Thank you,
It really works!!
发件人: Eyal Shenitzky
发送时间: 2020年7月22日 13:50
收件人: tommy
抄送: users
主题: Re: [ovirt-users] how to remove host (phisical damaged) on ovirt web panel
??
Hi Tommy,
I am not sure about your environment state, but you have an option
The host is damaged, then the vms running on it also became unknown status.
I cannot remove the vm and host on ovirt web panel.
Somebody can give me saome advive ?
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email
is here some example to show me how to configure and use fencing to protect
vm cluster on Ovirt system ?
发件人: users-boun...@ovirt.org 代表 崔涛的个人邮
箱
发送时间: 2020年7月17日 17:39
收件人: users@ovirt.org
主题: [ovirt-users] about ovirt fence
If I configure fence for ovirt hosts, is the fence system
I saw through their administration panels that in Storage -> iScsi section
there are also two targets with different subnets and the command on the host
multipath -ll also showed the normal operation of the two targets.
That's mean that: multipath can not create a logic LUN which using two
Hi:
1.My server using as ovirt host is built on virtualbox and the cpu info is:
vendor_id : GenuineIntel
cpu family : 6
model : 142
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
stepping: 10
cpu MHz : 1992.002
cache size : 8192
Hi, everyone:
In my env, I can using web console connect to engine vm:
But , I can not using wen console to connect to other host's VMs. When I try
to connect vm, the VV console appears but soon it disappears, very quickly.
How can I using VV to connect to VMs ?
Thanks!
and engine on the standalone mode ?
-Original Message-
From: ybard...@redhat.com On Behalf Of Yedidyah Bar David
Sent: Wednesday, January 6, 2021 4:04 PM
To: tommy
Cc: users
Subject: Re: [ovirt-users] Re: How to install and configure the monitoring
portal ?
On Wed, Jan 6, 2021 at 9:32 AM
Yeah!
I got it.
-邮件原件-
发件人: users-boun...@ovirt.org 代表 YANJIANG Dong
发送时间: 2020年12月9日 15:21
收件人: users@ovirt.org
主题: [ovirt-users]Re: 回复: Re: 回复: Re: what error?
Hello, Tommy,
Check minimum storage requirements !!!
检查一下你的硬盘分配容量是否满足最低要求!!!
https://www.ovirt.org/documentation
Enterprise Linux hosts (Enterprise Linux hosts) and oVirt Nodes (image-based
hypervisors) are the two supported types of host. Hosts use Kernel-based
Virtual Machine (KVM) technology and provide resources used to run virtual
machines.
But what difference between the Enterprise Linux Hosts and
1、 If oVirt can be used to manage RHEV ?
2、 What relation between oVirt and RHEV?
Thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
Hi,everyone:
I got this error in my ovirt env:
VDSM ooengh1.tltd.com command Get Host Capabilities failed: Internal
JSON-RPC error: {'reason': 'internal error: Duplicate key'}
Systemctl message is:
Dec 23 20:48:48 ooengh1.tltd.com vdsm[2431]: ERROR Internal server error
What's meaning of the word OVF ?
What's OVF_STORE ?
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of
Hi,everyone!
butI tried using oVirt to Manage the KVM Libvirtd Server, like this:
But,it got error like this:
VDSM host1 command GetVmsNamesFromExternalProviderVDS failed: Cannot recv
data: Host key verification failed.: Connection reset by peer.
Should I configure SSH Host Key ?
发件人: users-boun...@ovirt.org 代表 tommy
发送时间: 2020年12月21日 10:47
收件人: users@ovirt.org
主题: [ovirt-users] oVirt can not connect to KVM Libvirtd
Hi,everyone!
butI tried using oVirt to Manage the KVM Libvirtd Server, like this:
But,it got error like this:
VDSM host1 command G
When I stop one server, the other one auto start the engine vm, and I can
not perform the maintaince.
Thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
I tried it, really works!
Thanks!
发件人: Parth Dhanjal
发送时间: 2020年12月21日 12:32
收件人: tommy
抄送: users
主题: Re: [ovirt-users] how to gracefully stop engine and the HA before maintain
the two host-engine servers ?
Hey!
These are the steps you need to follow
1. Shutdown all
If I add such providers like KVM and XEN, what can I do using oVirt?
To manage XEN or KVM usning oVirt?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Hi, everyone:
How to cancel a longtime running task on ovirt web interface ?
