. március 10., péntek 14:46 CET
Tantárgy: Re: [ovirt-users] Re: renew certificates
Yes:
ticket was good till Dec 23 2022
and last system boot 2022-12-31
Regards
Carl
On Fri, Mar 10, 2023 at 8:39 AM Demeter Tibor wrote:
Dear Carl,
I don't know but I don't wanna try what
., péntek 14:32 CET
Tantárgy: Re: [ovirt-users] Re: renew certificates
Hi Tibor,
You are right. This certificate expired last December and was not renewed. Why
am I not seeing any issue?
Regards
Carl
On Fri, Mar 10, 2023 at 8:16 AM Demeter Tibor wrote:
Dear Carl,
Yes, I did
the certificat. So not sure why it is not doing
it on your side. Regards Carl
Le ven. 10 mars 2023, 04 h 04, Demeter Tibor a écrit :
Dear Darell,
Thank you for your reply.
That solution is not working on 4.3, because engine-setup does not renew these
certs. It was a bug and it was resolved
Másolat: users
Dátum: 2023. március 9., csütörtök 17:44 CET
Tantárgy: Re: [ovirt-users] renew certificates
Run engine-setup on your engine, it should ask to renew the cert and CA for
you. -Darrell
On Mar 9, 2023, at 6:19 AM, Demeter Tibor wrote:
Dear listmembers, We have an ovirt 4.3
Dear listmembers,
We have an ovirt 4.3 hyperconverged system and couple certificates will expire
in next month.
/etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT
/etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023
GMT
Dear Listmembers,
Is it possible to import ovirt 4.3's VMs into a new ovirt environment via our
old storage domains?
I have an old 4.3 self-hosted system with 3 storage domain, but it seems very
difficult upgrade until 4.5.
I just wondering, what if I do install a complety new system and
: [ovirt-users] Replace storage behind ovirt engine
On Wed, Mar 16, 2022 at 1:39 PM Demeter Tibor wrote:
>
> Dear Users,
>
> I have to upgrade our hyperconverged ovirt system from 4.3 to 4.4, but
> meanwhile I would like to change the storage backend under the engine. At
Dear Users,
I have to upgrade our hyperconverged ovirt system from 4.3 to 4.4, but
meanwhile I would like to change the storage backend under the engine. At this
moment it is a gluster based clustered fs, but I don't really like it I
would like to change to a hardver based iscsi
Dear Listmembers,
How can I exctract the expiration dates all certificates which ovirt are uses?
Also, is there any command or tool in ovirt what I can use to create and deploy
new certifications on hosted engine and hosts?
Thanks in advance,
Regards,
Tibor
Dear Users,
I have exactly same problem.
When I trying to migrate a big (16 TB) disk image to an another storage domain,
i've got this error message:
Error while executing action: Cannot move Virtual Disk. Low disk space on
Storage Domain Backup.
But I have a lot of space...
Ovirt 4.3.7
Dear Users,
I've successfully upgraded my 4 node hyperconverged system from 4.2.8 to 4.3.7.
After upgrade everything seems to working fine, but the whole management system
seems very slow.
Spends many seconds when I clicking on "virtual machines" or I want to edit a
virtual machines.
The
Dear list members,
I would like to upgrade my Centos 7.6 based ovirt 4.2 to 4.3.5.
How is safe the upgrade ? How is stable the actual branch ?
It seems to me, in 4.3.x there are a lot of cases caused by live migration,
snapshot deletion, etc. Are these really existing problems?
So, I'm a
Hi All,
I did began a very big project, I've started upgrade a cluster from 3.5 to
4.3...
It was a mistake:(
Since upgrade, I can't start the host. The UI seems to working fine.
[root@virt ~]# service vdsm-network start
Redirecting to /bin/systemctl start vdsm-network.service
Job for
https://ovirt.org/develop/release-management/features/storage/manage-storage-connections/
> ]
> On Mon, Dec 10, 2018 at 2:16 PM Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Dear All,
>> I have to change an IP address of one of my s
Dear All,
I have to change an IP address of one of my storage domains.
How is safe that? There are a lot of disk what running from what and parts of
some running VMs.
I thought the whole procedure like this:
- stop vms
- remove storage domain from inventory
- delete storage domain from
es as you describe, but since
> you are using a very old version of oVirt, the best I can recommend is
> to upgrade to 4.2.
