[ovirt-users] Upgrading manger from 4.4 to 4.5 - repo/dependency issues
My system is Rocky 8.9 I am running into some issues with upgrading. I am following the guide - https://www.ovirt.org/documentation/upgrade_guide/index.html#Upgrading_the_Manager_to_4-5_4-4_local_db I also followed https://www.ovirt.org/download/install_on_rhel.html and took care of the Rocky sepecific section along with the "Common to RHEL 8.6 and derivatives" When running the upgrade 3.2. Updating the oVirt Engine, step #3 engine-setup fails with: [ ERROR ] DNF Problem 1: package ovirt-engine-4.5.4-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2. 14, but none of the providers can be installed - cannot install the best candidate for the job - package postgresql-jdbc-42.2.14-0.1.el8_6.noarch from centos-ovirt45 is filtered out by exclude filte ring - package postgresql-jdbc-42.2.27-1.el8.noarch from centos-ovirt45 is filtered out by exclude filtering - package postgresql-jdbc-42.2.14-2.el8.noarch from appstream is filtered out by exclude filtering - package postgresql-jdbc-42.2.14-2.el8.noarch from devel is filtered out by exclude filtering Problem 2: problem with installed package ovirt-engine-4.4.10.7-1.el8.noarch - cannot install the best update candidate for package ovirt-engine-4.4.10.7-1.el8.noarch - cannot install the best update candidate for package ansible-runner-service-1.0.7-1.el8.noarch - package ovirt-engine-4.5.3.1-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14, bu t none of the providers can be installed - package ovirt-engine-4.5.3.2-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14, bu t none of the providers can be installed - package ovirt-engine-4.5.4-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package ovirt-engine-4.5.1.2-1.el8.noarch from ovirt-45-upstream requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package ovirt-engine-4.5.1.3-1.el8.noarch from ovirt-45-upstream requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package ovirt-engine-4.5.2.2-1.el8.noarch from ovirt-45-upstream requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package ovirt-engine-4.5.2.4-1.el8.noarch from ovirt-45-upstream requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package ovirt-engine-4.5.2.5-1.el8.noarch from ovirt-45-upstream requires postgresql-jdbc >= 42.2.14, but none of the providers can be installed - package postgresql-jdbc-42.2.14-0.1.el8_6.noarch from centos-ovirt45 is filtered out by exclude filte ring - package postgresql-jdbc-42.2.27-1.el8.noarch from centos-ovirt45 is filtered out by exclude filtering - package postgresql-jdbc-42.2.14-2.el8.noarch from appstream is filtered out by exclude filtering - package postgresql-jdbc-42.2.14-2.el8.noarch from devel is filtered out by exclude filtering Problem 3: problem with installed package ansible-runner-service-1.0.7-1.el8.noarch - cannot install the best update candidate for package ovirt-engine-4.4.10.7-1.el8.noarch - cannot install the best update candidate for package ansible-runner-service-1.0.7-1.el8.noarch - package ovirt-engine-4.5.3.1-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14, bu t none of the providers can be installed - package ovirt-engine-4.5.3.2-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14, bu t none of the providers can be installed - package ovirt-engine-4.5.4-1.el8.noarch from centos-ovirt45 requires postgresql-jdbc >= 42.2.14,
[ovirt-users] Re: How to run virt-sysprep / How to troubleshoot template creation failure
I'll send you the VDSM log. To answer you questions: Yes Yes No, the cloned VM boots to the grub prompt. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQG6SJL73OO426GRRXCVYHUIWG5UD3MS/
[ovirt-users] Re: How to run virt-sysprep / How to troubleshoot template creation failure
I was able to gather a VDSM log. Would you still like the VDSM logs? The template creation process seems to be working in the sense that the template always gets created. Now my problem has changed to having trouble with the system booting to a grub prompt as mentioned in the first post. Would the logs be of any use if the template creation process finishes? I don't understand why any VMs created from the template boot to the grub prompt. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UB2ZO7TQK2DIIUNXBBZ6RUGDAUWXVCXW/
[ovirt-users] Re: How to run virt-sysprep / How to troubleshoot template creation failure
Tomas, thank you for your input. I am creating the template from a new Ubuntu VM that I have created. I have noted that generally my centos/rocky VMs can be created from VMs without issue. It has only been Ubuntu that is giving me grief. That being said, I only have one Ubuntu VM in my environment that needs to be made into a template. Fix the template or recreate it makes no difference to me. As long as the template is usable that's all that matters. I have block storage, not NFS. You mention needing to prepare the disk images first... how? In my experience I didn't need to do that for any centos VMs. I just clicked make template in GUI, selected QCOW image type and seal VM option. In a few minutes everything was done and I could use the new template. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/U7ORMSKRQBL47B3P327A2ZYLVEQB63JZ/
[ovirt-users] How to run virt-sysprep / How to troubleshoot template creation failure
When attempting to create a template the process fails. It has been suggested to run virt-sysprep manually and see why it it failed. Specifically, I have an Ubuntu 20.04 machine that doesn't boot properly even if the the template process does finish without error. I have tried creating the template several times as a test. about 80% of the time the template creation fails outright for qemu errors. The other 20% "appear" to work but the system boots to a grub emergency prompt Can someone clarify the process? I know you can run the command: virt-sysprep -d 1. Where do you run it from? The hypervisor host or the management engine? 2. What account do you need to use? What is the authentication username and password? I also think I read somewhere that you should refrain from using root. Anything else to know? Anything else to try regarding the grub prompt? Thanks. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ICWANF6XMXTBHXUVMPXK442KMSRLOXI7/
[ovirt-users] Re: Cloud-Init - What am I doing wrong?
