[ovirt-users] Ovirt setup

2019-05-15 Thread Bryan Sockel
Hi,

I am getting an error attempting to install ovirt on a pair of bonded nics.  
The error that we are getting is Cannot acquire nic/bridge address.

We typically run all our servers with an active/backup setup. 
--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se



--
IMPORTANT!
This message has been scanned for viruses and phishing links.
However, it is your responsibility to evaluate the links and attachments you 
choose to click.
If you are uncertain, we always try to help.
Greetings helpd...@actnet.se


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/7XOEFVT6GO2EL3G2GKBXWNWVN3GGCVVH/


[ovirt-users] Bad Volume Specification

2019-03-27 Thread Bryan Sockel
Having an issue with starting one of my VM's.  Looks like there was a 
problem with an auto generated snapshot on the VM.  The snapshot file is 
missing:


VDSM-Tool Output:


 image:52f31c3a-25ac-4930-8e67-105945dd42b5
 - 461e1747-3a59-4abc-ac6a-2013ec7858d3
   status: OK, voltype: INTERNAL, format: RAW, legality: LEGAL, 
type: PREALLOCATED, capacity: 53687091200, truesize: 53687091200
 - fe5fb4a4-8b3a-4bad-8f03-9dd179ac8397
   status: OK, voltype: INTERNAL, format: COW, legality: LEGAL, 
type: SPARSE, capacity: 53687091200, truesize: 6576668672
 - a01d662f-cf33-4c86-b0ba-8bddc6d25dfd
   status: ILLEGAL, voltype: LEAF, format: COW, legality: 
ILLEGAL, type: SPARSE, capacity: 53687091200, truesize: 3221225472
   


lvs -o+lv_tags |grep 52f31c3a-25ac-4930-8e67-105945dd42b5
Couldn't find device with uuid 5UNXpR-SmSR-KqA2-swpe-kcQi-X7tt-7B5wRz.
  461e1747-3a59-4abc-ac6a-2013ec7858d3 8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d 
-wi-a-   50.00g 
IU_52f31c3a-25ac-4930-8e67-105945dd42b5,MD_43,PU_----
  a01d662f-cf33-4c86-b0ba-8bddc6d25dfd 8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d 
-wi---3.00g 
IU_52f31c3a-25ac-4930-8e67-105945dd42b5,MD_46,PU_fe5fb4a4-8b3a-4bad-8f03-9dd179ac8397
  fe5fb4a4-8b3a-4bad-8f03-9dd179ac8397 8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d 
-wi-a-6.12g 
IU_52f31c3a-25ac-4930-8e67-105945dd42b5,MD_45,PU_461e1747-3a59-4abc-ac6a-2013ec7858d3





qemu-img info 
/dev/8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d/a01d662f-cf33-4c86-b0ba-8bddc6d25dfd
qemu-img: Could not open 
'/dev/8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d/a01d662f-cf33-4c86-b0ba-8bddc6d25dfd':
 
Could not open 
'/dev/8dfaac42-32fc-4e23-b5cb-e5c2c3c56c9d/a01d662f-cf33-4c86-b0ba-8bddc6d25dfd':
 
No such file or directory



What is the best way to remove the snapshot from the vm (PSQL statement to 
delete the entry from the database)?
Thank You,


Bryan Sockel
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2QX42FAHKHTPJN4H6YG7CMEZYMTXZBKQ/


[ovirt-users] illegal Disk state

2019-03-25 Thread Bryan Sockel
Hi,


Had an issue with a vm over the weekend and i am now unable to start the vm. 
 Both Disks show up in an illegal state when i attempt to launch the vm.  
Any help would be greatly appreciated.  Below are the portions of vdsm.log 
and engine.log files.  


VM is stored on an ISCSI Lun.


VDSM.Log - 
https://docs.google.com/document/d/1RWxka-EtiPHF9KWjvZrVCuV90tVKRZtOefvkXQp34BQ/edit?usp=sharing


Engine.Log - 
https://docs.google.com/document/d/1wyGrlxemI_hPgUeVlCibi0AYCO7NL_HVyXv_ICooxUU/edit?usp=sharing



Thank You,


Bryan Sockel
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IMHZGYAR4PRUWQVTZOU3PZMOZDWV6UWW/


[ovirt-users] OVN Deployment

2019-03-06 Thread Bryan Sockel
Hi,


I am looking to implement OVN with in my setup, but could use some guidance 
on the implementation.  As part of the implementation i am planning on 
moving from engine being installed on a physical server to running as a VM 
with in my environment.


I do not need to retain any historical data.  The plan would be to import 
the vm's into a new deployment of oVirt after getting everything setup.  
Currently i have a single host i plan on using for the initial deployment, 
but as vm's are moved over, i will be adding additional hosts.


With the deployment of oVirt 4.3.x the ovn provider is installed correctly.  
Is there a problem with installing the OVN Controller on the Hosted Engine?


Has any one found a good guide for setting up and deploying ovn in an oVirt 
hosted-engine environment?



Thank You,

Bryan Sockel___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/CPBLH5E6KTUIOHE6I4GQN25S3LD5W5VP/


[ovirt-users] Network Performance Issues

2019-02-07 Thread Bryan Sockel
Hi,
 
I currently have a 4 node ovirt cluster running.  Each node is configured with 
an active passive network setup, with each link being 10 GB.  After looking 
over my performance metrics collected via observium.  I am noticing the network 
traffic rarely exceeds 100 MB.  I am noticing this across all four of my 
servers and my 2 storage arrays that are also connected via the same 10 GB 
links.
 
What is the best way to trouble shoot this problem? 
 
Thanks
 
 ___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/P4KJR6F4QPQRN3XFULCHV7ZDU77LJLEE/


[ovirt-users] Re: Corrupted Disk Images

2018-07-23 Thread Bryan Sockel
Thanks Oliver,

Here is more details on the configuration.  Server is part of  Gluster 3 
Replica Arbiter 1 server.  The two primary servers are both running DDR-4 
Multi Bit ECC Memory

Each Server is a Del Power Edge 630 running with 
6x32 GB Memory
Perc H730P with 2 GB on board cache.
Raid 10 Array 8 Drives
Read Ahead
Write Through - 512K Stripe
Arbiter server is nothing special, just a server i have laying around.


Thank You,

Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233e: bryan.soc...@mdaemon.com

MDaemon Technologies
Simple Secure Email

Visit us on Facebook | LinkedIn | YouTube

Sent using the MDaemon Messaging Server

From: "Oliver Riesener (oliver.riese...@hs-bremen.de)" 

To: Bryan Sockel 
Cc: "users@ovirt.org" 
Date: Fri, 20 Jul 2018 21:41:51 +0200
Subject: [ovirt-users] Re: Corrupted Disk Images

Hi Bryan,

i expect a hardware problem.

Have all your servers ECC ram ?

In the past I had a PC (without ECC RAM) and without ovirt,
which regularly produced a defective data block when transferring
an 8GB gzip file with rsync. The error position in file was randomly, but
the defective stored block on disc has always only the first 128 bytes 
scrambled.

You see, something like this can happen without any messages or anything 
like that.
I didn't investigate further whether the cause was the network card, the RAM 
or 
the drive path or the switch port. But it was clearly reproducible!

my 2 cent.


Am 20.07.2018 um 15:38 schrieb Bryan Sockel :

Hi,

Over the past few weeks i have had a number of Windows VM Disk start showing 
up as corrupted.  I Attempt to boot into recover mode and run the normal 
recover tools (chkdsk, sfc /scannow, etc.) Unable to repair with status 50.

Looking through Ovirt, i do not see any thing in the logs.  VM is Running 
off a gluster replica 3 volume.  The corruption does not seem to be isolated 
to one specific gluster volume.  I have also seen corruption with an NFS 
Volume.  Issue seemed to start after moving from a Centos 7 Install, to a 
Ovirt Node image.  

I have mainly seen corruption with Windows 10 Images, but a couple of 
2003/2012 server OS's as well. 

Where would be the best place to start looking at why the VM HD's are 
getting corrupted?



Thank You,

Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233e: bryan.soc...@mdaemon.com

MDaemon Technologies
Simple Secure Email

Visit us on Facebook | LinkedIn | YouTube

Sent using the MDaemon Messaging Server
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G7LZS7V2KHYCZH6LNRHLMN6YVEZLMJBM/___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KHJZ5GQJBKMKTIHIKRFELZR4ODQ3GLFE/


[ovirt-users] Corrupted Disk Images

2018-07-20 Thread Bryan Sockel
Hi,

Over the past few weeks i have had a number of Windows VM Disk start showing 
up as corrupted.  I Attempt to boot into recover mode and run the normal 
recover tools (chkdsk, sfc /scannow, etc.) Unable to repair with status 50.

Looking through Ovirt, i do not see any thing in the logs.  VM is Running 
off a gluster replica 3 volume.  The corruption does not seem to be isolated 
to one specific gluster volume.  I have also seen corruption with an NFS 
Volume.  Issue seemed to start after moving from a Centos 7 Install, to a 
Ovirt Node image.  

I have mainly seen corruption with Windows 10 Images, but a couple of 
2003/2012 server OS's as well. 

Where would be the best place to start looking at why the VM HD's are 
getting corrupted?



Thank You,

Bryan Sockel
Systems Administrator
o: 817-601-3222 ext: 233e: bryan.soc...@mdaemon.com

MDaemon Technologies
Simple Secure Email

Visit us on Facebook | LinkedIn | YouTube

Sent using the MDaemon Messaging Server___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G7LZS7V2KHYCZH6LNRHLMN6YVEZLMJBM/


[ovirt-users] Re: Bad volume specification

2018-05-28 Thread Bryan Sockel
Permissions all seem to be correct, path is accessible, can run other vm's 
off the same storage domain.

Thank You,

From: "Oliver Riesener (oliver.riese...@hs-bremen.de)" 

To: Bryan Sockel 
Cc: "users@ovirt.org" 
Date: Sun, 27 May 2018 15:38:32 +0200
Subject: [ovirt-users] Re: Bad volume specification

Hi,

check what wrong with your **PATH**:

permissions, lvm, device-mapper, NFS, iSCSI, etc.

Am 27.05.2018 um 15:28 schrieb Bryan Sockel :

 'path': 
'/rhev/data-center/9e7d643c-592d-11e8-82eb-005056b41d15/2b79768f-a329-4eab-81e0-120a81ac8906/images/ec7a3258-7a99-4813-aa7d-dceb727a1975/8f4ddee4-68b3-48e9-be27-0231557f5218'___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/G2CSVVM5BPSBMCS4VBC35IHNZUMQJW3D/


[ovirt-users] Bad volume specification

2018-05-27 Thread Bryan Sockel
Hi,

I am having to rebuild my ovirt instance for a couple of reasons.  I have 
setup a temporary ovirt portal to migrate my setup to while i rebuild my 
production portal.  

I have run int a couple of VM's that will no longer start.  