Task looks can not be cancelled.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Hi,everyone:
There's no monitoring portal in my oVirt env.
How to install and configure it in additional ?
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Hi,every one!
My env cannot access internet, but during the hosted-engine installation, It
needs to run yum install to update system.
I have made a yum source mirror local, but there is a step ( after create
engine vm, the vm runs yum update using default repo configure ) it failed
to
a Gluster Data Domain then the
Gluster servers are hosts which addition to my oVirt kvm hosts, so it’s not
Hyper-Converged.
I don’t like Hyper-Converged,
From: users-boun...@ovirt.org On Behalf Of Ritesh
Chikatwar
Sent: Thursday, January 21, 2021 12:54 PM
To: tommy
Cc: Ahmad Khiet
The DataCenter and Cluster cannot be chosen,
From: users-boun...@ovirt.org <mailto:users-boun...@ovirt.org>
mailto:users-boun...@ovirt.org> > On Behalf Of Ritesh
Chikatwar
Sent: Thursday, January 21, 2021 11:27 AM
To: tommy
Cc: Ahmad Khiet ; users
Subject:
I can create the gluster FS on gluster system, but using ovirt web management
site doing this make the whole management more easier.
From: users-boun...@ovirt.org On Behalf Of Ahmad Khiet
Sent: Thursday, January 21, 2021 2:43 AM
To: tommy
Cc: users
Subject: [ovirt-users] Re: Why
On Behalf Of Ahmad Khiet
Sent: Thursday, January 21, 2021 2:48 AM
To: tommy
Cc: users
Subject: [ovirt-users] Re: For data integrity make sure that the server is
configured with Quorum (both client and server Quorum)
Hi,
as shown in the alert message, that Quorum must be configured
Thank u!
From: Asaf Rachmani
Sent: Sunday, January 17, 2021 6:05 PM
To: tommy
Cc: users
Subject: Re: [ovirt-users] how to install hosted-engine without internet
connection ?
Hi Tommy,
You can use the following command to install hosted-engine without an internet
connection
Hi, everyone:
My test env is running on Ubuntu Libvirtd server, I configure the QEMU VM as
Physical Host, the hosts list is:
root@ubts1:~# virsh
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # list
Id
'}', policy='null'}), log id:
69fdd7b2
From: users-boun...@ovirt.org <mailto:users-boun...@ovirt.org>
mailto:users-boun...@ovirt.org> > On Behalf Of
tommy
Sent: Monday, January 18, 2021 12:24 PM
To: 'users'
Subject: [ovirt-users] How to configure Power Management Fe
.ohost1 -o status
Status: ON
[root@ohost1 ~]#
From: users-boun...@ovirt.org On Behalf Of tommy
Sent: Monday, January 18, 2021 2:08 PM
To: 'users'
Subject: [ovirt-users] Re: How to configure Power Management Fence Protocol
for Libvirtd VM ?
It raises JSON-RPC
When I want to create a glusterFS domain, the above words appear.
What's meaning of these words?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List
Thanks.
I know I should put the host to maintenance mode, but I don’t hnow what
function the Enroll Certificate will play ?
From: users-boun...@ovirt.org On Behalf Of Dana
Elfassy
Sent: Tuesday, January 19, 2021 9:39 PM
To: tommy
Cc: users
Subject: [ovirt-users] Re: About
Hi,
What function of the Enroll Certificate ??
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of
Cannot connect even closed firewalld service on hosts.
-Original Message-
From: users-boun...@ovirt.org On Behalf Of
matthew.st...@fujitsu.com
Sent: Thursday, January 14, 2021 11:20 PM
To: Strahil Nikolov ; tommy ;
eev...@digitaldatatechs.com
Cc: users@ovirt.org
Subject: [ovirt
Both IP and DNS name cannot be connected. Both using VNC, the windows program
is remote viewer.
I using netstat to trace, I found that at the begin the remote viewer estab a
tcp connection to VM's host's 5900 port, but soon the connection disconnect.
On the host, the qemu process listen on
Hi:
I use novnc console can connect to engine vm.
But when I using novnc console connect to other vm in other datacenter,
failed.
The ovirt-websocket-proxy log is:
Jan 19 15:43:32 ooeng.tltd.com ovirt-websocket-proxy.py[1312]:
192.168.10.104 - - [19/Jan/2021 15:43:32] connecting
I encountered the question too.
