[ovirt-users] Re: Engine installation failed at - get local vm ip
Hi, Let me first clarify my infrastructure. I've configured 3 nested ovirt node on Vmware esxi 6.7. Enabled hardware assisted virtualization in ovirt vms. Please confirm compatibility for ovirt on vmware nested virtualization. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Thu, Feb 14, 2019 at 2:04 PM Simone Tiraboschi wrote: > Hi, > you > ovirt-hosted-engine-setup-ansible-bootstrap_local_vm-20191915333-gki5ri.log > is just 651 bytes long with no real error inside but the file seams > abruptly truncated; > I don't understand if it happened when you compressed the log archive or > if the setup process got somehow killed. > Without a complete log file is really hard to telly you what happened. > > > On Thu, Feb 14, 2019 at 6:52 AM Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> Hi, >> >> I am still facing this issue. Any help would be appreciated. >> >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> >> >> On Sun, Feb 10, 2019 at 9:36 PM Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> Hi, >>> >>> Please find logs. >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> >>> On Sun, Feb 10, 2019 at 1:40 AM Simone Tiraboschi >>> wrote: >>> >>>> >>>> >>>> On Sat, Feb 9, 2019 at 9:40 AM Tailor, Bharat < >>>> bha...@synergysystemsindia.com> wrote: >>>> >>>>> Hi Simone, >>>>> >>>>> Any suggestions to troubleshoot this issue. I've gone through many >>>>> community threads but didn't get relevant answer. >>>>> >>>> >>>> Can you please share the whole /var/log/ovirt-hosted-engine-setup ? >>>> otherwise it's really difficult guessing what happened. >>>> >>>> >>>>> >>>>> On Sat, Feb 9, 2019, 12:55 AM Tailor, Bharat < >>>>> bha...@synergysystemsindia.com wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I am trying to configure with static ip address. >>>>>> I don't have any dns server so using dns entry in /etc/hosts file. >>>>>> Didn't try to set anything about mac address. going with system >>>>>> generated settings only. >>>>>> >>>>>> Regrards >>>>>> Bharat Kumar >>>>>> >>>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>>> Udaipur (Raj.) >>>>>> 313001 >>>>>> Mob: +91-9950-9960-25 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Sat, Feb 9, 2019 at 12:40 AM Simone Tiraboschi < >>>>>> stira...@redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < >>>>>>> bha...@synergysystemsindia.com> wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I am trying to test ovirt hyperconverged setup. I've a dell server >>>>>>>> & using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw >>>>>>>> exposed. >>>>>>>> >>>>>>>> VM1 - Ovirt node 4.2 >>>>>>>> 18GB RAM >>>>>>>> 2*2 vcpu >>>>>>>> nic 1 - for backend gluster >>>>>>>> nic 2 - for frontend vm network >>>>>>>> >>>>>>>> VM2 - Ovirt node 4.2 >>>>>>>> 18GB RAM >>>>>>>> 2*2 vcpu >>>>>>>> nic 1 - for backend gluster >>>>>>>> nic 2 - for frontend vm network >>>>>>>> >>>>>>>> VM3- Ovirt node 4.2 >>>>>>>> 18GB RAM >>>>>>>> 2*2 vcpu >>>>>>>> nic 1 - for backend gluster
[ovirt-users] Re: Engine installation failed at - get local vm ip
Hi, I am still facing this issue. Any help would be appreciated. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Sun, Feb 10, 2019 at 9:36 PM Tailor, Bharat < bha...@synergysystemsindia.com> wrote: > Hi, > > Please find logs. > > Regrards > Bharat Kumar > > G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad > Udaipur (Raj.) > 313001 > Mob: +91-9950-9960-25 > > > > > > > On Sun, Feb 10, 2019 at 1:40 AM Simone Tiraboschi > wrote: > >> >> >> On Sat, Feb 9, 2019 at 9:40 AM Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> Hi Simone, >>> >>> Any suggestions to troubleshoot this issue. I've gone through many >>> community threads but didn't get relevant answer. >>> >> >> Can you please share the whole /var/log/ovirt-hosted-engine-setup ? >> otherwise it's really difficult guessing what happened. >> >> >>> >>> On Sat, Feb 9, 2019, 12:55 AM Tailor, Bharat < >>> bha...@synergysystemsindia.com wrote: >>> >>>> Hi, >>>> >>>> I am trying to configure with static ip address. >>>> I don't have any dns server so using dns entry in /etc/hosts file. >>>> Didn't try to set anything about mac address. going with system >>>> generated settings only. >>>> >>>> Regrards >>>> Bharat Kumar >>>> >>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>> Udaipur (Raj.) >>>> 313001 >>>> Mob: +91-9950-9960-25 >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Sat, Feb 9, 2019 at 12:40 AM Simone Tiraboschi >>>> wrote: >>>> >>>>> >>>>> >>>>> On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < >>>>> bha...