Re: [ovirt-users] Upgrading oVirt-Node-NG from 4.0.3 to 4.0.6

2017-02-13 Thread Fabian Deutsch
Hey Thomas,

you should be able to run yum update on Node to get it updated to the
latest version.

If this fails, then you can still download the rpm from jenkins (will
need to dig out the url) and the manually yum install the rpm to
update node.

- fabian

On Thu, Feb 9, 2017 at 3:24 PM, Thomas Kendall  wrote:
> Hey Yuval,
>
> If there is a way to download 4.0.6 and use it to upgrade the 4.0.3 node, I
> have not found that documentation yet. Is that how I'm suppose to do it? Do
> you have any links I can reference?
>
> Thanks,
> Thomas
>
>
> On Feb 9, 2017 3:51 AM, "Yuval Turgeman"  wrote:
>
> Hi, so 4.0.6 was downloaded but it is not upgrading the node ?
>
> On Fri, Feb 3, 2017 at 11:58 PM, Thomas Kendall  wrote:
>>
>> We recently migrated from 3.6 to 4.0, but I'm a little confused about how
>> to keep the nodes up to date. I see the auto-updates come through for my
>> 4.0.3 nodes, but they don't seem to upgrade them to the newer 4.0.x
>> releases.
>>
>> Is there a way to do this upgrade?  I have two nodes that were installed
>> with 4.0.3, and I would like to bring them up to the same version as
>> everything else.
>>
>> For reference, the 4.0.3 nodes were built off the 4.0-2016083011 iso, and
>> the 4.0.6 nodes were built off the 4.0-2017011712 iso.
>>
>> Thanks,
>> Thomas
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Node TUI

2017-01-31 Thread Fabian Deutsch
On Tue, Jan 31, 2017 at 2:02 AM, Douglas Schilling Landgraf
 wrote:
> Oi Fernando,
>
> On 01/30/2017 12:32 PM, Fernando Frediani wrote:
>>
>> Hi Douglas, thanks.
>>
>> No, just said if I have no network connectivity to the box for some
>> reason only tool to use is shell to try to get it back online correct ?
>
>
> Yes, you might use manual settings or TUI tools like nmtui as any other
> Linux distro.

Yes - nmtui or nmcli are the tools you can use here to get your host
hooked up to the network.

- fabian

>
>> It TUI thought to be back sometime or Cockpit will be the ongoing tool
>> for that ? (I find it nice the TUI interface too).
>
>
> I don't see any movement to bring back oVirt TUI. At moment, the Cockpit is
> the preferable.
>
>
>>
>> Fernando
>>
>> On 30/01/2017 13:55, Douglas Schilling Landgraf wrote:
>>>
>>> Ola Fernando!
>>>
>>> On 01/30/2017 09:23 AM, Fernando Frediani wrote:

 What happened with the TUI ?

 Have just installed a 4.1 oVirt Node and it seems it is CLI only and I
 only see a shell login. Is it correct ?
 I read some pages on ovirt.org saying the old TUI was problematic and it
 was being redesign but that seems old.

 Or do I understand correctly and everything is now handled by Cockpit ?
>>>
>>>
>>> That's correct. Cockpit is the preferred option.
>>>
 Then if I have no network CLI is my friend ?
>>>
>>>
>>> Not sure if I understood the question but in Cockpit, there is Network
>>> tab. Web-browser: NODE_IP_ADDRESS:9090 -> Networking
>>>
>>> Or are looking for something like nmcli/nmtui?
>>>
>>> --
>>> Cheers
>>> Douglas
>>
>>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Ovirt Nodes - Which OS

2016-09-26 Thread Fabian Deutsch
+1 for CentOS

It's currently probably the best tested and most stable platform when
looking at CentOS and Fedora.

- fabian

On Fri, Sep 23, 2016 at 12:06 PM, Maton, Brett <mat...@ltresources.co.uk> wrote:
> RHEL / CentOS 7 Are currently recommended, amongst others for Ovirt4.
>
>   You're getting the packages from ovirt's repository not the distro base so
> no need to worry that one distro or another is behind which would most
> likely be the case if you were getting base packages.
>
> On 23 September 2016 at 10:50, Carlos García Gómez
> <carlos.gar...@f-integra.org> wrote:
>>
>> Hello,
>>
>> I was testing  Ovirt inside a VDI proyect.
>> Now, I know there is new version of Ovrit (4.X) and VDI Software so I have
>> decided to remake the installation of all.
>>
>> I wonder which is the best OS platafform for the Host (Ovirt - Nodes).
>> (Fedora / Red Hat Enterprise Linux / CentOS) Now I have CentOS 7 64Bit
>> but... I am not sure.
>>
>> What do you think about it? Fedora or CentOS?
>> Which version? Fedora 19? Fedora 24? CentOS 6? CentOS 7?
>>
>> I always had the feeling that Fedora is a little ahead against CentOS for
>> example oVirt packages.
>>
>> Thank  you
>>
>> Regards,
>>
>> Carlos
>>
>>
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Software RAID installation fails

2016-08-31 Thread Fabian Deutsch
On Wed, Aug 31, 2016 at 2:28 PM, Brian Moyer <bdm...@gmail.com> wrote:
> Fabian,
>
> There's no way for one to stick with auto-partitioning when using
> software RAID. Your question did, however, lead me to question if I
> had ever gone through the "I will configure partitioning" path with
> just the default generated mount points. I had not, and it would
> appear to not be a problem with RAID, but a problem with any manual
> partitioning. I'm now very surprised that I cannot find anyone else
> having this issue.

Yes, true that you need to do manual partitioning when choosing to use a RAID.

For manual partitioning there are a few constraints which we did not
document yet - patches are welcome!

The constraints are:

- Use thin LVM
- /boot on a separate partition
- /var on a separate LV
- / on a thin LV

This should allow you to perform the installation - If I do not miss anything

- fabian

>
> Thanks,
> Brian
>
> On Wed, Aug 31, 2016 at 5:28 AM, Fabian Deutsch <fdeut...@redhat.com> wrote:
>> Hey Brian,
>>
>> did you stick to use auto-partitioning when choosing the RAID setup?
>>
>> - fabian
>>
>> On Thu, Aug 25, 2016 at 7:37 PM, Brian Moyer <bdm...@gmail.com> wrote:
>>> When I attempt to install oVirt Node (newest ISO;
>>> ovirt-node-ng-installer-ovirt-4.0-2016062412.iso), the installer fails
>>> at the very end with the following error if any software RAIDs are
>>> defined in storage options.
>>>
>>> There was an error running the kickstart script at line 7 . This is a fatal
>>> error and installation will be aborted. The details of this error are:
>>> [INFO] Trying to create a manageable base from '/'
>>> Traceback (most recent call last):
>>> File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
>>> "__ main __", fname, loader, pkg_name)
>>> File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
>>> exec code in run_globals
>>> File "/usr/lib/python2.7/site-packages/imgbased/__main__.py", line 42,
>>> in 
>>> CliApplication()
>>> File "/usr/lib/ python2.7/site-packages/imgbased/__init__.py", line
>>> 80, in CliApplication
>>> app.hooks.emit("post -arg -parse", args)
>>> File "/usr/lib/python2.7/site-packages/imgbased/hooks.py", line 120, in emit
>>> cb(self.context, •args)
>>> File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", line
>>> 167, in post_argparse
>>> app.imgbase.init_layout_from(args.source, init_nvr)
>>> File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 230,
>>> in init_layout_from
>>> self.init_tags_ on(existing_lv)
>>> File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 217,
>>> in init_tags_on
>>> pool.addtag(self.thinpool_tag)
>>> AttributeError: 'NoneType' object has no attribute 'addtag'
>>>
>>> This occurs with standard RAID volumes, with an LVM volume defined on
>>> top of RAID, and any combination thereof. When the installer is allowed
>>> to pick it's own storage scheme, it works fine. All of my testing has
>>> been done on blank physical disks or newly created virtual disks. The
>>> anaconda and storage logs don't appear to be very useful.
>>>
>>> Has anyone else come across this? Thoughts on workarounds or where I
>>> should be looking next to track down a solution?
>>>
>>> Thanks,
>>> Brian
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> --
>> Fabian Deutsch <fdeut...@redhat.com>
>> RHEV Hypervisor
>> Red Hat



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

2016-08-31 Thread Fabian Deutsch
What do you get for

$ rpm -qa | grep placeholder

$ yum info ovirt-node-ng-image-update


- fabian



On Wed, Aug 31, 2016 at 12:18 PM, Grundmann, Christian <
christian.grundm...@fabasoft.com> wrote:

> Hi,
>
>
>
> node not updated:
>
> rpm -qa |grep ovirt-release
>
> ovirt-release40-4.0.2-2.noarch
>
> ovirt-release-host-node-4.0.2-2.el7.noarch
>
>
>
> grep -ri enabled /etc/yum.repos.d/ovirt-4.0*
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0.repo:enabled=1
>
>
>
>
>
> yum check-update
>
> Loaded plugins: fastestmirror, imgbased-warning
>
> Warning: yum operations are not persisted across upgrades!
>
> Loading mirror speeds from cached hostfile
>
> * ovirt-4.0: ftp.nluug.nl
>
> * ovirt-4.0-epel: epel.besthosting.ua
>
> Obsoleting Packages
>
> ovirt-node-ng-image-update.noarch 4.0.3-1.el7
> ovirt-4.0
>
> ovirt-node-ng-image-update-placeholder.noarch 4.0.1-1.el7
> installed
>
>
>
>
>
> node updated over engine:
>
> rpm -qa |grep ovirt-release
>
> ovirt-release40-pre-4.0.1-1.noarch
>
> ovirt-release-host-node-4.0.1-1.el7.noarch
>
>
>
>   grep -ri enabled /etc/yum.repos.d/ovirt-4.0*
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0-pre.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0-pre.repo:enabled=0
>
> /etc/yum.repos.d/ovirt-4.0.repo:# imgbased: set-enabled
>
> /etc/yum.repos.d/ovirt-4.0.repo:enabled=1
>
>
>
>
>
> yum check-update
>
> Loaded plugins: fastestmirror, imgbased-warning
>
> Warning: yum operations are not persisted across upgrades!
>
> Repository ovirt-4.0-epel is listed more than once in the configuration
>
> Repository ovirt-4.0-centos-gluster37 is listed more than once in the
> configuration
>
> Repository ovirt-4.0-patternfly1-noarch-epel is listed more than once in
> the configuration
>
> Repository virtio-win-stable is listed more than once in the configuration
>
> Repository ovirt-4.0 is listed more than once in the configuration
>
> Loading mirror speeds from cached hostfile
>
> * ovirt-4.0-epel: epel.besthosting.ua
>
>
>
>
>
>
>
> How can I fix it without reinstalling all my nodes?
>
>
>
> Thx Christian
>
>
>
> *Von:* Fabian Deutsch [mailto:fdeut...@redhat.com]
> *Gesendet:* Mittwoch, 31. August 2016 12:08
> *An:* Sandro Bonazzola <sbona...@redhat.com>
> *Cc:* Grundmann, Christian <christian.grundm...@fabasoft.com>; users <
> users@ovirt.org>
>
> *Betreff:* Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?
>
>
>
> On Wed, Aug 31, 2016 at 11:26 AM, Fabian Deutsch <fdeut...@redhat.com>
> wrote:
>
> On Wed, Aug 31, 2016 at 11:23 AM, Sandro Bonazzola <sbona...@redhat.com>
> wrote:
>
>
>
>
>
> On Wed, Aug 31, 2016 at 10:15 AM, Grundmann, Christian <
> christian.grundm...@fabasoft.com> wrote:
>
> Hi,
> I used the iso "ovirt-node-ng-installer-ovirt-4.0-2016082904.iso" from
> http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-
> artifacts-el7-x86_64/
> I attached the nodes in my Engine (4.0.3)
> Engine shows, oVirt Node 4.0.2
> After a few minutes Engine tells me there is a update for the node
> I did the update
> And now the Node is  4.0.1!
>
> How can I get the right updates?
>
>
>
> Fabian, how can this happen?
>
>
>
> Btw, 4.0.3 iso has bee

Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

2016-08-31 Thread Fabian Deutsch
On Wed, Aug 31, 2016 at 11:26 AM, Fabian Deutsch <fdeut...@redhat.com>
wrote:

> On Wed, Aug 31, 2016 at 11:23 AM, Sandro Bonazzola <sbona...@redhat.com>
> wrote:
>
>>
>>
>> On Wed, Aug 31, 2016 at 10:15 AM, Grundmann, Christian <
>> christian.grundm...@fabasoft.com> wrote:
>>
>>> Hi,
>>> I used the iso "ovirt-node-ng-installer-ovirt-4.0-2016082904.iso" from
>>> http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-a
>>> rtifacts-el7-x86_64/
>>> I attached the nodes in my Engine (4.0.3)
>>> Engine shows, oVirt Node 4.0.2
>>> After a few minutes Engine tells me there is a update for the node
>>> I did the update
>>> And now the Node is  4.0.1!
>>>
>>> How can I get the right updates?
>>>
>>
>> Fabian, how can this happen?
>>
>> Btw, 4.0.3 iso has been published yesterday: http://resources.ov
>> irt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ovirt-node
>> -ng-installer-ovirt-4.0-2016083011.iso
>>
>>
> Hey Christian and Sandro,
>
> thanks for reporting this.
> I'm looking into it.
>

So - We did have some problems until Monday where the versions were mixde
up between ovirt-4.0, -pre and -snapshot.
I suppose that this caused the glithc you were seeing, Christian.

I've downloaded
http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/lastSuccessfulBuild/artifact/exported-artifacts/ovirt-node-ng-installer-ovirt-4.0-2016083104.iso

and could not reproduce this issue.

- fabian



>
> - fabian
>
>
>>
>>
>>>
>>>
>>> Thx Christian
>>>
>>>
>>>
>>> -Ursprüngliche Nachricht-
>>> Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im
>>> Auftrag von Fabian Deutsch
>>> Gesendet: Montag, 29. August 2016 10:52
>>> An: Thomas Klute <kl...@ingenit.com>
>>> Cc: users <users@ovirt.org>
>>> Betreff: Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?
>>>
>>> On Wed, Aug 24, 2016 at 2:09 PM, Thomas Klute <kl...@ingenit.com> wrote:
>>> > Dear oVirt community,
>>> >
>>> > what is the correct way to set up a next generation node of the latest
>>> > stable version (4.0.2)?
>>>
>>> Hey Thomas,
>>>
>>> let me get back to this question at the end …
>>>
>>> > Take the image from
>>> > http://resources.ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/
>>> ?
>>> > Seems to be 4.0.0 and then update?
>>>
>>> This is the URL yuo want - It contains the builds based on the latest
>>> stable release.
>>>
>>> Tho I see that it wasn't updated lately.
>>> Sandro, can we publish a new ISO for 4.0.3?
>>>
>>> In the mean time you can take the iso from
>>> http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-a
>>> rtifacts-el7-x86_64/
>>> Which is building the stable isos
>>>
>>> > Or take the image from
>>> > http://resources.ovirt.org/pub/ovirt-4.0-snapshot/iso/
>>> > Seems to be 4.0.2 but nightly and thus unstable?
>>>
>>> Yep, these are nightly builds, and probably unstable.
>>>
>>> - fabian
>>>
>>> > Thanks for the clarification,
>>> > best regards,
>>> >  Thomas
>>> >
>>> > ___
>>> > Users mailing list
>>> > Users@ovirt.org
>>> > http://lists.ovirt.org/mailman/listinfo/users
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> ___
>>> Users mailing list
>>> Users@ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>
>>
>>
>> --
>> Sandro Bonazzola
>> Better technology. Faster innovation. Powered by community collaboration.
>> See how it works at redhat.com
>> <https://www.redhat.com/it/about/events/red-hat-open-source-day-2016>
>>
>
>
>
> --
> Fabian Deutsch <fdeut...@redhat.com>
> RHEV Hypervisor
> Red Hat
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problems installing Ovirt 4.02 Node

2016-08-31 Thread Fabian Deutsch
Hey Christian, a more recent ISO should fix the issue you were seeing back then.

