[ovirt-users] Windows VirtIO drivers
Dear Team, How can we install virtIO windows drivers to Windows 2016. As of now I tried to attach floppy drive with virtio-win.vfd image but while installing drivers didn’t get loaded. Please guide or let me know the proper way to install drivers. Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XBYY54K62BYJGVDLJOQNEMKT6GIAZE7/
[ovirt-users] Re: Windows VirtIO drivers
Hi Gal, I have downloaded the virtio-win_x86.vfd and uploaded to ISO domain. Used Run Once and attached the floppy drive, while looking for drivers in A drive it gives below error: I followed all the steps as per the guidelines shared in the document. Don’t know what I am missing. Thanks Vijay Sachdeva From: Gal Zaidman Date: Tuesday, 3 December 2019 at 6:44 PM To: Vijay Sachdeva , Subject: Re: [ovirt-users] Windows VirtIO drivers Going back to the user list, just in case it will be relevant to others On Tue, Dec 3, 2019 at 3:02 PM Vijay Sachdeva wrote: Hi Gal, Thank you so much for replying, can you please a steps to do that. Right now what I am doing is: Installed Windows 2016 using IDE interface, but performance is very bad and it’ really hard to install any further .exe into it. I never used the IDE interface so I can't say from personal experience, but I don't think that should be the behavior, please open a bug on that so that we can examin. Other option I see attaching the floppy drive when we use “Run Once”, but problem is when pointing to floppy drive while loading drivers. It says no drivers detected. Using Run Once is the preferred option, see https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-installing_windows_virtual_machines Make sure that you attach the latest virtio-win vdf (the link I sent earlier should be ok) and select the relevant drivers, if there is a problem then please open a bug on virtio-win project and send me the url so I will track it, thanks. Please share let me know the best way to perform this action as need to deliver the Ovirt infra to one of my customer and really stuck on this driver installation. Appreciate your quick response.!! Vijay Sachdeva From: Gal Zaidman Date: Tuesday, 3 December 2019 at 6:22 PM To: Vijay Sachdeva Subject: Re: [ovirt-users] Windows VirtIO drivers HI Vijay, There a package on fedora: virtio-win-0.1.173-2 which contains an MSI installer for the drivers and the ovirt agent (which is disabled on a normal installation, so please enable it when you install). This installer should replace the ovirt-wgt that we have currently on the next versions, and it is new, so please give us feedback once you used it. P.S the installer installs the drivers normally so if the regular drivers from virtio-win fail to install, then using the installer will not change much probably, and it means that you have a deeper problem. In case the installation fails then please generate logs but running the installer through cmd.exe "msiexec /i {installer} /l*v {path to log}" (https://www.advancedinstaller.com/user-guide/qa-log.html) and open a bug/reply here and I will try and help Thanks On Tue, Dec 3, 2019 at 2:11 PM Vijay Sachdeva wrote: Dear Team, How can we install virtIO windows drivers to Windows 2016. As of now I tried to attach floppy drive with virtio-win.vfd image but while installing drivers didn’t get loaded. Please guide or let me know the proper way to install drivers. Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XBYY54K62BYJGVDLJOQNEMKT6GIAZE7/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2K4WHKA6I4BVNHYM24INGVBEH63R5OOU/
[ovirt-users] Re: Windows VirtIO drivers
Anyone, please let me know. Really stuck at this point. I am using Ovirt Manager 4.3 and while installing Windows VMs If I used disk type as IDE, I can see the disks to install the OS but if I use virtIO-scsi for disks the disk is not seen. So I attached floppy disk to VM, but it says no drivers detected. Can anyone let me know the best way to install Windows 2016? Thanks Vijay Sachdeva From: Vijay Sachdeva Date: Tuesday, 3 December 2019 at 6:56 PM To: Gal Zaidman , Subject: Re: [ovirt-users] Windows VirtIO drivers Hi Gal, I have downloaded the virtio-win_x86.vfd and uploaded to ISO domain. Used Run Once and attached the floppy drive, while looking