@synergysystemsindia.com> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I am trying to test ovirt hyperconverged setup. I've a dell server & >>>>>> using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. >>>>>> >>>>>> VM1 - Ovirt node 4.2 >>>>>> 18GB RAM >>>>>> 2*2 vcpu >>>>>> nic 1 - for backend gluster >>>>>> nic 2 - for frontend vm network >>>>>> >>>>>> VM2 - Ovirt node 4.2 >>>>>> 18GB RAM >>>>>> 2*2 vcpu >>>>>> nic 1 - for backend gluster >>>>>> nic 2 - for frontend vm network >>>>>> >>>>>> VM3- Ovirt node 4.2 >>>>>> 18GB RAM >>>>>> 2*2 vcpu >>>>>> nic 1 - for backend gluster >>>>>> nic 2 - for frontend vm network >>>>>> >>>>>> I've configured gluster storage from cockpit and now trying to >>>>>> install engine from same cockpit but setup failed at "get local vm ip". >>>>>> I've gone through /var/log/ovirt-hosted-engine-setup file also but >>>>>> there are so many log files and I haven't find any related logs. Please >>>>>> help me to get out of it. >>>>>> >>>>> >>>>> Did you choose to configure the engine VM with a static address or >>>>> with DHCP? if so, do you have a proper address reservation for that mac >>>>> address? >>>>> Is the DNS correctly working? >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> Regrards >>>>>> Bharat Kumar >>>>>> >>>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>>> Udaipur (Raj.) >>>>>> 313001 >>>>>> Mob: +91-9950-9960-25 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ___ >>>>>> Users mailing list -- users@ovirt.org >>>>>> To unsubscribe send an email to users-le...@ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>> oVirt Code of Conduct: >>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>> List Archives: >>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3K34XKKGCIVNDFONFE4BCZUTLR32P7C/ >>>>>> >>>>> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/V3T6VSEOTOAOXZ7PIVXNLLONIBI4HIAA/
[ovirt-users] Re: Engine installation failed at - get local vm ip
Hi, Please find logs. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Sun, Feb 10, 2019 at 1:40 AM Simone Tiraboschi wrote: > > > On Sat, Feb 9, 2019 at 9:40 AM Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> Hi Simone, >> >> Any suggestions to troubleshoot this issue. I've gone through many >> community threads but didn't get relevant answer. >> > > Can you please share the whole /var/log/ovirt-hosted-engine-setup ? > otherwise it's really difficult guessing what happened. > > >> >> On Sat, Feb 9, 2019, 12:55 AM Tailor, Bharat < >> bha...@synergysystemsindia.com wrote: >> >>> Hi, >>> >>> I am trying to configure with static ip address. >>> I don't have any dns server so using dns entry in /etc/hosts file. >>> Didn't try to set anything about mac address. going with system >>> generated settings only. >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> >>> On Sat, Feb 9, 2019 at 12:40 AM Simone Tiraboschi >>> wrote: >>> >>>> >>>> >>>> On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < >>>> bha...@synergysystemsindia.com> wrote: >>>> >>>>> Hi, >>>>> >>>>> I am trying to test ovirt hyperconverged setup. I've a dell server & >>>>> using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. >>>>> >>>>> VM1 - Ovirt node 4.2 >>>>> 18GB RAM >>>>> 2*2 vcpu >>>>> nic 1 - for backend gluster >>>>> nic 2 - for frontend vm network >>>>> >>>>> VM2 - Ovirt node 4.2 >>>>> 18GB RAM >>>>> 2*2 vcpu >>>>> nic 1 - for backend gluster >>>>> nic 2 - for frontend vm network >>>>> >>>>> VM3- Ovirt node 4.2 >>>>> 18GB RAM >>>>> 2*2 vcpu >>>>> nic 1 - for backend gluster >>>>> nic 2 - for frontend vm network >>>>> >>>>> I've configured gluster storage from cockpit and now trying to install >>>>> engine from same cockpit but setup failed at "get local vm ip". >>>>> I've gone through /var/log/ovirt-hosted-engine-setup file also but >>>>> there are so many log files and I haven't find any related logs. Please >>>>> help me to get out of it. >>>>> >>>> >>>> Did you choose to configure the engine VM with a static address or with >>>> DHCP? if so, do you have a proper address reservation for that mac address? >>>> Is the DNS correctly working? >>>> >>>> >>>> >>>>> >>>>> >>>>> >>>>> Regrards >>>>> Bharat Kumar >>>>> >>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>> Udaipur (Raj.) >>>>> 313001 >>>>> Mob: +91-9950-9960-25 >>>>> >>>>> >>>>> >>>>> >>>>> ___ >>>>> Users mailing list -- users@ovirt.org >>>>> To unsubscribe send an email to users-le...@ovirt.org >>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>> oVirt Code of Conduct: >>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>> List Archives: >>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3K34XKKGCIVNDFONFE4BCZUTLR32P7C/ >>>>> >>>> ovirt-hosted-engine-setup.rar Description: Binary data ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UJAXX5Z4OI2I5UJYRTXB2UVOIVLGYQIC/
[ovirt-users] Re: Engine installation failed at - get local vm ip