- fabian

On Thu, Aug 4, 2016 at 11:37 AM, Grundmann, Christian
<christian.grundm...@fabasoft.com> wrote:
> Hi,
>
> I installed ovirt-node-ng-installer-ovirt-4.0-2016080104.iso
>
> with default partitioning Layout
>
> with the result after Installation:
>
>
>
> Status: FAILED
>
> Mount points ... FAILED - This can happen if the installation was performed
> incorrectly
>
>   Separate /var ... FAILED - /var got unmounted, or was not setup to use a
> separate volume
>
>   Discard is used ... FAILED - 'discard' mount option was not added or got
> removed
>
> Basic storage ... OK
>
>   Initialized VG ... OK
>
>   Initialized Thin Pool ... OK
>
>   Initialized LVs ... OK
>
> Thin storage ... OK
>
>   Checking available space in thinpool ... OK
>
>   Checking thinpool auto-extend ... OK
>
>
>
> No LV for /var created at all.
>
>
>
> What’s the right way installing an working node?
>
>
>
> Thx a lot
>
> Christian
>
>
>
>
>
> Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von
> Fabian Deutsch
> Gesendet: Mittwoch, 27. Juli 2016 13:25
> An: Peter Michael Calum <pe...@tdc.dk>
> Cc: users@ovirt.org
> Betreff: Re: [ovirt-users] Problems installing Ovirt 4.02 Node
>
>
>
>
>
>
>
> On Wed, Jul 27, 2016 at 7:59 AM, Peter Michael Calum <pe...@tdc.dk> wrote:
>
> Hi,
>
> I tried the changes in /etc/fstab and rebooted.
> Now  imgbase status: OK
>
> But I see this in /var/log/messages after the change :  Starting kdump:
> [FAILED]
>
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: base ***
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: fs-lib ***
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: kdumpbase ***
> Jul 27 07:44:08 khk9dsk34 kernel: device-mapper: table: 253:8: multipath:
> error getting device
> Jul 27 07:44:08 khk9dsk34 kernel: device-mapper: ioctl: error adding target
> to table
> Jul 27 07:44:08 khk9dsk34 multipathd: dm-8: remove map (uevent)
> Jul 27 07:44:08 khk9dsk34 multipathd: dm-8: remove map (uevent)
>
> Jul 27 07:44:08 khk9dsk34 kdumpctl: Bad kdump location: khk9dsg34.ip.tdk.dk
> Jul 27 07:44:09 khk9dsk34 kdumpctl: mkdumprd: failed to make kdump initrd
> Jul 27 07:44:09 khk9dsk34 kdumpctl: Starting kdump: [FAILED]
> Jul 27 07:44:09 khk9dsk34 systemd: kdump.service: main process exited,
> code=exited, status=1/FAILURE
> Jul 27 07:44:09 khk9dsk34 systemd: Failed to start Crash recovery kernel
> arming.
>
> Jul 27 07:44:09 khk9dsk34 systemd: Startup finished in 5.673s (kernel) +
> 8.024s (initrd) + 43.476s (userspace) = 57.173s.
> Jul 27 07:44:09 khk9dsk34 systemd: Unit kdump.service entered failed state.
> Jul 27 07:44:09 khk9dsk34 systemd: kdump.service failed.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting Stop Read-Ahead Data
> Collection...
> Jul 27 07:44:32 khk9dsk34 systemd: Started Stop Read-Ahead Data Collection.
> Jul 27 07:44:32 khk9dsk34 systemd-logind: New session 1 of user root.
> Jul 27 07:44:32 khk9dsk34 systemd: Created slice user-0.slice.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting user-0.slice.
> Jul 27 07:44:32 khk9dsk34 systemd: Started Session 1 of user root.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting Session 1 of user root.
> Jul 27 07:44:45 khk9dsk34 kernel: device-mapper: table: 253:8: multipath:
> error getting device
> Jul 27 07:44:45 khk9dsk34 kernel: device-mapper: ioctl: error adding target
> to table
> Jul 27 07:44:45 khk9dsk34 multipathd: dm-8: remove map (uevent)
> Jul 27 07:44:45 khk9dsk34 multipathd: dm-8: remove map (uevent)
>
> I checked messages in my other hypervisor where /etc/fstab was not modified,
> KDUMP was OK there.
>
> The question about registrating the host in the manager i got solved, it is
> now done from the manager.
> (I come from the Redhat 3.5, and are just started on Ovirt 4)
>
>
>
> Nice that the status issue could be solved.
>
> For adding Node, you can either add the host by gpoing to Engine and then
> add the host, or you can use vdsm register on the host to register it to
> Engine.
>
> - fabian
>
>
>
> Thanks for helping
> Peter
>
> -Oprindelig meddelelse-
> Fra: Giorgio Biacchi [mailto:gior...@di.unimi.it]
> Sendt: 27. juli 2016 00:05
> Til: Peter Michael Calum <pe...@tdc.dk>; users@ovirt.org
> Emne: Re: [ovirt-users] Problems installing Ovirt 4.02 Node
>
>
> On 26/07/2016 08:51, Peter Michael Calum wrote:
>
>>   imgbase status: DEGRADED
>>
>>   Please check the status manually using `imgbase check`
>
> Got the same problem, add 

Re: [ovirt-users] Software RAID installation fails

2016-08-31 Thread Fabian Deutsch
Hey Brian,

did you stick to use auto-partitioning when choosing the RAID setup?

- fabian

On Thu, Aug 25, 2016 at 7:37 PM, Brian Moyer <bdm...@gmail.com> wrote:
> When I attempt to install oVirt Node (newest ISO;
> ovirt-node-ng-installer-ovirt-4.0-2016062412.iso), the installer fails
> at the very end with the following error if any software RAIDs are
> defined in storage options.
>
> There was an error running the kickstart script at line 7 . This is a fatal
> error and installation will be aborted. The details of this error are:
> [INFO] Trying to create a manageable base from '/'
> Traceback (most recent call last):
> File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main
> "__ main __", fname, loader, pkg_name)
> File "/usr/lib64/python2.7/runpy.py", line 72, in _run_code
> exec code in run_globals
> File "/usr/lib/python2.7/site-packages/imgbased/__main__.py", line 42,
> in 
> CliApplication()
> File "/usr/lib/ python2.7/site-packages/imgbased/__init__.py", line
> 80, in CliApplication
> app.hooks.emit("post -arg -parse", args)
> File "/usr/lib/python2.7/site-packages/imgbased/hooks.py", line 120, in emit
> cb(self.context, •args)
> File "/usr/lib/python2.7/site-packages/imgbased/plugins/core.py", line
> 167, in post_argparse
> app.imgbase.init_layout_from(args.source, init_nvr)
> File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 230,
> in init_layout_from
> self.init_tags_ on(existing_lv)
> File "/usr/lib/python2.7/site-packages/imgbased/imgbase.py", line 217,
> in init_tags_on
> pool.addtag(self.thinpool_tag)
> AttributeError: 'NoneType' object has no attribute 'addtag'
>
> This occurs with standard RAID volumes, with an LVM volume defined on
> top of RAID, and any combination thereof. When the installer is allowed
> to pick it's own storage scheme, it works fine. All of my testing has
> been done on blank physical disks or newly created virtual disks. The
> anaconda and storage logs don't appear to be very useful.
>
> Has anyone else come across this? Thoughts on workarounds or where I
> should be looking next to track down a solution?
>
> Thanks,
> Brian
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

2016-08-31 Thread Fabian Deutsch
On Wed, Aug 31, 2016 at 11:23 AM, Sandro Bonazzola <sbona...@redhat.com>
wrote:

>
>
> On Wed, Aug 31, 2016 at 10:15 AM, Grundmann, Christian <
> christian.grundm...@fabasoft.com> wrote:
>
>> Hi,
>> I used the iso "ovirt-node-ng-installer-ovirt-4.0-2016082904.iso" from
>> http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-a
>> rtifacts-el7-x86_64/
>> I attached the nodes in my Engine (4.0.3)
>> Engine shows, oVirt Node 4.0.2
>> After a few minutes Engine tells me there is a update for the node
>> I did the update
>> And now the Node is  4.0.1!
>>
>> How can I get the right updates?
>>
>
> Fabian, how can this happen?
>
> Btw, 4.0.3 iso has been published yesterday: http://resources.
> ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ovirt-
> node-ng-installer-ovirt-4.0-2016083011.iso
>
>
Hey Christian and Sandro,

thanks for reporting this.
I'm looking into it.

- fabian


>
>
>>
>>
>> Thx Christian
>>
>>
>>
>> -Ursprüngliche Nachricht-
>> Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag
>> von Fabian Deutsch
>> Gesendet: Montag, 29. August 2016 10:52
>> An: Thomas Klute <kl...@ingenit.com>
>> Cc: users <users@ovirt.org>
>> Betreff: Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?
>>
>> On Wed, Aug 24, 2016 at 2:09 PM, Thomas Klute <kl...@ingenit.com> wrote:
>> > Dear oVirt community,
>> >
>> > what is the correct way to set up a next generation node of the latest
>> > stable version (4.0.2)?
>>
>> Hey Thomas,
>>
>> let me get back to this question at the end …
>>
>> > Take the image from
>> > http://resources.ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ ?
>> > Seems to be 4.0.0 and then update?
>>
>> This is the URL yuo want - It contains the builds based on the latest
>> stable release.
>>
>> Tho I see that it wasn't updated lately.
>> Sandro, can we publish a new ISO for 4.0.3?
>>
>> In the mean time you can take the iso from http://jenkins.ovirt.org/job/o
>> virt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/
>> Which is building the stable isos
>>
>> > Or take the image from
>> > http://resources.ovirt.org/pub/ovirt-4.0-snapshot/iso/
>> > Seems to be 4.0.2 but nightly and thus unstable?
>>
>> Yep, these are nightly builds, and probably unstable.
>>
>> - fabian
>>
>> > Thanks for the clarification,
>> > best regards,
>> >  Thomas
>> >
>> > ___
>> > Users mailing list
>> > Users@ovirt.org
>> > http://lists.ovirt.org/mailman/listinfo/users
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
>
>
> --
> Sandro Bonazzola
> Better technology. Faster innovation. Powered by community collaboration.
> See how it works at redhat.com
> <https://www.redhat.com/it/about/events/red-hat-open-source-day-2016>
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

2016-08-29 Thread Fabian Deutsch
On Wed, Aug 24, 2016 at 2:09 PM, Thomas Klute  wrote:
> Dear oVirt community,
>
> what is the correct way to set up a next generation node of the latest
> stable version (4.0.2)?

Hey Thomas,

let me get back to this question at the end …

> Take the image from
> http://resources.ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ ?
> Seems to be 4.0.0 and then update?

This is the URL yuo want - It contains the builds based on the latest
stable release.

Tho I see that it wasn't updated lately.
Sandro, can we publish a new ISO for 4.0.3?

In the mean time you can take the iso from
http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/
Which is building the stable isos

> Or take the image from
> http://resources.ovirt.org/pub/ovirt-4.0-snapshot/iso/
> Seems to be 4.0.2 but nightly and thus unstable?

Yep, these are nightly builds, and probably unstable.

- fabian

> Thanks for the clarification,
> best regards,
>  Thomas
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problems installing Ovirt 4.02 Node

2016-07-27 Thread Fabian Deutsch
On Wed, Jul 27, 2016 at 7:59 AM, Peter Michael Calum  wrote:

> Hi,
>
> I tried the changes in /etc/fstab and rebooted.
> Now  imgbase status: OK
>
> But I see this in /var/log/messages after the change :  Starting kdump:
> [FAILED]
>
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: base ***
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: fs-lib ***
> Jul 27 07:44:08 khk9dsk34 dracut: *** Including module: kdumpbase ***
> Jul 27 07:44:08 khk9dsk34 kernel: device-mapper: table: 253:8: multipath:
> error getting device
> Jul 27 07:44:08 khk9dsk34 kernel: device-mapper: ioctl: error adding
> target to table
> Jul 27 07:44:08 khk9dsk34 multipathd: dm-8: remove map (uevent)
> Jul 27 07:44:08 khk9dsk34 multipathd: dm-8: remove map (uevent)
>
> Jul 27 07:44:08 khk9dsk34 kdumpctl: Bad kdump location:
> khk9dsg34.ip.tdk.dk
> Jul 27 07:44:09 khk9dsk34 kdumpctl: mkdumprd: failed to make kdump initrd
> Jul 27 07:44:09 khk9dsk34 kdumpctl: Starting kdump: [FAILED]
> Jul 27 07:44:09 khk9dsk34 systemd: kdump.service: main process exited,
> code=exited, status=1/FAILURE
> Jul 27 07:44:09 khk9dsk34 systemd: Failed to start Crash recovery kernel
> arming.
>
> Jul 27 07:44:09 khk9dsk34 systemd: Startup finished in 5.673s (kernel) +
> 8.024s (initrd) + 43.476s (userspace) = 57.173s.
> Jul 27 07:44:09 khk9dsk34 systemd: Unit kdump.service entered failed state.
> Jul 27 07:44:09 khk9dsk34 systemd: kdump.service failed.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting Stop Read-Ahead Data
> Collection...
> Jul 27 07:44:32 khk9dsk34 systemd: Started Stop Read-Ahead Data Collection.
> Jul 27 07:44:32 khk9dsk34 systemd-logind: New session 1 of user root.
> Jul 27 07:44:32 khk9dsk34 systemd: Created slice user-0.slice.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting user-0.slice.
> Jul 27 07:44:32 khk9dsk34 systemd: Started Session 1 of user root.
> Jul 27 07:44:32 khk9dsk34 systemd: Starting Session 1 of user root.
> Jul 27 07:44:45 khk9dsk34 kernel: device-mapper: table: 253:8: multipath:
> error getting device
> Jul 27 07:44:45 khk9dsk34 kernel: device-mapper: ioctl: error adding
> target to table
> Jul 27 07:44:45 khk9dsk34 multipathd: dm-8: remove map (uevent)
> Jul 27 07:44:45 khk9dsk34 multipathd: dm-8: remove map (uevent)
>
> I checked messages in my other hypervisor where /etc/fstab was not
> modified, KDUMP was OK there.
>
> The question about registrating the host in the manager i got solved, it
> is now done from the manager.
> (I come from the Redhat 3.5, and are just started on Ovirt 4)
>
>
Nice that the status issue could be solved.

For adding Node, you can either add the host by gpoing to Engine and then
add the host, or you can use vdsm register on the host to register it to
Engine.

- fabian


> Thanks for helping
> Peter
>
> -Oprindelig meddelelse-
> Fra: Giorgio Biacchi [mailto:gior...@di.unimi.it]
> Sendt: 27. juli 2016 00:05
> Til: Peter Michael Calum ; users@ovirt.org
> Emne: Re: [ovirt-users] Problems installing Ovirt 4.02 Node
>
> On 26/07/2016 08:51, Peter Michael Calum wrote:
>
> >   imgbase status: DEGRADED
> >
> >   Please check the status manually using `imgbase check`
>
> Got the same problem, add discard option to fstab for / and /var like this:
>
> #
> # /etc/fstab
> # Created by anaconda on Fri Jul 22 11:08:40 2016 # # Accessible
> filesystems, by reference, are maintained under '/dev/disk'
> # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more
> info #
> /dev/HostVG/ovirt-node-ng-4.0.2-0.20160721.0+1 / ext4 defaults,discard 1 1
> UUID=a96d5a4c-bc4b-481c-bf6e-af47318d8b7b /boot   ext4
>   defaults1 2
> /dev/mapper/HostVG-var  /varext4defaults,discard 1
> 2
> /dev/mapper/HostVG-swap swapswapdefaults0 0
>
> then remount or reboot.
>
> >
> > Another question : Where do I define the Ovirt manager address.
>
> For this one I can't help, but you can add the new host from the manager..
>
> >
> >
> >
> > Venlig hilsen / Kind regards
> >
> > *Peter Calum *
> >
> > Tlf: +45 66 69 36 82
> > Mobil: +45 40 41 71 85
> > E-mail pe...@tdc.dk 
> >
> >
> > TDC Group
> > Teknologi & Kapacitet
> > Systemer, OTMS
> > Teglholmsgade 1,
> > F-059 2450 København SV
> >
> >
> >
> >
> >
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Node 3.6

2016-05-17 Thread Fabian Deutsch
On Mon, May 16, 2016 at 2:09 PM, Anantha Raghava
<rag...@exzatechconsulting.com> wrote:
> Hi,
>
> I attempted to download the oVirt Node 3.6 from
> http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-iso/ and I
> also find there is another ovirt-node-ng. Which one should we download.
>
> I downloaded the one at
> http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-iso/, but
> this iso file seems to have an issue. Although it boots the server properly
> at around 66% into installation, the installer throws up an error - I/O
> error, file not found or some thing of this sort. Installation doesn't go
> forward at all. We have to power off the server, reboot with CentOS DVD
> install using yum local install command.
>
> Are these files proper? Which one should we use?

Hey Anantha,

please use the latest iso from:
http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-ng-installer-ovirt/

http://resources.ovirt.org/pub/ovirt-3.6-snapshot/iso/ovirt-node-iso/
is our vintage image, and it has known problems with some storage
setups.

Let me know if ovirt-node-ng-installer-ovirtworks for yuo.

Greetings
- fabian

> --
>
> Thanks & Regards,
>
>
> Anantha Raghava
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] [ANN] oVirt Node Next Beta

2016-04-27 Thread Fabian Deutsch
Hey,

the just released oVirt 3.6.6rc1 release marks the first official oVirt release
which is accompanied by oVirt Node Next (Beta).

Since it's pre-alpha release a few weeks ago, Node has seen a lot of testing
and fixes, which brought it to the beta level.

If you have not yet started to test oVirt Node Next, this is the time to do so.
Take a look at the quick-start guide to see the next steps [0].

What is oVirt Node?
oVirt Node is a ready-to-use OS image, containing all the OS and oVirt packages
needed to act as host for oVirt Engine.
The image can be installed in minutes, can be administered using Cockpit [1],
and provides a safe upgrade and rollback mechanism.

Where can I learn more about oVirt Node?
A quick-start guide, and links to additional documentation can be found on the
oVirt Node Project page .

On behalf of the Node team
- fabian

--
[0] http://www.ovirt.org/node/
[1] http://cockpit-project.org/
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cleanup Ovirt Node

2016-04-12 Thread Fabian Deutsch
Heya,

I am not sure if you want to uninstall/remove a node - then you need
to clear the storage - or if you want to reset it - in this case I'd
recommend to reinstall.

- fabian

On Mon, Apr 11, 2016 at 3:27 PM, Marcelo Leandro <marcelol...@gmail.com> wrote:
> Good Morning ,
> how do I clear the configurations of oVirt node?
>
> Thanks,
>
> Marcelo Leandro
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Node Next builds are currently broken

2016-03-31 Thread Fabian Deutsch
Hey,

just a quick heads up that our oVirt Node Next jenkins builds
are currently broken.
Some of the symptoms are that the installation is failing and
that no new updates are available.

We are working on a solution.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Ovirt Engine Appliance

2016-03-29 Thread Fabian Deutsch
Hey John,

no - we only build the appliance based on CentOS 7

- fabian

On Tue, Mar 29, 2016 at 2:54 PM, John Nguyen <jtq...@gmail.com> wrote:
> Hi guys,
>
> I was wondering if there is a version of the Ovirt Engine Appliance for
> RHEL6.7?
>
> The documentation is Git has the builds for RHEL/CentOS 7 or higher.
>
> Thanks,
> John
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt 3.6 node

2016-03-07 Thread Fabian Deutsch
Hey Johan,

you can find the latest ISO here:
http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.6_create-iso-el7_merged/

- fabian

On Sun, Mar 6, 2016 at 3:13 PM, Johan Kooijman <m...@johankooijman.com> wrote:
> Hi all,
>
> I can't seem to find ovirt 3.6 node ISO. Is there a specific reason for
> this? I have the issue with 3.5 (ovirt-node-iso-3.5-0.201502231653.el7.iso)
> that I can't do live merge on machines installed with ovirt node.
>
> --
> Met vriendelijke groeten / With kind regards,
> Johan Kooijman
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] OVirt Node / RHEV-H and Multiple NICs/bond

2016-02-24 Thread Fabian Deutsch
Hey Christopher,

On Tue, Feb 23, 2016 at 8:29 PM, Christopher Young
<mexigaba...@gmail.com> wrote:
> So, I have what I think should be a standard setup where I have
> dedicated NICs (to be bonded via LACP for storage) and well are NICs
> for various VLANS, etc.
>
> As typical, I have the main system interfaces for the usual system IPs
> (em1 in this case).
>
> A couple of observations (and a "chicken and the egg problem"):
>
> #1.  The RHEV-H/Ovirt-Node interface doesn't allow you to configure
> more than one interface.  Why is this?

