Re: [ovirt-users] HA on Non Responsive
The oVirt show if the phisical host is unresponsive. Virtual Machines appear with a "?" on the status and I cannot start in another machine. I have to mark "host has been restarted" and put in management mode. Atenciosamente, Arthur Melo Linux User #302250 2017-11-28 10:01 GMT-02:00 Michal Skrivanek : > > On 28 Nov 2017, at 06:42, Arthur Melo wrote: > > I had configured, but, I want to migrate before fencing. It's too long to > start the machine again when phisical host not start. > > > then how do you know it’s non responsive and how do you want to make sure > it’s not still running without fencing? > > > Atenciosamente, > Arthur Melo > Linux User #302250 > > > 2017-11-27 18:44 GMT-02:00 Michal Skrivanek : > >> >> > On 27 Nov 2017, at 12:58, Arthur Melo wrote: >> > >> > Hello, there! >> > >> > Is it possible to reduce time to auto migrate machines when node is non >> responsive? >> >> if you configure power management on hosts so the actual state of VMs by >> fencing action it’s going to be faster >> do you have that configured? >> >> Thanks, >> michal >> > >> > Atenciosamente, >> > Arthur Melo >> > Linux User #302250 >> > >> > ___ >> > Users mailing list >> > Users@ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> >> > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] HA on Non Responsive
I had configured, but, I want to migrate before fencing. It's too long to start the machine again when phisical host not start. Atenciosamente, Arthur Melo Linux User #302250 2017-11-27 18:44 GMT-02:00 Michal Skrivanek : > > > On 27 Nov 2017, at 12:58, Arthur Melo wrote: > > > > Hello, there! > > > > Is it possible to reduce time to auto migrate machines when node is non > responsive? > > if you configure power management on hosts so the actual state of VMs by > fencing action it’s going to be faster > do you have that configured? > > Thanks, > michal > > > > Atenciosamente, > > Arthur Melo > > Linux User #302250 > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] HA on Non Responsive
Hello, there! Is it possible to reduce time to auto migrate machines when node is non responsive? Atenciosamente, Arthur Melo Linux User #302250 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Error during delete snapshot
engine.log -- 2017-11-21 10:15:02,536-02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler2) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Correlation ID: 70cc2ffa-2414-4a00-9e24-6b6378408a9d, Job ID: ec197072-7c38-42b6-9aef-99635d4ee135, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Failed to delete snapshot '' for VM 'proxy03'. 2017-11-21 10:15:02,537-02 ERROR [org.ovirt.engine.core.bll.tasks.CommandCallbacksPoller] (DefaultQuartzScheduler2) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] Failed invoking callback end method 'onFailed' for command 'a84519fe-6b23-4084-84a2-b7964cbcde26' with exception 'null', the callback is marked for end method retries 2017-11-21 10:15:12,551-02 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (DefaultQuartzScheduler5) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] Ending command 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand' with failure. 2017-11-21 10:15:12,555-02 INFO [org.ovirt.engine.core.utils.transaction.TransactionSupport] (DefaultQuartzScheduler5) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] transaction rolled back 2017-11-21 10:15:12,567-02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Correlation ID: 70cc2ffa-2414-4a00-9e24-6b6378408a9d, Job ID: ec197072-7c38-42b6-9aef-99635d4ee135, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Failed to delete snapshot '' for VM 'proxy03'. 2017-11-21 10:15:12,567-02 ERROR [org.ovirt.engine.core.bll.tasks.CommandCallbacksPoller] (DefaultQuartzScheduler5) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] Failed invoking callback end method 'onFailed' for command 'a84519fe-6b23-4084-84a2-b7964cbcde26' with exception 'null', the callback is marked for end method retries 2017-11-21 10:15:22,582-02 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (DefaultQuartzScheduler10) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] Ending command 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand' with failure. 2017-11-21 10:15:22,585-02 INFO [org.ovirt.engine.core.utils.transaction.TransactionSupport] (DefaultQuartzScheduler10) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] transaction rolled back 2017-11-21 10:15:22,599-02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler10) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Correlation ID: 70cc2ffa-2414-4a00-9e24-6b6378408a9d, Job ID: ec197072-7c38-42b6-9aef-99635d4ee135, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Failed to delete snapshot '' for VM 'proxy03'. 2017-11-21 10:15:22,600-02 ERROR [org.ovirt.engine.core.bll.tasks.CommandCallbacksPoller] (DefaultQuartzScheduler10) [70cc2ffa-2414-4a00-9e24-6b6378408a9d] Failed invoking callback end method 'onFailed' for command 'a84519fe-6b23-4084-84a2-b7964cbcde26' with exception 'null', the callback is marked for end method retries -- I don't have vdsm log. (I don't know why). Atenciosamente, Arthur Melo Linux User #302250 2017-11-21 10:14 GMT-02:00 Benny Zlotnik : > Please attach engine and vdsm logs > > On Tue, Nov 21, 2017 at 2:11 PM, Arthur Melo wrote: > >> Can someone help me with this error? >> >> >> Failed to delete snapshot '' for VM 'proxy03'. >> >> >> >> Atenciosamente, >> Arthur Melo >> Linux User #302250 >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Error during delete snapshot