Hi Simone, Any suggestions to troubleshoot this issue. I've gone through many community threads but didn't get relevant answer. On Sat, Feb 9, 2019, 12:55 AM Tailor, Bharat Hi, > > I am trying to configure with static ip address. > I don't have any dns server so using dns entry in /etc/hosts file. > Didn't try to set anything about mac address. going with system generated > settings only. > > Regrards > Bharat Kumar > > G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad > Udaipur (Raj.) > 313001 > Mob: +91-9950-9960-25 > > > > > > > On Sat, Feb 9, 2019 at 12:40 AM Simone Tiraboschi > wrote: > >> >> >> On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> Hi, >>> >>> I am trying to test ovirt hyperconverged setup. I've a dell server & >>> using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. >>> >>> VM1 - Ovirt node 4.2 >>> 18GB RAM >>> 2*2 vcpu >>> nic 1 - for backend gluster >>> nic 2 - for frontend vm network >>> >>> VM2 - Ovirt node 4.2 >>> 18GB RAM >>> 2*2 vcpu >>> nic 1 - for backend gluster >>> nic 2 - for frontend vm network >>> >>> VM3- Ovirt node 4.2 >>> 18GB RAM >>> 2*2 vcpu >>> nic 1 - for backend gluster >>> nic 2 - for frontend vm network >>> >>> I've configured gluster storage from cockpit and now trying to install >>> engine from same cockpit but setup failed at "get local vm ip". >>> I've gone through /var/log/ovirt-hosted-engine-setup file also but there >>> are so many log files and I haven't find any related logs. Please help me >>> to get out of it. >>> >> >> Did you choose to configure the engine VM with a static address or with >> DHCP? if so, do you have a proper address reservation for that mac address? >> Is the DNS correctly working? >> >> >> >>> >>> >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> ___ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3K34XKKGCIVNDFONFE4BCZUTLR32P7C/ >>> >> ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UCCBLEE3GBCSMQQZ4Z7IIUZ35RXQN5FX/
[ovirt-users] Re: Engine installation failed at - get local vm ip
Hi, I am trying to configure with static ip address. I don't have any dns server so using dns entry in /etc/hosts file. Didn't try to set anything about mac address. going with system generated settings only. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Sat, Feb 9, 2019 at 12:40 AM Simone Tiraboschi wrote: > > > On Fri, Feb 8, 2019 at 7:49 PM Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> Hi, >> >> I am trying to test ovirt hyperconverged setup. I've a dell server & >> using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. >> >> VM1 - Ovirt node 4.2 >> 18GB RAM >> 2*2 vcpu >> nic 1 - for backend gluster >> nic 2 - for frontend vm network >> >> VM2 - Ovirt node 4.2 >> 18GB RAM >> 2*2 vcpu >> nic 1 - for backend gluster >> nic 2 - for frontend vm network >> >> VM3- Ovirt node 4.2 >> 18GB RAM >> 2*2 vcpu >> nic 1 - for backend gluster >> nic 2 - for frontend vm network >> >> I've configured gluster storage from cockpit and now trying to install >> engine from same cockpit but setup failed at "get local vm ip". >> I've gone through /var/log/ovirt-hosted-engine-setup file also but there >> are so many log files and I haven't find any related logs. Please help me >> to get out of it. >> > > Did you choose to configure the engine VM with a static address or with > DHCP? if so, do you have a proper address reservation for that mac address? > Is the DNS correctly working? > > > >> >> >> >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3K34XKKGCIVNDFONFE4BCZUTLR32P7C/ >> > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UWP4VG4W4VVGAQMUL5IVSSO33MNS52KN/
[ovirt-users] Engine installation failed at - get local vm ip
Hi, I am trying to test ovirt hyperconverged setup. I've a dell server & using vmware ESXi 6.7 as hypervisor. Prepared 3 VMs with cpu hw exposed. VM1 - Ovirt node 4.2 18GB RAM 2*2 vcpu nic 1 - for backend gluster nic 2 - for frontend vm network VM2 - Ovirt node 4.2 18GB RAM 2*2 vcpu nic 1 - for backend gluster nic 2 - for frontend vm network VM3- Ovirt node 4.2 18GB RAM 2*2 vcpu nic 1 - for backend gluster nic 2 - for frontend vm network I've configured gluster storage from cockpit and now trying to install engine from same cockpit but setup failed at "get local vm ip". I've gone through /var/log/ovirt-hosted-engine-setup file also but there are so many log files and I haven't find any related logs. Please help me to get out of it. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Q3K34XKKGCIVNDFONFE4BCZUTLR32P7C/
Re: [ovirt-users] Hyper converged network setup
Hi, I've reinstalled Centos minimal on 3 hosts. Configured replica 3 gluster storage for engine & data. Configured dns entry in /etc/hosts for all three host and ovirt engine also. *yum install ovirt-engine-appliance* *hosted-engine --deploy* Choose glusterfs storage for engine. Installation failed at last step "This system is not reliable". My host have low memory & processor so don't know it might be the issue. Please help. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Fri, Sep 15, 2017 at 12:51 PM, Tailor, Bharat < bha...@synergysystemsindia.com> wrote: > Hi, > > Any help from you guys would be appreciated. > > Regrards > Bharat Kumar > > G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad > Udaipur (Raj.) > 313001 > Mob: +91-9950-9960-25 > > > > > > On Thu, Sep 14, 2017 at 7:02 PM, Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> Hi, >> >> I've reinstall Centos7 Minimal on all three hosts. Installed Ovirt self >> hosted ova 4.1 on test1.localdomain. >> After installation completed, I got an error like engine vm is >> unreachable. I am able to ping engine from both IP and FQDN but unable to >> access it in browser. When I check engine VM status I got an error "Failed >> to connect to broker". >> I've enclosed engine-vm config snap and Error snap for more details. Kind >> help to resolve it. >> >> >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> >> On Wed, Sep 13, 2017 at 5:14 PM, Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> I can't. I've destroyed that VM and clean all files. Now I am trying to >>> reinstall new engine VM. >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> On Wed, Sep 13, 2017 at 5:12 PM, Donny Davis <do...