This is by design. The idea is that you use the TUI to configure the
initial NIC, all subsequent configuration will be done trough Engine.

> #2.  This prevents me from bringing up an interface for access to my
> Netapp SAN (which I keep on separate networking/VLANs for
> best-practices purposes)
>
> If I'm unable to bring up a regular system interface AND an interface
> for my storage, then how am I going to be able to install a RHEV-M
> (engine) hosted-engine VM since I would be either unable to have an
> interface for this VM's IP AND be able to connect to my storage
> network.
>
> In short, I'm confused.  I see this as a very standard enterprise
> setup so I feel like I must be missing something obvious.  If someone
> could educate me, I'd really appreciate it.
>

This is a valid point - you can not configure Ndoe from the TUI to
connect to more than two networks.

What you can do however is to temporarily setup a route between the
two networks to bootstrap Node. After setup you can use Engine to
configure another nic on Node to access the storage network.

The other option I see is to drop to shell and manually configure the
second NIC by creating an ifcfg file.

Note: In future we plan that you can use Cockpit to configure
networking - this will also allow you to configure multiple NICs.

Greetings
- fabian

> Thanks,
> CHris
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] RHEV-H 7.2 Beta Install

2016-02-24 Thread Fabian Deutsch
On Tue, Feb 23, 2016 at 5:32 PM, Christopher Young
<mexigaba...@gmail.com> wrote:
> I know this is the ovirt-list, but I've had great success with help
> here as I have been running a couple of ovirt instances for some time
> (as part of a lab/testing).
>
> In any case, I'm trying to install the RHEV-H beta (7.2 latest ISO),
> and for whatever reason, my install gets to 22% (right after
> partitioning up the local drive, I believe) and fails.
>
> I have no idea how to troubleshoot this.  I've tried changing install
> options (i've been installing via PXE) to no avail, and I notice that
> there don't appear to be any virtual terminals to switch to look at
> things and/or see where things failed.
>
> The errors that I get say something along the lines of:
>
> unexpected EOF while looking for matching ''
>
> I'll try and get more details, but i've attached a screenshot from the 
> console.

Hey Christoph,

first thanks for the report.

> Any help on HOW to troubleshoot this, pull logs, etc.. would be most
> appreciated as I'd like to get this moving forward.

As Ryan wrote, you need to drop to shell, then all logs are in /var/log.

The problem seems to be an old code fragment which assumes sysV init scripts.
I wonder why we did not encounter it earlier.

Could you file a bug about this issue?

- fabian

> Thanks for all of your hard work and the help of the community!
>
> -- Chris
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Release Date for Ovirt-node 3.6?

2016-01-11 Thread Fabian Deutsch
On Fri, Dec 18, 2015 at 3:44 PM, Timothy Burger  wrote:
> Is there any word on a release date for a final ovirt-node 3.6?

Hey Timothy,

oVirt Node 3.6 is now silently released continuously.
See http://www.ovirt.org/Node for links to the right Jenkins job for
retrieving the latest Node iso.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] how to get infos about dev of ovirt 4.0

2016-01-08 Thread Fabian Deutsch
On Fri, Jan 8, 2016 at 12:22 PM, Nathanaël Blanchet  wrote:
> Since meetings have been canceled (and reports), I find it difficult for
> community to get informations about the development state of ovirt.
> How and where can we follow the release management, in particular for 4.0,
> i.e. the new integrated features, the blocking bugs, etc... I didn't find
> any documents like the one that was used for previous release
> (http://goo.gl/9X3G49)

Hey Nathanaël,

were you following any specific meetings?

- fabian

> --
> Nathanaël Blanchet
>
> Supervision réseau
> Pôle Infrastrutures Informatiques
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5
> Tél. 33 (0)4 67 54 84 55
> Fax  33 (0)4 67 54 84 14
> blanc...@abes.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] New oVirt Node releases?

2015-12-22 Thread Fabian Deutsch
On Mon, Dec 21, 2015 at 6:18 PM, Kevin Hung  wrote:
> Hello,
>
> I have noticed that there have not been any official releases of oVirt Node
> since 3.5.2 [1]. I have tried looking through the Users and the Announce
> mailing lists for any information regarding the lack of releases, but I was
> not able to find anything from the past few months. The official
> documentation for oVirt seems to indicate that oVirt Node is still
> supported.
>
> Are there just build problems preventing oVirt Node from being released? Or
> are we supposed to use either the latest Jenkins build or our own build [2]
> if we wish to deploy oVirt Node?

Hey Kevin.

In the last months we went over to only release oVirt Node through Jenkins [3].

The main reasons is that the Node team was focused on stabilizing
Node, instead of improving the release process.

For the old isos in [1] - We should probably remove them and point to
the continous builds.

I've also updated the links on the main Node landing page:
http://www.ovirt.org/Category:Node

Greetings
- fabian

[3] http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.6_create-iso-el7_merged/

> [1] http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-node/el7-3.5.2/
> [2] http://www.ovirt.org/Node_Building
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problem with hosted engine setup - vsdmd does not start

2015-12-16 Thread Fabian Deutsch
On Wed, Dec 16, 2015 at 10:52 PM, Willard Dennis <wden...@nec-labs.com> wrote:
> Any thoughts on this issue?? This is holding up my project (oVirt hosted
> engine install won’t proceed if VDSM service is not running…)  Why am I even
> having such problems with the VDSM service? It’s on a vanilla CentOS 7
> install…

Hey,

so it looks like vdsm has an issue, can you provide some logs?

- fabian

> Thanks
> Will
>
>
> On Dec 2, 2015, at 10:35 AM, Will Dennis <wden...@nec-labs.com> wrote:
>
> Ran the configure the first time and got an error...
>
> root@ovirt-node-01 ~> vdsm-tool configure --force
>
> Checking configuration status...
>
> Current revision of multipath.conf detected, preserving
> libvirt is not configured for vdsm yet
> FAILED: conflicting vdsm and libvirt-qemu tls configuration.
> vdsm.conf with ssl=True requires the following changes:
> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1
> qemu.conf: spice_tls=1.
>
> Running configure...
> Reconfiguration of sebool is done.
> Reconfiguration of passwd is done.
> Reconfiguration of libvirt is done.
>
> Done configuring modules to VDSM.
>
> So, made the appropriate edits to libvirtd.conf and qemu.conf
>
> root@ovirt-node-01 ~> grep "^[a-z]" /etc/libvirt/libvirtd.conf
> listen_tls = 1
> listen_tcp = 0
> auth_tcp = "sasl"
> auth_unix_rw="sasl"
> ca_file="/etc/pki/vdsm/certs/cacert.pem"
> cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
> host_uuid="2b026fff-bae2-429f-9386-c60ffc5f3f32"
> keepalive_interval=-1
> key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
> unix_sock_group="qemu"
> unix_sock_rw_perms="0770"
>
> root@ovirt-node-01 ~> grep "^[a-z]" /etc/libvirt/qemu.conf
> spice_tls = 1
> auto_dump_path="/var/log/core"
> dynamic_ownership=0
> lock_manager="sanlock"
> remote_display_port_max=6923
> remote_display_port_min=5900
> save_image_format="lzop"
> spice_tls=1
> spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
>
> Then re-ran the config...
>
> root@ovirt-node-01 ~> vdsm-tool configure --force
>
> Checking configuration status...
>
> Current revision of multipath.conf detected, preserving
> libvirt is already configured for vdsm
> SUCCESS: ssl configured to true. No conflicts
>
> Running configure...
> Reconfiguration of sebool is done.
> Reconfiguration of libvirt is done.
>
> Done configuring modules to VDSM.
>
> Sadly, vdsmd STILL fails to start...
>
> root@ovirt-node-01 ~> systemctl restart vdsmd
> root@ovirt-node-01 ~> systemctl status vdsmd
> vdsmd.service - Virtual Desktop Server Manager
>Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled)
>Active: activating (auto-restart) (Result: exit-code) since Wed
> 2015-12-02 10:30:47 EST; 1s ago
>   Process: 6522 ExecStopPost=/usr/libexec/vdsm/vdsmd_init_common.sh
> --post-stop (code=exited, status=0/SUCCESS)
>   Process: 6506 ExecStart=/usr/share/vdsm/daemonAdapter -0 /dev/null -1
> /dev/null -2 /dev/null /usr/share/vdsm/vdsm (code=exited, status=1/FAILURE)
>   Process: 6433 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
> --pre-start (code=exited, status=0/SUCCESS)
> Main PID: 6506 (code=exited, status=1/FAILURE)
>
> Dec 02 10:30:47 ovirt-node-01 systemd[1]: Unit vdsmd.service entered failed
> 
> Dec 02 10:30:47 ovirt-node-01 systemd[1]: vdsmd.service holdoff time over,
> s
> Hint: Some lines were ellipsized, use -l to show in full.
>
> :(
>
> From: Simone Tiraboschi [mailto:stira...@redhat.com]
> Sent: Wednesday, December 02, 2015 3:57 AM
> To: Will Dennis
> Cc: Fabian Deutsch; users
> Subject: Re: [ovirt-users] Problem with hosted engine setup - vsdmd does not
> start
>
> [snip]
>
> Now can you please now configure it with:
>   vdsm-tool configure --force
>
> Then you have to restart it
>
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] How To: Node Hosted-Engine with less then 16GB

2015-12-14 Thread Fabian Deutsch
On Thu, Dec 10, 2015 at 6:29 PM, Alain Gilmor <alain.gil...@geemedia.com> wrote:
> Thanks for the reply Fabien.  I had to un-sub because I was getting too much 
> mail.
>
>
> ovirt-node-iso-3.6-0.999.201511061021.el7.centos.iso
>
> ovirt-engine-appliance-20151104.0-1.el7.centos.ova  (extracted from 
> ovirt-hosted-engine-appliance RPM as described)

Ah yes, both builds were quite old.

If you want to give it another try, I'd suggest you try out some
builds which are not older than a week, they should be working much
better.

> I would love if the Node TUI could default to a HTTP hosted OVA instead of 
> requiring me to extract, place it on a webserver.

You mean, it should default to the i.e. jenkins url?

Our experience was that it was quite unreliable to pull ~3GB of data
from the internet, thus we recommend to download the OVA and host it
manually.

- fabian

> I tried both the TUI method, and dropping to root & running the command line 
> node-hosted-engine setup.  Always ended up with 16GB.
>
>
> =)  cheers
>
> ____
> From: Fabian Deutsch <fdeut...@redhat.com>
> Sent: December 10, 2015 8:38 AM
> To: Alain Gilmor
> Cc: users@ovirt.org
> Subject: Re: [ovirt-users] How To: Node Hosted-Engine with less then 16GB
>
> On Thu, Dec 3, 2015 at 6:23 PM, Alain Gilmor <alain.gil...@geemedia.com> 
> wrote:
>> Here’s a short guide for people having trouble setting up Hosted-Engine
>> using only Ovirt Nodes.   Anything to do with ‘ jenkins’ OVA did not work
>> for me, size mismatch, etc.
>
> Hey Alain,
>
> a quite late reply, but still ..
>
> Thzat's annoying, can you tell what Node builld you used?
> We have seen this problem, and it shoul dhave been fixed lately.
>
>> Anytime I tried to deploy the Hosted-Engine via the Node TUI, I was not
>> prompted to adjust the amount of RAM the Hosted-Engine VM takes.  (default
>> 16GB).   After the deploy setup, the Hosted-Engine VM would not boot.
>>
>> When using a regular Ovirt host to deploy the Hosted-Engine, I was prompted
>> to adjust the RAM for the Hosted Engine!
>>
>>
>>
>> Solution  :
>>
>> Install ovirt-engine RPMs on “host1”.
>>
>> Install ovirt-hosted-engine-appliance RPM. Copy its OVA from
>> /usr/share/ovirt-engine-appliance/  to your webserver
>>
>> Run hosted-engine –deploy from “host1”.  Adjust the RAM to 4096.
>> Run the Hosted-Engine deploy from Node.  Let it SCP the config from “host1”
>>
>> Reboot Host1 as make it another Node.
>
> Nice guide!
>
> - fabian
>
>
> --
> Fabian Deutsch <fdeut...@redhat.com>
> RHEV Hypervisor
> Red Hat



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] How To: Node Hosted-Engine with less then 16GB

2015-12-10 Thread Fabian Deutsch
On Thu, Dec 3, 2015 at 6:23 PM, Alain Gilmor <alain.gil...@geemedia.com> wrote:
> Here’s a short guide for people having trouble setting up Hosted-Engine
> using only Ovirt Nodes.   Anything to do with ‘ jenkins’ OVA did not work
> for me, size mismatch, etc.

Hey Alain,

a quite late reply, but still ..

Thzat's annoying, can you tell what Node builld you used?
We have seen this problem, and it shoul dhave been fixed lately.

> Anytime I tried to deploy the Hosted-Engine via the Node TUI, I was not
> prompted to adjust the amount of RAM the Hosted-Engine VM takes.  (default
> 16GB).   After the deploy setup, the Hosted-Engine VM would not boot.
>
> When using a regular Ovirt host to deploy the Hosted-Engine, I was prompted
> to adjust the RAM for the Hosted Engine!
>
>
>
> Solution  :
>
> Install ovirt-engine RPMs on “host1”.
>
> Install ovirt-hosted-engine-appliance RPM. Copy its OVA from
> /usr/share/ovirt-engine-appliance/  to your webserver
>
> Run hosted-engine –deploy from “host1”.  Adjust the RAM to 4096.
> Run the Hosted-Engine deploy from Node.  Let it SCP the config from “host1”
>
> Reboot Host1 as make it another Node.

Nice guide!

- fabian


-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problem with hosted engine setup - vsdmd does not start

2015-11-30 Thread Fabian Deutsch
On Tue, Dec 1, 2015 at 4:52 AM, Will Dennis <wden...@nec-labs.com> wrote:
> Any clues out of the strace of vdsm?

read(9, "sudo: a password is required\n", 4096) = 29

Could it be that sudo is not configured to operate passwordless?

The strat-up can then fail, because sudo requires a ty, but this isn't
available during service start.

- fabian



> From: Willard Dennis [mailto:wden...@nec-labs.com]
> Sent: Wednesday, November 25, 2015 12:58 PM
> To: Simone Tiraboschi
> Cc: users
> Subject: Re: [ovirt-users] Problem with hosted engine setup - vsdmd does not
> start
>
>
>
> strace output:
>
> https://gist.githubusercontent.com/wdennis/d9913d8064af6a6b2c36/raw/6a33f7d9ba7da72ff9be7a15e2e81e5d06ad0fc5/vdsm-strace.txt
>
>
>
>
>
> On Nov 25, 2015, at 11:29 AM, Simone Tiraboschi <stira...@redhat.com> wrote:
>
>
>
>
>
>
>
> On Wed, Nov 25, 2015 at 5:22 PM, Willard Dennis <wden...@nec-labs.com>
> wrote:
>
> [root@ovirt-node-01 ~]# sudo -u vdsm /bin/bash
>
> bash-4.2$ /usr/share/vdsm/vdsm
>
> bash-4.2$ echo $?
>
> 1
>
>
>
> Can you please use strace on it?
>
>
>
>
>
> On Nov 25, 2015, at 11:16 AM, Simone Tiraboschi <stira...@redhat.com> wrote:
>
>
>
>
>
> On Wed, Nov 25, 2015 at 5:09 PM, Willard Dennis <wden...@nec-labs.com>
> wrote:
>
>
>
> On Nov 25, 2015, at 10:37 AM, Simone Tiraboschi <stira...@redhat.com> wrote:
>
>
>
>
>
>
>
> On Wed, Nov 25, 2015 at 4:20 PM, Will Dennis <wden...@nec-labs.com> wrote:
>
> Hi Simone,
>
> Looks like the vdsm log is empty...
>
> [root@ovirt-node-01 ~]# ls -l /var/log/vdsm/vdsm.log
> -rw-r--r-- 1 vdsm kvm 0 Nov 23 15:41 /var/log/vdsm/vdsm.log
>
> Yes, I did execute the ‘vdsm-tool configure –force’ command before the
> restart, looks like it worked OK, but still the same problem with starting
> vdsm...
>
>
>
>
>
> Can you please try manually run /usr/share/vdsm/vdsm as vdsm user?
>
>
>
>
>
> [root@ovirt-node-01 ~]# su - vdsm
>
> This account is currently not available.
>
> [root@ovirt-node-01 ~]#
>
> [root@ovirt-node-01 ~]# grep vdsm /etc/passwd
>
> vdsm:x:36:36:Node Virtualization Manager:/var/lib/vdsm:/sbin/nologin
>
> [root@ovirt-node-01 ~]# runuser -l vdsm -c '/usr/share/vdsm/vdsm'
>
> This account is currently not available.
>
>
>
>
>
> [root@tiramd1 ~]# sudo -u vdsm /bin/bash
>
> bash-4.2$ whoami
>
> vdsm
>
>
>
>
>
>
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt 4.0 wishlist: oVirt Node

2015-11-24 Thread Fabian Deutsch
On Fri, Nov 20, 2015 at 1:54 PM, Giuseppe Ragusa
 wrote:
> Hi all,
> I'm trying to organize my wishes/hopes for oVirt 4.0
>
> These items derive from both solitary mumblings and community talks at the 
> the first Italian oVirt Meetup.
>
> I offer to help in coding (work/family schedules permitting) but keep in mind 
> that I'm a sysadmin with mainly C and bash-scripting skills (but hoping to 
> improve my less-than-newbie Python too...)
>
> Since I have related interests/wishes also for Engine and VDSM, I'll send a 
> separate message for each one.