for drivers in A drive it gives below error: I followed all the steps as per the guidelines shared in the document. Don’t know what I am missing. Thanks Vijay Sachdeva From: Gal Zaidman Date: Tuesday, 3 December 2019 at 6:44 PM To: Vijay Sachdeva , Subject: Re: [ovirt-users] Windows VirtIO drivers Going back to the user list, just in case it will be relevant to others On Tue, Dec 3, 2019 at 3:02 PM Vijay Sachdeva wrote: Hi Gal, Thank you so much for replying, can you please a steps to do that. Right now what I am doing is: Installed Windows 2016 using IDE interface, but performance is very bad and it’ really hard to install any further .exe into it. I never used the IDE interface so I can't say from personal experience, but I don't think that should be the behavior, please open a bug on that so that we can examin. Other option I see attaching the floppy drive when we use “Run Once”, but problem is when pointing to floppy drive while loading drivers. It says no drivers detected. Using Run Once is the preferred option, see https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/virtual_machine_management_guide/chap-installing_windows_virtual_machines Make sure that you attach the latest virtio-win vdf (the link I sent earlier should be ok) and select the relevant drivers, if there is a problem then please open a bug on virtio-win project and send me the url so I will track it, thanks. Please share let me know the best way to perform this action as need to deliver the Ovirt infra to one of my customer and really stuck on this driver installation. Appreciate your quick response.!! Vijay Sachdeva From: Gal Zaidman Date: Tuesday, 3 December 2019 at 6:22 PM To: Vijay Sachdeva Subject: Re: [ovirt-users] Windows VirtIO drivers HI Vijay, There a package on fedora: virtio-win-0.1.173-2 which contains an MSI installer for the drivers and the ovirt agent (which is disabled on a normal installation, so please enable it when you install). This installer should replace the ovirt-wgt that we have currently on the next versions, and it is new, so please give us feedback once you used it. P.S the installer installs the drivers normally so if the regular drivers from virtio-win fail to install, then using the installer will not change much probably, and it means that you have a deeper problem. In case the installation fails then please generate logs but running the installer through cmd.exe "msiexec /i {installer} /l*v {path to log}" (https://www.advancedinstaller.com/user-guide/qa-log.html) and open a bug/reply here and I will try and help Thanks On Tue, Dec 3, 2019 at 2:11 PM Vijay Sachdeva wrote: Dear Team, How can we install virtIO windows drivers to Windows 2016. As of now I tried to attach floppy drive with virtio-win.vfd image but while installing drivers didn’t get loaded. Please guide or let me know the proper way to install drivers. Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XBYY54K62BYJGVDLJOQNEMKT6GIAZE7/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RJW72SVIRUNR2E52AAUPXBOFHQ3BK26P/
[ovirt-users] Windows Sluggish Performance
Hello Everyone, I managed to install Windows Server 2016 server on Ovirt node using ovirt engine.All virtio-Win drivers also installed, but the performance of Windows using console is very sluggish and mouse pointer is not at all responsive. Can anyone let me know, what could be the reason. Not able to to even add IP to VM as mouse doesn’t work at all. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DAMR2OMZHNNU44P5PNOXCADBTD3EUA4S/
[ovirt-users] Re: Windows Sluggish Performance
Anyone? On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva wrote: > Hello Everyone, > > I managed to install Windows Server 2016 server on Ovirt node using ovirt > engine.All virtio-Win drivers also installed, but the performance of > Windows using console is very sluggish and mouse pointer is not at all > responsive. > > Can anyone let me know, what could be the reason. Not able to to even add > IP to VM as mouse doesn’t work at all. > > Thanks > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GG2L2K3QDGURBZ37HPQAEF64BSUTTWCN/
[ovirt-users] Re: Windows Sluggish Performance