>
> HTH
>
> On Thu, Dec 6, 2018 at 6:24 PM Demeter Tibor wrote:
>>
>> Dear All,
>>
>> I've using ovirt from 3.4 and we hav
ase and this
> depends
> on “ndbkit”.
> Possible workaround that should work:
> Edit the .repo containing “ovirt-4.2-epel” and add the following line
> to
> the “ovirt-4.2-epel” entry:
> exclude=ndbkit*
> then, rerun the update.
> Simon
>> On Dec 6, 2018,
in CentOS-Base.repo.
> My nodes are still 7.5, but hope that this can help anyway.
> My update process, done from hested-engine gui, has completed after the
> change.
> BR
> Il giorno gio 6 dic 2018 alle 20:19 Demeter Tibor < [
> mailto:tdeme...@itsmart.hu
> | tdeme...@it
Dear All,
I would like to upgrade my ovirt 4.2.5 to 4.2.7.
The hosted engine upgrade was success, but on the nodes i've got an dependency
error:
---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed
--> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package:
Dear All,
I've using ovirt from 3.4 and we have a strange, rarely problem with live
migrations.
- In most of case impossible to do a live migrate of VMs that have a lot of
memory (16 gigs and more up to 40 GB) .
- Those are need to try and try until the migration will be successful
-
Ok, thank you for all!
Regards,
Tibor
- 2018. dec.. 6., 11:06, Sandro Bonazzola írta:
> Il giorno gio 6 dic 2018 alle ore 10:39 Demeter Tibor < [
> mailto:tdeme...@itsmart.hu | tdeme...@itsmart.hu ] > ha scritto:
>> Dear All,
>> I just wondering I would like
Dear All,
I just wondering I would like to make an upgrade from 4.2.5 to latest stable
release of ovirt.
Meanwhile centos7.6 was released.
Will that compatible with the current release of ovirt?
How is safe an upgrade now?
Thanks in advance,
Regards,
Tibor
Dear users,
Around ovirt 4.2.2 after a bug I had switch to nightly from stable. Its was do
applied only on the engine, not compute nodes.
But now I would like to switch back to stable branch.
How is safe that? I just need do remove the nightly repo and update? Need to
apply a yum update *
art" button in the upper-right
> of the gui. clicking that resolved this problem a few minutes later.
> I had to repeat for each volume that showed a brick down for which that brick
> was not actually down.
> --Jim
> On Tue, May 29, 2018 at 6:34 AM, Demeter Tibor < [ mailt
in future.
I will attach my engine.log after upgrade my host.
Thanks,
Regards.
Tibor
- 2018. máj.. 28., 14:44, Sahina Bose <sab...@redhat.com> írta:
> On Mon, May 28, 2018 at 4:47 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
&g
; írta:
> On Mon, May 28, 2018 at 1:06 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Somebody could answer to my question please?
>> It is very important for me, I could no finish my upgrade process (from 4.1
>>
?
Thanks in advance,
Regards,
Tibor
- 2018. máj.. 23., 21:09, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> I've updated again to the latest version, but there are no changes. All of
> bricks on my first node are down in the GUI (in console are ok)
> An
Tibor
- 2018. máj.. 23., 14:45, Denis Chapligin <dchap...@redhat.com> írta:
> Hello!
> On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor < [
> mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Is there any changes with this bug?
>> Stil
Dear Sahina,
Is there any changes with this bug?
Still I haven't finish my upgrade process that i've started on 9th may:(
Please help me if you can.
Thanks
Tibor
- 2018. máj.. 18., 9:29, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> I have to update the
illa.redhat.com/show_bug.cgi?id=1574508 |
> https://bugzilla.redhat.com/show_bug.cgi?id=1574508 ]
> On Thu, May 17, 2018 at 10:12 PM, Demeter Tibor < [
> mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> 4.2.4-0.0.master.20180515183442.git00e13
at's the version of ovirt-engine
> currently installed?
> On Thu, May 17, 2018 at 5:10 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> sure,
>> Thank you for your time!
>> R
>> Tibor
>>
Hi,
I would like to change IP subnets of my hosts, but I have a glustered setup and
I can't remove/re-add my hosts because "server having gluster volume".
What will happen If I do force remove the host? It will kill or stop gluster on
host?
Thanks
Regards,
Tibor
Hi,
Could you explain how can I use this patch?
R,
Tibor
- 2018. máj.. 14., 11:18, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> Sorry for my question, but can you tell me please how can I use this patch?
> Thanks,
> Regards,
> Tibor
> - 2018. máj..