Ok, I figured out my own problem. The minimum config needed is as follows- #cloud-config users: - name: ansuser lock_passwd: false passwd: $6$TcX2D/LcPtq/a$m6AKlcIbZXL9ZJGNSgeXjnKGsz98Yw.v7rt5m18zunittqjMTygf7KLliwxXwzFrvj8rrFpOMGZmUYoX.mWib. Without the lock_passwd parameter the account was created but locked. I figured that out after adding a root account and logging in to review /etc/passwd and /etc/shadow. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4LBOCO4PKIHLYKIBGMU5TX5FOLFC4ST5/
[ovirt-users] Cloud-Init - What am I doing wrong?
I am running into an issue using Cloud-Init on CentOS 7. I have imported OpenStack Glance Generic cloud images for CentOS 7 & 8 and I chose to save them as a template at the time of import. In the template, under Initial Config I defined the following values: -cloud-init : checked -configure time zone: checked -choose dropdown for the correct timezone -VM Hostname, Authentication & Networks are all blank -Custom script: #cloud-config users: - name: ansuser passwd: $6$TcX2D/LcPtq/a$m6AKlcIbZXL9ZJGNSgeXjnKGsz98Yw.v7rt5m18zunittqjMTygf7KLliwxXwzFrvj8rrFpOMGZmUYoX.mWib. In theory I think this should create my user and set the password for my user. When I go to login to the system the login for my new user fails. What am I doing wrong? If I leave the Custom Script blank and put the user in the Authentication section the login works as expected. This tells me the image itself is working properly and is accepting Cloud-Init input. It would be my preference to add the user under the Custom Script section so I can further extend some functionality such as sudo: ALL=(ALL) NOPASSWD:ALL and SSH keys so that an initial Ansible config could be run easily. I am going to test 8 in the same manner and see what happens. I sort of expect the same results though. Thanks in advance for you input! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UCCUGNTZBHP6CQJ4FYAMHEAEKVDKVZCU/
[ovirt-users] Move Self Hosted Engine to Standalone
I have a single oVirt host running a self-hosted engine. I'd like to move the engine off the host and run it on a standalone server. I am running Software Version:4.3.6.6-1.el7 Can anyone tell me what the procedure is for that? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/C7IRADM7HZWRAD6Y6F76T5CS4ABQ3Y3R/
[ovirt-users] What is this error message from?
I have seen this error message repeatedly when reviewing events.
VDSM vmh.cyber-range.lan command HSMGetAllTasksStatusesVDS failed: low level
Image copy failed: ("Command ['/usr/bin/qemu-img', 'convert', '-p', '-t',
'none', '-T', 'none', '-f', 'raw',
u'/rhev/data-center/mnt/glusterSD/storage.cyber-range.lan:_vmstore/dd69364b-2c02-4165-bc4b-2f2a3b7fc10d/images/c651575f-75a0-492e-959e-8cfee6b6a7b5/9b5601fe-9627-4a8a-8a98-4959f68fb137',
'-O', 'qcow2', '-o', 'compat=1.1',
u'/rhev/data-center/mnt/glusterSD/storage.cyber-range.lan:_vmstore/dd69364b-2c02-4165-bc4b-2f2a3b7fc10d/images/6a2ce11a-deec-41e0-a726-9de6ba6d4ddd/6d738c08-0f8c-4a10-95cd-eeaa2d638db5']
failed with rc=1 out='' err=bytearray(b'qemu-img: error while reading sector
24117243: No such file or directory\\n')",)
Can someone explain what this is? How do I get this cleared up/resolved?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KBNSTWBZFN7PGWW74AGAGQVPNJ2DIZ6S/
[ovirt-users] Re: Template for Ubuntu 18.04 Server Issues
Yes, I am using DHCP. I'll review the MAC address and try running virt-sysprep and report back. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/H7TC4VSK2I2W7FW7TU6MKURY7Z7QFTOT/
[ovirt-users] Template for Ubuntu 18.04 Server Issues
I have built a system as a template on oVirt. Specifically, Ubuntu 18.04 server. I am noticing an issue when creating new vms from that template. I used the check box for "seal template" when creating the template. When I create a new Ubuntu VM I am getting duplicate IP addresses for all the machines created from the template. It seems like the checkbox doesn't fully function as intended. I would need to do further manual steps to clear up this issue. Has anyone else noticed this behavior? Is this expected or have I missed something? Thanks for your input! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RKDPPLDO6R4PXX2QXD77DWMF2ZDUXDW2/
[ovirt-users] Re: Strategy to Mange Ovirt VMs Created from Templates
Thank you for your reply Luca, In general your work flow is helpful and makes sense to me. I meant to say above- "As part of the template creation process ***the Ovirt docs*** say to seal the VM". So I think I understand that you need to use both processes (seal template + cloudinit) to get everything to work as desired. I'd still appreciate any more specifics about what sealing a VM does. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BRLNWOQB6FM4BUOW5JDG2RGKDSLWCFOV/
[ovirt-users] Strategy to Mange Ovirt VMs Created from Templates