Yes, I did that. But Windows console bit slow not as expected. Thanks Vijay Sachdeva From: Michal Skrivanek Date: Thursday, 5 December 2019 at 11:58 PM To: Vijay Sachdeva Cc: Strahil , users Subject: Re: [ovirt-users] Re: Windows Sluggish Performance On 4 Dec 2019, at 04:16, Vijay Sachdeva wrote: Hey, The problem what I have found is when I am using SPICE as default console option, the console performance is very sluggish. So what I understand here is one needs to install additional spice guest tools to improve the performance as it includes QLX video driver. Yes. So did you do that? https://www.spice-space.org/download.html The moment I switched to VNC console options, performance improved but not far better as it should be when taking a console of machine. So still any suggestions to improve console access? Thanks Vijay Sachdeva From: Strahil Date: Wednesday, 4 December 2019 at 5:12 AM To: users , Vijay Subject: Re: [ovirt-users] Re: Windows Sluggish Performance What is your virtual GPU ? I'm using QLX, and despite being sluggish, when you tune windows for best performance -it is workable. Of course, if you passthrough a GPU, performance will be completely different. Best Regards, Strahil Nikolov On Dec 3, 2019 21:19, Vijay Sachdeva wrote: Anyone? On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva wrote: Hello Everyone, I managed to install Windows Server 2016 server on Ovirt node using ovirt engine.All virtio-Win drivers also installed, but the performance of Windows using console is very sluggish and mouse pointer is not at all responsive. Can anyone let me know, what could be the reason. Not able to to even add IP to VM as mouse doesn’t work at all. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SCW3GKSIVIHL6O32FQQW4CGYXJZMYB4T/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AKST7TMWXPIG7XHZ3NUNZIRU27W3VDM3/
[ovirt-users] Hyper-V to KVM | v2v
Hello, I am trying to convert a Hyper-V guest VM to run on KVM using virt-v2v utility. Getting below error: Any suggestions how to solve this. Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SUPMVKHQJJVXZLEN7DRJDD2VAAHCKRI3/
[ovirt-users] Re: Hyper-V to KVM | v2v
Anyone ? On Sun, 8 Dec 2019 at 2:00 AM, Vijay Sachdeva wrote: > What step I did was: > > > >1. Used qemu-img to convert the vhdx to raw img >2. Created a blank disk and copied my converted disk to same location. >3. Renamed the converted drive with the name of blank disk. >4. Created a VM and attached my converted disk to VM. > > > > Error: No bootable disk found > > > > > > But when I attack this disk to another running VM, there I can see the > data. But noting booting as bootable. > > > > Vijay Sachdeva > > > > > > > > *From: *Vijay Sachdeva > > > *Date: *Sunday, 8 December 2019 at 1:48 AM > *To: *Strahil , users > *Subject: *Re: [ovirt-users] Hyper-V to KVM | v2v > > > > One question, once disk is converted to KVM format. > > > > What is the way to use that drive and run a VM from it within Ovirt > environment. > > > > Vijay Sachdeva > > > > > > *From: *Strahil > *Date: *Friday, 6 December 2019 at 8:57 PM > *To: *users , Vijay > *Subject: *Re: [ovirt-users] Hyper-V to KVM | v2v > > > > Have you tried to power up and fully shutdown the VM ? > > Best Regards, > Strahil Nikolov > > On Dec 6, 2019 15:52, Vijay Sachdeva wrote: > > Hello, > > > > I am trying to convert a Hyper-V guest VM to run on KVM using virt-v2v > utility. > > > > Getting below error: > > > > [image: cid:image001.png@01D5AC6A.8B510030] > > > > Any suggestions how to solve this. > > > > Thanks > > > > Vijay Sachdeva > > > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NM5NZG5M3WUSM7U2EMGP5FL5BQBQ3CBA/
[ovirt-users] Re: Hyper-V to KVM | v2v