@fortnebula.com> >>> wrote: >>> >>>> Can you ping the VM when it comes up? >>>> >>>> On Wed, Sep 13, 2017 at 7:40 AM, Tailor, Bharat < >>>> bha...@synergysystemsindia.com> wrote: >>>> >>>>> I am not using any DNS server. I have made entries in /etc/hosts for >>>>> all Nodes and for engine VM also. >>>>> >>>>> Regrards >>>>> Bharat Kumar >>>>> >>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>> Udaipur (Raj.) >>>>> 313001 >>>>> Mob: +91-9950-9960-25 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis <do...@fortnebula.com> >>>>> wrote: >>>>> >>>>>> Bharat, >>>>>> >>>>>> Are you using DNS for host names or /etc/hosts >>>>>> >>>>>> I personally place the engines hostname with ip address in /etc/hosts >>>>>> on all the hypervisors in case my DNS services go down. >>>>>> I also put the hypervisors in /etc/hosts too >>>>>> >>>>>> Hope this helps. >>>>>> >>>>>> On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul <yk...@redhat.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat < >>>>>>> bha...@synergysystemsindia.com> wrote: >>>>>>> >>>>>>>> Hi Charles & Donny, >>>>>>>> >>>>>>>> Thank you so much. >>>>>>>> >>>>>>>> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above >>>>>>>> mail). >>>>>>>> I was trying to install ovirt ova on test2.localdomain. I've >>>>>>>> cleared all the steps and at last I got a message like "Engine is still >>>>>>>> unreachable". Kindly help me to troubleshoot it. >>>>>>>> >>>>>>>> @Ykaul How can I register myself in mailing list? >>>>>>>> >>>>>>> >&
Re: [ovirt-users] Hyper converged network setup
Hi, Any help from you guys would be appreciated. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Thu, Sep 14, 2017 at 7:02 PM, Tailor, Bharat < bha...@synergysystemsindia.com> wrote: > Hi, > > I've reinstall Centos7 Minimal on all three hosts. Installed Ovirt self > hosted ova 4.1 on test1.localdomain. > After installation completed, I got an error like engine vm is > unreachable. I am able to ping engine from both IP and FQDN but unable to > access it in browser. When I check engine VM status I got an error "Failed > to connect to broker". > I've enclosed engine-vm config snap and Error snap for more details. Kind > help to resolve it. > > > Regrards > Bharat Kumar > > G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad > Udaipur (Raj.) > 313001 > Mob: +91-9950-9960-25 > > > > > > On Wed, Sep 13, 2017 at 5:14 PM, Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> I can't. I've destroyed that VM and clean all files. Now I am trying to >> reinstall new engine VM. >> >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> >> On Wed, Sep 13, 2017 at 5:12 PM, Donny Davis <do...@fortnebula.com> >> wrote: >> >>> Can you ping the VM when it comes up? >>> >>> On Wed, Sep 13, 2017 at 7:40 AM, Tailor, Bharat < >>> bha...@synergysystemsindia.com> wrote: >>> >>>> I am not using any DNS server. I have made entries in /etc/hosts for >>>> all Nodes and for engine VM also. >>>> >>>> Regrards >>>> Bharat Kumar >>>> >>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>> Udaipur (Raj.) >>>> 313001 >>>> Mob: +91-9950-9960-25 >>>> >>>> >>>> >>>> >>>> >>>> On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis <do...@fortnebula.com> >>>> wrote: >>>> >>>>> Bharat, >>>>> >>>>> Are you using DNS for host names or /etc/hosts >>>>> >>>>> I personally place the engines hostname with ip address in /etc/hosts >>>>> on all the hypervisors in case my DNS services go down. >>>>> I also put the hypervisors in /etc/hosts too >>>>> >>>>> Hope this helps. >>>>> >>>>> On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul <yk...@redhat.com> wrote: >>>>> >>>>>> >>>>>> >>>>>> On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat < >>>>>> bha...@synergysystemsindia.com> wrote: >>>>>> >>>>>>> Hi Charles & Donny, >>>>>>> >>>>>>> Thank you so much. >>>>>>> >>>>>>> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above >>>>>>> mail). >>>>>>> I was trying to install ovirt ova on test2.localdomain. I've cleared >>>>>>> all the steps and at last I got a message like "Engine is still >>>>>>> unreachable". Kindly help me to troubleshoot it. >>>>>>> >>>>>>> @Ykaul How can I register myself in mailing list? >>>>>>> >>>>>> >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> Y. >>>>>> >>>>>> >>>>>>> >>>>>>> Regrards >>>>>>> Bharat Kumar >>>>>>> >>>>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>>>> Udaipur (Raj.) >>>>>>> 313001 >>>>>>> Mob: +91-9950-9960-25 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Wed, Sep 13, 2017 at 3:06 AM, Charles Kozler < >>>>>>> ckozler...@gmail.com> wrote: >>>>>>> >>>>>>>> Bharat - >>>>>>>> >>>>>>>> 1. Yes. Will need to configure switch port as a trunk and setup >>>>>>>> your VLANs and VLAN ID's >>>>>>>> 2. Yes >>>>>>>>