I want to be able to manage VMs using Ansible. As part of the template creation process it says to seal the VM. Can someone tell me what sealing does to a Linux VM? I understand it removes some of things that make the VM unique but no real specifics. So, if I want to manage a VM created from a template would this general process work?- Seal the VM Install CloudInit and keys, accounts, etc Shut off VM and create template from it. Create new VM using Ansbile & CloudInit CloudInit would have just enough info so that you could manage the VM with Ansible. Would that work? I am just starting to explore what CloudInit can do and what it is. I am brand new to it. I didn't find enough info on template sealing to help me devise a full cycle management strategy. Perhaps there are other/easier methods? Thanks for your advice and input. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PJ6OOPUT3KJEME6PEZJIX4FN4YA7BB6K/
[ovirt-users] Re: ovirtsdk4 error
I should have caught that. This is my first time using this project so I sort of thought I might have a config issue (my fault) Yes, I agree after reviewing https://github.com/myoung34/vagrant-ovirt4 I see the example file lists "api" at the end of the url. I'll confirm later today. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XHLOO55D6AFAN2TFLVJPN2CRAAPP5GU/
[ovirt-users] ovirtsdk4 error
I have a server which runs a project from Github called SecGen. SecGen uses Vagrant to provision VMs from templates. When I go to my project folder and run vagrant up I get an error. user@localhost:~/bin/SecGen/projects/SecGen20191207_183811$ vagrant up Bringing machine 'escalation' up with 'ovirt4' provider... ==> escalation: Creating VM with the following settings... ==> escalation: -- Name: SecGen-default-scenario-escalation ==> escalation: -- Cluster: Default ==> escalation: -- Template: Vcentos77 ==> escalation: -- Console Type: spice ==> escalation: -- Memory: ==> escalation: Memory: 512 MB ==> escalation: Maximum: 512 MB ==> escalation: Guaranteed: 512 MB ==> escalation: -- Cpu: ==> escalation: Cores: 1 ==> escalation: Sockets: 1 ==> escalation: Threads: 1 ==> escalation: -- Cloud-Init:false ==> escalation: An error occured. Recovering.. ==> escalation: VM is not created. Please run `vagrant up` first. /home/user/.vagrant.d/gems/2.4.9/gems/ovirt-engine-sdk-4.0.12/lib/ovirtsdk4/reader.rb:272:in `read': Can't find a reader for tag 'html' (OvirtSDK4::Error) from /home/user/.vagrant.d/gems/2.4.9/gems/ovirt-engine-sdk-4.0.12/lib/ovirtsdk4/service.rb:66:in `check_fault' from /home/user/.vagrant.d/gems/2.4.9/gems/ovirt-engine-sdk-4.0.12/lib/ovirtsdk4/services.rb:35570:in `add' from /home/user/.vagrant.d/gems/2.4.9/gems/vagrant-ovirt4-1.2.2/lib/vagrant-ovirt4/action/create_vm.rb:67:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/before_trigger.rb:23:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/after_trigger.rb:26:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /home/user/.vagrant.d/gems/2.4.9/gems/vagrant-ovirt4-1.2.2/lib/vagrant-ovirt4/action/set_name_of_domain.rb:17:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/before_trigger.rb:23:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:121:in `block in finalize_action' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builder.rb:116:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/runner.rb:102:in `block in run' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/util/busy.rb:19:in `busy' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/runner.rb:102:in `run' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/call.rb:53:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/before_trigger.rb:23:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/after_trigger.rb:26:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /home/user/.vagrant.d/gems/2.4.9/gems/vagrant-ovirt4-1.2.2/lib/vagrant-ovirt4/action/connect_ovirt.rb:31:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/before_trigger.rb:23:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/after_trigger.rb:26:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/builtin/config_validate.rb:25:in `call' from /opt/vagrant/embedded/gems/2.2.6/gems/vagrant-2.2.6/lib/vagrant/action/warden.rb:50:in `call' from
[ovirt-users] Re: multiple vm got stack after gluster server hardware failure
If you can define "stuck" with some more detail I am sure many here could help you further. Are the VMs in question displayed as "paused" by the engine? Have you tried using virsh at the command line to see if you can shutdown or start the VMs? I have found that sometimes virsh will work to interact with the VMs when the GUI interface will not. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OQEUW3CO7AAJGFILQ6EMBN3NZF5CZTSP/
[ovirt-users] Re: Ovirt Node 4.3.6 Logical Network Issue - Network Down