Everything that i am seeing is identical to this article - 
https://access.redhat.com/solutions/2423391

VM devel-build is down with error. Exit message: Bad volume specification 
{'serial': 'ec7a3258-7a99-4813-aa7d-dceb727a1975', 'index': 0, 'iface': 
'virtio', 'apparentsize': '1835008', 'specParams': {}, 'cache': 'none', 
'imageID': 'ec7a3258-7a99-4813-aa7d-dceb727a1975', 'truesize': '1777664', 
'type': 'disk', 'domainID': '2b79768f-a329-4eab-81e0-120a81ac8906', 
'reqsize': '0', 'format': 'cow', 'poolID': 
'9e7d643c-592d-11e8-82eb-005056b41d15', 'device': 'disk', 'path': 
'/rhev/data-center/9e7d643c-592d-11e8-82eb-005056b41d15/2b79768f-a329-4eab-81e0-120a81ac8906/images/ec7a3258-7a99-4813-aa7d-dceb727a1975/8f4ddee4-68b3-48e9-be27-0231557f5218',
 
'propagateErrors': 'off', 'name': 'vda', 'bootOrder': '1', 'volumeID': 
'8f4ddee4-68b3-48e9-be27-0231557f5218', 'diskType': 'file', 'alias': 
'ua-ec7a3258-7a99-4813-aa7d-dceb727a1975', 'discard': False}.


Currently running version 4.2.3.5-1

Is there anyway to recover the image, or even just be able to mount the 
drive to another vm to extract data.

Thank You


___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org


[ovirt-users] Unable to connect to vm's via Console

2018-05-15 Thread Bryan Sockel
Not entirely sure what happened, but I am no longer able to connect to the 
console on any of my vm’s.  I receive the error “No CA Found!”.  
 
 ___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org


[ovirt-users] Moving Templatexs

2018-03-30 Thread Bryan Sockel
Hi,

We are in the process of re-doing one of our storage domains.  As part of the 
process I needed to relocate my templates over to a temporary domain.  To do 
this, I copy the disk from one domain to another.  In the past I have been able 
to go into disk’s and remove the template disk from the storage domain I no 
longer want it on.  Now when I go in to storage -> Disks ->  -> Storage and select the storage domain I wish to remove it from, the 
box is grayed out.
 
Currently running Ovirt version 4.2.2.5-1.el7.centos
 

Thank You, 

Bryan Sockel___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Authentication

2018-03-22 Thread Bryan Sockel
Hey Guys, 
 
Was working on switching my authentication over to TLS, and during the process 
I have lost the Internal Authentication option on my drop down list.  Need to 
Know how to add it back it back to the list of drop down items.
 
Thanks
 ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] NIC Bonding

2017-11-16 Thread Bryan Sockel
Understood.  Our typical server deployment is primary network link to one 
switch and back up link to a second switch.  This allows for my network 
admin to do switch maintenance with out any down time.  So in our ovirt 
deployment we have bonded link for one server going to switch 1 and on 
server 2 we have a bonded link going to switch 2.  We have to manually put 
the server in maintenance mode before he could do any switch maintenance.  
If there was an actual switch outage, we would have to wait for the system 
to restart the HA VM's on the other server.

I know there are ways on the switch side that we can make both switches 
appear as a single switch and possibly create a bond across switches, but 
that is not something we have implemented.

Thanks
Bryan Sockel
-Original Message-
From: Edward Haas <eh...@redhat.com>
To: Petr Horacek <phora...@redhat.com>
Cc: Bryan Sockel <bryan.soc...@altn.com>, users <users@ovirt.org>
Date: Thu, 16 Nov 2017 09:10:39 +0200
Subject: Re: [ovirt-users] NIC Bonding



On Wed, Nov 15, 2017 at 1:52 PM, Petr Horacek <phora...@redhat.com> wrote:
Hello Bryan,

I'm afraid it is not possible with oVirt. You can only attach NICs to a 
bonding via the way Arthur suggested.

Regards,
Petr

2017-11-09 16:41 GMT+02:00 Bryan Sockel <bryan.soc...@altn.com>:
I have a similar setup i am trying to achieve, but i would like to create 2 
bonds to increase the bandwith and then configure 1 bond as a backup to the 
primary.  Is there some way to do this?

I would argue that such a setup is problematic. The bond link goes down only 
when all its slaves are down, therefore, if you loose one slave, the BW is 
decreased and the backup will not take over.
Using 3 or 4 slaves bond can allow you to get both increased BW and 
redundancy.

Thanks,
Edy.



Bryan Sockel

Sent using Alt-N's own MDaemon Messaging Server
Get to know the Alt-N family by liking us on Facebook!


-Original Message-
From: Arthur Melo <art...@afabrica.net>
To: magnus.isaks...@ilw.se
Cc: users <users@ovirt.org>
Date: Mon, 6 Nov 2017 10:18:03 -0200
Subject: Re: [ovirt-users] NIC Bonding

Just drag and drop NICs then configure it to active/backup! :)

Atenciosamente,
Arthur Melo
Linux User #302250

 
2017-11-06 8:15 GMT-02:00 <magnus.isaks...@ilw.se>:
Hello!
I'm new(-ish) to oVirt and have a question regarding network.
I currently use vmware, the hosts have 4 nic each and connected to two 
switches in stack(extreme), i have two vSwitch with two nic each setup in 
active/standby, with this i don't have to do anything with the physical 
switch.
So how do i do this setup on oVirt so i don't need to configure the 
switches?
I know how to bond the cards, but i am afraid of a switchloop, so i just 
want to make sure that does not happen.

Regards
Magnus Isaksson

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

2017-11-15 Thread Bryan Sockel
Ok Thanks, for some reason i was thinking it was the other way around.

Bryan Sockel
-Original Message-
From: Kasturi Narra <kna...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>, users 
<users@ovirt.org>
Date: Wed, 15 Nov 2017 11:48:31 +0530
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

Hi Bryan,

 In your output if you see the -drive file=gluster:/// 
this means that vm disk drives are being accessed using libgfapi. 

If it is fuse then you would have seen something like 
"file=/rhev/data-center/59f2df7e-0388-00ea-02c2-017b/67d7d3cc-df3f-4d07-b6f3-944982c5677c/images/8e6f96d3-2ed4-4c56-87d1-3a994284e683/9bf5a54e-d72d-4b1f-8ab1-0a84eb987fdd"

Thanks
kasturi

On Tue, Nov 14, 2017 at 8:37 PM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Hrm, not sure what i am doing wrong then, does not seem to be working for 
me.  I am not using the hosted engine, but a direct install on a physical 
server.  I thought i have enabled support for libgfapi with this command:

# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 3.6
LibgfApiSupported: false version: 4.0
LibgfApiSupported: true version: 4.1

restarted the engine, shutdown the vm completely and started it back up a 
short time later.

I am using this command to check:
 ps ax | grep qemu | grep 'file=gluster\|file=/rhev'

Output is 
 file=gluster://10.20.102.181/gl-vm12/

Thanks
Bryan
-Original Message-
From: Kasturi Narra <kna...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>, users 
<users@ovirt.org>
Date: Tue, 14 Nov 2017 12:56:49 +0530
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

yes, it  does work with 4.1.7.6 version

On Tue, Nov 14, 2017 at 4:49 AM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Is libgfapi supposed to be working in 4.1.7.6?
Bryan 
-Original Message-
From: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>
To: users@ovirt.org
Date: Thu, 9 Nov 2017 09:35:01 +0100
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2
 
Hi again,
OK, tried to stop all the vms, except the engine, set engine-config -s 
LibgfApiSupported=true (for 4.2 only) and restarted the engine.
When I tried restarting the VMs they are still not using gfapi, so it does 
not seem to help.
Cheers,

Alessandro


Il 09/11/17 09:12, Alessandro De Salvo ha scritto:

Hi,
where should I enable gfapi via the UI?
The only command I tried was engine-config -s LibgfApiSupported=true but the 
result is what is shown in my output below, so it’s set to true for v4.2. 
Is it enough?
I’ll try restarting the engine. Is it really needed to stop all the VMs 
and restart them all? Of course this is a test setup and I can do it, but 
for production clusters in the future it may be a problem.
Thanks,

   Alessandro

Il giorno 09 nov 2017, alle ore 07:23, Kasturi Narra <kna...@redhat.com> ha 
scritto:

Hi ,

The procedure to enable gfapi is below.

1) stop all the vms running
2) Enable gfapi via UI or using engine-config command
3) Restart ovirt-engine service
4) start the vms.

Hope you have not missed any !!

Thanks
kasturi 

On Wed, Nov 8, 2017 at 11:58 PM, Alessandro De Salvo 
<alessandro.desa...@roma1.infn.it> wrote:
Hi,

I'm using the latest 4.2 beta release and want to try the gfapi access, but 
I'm currently failing to use it.

My test setup has an external glusterfs cluster v3.12, not managed by oVirt.

The compatibility flag is correctly showing gfapi should be enabled with 
4.2:

# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 3.6
LibgfApiSupported: false version: 4.0
LibgfApiSupported: false version: 4.1
LibgfApiSupported: true version: 4.2

The data center and cluster have the 4.2 compatibility flags as well.

However, when starting a VM with a disk on gluster I can still see the disk 
is mounted via fuse.

Any clue of what I'm still missing?

Thanks,


   Alessandro

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Issue migrating hard drive to new vm store

2017-11-14 Thread Bryan Sockel
Having an issue moving a hard disk from one vm data store new a newly 
created gluster data store.  I can shut down the machine and copy the hard 
drive, detach the old hard drive and attach the new hard drive, but i would 
prefer to keep the vm on line when moving the disk.

I have attached a portion of the vdsm.log file.