Re: [ovirt-users] Hyper converged network setup
Hi, I've reinstall Centos7 Minimal on all three hosts. Installed Ovirt self hosted ova 4.1 on test1.localdomain. After installation completed, I got an error like engine vm is unreachable. I am able to ping engine from both IP and FQDN but unable to access it in browser. When I check engine VM status I got an error "Failed to connect to broker". I've enclosed engine-vm config snap and Error snap for more details. Kind help to resolve it. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Wed, Sep 13, 2017 at 5:14 PM, Tailor, Bharat < bha...@synergysystemsindia.com> wrote: > I can't. I've destroyed that VM and clean all files. Now I am trying to > reinstall new engine VM. > > Regrards > Bharat Kumar > > G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad > Udaipur (Raj.) > 313001 > Mob: +91-9950-9960-25 > > > > > > On Wed, Sep 13, 2017 at 5:12 PM, Donny Davis <do...@fortnebula.com> wrote: > >> Can you ping the VM when it comes up? >> >> On Wed, Sep 13, 2017 at 7:40 AM, Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> I am not using any DNS server. I have made entries in /etc/hosts for all >>> Nodes and for engine VM also. >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis <do...@fortnebula.com> >>> wrote: >>> >>>> Bharat, >>>> >>>> Are you using DNS for host names or /etc/hosts >>>> >>>> I personally place the engines hostname with ip address in /etc/hosts >>>> on all the hypervisors in case my DNS services go down. >>>> I also put the hypervisors in /etc/hosts too >>>> >>>> Hope this helps. >>>> >>>> On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul <yk...@redhat.com> wrote: >>>> >>>>> >>>>> >>>>> On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat < >>>>> bha...@synergysystemsindia.com> wrote: >>>>> >>>>>> Hi Charles & Donny, >>>>>> >>>>>> Thank you so much. >>>>>> >>>>>> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above >>>>>> mail). >>>>>> I was trying to install ovirt ova on test2.localdomain. I've cleared >>>>>> all the steps and at last I got a message like "Engine is still >>>>>> unreachable". Kindly help me to troubleshoot it. >>>>>> >>>>>> @Ykaul How can I register myself in mailing list? >>>>>> >>>>> >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> Y. >>>>> >>>>> >>>>>> >>>>>> Regrards >>>>>> Bharat Kumar >>>>>> >>>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>>> Udaipur (Raj.) >>>>>> 313001 >>>>>> Mob: +91-9950-9960-25 >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Wed, Sep 13, 2017 at 3:06 AM, Charles Kozler <ckozler...@gmail.com >>>>>> > wrote: >>>>>> >>>>>>> Bharat - >>>>>>> >>>>>>> 1. Yes. Will need to configure switch port as a trunk and setup your >>>>>>> VLANs and VLAN ID's >>>>>>> 2. Yes >>>>>>> 3. You can still access the hosts. The engine itself crashing or >>>>>>> being down wont stop your VMs or hosts or anything (unless fencing). You >>>>>>> can use virsh >>>>>>> 4. My suggestion here is start immediately after a fresh server >>>>>>> install and yum update. Installer does a lot and checks a lot and wont >>>>>>> like >>>>>>> things: ex - you setup ovirtmgmt bridged network yourself >>>>>>> 5. Yes. See #1, usually what I do is each ovirt node I have I set an >>>>>>> IP of .5, then .6, and so on. This way I can be sure my network itself >>>>>>> is >>>>>>> working before
Re: [ovirt-users] Hyper converged network setup
I can't. I've destroyed that VM and clean all files. Now I am trying to reinstall new engine VM. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Wed, Sep 13, 2017 at 5:12 PM, Donny Davis <do...@fortnebula.com> wrote: > Can you ping the VM when it comes up? > > On Wed, Sep 13, 2017 at 7:40 AM, Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> I am not using any DNS server. I have made entries in /etc/hosts for all >> Nodes and for engine VM also. >> >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> >> On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis <do...@fortnebula.com> >> wrote: >> >>> Bharat, >>> >>> Are you using DNS for host names or /etc/hosts >>> >>> I personally place the engines hostname with ip address in /etc/hosts on >>> all the hypervisors in case my DNS services go down. >>> I also put the hypervisors in /etc/hosts too >>> >>> Hope this helps. >>> >>> On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul <yk...@redhat.com> wrote: >>> >>>> >>>> >>>> On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat < >>>> bha...@synergysystemsindia.com> wrote: >>>> >>>>> Hi Charles & Donny, >>>>> >>>>> Thank you so much. >>>>> >>>>> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above >>>>> mail). >>>>> I was trying to install ovirt ova on test2.localdomain. I've cleared >>>>> all the steps and at last I got a message like "Engine is still >>>>> unreachable". Kindly help me to troubleshoot it. >>>>> >>>>> @Ykaul How can I register myself in mailing list? >>>>> >>>> >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> Y. >>>> >>>> >>>>> >>>>> Regrards >>>>> Bharat Kumar >>>>> >>>>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>>>> Udaipur (Raj.) >>>>> 313001 >>>>> Mob: +91-9950-9960-25 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, Sep 13, 2017 at 3:06 AM, Charles Kozler <ckozler...