I did some further testing. In short, if I attach logical network/VLAN 103 to enp96s0f0 the network will come up and be available for use. If I attach VLAN 103 to enp96s0f1 the logical network never comes up. I have sort of answered my own question, though I don't fully understand why. If my memory serves me correctly, I had used the exact same router setup on my 4.2.7 Ovirt node. I believe I was able to use VLAN 103 on either interface without issue. Is there something different about 4.3.6 Ovirt node? Is there some sort of rule that won't allow a logical network to be shared with the same interface as the interface for storage/gluster? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XPBLDDB6HBMX2MJ6O5RCZONYEW5637LS/
[ovirt-users]Re: Can ovirt-node support multiple network cards ？
I am unable to tell from your question what research you have done or what you have tried so far. Anyway, review this- https://ovirt.org/documentation/admin-guide/chap-Logical_Networks.html. Generally speaking, the checkbox for "Connect to physical network" should not be needed for your example. You most likely will need to set up VLANs when you create the logical network. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D5IJME6AMGGH5UU62TJHPXNKMMPCMFMX/
[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails
>>>Congratulations LOL, yes That's just about right. I'd say I agree with you. The language used in the error output wasn't real clear to me either. I'll have to add something in the docs that say: ***WARNING/*** Fencing will not work on a single host. You must have at least 2 hosts in the cluster for fencing to work properly. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DWELA6CNQYGB7RIFG42RSWOCF3ZWUYCE/
[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails
Oh wait! Now I see what you mean: Test failed: Failed to run fence status-check on host 'vmh.cyber-range.lan'. No other host was available to serve as proxy for the operation. The 2nd host would be the proxy... Well bummer. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3WHRAGIBUL2X7CR5JEZXLSNNR3ASE3Z5/
[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails
No just a single host. I didn't see any documentation that said you need two or more hosts. You could be right. I did some further testing by installing ipmitool on my laptop. [root@lt ~]# ipmitool -v -I lanplus -H 172.30.50.2 -U ADMIN session info all Password: session handle: 0 slot count: 16 active sessions : 1 user id : 2 privilege level : ADMINISTRATOR session type : IPMIv2/RMCP+ channel number: 0x01 Maybe a one of the DEVs could chime in and confirm if this is expected behavior? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WEXT7RKKBKIOFKWMZRSCJJE4U7MQ7LKZ/
[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails
I did totally remove that value. It still fails. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LWQA536AZ773IJC5A3ZRU3BVKPZFAZSU/
[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails
I tried lanplus=0 and totally removing it. The result is the same, test failed. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JMP7QZN2CR3BD57U6U5JBWUZXRD4NS2I/
[ovirt-users] Fencing Agent using SuperMicro IPMI Fails
I am trying to setup my power management fencing agent on the host. Address: I put in the IP address of the web page for IPMI. (Which does work via my web browser without issue) Username: ADMIN PW: my_password Type: ipmilan Options: lanplus=1 I click on the test button and it fails. Board Manufacturer: Supermicro Board Product Name: X11DPi-N Any suggestions for troubleshooting? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OCFKLRXAOPG4FWGH2DOGSQS4HGGOBPIK/
[ovirt-users] Ovirt Node 4.3.6 Logical Network Issue - Network Down
I have built a new host and my setup is a single hyperconverged node.. I followed the directions to create a new logical network. I see that the engine has marked the network as being down. (Hosts>Network Interfaces Tab>Setup Host Networks) Here is my network config on the host- [root@vmh ~]# ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp96s0f0: mtu 1500 qdisc mq master ovirtmgmt state UP group default qlen 1000 link/ether 0c:c4:7a:f9:b9:88 brd ff:ff:ff:ff:ff:ff 3: enp96s0f1: mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 0c:c4:7a:f9:b9:89 brd ff:ff:ff:ff:ff:ff inet 172.30.51.2/30 brd 172.30.51.3 scope global noprefixroute dynamic enp96s0f1 valid_lft 82411sec preferred_lft 82411sec inet6 fe80::d899:439c:5ee8:e292/64 scope link noprefixroute valid_lft forever preferred_lft forever 19: ;vdsmdummy;: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 96:e4:00:aa:71:f7 brd ff:ff:ff:ff:ff:ff 23: ovs-system: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 36:0f:60:69:e1:2b brd ff:ff:ff:ff:ff:ff 24: br-int: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether f6:3b:14:e1:15:48 brd ff:ff:ff:ff:ff:ff 25: ovirtmgmt: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 0c:c4:7a:f9:b9:88 brd ff:ff:ff:ff:ff:ff inet 172.30.50.3/24 brd 172.30.50.255 scope global dynamic ovirtmgmt valid_lft 84156sec preferred_lft 84156sec inet6 fe80::ec4:7aff:fef9:b988/64 scope link valid_lft forever preferred_lft forever 26: vnet0: mtu 1500 qdisc mq master ovirtmgmt state UNKNOWN group