The follow file is the connect file for vm that can connect using remote
viewer:
[virt-viewer]
type=vnc
host=192.168.10.41
port=5900
password=rdXQA4zr/UAY
# Password is valid for 120 seconds.
delete-this-file=1
fullscreen=0
title=HostedEngine:%d
It not work even I stop the firewall on the hosts.
So, I think firewall is not the cause.
-Original Message-
From: Strahil Nikolov
Sent: Thursday, January 14, 2021 12:52 PM
To: tommy ; matthew.st...@fujitsu.com;
eev...@digitaldatatechs.com
Cc: users@ovirt.org
Subject: Re: [ovirt
-4fbd-86ac-d25014364f08
Display Name:
Email: sz_cui...@163.com <mailto:sz_cui...@163.com>
First Name: tommy
Last Name: cui
Department:
Title:
Description:
Account Disabled: false
Account Locked: false
Account Unlocked At: 1970-01-01 00:00:00Z
Account Valid From: 2021-01-15 05:23:41
Any way to limit different user to use different cluster and storage domain
?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of
Thanks you!
You are right, I have resolved it.
From: users-boun...@ovirt.org On Behalf Of Artur Socha
Sent: Friday, January 15, 2021 5:21 PM
To: tommy
Cc: users
Subject: [ovirt-users] Re: Create new user, but why cannot login ?
Hi Tommy,
It looks you are missing some
I can not register the engine on cockpit web console,
But, the engine runs well :
Why ???
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
The version is 4.3.6, and it's not hosted engine.
I'll have a try to run reconfigure-optional-com, thanks.
-Original Message-
From: ybard...@redhat.com On Behalf Of Yedidyah Bar David
Sent: Wednesday, January 6, 2021 2:40 PM
To: tommy ; Shirly Radco
Cc: users
Subject: Re: [ovirt
~]#
-Original Message-
From: tommy
Sent: Wednesday, January 6, 2021 2:51 PM
To: 'Yedidyah Bar David' ; 'Shirly Radco'
Cc: 'users'
Subject: RE: [ovirt-users] How to install and configure the monitoring portal ?
The version is 4.3.6, and it's not hosted engine.
I'll have a try
January 6, 2021 3:06 PM
To: tommy
Cc: users
Subject: [ovirt-users] Re: How to install and configure the monitoring portal ?
On Wed, Jan 6, 2021 at 8:51 AM tommy wrote:
>
> The version is 4.3.6, and it's not hosted engine.
It was added in 4.4, sorry.
See also recent thread on this list: [
The error log is :
VDSM olvms3 command GetVmsNamesFromExternalProviderVDS failed: Cannot recv
data: Host key verification failed.: Connection reset by peer
But if I use the virsh, it can connect.
[root@olvms1 ~]# virsh -c qemu+ssh://root@192.168.10.175/system
root@192.168.10.175's
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List
Thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
I still find a lot of errors in the document, but I don't know how to help?
Can you tell me the steps to improve the documentation?
I'd like to help in any way I can.
-Original Message-
From: Vojtech Juranek
Sent: Friday, July 30, 2021 3:01 PM
To: 'users'
Cc: tommy
Subject: Re
>From the document:
oVirt clusters have a compatibility version. The cluster compatibility
version indicates the features of oVirt supported by all of the hosts in the
cluster.
The cluster compatibility is set according to the version of the least
capable host operating system in the cluster.
, July 30, 2021 4:21 PM
To: tommy
Cc: users@ovirt.org
Subject: Re: [ovirt-users] About the cluster compatibility version
On Friday, 30 July 2021 09:51:08 CEST you wrote:
> I still find a lot of errors in the document, but I don't know how to
help?
> Can you tell me the steps to i
Hello, I have a question about cloud-init:
After installing vm, I installed cloud-init immediately, and enabled its
four services, and then I can use cloud-init in the admin interface.
However, I don't know how cloud-init knows where to get the relevant
information (such as host name, SSH
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s3:
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv4 inbound route rules]
[ INFO ] changed: [localhost]
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 outbound route rules]
[ INFO ] skipping: [localhost]
[ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add IPv6 inbound route
Thank you.
You really are an expert.