@gmail.com> >>>>> wrote: >>>>> >>>>>> Bharat - >>>>>> >>>>>> 1. Yes. Will need to configure switch port as a trunk and setup your >>>>>> VLANs and VLAN ID's >>>>>> 2. Yes >>>>>> 3. You can still access the hosts. The engine itself crashing or >>>>>> being down wont stop your VMs or hosts or anything (unless fencing). You >>>>>> can use virsh >>>>>> 4. My suggestion here is start immediately after a fresh server >>>>>> install and yum update. Installer does a lot and checks a lot and wont >>>>>> like >>>>>> things: ex - you setup ovirtmgmt bridged network yourself >>>>>> 5. Yes. See #1, usually what I do is each ovirt node I have I set an >>>>>> IP of .5, then .6, and so on. This way I can be sure my network itself is >>>>>> working before adding a VM and attaching that NIC to it >>>>>> >>>>>> On Tue, Sep 12, 2017 at 4:41 PM, Donny Davis <do...@fortnebula.com> >>>>>> wrote: >>>>>> >>>>>>> 1. Yes, you can do this >>>>>>> 2. Yes, In linux it's called bonding and this can be done from the UI >>>>>>> 3. You can get around using the Engine machine if required with >>>>>>> virsh or virt-manager - however I would just wait for the manager to >>>>>>> migrate and start on another host in the cluster >>>>>>> 4. The deployment will take care of everything for you. You just >>>>>>> need an IP >>>>>>> 5. Yes, you can use vlans or virtual networking(NSXish) called OVS >>>>>>> in oVirt. >>>>>>> >>>>>>> I noticed on your deployment machines 2 and 3 have the same IP. >>>>>>> Might want to fix that before deployin
Re: [ovirt-users] Hyper converged network setup
I am not using any DNS server. I have made entries in /etc/hosts for all Nodes and for engine VM also. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Wed, Sep 13, 2017 at 5:02 PM, Donny Davis <do...@fortnebula.com> wrote: > Bharat, > > Are you using DNS for host names or /etc/hosts > > I personally place the engines hostname with ip address in /etc/hosts on > all the hypervisors in case my DNS services go down. > I also put the hypervisors in /etc/hosts too > > Hope this helps. > > On Wed, Sep 13, 2017 at 6:04 AM, Yaniv Kaul <yk...@redhat.com> wrote: > >> >> >> On Wed, Sep 13, 2017 at 8:42 AM, Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> Hi Charles & Donny, >>> >>> Thank you so much. >>> >>> @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above mail). >>> I was trying to install ovirt ova on test2.localdomain. I've cleared all >>> the steps and at last I got a message like "Engine is still unreachable". >>> Kindly help me to troubleshoot it. >>> >>> @Ykaul How can I register myself in mailing list? >>> >> >> http://lists.ovirt.org/mailman/listinfo/users >> >> Y. >> >> >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> On Wed, Sep 13, 2017 at 3:06 AM, Charles Kozler <ckozler...@gmail.com> >>> wrote: >>> >>>> Bharat - >>>> >>>> 1. Yes. Will need to configure switch port as a trunk and setup your >>>> VLANs and VLAN ID's >>>> 2. Yes >>>> 3. You can still access the hosts. The engine itself crashing or being >>>> down wont stop your VMs or hosts or anything (unless fencing). You can use >>>> virsh >>>> 4. My suggestion here is start immediately after a fresh server install >>>> and yum update. Installer does a lot and checks a lot and wont like things: >>>> ex - you setup ovirtmgmt bridged network yourself >>>> 5. Yes. See #1, usually what I do is each ovirt node I have I set an IP >>>> of .5, then .6, and so on. This way I can be sure my network itself is >>>> working before adding a VM and attaching that NIC to it >>>> >>>> On Tue, Sep 12, 2017 at 4:41 PM, Donny Davis <do...@fortnebula.com> >>>> wrote: >>>> >>>>> 1. Yes, you can do this >>>>> 2. Yes, In linux it's called bonding and this can be done from the UI >>>>> 3. You can get around using the Engine machine if required with virsh >>>>> or virt-manager - however I would just wait for the manager to migrate and >>>>> start on another host in the cluster >>>>> 4. The deployment will take care of everything for you. You just need >>>>> an IP >>>>> 5. Yes, you can use vlans or virtual networking(NSXish) called OVS in >>>>> oVirt. >>>>> >>>>> I noticed on your deployment machines 2 and 3 have the same IP. Might >>>>> want to fix that before deploying >>>>> >>>>> Happy trails >>>>> ~D >>>>> >>>>> >>>>> On Tue, Sep 12, 2017 at 2:00 PM, Tailor, Bharat < >>>>> bha...@synergysystemsindia.com> wrote: >>>>> >>>>>> Hi Charles, >>>>>> >>>>>> Thank you so much to share a cool stuff with us. >>>>>> >>>>>> My doubts are still not cleared. >>>>>> >>>>>> >>>>>>1. What If I have only single Physical network adaptor? Can't I >>>>>>use it for management network & production network both. >>>>>>2. If I have two Physical network adaptor, Can I configure NIC >>>>>>teaming as like Vmware ESXi. >>>>>>3. What If my ovirt machine fails during production period? In >>>>>>vmware we can access ESXi hosts and VM without Vcenter and do all the >>>>>>stuffs. Can we do the same with Ovirt & KVM. >>>>>>4. To deploy ovirt engine VM, what kind of configuration I'll >>>>>>have to do on network adaptors? (eg. just configure IP on physical >