Can someone help me with this error? Failed to delete snapshot '' for VM 'proxy03'. Atenciosamente, Arthur Melo Linux User #302250 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CIFS Share
Great answare. Thanks! Atenciosamente, Arthur Melo Linux User #302250 2017-11-12 6:23 GMT-02:00 Yaniv Kaul : > > > On Thu, Nov 9, 2017 at 8:28 PM, Arthur Melo wrote: > >> Is it possible to mount a export share using CIFS? >> > > We generally support any POSIX compliant file system which also support > Direct IO for data domain - I'm not sure if CIFS in general and the > specific implementation you use support both. > If it does, it should work for the data domain - which you can detach and > attach between environments. > Export domain functionality is really done with NFS. > > You could also upload and download disks via your browser and place the > disks on a CIFS share. > Y. > > >> >> Atenciosamente, >> Arthur Melo >> Linux User #302250 >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] CIFS Share
Is it possible to mount a export share using CIFS? Atenciosamente, Arthur Melo Linux User #302250 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] NIC Bonding
Just drag and drop NICs then configure it to active/backup! :) Atenciosamente, Arthur Melo Linux User #302250 2017-11-06 8:15 GMT-02:00 : > Hello! > I'm new(-ish) to oVirt and have a question regarding network. > > I currently use vmware, the hosts have 4 nic each and connected to two > switches in stack(extreme), i have two vSwitch with two nic each setup in > active/standby, with this i don't have to do anything with the physical > switch. > > So how do i do this setup on oVirt so i don't need to configure the > switches? > I know how to bond the cards, but i am afraid of a switchloop, so i just > want to make sure that does not happen. > > Regards > Magnus Isaksson > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Start ovirt-engine in another node.
I got it! I enabled the partition, accessed , mounted it and then retrieved the postgres folder So finnaly I installed in a baremetal server. :D Thanx all!! Atenciosamente, Arthur Melo Linux User #302250 2017-11-05 6:48 GMT-02:00 Fred Rolland : > If the disk is available, maybe you can try to create a new VM and use the > orginal disk. > How did you create the VM originally ? > > On Thu, Nov 2, 2017 at 11:46 PM, Arthur Melo wrote: > >> I have an Equalogic via iSCSI. It's possible to access the images. >> >> Atenciosamente, >> Arthur Melo >> Linux User #302250 >> >> >> 2017-11-02 19:10 GMT-02:00 Yaniv Kaul : >> >>> >>> >>> On Nov 2, 2017 10:10 PM, "Arthur Melo" wrote: >>> >>> The image is in storage. I don't have backup because it was recently >>> migrated. I have a task to make backup system on the next week. >>> I just need to start in another node. >>> >>> >>> We need a bit more details to help... >>> >>> Which storage is that? How do you access it? Can you access the image? >>> Y. >>> >>> >>> I have 5 servers with workload balance enabled and HA. The second node >>> suddenly restarted and I lost control of my cluster. >>> >>> >>> Atenciosamente, >>> Arthur Melo >>> Linux User #302250 >>> >>> >>> 2017-11-02 17:48 GMT-02:00 Yaniv Kaul : >>> >>>> >>>> >>>> On Thu, Nov 2, 2017 at 9:04 PM, Arthur Melo >>>> wrote: >>>> >>>>> Hi Fred! >>>>> >>>>> Thanks for the answer. Isn't hosted-engine. I deployed a virtual >>>>> machine and installed ovirt-engine. >>>>> >>>> >>>> And where is its image? Did you have any backup to the VM disk image or >>>> the oVirt Engine DB and files? >>>> Y. >>>> >>>> >>>>> >>>>> >>>>> Atenciosamente, >>>>> Arthur Melo >>>>> Linux User #302250 >>>>> >>>>> >>>>> 2017-11-02 16:20 GMT-02:00 Fred Rolland : >>>>> >>>>>> Hi, >>>>>> >>>>>> Are you using hosted-engine? >>>>>> Take a look at: >>>>>> https://www.ovirt.org/documentation/self-hosted/chap-Troubleshooting/ >>>>>> Regards, >>>>>> Fred >>>>>> >>>>>> On Thu, Nov 2, 2017 at 7:36 PM, Arthur Melo >>>>>> wrote: >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> My node has died and I need to start ovirt-engine VM in another node. >>>>>>> Can someone save my life? >>>>>>> >>>>>>> >>>>>>> Atenciosamente, >>>>>>> Arthur Melo >>>>>>> Linux User #302250 >>>>>>> >>>>>>> >>>>>>> ___ >>>>>>> Users mailing list >>>>>>> Users@ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> ___ >>>>> Users mailing list >>>>> Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>> >>> >>> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Start ovirt-engine in another node.