From: Ales Musil
Date: 2022-05-27 13:58
To: tommy
CC: users
Subject: [ovirt-users] Re: about the bridge of the host
Hi,
On Wed, May 25, 2022 at 8:21 AM tommy wrote:
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback
What configuration is not synchronized to the host?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
, Apr 24, 2013 at 5:57 AM, Juan Jose jj197...@gmail.com wrote:
Hello Tommy,
I had a similar experience and after try to recover my storage domain, I
realized that my VMs had missed. You have to verify if your VM disks are
inside of your storage domain. In my case, I had to add a new a new
storage_pool_iso_map set status=0 where
storage_id='774e3604-f449-4b3e-8c06-7cd16f98720c';
UPDATE 1
Now my hosts are active, and I can boot my VMs.
On Thu, Apr 25, 2013 at 1:24 AM, Michael Kublin mkub...@redhat.com wrote:
- Original Message -
From: Yeela Kaplan ykap...@redhat.com
To: Tommy
, August 22, 2021 10:46 PM
To: Tommy Sway
Cc: Eitan Raviv ; users@ovirt.org
Subject: Re: [ovirt-users] Re: what difference between the Cloud-Init Network
Protocol options ?
On Sun, Aug 22, 2021 at 2:05 PM Tommy Sway wrote:
>
> What I want to know is if I use openstack metadata, do
I have read the document you gave me, but can you list what specific
information was deleted by the sealing action?
Thanks!
From: Liran Rotenberg
Sent: Sunday, August 22, 2021 11:33 PM
To: Tommy Sway
Cc: Eitan Raviv ; users@ovirt.org
Subject: Re: [ovirt-users] Re: what
Sent: Sunday, August 22, 2021 4:01 PM
To: Tommy Sway ; Eitan Raviv
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Re: what difference between the Cloud-Init Network
Protocol options ?
On Sun, Aug 22, 2021 at 9:35 AM Tommy Sway wrote:
>
> Any one can help me ?
>
Adding +Eitan Raviv
Th
Thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List
Any one can help me ?
From: users-boun...@ovirt.org On Behalf Of Tommy
Sway
Sent: Saturday, August 14, 2021 6:18 PM
To: users@ovirt.org
Subject: [ovirt-users] Re: what difference between the Cloud-Init Network
Protocol options ?
Any one can help to explain ?
From: users
What is the difference between Openstack MateData and ENI in the cloud-init
Network Protocol option? Or what kind of scenarios do they apply to?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy
There are some options for clone disk for other platform like oVirt.
--clonetype [thin|full]
A thin clone uses copy-on-write (COW) reflinked
clone meaning it is dependent on the base template, but enables rapid
cloning.
Full clone will make
, 2021 5:23 PM
To: Tommy Sway
Cc: users@ovirt.org
Subject: [ovirt-users] Re: what difference between the Cloud-Init Network
Protocol options ?
On Sun, Aug 22, 2021 at 7:56 PM Tommy Sway mailto:sz_cui...@163.com> > wrote:
>
> I have read the document you gave me, but can you list w
Everybody is good!
As you all know, to use the client's network card name in cloud-init, you
must fill in the exact name of the network card interface.
This was easy in version 7 and before, which usually started with EN0.
After version 8, however, the naming conventions for network cards
Thank you!
From: Marcos Sungaila
Sent: Monday, August 23, 2021 11:39 PM
To: Tommy Sway ; 'wodel youchi'
Cc: 'users'
Subject: RE: [ovirt-users] Re: [External] : Re: Is it possible to configure the
wireless network card on the Linux host as the bridge to provide oVirt for use?
Tommy
: Wednesday, August 25, 2021 12:55 AM
To: Liran Rotenberg ; Tommy Sway
Cc: users@ovirt.org
Subject: RE: [External] : [ovirt-users] Re: what difference between the
Cloud-Init Network Protocol options ?
One important thing, you run the virt-sysprep command on the KVM host
indicating the VM name to seal
Ok,thanks!
-Original Message-
From: Marcos Sungaila
Sent: Wednesday, August 25, 2021 1:39 AM
To: Tommy Sway ; 'Liran Rotenberg'
Cc: users@ovirt.org
Subject: RE: [ovirt-users] Re: [External] : Re: what difference between the
Cloud-Init Network Protocol options ?
Once the KVM host
Great!
Thank you!
From: Ales Musil
Sent: Tuesday, August 24, 2021 7:00 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] about the network name rules on CentOS/Redhat 8 and
the cloud-init network interface name
On Tue, Aug 24, 2021 at 12:59 PM Ales Musil
Thank you!
But where to set in on oVirt Platform when I create the VM ?