Re: [ovirt-users] Hyper converged network setup
Hi Charles & Donny, Thank you so much. @Donny my 3rd node's IP is 192.168.100.17(Mentioned wrong in above mail). I was trying to install ovirt ova on test2.localdomain. I've cleared all the steps and at last I got a message like "Engine is still unreachable". Kindly help me to troubleshoot it. @Ykaul How can I register myself in mailing list? Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Wed, Sep 13, 2017 at 3:06 AM, Charles Kozler <ckozler...@gmail.com> wrote: > Bharat - > > 1. Yes. Will need to configure switch port as a trunk and setup your VLANs > and VLAN ID's > 2. Yes > 3. You can still access the hosts. The engine itself crashing or being > down wont stop your VMs or hosts or anything (unless fencing). You can use > virsh > 4. My suggestion here is start immediately after a fresh server install > and yum update. Installer does a lot and checks a lot and wont like things: > ex - you setup ovirtmgmt bridged network yourself > 5. Yes. See #1, usually what I do is each ovirt node I have I set an IP of > .5, then .6, and so on. This way I can be sure my network itself is working > before adding a VM and attaching that NIC to it > > On Tue, Sep 12, 2017 at 4:41 PM, Donny Davis <do...@fortnebula.com> wrote: > >> 1. Yes, you can do this >> 2. Yes, In linux it's called bonding and this can be done from the UI >> 3. You can get around using the Engine machine if required with virsh or >> virt-manager - however I would just wait for the manager to migrate and >> start on another host in the cluster >> 4. The deployment will take care of everything for you. You just need an >> IP >> 5. Yes, you can use vlans or virtual networking(NSXish) called OVS in >> oVirt. >> >> I noticed on your deployment machines 2 and 3 have the same IP. Might >> want to fix that before deploying >> >> Happy trails >> ~D >> >> >> On Tue, Sep 12, 2017 at 2:00 PM, Tailor, Bharat < >> bha...@synergysystemsindia.com> wrote: >> >>> Hi Charles, >>> >>> Thank you so much to share a cool stuff with us. >>> >>> My doubts are still not cleared. >>> >>> >>>1. What If I have only single Physical network adaptor? Can't I use >>>it for management network & production network both. >>>2. If I have two Physical network adaptor, Can I configure NIC >>>teaming as like Vmware ESXi. >>>3. What If my ovirt machine fails during production period? In >>>vmware we can access ESXi hosts and VM without Vcenter and do all the >>>stuffs. Can we do the same with Ovirt & KVM. >>>4. To deploy ovirt engine VM, what kind of configuration I'll have >>>to do on network adaptors? (eg. just configure IP on physical network or >>>have to create br0 for it.) >>>5. Can I make multiple VM networks for vlan configuration? >>> >>> >>> Regrards >>> Bharat Kumar >>> >>> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >>> Udaipur (Raj.) >>> 313001 >>> Mob: +91-9950-9960-25 >>> >>> >>> >>> >>> >>> On Tue, Sep 12, 2017 at 9:30 PM, Charles Kozler <ckozler...@gmail.com> >>> wrote: >>> >>>> >>>> Interestingly enough I literally just went through this same thing with >>>> a slight variation. >>>> >>>> Note to the below: I am not sure if this would be considerd best >>>> practice or good for something long term support but I made due with what I >>>> had >>>> >>>> I had 10Gb cards for my storage network but no 10Gb switch, so I direct >>>> connected them with some fun routing and /etc/hosts settings. I also didnt >>>> want my storage network on a routed network (have firewalls in the way of >>>> VLANs) and I wanted the network separate from my ovirtmgmt - and, as I >>>> said, had no switches for 10Gb. Here is what you need at a bare minimum. >>>> Adapt / change it as you need >>>> >>>> 1 dedicated NIC on each node for ovirtmgmt. Ex: eth0 >>>> >>>> 1 dedicated NIC to direct connect node 1 and node 2 - eth1 node1 >>>> 1 dedicated NIC to direct connect node 1 and node 3 - eth2 node1 >>>> >>>> 1 dedicated NIC to direct connect node 2 and node 1 - eth1 node2 >>>> 1 dedicated NIC to direct connect node 2 and node 3 - eth2 node2 >>>> >>>> 1 dedicated NIC to direct
Re: [ovirt-users] Hyper converged network setup