Giuseppe,

this is a nice compilation of wishes!

> Let's start from the oVirt Node:
>
> *) oVirt Node complete convergence with Atomic Host: start from Project 
> Atomic tools and define an ISO-installable Atomic Host variant [1] to include 
> gluster, qemu, libvirt, vdsm and all the packages/configurations that an 
> oVirt Node would need (remove unneeded parts)

That's a nice idea and we actually actively investigated to use Atomic Host.
Atomic is pretty strong on quickly building and deploying trees. It
also provides the nice features to rollback in case of accidents, and
also has a vibrant community.
But we encountered a few issues i.e. Atomic has tough requirements on
how the root filesystem must look, and how packages can touch/change
the root file-system. Besides that we were seeing issues when it comes
to support a wider range of (multipathed) storage hardware. To just
name two issues.

So for now we don't aim to build Node an the foundations of Atomic.

But we are working on an approach which is similar to Atomic and
allows us to address some long standing issues and make Node much
easier to use, maintain, and customize.

Stay tuned for news on the Node development road-map.

> *) add oVirt Node ability to host containers (independent of the above 
> mentioned convergence with Atomic); note that Atomic Host has 
> Docker/Kubernetes, but libvirt already has a LXC driver [2] and the Engine 
> could benefit from some added smartness in managing groups of guests etc. in 
> the vm case too; there are related wishlist items on configuring/managing 
> containers on the Engine and on VDSM

Actually a good point which I also had on my mind.
The main focus of Node will be to host VMs, but having basic container
support to host containers for supporting a feature is surely
something interesting.

> *) add Open vSwitch direct support (not Neutron-mediated); there are related 
> wishlist items on configuring/managing Open vSwitch on the Engine and on VDSM

This will need work on the vdsm side before it makes sense to pull
this into Node.

> *) add oVirt Node ability to fully perform as a stand-alone hypervisor: I 
> hear that Cockpit is coming, so why not Kimchi too? ;)

Yep, Cockpit will be part of the game on Node.
Kimchi might be problematic - not because of Node - but because of the
way how libvirtd is tuned towards vdsm.
The last time I looked the issue was that libvirtd is not consumable
by kimchi anymore, once vdsm has configured it.
And to me it looks like this does not really fit anyway right now,
because the current assumption is that Engine has the full control
over VMs - and this would be not true anymore if you could use kimchi
to administer your VMs.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] time zone in ovirt node

2015-11-20 Thread Fabian Deutsch
On Fri, Nov 20, 2015 at 7:47 AM, Budur Nagaraju  wrote:
> HI
>
> How to set time zone in ovirt node ? am using ovirt version 3.5.

Currently the TUI does not provide a way to set a timezone.

You can however drop to shell and configure the timezone on the console.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] ovirt-shell - Polling or also events?

2015-11-08 Thread Fabian Deutsch
Hey,

does somebody know if ovirt-shell can also wait (block) for properties
of an object to change, i.e.:

ovirt-shell wait --query "status-state=installed"

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Node

2015-10-21 Thread Fabian Deutsch
On Tue, Oct 20, 2015 at 4:55 PM, Patrick Russell
<patrick_russ...@volusion.com> wrote:
> We had this same issue after 3.5.2 and I forget the reason why the official
> build hasn’t been released, but we were pointed in the direction of using
> the nightly build from Jenkins:
>
> http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/

Yep this is the correct link.
Due to space requirements we settled with only providing the builds
through jenkins.

> I can vouch that ovirt-node-iso-3.5-0.999.201510062311.el7.centos is stable.

Nice to hear that it works stable for you :)

- fabian

> -Patrick
>
> On Oct 20, 2015, at 4:53 AM, Massimo Mad <mad196...@gmail.com> wrote:
>
> Hi,
> I want to migrate my hosts from centos centoes 6.x to 7.x and at the same
> time move from a normal installation centos with then installed oVirt to
> oVirt node.
> But I noticed that there is not always the latest release of oVirt node, for
> example, the latest version of oVirt node is 3.5.2 and the latest version of
> oVirt is 3.5.4.
> Where can I find the latest release of oVirt node, or there is a kickstart
> to create the hosts.
> Regards
> Massimo
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Issues while deploying

2015-09-11 Thread Fabian Deutsch
On Fri, Sep 11, 2015 at 11:33 AM, Alon Bar-Lev  wrote:
>
> Indeed.
> Fabian, where is the 3.5 node iso located?
> Should be at[1], right?

Yes, it should be there, but we are missing some publishers.

In the mean time, please retrieve the Node iso from:
http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/
or
http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el6_merged/

- fabian

> [1] http://resources.ovirt.org/pub/ovirt-3.5/iso/
>
> - Original Message -
>> From: "Budur Nagaraju" 
>> To: "Alon Bar-Lev" 
>> Cc: users@ovirt.org
>> Sent: Friday, September 11, 2015 12:18:49 PM
>> Subject: Re: [ovirt-users] Issues while deploying
>>
>> Hi Alon,
>>
>> No ISO is available in the mentioned URL.
>>
>> Thanks,
>> Nagaraju
>>
>>
>> On Thu, Sep 10, 2015 at 5:15 PM, Alon Bar-Lev  wrote:
>>
>> >
>> >
>> > - Original Message -
>> > > From: "Budur Nagaraju" 
>> > > To: "Alon Bar-Lev" 
>> > > Cc: users@ovirt.org
>> > > Sent: Thursday, September 10, 2015 2:41:28 PM
>> > > Subject: Re: [ovirt-users] Issues while deploying
>> > >
>> > > Hi Alon,
>> > >
>> > > Thanks for your quick response,
>> > >
>> > > How to resolve this ? in the ovirt portal I have not found the latest one
>> > > hypervisor node.
>> >
>> > Try[1].
>> > When it comes up again.
>> >
>> > [1] http://resources.ovirt.org/pub/ovirt-3.5/iso/
>> >
>> >
>> > >
>> > > Thanks
>> > > On Sep 10, 2015 5:04 PM, "Alon Bar-Lev"  wrote:
>> > >
>> > > >
>> > > > - Original Message -
>> > > > > From: "Budur Nagaraju" 
>> > > > > To: users@ovirt.org
>> > > > > Sent: Thursday, September 10, 2015 6:18:36 AM
>> > > > > Subject: [ovirt-users] Issues while deploying
>> > > > >
>> > > > > HI
>> > > > >
>> > > > > Installed ovirt3.5 and wile adding ovirt-node its getting stuck at
>> > > > > "non-responsive" state ,as shown in the sreenshot.
>> > > >
>> > > > Non operational != non responsive :)
>> > > >
>> > > > > Below are the the ovirt-Engine logs,
>> > > >
>> > > > Next time please attach logs.
>> > > >
>> > > > As far as I can see the following is the actual issue:
>> > > >
>> > > > 2015-09-10 08:45:42,384 INFO
>> > > > [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>> > > > (DefaultQuartzScheduler_Worker-74) [41a02af3] START,
>> > > > SetVdsStatusVDSCommand(HostName = test, HostId =
>> > > > 400e5335-5e1c-4d7c-8470-d13b5438ad4a, status=NonOperational,
>> > > > nonOperationalReason=CLUSTER_VERSION_INCOMPATIBLE_WITH_CLUSTER,
>> > > > stopSpmFailureLogged=false), log id: 4d27a1fe
>> > > >
>> > > > I guess the repository configuration of the host is ovirt-3.4 and not
>> > > > ovirt-3.5.
>> > > >
>> > > > Regards,
>> > > > Alon
>> > > >
>> > >
>> >
>>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] multi-able nics on hypervisor

2015-09-10 Thread Fabian Deutsch
On Thu, Sep 10, 2015 at 7:46 PM, Kyle Bassett
<kyle.bass...@ravellosystems.com> wrote:
> I have a few hypervisors that have 2 pics, up till now only one was 
> configured with dhcp.
> I enabled the 2nd nic and set it to dhcp also - as soon as I do that it make 
> the other nic “unconfigured” - even when I set it to static it marks the 
> other “unconfigured”.
>
> Can I not have 2 interfaces configured at the same time - I am doing this 
> from the selection menu on the hypervisor.
>
> Ideally I want one for management and the other for virtual machines.

Hey Kyle,

on the Node TUI you can only configure one NIC.
Any additional configuration must be done through Engine.

- fabian

> Thanks
> Kyle
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users



-- 
Fabian Deutsch <fdeut...@redhat.com>
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt 3.5.2 issues with nodes becoming Non Operational

2015-08-17 Thread Fabian Deutsch
On Wed, Aug 12, 2015 at 8:20 PM, Chris Liebman chri...@taboola.com wrote:
 I may have figured this out.  The systems that failed are running the
 Oracle unbreakable kernel:

 3.8.13-98.el6uek.x86_64

 The working systems are running the default CentOS 6 2.6 kernel.

There you go, this kernel is unfakeable ;)

- fabian

 and the error from the vdsm.log only show up on the UEK kernel.

 -- Chris




 On Wed, Aug 12, 2015 at 9:34 AM, Chris Liebman chri...@taboola.com wrote:

 Hi,
I'm new to oVirt and recently built a 10 node ovirt 3.5 DC with shared
 storage using gluster configured as distributed-replicated (replication =
 2).  Shortly after 7 of the 10 nodes dropped, one at a time over a few
 hours, into Non Operational state.  Attempting to activate one of these
 nodes gives the error:  Failed to connect Host ovirt-node260 to Storage
 Pool LADC-TBX. Attempting to put the node into Maintenance eaves the node
 stuck in Preparing For maintenance.

 When I rebooted one of the nodes I see this in the nodes event list:

 Host ovirt-node269 reports about one of the Active Storage Domains as
 Problematic.

 I see many of these errors in the vdsm log from the failed nodes:

 Thread-1::ERROR::2015-08-12
 10:01:17,748::__init__::506::jsonrpc.JsonRpcServer::(_serveRequest) Internal
 server error

 Traceback (most recent call last):

   File /usr/lib/python2.6/site-packages/yajsonrpc/__init__.py, line
 501, in _serveRequest

 res = method(**params)

   File /usr/share/vdsm/rpc/Bridge.py, line 267, in _dynamicMethod

 result = fn(*methodArgs)

   File /usr/share/vdsm/API.py, line 1330, in getStats

 stats.update(self._cif.mom.getKsmStats())

   File /usr/share/vdsm/momIF.py, line 60, in getKsmStats

 stats = self._mom.getStatistics()['host']

   File /usr/lib/python2.6/site-packages/mom/MOMFuncs.py, line 75, in
 getStatistics

 host_stats =
 self.threads['host_monitor'].interrogate().statistics[-1]

 AttributeError: 'NoneType' object has no attribute 'statistics'

 Any help here is appreciated.

 -- Chris



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users




-- 
Fabian Deutsch fdeut...@redhat.com
RHEV Hypervisor
Red Hat
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] 3.5.3 node iso

2015-07-15 Thread Fabian Deutsch
- Original Message -
 
 
 On 09/07/15 20:28, Fabian Deutsch wrote:
  - Original Message -
  Any chance that 3.5.3 EL7 node will get a release soon?
  Hey Patrick,
 
  currently we are not publishing official isos to resources.ovirt.org,
  instead please
  use the ISOs build in our CI:

 Out of curiosity, why is still not 'official' ?

The final bit to do the publishing is just not yet in place.
That final bit will take the ISOs from our CI and publish them, whenever an 
oVirt update is happening.

But in the end, the isos from the CI and the officially released ones, will be 
from the same build process.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt-Node + hosted engine question

2015-07-14 Thread Fabian Deutsch
- Original Message -
 Hi All.
 
 As I was perusing my e-mails from this list earlier today one that
 caught my attention was one that had to do with ovirt-node and hosted
 engine.  It appeared as though it is possible to install hosted engine
 on a ovirt-node host, and indeed, when I installed ovirt-node into a
 VirtualBox VM to poke around, there is a hosted engine option in the
 menu where you can enter a URL for an ISO/pxe source for OS installtion.

Hey,

 I just want to clarify the following questions:
 
   1.) Is it possible to install ovirt-node, and then install a hosted
 engine?

Yes.

   2.) If the answer to 1.) is Yes, does it require some sort of
 NFS-enabled storage, or can you confgiure local storage on ovirt-node
 and install the engine to there?

Currently you can install hosted-engine on eitehr NFS or iSCSI storage

   3.) Is it possible to create NFS-enabled storage on ovirt-node?

No.
Maybe you technically can, but I can just strongly discourage to do that.

   4.) Can you install the hosted engine onto external NFS storage, then
 move/migrate it to local storage on ovirt-node?

I strongly believe not.

 I am thinking of a lab situation where there is only one server, but
 gobs of RAM and storage.  Running ovirt-node as the host would require
 fewer space resources (not that I would necessarily be hurting for
 space, but any extra I could squeeze out would not be unwelcome).

Maybe this will work in future, when we can also configure some storage
server on Node. But for now that is not supported.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] 3.5.3 node iso

2015-07-09 Thread Fabian Deutsch
- Original Message -
 Any chance that 3.5.3 EL7 node will get a release soon?

Hey Patrick,

currently we are not publishing official isos to resources.ovirt.org, instead 
please
use the ISOs build in our CI:

http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/

This build is building nightly builds (to pickup the latest CentOS 7 packages),
with the latest stable oVirt packages (from 3.5.3 currently).

- fabian

P.s.: I just double-checked that the build really contains the latest updates
(ovirt-node-3.2.3-11.el7.centos.noarch)
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] R: R: R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer

2015-07-09 Thread Fabian Deutsch
- Original Message -
 On Wed, Jul 08, 2015 at 09:11:42AM +0300, Michael S. Tsirkin wrote:
  On Tue, Jul 07, 2015 at 05:13:28PM +0100, Dan Kenigsberg wrote:
   On Tue, Jul 07, 2015 at 10:14:54AM +0200, NUNIN Roberto wrote:

 On Mon, Jul 06, 2015 at 10:33:59AM +0200, NUNIN Roberto wrote:
  Hi Dan
 
  Sorry for question: what do you mean for interface vnet ?
  Currently our path is :
  eno1 - eno2   bond0 - bond.3500 (VLAN) -- bridge -
  vm.
 
  Which one of these ?
  Moreover, reading Fabian statements about bonding limits, today I
  can try
 to switch to a config without bonding.

 vm is a complicated term.

 `brctl show` would not show you a vm connected to a bridge. When
 you
 WOULD see is a vnet888 tap device. The other side of this device is
 held by qemu, which implement the VM.

Ok, understood and found it, vnet2


 I'm asking if the dhcp offer has reached that tap device.

No, the DHCP offer packet do not reach the vnet2 interface, I can see
only DHCP DISCOVER.
   
   Ok, so it seems that we have a problem in the host bridging.
   
   Is it the latest kernel-3.10.0-229.7.2.el7.x86_64 ?
   
   Michael, a DHCP DISCOVER is sent out of a just-booted guest, and OFFER
   returns to the bridge, but is not propagated to the tap device.
   Can you suggest how to debug this further?
  
  Dump packets including the ethernet headers.
  Likely something interfered with them so the eth address is wrong.
  
  Since bonding does this sometimes, this is the most likely culprit.
 
 We've ruled this out already - Roberto reproduces the issue without a
 bond.

To me this looks like either a regression in the host side bridging. But otoh 
it doesn't look
like it's happening always, because otherwise I'd expect more noise around this 
issue.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933

2015-07-06 Thread Fabian Deutsch
…

  Issue has been found, patch pushed: https://gerrit.ovirt.org/43147
  
  
  thanks,it works.but still get error:[ ERROR ] Failed to execute stage 'Misc
  configuration': Incoherence detected in OVF file: image size 1048576
  does not match declared size. My image is
  oVirt-Engine-Appliance-CentOS-x86_64-7-20150701.75.ova and oVirt Node
  Hypervisor release 3.5
  (0.999.201507032312.el7.centos)
  
   
 
 Fabian, can you respin the Appliance checking the ovf file matches?

Daily builds are available here:
http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_merged/

Sandro, did you merge it only in master on 3.5 as well?
And what version should I look for tto ensure that the correct HE build got in?

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer

2015-07-03 Thread Fabian Deutsch
- Original Message -
 Thanks for answering, my considerations below.

…

  I've observed this behavior in bug
  https://bugzilla.redhat.com/show_bug.cgi?id=1230638
  We also removed all firewall rules, checked iPXE and I also saw the
  requests
  going out, but no replies getting to the VM.
  But here it sounds like it isn't specific to bonds.
  After all I did not find the solution yet.
 
 In our config, I can see the DHCP offer until the hypervisor bridge interface
 toward vm

Just to make sure, is your setup:

NIC -- bridge -- VM?

Or is a bond involved?

 
  It is probably a good idea to install the oS with a static IP, and then
  switch to dhcp to then use tcpdump inside the vm to see what is reaching
  the inside.
 
 Already done. Vm do not acquire the IP address and, on the vm side, tcpdump
 shows only requests.
 At the same time, the DHCP offer s detected on the bridge if of the
 hypervisor.
 
 With static IP, vm works fine.

Yes, it only seems to be around dhcp.

If you don't have a bond involved, then please reopen the bug abaove, and we 
try to find
someone to look at it.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] R: R: R: PXE boot of a VM on vdsm don't read DHCP offer

2015-07-03 Thread Fabian Deutsch
- Original Message -
 Hi Dan, guys
 
 Sorry for very late follow-up, but we had a lot of other topics to fix just
 before to go back on this one.
 
 We have tried another approach just to check if the kernel of the vdsm iso
 image used to install the host could create the problem I've reported to the
 list.
 
 Now we have reinstalled the same hardware with latest CentOS 7.1, fully
 updated.
 Installed vdsm, then joined the oVirt cluster.
 
 Well, we are observing the same behavior as before.
 No DHCP offer is reaching the booting VM, and:
 
 brctl showmacs bridge_if show us the booting vm mac-address
 tcpdump -I bridge_if show us the dhcp offer coming from dhcp server.
 
 We have also tried to remove ANY firewall rule.
 
 It isn't a PXE issue (gPXE 0.9.7) but only a DHCP process issue. Infact, if
 we install a vm manually and assign a static IP, it works fine.
 If we switch to dhcp, the vm don't get the dynamic one.
 In this case, tcpdump on vm shows only the DHCP discovery, not the DHCP
 offer.
 