Hi,
Sorry for my question, but can you tell me please how can I use this patch?
Thanks,
Regards,
Tibor
- 2018. máj.. 14., 10:47, Sahina Bose <sab...@redhat.com> írta:
> On Sat, May 12, 2018 at 1:14 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@it
Meanwhile i just changed my gluster network to 10.104.0.0/24 but does not
happend anything.
Regards,
Tibor
- 2018. máj.. 14., 9:49, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> Yes, I have a gluster network, but it's "funny" because that is the
> 10.10
Is the network/interface group of your storage
> layer actually defined as a Gluster & Migration network within oVirt?
> On 12 May 2018 at 03:44, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Could someone help me please ?
Hi,
Could someone help me please ? I can't finish my upgrade process.
Thanks
R
Tibor
- 2018. máj.. 10., 12:51, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> I've attached the vdsm and supervdsm logs. But I don't have engine.log here,
> because that is on hosted en
te.
> Any errors in vdsm.log?
> Or errors in engine.log of the form "Error while refreshing brick statuses for
> volume"
> On Thu, May 10, 2018 at 2:33 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Thank
.. 10., 10:56, Sahina Bose <sab...@redhat.com> írta:
> Could you check the engine.log if there are errors related to getting
> GlusterVolumeAdvancedDetails ?
> On Thu, May 10, 2018 at 2:02 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] >
Dear Ovirt Users,
I've followed up the self-hosted-engine upgrade documentation, I upgraded my
4.1 system to 4.2.3.
I upgaded the first node with yum upgrade, it seems working now fine. But since
upgrade, the gluster informations seems to displayed incorrect on the admin
panel. The volume
"ethtool "?
> Also, please mention what is the network name which is defined to use this
> device.
> Thanks,
> Edy.
> On Wed, May 9, 2018 at 3:13 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi All,
>> I did
Hi All,
I did successfully upgraded my 4.1 hosted engine and the first node to 4.2.3.
Since upgrade, the node's 10Gbe connection does not work. It was the connection
between host and storage. That is why, now I can't activate my node.
I have IP and I have all of bonding, and it seems to fine.
Hi,
Thank you for the answer. In this case I have to find and another solution to
repair live migration.
Somebody could help me in this problem?
Thanks,
R.
Tibor
- 2018. máj.. 8., 10:38, Gianluca Cecchi <gianluca.cec...@gmail.com> írta:
> On Tue, May 8, 2018 at 9:29 AM
Dear Listmember,
I've just upgrade to my ovirt-hosted-engine from 4.1 to 4.2.3. It was
successful, but it saw " Data Center XYZ compatibility version is 4.1, which is
lower than latest engine version 4.2. Please upgrade your Data Center to latest
version to successfully finish upgrade of your
he switch setup is done here, but as far as i know
> they aren't stacked through interconnect.
>
> Luca
>
> On Fri, Jan 26, 2018 at 1:44 PM, Demeter Tibor <tdeme...@itsmart.hu> wrote:
>> Dear Luca,
>>
>> Sorry for the very late reply..
>>
&g
availability
> whwn you can't configure lacp or a portchannel on switch side.
> Luca
> Il 12 dic 2017 7:06 PM, "Demeter Tibor" < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > ha scritto:
>> Hi,
>> Thanks for the answers.
>> In this case
?
Thanks
Regards,
Tibor
- 2017. dec.. 11., 13:24, Simone Tiraboschi <stira...@redhat.com> írta:
> On Mon, Dec 11, 2017 at 12:53 PM, Demeter Tibor < [
> mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Could help anyone for me in
Hi,
Could help anyone for me in this question?
Thanks.
R.
Tibor
- 2017. dec.. 6., 14:07, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Dear members,
> I would like to use two switch to make high-availability network connection
> for
> my nfs storage.
> Unfortun
Dear members,
I would like to use two switches for make high-availability network connection
for my nfs storge.
Unfortunately, these switches does not support 802.3.ad lacp, (really I can't
stack them) but I've read about mode-alb and mode-tlb bonding modes.
I know,these modes are available
don't know how is enough this.
Thanks
Tibor
- 2017. nov.. 29., 18:26, Christopher Cox c...@endlessnow.com írta:
> On 11/29/2017 09:39 AM, Demeter Tibor wrote:
>>
>> Dear Users,
>>
>> We have an old ovirt3.5 install with a local and a shared clusters.
>> M
Dear Users,
We have an old ovirt3.5 install with a local and a shared clusters. Meanwhile
we created a new data center, that based on 4.1 and it use only shared
infrastructure.