-Original Message-
From: Marcos Sungaila
Sent: Tuesday, August 24, 2021 9:10 PM
To: Tommy Sway ; users@ovirt.org
Subject: RE: [External] : [ovirt-users] about the network name rules on
CentOS/Redhat 8
Anyone can help me ?
From: users-boun...@ovirt.org On Behalf Of Tommy
Sway
Sent: Thursday, August 26, 2021 12:27 AM
To: users@ovirt.org
Subject: [ovirt-users] about the hugepage setting of the KVM server
Hi:
I am running virtual machines on the KVM servers of oVirt env. The virtual
23, 2021 9:13 PM
To: wodel youchi ; Tommy Sway
Cc: users
Subject: [ovirt-users] Re: [External] : Re: Is it possible to configure the
wireless network card on the Linux host as the bridge to provide oVirt for use?
Hi Tommy,
Two comments for your appreciation:
1st: Technically
page memory and which use plain memory,
and plan for capacity to prevent overflow of memory requirements.
From: Gianluca Cecchi
Sent: Thursday, August 26, 2021 5:07 PM
To: Tommy Sway ; users
Subject: Re: [ovirt-users] Re: about the hugepage setting of the KVM server
On Thu, Aug
Sungaila
Sent: Thursday, August 26, 2021 9:13 PM
To: Tommy Sway ; users@ovirt.org
Subject: RE: [External] : [ovirt-users] Re: about the hugepage setting of
the KVM server
Hi Tommy,
I have no simple answer to your question since I did not need this before,
but some questions may help us
It is best to use a table to list the functional differences in detail.
Thanks.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt
Any one can help to explain ?
From: users-boun...@ovirt.org On Behalf Of Tommy
Sway
Sent: Friday, August 13, 2021 12:55 PM
To: users@ovirt.org
Subject: [ovirt-users] what difference between the Cloud-Init Network
Protocol options ?
What is the difference between Openstack MateData
Thank you!
-Original Message-
From: users-boun...@ovirt.org On Behalf Of Nir Soffer
Sent: Saturday, August 14, 2021 1:31 AM
To: Tommy Sway
Cc: users
Subject: [ovirt-users] Re: about the clonetype of the vm disk when vm is cloned
from template
On Fri, Aug 13, 2021 at 8:06 AM Tommy
Hi:
I am running virtual machines on the KVM servers of oVirt env. The virtual
machine is running database, which needs to set the memory huge page on the
OPERATING system of the virtual machine.
If I need to set the huge page on the VIRTUAL machine, do I also need to set
huge page on the
On the create disk page, there is option to create disk that is from managed
block, I want wo know what's kind of it ? Ceph block device ?
Thanks!
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
you very much!
From: Benny Zlotnik
Sent: Monday, September 13, 2021 7:27 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] what kind of managed block can oVirt manage ?
cinder uses an actual openstack environment setup with cinder, cinderlib does
not require it
On Mon
What's the difference between cender page and Managed Block page ?
If have to connect them through cinderlib,why not put them all under cinder
page ?
From: Benny Zlotnik
Sent: Monday, September 13, 2021 6:14 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] what kind
Great!
Thank you!
From: Benny Zlotnik
Sent: Monday, September 13, 2021 9:20 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] what kind of managed block can oVirt manage ?
cinderlib (Managed Block Storage) does not use openstack at all, we have an
example of how
It seems that the options for cloud-init in the VM portal interface are only
host name and SSH key, other options that can be seen in the administrator
interface are not visible.
Is there a solution to this problem?
Thanks!
___
Users mailing
I see. Thank you.
From: ybard...@redhat.com On Behalf Of Yedidyah Bar David
Sent: Tuesday, September 14, 2021 2:20 PM
To: Tommy Sway
Cc: Aviv Litman ; users ; Shirly Radco
Subject: Re: [ovirt-users] Re: oVirt Monitoring Alerts via Grafana
On Tue, Sep 14, 2021 at 9:12 AM Tommy
Zlotnik
Sent: Monday, September 13, 2021 9:20 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] what kind of managed block can oVirt manage ?
cinderlib (Managed Block Storage) does not use openstack at all, we have an
example of how to add ceph in the feature page[1]
and docs have
Thanks for your article!
My Ovirt system does not show a monitoring portal. How do I integrate Grafana
into my Ovirt portal?