 Any further suggestion/hint ?

I've observed this behavior in bug
https://bugzilla.redhat.com/show_bug.cgi?id=1230638
We also removed all firewall rules, checked iPXE and I also saw the requests
going out, but no replies getting to the VM.
But here it sounds like it isn't specific to bonds.
After all I did not find the solution yet.

It is probably a good idea to install the oS with a static IP, and then
switch to dhcp to then use tcpdump inside the vm to see what is reaching
the inside.

- fabian

 
 RN
 
  -Messaggio originale-
  Da: Dan Kenigsberg [mailto:dan...@redhat.com]
  Inviato: lunedì 18 maggio 2015 16:14
  A: NUNIN Roberto
  Cc: users@ovirt.org; ibar...@redhat.com
  Oggetto: Re: R: [ovirt-users] R: PXE boot of a VM on vdsm don't read DHCP
  offer
 
  On Fri, May 08, 2015 at 03:11:25PM +0200, NUNIN Roberto wrote:
   Hi Dan
   Thanks for answering
  
  
  
Which kernel does the el7 host run? I think that Ido has seen a case
where `brctl showmacs` was not populated with the VM mac, despite a
packet coming out of it.
  
   Kernel is: 3.10.0-123.20.1.el7.x86_64, package is vdsm only. Brctl isn't
  available within vdsm only package.
 
  Could you try upgrading to a more up-to-date
  http://mirror.centos.org/centos-
  7/7.1.1503/updates/x86_64/Packages/kernel-3.10.0-
  229.4.2.el7.x86_64.rpm
  ?
 
  bridge-utils is a vdsm dependency. It must exist on your host. Please
  see if the mac of the vNIC shows up on `brctl showmacs` as it should.
 
   
Can you tcpdump and check whether the bridge propogated the DHCP
  offer
to the tap device of the said VM? Does the packet generated by
`ether-wake MAC-of-VM` reach the tap device?
  
   Yes: host see the broadcast :
   0.000.0.0.0   255.255.255.255   DHCP
   346DHCP
  Discover - Transaction ID 0x69267b67
   It came from the right MAC:
   Source: Qumranet_15:81:03 (00:1a:4a:15:81:03)
   And it is tagged correctly:
   802.1Q Virtual LAN, PRI: 0, CFI: 0, ID: 3500
  
   This is the offer, on the bond interface:
   1.01235510.155.124.2  10.155.124.246DHCP
   346DHCP
  Offer- Transaction ID 0x69267b67
   Layer 2 info:
   Ethernet II, Src: Cisco_56:83:c3 (84:78:ac:56:83:c3), Dst:
  Qumranet_15:81:03 (00:1a:4a:15:81:03)
   Tagging on the bond:
   802.1Q Virtual LAN, PRI: 0, CFI: 0, ID: 3500
  
   The tag is correctly removed when DHCP offer is forwarded over the
  bond.3500.
   Here's the offer content, seems everything right:
  
   Client IP address: 0.0.0.0 (0.0.0.0)
   Your (client) IP address: 10.155.124.246 (10.155.124.246)
   Next server IP address: 10.155.124.223 (10.155.124.223)
   Relay agent IP address: 10.155.124.2 (10.155.124.2)
   Client MAC address: Qumranet_15:81:03 (00:1a:4a:15:81:03)
   Client hardware address padding: 
   Server host name: 10.155.124.223
   Boot file name: pxelinux.0
   Magic cookie: DHCP
  
   Nothing of this offer appear on the VM side.
 
  But does it show on the host's bridge? on the tap device?
 
  
   ether-wake -i bond0.3500 00:1a:4a:15:81:03 (started from the host)
   reach the VM eth0 interface:
   2.002028   HewlettP_4a:47:b0 Qumranet_15:81:03 WOL
   116
  MagicPacket for Qumranet_15:81:03 (00:1a:4a:15:81:03)
  
   Really strange behavior.
  
   Roberto
 
 Questo messaggio e' indirizzato esclusivamente al destinatario indicato e
 potrebbe contenere informazioni confidenziali, riservate o proprietarie.
 Qualora la presente venisse ricevuta per errore, si prega di segnalarlo
 immediatamente al mittente, cancellando l'originale e ogni sua copia e
 distruggendo eventuali copie cartacee. Ogni altro uso e' strettamente
 proibito e potrebbe essere fonte di violazione di legge.
 
 This message is for the designated recipient only and may contain privileged,
 proprietary, or otherwise private 

Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933

2015-07-01 Thread Fabian Deutsch
- Original Message -
 Hey,
I can't update ovirt node,get this message:

From what to what Node version did you want to upgrade?

Upgrades from el6 to el7 are not supported.

- fabian

 [root@ovirthost1 Stor01]# ovirt-node-upgrade
 --iso=/data/Stor01/ISOs/ovirt-node-iso-3.5-0.999.201506302311.el7.centos.iso
 --reboot=1
 ovirt-node-upgrade.UpgradeTool: INFO Temporary Directory is:
 /data/tmpfZC2lU
 ovirt-node-upgrade.LockFile: INFO Acquiring Lock
 ovirt-node-upgrade.UpgradeTool: ERRORError: Upgrade Failed: Command
 Failed: '('mount', '-o', 'loop', '/live/LiveOS/squashfs.img',
 '/data/tmpfZC2lU/squashfs')' []
 Traceback (most recent call last):
   File /usr/sbin/ovirt-node-upgrade, line 362, in run
 self._extract_rootfs(self._options.iso_file)
   File /usr/sbin/ovirt-node-upgrade, line 206, in _extract_rootfs
 squashfs_dir)
   File /usr/sbin/ovirt-node-upgrade, line 145, in _system
 raise RuntimeError(Command Failed: '%s' %s % (command, output))
 RuntimeError: Command Failed: '('mount', '-o', 'loop',
 '/live/LiveOS/squashfs.img', '/data/tmpfZC2lU/squashfs')' []
 ovirt-node-upgrade.UpgradeTool: INFO Running rollback hooks
 ovirt-node-upgrade.UpgradeTool: INFO rollback hooks completed
 ovirt-node-upgrade.UpgradeTool: INFO Warning:
 /data/tmpfZC2lU/rootfs/usr/libexec/ovirt-node/hooks/rollback does not exist
 ovirt-node-upgrade.UpgradeTool: INFO Upgrade Failed, Rollback Completed
 ovirt-node-upgrade.UpgradeTool: INFO Cleaning up temporary directory
 ovirt-node-upgrade.UpgradeTool: WARNING  Cleanup Failed
 
 
 thanks
 
 --qiang
 
 2015-07-01 15:20 GMT+08:00 Fabian Deutsch fdeut...@redhat.com:
 
 
 
  - Original Message -
   hi fabian:
  I got some error message below.How can i fix this?
  
 
  Hey
 
   [ ERROR ] Not enough space in the temporary directory
 Please specify path to a temporary directory with at least 10
  GB
 
  You need more space on /tmp - At best you should have 50GB available on /
 
   [WARNING] Minimum requirements for disk size not met
 
  The same as above
 
 Engine FQDN: ovirtmgmt.ctcnet.com
   [WARNING] Failed to resolve ovirtmgmt.ctcnet.com using DNS, it can be
   resolved only locally
 
  The FQDN you use should be resolvable in your network, and it seems as if
  this
  is not the case.
 
   [ INFO  ] Stage: Setup validation
   [WARNING] Cannot validate host name settings, reason: resolved host does
   not match any of the local addresses
   [WARNING] Failed to resolve ovirthost1.ctcnet.com using DNS, it can be
   resolved only locally
 
  Same as the previous one.
 
   [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence
   detected in OVF file: image size 1048576 does not match declared size
   10737418240
 
  Mh. This is a quite old bug.
  Could yo uretry with a more recent iso from:
  http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/
 
 
  Greetings
  fabian
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933

2015-07-01 Thread Fabian Deutsch


- Original Message -
 hi fabian:
I got some error message below.How can i fix this?
 

Hey

 [ ERROR ] Not enough space in the temporary directory
   Please specify path to a temporary directory with at least 10 GB

You need more space on /tmp - At best you should have 50GB available on /

 [WARNING] Minimum requirements for disk size not met

The same as above

   Engine FQDN: ovirtmgmt.ctcnet.com
 [WARNING] Failed to resolve ovirtmgmt.ctcnet.com using DNS, it can be
 resolved only locally

The FQDN you use should be resolvable in your network, and it seems as if this
is not the case.

 [ INFO  ] Stage: Setup validation
 [WARNING] Cannot validate host name settings, reason: resolved host does
 not match any of the local addresses
 [WARNING] Failed to resolve ovirthost1.ctcnet.com using DNS, it can be
 resolved only locally

Same as the previous one.

 [ ERROR ] Failed to execute stage 'Misc configuration': Incoherence
 detected in OVF file: image size 1048576 does not match declared size
 10737418240

Mh. This is a quite old bug.
Could yo uretry with a more recent iso from:
http://jenkins.ovirt.org/job/ovirt-node_ovirt-3.5_create-iso-el7_merged/


Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] how can i setup hosted engine on the ovirt-node-3.5-201504280933

2015-06-30 Thread Fabian Deutsch
- Original Message -
 I 'm installing oVirt Node using a
 CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked.
 How can i setup hosted engine by using OVirt Node Console?or where can i
 get the Engine OVA? I can't find any description about this in the 
 www.ovirt.org.

Hey Zhong,
the process is very similar to http://www.ovirt.org/Features/Self_Hosted_Engine
except that you start it with the page you pasted below.

The OVA which is intended for this page can be found here:
http://jenkins.ovirt.org/job/ovirt-appliance-engine_3.5_merged/


Let us know if this works for you!

- fabian

 The Console looks like this:
  
  Hosted Engine
 Setup
 
 Hosted Engine: Not configured
 
  Engine VM Name:
  Engine Status: Hosted engine not configured
 
  Engine ISO/OVA URL for download:
 _
 
  PXE Boot Engine VM [ ]
 
 
 
 
 
 Thanks.
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] How do I get discard working?

2015-06-10 Thread Fabian Deutsch
- Original Message -
 oVirt Node - 3.5 - 0.999.201504280931.el7.centos
 
 Using our shared storage via baremetal (stock CentOS 7) - iscsi, I can
 successfully issue fstrim commands. With oVirt at the VM level, even
 with direct LUNS, trim commands are not supported despite having the LVM
 config in the VMs set up to allow it.

Hey,

IIUIC you try to get discard working for VMs? That means that if fstrim is
used inside the VM, that it is getting passed down?

The command line needed for qemu to support discards is:

$ qemu … -drive if=virtio,cache=unsafe,discard,file=disk …

I'm not sure which qemu disk drivers/busses support this, but at least virtio 
does so.
I'm using it for development.

You could try a vdsm hook to modify the qemu command which is called when the 
VM is spawned.

Let me know if you can come up with a hook to realize this!

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cannot start VM after reboot an host

2015-05-28 Thread Fabian Deutsch
- Original Message -
  De: Fabian Deutsch fdeut...@redhat.com
  À: Kevin C ki...@kiven.fr
  Cc: users@ovirt.org
  Envoyé: Jeudi 28 Mai 2015 08:44:53
  Objet: Re: [ovirt-users] Cannot start VM after reboot an host
 
  - Original Message -
  - Original Message -
   Hi list,
   
   I cannot start any VM after reboot my hosts on oVirt 3.5.2 and 3.5.2
   nodes.
   It
   failed on nodes with this error :
   
   hread-11544::ERROR::2015-05-27 19:17:42,479::vm::2331::vm.Vm::
   (_startUnderlyingVm) vmId=`4e349319-72e1-42ee-a74c-3dbd8ca45e4b`::The vm
   start
   process failed
   Traceback (most recent call last):
 File /usr/share/vdsm/virt/vm.py, line 2271, in _startUnderlyingVm
 File /usr/share/vdsm/virt/vm.py, line 3335, in _run
 File /usr/lib/python2.6/site-packages/vdsm/libvirtconnection.py,
 line
 111,
   in wrapper
 File /usr/lib64/python2.6/site-packages/libvirt.py, line 2709, in
   createXML
   libvirtError: internal error Cannot parse sensitivity level in s0
  
  Hey Kevin,
  
  can you please tell me the exact Node version you are using?
  
  We have actually seen this error before, but we actually assumed that it
  was
  fixed a few weeks ago.
  
  - fabian
 
 Hi Fabian,
 
 I use Node version 3.5 - 0.999.201504280933.el6. I cannot use an el7 version
 now because our nodes are on HP servers and we need the cciss module.

There are a few things we can try:
0. Please provide ps axZ from the running node with the failed libvirtd
   (attach or paste or send to me in private)
   This will help me to see if it's the issue we saw before.
1. The ovirt-node version that is used in your build - to find out if our fix 
is in
2. Try a Node build from today, which should have the fix


- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Instability with Dell Compellent via iSCSI/Multipath

2015-05-22 Thread Fabian Deutsch
- Original Message -
 On 05/21/2015 03:49 PM, Chris Jones - BookIt.com Systems Administrator
 wrote:
  I've applied the multipath.conf and iscsi.conf changes you recommended.
  It seems to be running better. I was able to bring up all the hosts and
  VMs without it falling apart.
 
 I take it back. This did not solve the issue. I tried batch starting the
 VMs and half the nodes went down due to the same storage issues. VDSM

Is there maybe some IO problem on the iSCSI target side?
IIUIC the problem is some timeout, which could indicate that the target
is overloaded.

But maybe I get something wrong ...

- fabian

 Logs again.
 https://www.dropbox.com/s/12sudzhaily72nb/vdsm_failures.log.gz?dl=1
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Instability with Dell Compellent via iSCSI/Multipath

2015-05-20 Thread Fabian Deutsch
- Original Message -
 Hello Chris,
 
 On 05/19/2015 06:19 PM, Chris Jones - BookIt.com Systems Administrator
 wrote:
  Engine: oVirt Engine Version: 3.5.2-1.el7.centos
  Nodes: oVirt Node - 3.5 - 0.999.201504280931.el7.centos
  Remote storage: Dell Compellent SC8000
  Storage setup: 2 nics connected to the Compellent. Several domains
  backed by LUNs. Several VM disk using direct LUN.
  Networking: Dell 10 Gb/s switches
 
  I've been struggling with oVirt completely falling apart due to storage
  related issues. By falling apart I mean most to all of the nodes
  suddenly losing contact with the storage domains. This results in an
  endless loop of the VMs on the failed nodes trying to be migrated and
  remigrated as the nodes flap between response and unresponsive. During
  these times, engine.log looks like this.
 
  2015-05-19 03:09:42,443 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-50) domain
  c46adffc-614a-4fa2-9d2d-954f174f6a39:db_binlog_1 in problem. vds:
  blade6c1.ism.ld
  2015-05-19 03:09:42,560 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-38) domain
  0b1d36e4-7992-43c7-8ac0-740f7c2cadb7:ovirttest1 in problem. vds:
  blade2c1.ism.ld
  2015-05-19 03:09:45,497 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-24) domain
  05c8fa9c-fcbf-4a17-a3c6-011696a1b9a2:ovirttest2 in problem. vds:
  blade3c2.ism.ld
  2015-05-19 03:09:51,713 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-46) domain
  b050c455-5ab1-4107-b055-bfcc811195fc:os_data_1 in problem. vds:
  blade4c2.ism.ld
  2015-05-19 03:09:57,647 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-13) Domain
  c46adffc-614a-4fa2-9d2d-954f174f6a39:db_binlog_1 recovered from problem.
  vds: blade6c1.ism.ld
  2015-05-19 03:09:57,782 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-6) domain
  26929b89-d1ca-4718-90d6-b3a6da585451:generic_data_1 in problem. vds:
  blade2c1.ism.ld
  2015-05-19 03:09:57,783 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-6) Domain
  0b1d36e4-7992-43c7-8ac0-740f7c2cadb7:ovirttest1 recovered from problem.
  vds: blade2c1.ism.ld
  2015-05-19 03:10:00,639 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-31) Domain
  c46adffc-614a-4fa2-9d2d-954f174f6a39:db_binlog_1 recovered from problem.
  vds: blade4c1.ism.ld
  2015-05-19 03:10:00,703 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-17) domain
  64101f40-0f10-471d-9f5f-44591f9e087d:logging_1 in problem. vds:
  blade1c1.ism.ld
  2015-05-19 03:10:00,712 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-4) Domain
  05c8fa9c-fcbf-4a17-a3c6-011696a1b9a2:ovirttest2 recovered from problem.
  vds: blade3c2.ism.ld
  2015-05-19 03:10:06,931 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-48) Domain
  05c8fa9c-fcbf-4a17-a3c6-011696a1b9a2:ovirttest2 recovered from problem.
  vds: blade4c2.ism.ld
  2015-05-19 03:10:06,931 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-48) Domain
  05c8fa9c-fcbf-4a17-a3c6-011696a1b9a2:ovirttest2 has recovered from
  problem. No active host in the DC is reporting it as problematic, so
  clearing the domain recovery timer.
  2015-05-19 03:10:06,932 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-48) Domain
  b050c455-5ab1-4107-b055-bfcc811195fc:os_data_1 recovered from problem.
  vds: blade4c2.ism.ld
  2015-05-19 03:10:06,933 INFO
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-48) Domain
  b050c455-5ab1-4107-b055-bfcc811195fc:os_data_1 has recovered from
  problem. No active host in the DC is reporting it as problematic, so
  clearing the domain recovery timer.
  2015-05-19 03:10:09,929 WARN
  [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
  (org.ovirt.thread.pool-8-thread-16) domain
  b050c455-5ab1-4107-b055-bfcc811195fc:os_data_1 in problem. vds:
  blade3c1.ism.ld
 
 
  My troubleshooting steps so far:
 
   1. Tailing engine.log for in problem and recovered from problem
   2. Shutting down all the VMs.
   3. Shutting down all but one node.
   4. Bringing up one node at a time to see what the log reports.
 
 vdsm.log in the node side, will help here too.
 