Hi. Although if I add this converted disk as second disk..I could see the data there. But not booting as single disk..as windows 2016 OS data is kept and have to deliver to one of my client. Bit of stuck here. Thanks On Sun, 8 Dec 2019 at 11:46 AM, Mathieu Simon wrote: > Hi Vijay > > Based on your initial post about using virt-v2v I don't know how > intelligent virt-v2v is in knowing and converting the VM machine type. > > However the boot issue could be related to Hyper-V defaulting to "Gen 2" > VMs which are all UEFI based. Hence your current VMs > should have a FAT32 partition with an EFI loader. oVirt by default > emulates 440FX Chipset and a legacy SeaBIOS. > Only so-called Gen 1 VMs were emulating a legacy BIOS on the Hyper-V side. > > You should be able to check VM generation on Hyper-V using this PowerShell > command: > Get-VM | Format-List Name,Generation > > If it is a Gen 2 VM, starting with oVirt 4.3 you could try booting a > converted disk on a VM with Q35 and OVMF (UEFI). > Keep in mind that 4.3 still has some rough edges in that area. For example > all settings written to the UEFI NVRAM get lost when turning off > and on the VM in oVirt. This affects the bootloader entries in OVMF that > an OS installer eventually created during setup. > Thus the OVMF only ever looks for an EFI loader bootloader in the path > boot/efi/bootx64.efi in that FAT32 partition. > > However if that path is not present, OVMF should open the "BIOS settings" > and you should be able to "boot from file" and then > select the .efi file if the given operating system and make an attempt at > booting the guest OS. > > The current workaround that seems to work now is to copy the OS's .efi > loader to the default location OVMF is looking for a bootloader > as described here: https://bugzilla.redhat.com/show_bug.cgi?id=1727987 > > Regards, > Mathieu > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ESOPHINAYC3FYKYL7OV7WBOBINALI7IJ/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3EXBIL6OMYCO2CIDMO6QAX4E6TL4TSC3/
[ovirt-users] Re: Hyper-V to KVM | v2v
One question, once disk is converted to KVM format. What is the way to use that drive and run a VM from it within Ovirt environment. Vijay Sachdeva From: Strahil Date: Friday, 6 December 2019 at 8:57 PM To: users , Vijay Subject: Re: [ovirt-users] Hyper-V to KVM | v2v Have you tried to power up and fully shutdown the VM ? Best Regards, Strahil Nikolov On Dec 6, 2019 15:52, Vijay Sachdeva wrote: Hello, I am trying to convert a Hyper-V guest VM to run on KVM using virt-v2v utility. Getting below error: Any suggestions how to solve this. Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/F4QLEI7I3KIE2FOZKSMRFJKQKFZHJMHX/
[ovirt-users] Re: Hyper-V to KVM | v2v
What step I did was: Used qemu-img to convert the vhdx to raw img Created a blank disk and copied my converted disk to same location. Renamed the converted drive with the name of blank disk. Created a VM and attached my converted disk to VM. Error: No bootable disk found But when I attack this disk to another running VM, there I can see the data. But noting booting as bootable. Vijay Sachdeva From: Vijay Sachdeva Date: Sunday, 8 December 2019 at 1:48 AM To: Strahil , users Subject: Re: [ovirt-users] Hyper-V to KVM | v2v One question, once disk is converted to KVM format. What is the way to use that drive and run a VM from it within Ovirt environment. Vijay Sachdeva From: Strahil Date: Friday, 6 December 2019 at 8:57 PM To: users , Vijay Subject: Re: [ovirt-users] Hyper-V to KVM | v2v Have you tried to power up and fully shutdown the VM ? Best Regards, Strahil Nikolov On Dec 6, 2019 15:52, Vijay Sachdeva wrote: Hello, I am trying to convert a Hyper-V guest VM to run on KVM using virt-v2v utility. Getting below error: Any suggestions how to solve this. Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IDLFUMYKB6DYD3PBMTPKBSWV3KILYZG5/
[ovirt-users] Overt Networking VM not pinging
Dear Community, I have installed Ovirt Engine 4.3 and Ovirt Node 4.3. Node got successfully added to engine and setup host network also done. When trying to ping host using “ovirtmgmt” as vNic profile for a VM, it is not even able to ping it’s host or any other machine on that same network. Also added a VLAN network which is passed via same uplink of Node interface where “Ovirtmgmt” is passed, that is also not working. Although this vnet is vnic type is VirtIO and state shows “UNKNOWN”, would this be a problem? Any help would be highly appreciated. Thanks Vijay Sachdeva Senior Manager – Service Delivery IndiQus Technologies O +91 11 4055 1411 | M +91 8826699409 www.indiqus.com ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/U5TSYZSKND2BXIWNSEOG4WVVXZSROZBG/
[ovirt-users] Overt Networking VM not pinging