I would like to migrate an big VM from the old local datacenter to our new, but
I don't have enough downtime.
Is
; írta:
> On Thu, Nov 16, 2017 at 7:11 PM Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Sorry for my bad English:(
>> Ovirt could not import my VM and disks from original storge-domain. It is an
>> NFS
>> share on
ly just rename) from
> original to recreated."
> What were the exact steps you took?
> Thanks
> On Thu, Nov 16, 2017 at 4:19 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Thank you for your reply.
&
then you create a snapshot including the two
> disks?
> Before creating the snapshot, did the VM recognize the two disks?
> On Mon, Nov 13, 2017 at 10:36 PM, Demeter Tibor < [
> mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Dear Users,
>> I have a d
Hi
Somebody please?
T.
- 2017. nov.. 15., 7:20, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> Can somebody help me?
> Thanks.
> T.
> - 2017. nov.. 13., 21:36, Demeter Tibor <tdeme...@itsmart.hu> írta:
>> Dear Users,
>> I have
Hi,
Can somebody help me?
Thanks.
T.
- 2017. nov.. 13., 21:36, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Dear Users,
> I have a disk of a vm, that is have a snapshot. It is very interesting,
> because
> there are two other disk of that VM, but there are no snap
Dear Users,
I have a disk of a vm, that is have a snapshot. It is very interesting, because
there are two other disk of that VM, but there are no snapshots of them.
I found this while I've try to migrate a storage-domain between two datacenter.
Because, I didn't import that vm from the
issues
> where your MAC address will change and udev will move it to eth# wherever # is
> the next available NIC in your VM host
> On Mon, Oct 2, 2017 at 12:54 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Can anyone a
Hi,
Can anyone answer my questions?
Thanks in advance,
R,
Tibor
- 2017. szept.. 19., 8:31, Demeter Tibor <tdeme...@itsmart.hu> írta:
> - I have a productive ovirt cluster based on 3.5 series. This using a shared
> nfs
> storage. Is it possible to migrate VMs
'interfaces %s' % (bond, bond_users))
ConfigNetworkError: (31, "Cannot remove bonding bond0: used by another
interfaces set(['bond0.105', 'bond0.104'])")
The four host network config is same, the ovirtmgmt bond.104 is the default
route.
How can I add another host to cluster?
Hi,
I just installed a hosted engine based four nodes cluster to glustered storage.
It seems to working fine, but I have some question about it.
- I would like to make an own cluster and datacenter. Is it possible to remove
a host and re-add to an another cluster while it is running the
- 2017. szept.. 11., 16:14, Yaniv Kaul <yk...@redhat.com> írta:
> On Mon, Sep 11, 2017 at 4:17 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Dear Listmembers,
>> Somebody know when will be available the CBT (ch
Dear Listmembers,
Somebody know when will be available the CBT (changed block tracking) feature
in ovirt/rhev?
We looking for an usable backup solution for our ovirt guests, but I've see,
there are some API limitation yet.
Thanks in advance,
R
Tibor
gt; Email: [ mailto:yd...@redhat.com | yd...@redhat.com ] IRC : ydary
> On Tue, Nov 15, 2016 at 4:37 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Dear users,
>> We have an ovirt cluster with three nodes and centralized stora
[ mailto:yd...@redhat.com | yd...@redhat.com ] IRC : ydary
>> On Tue, Nov 15, 2016 at 4:29 PM, Demeter Tibor < [
>> mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > wrote:
>>> Dear All,
>>> I have a running vm that have a snapshot. It was mad
Dear users,
We have an ovirt cluster with three nodes and centralized storage.(nfs based).
The clusters based on centos6 os.
We bought some new server for more resources, but we want to upgrade to 4.0 .
Is it possible to make brand new install and import all of VM-s from storage?
The
Dear All,
I have a running vm that have a snapshot. It was made until the machine was
stopped. This snapshot is a consistent backup of the whole vm.
Is it possible to extract the snapshot from the running vm's image? I have try
the qemu-img, but I didn't found similar function.
I need the
Hi,
- 2016. júl.. 14., 10:09, Yedidyah Bar David d...@redhat.com írta:
> On Thu, Jul 14, 2016 at 10:38 AM, Demeter Tibor <tdeme...@itsmart.hu> wrote:
>>
>> Dear members!
>>
>> We have an ovirt cluster that based on el6 and 3.5.6
>> It is contain th
Dear members!