  When only one node is active everything is fine. When a second node
  comes up, I begin to see the log output as shown above. I've been
  struggling with this for over a month. I'm sure others have used oVirt
  with a Compellent and encountered (and worked around) similar problems.
  I'm looking for some 

Re: [ovirt-users] Edit a node image

2015-05-05 Thread Fabian Deutsch
- Original Message -
 Le mardi 5 mai 2015 04:17:04, vous avez écrit :
  - Original Message -
  
   Hi,
   
   I am testing oVirt to deploy a new virtualization infrastructure. I want
   to
   edit a node with the command edit-node.
   I use this command to add some HP packages to manage our ProLiant Servers
   and add some plugins :
   
   edit-node --install=hponcfg  --install=hpssacli --install=hp-health   --
   install-plugin=ovirt-node-plugin-snmp
   --install-plugin=ovirt-node-plugin-ipmi
   --repo=/etc/yum.repos.d/ovirt-3.5.repo --repo=/etc/yum.repos.d/CentOS-
   Base.repo --repo=/etc/yum.repos.d/epel.repo --repo=/etc/yum.repos.d/HP-
   spp.repo ovirt-node-iso-3.5.2-edited.el6.iso
   
   I don't see my plugins or packages in my new ISO file, it seems it only
   add
   the
   first packages I add in the command line.
   
   Perhaps I misunderstood how using the edit-node command, must I add all
   packages in one --install  option ?
  
  Hey Kevin,
  
  --install-plugin takes a single argument, which is a concatenated list
  of all the rpms you want to install, separated by ,.
  
  I.e.:
  
  --install-plugin=ovirt-node-plugin-ipmi,ovirt-node-plugin-snmp
  
  Could you give that a try?
  
  Greetings
  fabian
 Hi Fabian,
 
 I finally succeed to build an image with the two plugins. I needed to use two
 edit-node commands to incorporate the plugins in the ISO.

Hey Kevin,

great that this worked for you.

Tho I wonder why edit-node did not take several plugins at once, it should.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Edit a node image

2015-05-05 Thread Fabian Deutsch
- Original Message -
 Hi,
 
 I am testing oVirt to deploy a new virtualization infrastructure. I want to
 edit a node with the command edit-node.
 I use this command to add some HP packages to manage our ProLiant Servers and
 add some plugins :
 
 edit-node --install=hponcfg  --install=hpssacli --install=hp-health   --
 install-plugin=ovirt-node-plugin-snmp
 --install-plugin=ovirt-node-plugin-ipmi
 --repo=/etc/yum.repos.d/ovirt-3.5.repo --repo=/etc/yum.repos.d/CentOS-
 Base.repo --repo=/etc/yum.repos.d/epel.repo --repo=/etc/yum.repos.d/HP-
 spp.repo ovirt-node-iso-3.5.2-edited.el6.iso
 
 I don't see my plugins or packages in my new ISO file, it seems it only add
 the
 first packages I add in the command line.
 
 Perhaps I misunderstood how using the edit-node command, must I add all
 packages in one --install  option ?

Hey Kevin,

--install-plugin takes a single argument, which is a concatenated list
of all the rpms you want to install, separated by ,.

I.e.:

--install-plugin=ovirt-node-plugin-ipmi,ovirt-node-plugin-snmp

Could you give that a try?

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problem to reinstall an ovirt node

2015-04-24 Thread Fabian Deutsch
- Original Message -
 Hello,
 
 for a test installation I have reinstall my ovirt manager. Now I want to
 add my old ovirt nodes, but without to reinstall from scratch the nodes.
 
 When I try to add a node I got the error messages in the UI
 Installation Failed

Are you using oVirt Node or something else?

In general it should work when you use Add host from the Engine side.

In that case the certificates should be re-deployed.

- fabian

 The ovirt manager runs version 3.5.2
 
 it look to me he has problem to add the vdsm certificate
 
 2015-04-23 15:51:01 DEBUG otopi.plugins.otopi.dialog.machine
 dialog.__logString:215 DIALOG:SEND   ###
 2015-04-23 15:51:01 DEBUG otopi.plugins.otopi.dialog.machine
 dialog.__logString:215 DIALOG:SEND   ###
 2015-04-23 15:51:01 DEBUG otopi.plugins.otopi.dialog.machine
 dialog.__logString:215 DIALOG:SEND   ### Please input VDSM
 certificate chain that matches certificate request, top is issuer
 2015-04-23 15:51:01 DEBUG otopi.plugins.otopi.dialog.machine
 dialog.__logString:215 DIALOG:SEND   ### 2015-04-23 15:51:01 DEBUG
 otopi.plugins.otopi.dialog.machine dialog.__logString:215
 DIALOG:SEND   ### type '--=451b80dc-996f-432e-9e4f-2b29ef6d1141=--'
 in own line to mark end, '--=451b80dc-996f-ABORT-9e4f-2b29ef6d1141=--'
 aborts 2015-04-23 15:51:02 DEBUG otopi.context
 context._executeMethod:152 method exception Traceback (most recent call
 last): File /tmp/ovirt-0O5Q8S6G6j/pythonlib/otopi/context.py, line
 142, in _executeMethod method['method']()
   File
 /tmp/ovirt-0O5Q8S6G6j/otopi-plugins/ovirt-host-deploy/vdsm/pki.py,
 line 316, in _misc '\n\nPlease input VDSM certificate chain that '
   File /tmp/ovirt-0O5Q8S6G6j/otopi-plugins/otopi/dialog/machine.py,
 line 204, in queryMultiString
 v = self._readline()
   File /tmp/ovirt-0O5Q8S6G6j/pythonlib/otopi/dialog.py, line 259, in
 _readline
 raise IOError(_('End of file'))
 IOError: End of file
 
 
 
 Here is the complete logfile
 http://pastebin.com/XpEZh3y3
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt-node 3.5 iso and rpm are finaly available

2015-04-02 Thread Fabian Deutsch
- Original Message -
 Hi
 
 Nightly builds of ovirt node iso for 3.5 and master branches are now
 available on jenkins.
 http://jenkins.ovirt.org/user/tlitovsk/my-views/view/Node/
 
 They are also available as RPMs for use from your engine.
 And those RPM will be available on http://resources.ovirt.org/pub/
 repositories

Tolik,

those are great news! Finally we have regular ovirt-node builds again,
that means stable ovirt-node-iso buidls are in sight!

Nice to see this happen.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Hosted Engine on oVirt Node Hypervisor

2015-03-25 Thread Fabian Deutsch
Hey Jason,

- Original Message -
 I'm setting up some new oVirt infrastructure, and wanted to give hosted
 engine a try.  I downloaded and installed the oVirt Node Hypervisor ISO
 (3.5-0.999.201502231653.el7.centos) on one of 3 nodes.  One of the
 options in the hypervisor menu is Hosted Engine.  This requires an
 Engine ISO/OVA URL for download.  The thing is - as far as I can tell,
 there is no download link for this ISO/OVA on the ovirt release web
 site.  I also can't find anything in the documentation that refers to it
 (or even this menu in the hypervisor). I did find this after some searching:

Yes, you are right, the documentation of Hosted Engine is currently ... sparse.

 http://jenkins.ovirt.org/user/fabiand/my-views/view/Node/job/ovirt-appliance_engine-3.5_master_merged/oVirt-Engine-Appliance-CentOS-x86_64-7-20150319.424.ova

 (Now replaced with a build from 0322).  I asked on the ovirt IRC channel
 and was told that this might work, but because of new functionality
 introduced recently that it also might not. If the feature is available
 in the node ISO, shouldn't there be an appropriate release of the hosted
 engine ISO/OVA that works hand in hand with the node that I've
 downloaded?   If it's not there because it isn't ready, isn't this
 functionality something that should be added to maybe a beta node
 release and tested before being released into the stable node hypervisor
 release?

Yes, the problem here is with the ovirt-appliance.
We did not start building images based on the 3.5 status of the appliance.

I'll see if we can get up a builder for the ovirt-3.5 branch up quickly.

 I asked on the IRC channel whether it might be possible for me to
 kickstart my own engine from the node.  I ran into trouble with that as
 well.   On the installed node, I can only configure one network
 interface.  This is, of course, intended to enable ovirtmgmt for
 communication with engine which would take over and configure everything
 else for you.  Of course, when you don't yet have engine installed and
 need to get it, this leads to a chicken and egg problem.  To kickstart
 engine on node, I need an IP (from mgmt), an image (I guess it could
 come from the mgmt network), but then I also need access to the external
 network (on another NIC) to be able to install the appropriate ovirt yum
 repository, and download the engine!  If I installed my own node
 manually instead if using ISO, I guess I could configure the network,
 and make it work, but I'm trying to take advantage of the work that has
 already been put into node to make this all possible.

I believe I saw a corresponding bug for what you described above.

Does it help if you temporarily add a route to your management network's
router, which enables the hosted-engine host to access the relevant networks
(external, storage, …)?


Greetings
fabian

 Anyway, I'm certainly interested in any feedback from users who have
 been able to make this work.  I guess I could kickstart one node as an
 engine, create the virtual image there, suck the ova down to the mgmt
 server, install node, then use node to re-suck down the hosted engine
 image, but it just seems like a lot of extra work.  Somehow I think it's
 intended to be a little more straightforward than that.
 
 Jason.
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problem deploying ovirt-hosted-engine to iSCSI

2015-02-26 Thread Fabian Deutsch
- Original Message -
 On 25/02/2015 6:23 PM, Simone Tiraboschi wrote:
  - Original Message -
  From: Justin Clacherty jus...@redfish.com.au
  To: Simone Tiraboschi stira...@redhat.com
  Cc: Donny Davis do...@cloudspin.me, users@ovirt.org
  Sent: Wednesday, February 25, 2015 5:26:37 AM
  Subject: Re: [ovirt-users] Problem deploying ovirt-hosted-engine to iSCSI
 
  On 25/02/2015 12:35 AM, Simone Tiraboschi wrote:
  Can you please paste here the output of vdsClient -s 0 getDeviceList 3
  thanks
  Sure. Once the iscsi target is logged in the call to vdsClient never
  returns. After a few minutes I hit ctrl-c, that's what caused the
  traceback. See below for the output.
  Could you please upload somewhere your VDSM logs (/var/log/vdsm/vdsm.log)?
 
 I have it connecting now. I tested it on another machine again and it
 wasn't working. Changed the MTU back to 1500 on both the SAN and the
 host and now it works fine. Not sure why MTU of 9000 doesn't work, but
 I'll worry about that later.

Maybe some intermediate device can not handle taht jumbo frame?

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Self hosted engine iusses

2015-02-06 Thread Fabian Deutsch
I think this bug is covering the cause for this:

https://bugzilla.redhat.com/show_bug.cgi?id=1173290

- fabian

- Original Message -
 Please open a bug Stefano.
 
 Thanks,
 Doron
 
 On 06/02/15 11:19, Stefano Danzi wrote:
  This solved the issue!!!
  Thanks!!
 
  If oVirt rewrite  /etc/multipath.conf maybe useful to open a bug
  What do you-all think about it?
 
  Il 05/02/2015 20.36, Darrell Budic ha scritto:
   You can also add “find_multipaths 1” to /etc/multipath.conf, this
   keeps multipathd from finding non-multipath devices as multi path
   devices and avoids the error message and keeps mutlipathd from binding
   your normal devices. I find it simpler than blacklisting and it should
   work if you also have real multi path devices.
  
   defaults {
find_multipaths yes
polling_interval5
…
  
  
   On Feb 5, 2015, at 1:04 PM, George Skorup geo...@mwcomm.com wrote:
  
   I ran into this same problem after setting up my cluster on EL7. As
   has been pointed out, the hosted-engine installer modifies
   /etc/multipath.conf.
  
   I appended:
  
   blacklist {
   devnode *
   }
  
   to the end of the modified multipath.conf, which is what was there
   before the engine installer, and the errors stopped.
  
   I think I was getting 253:3 trying to map which don't exist on my
   systems. I have a similar setup, md raid1 and LVM+XFS for gluster.
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
 
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cutting edge ovirt node images.

2015-01-26 Thread Fabian Deutsch
Kudos Tolik!

- fabian

- Original Message -
 Hi
 
 Both projects are now built with VDSM and Hosted Engine plugins.
 
 Best Regards.
 Tolik.
 
 - Original Message -
 From: Anatoly Litvosky tlito...@redhat.com
 To: users@ovirt.org
 Cc: de...@ovirt.org
 Sent: Thursday, 15 January, 2015 3:46:10 PM
 Subject: Re: [ovirt-users] Cutting edge ovirt node images.
 
 Hi
 
 A centos7 based ovirt-node project joined our jenkins
 http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_merged/
 
 Best Regards
 Tolik
 
 On Sun, 2015-01-11 at 17:29 +0200, Anatoly Litvosky wrote:
  Hi
  
  For all of you that want the latest images for ovirt node.
  For some time there is a new job in the ovirt jenkins that builds an
  image for every commit made.
  http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-fc20_merged/
  Currently for fedora 20 but hopefully more to come.
  
  Many thanks to David (dcaro) for all the effort.
  
  Best regards.
  Tolik.
  
  
  
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Update to 3.5.1 scrambled multipath.conf?

2015-01-26 Thread Fabian Deutsch


- Original Message -
 - Original Message -
  From: Dan Kenigsberg dan...@redhat.com
  To: Gianluca Cecchi gianluca.cec...@gmail.com, nsof...@redhat.com
  Cc: users users@ovirt.org, ykap...@redhat.com
  Sent: Monday, January 26, 2015 2:09:23 PM
  Subject: Re: [ovirt-users] Update to 3.5.1 scrambled multipath.conf?
  
  On Sat, Jan 24, 2015 at 12:59:01AM +0100, Gianluca Cecchi wrote:
   Hello,
   on my all-in-one installation @home I had 3.5.0 with F20.
   Today I updated to 3.5.1.
   
   it seems it modified /etc/multipath.conf preventing me from using my
   second
   disk at all...
   
   My system has internal ssd disk (sda) for OS and one local storage domain
   and another disk (sdb) with some partitions (on one of them there is also
   another local storage domain).
   
   At reboot I was put in emergency boot because partitions at sdb disk
   could
   not be mounted (they were busy).
   it took me some time to understand that the problem was due to sdb gone
   managed as multipath device and so busy for partitions to be mounted.
   
   Here you can find how multipath became after update and reboot
   https://drive.google.com/file/d/0BwoPbcrMv8mvS0FkMnNyMTdVTms/view?usp=sharing
   
   No device-mapper-multipath update in yum.log
   
   Also it seems that after changing it, it was then reverted at boot again
   (I
   don't know if the responsible was initrd/dracut or vdsmd) so in the mean
   time the only thing I could do was to make the file immutable with
   
   chattr +i /etc/multipath.conf
  
  The supported method of achieving this is to place # RHEV PRIVATE in
  the second line of your hand-modified multipath.conf
  
  I do not understand why this has happened only after upgrade to 3.5.1 -
  3.5.0's should have reverted you multipath.conf just as well during each
  vdsm startup.
  
  The good thing is that this annoying behavior has been dropped from the
  master branch, so that 3.6 is not going to have it. Vdsm is not to mess
  with other services config file while it is running. The logic moved to
  `vdsm-tool configure`
  
   
   and so I was able to reboot and verify that my partitions on sdb were ok
   and I was able to mount them (for safe I also ran an fsck against them)
   
   Update ran around 19:20 and finished at 19:34
   here the log in gzip format
   https://drive.google.com/file/d/0BwoPbcrMv8mvWjJDTXU1YjRWOFk/view?usp=sharing
   
   Reboot was done around 21:10-21:14
   
   Here my /var/log/messages in gzip format, where you can see latest days.
   https://drive.google.com/file/d/0BwoPbcrMv8mvMm1ldXljd3hZWnM/view?usp=sharing
   
   
   Any suggestion appreciated.
   
   Current multipath.conf (where I also commented out the getuid_callout
   that
   is not used anymore):
   
   [root@tekkaman setup]# cat /etc/multipath.conf
   # RHEV REVISION 1.1
   
   blacklist {
   devnode ^(sda|sdb)[0-9]*
   }
 
 
 I think what happened is:
 
 1. 3.5.1 had new multipath version
 2. So vdsm upgraded the local file
 3. blacklist above was removed
(it should exists in /etc/multipath.bak)
 
 To prevent local changes, you have to mark the file as private
 as Dan suggests.
 
 Seems to be related to the find_multiapth = yes bug:
 https://bugzilla.redhat.com/show_bug.cgi?id=1173290

The symptoms above sound exactly liek this issue.
When find_multipahts is no (the default when the directive is not present)
I sthat all non-blacklisted devices are tried to get claimed, and this happened 
above.

Blacklisting the devices works, or adding find_mutlipaths yes should also 
work, because
in that case only device which have more than one path (or are explicitly 
named) will be
claimed by multipath.

My 2ct.

- fabian

 Ben, can you confirm that this is the same issue?
 
   
   defaults {
   polling_interval5
   #getuid_callout  /usr/lib/udev/scsi_id --whitelisted
   --replace-whitespace --device=/dev/%n
   no_path_retry   fail
   user_friendly_names no
   flush_on_last_del   yes
   fast_io_fail_tmo5
   dev_loss_tmo30
   max_fds 4096
   }
  
 
 Regards,
 Nir
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt node weekly talk

2015-01-21 Thread Fabian Deutsch
- Original Message -
 On 01/21/2015 10:05 AM, Tolik Litovsky wrote:
  Hello Fabian
 
  Can we move the oVirt node weekly talk to another week day?
  Or just a bit earlier ?
 
 Both are ok for me.

Let's see: I'd suggest to move it to 

 Mondays, 3 p.m. UTC

Does that work for everybody?

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Cutting edge ovirt node images.

2015-01-15 Thread Fabian Deutsch
Hey Tolik,

as far as I recall they do not contain vdsm, correct?

- fabian

- Original Message -
 Hi
 
 A centos7 based ovirt-node project joined our jenkins
 http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_merged/
 
 Best Regards
 Tolik
 
 On Sun, 2015-01-11 at 17:29 +0200, Anatoly Litvosky wrote:
  Hi
  
  For all of you that want the latest images for ovirt node.
  For some time there is a new job in the ovirt jenkins that builds an
  image for every commit made.
  http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-fc20_merged/
  Currently for fedora 20 but hopefully more to come.
  