Dear Community, I have installed Ovirt Engine 4.3 and Ovirt Node 4.3. Node got successfully added to engine and setup host network also done. When trying to ping host using “ovirtmgmt” as vNic profile for a VM, it is not even able to ping it’s host or any other machine on that same network. Also added a VLAN network which is passed via same uplink of Node interface where “Ovirtmgmt” is passed, that is also not working. Although this vnet is vnic type is VirtIO and state shows “UNKNOWN”, would this be a problem? Any help would be highly appreciated. Thanks Vijay Sachdeva Senior Manager – Service Delivery *IndiQus Technologies * ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RYAA2NJSCCSU2AD7SGEDTMBOPND25B3T/
[ovirt-users] Re: Overt Networking VM not pinging
Hi Team, Anyone having any Solution for this, please revert. Thanks On Sun, 1 Dec 2019 at 12:29 AM, Vijay Sachdeva wrote: > Dear Community, > > > > I have installed Ovirt Engine 4.3 and Ovirt Node 4.3. Node got > successfully added to engine and setup host network also done. When trying > to ping host using “ovirtmgmt” as vNic profile for a VM, it is not even > able to ping it’s host or any other machine on that same network. Also > added a VLAN network which is passed via same uplink of Node interface > where “Ovirtmgmt” is passed, that is also not working. > > > > > > Although this vnet is vnic type is VirtIO and state shows “UNKNOWN”, would > this be a problem? > > > > Any help would be highly appreciated. > > > > Thanks > > > > Vijay Sachdeva > > Senior Manager – Service Delivery > > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WHBSXZASHUMFDTQMZC4AHX62BCWY5SD5/
[ovirt-users] Re: Overt Networking VM not pinging
Thanks for replying, I have single host with 4 interfaces. Two of the interfaces are bonded and connected to bridge “ovirtmgmt” and other bridge(VLAN based). None of the networks works neither “ovirtmgmt” untagged, and YES I checked they are not out of sync. Although Ovirt-engine, using VDSM setup that but no luck. Any suggestion, would be a great help..!! Thanks Vijay Sachdeva From: Strahil Nikolov Date: Monday, 2 December 2019 at 1:27 AM To: , Vijay Sachdeva Subject: Re: [ovirt-users] Re: Overt Networking VM not pinging Have you checked in each host's -> Network Interfaces -> NIC if ovirtmgmt is out of sync ? Best Regards, Strahil Nikolov В неделя, 1 декември 2019 г., 20:29:06 ч. Гринуич+2, Vijay Sachdeva написа: Hi Team, Anyone having any Solution for this, please revert. Thanks On Sun, 1 Dec 2019 at 12:29 AM, Vijay Sachdeva wrote: Dear Community, I have installed Ovirt Engine 4.3 and Ovirt Node 4.3. Node got successfully added to engine and setup host network also done. When trying to ping host using “ovirtmgmt” as vNic profile for a VM, it is not even able to ping it’s host or any other machine on that same network. Also added a VLAN network which is passed via same uplink of Node interface where “Ovirtmgmt” is passed, that is also not working. Although this vnet is vnic type is VirtIO and state shows “UNKNOWN”, would this be a problem? Any help would be highly appreciated. Thanks Vijay Sachdeva Senior Manager – Service Delivery ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WHBSXZASHUMFDTQMZC4AHX62BCWY5SD5/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KOAQFQ32DL2RXSZTWYF3YDEDZBPETKXC/
[ovirt-users] Re: Windows Sluggish Performance
Hey, The problem what I have found is when I am using SPICE as default console option, the console performance is very sluggish. So what I understand here is one needs to install additional spice guest tools to improve the performance as it includes QLX video driver. https://www.spice-space.org/download.html The moment I switched to VNC console options, performance improved but not far better as it should be when taking a console of machine. So still any suggestions to improve console access? Thanks Vijay Sachdeva From: Strahil Date: Wednesday, 4 December 2019 at 5:12 AM To: users , Vijay Subject: Re: [ovirt-users] Re: Windows Sluggish Performance What is your virtual GPU ? I'm using QLX, and despite being sluggish, when you tune windows for best performance -it is workable. Of course, if you passthrough a GPU, performance will be completely different. Best Regards, Strahil Nikolov On Dec 3, 2019 21:19, Vijay Sachdeva wrote: Anyone? On Tue, 3 Dec 2019 at 11:21 PM, Vijay Sachdeva wrote: Hello Everyone, I managed to install Windows Server 2016 server on Ovirt node using ovirt engine.All virtio-Win drivers also installed, but the performance of Windows using console is very sluggish and mouse pointer is not at all responsive. Can anyone let me know, what could be the reason. Not able to to even add IP to VM as mouse doesn’t work at all. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/SCW3GKSIVIHL6O32FQQW4CGYXJZMYB4T/