Thanks
Bryan 
2017-11-14 09:43:58,824-06 INFO  
[org.ovirt.engine.core.bll.storage.disk.MoveDisksCommand] (default task-61) 
[bae5243a-a7a1-4f13-8d5e-04132f98b35d] Running command: MoveDisksCommand 
internal: false. Entities affected :  ID: 57b69fdf-93dd-444c-977b-8803fa83507b 
Type: DiskAction group CONFIGURE_DISK_STORAGE with role type USER
2017-11-14 09:43:58,911-06 INFO  
[org.ovirt.engine.core.bll.storage.lsm.LiveMigrateVmDisksCommand] (default 
task-61) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] Lock Acquired to object 
'EngineLock:{exclusiveLocks='[57b69fdf-93dd-444c-977b-8803fa83507b=DISK]', 
sharedLocks='[7c48c7f7-31d4-4627-a26f-6a239bf92f21=VM]'}'
2017-11-14 09:43:59,061-06 INFO  
[org.ovirt.engine.core.bll.storage.lsm.LiveMigrateVmDisksCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
Running command: LiveMigrateVmDisksCommand internal: false. Entities affected : 
 ID: 57b69fdf-93dd-444c-977b-8803fa83507b Type: DiskAction group 
DISK_LIVE_STORAGE_MIGRATION with role type USER
2017-11-14 09:43:59,136-06 INFO  
[org.ovirt.engine.core.bll.snapshots.CreateAllSnapshotsFromVmCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
Running command: CreateAllSnapshotsFromVmCommand internal: true. Entities 
affected :  ID: 7c48c7f7-31d4-4627-a26f-6a239bf92f21 Type: VMAction group 
MANIPULATE_VM_SNAPSHOTS with role type USER
2017-11-14 09:43:59,162-06 INFO  
[org.ovirt.engine.core.bll.snapshots.CreateSnapshotCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
Running command: CreateSnapshotCommand internal: true. Entities affected :  ID: 
---- Type: Storage
2017-11-14 09:43:59,187-06 INFO  
[org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
START, CreateSnapshotVDSCommand( 
CreateSnapshotVDSCommandParameters:{runAsync='true', 
storagePoolId='02abeab8-fac8-41a9-bc2d-7fb0eaac0e07', 
ignoreFailoverLimit='false', 
storageDomainId='0e201616-a896-4c4a-90e6-791933ea5393', 
imageGroupId='57b69fdf-93dd-444c-977b-8803fa83507b', 
imageSizeInBytes='107374182400', volumeFormat='COW', 
newImageId='0028c34f-1117-4b06-b9d9-83be9bf263cf', imageType='Sparse', 
newImageDescription='', imageInitialSizeInBytes='0', 
imageId='d2c2e7a9-ae5b-4481-9d8c-185ab5cd8c14', 
sourceImageGroupId='57b69fdf-93dd-444c-977b-8803fa83507b'}), log id: 7d8623d3
2017-11-14 09:43:59,187-06 INFO  
[org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] -- 
executeIrsBrokerCommand: calling 'createVolume' with two new parameters: 
description and UUID
2017-11-14 09:44:00,274-06 INFO  
[org.ovirt.engine.core.vdsbroker.irsbroker.CreateSnapshotVDSCommand] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
FINISH, CreateSnapshotVDSCommand, return: 0028c34f-1117-4b06-b9d9-83be9bf263cf, 
log id: 7d8623d3
2017-11-14 09:44:00,279-06 INFO  
[org.ovirt.engine.core.bll.tasks.CommandAsyncTask] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
CommandAsyncTask::Adding CommandMultiAsyncTasks object for command 
'edece02c-623b-482e-a5fa-7caad2d15a9f'
2017-11-14 09:44:00,280-06 INFO  
[org.ovirt.engine.core.bll.CommandMultiAsyncTasks] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
CommandMultiAsyncTasks::attachTask: Attaching task 
'ef8cc0ca-ef62-4a92-9564-457d0fa82584' to command 
'edece02c-623b-482e-a5fa-7caad2d15a9f'.
2017-11-14 09:44:00,298-06 INFO  
[org.ovirt.engine.core.bll.tasks.AsyncTaskManager] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
Adding task 'ef8cc0ca-ef62-4a92-9564-457d0fa82584' (Parent Command 
'CreateSnapshot', Parameters Type 
'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters'), polling hasn't 
started yet..
2017-11-14 09:44:00,382-06 INFO  
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 
EVENT_ID: USER_CREATE_SNAPSHOT(45), Correlation ID: 
bae5243a-a7a1-4f13-8d5e-04132f98b35d, Job ID: 
b2c0c8f8-57d1-4012-ab4c-e0b7544036a7, Call Stack: null, Custom ID: null, Custom 
Event ID: -1, Message: Snapshot 'Auto-generated for Live Storage Migration' 
creation for VM 'ansible.altn.int' was initiated by admin@internal-authz.
2017-11-14 09:44:00,383-06 INFO  [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] 
(org.ovirt.thread.pool-6-thread-22) [bae5243a-a7a1-4f13-8d5e-04132f98b35d] 

Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

2017-11-14 Thread Bryan Sockel
Hrm, not sure what i am doing wrong then, does not seem to be working for 
me.  I am not using the hosted engine, but a direct install on a physical 
server.  I thought i have enabled support for libgfapi with this command:

# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 3.6
LibgfApiSupported: false version: 4.0
LibgfApiSupported: true version: 4.1

restarted the engine, shutdown the vm completely and started it back up a 
short time later.

I am using this command to check:
 ps ax | grep qemu | grep 'file=gluster\|file=/rhev'

Output is 
 file=gluster://10.20.102.181/gl-vm12/

Thanks
Bryan 
-Original Message-
From: Kasturi Narra <kna...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>, users 
<users@ovirt.org>
Date: Tue, 14 Nov 2017 12:56:49 +0530
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

yes, it  does work with 4.1.7.6 version

On Tue, Nov 14, 2017 at 4:49 AM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Is libgfapi supposed to be working in 4.1.7.6?
Bryan 
-Original Message-
From: Alessandro De Salvo <alessandro.desa...@roma1.infn.it>
To: users@ovirt.org
Date: Thu, 9 Nov 2017 09:35:01 +0100
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2
 
Hi again,
OK, tried to stop all the vms, except the engine, set engine-config -s 
LibgfApiSupported=true (for 4.2 only) and restarted the engine.
When I tried restarting the VMs they are still not using gfapi, so it does 
not seem to help.
Cheers,

Alessandro


Il 09/11/17 09:12, Alessandro De Salvo ha scritto:

Hi,
where should I enable gfapi via the UI?
The only command I tried was engine-config -s LibgfApiSupported=true but the 
result is what is shown in my output below, so it’s set to true for v4.2. 
Is it enough?
I’ll try restarting the engine. Is it really needed to stop all the VMs 
and restart them all? Of course this is a test setup and I can do it, but 
for production clusters in the future it may be a problem.
Thanks,

   Alessandro

Il giorno 09 nov 2017, alle ore 07:23, Kasturi Narra <kna...@redhat.com> ha 
scritto:

Hi ,

The procedure to enable gfapi is below.

1) stop all the vms running
2) Enable gfapi via UI or using engine-config command
3) Restart ovirt-engine service
4) start the vms.

Hope you have not missed any !!

Thanks
kasturi 

On Wed, Nov 8, 2017 at 11:58 PM, Alessandro De Salvo 
<alessandro.desa...@roma1.infn.it> wrote:
Hi,

I'm using the latest 4.2 beta release and want to try the gfapi access, but 
I'm currently failing to use it.

My test setup has an external glusterfs cluster v3.12, not managed by oVirt.

The compatibility flag is correctly showing gfapi should be enabled with 
4.2:

# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 3.6
LibgfApiSupported: false version: 4.0
LibgfApiSupported: false version: 4.1
LibgfApiSupported: true version: 4.2

The data center and cluster have the 4.2 compatibility flags as well.

However, when starting a VM with a disk on gluster I can still see the disk 
is mounted via fuse.

Any clue of what I'm still missing?

Thanks,


   Alessandro

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

2017-11-13 Thread Bryan Sockel
Is libgfapi supposed to be working in 4.1.7.6?
Bryan 
-Original Message-
From: Alessandro De Salvo 
To: users@ovirt.org
Date: Thu, 9 Nov 2017 09:35:01 +0100
Subject: Re: [ovirt-users] Enabling libgfapi disk access with oVirt 4.2

Hi again,

OK, tried to stop all the vms, except the engine, set engine-config -s 
LibgfApiSupported=true (for 4.2 only) and restarted the engine.

When I tried restarting the VMs they are still not using gfapi, so it does 
not seem to help.

Cheers,



Alessandro




Il 09/11/17 09:12, Alessandro De Salvo ha scritto:

Hi,
where should I enable gfapi via the UI?
The only command I tried was engine-config -s LibgfApiSupported=true but the 
result is what is shown in my output below, so it’s set to true for v4.2. 
Is it enough?
I’ll try restarting the engine. Is it really needed to stop all the VMs 
and restart them all? Of course this is a test setup and I can do it, but 
for production clusters in the future it may be a problem.
Thanks,

   Alessandro

Il giorno 09 nov 2017, alle ore 07:23, Kasturi Narra  ha 
scritto:

Hi ,

The procedure to enable gfapi is below.

1) stop all the vms running
2) Enable gfapi via UI or using engine-config command
3) Restart ovirt-engine service
4) start the vms.

Hope you have not missed any !!

Thanks
kasturi 

On Wed, Nov 8, 2017 at 11:58 PM, Alessandro De Salvo 
 wrote:
Hi,

I'm using the latest 4.2 beta release and want to try the gfapi access, but 
I'm currently failing to use it.

My test setup has an external glusterfs cluster v3.12, not managed by oVirt.

The compatibility flag is correctly showing gfapi should be enabled with 
4.2:

# engine-config -g LibgfApiSupported
LibgfApiSupported: false version: 3.6
LibgfApiSupported: false version: 4.0
LibgfApiSupported: false version: 4.1
LibgfApiSupported: true version: 4.2

The data center and cluster have the 4.2 compatibility flags as well.

However, when starting a VM with a disk on gluster I can still see the disk 
is mounted via fuse.

Any clue of what I'm still missing?

Thanks,


   Alessandro

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] NIC Bonding

2017-11-09 Thread Bryan Sockel
I have a similar setup i am trying to achieve, but i would like to create 2 
bonds to increase the bandwith and then configure 1 bond as a backup to the 
primary.  Is there some way to do this?


Bryan Sockel

Sent using Alt-N's own MDaemon Messaging Server
Get to know the Alt-N family by liking us on Facebook!


-Original Message-
From: Arthur Melo <art...@afabrica.net>
To: magnus.isaks...@ilw.se
Cc: users <users@ovirt.org>
Date: Mon, 6 Nov 2017 10:18:03 -0200
Subject: Re: [ovirt-users] NIC Bonding

Just drag and drop NICs then configure it to active/backup! :)

Atenciosamente,
Arthur Melo
Linux User #302250


2017-11-06 8:15 GMT-02:00 <magnus.isaks...@ilw.se>:
Hello!
I'm new(-ish) to oVirt and have a question regarding network.

I currently use vmware, the hosts have 4 nic each and connected to two 
switches in stack(extreme), i have two vSwitch with two nic each setup in 
active/standby, with this i don't have to do anything with the physical 
switch.

So how do i do this setup on oVirt so i don't need to configure the 
switches?
I know how to bond the cards, but i am afraid of a switchloop, so i just 
want to make sure that does not happen.

Regards
Magnus Isaksson


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Storage Performance

2017-10-25 Thread Bryan Sockel
Have a question in regards to storage performance.  I have a gluster replica 
3 volume that we are testing for performance.  In my current configuration 
is 1 server has 16X1.2TB( 10K 2.5 Inch) drives configured in Raid 10 with a 
256k stripe.  My 2nd server is configured with 4X6TB (3.5 Inch Drives) 
configured Raid 10 with a 256k stripe.  Each server is configured with 802.3 
Bond (4X1GB) network links.  Each server is configured with write-back on 
the raid controller.

I am seeing a lot of network usage (solid 3 Gbps) when i perform file copies 
on the vm attached to that gluster volume,  But i see spikes on the disk io 
when watching the dashboard through the cockpit interface.  I spikes are up 
to 1.5 Gbps, but i would say the average through put is maybe 256 Mbps.

Is this to be expected, or should it be a solid activity in the graphs for 
disk IO.  Is it better to use a 256K stripe or a 512 strip on the hardware 
raid configuration?

Eventually i plan on having the hardware match up for better performance.


Thanks

Bryan___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Gluster Performance

2017-10-04 Thread Bryan Sockel
Is there any performance loss from your  if your gluster replica 3 servers 
are not all the same configuration?


Server 1 - Primary 
16 X 1.2 TB 10k Drives - Raid 10 - Stripe 256k (2.5 Drives)
1 CPU - Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
64 GB Memory

Server 2 - Replica
8 X 6 TB 7.5 RPM Drives - Raid 10 - Trip 512 (3.5)
1 CPU - Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
16 GB Memory

Server 3 - Arbiter (Also Virtual machine node)
2 X 1.2 TB 10k Drives Raid 10 
2 CPU - Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
192 GB Memory

Thanks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] User Portal and Multi-Monitor Support

2017-06-08 Thread Bryan Sockel
Is there a way to enable multi monitor support when launching a RDP Session 
through the user Portal?


Bryan Sockel
Systems Administrator
Alt-N Technologies | Grapevine, TX
Office 817.601.3222 x233

Sent using Alt-N's own MDaemon Messaging Server
Get to know the Alt-N family by liking us on Facebook!
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] VM/Template copy issue

2017-06-02 Thread Bryan Sockel
This happening to a number  of vm's. All vm's are running and can be
stopped and re started.  We can read and write data within the vm.