We have an ovirt cluster that based on el6 and 3.5.6
It is contain three nodes, but the first node is an all-in-one installation.
I would like to upgrade the whole system to 4.0. Also I would like to switch to
hosted engine modell.
Now, we bought new servers for the migration.
back end, 10gbe is probably faster than your
> disks can read and write.
>
> On Sep 7, 2015 4:26 PM, Demeter Tibor <tdeme...@itsmart.hu> wrote:
>>
>> Hi All,
>>
>> I have to create a test environment for testing purposes, because we need to
>> testing
Hi All,
I have to create a test environment for testing purposes, because we need to
testing our new 10gbe infrastructure.
One server that have a 10gbe nic - this is the vdsm host and ovirt portal.
One server that have a 10gbe nic - this is the storage.
Its connected to each other throught
floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com IRC : ydary
On Tue, Aug 18, 2015 at 7:48 AM, Demeter Tibor tdeme...@itsmart.hu wrote:
Hi,
Every host are different hostnames, it does not change since reinstall.
Maybe node1 got diffrerent
?
On 08/17/2015 12:49 PM, Demeter Tibor wrote:
Dear Sahina,
Thank you for your reply.
Volume Name: g2sata
Type: Replicate
Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: 172.16.0.10:/data/sata/brick2
Brick2
info output from? What is
the output of gluster peer status and gluster volume info on node1?
On 08/17/2015 12:49 PM, Demeter Tibor wrote:
Dear Sahina,
Thank you for your reply.
Volume Name: g2sata
Type: Replicate
Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8
Status: Started
the hostnames of the machines different ive had it before where
migrations fail because they have the same hostname or uuid for that matter
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
Omer Frenkel
Sent: Monday, August 17, 2015 01:02 AM
To: Demeter Tibor
Cc: users
Hi,
I reinstalled one of my nodes (node1) because I have to replace my hdds.
I installed centos 6.6 minimal, but on node re-adding procecure it installed
newer qemu-kvm-rhev packages.
Since reinstall I can run VMs on this node and I can do live migrate from this
node to other, but not
Hi All,
I have to upgrade ovirt 3.5.0 to 3.5.3. We have a 3 node system and we have a
gluster replica beetwen 2 node of these 3 servers.
I had gluster volume beetwen node0 and node2
But I wanted to do a new volume beetwen node1 and node2.
It didn't work, it complety kill my node1, because
Hi,
Is it possible to change root password on ovirt hosts?
What does happend if I changes this ?
Thanks
Tibor
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Dear Listmembers,
I have a 3 node ovirt system, it's based on self-host glusterfs.
Today, I did a vm migration but it was unsuccessful.
The vm got a paused state and it was unable to resume and it was impossible to
switch off. Cause I killed it on the compute node, but it's remains as paused
- 2015. júl.. 13., 16:52, Doron Fediuck dfedi...@redhat.com írta:
On 13/07/15 17:02, Demeter Tibor wrote:
Dear Listmembers,
I have a 3 node ovirt system, it's based on self-host glusterfs.
Today, I did a vm migration but it was unsuccessful.
The vm got a paused state and it was unable
?
Thanks.
Tibor
- Eredeti üzenet -
Hi,
No, I have only one replica beetwen two nodes.
The third node is only a host for vms and that using this replica.
Thanks
Tibor
- Eredeti üzenet -
On 01/22/2015 08:03 PM, Demeter Tibor wrote:
Hello,
I have an ovirt
Hi,
No, I have only one replica beetwen two nodes.
The third node is only a host for vms and that using this replica.
Thanks
Tibor
- Eredeti üzenet -
On 01/22/2015 08:03 PM, Demeter Tibor wrote:
Hello,
I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs
Hello,
I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs for
serving backend storage for VM-s. Glusterfs are on same servers with ovirt.
We have Gluster 3.5.1 on all of nodes.
How can I upgrade to ovirt 3.5.1 with new glusterfs? I don't want data
inconsistency/data
Hi,
I would like to make a public redirect to ovirt userportal like
https://foo.domain.com that redirect me to my ovirt userportal that running on
internal network, with not public ip address (172.16.0.1), but I don't want to
create access for administrator portal.
Also, I would like to add
Hi,
I have an ovirt 3.5 with glusterfs and three nodes. centos 6.5 and glusterfs
3.5.2.
When I do a snapshot deletion on stopped VM, then on the SPM host eats all of
virtual memory and whit this kill all of running VMs that is running on SPM
host.