I have an Equalogic via iSCSI. It's possible to access the images. Atenciosamente, Arthur Melo Linux User #302250 2017-11-02 19:10 GMT-02:00 Yaniv Kaul : > > > On Nov 2, 2017 10:10 PM, "Arthur Melo" wrote: > > The image is in storage. I don't have backup because it was recently > migrated. I have a task to make backup system on the next week. > I just need to start in another node. > > > We need a bit more details to help... > > Which storage is that? How do you access it? Can you access the image? > Y. > > > I have 5 servers with workload balance enabled and HA. The second node > suddenly restarted and I lost control of my cluster. > > > Atenciosamente, > Arthur Melo > Linux User #302250 > > > 2017-11-02 17:48 GMT-02:00 Yaniv Kaul : > >> >> >> On Thu, Nov 2, 2017 at 9:04 PM, Arthur Melo wrote: >> >>> Hi Fred! >>> >>> Thanks for the answer. Isn't hosted-engine. I deployed a virtual machine >>> and installed ovirt-engine. >>> >> >> And where is its image? Did you have any backup to the VM disk image or >> the oVirt Engine DB and files? >> Y. >> >> >>> >>> >>> Atenciosamente, >>> Arthur Melo >>> Linux User #302250 >>> >>> >>> 2017-11-02 16:20 GMT-02:00 Fred Rolland : >>> >>>> Hi, >>>> >>>> Are you using hosted-engine? >>>> Take a look at: >>>> https://www.ovirt.org/documentation/self-hosted/chap-Troubleshooting/ >>>> Regards, >>>> Fred >>>> >>>> On Thu, Nov 2, 2017 at 7:36 PM, Arthur Melo >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> My node has died and I need to start ovirt-engine VM in another node. >>>>> Can someone save my life? >>>>> >>>>> >>>>> Atenciosamente, >>>>> Arthur Melo >>>>> Linux User #302250 >>>>> >>>>> >>>>> ___ >>>>> Users mailing list >>>>> Users@ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>> >>>>> >>>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Start ovirt-engine in another node.
The image is in storage. I don't have backup because it was recently migrated. I have a task to make backup system on the next week. I just need to start in another node. I have 5 servers with workload balance enabled and HA. The second node suddenly restarted and I lost control of my cluster. Atenciosamente, Arthur Melo Linux User #302250 2017-11-02 17:48 GMT-02:00 Yaniv Kaul : > > > On Thu, Nov 2, 2017 at 9:04 PM, Arthur Melo wrote: > >> Hi Fred! >> >> Thanks for the answer. Isn't hosted-engine. I deployed a virtual machine >> and installed ovirt-engine. >> > > And where is its image? Did you have any backup to the VM disk image or > the oVirt Engine DB and files? > Y. > > >> >> >> Atenciosamente, >> Arthur Melo >> Linux User #302250 >> >> >> 2017-11-02 16:20 GMT-02:00 Fred Rolland : >> >>> Hi, >>> >>> Are you using hosted-engine? >>> Take a look at: >>> https://www.ovirt.org/documentation/self-hosted/chap-Troubleshooting/ >>> Regards, >>> Fred >>> >>> On Thu, Nov 2, 2017 at 7:36 PM, Arthur Melo wrote: >>> >>>> Hello, >>>> >>>> My node has died and I need to start ovirt-engine VM in another node. >>>> Can someone save my life? >>>> >>>> >>>> Atenciosamente, >>>> Arthur Melo >>>> Linux User #302250 >>>> >>>> >>>> ___ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Start ovirt-engine in another node.
Hi Fred! Thanks for the answer. Isn't hosted-engine. I deployed a virtual machine and installed ovirt-engine. Atenciosamente, Arthur Melo Linux User #302250 2017-11-02 16:20 GMT-02:00 Fred Rolland : > Hi, > > Are you using hosted-engine? > Take a look at: > https://www.ovirt.org/documentation/self-hosted/chap-Troubleshooting/ > Regards, > Fred > > On Thu, Nov 2, 2017 at 7:36 PM, Arthur Melo wrote: > >> Hello, >> >> My node has died and I need to start ovirt-engine VM in another node. >> Can someone save my life? >> >> >> Atenciosamente, >> Arthur Melo >> Linux User #302250 >> >> >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Start ovirt-engine in another node.
Hello, My node has died and I need to start ovirt-engine VM in another node. Can someone save my life? Atenciosamente, Arthur Melo Linux User #302250 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users