  Many thanks to David (dcaro) for all the effort.
  
  Best regards.
  Tolik.
  
  
  
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Problem wiht ovirt-node

2015-01-05 Thread Fabian Deutsch
Hey Chhristopher,

please see my inline replies.

- Original Message -
 Looks like that 12/22 ISO doesn't run the installer that I can tell.  I
 really haven't had any good luck with any of the recent ovirt-node stuff
 which is such a shame.  My last installation using the 3.5-pre ISO would
 install and then fail at grub/boot afterwards.  I'm not sure if I'm doing
 something wrong there, but I'm more or less taking all defaults in the
 install, so it is unexpected.

Can you give some details on the exact failure?

Besides that we know (and this is actually the reason why there is still no 
official
Node 3.5 release) that there are issues with a lot of hardware, due to changes 
to
udev, device-mapper, multipath, and kernel. And it took some time to really
identify and solve those issues with changes in our code.
Some recent patches (which landed just before and after christmas), are
addressing these issues.

We are currently in progress of giving this patches some wider testing,
but we are optimistic that these changes will address most of the hardware 
problems.

And we'll also do another scratch build to allow you to test those patches as 
well.

 I feel like enterprise-level virtualization relies upon having the minimal
 OS/install in order to match the other hypervisors.  I hate to think of
 just going to minimal CentOS/RHEL installs, but perhaps that's my best bet
 to get up and testing.
 
 What can the community do to help this along?  Perhaps requiring equivalent
 ovirt-node releases along with every release of ovirt may put the
 motivation behind it?  I'm willing to help test, however I can't put my
 original environment in a constant state of change, obviously.  I'm willing
 to build up some scenarios if that helps get to a
 stable/installable/functioning ovirt-node.  Those of us trying to prove
 this out vs. vmware/ESX need this.

There are many ways to help. Testing - like you did - are an important (but 
sometimes
painful) aspect, and I really appreciate that you continue to test!

So as mentioned above, there will be a new scratch build with more fixes 
related to
hardware support, and please watch this list for the link to the build.

That build will also pickup some recent hosted-engine fixes.

Thanks
fabian

 Chris
 
 On Mon, Dec 22, 2014 at 10:00 AM, Simone Tiraboschi stira...@redhat.com
 wrote:
 
 
 
  - Original Message -
   From: rino villadalm...@gmail.com
   To: Simone Tiraboschi stira...@redhat.com
   Cc: Users@ovirt.org List users@ovirt.org
   Sent: Monday, December 22, 2014 3:49:05 PM
   Subject: Re: [ovirt-users] Problem wiht ovirt-node
  
   Which is the correct iso to do hosted-engine from ovirt-node image ¿? and
   do not loose any data after reboot
  
   http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/
 
  ovirt-3.5-pre/ was for 3.5 beta so it's quite old.
  You can find the latest node build at
  http://jenkins.ovirt.org/job/ovirt-node-iso_master_merged/
  but it's just a nightly build and so it's still not that tested for
  production but you still can help us testing it.
 
  The general availability of 3.5.1 is due to the mid of January.
 
 
   On Mon, Dec 22, 2014 at 11:44 AM, rino villadalm...@gmail.com wrote:
  
but which version can i used with hosted-engine iso, because i want it
  in
production enviroment..
   
Regards
   
On Mon, Dec 22, 2014 at 11:31 AM, Simone Tiraboschi 
  stira...@redhat.com
wrote:
   
   
   
- Original Message -
 From: rino villadalm...@gmail.com
 To: Users@ovirt.org List users@ovirt.org
 Sent: Monday, December 22, 2014 3:14:36 PM
 Subject: [ovirt-users] Problem wiht ovirt-node

 I installed ovirt node with hosted-engine using pre-release
  ovirt-node
3.5
 iso.

 When i shutdown the ovirt-node from menu everything down ok, ( i
register it
 as node in vm ). When i turn on the server next day, ovirt-node
  come up
with
 no vm was installed ( i use other server as storage with nfs). Nfs
  is
 working fine i see all resource if i do showmount -e nfs.server.

 But if i try to do hosted-engine --vm-status or any command with
 hosted-engine it suggest me to do a new deploy, but i have all
enviroment
 configured en my engine.

 I need to configure two ovirt-node, and then move it to datacenter,
  but
after
 shutdown vm engine is not seen by ovirt-node.
   
It's a know bug, it was recently fixed:
https://bugzilla.redhat.com/show_bug.cgi?id=1151339
   
hosted-engine in 3.5.1 will include this fix. General availability
  it's
scheduled for 2015-01-14.
   
If you want to test it, you can try with a recent snapshot.
http://resources.ovirt.org/pub/yum-repo/ovirt-release35-snapshot.rpm
   
Feel free to add your self for oVirt 3.5.1 TestDay:
https://www.ovirt.org/Testing/oVirt_3.5.1_Testing
   
regards,
Simone
   
   
   
 Regards

 --
 ---
 Rondan Rino
 

Re: [ovirt-users] OVirt 3.5 node

2015-01-05 Thread Fabian Deutsch
- Original Message -
 Does the Node Building process located http://www.ovirt.org/Node_Building
 work to build a hypervisor for ovirt 3.5? Having some difficulty getting
 the ovirt 3.5-pre hypervisor images added to ovirt. Keep getting install
 failed

Hey Jason,

to know more details about that bug is really appreciated, but as far as I can 
tell
this is a known error, and we've got some patches (but no ISO yet) which 
address this
(and other installation) related problems.

Please watch out for a new scratch build in the next days.

Greetings
fabian

 Alternatively, does anyone have an EL7/EL6 kickstart for rolling your own
 they're willing to share?
 
 --
 Thanks,
 
 Jason E. Parks - 511855
 Linux System Administrator - RHCE, LPIC3
 Seagate Technology - U.S. Business Data Center
 http://www.seagate.com
 email : jason.e.pa...@seagate.com
 phone: +1(405) 324-3222
 
 WARNING: The information contained in this transmission may be privileged
 or confidential. It is intended only for the above-identified recipient(s).
 If you are not the intended recipient, please forward this transmission to
 the author and delete this transmission and all copies. Thank you.
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Complete CentOS 7 environment

2014-12-16 Thread Fabian Deutsch

  
  Lastly, Id like to mention that the Ovirt Node 3.5 install iso seems broken
  on HP DL360. It goes through the install process fine until the very end
  where it complains about not being able to write the boot loader.
  
 
 Fabian?

This is probably
https://bugzilla.redhat.com/show_bug.cgi?id=1167240

Which we still try to tackle.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] [ovirt-devel] [RFI] Fedora 21 support on oVirt 3.5.z

2014-12-15 Thread Fabian Deutsch
- Original Message -
 Il 15/12/2014 14:10, Gianluca Cecchi ha scritto:
  On Mon, Dec 15, 2014 at 1:48 PM, Sandro Bonazzola sbona...@redhat.com
  mailto:sbona...@redhat.com wrote:
  
  
  I suggest to open a RFE in bugzilla for it, but it won't be in 3.5.z.
  I'm not even sure if we can make it for 3.6.
  BTW I think it's an interesting RFE.

…

  Bugzilla created against ovirt-engine-installer and version 4.0:
  
  https://bugzilla.redhat.com/show_bug.cgi?id=1174236
  
  Do you think it is better to create another one specifically for oVirt
  Hypervisor? And in that case against what component?
 
 Fabian?

The idea of leveraging Fedora roles is a nice idea.

Surely an RFE can be opened against ovirt-node (the hypervisor part of oVirt),
but we need to see how this will fit into our plans.
I'm concerned that it will require a lot of work to create such a role, but
we'll only benefit on Fedora.
And currently we are quite focused on CentOS, because it's quite well received.

Speaking about benefits, I also wonder what benefits are. This needs more
investigations before we can answer it from the Node side.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] node no responsive ovirt 3.5

2014-12-02 Thread Fabian Deutsch
- Original Message -
 
 
 hello
 
 i am matias Spaini and have this problem

Hey Matias,

are you using oVirt Node or CentOS or Fedora?

Thanks
fabian

 when I run this command
  service vdsmd start
 I get this error because
 
 libvirt: Network Driver error : Network not found: no network with matching
 name 'vdsm-ovirtmgmt'
 
 [root@node2 nfs]# service vdsmd start
 initctl: Job is already running: libvirtd
 vdsm: Running mkdirs
 vdsm: Running configure_coredump
 vdsm: Running configure_vdsm_logs
 vdsm: Running run_init_hooks
 vdsm: Running check_is_configured
 libvirt is already configured for vdsm
 vdsm: Running validate_configuration
 SUCCESS: ssl configured to true. No conflicts
 vdsm: Running prepare_transient_repository
 vdsm: Running syslog_available
 vdsm: Running nwfilter
 vdsm: Running dummybr
 vdsm: Running load_needed_modules
 vdsm: Running tune_system
 vdsm: Running test_space
 vdsm: Running test_lo
 vdsm: Running unified_network_persistence_upgrade
 vdsm: Running restore_nets
 libvirt: Network Driver error : Network not found: no network with matching
 name 'vdsm-ovirtmgmt'
 Traceback (most recent call last):
 File /usr/share/vdsm/vdsm-restore-net-config, line 137, in module
 restore()
 File /usr/share/vdsm/vdsm-restore-net-config, line 123, in restore
 unified_restoration()
 File /usr/share/vdsm/vdsm-restore-net-config, line 69, in
 unified_restoratio n
 setupNetworks(nets, bonds, connectivityCheck=False, _inRollback=True)
 File /usr/share/vdsm/network/api.py, line 682, in setupNetworks
 implicitBonding=True, _netinfo=_netinfo, **d)
 File /usr/share/vdsm/network/api.py, line 226, in wrapped
 ret = func(**attrs)
 File /usr/share/vdsm/network/api.py, line 315, in addNetwork
 netEnt.configure(**options)
 File /usr/share/vdsm/network/models.py, line 169, in configure
 self.configurator.configureBridge(self, **opts)
 File /usr/share/vdsm/network/configurators/ifcfg.py, line 88, in
 configureBr idge
 ifup(bridge.name, bridge.ipConfig.async)
 File /usr/share/vdsm/network/configurators/ifcfg.py, line 822, in ifup
 rc, out, err = _ifup(iface)
 File /usr/share/vdsm/network/configurators/ifcfg.py, line 811, in _ifup
 raise ConfigNetworkError(ERR_FAILED_IFUP, out[-1] if out else '')
 network.errors.ConfigNetworkError: (29, 'Determining IP information for
 wan... f ailed.')
 vdsm: stopped during execute restore_nets task (task returned with error code
 1) .
 vdsm start [FAILED]
 
 
 Matias SPAINI
 Tecnología de Información
 MONALISA Internacional S.A.
 Av. Boquerón 310
 Ciudad del Este – PARAGUAY
 Tel + 595 61 500 645
 Fax + 595 61 512 695
 matias.spa...@monalisa.com.py www.monalisa.com.py
 
 
 ---
 Antes de imprimir, recuérdese de su compromiso con el Medio Ambiente
 Aviso: Este mensaje es dirigido para su destinatario y contiene
 informaciones que no pueden ser usadas por otras personas que no sean su(s)
 destinatario(s). La retransmisión del contenido no está autorizada fuera del
 contexto de su envío y a quien corresponde. El uso no autorizado de la
 información en este mensaje se halla penado por las leyes vigentes en todo
 el mundo. Si ha recibido este mensaje por error, por favor bórrala y
 notifique al remitente en la brevedad posible. El contenido de este mensaje
 no es responsabilidad de la Empresa y debe ser atribuido siempre a su autor.
 Gracias.
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Node upgrade issue

2014-11-20 Thread Fabian Deutsch
- Original Message -
 Hi everyone !
 
  I am  looking something about ovirt node upgrade .
 
 we are using a old version of ovirt node 3.1.  Also I test ovirt node
 3.5 . Somethings is puzzling me .
 
 1, In ovirt node 3.1 , it seemed I can't upgrade ovirt node ,because of
 Hostvg's existence.
 In Hostvg , something like ssh keys are stored here, I know this is
 important . Is it possible to let the node  inherit these things ? so that
 I can upgrade the node without remove things in hostvg .

Hey,

could you please explain the exact flow you tried?

  2, I made a ovirt-node-iso 3.5 version myself . But when I try to
 install it , it fails because the issue of selinux .
 
  In shell mode , type localectl ,it shows this . after setenforce 0 ,
 localectl will work well .

What branch did you use to build your iso?

And for SELinux denials: Catch /var/log/audit/audit.log and create new rules 
using
audit2allow.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Latest ovirt-node release/installation

2014-11-16 Thread Fabian Deutsch
- Original Message -
 On Fri, Nov 14, 2014 at 3:52 PM, Fabian Deutsch fdeut...@redhat.com wrote:
 
  - Original Message -
   Thanks to everyone for the answers.  That helps clarify some basics for
   me.  I prefer to try and implement ovirt-node for the reasons stated
  above
   (small, defined OS with a smaller security/management footprint), but
  now I
   debate using CentOS 6 or RHEL 6.  I feel that oVirt-node is very
  important
   to being able to get an environment up and running securely without too
   much overhead, but perhaps I need to consider minimal OS installs +
  latest
   gluster release + 3.5 oVirt at this time.
 
  oVirt node can (btw) be deployed using PXE (Foreman, Cobbler), USB and CD
  media, and virtual media.
 
 
 That very much interests me since I utilize Cobbler currently for all of my
 provisioning.  I would assume that basically one would kickstart it like
 any other RHEL-based release.  Are you aware of any document that describes
 Cobbler+oVirt-Node by chance?

Hey,

for Node it's a bit different.
You can just use the kernel+initrd and some kernel arguments to deploy it via 
PXE.
No kickstart needed.

Our documentation is a bit lacking the details, but you can consult this docs:
http://red.ht/1xNNXak
http://red.ht/1vkmLRc

The should work for Node as well.

   One thing I was curious about is gluster support in oVirt-node.  What is
   the current status as far as glusterfs version and saving settings, etc.?
 
  The pre-release build from today contains glusterfs-3.6.
 
 
 Great!  Thanks for the information.  I've downloaded that ISO and I'm
 working on getting that deployed on a couple of test blades.

Great!
Let me know anything you would let us to know :)

- fabian

 
  - fabian
 
   Thanks again!
  
   Chris
  
   On Fri, Nov 14, 2014 at 6:30 AM, Fabian Deutsch fdeut...@redhat.com
  wrote:
  
- Original Message -
 I sincerely hope that this is not answered elsewhere as I've done
  several
 searches and have yet to find a solid answer.  I have three (what I
believe
 to be) basic questions (with perhaps some subs there):

 1)  What is the latest oVirt-node release and where would one
  download it
 (I appear to only see 3.4 -based releases of the ISO available)?  It
  is
 3.5-based and/or is there an upgrade path?  Which glusterfs release
  is
 currently included with oVirt-node?
   
Hey,
   
there are some 3.5 pre-release isos available here:
http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/
   
They are quite old. The reason why there is still no Node, is that we
  are
experiencing
installation problems after CentOS 6.6 got released.
   
That is why there is no Node for 3.5 yet, becuase we don't want to
  provide
a Node which is dead on arrival. This ain't fun for anyone.
   
 2) As I understand it, newer releases of oVirt-node allow you to do
  an
 installation of the self-hosted engine at this time.  Is that
  correct?
   
Yes, that will work. Due to problems mentioned above, we still need to
  do
some
fixes to the hosted-engine part of Node, but once they land, HE will
  work
on Node.
   
 3) Is there any functionality that one would be losing out on by
deploying
 oVirt via oVirt-node vs. using full-OS installation?  Which is the
  more
 recommended?
   
Yes, ovirt-node is not as customizable as a regular host.
I.e. you can not (easily) modify the boot process, or install custom
  rpms.
   
Sometimes this is seen as a restriction, other see this as a well
  defined
environment.
   
 Again, I apologize if these questions are covered somewhere, but I
  felt
 like asking them in a direct fashion so as to clear up my own
ignorance.  I
 appreciate any feedback and information that you could share.
   
No, no worries. There weren't any Node updates (besides the weekly
  meeting
minutes)
for a while.
   
We still traget to release Node for oVirt 3.5 ASAP.
   
- fabian
   
   
 Thanks,

 Chris

 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

   
  
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
  
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Latest ovirt-node release/installation

2014-11-14 Thread Fabian Deutsch
- Original Message -
 I sincerely hope that this is not answered elsewhere as I've done several
 searches and have yet to find a solid answer.  I have three (what I believe
 to be) basic questions (with perhaps some subs there):
 
 1)  What is the latest oVirt-node release and where would one download it
 (I appear to only see 3.4 -based releases of the ISO available)?  It is
 3.5-based and/or is there an upgrade path?  Which glusterfs release is
 currently included with oVirt-node?

Hey,

there are some 3.5 pre-release isos available here:
http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/

They are quite old. The reason why there is still no Node, is that we are 
experiencing
installation problems after CentOS 6.6 got released.

That is why there is no Node for 3.5 yet, becuase we don't want to provide
a Node which is dead on arrival. This ain't fun for anyone.

 2) As I understand it, newer releases of oVirt-node allow you to do an
 installation of the self-hosted engine at this time.  Is that correct?

Yes, that will work. Due to problems mentioned above, we still need to do some
fixes to the hosted-engine part of Node, but once they land, HE will work on 
Node.

 3) Is there any functionality that one would be losing out on by deploying
 oVirt via oVirt-node vs. using full-OS installation?  Which is the more
 recommended?

Yes, ovirt-node is not as customizable as a regular host.
I.e. you can not (easily) modify the boot process, or install custom rpms.

Sometimes this is seen as a restriction, other see this as a well defined
environment.

 Again, I apologize if these questions are covered somewhere, but I felt
 like asking them in a direct fashion so as to clear up my own ignorance.  I
 appreciate any feedback and information that you could share.

No, no worries. There weren't any Node updates (besides the weekly meeting 
minutes)
for a while.

We still traget to release Node for oVirt 3.5 ASAP.