All vms are currently running on a single node gluster file system.  I
am attempting to migrate to a replica 3 gluster file system when i
exprience these issues.  The problem always seems to happen when
finalizing the move or copy.

If it makes a difference the gluster storage we are coping to and from
are dedicated storage servers.


 Original message 
From: Maor Lipchuk <mlipc...@redhat.com> 
Date: 6/2/17 5:29 PM (GMT-06:00) 
To: Bryan Sockel <bryan.soc...@altn.com> 
Cc: users@ovirt.org 
Subject: Re: [ovirt-users] VM/Template copy issue 

  _  

>From : Maor Lipchuk [mlipc...@redhat.com]
To : Bryan Sockel [bryan.soc...@altn.com]
Cc : users@ovirt.org [users@ovirt.org]
Date : Friday, June 2 2017 17:27:32
Hi Bryan,

It seems like there was an error from qemu-img while reading sector
143654878 .
 the Image copy (conversion) failed with low level qemu-img failure:

CopyImageError: low level Image copy failed:
("cmd=['/usr/bin/taskset', '--cpu-list', '0-31', '/usr/bin/nice',
'-n', '19', '/usr/bin/ionice', '-c', '3', '/usr/bin/qemu-img',
'convert', '-p', '-t', 'none', '-T', 'none', '-f', 'raw',
u'/rhev/data-center/d776b537-16f2-4543-bd96-9b4cba69e247/e371d380-7194-4
950-b901-5f2aed5dfb35/images/9959c6e4-1fb7-455b-ad5e-8b9e2324a0ab/3f4e18
3b-7957-4bee-9153-9d967491f882',
'-O', 'raw',
u'/rhev/data-center/mnt/glusterSD/vs-host-colo-1-gluster.altn.int:_deskt
op-vdi1/f927ceb8-91d2-41bd-ba42-dc795395b6d0/images/9959c6e4-1fb7-455b-a
d5e-8b9e2324a0ab/3f4e183b-7957-4bee-9153-9d967491f882'],
ecode=1, stdout=, stderr=qemu-img: error while reading sector
143654878: No data available\n, message=None",)

Can you verify those disks are indeed valid? Can you IO to them while
attaching them to a running VM?

On Tue, May 30, 2017 at 9:10 PM, Bryan Sockel  wrote:
>
> Hi,
>
> I am trying to rebuild my ovirt environment after having to juggle
some
> hardware around.  I am moving from hosted engine environment into a
engine
> install on a dedicated server.  I have two data centers in my setup
and each
> DC has a non-routable vlan dedicated to storage.
>
> As i rebuild my setup i am trying to clean up my storage
configuration.  I
> am attempting to copy vm's and templates to a dedicated gluster setup.
> However  each time i attempt to copy a template or move a vm, the
operation
> fails.  The failure always happens when it is finalizing the copy.
>
> The operation does not happen with all vm's, but seems to happen
mostly with
> vm's created from with in Ovirt, and not imported from vmware.
>
>
> I have attached the logs from where i was trying to copy to templates
to a
> new Gluster Filesystem
>
> Thanks
> Bryan
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Storage domain does not exist

2017-06-01 Thread Bryan Sockel
Hey,

I am having an issue moving/copying vm's and templates around in my ovirt 
environment. I am getting the following error in my VDSM Logs:

"2017-06-01 01:01:54,425-0500 ERROR (jsonrpc/5) [storage.Dispatcher] 
{'status': {'message': "Storage domain does not exist: 
(u'97258ca6-5acd-40c7-a812-b8cac02a9621',)", 'code': 358}} (dispatcher:77)"

I believe this started when i destroyed a data domain instead of removing 
the domain correctly.  I have since then rebuilt my ovirt environment, 
importing my gluster domains back into my new setup.

I believe the issue is related to some stale metadata on my gluster storage 
servers somewhere but do not know how to remove it or where it exists.

I found these two posts that seem to deal with the same problem i am seeing.

https://access.redhat.com/solutions/180623
and 
https://access.redhat.com/solutions/2355061

Currently running 2 dedicated gluster servers and 2 Ovirt VM hosts servers, 
one is acting as an arbiter for my replica 3 gluster file system.

All hosts are running CentOS Linux release 7.3.1611 (Core) 

Thanks___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Network Performance

2017-05-10 Thread Bryan Sockel
About what i would expect to see:

[  3] local 10.20.101.207 port 43688 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec   979 MBytes   820 Mbits/sec


-Original Message-
From: Juan Pablo <pablo.localh...@gmail.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: users <users@ovirt.org>
Date: Wed, 10 May 2017 16:26:44 -0300
Subject: Re: [ovirt-users] Network Performance

ok, so those numbers are not bad. just to check, can you please verify same 
test from x server to vm? (server different than host vm please ).

regards,
JP

2017-05-10 16:21 GMT-03:00 Bryan Sockel <bryan.soc...@altn.com>:
Hi Juan,

Currently we are seeing the lag/delay in the VM's. The slowness comes from 
when we access applications from the network vs. locally.  For instance 
Putty opens quickly when run locally, but when run from the network it may 
take a minute or so to launch.

I am watching the Nload graph on the physical server and not seeing 
any/minimal traffic go out on the vlan the vm is running on.

Currently my bonding options are setup as follows:

BONDING_OPTS='mode=4 miimon=1'

I will be changing the options to:
mode=4 miimon=100 xmit_hash_policy=2



Iperf Host to host before Bonding Options change
[  4] local 10.20.101.181 port 5001 connected with 10.20.101.183 port 54892
[ ID] Interval   Transfer Bandwidth
[  4]  0.0-10.0 sec  1.09 GBytes   935 Mbits/sec

Host to vm Before Bonding Options Change

[  3] local 10.20.101.207 port 33142 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  23.6 GBytes  20.2 Gbits/sec

Host to Gluster Servers

[  5] local 10.20.101.181 port 5001 connected with 10.20.101.185 port 51588
[  5]  0.0-10.0 sec  1.07 GBytes   915 Mbits/sec
[  4] local 10.20.101.181 port 5001 connected with 10.20.101.187 port 45548
[  4]  0.0-10.0 sec   946 MBytes   790 Mbits/sec


After Bonding Changes:

Host to Host
[  3] local 10.20.101.183 port 57656 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  1.04 GBytes   897 Mbits/sec

Host to VM

[  3] local 10.20.101.207 port 43686 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  26.2 GBytes  22.5 Gbits/sec

Host to Storage
[  3] local 10.20.101.185 port 51590 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  1.02 GBytes   876 Mbits/sec


VM was running on the same host i was testing the performance against.


After further testing and investigation i have noticed that Kaspersky AV 
maybe the main factor.  

Thanks


-Original Message-
From: Juan Pablo <pablo.localh...@gmail.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Wed, 10 May 2017 14:14:13 -0300
Subject: Re: [ovirt-users] Network Performance

Bryan, could you please elaborate your setup? do you see lag on your 
virt-host or in your VM's? what have you tried so far to test? can you 
please run:
"iperf -s" on your server (or where do you see lagg)
and "iperf -c $serveripaddress" replace $serveripaddress with your interface 
IP.
and paste your output?
can you also descrie if this is a layer2 or layer 3 network?

regards,
JP

2017-05-10 13:05 GMT-03:00 Bryan Sockel <bryan.soc...@altn.com>:
I am doing some testing with our current ovirt setup and i am seeing some 
lagging going on when i attempt to launch or access files from a network 
share, or even run windows updates.  

My current setup is 4 X 1 GB Nic bond with multiple Vlan's attached.  Server 
usage is currently low. I have also not setup any additional Network QoS and 
everything else is set to default.




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Network Performance

2017-05-10 Thread Bryan Sockel
Hi Juan,

Currently we are seeing the lag/delay in the VM's. The slowness comes from 
when we access applications from the network vs. locally.  For instance 
Putty opens quickly when run locally, but when run from the network it may 
take a minute or so to launch.

I am watching the Nload graph on the physical server and not seeing 
any/minimal traffic go out on the vlan the vm is running on.

Currently my bonding options are setup as follows:

BONDING_OPTS='mode=4 miimon=1'

I will be changing the options to:
mode=4 miimon=100 xmit_hash_policy=2



Iperf Host to host before Bonding Options change
[  4] local 10.20.101.181 port 5001 connected with 10.20.101.183 port 54892
[ ID] Interval   Transfer Bandwidth
[  4]  0.0-10.0 sec  1.09 GBytes   935 Mbits/sec

Host to vm Before Bonding Options Change

[  3] local 10.20.101.207 port 33142 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  23.6 GBytes  20.2 Gbits/sec

Host to Gluster Servers

[  5] local 10.20.101.181 port 5001 connected with 10.20.101.185 port 51588
[  5]  0.0-10.0 sec  1.07 GBytes   915 Mbits/sec
[  4] local 10.20.101.181 port 5001 connected with 10.20.101.187 port 45548
[  4]  0.0-10.0 sec   946 MBytes   790 Mbits/sec


After Bonding Changes:

Host to Host
[  3] local 10.20.101.183 port 57656 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  1.04 GBytes   897 Mbits/sec

Host to VM

[  3] local 10.20.101.207 port 43686 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  26.2 GBytes  22.5 Gbits/sec

Host to Storage
[  3] local 10.20.101.185 port 51590 connected with 10.20.101.181 port 5001
[ ID] Interval   Transfer Bandwidth
[  3]  0.0-10.0 sec  1.02 GBytes   876 Mbits/sec


VM was running on the same host i was testing the performance against.


After further testing and investigation i have noticed that Kaspersky AV 
maybe the main factor.  

Thanks


-Original Message-
From: Juan Pablo <pablo.localh...@gmail.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Wed, 10 May 2017 14:14:13 -0300
Subject: Re: [ovirt-users] Network Performance

Bryan, could you please elaborate your setup? do you see lag on your 
virt-host or in your VM's? what have you tried so far to test? can you 
please run:
"iperf -s" on your server (or where do you see lagg)
and "iperf -c $serveripaddress" replace $serveripaddress with your interface 
IP.
and paste your output?
can you also descrie if this is a layer2 or layer 3 network?

regards,
JP

2017-05-10 13:05 GMT-03:00 Bryan Sockel <bryan.soc...@altn.com>:
I am doing some testing with our current ovirt setup and i am seeing some 
lagging going on when i attempt to launch or access files from a network 
share, or even run windows updates.  

My current setup is 4 X 1 GB Nic bond with multiple Vlan's attached.  Server 
usage is currently low. I have also not setup any additional Network QoS and 
everything else is set to default.




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Network Performance

2017-05-10 Thread Bryan Sockel
I am doing some testing with our current ovirt setup and i am seeing some 
lagging going on when i attempt to launch or access files from a network 
share, or even run windows updates.  

My current setup is 4 X 1 GB Nic bond with multiple Vlan's attached.  Server 
usage is currently low. I have also not setup any additional Network QoS and 
everything else is set to default.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] VM Template Error

2017-05-04 Thread Bryan Sockel
I have been moving around my storage setup, and this storage domain does not 
exist in my environment anymore.  Not sure if this if this VM was created on 
this storage domain and then moved.  

I am attempting to create a template on a storage domain that does currently 
exist in my environment.  How would i remove the reference to this storage 
domain so it is not used?