default qlen 1000 link/ether fe:16:3e:50:53:cd brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe50:53cd/64 scope link valid_lft forever preferred_lft forever VLAN 101 is attached to enp96s0f0 which is my ovirtmgmt interface. -IP range 172.30.50.x VLAN 102 is attached to enp96s0f1 which is my storage NIC for gluster. -IP range 172.30.51.x VLAN 103 is attached to enp96s0f1 is intended for most of my VMs that are not infrastructure related. -IP range 192.168.2.x I am pretty confident my router/switch is setup correctly.. As a test, I can go to localhost>networking>add VLAN and assign enp96s0f1 to VLAN 103 and it does get an IP address in the 192.168.2.x range. The host can also ping the 192.168.2.1 gateway. Why doesn't the engine think the VLAN is up? Which logs do I need to review? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/E6QJMU327EYYOWRAAHCT666ZGQEY6NGS/
[ovirt-users] Thin pool best proctices
After a week of downtime from a thin pool that had 100% full metadata I decided to rebuild my single node. My post was formerly titled: Ovirt 4.2.7 won't start and drops to emergency console. I have backups of nearly all my VMs and I am working on importing them. I went from version 4.2.7.1 to 4.3.6. I am comfortable with LVM but I am new to administering thin pool LVM. I am asking myself what can I do to avoid this headache in the future? What practical steps should I take? -Regular backups -Monitoring -Proper configuration It's the last one that is the most difficult for me. You don't know what you don't know Can anyone share tips and advice? I learned that /etc/LVM has backups. It should be part of the backup strategy. I now know that thin pools have a special metadata volume that should be monitored for disk space. At the time I built the system I used the gedploy gluster config file. I had assumed the values in there were "safe". As I found out the hard way, reality proved otherwise. I was reading elsewhere about allowing the thin volume to grow 20% as needed but no real mention of how to do that or a good example. As I understand it, the config to make that happen exists in lvm.conf. Is that right? Have there been any changes in Ansible GlusterFS setup since 4.2.7 to choose different "safe" values with newer versions? I hope my comments won't be taken as critical by any Dev Team members regarding Ansible. My sole intent for this post is so I learn what to do better/right next time. I do have most of my VMs and the few I lost are not critical. It was lucky that I learned a hard lesson the easy way. Thanks for your input! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YEBEHAQKF7CNIU4K6KG4DNA5FINK35VV/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
I did some checking and my disk is not in a state I expected. (The system doesn't even know the VG exists in it's present state) See the results: # pv PV VG Fmt Attr PSize PFree /dev/md127 onn_vmh lvm2 a-- 222.44g 43.66g /dev/sdd1 gluster_vg3 lvm2 a-- <4.00g <2.00g # pvs -a PVVG Fmt Attr PSize PFree /dev/md127onn_vmh lvm2 a-- 222.44g 43.66g /dev/onn_vmh/home --- 0 0 /dev/onn_vmh/ovirt-node-ng-4.2.7.1-0.20181216.0+1 --- 0 0 /dev/onn_vmh/root --- 0 0 /dev/onn_vmh/swap --- 0 0 /dev/onn_vmh/tmp --- 0 0 /dev/onn_vmh/var --- 0 0 /dev/onn_vmh/var_crash --- 0 0 /dev/onn_vmh/var_log --- 0 0 /dev/onn_vmh/var_log_audit --- 0 0 /dev/sda1 --- 0 0 /dev/sdb1 --- 0 0 /dev/sdd1 gluster_vg3 lvm2 a-- <4.00g <2.00g /dev/sde1 --- 0 0 # vgs VG #PV #LV #SN Attr VSize VFree gluster_vg3 1 1 0 wz--n- <4.00g <2.00g onn_vmh 1 11 0 wz--n- 222.44g 43.66g # vgs -a VG #PV #LV #SN Attr VSize VFree gluster_vg3 1 1 0 wz--n- <4.00g <2.00g onn_vmh 1 11 0 wz--n- 222.44g 43.66g # lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert tmpLVgluster_vg3 -wi--- 2.00g home onn_vmh Vwi-aotz-- 1.00g pool00 4.79 ovirt-node-ng-4.2.7.1-0.20181216.0 onn_vmh Vwi---tz-k 146.60g pool00 root ovirt-node-ng-4.2.7.1-0.20181216.0+1 onn_vmh Vwi-aotz-- 146.60g pool00 ovirt-node-ng-4.2.7.1-0.20181216.0 4.81 pool00 onn_vmh twi-aotz-- 173.60g 7.21 2.30 root onn_vmh Vwi-a-tz-- 146.60g pool00 2.92 swap onn_vmh -wi-ao 4.00g tmp onn_vmh Vwi-aotz-- 1.00g pool00 53.66 var onn_vmh Vwi-aotz-- 15.00g pool00 15.75 var_crashonn_vmh Vwi-aotz-- 10.00g pool00 2.86 var_log onn_vmh Vwi-aotz-- 8.00g pool00 14.73 var_log_auditonn_vmh Vwi-aotz-- 2.00g pool00 6.91 # lvs -a LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert tmpLVgluster_vg3 -wi--- 2.00g home onn_vmh Vwi-aotz-- 1.00g pool00 4.79 [lvol0_pmspare] onn_vmh ewi--- 180.00m ovirt-node-ng-4.2.7.1-0.20181216.0 onn_vmh Vwi---tz-k 146.60g pool00 root ovirt-node-ng-4.2.7.1-0.20181216.0+1 onn_vmh Vwi-aotz-- 146.60g pool00 ovirt-node-ng-4.2.7.1-0.20181216.0 4.81 pool00 onn_vmh twi-aotz-- 173.60g
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
