
Subject: Re: [ovirt-users] New
on one storage domain, but >the storage domain
>is not exlusively used by Hosted Engine, we use it too >for other VM. Are this
>OK or it have a side impact ?
Avoid using HostedEngine's storage domain for other VMs.You might get into
situation that you want to avoi
I'm not sure if the templates are automatically transferred , but it's worth
checking before detaching the storage.
Best Regards,
Strahil Nikolov
В понеделник, 28 декември 2020 г., 18:53:27 Гринуич+2, Diggy Mc
написа:
Templates? Aren't the VM's templates automatically copied
Vinius,
does your storage provide dedpulication ? If yes, then you can provide a new
thin-provisioned LUN and migrate the data from the old LUN to the new one.
Best Regards,
Strahil Nikolov
В понеделник, 28 декември 2020 г., 18:27:38 Гринуич+2, Vinícius Ferrão via
Users написа:
Hi
can attach it to 4.4 and migrate those VMs. And don't forget the templates the
VMs were created from.
Best Regards,
Strahil Nikolov
В понеделник, 28 декември 2020 г., 13:10:01 Гринуич+2, Diggy Mc
написа:
Is it safe to attach my new 4.4 environment to an export domain at the same
time
migration , but as
oVirt (and most probably OLVM) requires some external repos - it will
take some preparation.
Do you think that it's more reasonable to just reinstall one of the
nodes to OEL 8 and then deploy the HE from backup (once 4.4 is
available) ?
Then migrating the rest
is about OLVM 4.2 + OEL 7 .
Happy Hollidays!
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt
В 19:35 + на 25.12.2020 (пт), James Loker-Steele via Users написа:
> Yes.
> We use OEL and have setup oracles branded ovirt as well as test ovirt
> on oracle and it works a treat.
Hey James,
is Oracle 's version of oVirt paid ?
Best Regards,
Strahi
.
It should be ,as Oracle has their own OLVM:
https://blogs.oracle.com/virtualization/announcing-oracle-linux-virtualization-manager-43
Merry Christmas !
Best Regards,
Strahil Nikolov
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email
Any hints in vdsm logs on the affected host or on the
broker.log/agent.log ?
Happy Hollidays to everyone!
Best Regards,Strahil Nikolov
В 14:33 +0200 на 25.12.2020 (пт), Gilboa Davara написа:
> Hello,
>
> Reinstall w/ redeploy produced the same results.
>
> - Gilboa
>
>
&
Can you enable debug logs on the host hosting the Hosted Engine ?
Details can be found on
https://www.ovirt.org/develop/developer-guide/vdsm/log-files.html
Merry Christmas to all !
Best Regards,
Strahil Nikolov
В петък, 25 декември 2020 г., 07:24:32 Гринуич+2, ozme...@hotmail.com
create the
> necessary /etc/ovirt-hosted-engine/hosted-engine.conf configuration
> on the new hosts, preventing ovirt-ha-* services from starting.
>
So , set the host into maintenance and
then select installation -> reinstall -> Hosted Engine -> Deploy
Best Regards,
Strahil Nikolov
Hi Latcho,
would you mind to open a bug in bugzilla.redhat.com next year ?
Best Regards,Strahil Nikolov
В 11:09 + на 24.12.2020 (чт), Latchezar Filtchev написа:
>
> Hello ,
>
> I think I resolved this issue. It is dig response when resolving the
> domain name!
>
Are you sure you have installed them with HE support ?
Best Regards,Strahil NikolovВ 19:06 +0200 на 23.12.2020 (ср), Gilboa
Davara написа:
> On Wed, Dec 23, 2020 at 6:28 PM Gilboa Davara
> wrote:
> > On Wed, Dec 23, 2020 at 6:20 PM Gilboa Davara
> > wrote:
> > > On Tu
601 - 700 of 1946 matches
Mail list logo