-Original Message-
From: Shahar Havivi <shav...@redhat.com>
To: Michal Skrivanek <michal.skriva...@redhat.com>
Cc: Bryan Sockel <bryan.soc...@altn.com>, users <users@ovirt.org>
Date: Thu, 4 May 2017 08:19:34 +0300
Subject: Re: [ovirt-users] VM Template Error

According to the log the the storage domain (where the disk is stored is not 
exists)
StorageDomainDoesNotExist: Storage domain does not exist: 
(u'2de6ad97-1f33-41e5-b021-bacec14ce6e4',)

Does all the storage domain active in your data center?
Did you move the disk or remove and added a different storage domain?

On Wed, May 3, 2017 at 8:30 PM, Michal Skrivanek 
<michal.skriva...@redhat.com> wrote:

On 3 May 2017, at 16:09, Bryan Sockel <bryan.soc...@altn.com> wrote:

Hi.  the vm does exist and is bootable.  The vm only has one disk and it is 
enabled.  

yes, but the template’s copy of that disk somehow can’t be created. 
Perhaps share more of the vdsm logs to see why the image copy failed

Thanks,
michal



Thanks


-Original Message-
From: Shahar Havivi <shav...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Wed, 3 May 2017 09:05:34 +0300
Subject: Re: [ovirt-users] VM Template Error

its looks like vdsm complain that the image is not exists.
can you run the VM with no errors? (if the VM have more then one disk make 
sure that its exists and accessible).

if all good please attach the full vdsm and engine log.

 Shahar.

On Tue, May 2, 2017 at 6:29 PM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Hi,

Having an issue a template from a VM's.

I am getting the following errors: 
engine.log 
2017-05-02 09:40:10,059-05 INFO  
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(default task-24) [2ef2fce] EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation 
ID: 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
Message: Creation of Template test from VM Windows-10-Template was initiated 
by admin@internal-authz.

2017-05-02 09:48:43,059-05 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(org.ovirt.thread.pool-7-thread-20) [] EVENT_ID: 
USER_ADD_VM_TEMPLATE_FINISHED_FAILURE(52), Correlation ID: 
176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
Message: Failed to complete creation of Template test from VM 
Windows-10-Template.

Events Log
ID 10803 - VDSM command DeleteImageGroupVDS failed: Image does not exist in 
domain: u'image=6aa525ad-e7f1-432b-959a-2223f7e77083, 
domain=e371d380-7194-4950-b901-5f2aed5dfb35'
ID 10802 - VDSM vm-host-colo-2 command HSMGetAllTasksStatusesVDS failed: low 
level Image copy failed

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] VM Template Error

2017-05-02 Thread Bryan Sockel
Hi,

Having an issue a template from a VM's.

I am getting the following errors: 
engine.log 
2017-05-02 09:40:10,059-05 INFO  
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(default task-24) [2ef2fce] EVENT_ID: USER_ADD_VM_TEMPLATE(48), Correlation 
ID: 176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
Message: Creation of Template test from VM Windows-10-Template was initiated 
by admin@internal-authz.

2017-05-02 09:48:43,059-05 ERROR 
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] 
(org.ovirt.thread.pool-7-thread-20) [] EVENT_ID: 
USER_ADD_VM_TEMPLATE_FINISHED_FAILURE(52), Correlation ID: 
176fdfa7-0467-48f5-9ecc-901e86768c28, Job ID: 
fed9a848-1971-495a-a391-be1fa4a67908, Call Stack: null, Custom Event ID: -1, 
Message: Failed to complete creation of Template test from VM 
Windows-10-Template.

Events Log
ID 10803 - VDSM command DeleteImageGroupVDS failed: Image does not exist in 
domain: u'image=6aa525ad-e7f1-432b-959a-2223f7e77083, 
domain=e371d380-7194-4950-b901-5f2aed5dfb35'
ID 10802 - VDSM vm-host-colo-2 command HSMGetAllTasksStatusesVDS failed: low 
level Image copy failed___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] LACP Bonding issue

2017-04-20 Thread Bryan Sockel
That was my next thought, wanted to see if there was another way before
I got to that point.


 Original message 
From: Derek Atkins <de...@ihtfp.com> 
Date: 4/20/17 8:12 PM (GMT-06:00) 
To: Bryan Sockel <bryan.soc...@altn.com> 
Cc: Chris Adams <c...@cmadams.net>, users@ovirt.org 
Subject: Re: [ovirt-users] LACP Bonding issue 

  _  

>From : Derek Atkins [de...@ihtfp.com]
To : Bryan Sockel [bryan.soc...@altn.com]
Cc : Chris Adams [c...@cmadams.net], users@ovirt.org [users@ovirt.org]
Date : Thursday, April 20 2017 20:11:46
For what it's worth I set up my bond0 manually on CentOS before
installing
ovirt hosted engine and the ovirtmgmt bridge "took over" from bond0..
But
it appears to still be working.  At least I've not noticed links being
down, and "ifconfig" shows decent amount of traffic on both eno1 and
eno2.

Maybe wipe, re-install, configure it manually, and then install ovirt?

-derek

On Thu, April 20, 2017 8:58 pm, Bryan Sockel wrote:
> We checked the port groups, and servers are cabled correctly.
>
> After server is rebooted, em1 is the only interface passing traffic.
> Other 3 nics sitting idle.  We can down each port on the switch and
> confirm it is down on the server.
>
>
> I am pretty sure it is related to the bridge that was created to pass
> vm-host-altn traffic when the appliance was first installed.
>
>
>
>  Original message 
> From: Chris Adams 
> Date: 4/20/17 5:40 PM (GMT-06:00)
> To: users@ovirt.org
> Subject: Re: [ovirt-users] LACP Bonding issue
>
>   _
>
> From : Chris Adams [c...@cmadams.net]
> To : users@ovirt.org [users@ovirt.org]
> Date : Thursday, April 20 2017 17:40:25
> Once upon a time, Bryan Sockel  said:
>> It seems that is some disconnect between my network bridge, the bond
> and my
>> interfaces.  I would like to some how get my bond to use all 4
> interfaces.
>> On reboot, it always seems to reset consistently to EM1.
>
> Are you sure the switch side is all the same LACP group?  Sounds like
> one port may accidentally be in a separate group, and that happens to
be
> em1.
>
> You might try swapping wires between em1 and another port and reboot
and
> see which ports come up - if all but the port with the wire formerly
in
> em1 come up, it points to the switch config.
>
> --
> Chris Adams
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>


-- 
   Derek Atkins 617-623-3745
   de...@ihtfp.com www.ihtfp.com
   Computer and Internet Security Consultant

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] LACP Bonding issue

2017-04-20 Thread Bryan Sockel
We checked the port groups, and servers are cabled correctly.

After server is rebooted, em1 is the only interface passing traffic.
Other 3 nics sitting idle.  We can down each port on the switch and
confirm it is down on the server.


I am pretty sure it is related to the bridge that was created to pass
vm-host-altn traffic when the appliance was first installed.



 Original message 
From: Chris Adams <c...@cmadams.net> 
Date: 4/20/17 5:40 PM (GMT-06:00) 
To: users@ovirt.org 
Subject: Re: [ovirt-users] LACP Bonding issue 

  _  

>From : Chris Adams [c...@cmadams.net]
To : users@ovirt.org [users@ovirt.org]
Date : Thursday, April 20 2017 17:40:25
Once upon a time, Bryan Sockel  said:
> It seems that is some disconnect between my network bridge, the bond
and my 
> interfaces.  I would like to some how get my bond to use all 4
interfaces.  
> On reboot, it always seems to reset consistently to EM1.

Are you sure the switch side is all the same LACP group?  Sounds like
one port may accidentally be in a separate group, and that happens to be
em1.

You might try swapping wires between em1 and another port and reboot and
see which ports come up - if all but the port with the wire formerly in
em1 come up, it points to the switch config.

-- 
Chris Adams 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] LACP Bonding issue

2017-04-20 Thread Bryan Sockel

After further testing we can either get EM1 running on the bond or EM2 - EM4 
running in the bond, but not EM1-EM4.  We are running the Hosted Engine 
Appliance in our setup.  In order to install the appliance, i have to point 
it to a physical nic during the install process.  The install process 
creates the network bridge ovirtmgmt which is tied to interface EM1 on both 
servers.  After i finished setting up the appliance, and both of my hosts, i 
went in and created my bond so i could configure LACP.  

It seems that is some disconnect between my network bridge, the bond and my 
interfaces.  I would like to some how get my bond to use all 4 interfaces.  
On reboot, it always seems to reset consistently to EM1.

-Original Message-
From: Konstantin Shalygin <k0...@k0ste.ru>
To: users@ovirt.org, Bryan Sockel <bryan.soc...@altn.com>
Date: Thu, 20 Apr 2017 23:43:15 +0700
Subject: Re: Re: [ovirt-users] LACP Bonding issue

You should configure your LAG with this options (custom mode on oVirt):

mode=4 miimon=100 xmit_hash_policy=2 lacp_rate=1

An tell to your network admin configure switch:
"Give me lacp timeout short with channel-group mode active. Also set 
port-channel load-balance src-dst-mac-ip (or src-dst-ip\src-dst-mac)".

You also need to understand that LACP balancing works 'per flow'. You can 
take 2 hosts and run "iperf -c xxx.xxx.xxx.xxx -i 0.1 -d",
and on one phy interface you should see 1Gb RX, and on another phy interface 
1Gb TX.

Hi,

I discovered an issue with my LACP configuration and i am having trouble 
figuring it out.  I am running 2 Dell Powered 610's with 4 broadcomm nics.  
I am trying to bond them together, however only one of the nics goes active 
no mater how much traffic i push across the links.

I have spoken to my network admin, and says that the switch ports are 
configured and can only see one active link on the switch.

Thanks
Bryan___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] LACP Bonding issue

2017-04-20 Thread Bryan Sockel

Hi,

I discovered an issue with my LACP configuration and i am having trouble 
figuring it out.  I am running 2 Dell Powered 610's with 4 broadcomm nics.  
I am trying to bond them together, however only one of the nics goes active 
no mater how much traffic i push across the links.

I have spoken to my network admin, and says that the switch ports are 
configured and can only see one active link on the switch.