Sorry for the multiple posts. I had so many thoughts rolling around in my head. I'll try to consolidate my questions here and rephrase the last three responses. >>>"Try to get all data in advance (before deactivating the VG)". Can you clarify? What do you mean by this? >>>"I still can't imagine why the VG will disappear. Try with 'pvscan --cache' >>>to redetect the PV. Afrer all , all VG info is in the PVs' headers and >>>should be visible no matter the VG is deactivated or not." I'll try that and see what happens. >>>"Is this an oVirt Node or a regular CentOS/RHEL" oVirt Node >>>"You got 15GiB of metadata, so create your new metadata LV at least 30 GiB." My presumption is that 15 GB is the max size the was specified when it was initially built but not the actual size right now, but yes, making it larger does make sense. I was curious to know what the present size is. Also, lvconvert man page specifies a supported value between 2M and 16G I will create a larger metadata volume assuming I can get the procedure to work properly I am having some difficulty with the procedure, see below. My most important question was here: I am trying to follow the procedure from https://access.redhat.com/solutions/3251681 I am on step #2. Step 2a and 2b work without issue. Step 2c gives me an error. Here are the values I am using: # lvcreate -L 2G gluster_vg3 --name tmpLV (created with no issues) # lvchange -ay gluster_vg3/tmpLV (command completed with no issues) # lvconvert --thinpool gluster_vg1/lvthinpool --poolmetadata gluster_vg3/tmpLV Error: VG name mismatch from position arg (gluster_vg1) and option arg (gluster_vg3) Do I need to create the LV on the same disk that failed? (gluster_vg1) i.e.- perhaps my command is wrong and should be lvconvert --thinpool gluster_vg3/lvthinpool --poolmetadata gluster_vg3/tmpLV ** Perhaps this command assumes you already have a VG=gluster_vg3 and LV=lvthinpool? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/37ILSMSJAYHPZNGBKF4RVIN7XHDQGMSM/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
http://man7.org/linux/man-pages/man7/lvmthin.7.html Command to repair a thin pool: lvconvert --repair VG/ThinPoolLV Repair performs the following steps: 1. Creates a new, repaired copy of the metadata. lvconvert runs the thin_repair command to read damaged metadata from the existing pool metadata LV, and writes a new repaired copy to the VG's pmspare LV. 2. Replaces the thin pool metadata LV. If step 1 is successful, the thin pool metadata LV is replaced with the pmspare LV containing the corrected metadata. The previous thin pool metadata LV, containing the damaged metadata, becomes visible with the new name ThinPoolLV_tmetaN (where N is 0,1,...). If the repair works, the thin pool LV and its thin LVs can be activated, and the LV containing the damaged thin pool metadata can be removed. It may be useful to move the new metadata LV (previously pmspare) to a better PV. If the repair does not work, the thin pool LV and its thin LVs are lost. This info seems to conflict with Red Hat advice. Red Hat says if metadat volume is full don't run a lvconvert --repair operation. Now I am confused. I am familiar with LVM and comfortable with it but this is my first time trying to repair thin LVM. The concepts of a metadata volume are new to me. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FFN3HWUQVRPFSMXHECNJLJOFNF5ODAT6/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
Here is my fstab file: # /etc/fstab # Created by anaconda on Fri Dec 21 22:26:32 2018 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/onn_vmh/ovirt-node-ng-4.2.7.1-0.20181216.0+1 / ext4 defaults,discard 1 1 UUID=9b9546f9-25d2-42a6-835b-303f32aee4b1 /boot ext4 defaults1 2 /dev/mapper/onn_vmh-home /home ext4 defaults,discard 1 2 /dev/mapper/onn_vmh-tmp /tmp ext4 defaults,discard 1 2 /dev/mapper/onn_vmh-var /var ext4 defaults,discard 1 2 /dev/mapper/onn_vmh-var_log /var/log ext4 defaults,discard 1 2 /dev/mapper/onn_vmh-var_log_audit /var/log/audit ext4 defaults,discard 1 2 /dev/mapper/onn_vmh-swap swapswapdefaults0 0 /dev/gluster_vg1/engine_lv /gluster_bricks/engine xfs inode64,noatime,nodiratime 0 0 /dev/gluster_vg1/lv_vmdisks /gluster_bricks/vmstore xfs inode64,noatime,nodiratime 0 0 /dev/gluster_vg1/lv_datadisks /gluster_bricks/data xfs inode64,noatime,nodiratime 0 0 #/dev/sdd1 /gluster_bricks/iso xfs inode64,noatime,nodiratime 0 0 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VYQ22EFSGRYDESRQZAAQ6E327J67JANJ/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