The configuration doesn't seem to have the Grafana option even after the
reinstallation:
[root@olvmm ~]# engine-setup --reconfigure-optional-components
[ INFO ]
: users-boun...@ovirt.org On Behalf Of Benny
Zlotnik
Sent: Tuesday, September 14, 2021 4:09 PM
To: Tommy Sway
Cc: users
Subject: [ovirt-users] Re: what kind of managed block can oVirt manage ?
If it's already enabled there's no need to run it again. I looked at the doc
again now, and it's slightly
, 2021 4:56 PM
To: Tommy Sway
Cc: users
Subject: [ovirt-users] Re: what kind of managed block can oVirt manage ?
I see, if you use 4.3 you will have to add the repos manually on the
ovirt-engine node and vdsm hosts If you did not enable cinderlib in
engine-setup previously you have to do that, yes
interface?
-Original Message-
From: Benny Zlotnik
Sent: Tuesday, September 14, 2021 6:53 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] Re: what kind of managed block can oVirt manage ?
No, the difference is that we setup the required repos (we also installed the
dependencies
much!
-Original Message-
From: Benny Zlotnik
Sent: Tuesday, September 14, 2021 7:19 PM
To: Tommy Sway
Cc: users
Subject: Re: [ovirt-users] Re: what kind of managed block can oVirt manage ?
On Tue, Sep 14, 2021 at 2:11 PM Tommy Sway wrote:
>
> Do you mean that I don'
Thank you very much!
By the way, Is there some item list that show the changes between 4.3 and 4.4 ?
-Original Message-
From: users-boun...@ovirt.org On Behalf Of Benny
Zlotnik
Sent: Tuesday, September 14, 2021 8:08 PM
To: Tommy Sway
Cc: users
Subject: [ovirt-users] Re: what
The oVirt version I'm using is 4.3, and I get an error when I import JSON.
pq: relation"v4_4_latest_configuration_datacenters" does not exist.
From: users-boun...@ovirt.org On Behalf Of Michal
Gutowski
Sent: Wednesday, November 25, 2020 12:26 AM
To: Vrgotic, Marko
Cc: users@ovirt.org
he original document was replaced with 4.3 before the import.
From: matthew.st...@fujitsu.com
Sent: Wednesday, September 15, 2021 3:28 AM
To: Tommy Sway ; 'Michal Gutowski'
; 'Vrgotic, Marko'
Cc: users@ovirt.org
Subject: RE: [ovirt-users] Re: oVirt 4.3 DWH with Grafana
The instructio
Everybody, hi:
I would like to ask, after the configuration of power management on the
host, under what circumstances will work?
That is, when does the engine send a request to the IPMI module to restart
the power supply?
Is it necessary to configure power management modules in the
Thank you!
From: users-boun...@ovirt.org On Behalf Of Marcos
Sungaila
Sent: Friday, September 17, 2021 11:51 PM
To: Tommy Sway ; users@ovirt.org
Subject: [ovirt-users] Re: [External] : about the password of the engine
host and worker KVM hosts
Hi Tommy,
Yes, you can change root
ost in the cluster, so you
need minimum 2 hosts in a cluster before starting setup & test.
Best Regards,
Strahil Nikolov
On Thu, Sep 16, 2021 at 10:32, Tommy Sway
mailto:sz_cui...@163.com> > wrote:
Everybody, hi:
I would like to ask, after the configuration of power management on the host
Thanks.
Is the fence agent in this article a physical KVM server?
From: users-boun...@ovirt.org On Behalf Of Strahil
Nikolov via Users
Sent: Saturday, September 18, 2021 5:45 PM
To: Tommy Sway ; users@ovirt.org
Subject: [ovirt-users] Re: about the power management of the hosts
Thank you!
From: users-boun...@ovirt.org On Behalf Of
matthew.st...@fujitsu.com
Sent: Friday, September 17, 2021 11:45 PM
To: Tommy Sway ; users@ovirt.org
Subject: [ovirt-users] Re: about the password of the engine host and worker
KVM hosts
My understanding, is that OLVM/oVirt use
In product env are Inspur Server.
It should use the IPMI.
From: users-boun...@ovirt.org On Behalf Of Strahil
Nikolov via Users
Sent: Saturday, September 18, 2021 11:06 PM
To: Tommy Sway ; users@ovirt.org
Subject: [ovirt-users] Re: about the power management of the hosts
1 - 100 of 147 matches
Mail list logo