Thanks
Bryan

Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: f4:8e:38:c5:fc:a8
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 1
Actor Key: 9
Partner Key: 20
Partner Mac Address: a4:6c:2a:e5:30:00

Slave Interface: em1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:a8
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: f4:8e:38:c5:fc:a8
port key: 9
port priority: 255
port number: 1
port state: 61
details partner lacp pdu:
system priority: 8192
system mac address: a4:6c:2a:e5:30:00
oper key: 20
port priority: 32768
port number: 25
port state: 61

Slave Interface: em2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:a9
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: churned
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
system priority: 65535
system mac address: f4:8e:38:c5:fc:a8
port key: 9
port priority: 255
port number: 2
port state: 5
details partner lacp pdu:
system priority: 32768
system mac address: a4:6c:2a:e5:30:00
oper key: 20
port priority: 32768
port number: 73
port state: 5

Slave Interface: em3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:aa
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: churned
Partner Churn State: churned
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
system priority: 65535
system mac address: f4:8e:38:c5:fc:a8
port key: 9
port priority: 255
port number: 3
port state: 5
details partner lacp pdu:
system priority: 32768
system mac address: a4:6c:2a:e5:30:00
oper key: 20
port priority: 32768
port number: 26
port state: 5

Slave Interface: em4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:ab
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: churned
Partner Churn State: churned
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
oper key: 20
port priority: 32768
port number: 73
port state: 5

Slave Interface: em3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:aa
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: churned
Partner Churn State: churned
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
system priority: 65535
system mac address: f4:8e:38:c5:fc:a8
port key: 9
port priority: 255
port number: 3
port state: 5
details partner lacp pdu:
system priority: 32768
system mac address: a4:6c:2a:e5:30:00
oper key: 20
port priority: 32768
port number: 26
port state: 5

Slave Interface: em4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: f4:8e:38:c5:fc:ab
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: churned
Partner Churn State: churned
Actor Churned Count: 1
Partner Churned Count: 1
details actor lacp pdu:
system priority: 65535
system mac address: f4:8e:38:c5:fc:a8
port key: 9
port priority: 255
port number: 4
port state: 5
details partner lacp pdu:
system priority: 32768
system mac address: a4:6c:2a:e5:30:00
oper key: 20
port priority: 32768
port number: 74
port state: 5
Apr 20 10:51:04 vm-host-colo-2 systemd: Stopping LSB: Bring up/down 
networking...
Apr 20 10:51:04 vm-host-colo-2 kernel: DMZ: port 1(bond0.10) entered disabled 
state
Apr 20 10:51:04 vm-host-colo-2 network: Shutting down interface DMZ:  [  OK  ]
Apr 20 10:51:04 vm-host-colo-2 kernel: Internal-Dev: port 1(bond0.30) entered 
disabled state
Apr 20 10:51:04 vm-host-colo-2 network: Shutting down interface Internal-Dev:  
[  OK  ]
Apr 20 10:51:05 vm-host-colo-2 kernel: Lab: port 1(bond0.40) entered disabled 
state
Apr 20 10:51:05 vm-host-colo-2 network: Shutting down interface Lab:  [  OK  ]
Apr 20 10:51:05 vm-host-colo-2 kernel: 

Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?

2017-04-19 Thread Bryan Sockel
Thank you for the information, i did check my servers this morning, in total 
i have 4 servers configured as part of my ovirt deployment, two 
virtualization servers and 2 gluster servers, with one of the virtualization 
being the arbiter for my gluster replicated storage.

>From what i can see on my 2 dedicated gluster boxes i see traffic going out 
over multiple links.  On both of my virtualization hosts i am seeing all 
traffic go out via em1, and no traffic going out over the other interfaces.  
All four interfaces are configured in a single bond as 802.3ad on both hosts 
with my logical networks attached to the bond.


-Original Message-
From: Yaniv Kaul <yk...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: users <users@ovirt.org>
Date: Wed, 19 Apr 2017 10:41:40 +0300
Subject: Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?



On Tue, Apr 18, 2017 at 9:57 PM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Was reading over this post to the group about storage options.  I am more of 
a windows guy as appose to a linux guy, but am learning quickly and had a 
question.  You said that LACP will not provide extra band with (Especially 
with NFS).  Does the same hold true with GlusterFS.  We are currently using 
GlusterFS for the file replication piece.  Does Glusterfs take advantage of 
any multipathing?

Thanks


I'd expect Gluster to take advantage of LACP, as it has replication to 
multiple peers (as opposed to NFS). See[1].
Y.

[1] 
https://gluster.readthedocs.io/en/latest/Administrator%20Guide/Network%20Configurations%20Techniques/
 


-Original Message-
From: Yaniv Kaul <yk...@redhat.com>
To: Charles Tassell <ctass...@gmail.com>
Cc: users <users@ovirt.org>
Date: Sun, 26 Mar 2017 10:40:00 +0300
Subject: Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?



On Sat, Mar 25, 2017 at 9:20 AM, Charles Tassell <ctass...@gmail.com> wrote:
Hi Everyone,

  I'm about to setup an oVirt cluster with two hosts hitting a Linux storage 
server.  Since the Linux box can provide the storage in pretty much any 
form, I'm wondering which option is "best." Our primary focus is on 
reliability, with performance being a close second.  Since we will only be 
using a single storage server I was thinking NFS would probably beat out 
GlusterFS, and that NFSv4 would be a better choice than NFSv3.  I had 
assumed that that iSCSI would be better performance wise, but from what I'm 
seeing online that might not be the case.

NFS 4.2 is better than NFS 3 in the sense that you'll get DISCARD support, 
which is nice.
Gluster probably requires 3 servers.
In most cases, I don't think people see the difference in performance 
between NFS and iSCSI. The theory is that block storage is faster, but in 
practice, most don't get to those limits where it matters really.


  Our servers will be using a 1G network backbone for regular traffic and a 
dedicated 10G backbone with LACP for redundancy and extra bandwidth for 
storage traffic if that makes a difference.

LCAP many times (especially on NFS) does not provide extra bandwidth, as the 
(single) NFS connection tends to be sticky to a single physical link.
It's one of the reasons I personally prefer iSCSI with multipathing.


  I'll probably try to do some performance benchmarks with 2-3 options, but 
the reliability issue is a little harder to test for.  Has anyone had any 
particularly bad experiences with a particular storage option?  We have been 
using iSCSI with a Dell MD3x00 SAN and have run into a bunch of issues with 
the multipath setup, but that won't be a problem with the new SAN since it's 
only got a single controller interface.

A single controller is not very reliable. If reliability is your primary 
concern, I suggest ensuring there is no single point of failure - or at 
least you are aware of all of them (does the storage server have redundant 
power supply? to two power sources? Of course in some scenarios it's an 
overkill and perhaps not practical, but you should be aware of your weak 
spots).

I'd stick with what you are most comfortable managing - creating, backing 
up, extending, verifying health, etc.
Y.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?

2017-04-18 Thread Bryan Sockel
Was reading over this post to the group about storage options.  I am more of 
a windows guy as appose to a linux guy, but am learning quickly and had a 
question.  You said that LACP will not provide extra band with (Especially 
with NFS).  Does the same hold true with GlusterFS.  We are currently using 
GlusterFS for the file replication piece.  Does Glusterfs take advantage of 
any multipathing?

Thanks


-Original Message-
From: Yaniv Kaul 
To: Charles Tassell 
Cc: users 
Date: Sun, 26 Mar 2017 10:40:00 +0300
Subject: Re: [ovirt-users] Best Storage Option: iSCSI/NFS/GlusterFS?



On Sat, Mar 25, 2017 at 9:20 AM, Charles Tassell  wrote:
Hi Everyone,

  I'm about to setup an oVirt cluster with two hosts hitting a Linux storage 
server.  Since the Linux box can provide the storage in pretty much any 
form, I'm wondering which option is "best." Our primary focus is on 
reliability, with performance being a close second.  Since we will only be 
using a single storage server I was thinking NFS would probably beat out 
GlusterFS, and that NFSv4 would be a better choice than NFSv3.  I had 
assumed that that iSCSI would be better performance wise, but from what I'm 
seeing online that might not be the case.

NFS 4.2 is better than NFS 3 in the sense that you'll get DISCARD support, 
which is nice.
Gluster probably requires 3 servers.
In most cases, I don't think people see the difference in performance 
between NFS and iSCSI. The theory is that block storage is faster, but in 
practice, most don't get to those limits where it matters really.


  Our servers will be using a 1G network backbone for regular traffic and a 
dedicated 10G backbone with LACP for redundancy and extra bandwidth for 
storage traffic if that makes a difference.

LCAP many times (especially on NFS) does not provide extra bandwidth, as the 
(single) NFS connection tends to be sticky to a single physical link.
It's one of the reasons I personally prefer iSCSI with multipathing.


  I'll probably try to do some performance benchmarks with 2-3 options, but 
the reliability issue is a little harder to test for.  Has anyone had any 
particularly bad experiences with a particular storage option?  We have been 
using iSCSI with a Dell MD3x00 SAN and have run into a bunch of issues with 
the multipath setup, but that won't be a problem with the new SAN since it's 
only got a single controller interface.

A single controller is not very reliable. If reliability is your primary 
concern, I suggest ensuring there is no single point of failure - or at 
least you are aware of all of them (does the storage server have redundant 
power supply? to two power sources? Of course in some scenarios it's an 
overkill and perhaps not practical, but you should be aware of your weak 
spots).

I'd stick with what you are most comfortable managing - creating, backing 
up, extending, verifying health, etc.
Y.



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Setting up hosted engine appliance on a bonded interface

2017-03-28 Thread Bryan Sockel
I was able to get around this by dropping one of the nics out of the bond, 
and have the switch port reconfigured for a standard vlan, ran the setup and 
reconfigured network and re establish the bond.

-Original Message-
From: Doug Ingham <dou...@gmail.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Tue, 28 Mar 2017 11:44:35 -0400
Subject: Re: [ovirt-users] Setting up hosted engine appliance on a bonded 
interface

Hi Bryan,

On 23 March 2017 at 23:54, Bryan Sockel <bryan.soc...@altn.com> wrote:

Hi,

I am attempting to deploy an appliance to a bonded interface, and i getting 
this error when it attempts to setup the bridge:


[ ERROR ] Failed to execute stage 'Misc configuration': Failed to setup 
networks {'ovirtmgmt': {'bonding': 'bond0', 'ipaddr': u'10.20.101.181', 
'netmask': u'255.255.255.0', 'defaultRoute': True, 'gateway': 
u'10.20.101.1'}}. Error code: "-32603" message: "Attempt to call function: 
> with 
arguments: ({u'ovirtmgmt': {u'bonding': u'bond0', u'ipaddr': 
u'10.20.101.181', u'netmask': u'255.255.255.0', u'defaultRoute': True, 
u'gateway': u'10.20.101.1'}}, {}, {u'connectivityCheck': False}) error: 
'NoneType' object is not iterable"


Is it possible to deploy an appliance to a network bond?  My Network guy has 
configured my ports in the switch so i can connect via bonded links.  
however, if the interfaces are not bonded, it will suspend the links.

With LACP & bonding mode 4 (the type of bonding you configure with a 
switch), you *can* configure the link to be suspended if one of the member 
ports are down, however that would only be desired in very specific edge 
cases. I see no reason why you should be using such a configuration.
LACP is usually used to provide both aggregated bandwidth & port redundancy. 
If one of the member ports fail, then the link is maintained with the 
aggregated bandwidth of the remaining links. You don't even need the bond 
configured on both sides, if you only configure it on one side, then the 
ports fall back to individual/non-aggregated mode (although some 
manufacturers only permit that in passive mode, not active mode).

If your bond is configured as you say, then I suggest you ask your network 
guy to reconfigure the bond - you lose link redundancy at absolutely no 
benefit.