I don't know why I didn't think to get some more info regarding my storage environment and post it here earlier. My gluster_vg1 volume is on /dev/sda1. I can access the engine storage directory but I think that is because it is not thin provisioned. I guess I was too bogged down in solving the problem when I'm stuck in emergency mode. I had to sneaker net my USB drive to my system so I could capture some info. Anyhow here it is: # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:00 5.5T 0 disk └─sda1 8:10 5.5T 0 part sdb 8:16 0 223.6G 0 disk ├─sdb1 8:17 0 1G 0 part /boot └─sdb2 8:18 0 222.6G 0 part └─md1279:127 0 222.5G 0 raid1 ├─onn_vmh-swap 253:00 4G 0 lvm [SWAP] ├─onn_vmh-pool00_tmeta 253:10 1G 0 lvm │ └─onn_vmh-pool00-tpool 253:30 173.6G 0 lvm │ ├─onn_vmh-ovirt--node--ng--4.2.7.1--0.20181216.0+1 253:40 146.6G 0 lvm / │ ├─onn_vmh-pool00 253:50 173.6G 0 lvm │ ├─onn_vmh-root 253:60 146.6G 0 lvm │ ├─onn_vmh-home 253:70 1G 0 lvm /home │ ├─onn_vmh-tmp 253:80 1G 0 lvm /tmp │ ├─onn_vmh-var 253:9015G 0 lvm /var │ ├─onn_vmh-var_log 253:10 0 8G 0 lvm /var/log │ ├─onn_vmh-var_log_audit253:11 0 2G 0 lvm /var/log/audit │ └─onn_vmh-var_crash253:12 010G 0 lvm /var/crash └─onn_vmh-pool00_tdata 253:20 173.6G 0 lvm └─onn_vmh-pool00-tpool 253:30 173.6G 0 lvm ├─onn_vmh-ovirt--node--ng--4.2.7.1--0.20181216.0+1 253:40 146.6G 0 lvm / ├─onn_vmh-pool00 253:50 173.6G 0 lvm ├─onn_vmh-root 253:60 146.6G 0 lvm ├─onn_vmh-home 253:70 1G 0 lvm /home ├─onn_vmh-tmp 253:80 1G 0 lvm /tmp ├─onn_vmh-var 253:9015G 0 lvm /var ├─onn_vmh-var_log 253:10 0 8G 0 lvm /var/log ├─onn_vmh-var_log_audit253:11 0 2G 0 lvm /var/log/audit └─onn_vmh-var_crash253:12 010G 0 lvm /var/crash sdc 8:32 0 223.6G 0 disk └─sdc1 8:33 0 222.6G 0 part └─md1279:127 0 222.5G 0 raid1 ├─onn_vmh-swap 253:00 4G 0 lvm [SWAP] ├─onn_vmh-pool00_tmeta 253:10 1G 0 lvm │ └─onn_vmh-pool00-tpool 253:30 173.6G 0 lvm │ ├─onn_vmh-ovirt--node--ng--4.2.7.1--0.20181216.0+1 253:40 146.6G 0 lvm / │ ├─onn_vmh-pool00 253:50 173.6G 0 lvm │ ├─onn_vmh-root 253:60 146.6G 0 lvm │ ├─onn_vmh-home 253:70 1G 0 lvm /home │ ├─onn_vmh-tmp 253:80 1G 0 lvm /tmp │ ├─onn_vmh-var 253:9015G 0 lvm /var │ ├─onn_vmh-var_log 253:10 0 8G 0 lvm /var/log │ ├─onn_vmh-var_log_audit253:11 0 2G 0 lvm /var/log/audit │ └─onn_vmh-var_crash253:12 010G 0 lvm /var/crash └─onn_vmh-pool00_tdata 253:20 173.6G 0 lvm └─onn_vmh-pool00-tpool 253:30 173.6G 0 lvm ├─onn_vmh-ovirt--node--ng--4.2.7.1--0.20181216.0+1 253:40 146.6G 0 lvm / ├─onn_vmh-pool00 253:50 173.6G 0 lvm ├─onn_vmh-root 253:6
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
"lvs -a" does not list the logical volume I am missing. "lvdisplay -m /dev/gluster_vg1-lvthinpool-tpool_tmeta" does not work either. Error message is: Volume Group xxx not found. Cannot process volume group xxx." I am trying to follow the procedure from https://access.redhat.com/solutions/3251681 I am on step #2 Step 2a and 2b work without issue. Step 2c give me an error. Here are the values I am using: # lvcreate -L 2G gluster_vg3 --name tmpLV # lvchange -ay gluster_vg3/tmpLV # lvconvert --thinpool gluster_vg1/lvthinpool --poolmetadata gluster_vg3/tmpLV VG name mismatch from position arg (gluster_vg1) and option arg (gluster_vg3) Do I need to create the LV on the same disk that failed? (gluster_vg1) Is creating a new LV on (gluster_vg3) ok for this situation? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OJN6VVEMQY743WFXHVZOZB3KAEIN6PWM/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
vgs displays everything EXCEPT gluster_vg1 "dmsetup ls" does not list the VG in question. That is why I couldn't run the lvchange command. They were not active or even detected by the system. OK, I found my problem, and a solution: https://access.redhat.com/solutions/3251681 # cd /var/log # grep -ri gluster_vg1-lvthinpool-tpool My metadata is 100% full !!! Now, how do I find out how big my original metadata size was so I can make the new one the correct size? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6PI2N24GVWL64UHVZ3BWF3KTJBRL2ALU/
[ovirt-users] Re: How should ovirt-engine be repaired if it is hung up
#1 How is it hung? Please provide more details. #2 The ovirt engine can be moved by creating a backup. See chap 12 of the admin guide- https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration.html ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/CXEV7P35HMK6WCH5ZTKXCK45M7XGTR43/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
Yes, I can take the downtime. Actually, I don't have any choice at the moment because it is a single node setup. :) I think this is a distributed volume from the research I have performed. I posted the lvchange command in my last post, this was the result- I ran the command lvchange -an /dev/gluster_vg1/lv_datadisks When I do this I get the message "Volume group "gluster_vg1" not found. Cannot process volume group gluster_vg1". I also tried the command the way you specified with just the LV and get the same results. I had placed the system in Global maintenance mode prior to the reboot. Upon reboot I got the messages about the various gluster volumes not being able to be mounted because of timeout issues. That is what started my OP. I think we are both thinking along the same lines regarding the issue. I think the question is how do you fix a volume that the system won't mount? It does seem likely that the thinpool needs to be repaired but what do you do if you can't even perform the first step in the procedure? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2X73CAASB4UCOK6Y25EBMGQBZBKKG7JV/
[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console