[ovirt-users] Overt-Engine Down | Host Unresponsive
Dear Team, I have one question, if Ovirt-engine goes down for some reason. Will it impact my host to go un-responsive and all VMs down? I just faced a situation where my host was in un-responsive status and all VMs were down. I restart the ovirt-engine service and host got activated. Can anyone let me know this situation? Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJ2RIVD5MU4ARAUX3FK75QLPKSBZKQH6/
[ovirt-users] VM Import Fails
Hi All, I am trying to import a VM from export domain, but import fails. Setup: Source DC has a NFS shared storage with two Hosts Destination DC has a local storage configured using LVM. Note: Used common export domain to export the VM. Anyone, please help me on this case to understand why it’s failing. Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives:
[ovirt-users] Ovirt Hosted Engine Setup
Hi All, I am trying to deploy hosted engine setup, the setup got stuck at below for hours: Is this is a known bug? Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/P262DKO5PXV7LJIWMM4TMZH6IHKPLFFX/
[ovirt-users] Hosted Engine Ovirt 4.3.8
Hi Everyone, Does anyone has any idea why hosted engine setup stuck at “Wait for host to be up”. It’s been 4 hours deployment is going on and got stuck. Any help please..!! Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XJOXTAN434KIIBPIDBHLHZQRAKCOATKE/
[ovirt-users] Hosted Engine | Ovirt 4.4.1
Hi Everyone Getting below error when deploying hosted engine: [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false, "msg": "The Python 2 yum module is needed for this module. If you require Python 3 support use the `dnf` Ansible module instead."} Any idea how to fix it? Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PDJZ24TUW3V6LFHGR65QVEZ6K4ONUEHG/
[ovirt-users] Re: Hosted Engine | Ovirt 4.4.1
Anyone has any solution for this? Vijay Sachdeva From: Vijay Sachdeva Date: Wednesday, 22 July 2020 at 4:56 PM To: None via Users Subject: Hosted Engine | Ovirt 4.4.1 Hi Everyone Getting below error when deploying hosted engine: [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false, "msg": "The Python 2 yum module is needed for this module. If you require Python 3 support use the `dnf` Ansible module instead."} Any idea how to fix it? Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CHW6T43RQ4XKA6TV7CARPAKRODNJWWPR/
[ovirt-users] Hosted Engine 4.4.1
Hello Everyone, Waiting for host to be up task is stuck for hours and when checked engine log found this below: 2020-07-22 16:50:35,717+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-1) [] OAuthException access_denied: Cannot authenticate user 'None@N/A': No valid profile found in credentials.. Has anyone faced such issue then please help me out..!! Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QV27EGUU5F6EWZTHN6YE7W6BZ77RIC42/
[ovirt-users] Ovirt Manager HA
Hi All, Is there a documentation on creating Ovirt-Manager in HA or is it possible to make the manager to run in HA environment. Since it seems to be a single point of failure..!! Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDGGF2JUDD2BP2ST5AEZNITEDPQYDAPI/
[ovirt-users] Hosted Engine Deployement
Hi All, It tried deploying hosted engine using cli and got this error every time: Can anyone please let me know what here is missing..!! As it would be a great help.patri Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XRLXD5EUCS57KACBSTGLSZIXYAOZHDM4/
[ovirt-users] Re: Ovirt Hosted Engine Setup