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Doug___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] engine-image/iso-uploader issues

2017-03-28 Thread Bryan Sockel
Guys, 

I have recently setup a new Ovirt environment, and i have created a gluster 
share for both my Export and ISO Domains. Every time i try and use either 
command, i get an access denied error.  Here is the verbose output from the 
image import:

DEBUG: API Vendor(ovirt.org)API Version(4.1.0)
DEBUG: id=deceadaa-bfce-4d63-8726-0128be8b3a27 
address=vs-host-colo-2-gluster path=/export
DEBUG: local NFS mount point is /tmp/tmpne0s1q
DEBUG: NFS mount command (/bin/mount -t nfs -o rw,sync,soft 
vs-host-colo-2-gluster:/export /tmp/tmpne0s1q)
DEBUG: /bin/mount -t nfs -o rw,sync,soft vs-host-colo-2-gluster:/export 
/tmp/tmpne0s1q
DEBUG: _cmds(['/bin/mount', '-t', 'nfs', '-o', 'rw,sync,soft', 
'vs-host-colo-2-gluster:/export', '/tmp/tmpne0s1q'])
DEBUG: returncode(32)
DEBUG: STDOUT()
DEBUG: STDERR(mount.nfs: access denied by server while mounting 
vs-host-colo-2-gluster:/export
)
ERROR: mount.nfs: access denied by server while mounting 
vs-host-colo-2-gluster:/export
DEBUG: /bin/umount -t nfs -f  /tmp/tmpne0s1q
DEBUG: /bin/umount -t nfs -f  /tmp/tmpne0s1q
DEBUG: _cmds(['/bin/umount', '-t', 'nfs', '-f', '/tmp/tmpne0s1q'])
DEBUG: returncode(32)
DEBUG: STDOUT()
DEBUG: STDERR(umount: /tmp/tmpne0s1q: not mounted
)
DEBUG: umount: /tmp/tmpne0s1q: not mounted


Volumes where created as follows:
gluster volume create iso 
vs-host-colo-2-gluster.altn.int:/gluster/iso/brick1
gluster volume set iso storage.owner-uid 36 && gluster volume set iso 
storage.owner-gid 36
gluster volume start iso

gluster volume create export 
vs-host-colo-2-gluster.altn.int:/gluster/iso/brick1
gluster volume set export storage.owner-uid 36 && gluster volume set export 
storage.owner-gid 36
gluster volume start export

Thanks

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Setting up hosted engine appliance on a bonded interface

2017-03-23 Thread Bryan Sockel

Hi,

I am attempting to deploy an appliance to a bonded interface, and i getting 
this error when it attempts to setup the bridge:


[ ERROR ] Failed to execute stage 'Misc configuration': Failed to setup 
networks {'ovirtmgmt': {'bonding': 'bond0', 'ipaddr': u'10.20.101.181', 
'netmask': u'255.255.255.0', 'defaultRoute': True, 'gateway': 
u'10.20.101.1'}}. Error code: "-32603" message: "Attempt to call function: 
> with 
arguments: ({u'ovirtmgmt': {u'bonding': u'bond0', u'ipaddr': 
u'10.20.101.181', u'netmask': u'255.255.255.0', u'defaultRoute': True, 
u'gateway': u'10.20.101.1'}}, {}, {u'connectivityCheck': False}) error: 
'NoneType' object is not iterable"


Is it possible to deploy an appliance to a network bond?  My Network guy has 
configured my ports in the switch so i can connect via bonded links.  
however, if the interfaces are not bonded, it will suspend the links.___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Issue with Moving Disks

2017-02-12 Thread Bryan Sockel
I was able to clear out the kill the locks of the files, but i have orphaned 
tasks still running, so i am unable to start up the VM. I am trying to clear 
out the orphaned tasks using the taskcleaner.sh script.  But i do not know 
what the task id is.


Thanks

-Original Message-
From: Idan Shaby <ish...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Sun, 12 Feb 2017 10:04:57 +0200
Subject: Re: [ovirt-users] Issue with Moving Disks

Hi,

Can you please attach engine and vdsm logs so we can investigate?


Thanks,
Idan
 
On Sat, Feb 11, 2017 at 9:19 PM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Hi,

I attempted to move a few disks from a glusterFS to an ISCSI file system. I 
have number of errors during the process, and it looks like a few of the 
disk moves are hung.  They are hung at various percentages. in the events, 
it says moving Disk X from A to B, validation completes but i copying volume 
returns with an error.

Is there a way to kill the move process so i can have access back to the 
VM's?



Thanks


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Issue with Moving Disks

2017-02-11 Thread Bryan Sockel
Hi,

I attempted to move a few disks from a glusterFS to an ISCSI file system. I 
have number of errors during the process, and it looks like a few of the 
disk moves are hung.  They are hung at various percentages. in the events, 
it says moving Disk X from A to B, validation completes but i copying volume 
returns with an error.

Is there a way to kill the move process so i can have access back to the 
VM's?



Thanks
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Network issues

2017-02-10 Thread Bryan Sockel
Need some help.  I was doing some work on one of my ovirt hosts, removed it 
from cluster, and re-added it to the cluster to bring it back into my 
working cluster.  I got a messege that my network's where out of sync.  I 
accidentally sync'd up my working network, now neither of my hosts will 
bring launch my hosted engine appliance.  While machines aren't currently 
mission critical, i do need to get these machines backup up and running.


The network configuration is supposed to be 6 nics forming a bond network, 
my vlan's hanging off that bond, including my ovirtmgmt network.




Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 :81:00.1 p1p2: Flow 
control is off for TX and off for RX
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: tg3 :81:00.1 p1p2: EEE 
is disabled
Feb 10 11:17:22 vm-host-altn-2.altn.int kernel: bond0: link status 
definitely up for interface p1p2, 1000 Mbps full duplex
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.102:  [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.20:  can't add bond0.20 to bridge DMZ: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.30:  can't add bond0.30 to bridge Devel: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.40:  can't add bond0.40 to bridge Lab: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
bond0.50:  can't add bond0.50 to bridge Workstation: Operation not supported
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [  OK  ]
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: Bringing up interface 
Workstation:  device Workstation already exists; can't create bridge with 
the sa
Feb 10 11:17:26 vm-host-altn-2.altn.int network[1522]: [FAILED]
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: network.service: control 
process exited, code=exited status=1
Feb 10 11:17:26 vm-host-altn-2.altn.int systemd[1]: Failed to start LSB: 
Bring up/down networking.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit network.service has failed.


..


Thanks___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Host Issue

2017-02-02 Thread Bryan Sockel
Hi,

Came into the office with an issue with my ovirt setup this morning.  On one 
of my hosts the / partition was completely full causing the host to go into 
an unknown state.  I was able to clear out some space for the time being and 
attempting to recover my that host.  VM's are still running and responding 
on the host.

I am using Gluster volumes in my configuration, and had to restart gluster 
service on that host.  I also restarted the ovirt-ha-agent service.

I am seeing this entry in my agent.log every two seconds:

MainThread::INFO::2017-02-02 
09:11:19,606::util::214::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(connect_vdsm_json_rpc)
 
Waiting for VDSM hardware info

In my vdsm.log i am seeing this
jsonrpc.Executor/4::INFO::2017-02-02 
09:13:42,088::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getAllVmStats' in bridge with {}
jsonrpc.Executor/4::INFO::2017-02-02 
09:13:42,088::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getAllVmStats failed (error 99) in 0.00 seconds
jsonrpc.Executor/5::INFO::2017-02-02 
09:13:42,114::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getHardwareInfo' in bridge with {}
jsonrpc.Executor/5::INFO::2017-02-02 
09:13:42,115::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getHardwareInfo failed (error 99) in 0.00 seconds
jsonrpc.Executor/6::INFO::2017-02-02 
09:13:44,121::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getHardwareInfo' in bridge with {}
jsonrpc.Executor/6::INFO::2017-02-02 
09:13:44,122::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getHardwareInfo failed (error 99) in 0.00 seconds
jsonrpc.Executor/7::INFO::2017-02-02 
09:13:46,127::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getHardwareInfo' in bridge with {}
jsonrpc.Executor/7::INFO::2017-02-02 
09:13:46,127::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getHardwareInfo failed (error 99) in 0.00 seconds
clientIFinit::DEBUG::2017-02-02 
09:13:46,257::task::597::Storage.TaskManager.Task::(_updateState) 
Task=`ba88b701-9f7a-488e-9c80-3d61cec38053`::moving from state init -> state 
preparing
clientIFinit::INFO::2017-02-02 
09:13:46,258::logUtils::49::dispatcher::(wrapper) Run and protect: 
getConnectedStoragePoolsList(options=None)
clientIFinit::INFO::2017-02-02 
09:13:46,258::logUtils::52::dispatcher::(wrapper) Run and protect: 
getConnectedStoragePoolsList, Return response: {'poollist': []}
clientIFinit::DEBUG::2017-02-02 
09:13:46,258::task::1193::Storage.TaskManager.Task::(prepare) 
Task=`ba88b701-9f7a-488e-9c80-3d61cec38053`::finished: {'poollist': []}
clientIFinit::DEBUG::2017-02-02 
09:13:46,258::task::597::Storage.TaskManager.Task::(_updateState) 
Task=`ba88b701-9f7a-488e-9c80-3d61cec38053`::moving from state preparing -> 
state finished
clientIFinit::DEBUG::2017-02-02 
09:13:46,258::resourceManager::952::Storage.ResourceManager.Owner::(releaseAll) 
Owner.releaseAll requests {} resources {}
clientIFinit::DEBUG::2017-02-02 
09:13:46,259::resourceManager::989::Storage.ResourceManager.Owner::(cancelAll) 
Owner.cancelAll requests {}
clientIFinit::DEBUG::2017-02-02 
09:13:46,259::task::995::Storage.TaskManager.Task::(_decref) 
Task=`ba88b701-9f7a-488e-9c80-3d61cec38053`::ref 0 aborting False
clientIFinit::INFO::2017-02-02 
09:13:46,259::clientIF::558::vds::(_waitForStoragePool) recovery: waiting 
for storage pool to go up
jsonrpc.Executor/0::INFO::2017-02-02 
09:13:48,133::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getHardwareInfo' in bridge with {}
jsonrpc.Executor/0::INFO::2017-02-02 
09:13:48,134::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getHardwareInfo failed (error 99) in 0.00 seconds
jsonrpc.Executor/1::INFO::2017-02-02 
09:13:50,140::__init__::525::jsonrpc.JsonRpcServer::(_handle_request) In 
recovery, ignoring 'Host.getHardwareInfo' in bridge with {}
jsonrpc.Executor/1::INFO::2017-02-02 
09:13:50,140::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call 
Host.getHardwareInfo failed (error 99) in 0.00 seconds
clientIFinit::DEBUG::2017-02-02 
09:13:51,265::task::597::Storage.TaskManager.Task::(_updateState) 
Task=`e8c558b1-f5d0-49ea-ac92-51660d03636e`::moving from state init -> state 
preparing
clientIFinit::INFO::2017-02-02 
09:13:51,265::logUtils::49::dispatcher::(wrapper) Run and protect: 
getConnectedStoragePoolsList(options=None)
clientIFinit::INFO::2017-02-02 
09:13:51,265::logUtils::52::dispatcher::(wrapper) Run and protect: 
getConnectedStoragePoolsList, Return response: {'poollist': []}
clientIFinit::DEBUG::2017-02-02 
09:13:51,265::task::1193::Storage.TaskManager.Task::(prepare) 
Task=`e8c558b1-f5d0-49ea-ac92-51660d03636e`::finished: {'poollist': []}
clientIFinit::DEBUG::2017-02-02 
09:13:51,266::task::597::Storage.TaskManager.Task::(_updateState) 

Re: [ovirt-users] Host Device Mapping

2017-01-23 Thread Bryan Sockel
Ennableing IOMMU fixed it.  Thanks.




-Original Message-
From: Martin Polednik <mpoled...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Mon, 23 Jan 2017 08:51:52 +0100
Subject: Re: Host Device Mapping

On 20/01/17 14:38 -0600, Bryan Sockel wrote:
>
>Hi,
>
>I am trying to map a host device to a VM, I am able to get the host device
>mapped to the VM, but i am unable to start the vm.  I receive the following
>Error:
>
>Error while executing action:
>
>VM:
>Cannot run VM. There is no host that satisfies current scheduling
>constraints. See below for details:
>The host vm-host-1 did not satisfy internal filter HostDevice because it
>does not support host device passthrough..
>The host vm-host-2 did not satisfy internal filter HostDevice because it
>does not support host device passthrough..