Thank you for the reply. Please pardon my ignorance, I'm not very good with GlusterFS. I don't think this is a replicated volume (though I could be wrong) I built a single node hyperconverged hypervisor. I was reviewing my gdeploy file from when I originally built the system. I have the following values: PV = /dev/sda VG1= gluster_vg1 LV1= engine_lv (thick) LV2 = gluster_vg1 thinpool LV3 = lv_vmdisks (thinpooll) LV4 = lv_datadisks (thinpool) So according to the article I read in my OP, it says to deactivate the volumes under the thin pool as the first step. I ran the command lvchange -an /dev/gluster_vg1/lv_datadisks When I do this I am told Volume group "gluster_vg1" not found. Cannot process volume group gluster_vg1. That seems consistent with the timeout error message. How do you fix this if you can't access the volumes? Thoughts? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HZXE3NCSFWCUIEN3GKRWKTCH3QZDA4PF/
[ovirt-users] Ovirt 4.2.7 won't start and drops to emergency console
I see evidence that appears to be a problem with gluster. /var/log/messages has multiple occurrences of: WARNING: /dev/gluster_vg1/lv_: Thin's tihin-pool needs inspection. Also, if I run vgs I am returned info for my other volume groups but not gluster_vg1. Lastly, when reviewing journalctl -xb | grep -i timed I see messages from systemd Job dev-gluster_vg1-lv_vmdisks.device/start timed.out. Timed out waiting for device dev-glustet_vg1-lv_vmdisks.device Thses messages are happening for both /dev/gluster_vg1/lv_datadisks /dev/gluster_vg1/lv_vmdisks I did review the article here but I am unable to change to VG1. https://mellowhost.com/billing/index.php?rp=/knowledgebase/65/How-to-Repair-a-lvm-thin-pool.html Can anyone assist with a procedure on how to repair? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VCHU2Q4RD5QWNMHFCSXFMWFIHANJGUE2/
[ovirt-users] Upgrade Hyperconverged Single Node
Does this page apply? https://www.ovirt.org/documentation/upgrade-guide/chap-Updates_between_Minor_Releases.html My Node is presently running 4.2.7 and I'd like to upgrade to 4.3.4 I was reading about needing to fail over so the SPM role is available (ie more than 1 host) If the page above is not applicable what is the procedure? Thanks! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PARUNTNWCXY2HJGJUBNZW4VUQ4ZWH6PL/
[ovirt-users] Hosted Engine Deployment Fails - Ansible Playbook
Can someone help me troubleshoot what my issue is? I have tried to setup
hosted engine using static and DHCP addresses and both times it fails. Many
thanks in advance!
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system
may not be provisioned according to the playbook results: please check the logs
for the issue, fix accordingly or re-deploy from scratch.\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
[root@vmh /]# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp96s0f0: mtu 1500 qdisc mq master
ovirtmgmt state UP group default qlen 1000
link/ether 0c:c4:7a:f9:b9:88 brd ff:ff:ff:ff:ff:ff
3: enp96s0f1: mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 0c:c4:7a:f9:b9:89 brd ff:ff:ff:ff:ff:ff
20: ovirtmgmt: mtu 1500 qdisc noqueue state
UP group default qlen 1000
link/ether 0c:c4:7a:f9:b9:88 brd ff:ff:ff:ff:ff:ff
inet 172.30.50.2/24 brd 172.30.50.255 scope global dynamic ovirtmgmt
valid_lft 84266sec preferred_lft 84266sec
inet6 fe80::ec4:7aff:fef9:b988/64 scope link
valid_lft forever preferred_lft forever
21: virbr0: mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 52:54:00:e2:1c:89 brd ff:ff:ff:ff:ff:ff
inet 192.168.124.1/24 brd 192.168.124.255 scope global virbr0
valid_lft forever preferred_lft forever
22: virbr0-nic: mtu 1500 qdisc pfifo_fast master virbr0
state DOWN group default qlen 1000
link/ether 52:54:00:e2:1c:89 brd ff:ff:ff:ff:ff:ff
23: vnet0: mtu 1500 qdisc pfifo_fast master
virbr0 state UNKNOWN group default qlen 1000
link/ether fe:16:3e:52:19:f4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc16:3eff:fe52:19f4/64 scope link
valid_lft forever preferred_lft forever
24: ;vdsmdummy;: mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 82:43:87:7f:eb:62 brd ff:ff:ff:ff:ff:ff
[root@vmh /]# df -h
FilesystemSize Used Avail
Use% Mounted on
/dev/mapper/onn_vmh-ovirt--node--ng--4.2.5.1--0.20180731.0+1 145G 3.1G 134G
3% /
devtmpfs 63G 0 63G
0% /dev
tmpfs 63G 4.0K 63G
1% /dev/shm
tmpfs 63G 19M 63G
1% /run
tmpfs 63G 0 63G
0% /sys/fs/cgroup
/dev/mapper/onn_vmh-var15G 4.5G 9.4G
33% /var
/dev/mapper/onn_vmh-tmp 976M 4.1M 905M
1% /tmp
/dev/mapper/onn_vmh-home 976M 2.6M 907M
1% /home
/dev/mapper/PNY_CS900_240GB_SSD_PNY14182241350103ED2p1976M 365M 545M
41% /boot
/dev/mapper/onn_vmh-var_log 7.8G 70M 7.3G
1% /var/log
/dev/mapper/onn_vmh-var_log_audit 2.0G 9.2M 1.8G
1% /var/log/audit
/dev/mapper/3600605b00a2faca222fb4da81ac9bdb1p1 7.4T 93M 7.1T
1% /srv
tmpfs 13G 0 13G
0% /run/user/0
I have pasted my log file- https://pastebin.com/dyYksxaC
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LPK7OGFALSQFAN4UMEIHOION4BS2HJLN/