It is a very big problem because I need to
Hi,
After a live VM storage movement process Ovirt has been created two snapshots.
(I have two disks in vm)
I have powered off and delete this snapshots.
(It was long,long time)
Before the process I had 830 GB of free spaces, but after deletion it hasn't
freed up spaces, inversely, at this
and the ovirt-event-notifier service is running.
Thanks,
Einav
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: users@ovirt.org List users@ovirt.org
Sent: Wednesday, December 17, 2014 3:18:19 PM
Subject: [ovirt-users] event monitoring
Hi,
How can I get
Hi,
I would like to add access the ovirt-user-portal webui for external users.
Could I seperate this from ovirt-portal-server?
I just wondering, maybe that is a possible way if I create an virtual machine
for user-portal with external IP address and the users could connect to them.
I don't
Hi,
We have a productive ovirt 3.5 cluster with 3 nodes.
The first node has 40 gb of memory and running only one VM that use 8 gb of
ram.
But the supervdsmserver consumes 20% of host memory.
On the second node has 32 GB of memory with 5 VMs. On this node the
supervdsmserver using 30%(!) of
Hi,
Anybody can help me?
Thanks a lot.
Regards,
Tibor
- Eredeti üzenet -
Hi all,
How can I make own querys in engine reports?
I would like to see the CONSUMED disk usage of a VM /day or /month.
Is it possible?
Thanks in advance,
Tibor
.
You can find guide to use this tool in the JasperSoft community website.
Yaniv
- Original Message -
From: Shirly Radco sra...@redhat.com
To: Demeter Tibor tdeme...@itsmart.hu
Cc: users@ovirt.org List users@ovirt.org, Yaniv Dary
yd...@redhat.com
Sent: Sunday, November 30
Hi all,
How can I make own querys in engine reports?
I would like to see the CONSUMED disk usage of a VM /day or /month.
Is it possible?
Thanks in advance,
Tibor
___
Users mailing list
Users@ovirt.org
manager' -W -S
uid=USERNAME,cn=users,cn=accounts,dc=example,dc=org -H ldap://
ipaserver.example.org
You'll need to set the username (USERNAME) domain ( example.org ) and server
FQDN accordingly.
Hope this helps,
On Wed, Nov 19, 2014 at 8:38 PM, Demeter Tibor tdeme...@itsmart.hu wrote:
Hi
Hi,
I have an IPA server 3.0 on centos 6.6.
I successfully attached to my ovirt cluster.
I can see the users on ovirt user tab, but after auth I always get this error:
Cannot Login. User Password has expired. Use the following URL to change the
password: (nothing)
I have try out with
/19/2014 01:30 AM, Demeter Tibor wrote:
Hi,
I think is a really good question, why does not possible sepereate storage
network traffic like display, etc?
This is not an easy task to set up, and it's more difficult on a live
system.
Tibor
- Eredeti üzenet -
On 18/11/14
Hi,
I think is a really good question, why does not possible sepereate storage
network traffic like display, etc?
This is not an easy task to set up, and it's more difficult on a live system.
Tibor
- Eredeti üzenet -
On 18/11/14 06:25, Juan Pablo Lorier wrote:
Hi,
In my
Hi,
Meanwhile this happening in every two hours.
For example 09:21, 11:21, 13:21
Anybody can me help?
Thanks,
Tibor
- Eredeti üzenet -
Hi,
In this morning I have got a lot of similar messages to console:
2014-Nov-17, 03:21
Detected conflict in hook
this night this feature.
Thanks a lot,
Tibor
- Eredeti üzenet -
Hi Tibor,
On 13/11/14 13:41, Demeter Tibor wrote:
Hi,
I have a 3 node gluster based cluster. There are 3x3 Nic with bonding.
Sometimes the management is very slow because high gluster traffic.
Is it possible
Ok, thanks a lot!
Have a nice day,
Tibor
- Eredeti üzenet -
On 17/11/14 15:10, Demeter Tibor wrote:
Hello,
Thank you for the detailed reply.
Yes, the vms are used an independent network/network interfaces for access
the internet.
So, in this case I could separate
Hi,
Thank for tipp, but it is not possible on my productive system.
I just wondering, how is possible to change the network of ovirt management?
Thanks
Tibor
- Eredeti üzenet -
On 13/11/14 08:41, Demeter Tibor wrote:
Hi,
I have a 3 node gluster based cluster. There are 3x3
1 - 100 of 146 matches
Mail list logo