Is the host device you're trying to pass through on the PCI bus? Is
IOMMU enabled in your bios and kernel? Host requirements section in
[1] could help.

[1] 
http://www.ovirt.org/develop/release-management/features/engine/hostdev-passthrough/

>___
>Users mailing list
>Users@ovirt.org
>http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Host Device Mapping

2017-01-20 Thread Bryan Sockel

Hi,

I am trying to map a host device to a VM, I am able to get the host device 
mapped to the VM, but i am unable to start the vm.  I receive the following 
Error:

Error while executing action: 

VM:
Cannot run VM. There is no host that satisfies current scheduling 
constraints. See below for details:
The host vm-host-1 did not satisfy internal filter HostDevice because it 
does not support host device passthrough..
The host vm-host-2 did not satisfy internal filter HostDevice because it 
does not support host device passthrough..
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] HostedEngine Storage

2016-10-27 Thread Bryan Sockel
Hi,

We currently have our HostedEngine VM running on a gluster Replica 3 storage 
domain.  Is there a way to modify the mount options in oVirt to specify the 
Backup-Volfile servers?  ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Importing VM's from VMware

2016-10-26 Thread Bryan Sockel
The process finished successfully, took about 4 hours per vm, not sure if 
this is typical or not, but this being our first test run i was afraid that 
it may have stopped and was unsure.  I will check the VDSM.log file on the 
next test migration i do.

​​​Thanks

-Original Message-
From: Tomáš Golembiovský <tgole...@redhat.com>
To: "Bryan Sockel" <bryan.soc...@altn.com>
Cc: "users@ovirt.org" <users@ovirt.org>
Date: Tue, 25 Oct 2016 00:36:50 +0200
Subject: Re: [ovirt-users] Importing VM's from VMware

Hi,

during the import process engine shows status like "Initializing",
"Copying disk x/y" and "Finishing" next to the VM.

Could you check in the engine status of the import task? Did it finish
successfully or with an error? You can also check the vdsm.log for any
errors.


Best regards,

Tomas


On Mon, 24 Oct 2016 13:42:44 -0500
"Bryan Sockel" <bryan.soc...@altn.com> wrote:

> Hi,
>
> We are making our first attempt at importing VM's from VMWare, i am able 
to
> connect to our VMWare environment and i can choose a VM to import and i am
> able to start the process.  A VM is created, the disk is created as well
> then the task completes in ovirt.  Looking at my virtual machines, the vm
> shows up with a red arrow and a lock next to it.  
>
> After that there are no tasks that appear.  Is there a way to monitor the
> import process of the VM?  
>
> Currently running Ovirt 4.04.
>
> Thanks


--
Tomáš Golembiovský <tgole...@redhat.com>___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Importing VM's from VMware

2016-10-24 Thread Bryan Sockel
Hi,

We are making our first attempt at importing VM's from VMWare, i am able to 
connect to our VMWare environment and i can choose a VM to import and i am 
able to start the process.  A VM is created, the disk is created as well 
then the task completes in ovirt.  Looking at my virtual machines, the vm 
shows up with a red arrow and a lock next to it.  

After that there are no tasks that appear.  Is there a way to monitor the 
import process of the VM?  

Currently running Ovirt 4.04.

Thanks___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Ovirt setup

2016-10-05 Thread Bryan Sockel
Hi,

I am getting an error attempting to install ovirt on a pair of bonded nics.  
The error that we are getting is Cannot acquire nic/bridge address.

We typically run all our servers with an active/backup setup. ___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Hardware setup

2016-09-09 Thread Bryan Sockel

Agree'd don't need to over complicate things, just trying to figure out 
things from a budgetary standpoint and how to make every thing fit in.
-Original Message-
From: Fernando Fuentes <ffuen...@darktcp.net>
To: Fernando Frediani <fernando.fredi...@upx.com.br>, users@ovirt.org
Date: Fri, 09 Sep 2016 13:01:54 -0500
Subject: Re: [ovirt-users] Hardware setup

If you have the need to save in power and in hardware than by all means go 
for it and do what fits you...
Compute nodes should be treated as a disposable node, One goes out and you 
shouldn't have to worry much about it. The more you "hyperconverge"  the 
more you are exposing your self to self-inflicted chaos (Complexity). I am 
the keep it simple and standard guy... Let the next guy be able to figure 
things out without having to pull hairs... 

Yes is the new thing, the new "Just DO IT!" In my peace of mind, Storage 
stays where it needs to be... On its own world of IOPS and Drives.
I know what it is and where is going. Its just not my cup of tea (For now)


My 2 Centavos.

Regards,

--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org



On Fri, Sep 9, 2016, at 12:38 PM, Fernando Frediani wrote:
What is the reason for ? A lot of stuff is moving into Hyperconvergence and 
that saves a lot of hardware and power consumption.

The only thing I would look with more caution is the amount of memory 
Gluster itself consumes, but if there are enough resources in each host for 
Distributed Storage + Compute stuff I see no problems with that, unless 
someone has some strong technical reason for not.

Fernando


On 09/09/2016 12:43, Fernando Fuentes wrote:
Bryan,

Just my opinion but I would separate storage away from your compute nodes.

Regards,

--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org



On Fri, Sep 9, 2016, at 10:28 AM, Bryan Sockel wrote:
Hi,
 
I am looking to put together a configuration setup for a new install and was 
wondering if it is ok for have both gluster and ovirt running on the same 
systems, or if it was better to separate my storage on to anther platform?
 
I am currently looking into 3 servers with 196 GB Ram, dual 6 core proc's on 
each server.  Gluster would be installed on each server with a 3 way 
replica, ovirt would be running as an appliance and each node would be part 
of the ovirt cluster.
 
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Hardware setup

2016-09-09 Thread Bryan Sockel
Yes that is the document i have been looking at, unfortunately i am still 
pretty new to the ovirt/gluster world.  But both seem like the would be a 
great fit for our goals.

-Original Message-
From: Simone Tiraboschi <stira...@redhat.com>
To: Bryan Sockel <bryan.soc...@altn.com>
Cc: users <users@ovirt.org>
Date: Fri, 9 Sep 2016 18:12:29 +0200
Subject: Re: [ovirt-users] Hardware setup



On Fri, Sep 9, 2016 at 5:28 PM, Bryan Sockel <bryan.soc...@altn.com> wrote:
Hi,

I am looking to put together a configuration setup for a new install and was 
wondering if it is ok for have both gluster and ovirt running on the same 
systems, or if it was better to separate my storage on to anther platform?

I am currently looking into 3 servers with 196 GB Ram, dual 6 core proc's on 
each server.  Gluster would be installed on each server with a 3 way 
replica, ovirt would be running as an appliance and each node would be part 
of the ovirt cluster.


That approach is called hyper-converged.
With 4.0 is still somehow bleeding edge and not recommended for a production 
env; a stable solution will come quite early.
If you want start playing with it you can take a look at this article which 
exactly covers what you want to do:
https://www.ovirt.org/blog/2016/08/up-and-running-with-ovirt-4-0-and-gluster-storage/



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Hardware setup

2016-09-09 Thread Bryan Sockel
Thanks,

>From what i have read gluster does not need a whole lot of processing power, 
correct? Should a single CPU multi core proc be able to handle the load of 
30+ vm's?

Currently we are on an old EMC NAS device for our vm infrastructure and 
would like to find a low cost solution to move to.



-Original Message-
From: Fernando Fuentes <ffuen...@darktcp.net>
To: Bryan Sockel <bryan.soc...@altn.com>, users <users@ovirt.org>
Date: Fri, 09 Sep 2016 10:43:46 -0500
Subject: Re: [ovirt-users] Hardware setup

Bryan,

Just my opinion but I would separate storage away from your compute nodes.

Regards,

--
Fernando Fuentes
ffuen...@txweather.org
http://www.txweather.org



On Fri, Sep 9, 2016, at 10:28 AM, Bryan Sockel wrote:
Hi,
 
I am looking to put together a configuration setup for a new install and was 
wondering if it is ok for have both gluster and ovirt running on the same 
systems, or if it was better to separate my storage on to anther platform?
 
I am currently looking into 3 servers with 196 GB Ram, dual 6 core proc's on 
each server.  Gluster would be installed on each server with a 3 way 
replica, ovirt would be running as an appliance and each node would be part 
of the ovirt cluster.
 
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Hardware setup

2016-09-09 Thread Bryan Sockel
Hi,

I am looking to put together a configuration setup for a new install and was 
wondering if it is ok for have both gluster and ovirt running on the same 
systems, or if it was better to separate my storage on to anther platform?

I am currently looking into 3 servers with 196 GB Ram, dual 6 core proc's on 
each server.  Gluster would be installed on each server with a 3 way 
replica, ovirt would be running as an appliance and each node would be part 
of the ovirt cluster.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Networking issues on Hosted Engine Appliance

2016-09-01 Thread Bryan Sockel
Having some issues with my Hosted Engine Appliance,  I am able to get it up 
and running, and i can access it only from the server that is hosting it.  
The host server can ping the appliance, and the appliance can ping the host 
server.  The host server can ping the rest of my network and get out to the 
internet.

This is a nested setup i am using for testing and poc and is running on a 
vmware platform.

Server IP Config: 

eno16777984: flags=4163  mtu 1500
ether 00:50:56:01:0d:48  txqueuelen 1000  (Ethernet)
RX packets 572078  bytes 673729777 (642.5 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 342235  bytes 191490802 (182.6 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73  mtu 65536
inet 127.0.0.1  netmask 255.0.0.0
loop  txqueuelen 0  (Local Loopback)
RX packets 831524  bytes 6927010219 (6.4 GiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 831524  bytes 6927010219 (6.4 GiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
ovirtmgmt: flags=4163  mtu 1500
inet 10.20.42.3  netmask 255.255.252.0  broadcast 10.20.43.255
ether 00:50:56:01:0d:48  txqueuelen 0  (Ethernet)
RX packets 957838  bytes 796793041 (759.8 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 795846  bytes 4627811240 (4.3 GiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
vnet0: flags=4163  mtu 1500
ether fe:16:3e:20:fc:a2  txqueuelen 500  (Ethernet)
RX packets 3434  bytes 11065518 (10.5 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 9008  bytes 2493747 (2.3 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse 
Iface
default gw-lab.colo.test 0.0.0.0 UG0  00 
ovirtmgmt
10.20.40.0  0.0.0.0 255.255.252.0   U 0  00 
ovirtmgmt
link-local  0.0.0.0 255.255.0.0 U 1004   00 
ovirtmgmt


Appliance:
eth0: flags=4163  mtu 1500
inet 10.20.42.17  netmask 255.255.252.0  broadcast 10.20.43.255
ether 00:16:3e:20:fc:a2  txqueuelen 1000  (Ethernet)
RX packets 9489  bytes 2674331 (2.5 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 3655  bytes 11370881 (10.8 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
lo: flags=73  mtu 65536
inet 127.0.0.1  netmask 255.0.0.0
loop  txqueuelen 0  (Local Loopback)
RX packets 67298  bytes 36550074 (34.8 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 67298  bytes 36550074 (34.8 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse 
Iface
default ovirt1.test.lab 0.0.0.0 UG10000 eth0
10.20.40.0  0.0.0.0 255.255.252.0   U 10000 eth0

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users