Hi Ritesh, You mean 4.4 version? Thanks On Tue, Jul 21, 2020, 09:29 Ritesh Chikatwar wrote: > Hello Vijay... > > > Please try with the latest appliance this issue has been fixed. > > On Mon, Jul 20, 2020 at 1:42 PM Vijay Sachdeva via Users > wrote: > >> Hi Patrick, >> >> Tried installing using cockpit, got stuck at the same. Don't know what's >> wrong here and I am stuck from 2 days. >> >> Any help..!! >> >> Thanks >> Vijay Sachdeva >> >> >> On 20/07/20, 1:04 PM, "Patrick Lomakin" >> wrote: >> >> I have also seen this. Long time later the hosted-engine setup threw >> an error, but after install from cockpit panel an error disappeared. Try >> this too) Regards! >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4BRO44ETSZPMF42RGWOENXZDJWHPYBN/ >> >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/privacy-policy.html >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/QJZW267G65PWL4PLTR2DC746ZTNQVGWB/ >> > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DSMAT2KFZXVAOD4DNBDC4ICCXZADWNWL/
[ovirt-users] Re: Hosted Engine Deployement
Hi Everyone, I resolved this issue using below link: https://bugzilla.redhat.com/show_bug.cgi?id=1602267 But now it got stuck at below: Any one any idea how we can resolve this..!! Thanks Vijay Sachdeva From: Vijay Sachdeva Date: Tuesday, 21 July 2020 at 9:00 AM To: Strahil Nikolov via Users Cc: Patrick Lomakin Subject: Hosted Engine Deployement Hi All, It tried deploying hosted engine using cli and got this error every time: Can anyone please let me know what here is missing..!! As it would be a great help.patri Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XHH4VD2JFJLJ74YYJZUOJSJ4BLQXRTXN/
[ovirt-users] Re: Ovirt Hosted Engine Setup
Hi Ritesh, Currently I can’t use 4.4, I am using 4.3.8 for the deployment and now using from CLI it got stuck here: I want to understand, what actually it is trying to do in the backend. Is it like trying to create the bridge and getting the network UP? As it is again stuck for past 1 hour Thanks Vijay Sachdeva From: Vijay Sachdeva Date: Tuesday, 21 July 2020 at 9:52 AM To: Ritesh Chikatwar Cc: Patrick Lomakin , users Subject: Re: [ovirt-users] Re: Ovirt Hosted Engine Setup Hi Ritesh, You mean 4.4 version? Thanks On Tue, Jul 21, 2020, 09:29 Ritesh Chikatwar wrote: Hello Vijay... Please try with the latest appliance this issue has been fixed. On Mon, Jul 20, 2020 at 1:42 PM Vijay Sachdeva via Users wrote: Hi Patrick, Tried installing using cockpit, got stuck at the same. Don't know what's wrong here and I am stuck from 2 days. Any help..!! Thanks Vijay Sachdeva On 20/07/20, 1:04 PM, "Patrick Lomakin" wrote: I have also seen this. Long time later the hosted-engine setup threw an error, but after install from cockpit panel an error disappeared. Try this too) Regards! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4BRO44ETSZPMF42RGWOENXZDJWHPYBN/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QJZW267G65PWL4PLTR2DC746ZTNQVGWB/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/O7KUMMQ6V2TVUFL6IAGU4WBRFNR5Z7ER/
[ovirt-users] Re: Hosted Engine 4.4.1
Anyone please can help me out on this.? Vijay Sachdeva From: Vijay Sachdeva Date: Wednesday, 22 July 2020 at 8:24 PM To: Florian Schmid via Users Subject: Hosted Engine 4.4.1 Hello Everyone, Waiting for host to be up task is stuck for hours and when checked engine log found this below: 2020-07-22 16:50:35,717+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils] (default task-1) [] OAuthException access_denied: Cannot authenticate user 'None@N/A': No valid profile found in credentials.. Has anyone faced such issue then please help me out..!! Thanks Vijay Sachdeva ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YB3KXJLSJH7S6M4BQVBZB6YAT77MN2YB/
[ovirt-users] Re: Hosted Engine 4.4.1
Which version to use for Self-hosted deployment? Thanks Vijay Sachdeva On 23/07/20, 1:12 AM, "Strahil Nikolov" wrote: There is a bug whose fix is pending release. Best Regards, Strahil Nikolov На 22 юли 2020 г. 17:54:11 GMT+03:00, Vijay Sachdeva via Users написа: >Hello Everyone, > > > >Waiting for host to be up task is stuck for hours and when checked >engine log found this below: > > > >2020-07-22 16:50:35,717+02 ERROR >[org.ovirt.engine.core.sso.utils.SsoUtils] (default task-1) [] >OAuthException access_denied: Cannot authenticate user 'None@N/A': No >valid profile found in credentials.. > > > > > >Has anyone faced such issue then please help me out..!! > > > >Thanks > >Vijay Sachdeva > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/H2NG5WBEBAOQKQSN7TE5MGPRB6XFIQEC/