Hi Charles, Thank you so much to share a cool stuff with us. My doubts are still not cleared. 1. What If I have only single Physical network adaptor? Can't I use it for management network & production network both. 2. If I have two Physical network adaptor, Can I configure NIC teaming as like Vmware ESXi. 3. What If my ovirt machine fails during production period? In vmware we can access ESXi hosts and VM without Vcenter and do all the stuffs. Can we do the same with Ovirt & KVM. 4. To deploy ovirt engine VM, what kind of configuration I'll have to do on network adaptors? (eg. just configure IP on physical network or have to create br0 for it.) 5. Can I make multiple VM networks for vlan configuration? Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 On Tue, Sep 12, 2017 at 9:30 PM, Charles Kozler <ckozler...@gmail.com> wrote: > > Interestingly enough I literally just went through this same thing with a > slight variation. > > Note to the below: I am not sure if this would be considerd best practice > or good for something long term support but I made due with what I had > > I had 10Gb cards for my storage network but no 10Gb switch, so I direct > connected them with some fun routing and /etc/hosts settings. I also didnt > want my storage network on a routed network (have firewalls in the way of > VLANs) and I wanted the network separate from my ovirtmgmt - and, as I > said, had no switches for 10Gb. Here is what you need at a bare minimum. > Adapt / change it as you need > > 1 dedicated NIC on each node for ovirtmgmt. Ex: eth0 > > 1 dedicated NIC to direct connect node 1 and node 2 - eth1 node1 > 1 dedicated NIC to direct connect node 1 and node 3 - eth2 node1 > > 1 dedicated NIC to direct connect node 2 and node 1 - eth1 node2 > 1 dedicated NIC to direct connect node 2 and node 3 - eth2 node2 > > 1 dedicated NIC to direct connect node 3 and node 1 - eth1 node3 > 1 dedicated NIC to direct connect node 3 and node 2 - eth2 node3 > > You'll need custom routes too: > > Route to node 3 from node 1 via eth2 > Route to node 3 from node 2 via eth2 > Route to node 2 from node 3 via eth2 > > Finally, entries in your /etc/hosts which match to your routes above > > Then, advisably, a dedicated NIC per box for VM network but you can > leverage ovirtmgmt if you are just proofing this out > > At this point if you can reach all of your nodes via this direct connect > IPs then you setup gluster as you normally would referencing your entries > in /etc/hosts when you call "gluster volume create" > > In my setup, as I said, I had 2x 2 port PCIe 10Gb cards per server so I > setup LACP as well as you can see below > > This is what my Frankenstein POC looked like: http://i.imgur.com/ > iURL9jv.png > > You can optionally choose to setup this network in ovirt as well (and add > the NICs to each host) but dont configure it as a VM network. Then you can > also, with some other minor tweaks, use these direct connects as migration > networks rather than ovirtmgmt or VM network > > On Tue, Sep 12, 2017 at 9:12 AM, Tailor, Bharat < > bha...@synergysystemsindia.com> wrote: > >> Hi, >> >> I am trying to deploy 3 hosts hyper converged setup. >> I am using Centos and installed KVM on all hosts. >> >> Host-1 >> Hostname - test1.localdomain >> eth0 - 192.168.100.15/24 >> GW - 192.168.100.1 >> >> Hoat-2 >> Hostname - test2.localdomain >> eth0 - 192.168.100.16/24 >> GW - 192.168.100.1 >> >> Host-3 >> Hostname - test3.localdomain >> eth0 - 192.168.100.16/24 >> GW - 192.168.100.1 >> >> I have created two gluster volume "engine" & "data" with replica 3. >> I have add fqdn entry in /etc/hosts for all host for DNS resolution. >> >> I want to deploy Ovirt engine self hosted OVA to manage all the hosts and >> production VM and my ovirt-engine VM should have HA enabled. >> >> I found multiple docs over internet to deply Self-hosted-engine-ova but I >> don't what kind of network configuration I've to do on Centos network card >> & KVM. As KVM docs suggest that I've to create a bridge network for Pnic to >> Vnic bridge. If I configure a bridge br0 for eth0 bridge that I can't see >> eth0 while deploying ovirt-engine setup at NIC card choice. >> >> Kindly help me to do correct configuration for Centos hosts, KVM & >> ovirt-engine-vm for HA enabled DC. >> Regrards >> Bharat Kumar >> >> G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad >> Udaipur (Raj.) >> 313001 >> Mob: +91-9950-9960-25 >> >> >> >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Hyper converged network setup
Hi, I am trying to deploy 3 hosts hyper converged setup. I am using Centos and installed KVM on all hosts. Host-1 Hostname - test1.localdomain eth0 - 192.168.100.15/24 GW - 192.168.100.1 Hoat-2 Hostname - test2.localdomain eth0 - 192.168.100.16/24 GW - 192.168.100.1 Host-3 Hostname - test3.localdomain eth0 - 192.168.100.16/24 GW - 192.168.100.1 I have created two gluster volume "engine" & "data" with replica 3. I have add fqdn entry in /etc/hosts for all host for DNS resolution. I want to deploy Ovirt engine self hosted OVA to manage all the hosts and production VM and my ovirt-engine VM should have HA enabled. I found multiple docs over internet to deply Self-hosted-engine-ova but I don't what kind of network configuration I've to do on Centos network card & KVM. As KVM docs suggest that I've to create a bridge network for Pnic to Vnic bridge. If I configure a bridge br0 for eth0 bridge that I can't see eth0 while deploying ovirt-engine setup at NIC card choice. Kindly help me to do correct configuration for Centos hosts, KVM & ovirt-engine-vm for HA enabled DC. Regrards Bharat Kumar G15- Vinayak Nagar complex,Opp.Maa Satiya, ayad Udaipur (Raj.) 313001 Mob: +91-9950-9960-25 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