- fabian


 Thanks,
 
 Chris
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Node 3.5 build available for testing

2014-11-14 Thread Fabian Deutsch
Hey,

finally we reached a stage again where we can provide an oVirt Node.
The following oVirt Node ISO contains the oVirt 3.5.0 packages.

Please go ahead, test it and provide feedback in case of issues.

https://fedorapeople.org/~fabiand/node/3.5/ovirt-node-iso-3.5.0.ovirt35.20141114.0.el6.iso

To learn something more about oVirt Node please visit
http://www.ovirt.org/Node
http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Node


Please note that this is still an pre-release, and we are aware that there are 
still
issues with the hosted-engine part of Node.
But this part will see some (already pending updates) in the near future.


Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Latest ovirt-node release/installation

2014-11-14 Thread Fabian Deutsch
- Original Message -
 Thanks to everyone for the answers.  That helps clarify some basics for
 me.  I prefer to try and implement ovirt-node for the reasons stated above
 (small, defined OS with a smaller security/management footprint), but now I
 debate using CentOS 6 or RHEL 6.  I feel that oVirt-node is very important
 to being able to get an environment up and running securely without too
 much overhead, but perhaps I need to consider minimal OS installs + latest
 gluster release + 3.5 oVirt at this time.

oVirt node can (btw) be deployed using PXE (Foreman, Cobbler), USB and CD 
media, and virtual media.

 One thing I was curious about is gluster support in oVirt-node.  What is
 the current status as far as glusterfs version and saving settings, etc.?

The pre-release build from today contains glusterfs-3.6.

- fabian

 Thanks again!
 
 Chris
 
 On Fri, Nov 14, 2014 at 6:30 AM, Fabian Deutsch fdeut...@redhat.com wrote:
 
  - Original Message -
   I sincerely hope that this is not answered elsewhere as I've done several
   searches and have yet to find a solid answer.  I have three (what I
  believe
   to be) basic questions (with perhaps some subs there):
  
   1)  What is the latest oVirt-node release and where would one download it
   (I appear to only see 3.4 -based releases of the ISO available)?  It is
   3.5-based and/or is there an upgrade path?  Which glusterfs release is
   currently included with oVirt-node?
 
  Hey,
 
  there are some 3.5 pre-release isos available here:
  http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/
 
  They are quite old. The reason why there is still no Node, is that we are
  experiencing
  installation problems after CentOS 6.6 got released.
 
  That is why there is no Node for 3.5 yet, becuase we don't want to provide
  a Node which is dead on arrival. This ain't fun for anyone.
 
   2) As I understand it, newer releases of oVirt-node allow you to do an
   installation of the self-hosted engine at this time.  Is that correct?
 
  Yes, that will work. Due to problems mentioned above, we still need to do
  some
  fixes to the hosted-engine part of Node, but once they land, HE will work
  on Node.
 
   3) Is there any functionality that one would be losing out on by
  deploying
   oVirt via oVirt-node vs. using full-OS installation?  Which is the more
   recommended?
 
  Yes, ovirt-node is not as customizable as a regular host.
  I.e. you can not (easily) modify the boot process, or install custom rpms.
 
  Sometimes this is seen as a restriction, other see this as a well defined
  environment.
 
   Again, I apologize if these questions are covered somewhere, but I felt
   like asking them in a direct fashion so as to clear up my own
  ignorance.  I
   appreciate any feedback and information that you could share.
 
  No, no worries. There weren't any Node updates (besides the weekly meeting
  minutes)
  for a while.
 
  We still traget to release Node for oVirt 3.5 ASAP.
 
  - fabian
 
 
   Thanks,
  
   Chris
  
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
  
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-11-04 Thread Fabian Deutsch
- Original Message -
 On Sun, Sep 14, 2014 at 03:17:39PM +0300, Itamar Heim wrote:
  On 09/12/2014 03:22 PM, Itamar Heim wrote:
  With oVirt 3.5 nearing GA, time to ask for what do you want to see in
  oVirt 3.6?
  
  
  Even the short list of items mentions so far are big features we would need
  to do justice with.
  this means probably a slightly longer cycle than the 6 months we currently
  do.
 
 We're not so good in keeping up with deadlines - our recent 3.5 version
 slipped for 2.5 months past the original plan. With longer cycles, this
 is even harder to control.
 
 Can we instead break the heavier features to smaller phases, that are
 easier to maintain, and deliver the complete feature in 3.7?

Hey,

yep, I think this is a good idea to get control over the big features.

- fabian

  with many of the features requiring way newer versions of some of the
  components, I think we should plan for 3.6 cluster to require an .el7
  host
  (expecting even 7.1 to be out before we release oVirt 3.6).
  
  so i want us to plan for:
  - oVirt 3.6 supports .el6 and .el7 hosts in 3.5 cluster (and for fedora
- fc20?)
  - oVirt 3.6 supports .el7 in 3.6 cluster (and for fedora - fc21?)
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] importing a qcow2 disk into ovirt 3.5?

2014-10-21 Thread Fabian Deutsch
- Original Message -
 I've just been doing some searching to try and work out how to get a vmware
 windows VM into ovirt.
 It seems that the newest virtv2v has dropped support for importing from an
 ESXi standalone machine - and now only works with vcenter.  I didn't have
 any success with using the current virt-v2v attaching to an ESXi host.
 
 
 I've prepared the VM by first removing the vmware tools and have installled
 the various virtio drivers, as well as running the 'mergeide' registry file
 to enable IDE.  I've used 'qemu-img' to convirt this VMDK file to QCOW2.  It
 does not appear that there is a straightforward way for me to import this
 new qcow2 disk into ovirt.
 
 It seems my best option at the moment is to export the VMware VM as an OVA
 and then try and use a newer virt-v2v to import this into ovirt.

Hey Paul,

I think the OVA is what you need for Engine.
Once you get that file you can import it.
So: Use the OVA offered by the VMWare thing, or use a script like this one:

http://jenkins.ovirt.org/user/fabiand/my-views/view/Node/job/ovirt-appliance_engine-3.5_master_merged/ws/ovirt-appliance/engine-appliance/scripts/create_ova.py
depends on https://github.com/redhat-imaging/imagefactory

To convert the qcow2 to an OVA.

- fabian

 Alternatively I could construct a VM in virt-manager and attach the converted
 qcow2 disk to it, and then use virt-v2v to import this into ovirt.
 
 Can someone suggest an alternative course of action?  It seems strange that I
 can't just import a disk into ovirt,  construct a VM and attach the disk.
 
 Is there anything int he works to make this process easier?
 
 Thanks,
 Paul
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] importing a qcow2 disk into ovirt 3.5?

2014-10-21 Thread Fabian Deutsch
- Original Message -
 On Tue, Oct 21, 2014 at 3:23 PM, Fabian Deutsch fdeut...@redhat.com wrote:
 
 
 
  Hey Paul,
 
  I think the OVA is what you need for Engine.
  Once you get that file you can import it.
  So: Use the OVA offered by the VMWare thing, or use a script like this one:
 
 
  http://jenkins.ovirt.org/user/fabiand/my-views/view/Node/job/ovirt-appliance_engine-3.5_master_merged/ws/ovirt-appliance/engine-appliance/scripts/create_ova.py
  depends on https://github.com/redhat-imaging/imagefactory
 
  To convert the qcow2 to an OVA.
 
  - fabian
 
 
 I remember not so much time ago that VMware generated OVA format was NOT
 compatible for import into oVirt/RHEV
 see for example this thread:
 http://lists.ovirt.org/pipermail/users/2014-August/027059.html

Oh, I didn't recall that a few minutes ago.

 Did anything change in the mean time and is perhaps the new virt-v2v
 available with ova functionality in it?

AFAIK the new virt-v2v is still not supporting OVAs.

That means, we need to create the ovas ourselfs using some script (like the one 
above).

- fabian

 Gianluca
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Node 3.5 20140912 for the TestDay

2014-09-29 Thread Fabian Deutsch
- Original Message -
 Hi.
 
 I have a issue with 3.1.0_master (20140912.0) on following hardware:
 
 ProLiant BL460c Gen8
 FLB Adapter 1: HP FlexFabric 10Gb 2-port 554FLB Adapter
 
 I can install node but when booting the server I get I/O errors as if LUN is
 offline.

Hey Raul,

can you describe these errors or provide a screenshot/log?

 Logging into admin (TUI) console is not possible.
 
 If I reboot and set the rootpw I can log in and see that /var/log is mounted
 read-only:
 
 mount: cannot remount block device /dev/mapper/HostVG-Logging read-write, is
 write-protected
 
 multipath -ll shows that all paths are OK, but if I look at dmesg ouput, I
 see device-mapper: multipath: Failing path x:xx. was logged at boot for all
 paths.
 
 I have successfully installed previous node iso version (3.0) and plain
 CentOS on this hardware.

Did you try booting in permissive mode (appending enforcing=0 to the kernel 
cmdline).

Greetings
fabian

 Can you help?
 
 - Original Message -
  From: Daniel Helgenberger daniel.helgenber...@m-box.de
  To: Fabian Deutsch fdeut...@redhat.com
  Cc: users users@ovirt.org, de...@ovirt.org
  Sent: Wednesday, 17 September, 2014 2:50:19 PM
  Subject: Re: [ovirt-users] oVirt Node 3.5 20140912 for the TestDay
  
  
  On 17.09.2014 13:23, Fabian Deutsch wrote:
   Hey Daniel,
  
   - Original Message -
   Hello Fabian,
  
   I do not know if the feature has made it - can I run a hosted engine
   with node?
   Yep - That is one of the things under test :)
  Great! This is a major node feature for me.  Sadly I can't make it in
  time for the 3rd test day, but latest next week I'll give it a shot (and
  maybe there will be a 4th test day, since I have FC HBAs in my lab
  machines - Sven complained about that)
  
  Cheers.
   The iso below includes hosted engine support, that means, Node contains a
   page which you can use to start the hosted engine setup.
  
   Please note that the appliance which is intended for hosted-engine
   (ovirt-engine-appliance) is currently broken, but hosted-engine setup can
   be run without using that appliance.
   You just need to setup your own OS and oVirt.
  
   - fabian
  
   Thanks!
  
   On 16.09.2014 21:57, Fabian Deutsch wrote:
   Hey,
  
   to be able to give Node a go on the oVirt 3.5 TestDay, we provide a
   fresh
   build of Node including the 3.5rc2 package here:
  
   http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140912.el6.iso
  
   We did not see any SELinux denials, but if you experience any problems,
   please try to install Node in permissive mode by appending
enfcoring=0
   during the installation.
  
   Any feedback and bug reports are welcome.
  
   On behalf of the Node team
   - fabian
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
  
   --
   Daniel Helgenberger
   m box bewegtbild GmbH
  
   P: +49/30/2408781-22
   F: +49/30/2408781-10
  
   ACKERSTR. 19
   D-10115 BERLIN
  
  
   www.m-box.de  www.monkeymen.tv
  
   Geschäftsführer: Martin Retschitzegger / Michaela Göllner
   Handeslregister: Amtsgericht Charlottenburg / HRB 112767
  
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
  
  
  --
  Daniel Helgenberger
  m box bewegtbild GmbH
  
  P: +49/30/2408781-22
  F: +49/30/2408781-10
  
  ACKERSTR. 19
  D-10115 BERLIN
  
  
  www.m-box.de  www.monkeymen.tv
  
  Geschäftsführer: Martin Retschitzegger / Michaela Göllner
  Handeslregister: Amtsgericht Charlottenburg / HRB 112767
  
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
  
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Engine Virtual Appliance for 3.5 is ready for testing [ISSUES]

2014-09-17 Thread Fabian Deutsch


- Original Message -
 In addition, I've uploaded this image to the oVirt public glance repository,
 under the name oVirt 3.5 Appliance - For testing purposes only (Fedora).
 So, if you already have an oVirt environment, and you would like to play with
 the new one using this appliance, all you need to do is import it as a
 template, and create VMs from it.
 (see
 http://ovedou.blogspot.co.il/2014/03/importing-glance-images-as-ovirt.html
 for details on how to do that).
 
 Haven't tested this image yet, but I'm importing it as a template as we speak
 :-)

Hey,

I just discovered that the appliance has issues and not root password can be 
set.
I'm working on this, please remove it from glance again (kudos for uploading it 
so quick!) and expect an update later today.

- fabian


 Thanks,
 Oved
 
 - Original Message -
  From: Fabian Deutsch fdeut...@redhat.com
  To: de...@ovirt.org, users@ovirt.org
  Sent: Tuesday, September 16, 2014 11:32:38 PM
  Subject: [ovirt-users] oVirt Engine Virtual Appliance for 3.5 is ready for
  testing
  
  Hello!
  
  The ready-to-use Engine appliance is now building again and should contain
  the the latest and greatest 3.5rc2 packages.
  That appliance can be used for testing hosted engine, as well as testing
  oVirt Engine 3.5 in general.
  
  The ova (intended to be used with hosted engine setup) and the qcow2
  (intended to be used for testing) images can be found here:
  http://jenkins.ovirt.org/view/All/job/ovirt-appliance_master_merged/
  
  All relevant packages are pre-installed, but the appliance still needs to
  be
  configured.
  To configure the appliance you need to run:
  
  $ engine-setup --offline --config-append=ovirt-engine-answers
  
  inside the appliance after downloading it.
  
  
  Please let us know if you have any issues.
  
  Greetings
  fabian
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
  
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Node 3.5 20140912 for the TestDay

2014-09-17 Thread Fabian Deutsch
Hey Daniel,

- Original Message -
 Hello Fabian,
 
 I do not know if the feature has made it - can I run a hosted engine
 with node?

Yep - That is one of the things under test :)

The iso below includes hosted engine support, that means, Node contains a page 
which you can use to start the hosted engine setup.

Please note that the appliance which is intended for hosted-engine 
(ovirt-engine-appliance) is currently broken, but hosted-engine setup can be 
run without using that appliance.
You just need to setup your own OS and oVirt.

- fabian

 Thanks!
 
 On 16.09.2014 21:57, Fabian Deutsch wrote:
  Hey,
 
  to be able to give Node a go on the oVirt 3.5 TestDay, we provide a fresh
  build of Node including the 3.5rc2 package here:
 
  http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140912.el6.iso
 
  We did not see any SELinux denials, but if you experience any problems,
  please try to install Node in permissive mode by appending
   enfcoring=0
  during the installation.
 
  Any feedback and bug reports are welcome.
 
  On behalf of the Node team
  - fabian
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 
 --
 Daniel Helgenberger
 m box bewegtbild GmbH
 
 P: +49/30/2408781-22
 F: +49/30/2408781-10
 
 ACKERSTR. 19
 D-10115 BERLIN
 
 
 www.m-box.de  www.monkeymen.tv
 
 Geschäftsführer: Martin Retschitzegger / Michaela Göllner
 Handeslregister: Amtsgericht Charlottenburg / HRB 112767
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Node 3.5 20140912 for the TestDay

2014-09-16 Thread Fabian Deutsch
Hey,

to be able to give Node a go on the oVirt 3.5 TestDay, we provide a fresh build 
of Node including the 3.5rc2 package here:

http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140912.el6.iso

We did not see any SELinux denials, but if you experience any problems, please 
try to install Node in permissive mode by appending 
 enfcoring=0
during the installation.

Any feedback and bug reports are welcome.

On behalf of the Node team
- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Engine Virtual Appliance for 3.5 is ready for testing

2014-09-16 Thread Fabian Deutsch
Hello!

The ready-to-use Engine appliance is now building again and should contain the 
the latest and greatest 3.5rc2 packages.
That appliance can be used for testing hosted engine, as well as testing oVirt 
Engine 3.5 in general.

The ova (intended to be used with hosted engine setup) and the qcow2 (intended 
to be used for testing) images can be found here:
http://jenkins.ovirt.org/view/All/job/ovirt-appliance_master_merged/

All relevant packages are pre-installed, but the appliance still needs to be 
configured.
To configure the appliance you need to run:

$ engine-setup --offline --config-append=ovirt-engine-answers

inside the appliance after downloading it.


Please let us know if you have any issues.

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] [RFI] oVirt 3.6 Planning

2014-09-15 Thread Fabian Deutsch
Auto-configuration of the oVirt Virtual Appliance by hosted-engine setup.

Basically give hosted-engine setup the features to configure the appliance to 
work well.
Especially take care about host+guest side OS level configuration like i.e. 
networks.

- fabian

- Original Message -
 With oVirt 3.5 nearing GA, time to ask for what do you want to see in
 oVirt 3.6?
 
 Thanks,
 Itamar
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] [ANN] oVirt 3.5.0 Second Release Candidate is now available for testing

2014-09-12 Thread Fabian Deutsch
- Original Message -
 On Thu, Sep 11, 2014 at 5:55 PM, Sandro Bonazzola sbona...@redhat.com
 wrote:
 
 [snip]
 
  Please refer to release notes [1] for Installation / Upgrade instructions.
  New oVirt Live, oVirt Guest Tools and oVirt Node ISO will be available
  soon as well[2].
 
 
 [snip]
 
 
  [1] http://www.ovirt.org/OVirt_3.5_Release_Notes
  [2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/
 
  --
 
 
 Hello,
 release notes page still point to the 20140630 iso for oVirt node.
 In the mean time that [2] is updated with a new iso, do you think that one
 of the following isos should be better for testing, eg 20140827 or
 20140805?
 

Hey Gianluca,

now that the 3.5 rc 2 repo is ready we'll also providing an update oVirt Node 
soon.

Pleas stay tuned, and expect an updated ISO until the test day at latest.

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Fwd: RE: FC QLogic question

2014-09-11 Thread Fabian Deutsch
Hey Bill and Daniel,

it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl 
is IMHO related to graphics).
Once we know that I'll see if the bug below fixes it.

I'd need your help to verify that we are also including all relevant 
dependencies.

Thanks
- fabian

- Original Message -
 
 
   
 
   
 
   
 
   
 
 
 Hi Daniel,
 
 I did a lsmod | grep qxl  and it returned nothing...  did you perhaps mean
 qla?
 
 [root@ovirt141 ~]# lsmod | grep qla
 qla2xxx   466573  56
 
 I think that is the one
 
 lsscsi does list all of the LUNs...  so that's working!
 
 But nothing in ovirt engine when I try to add a storage domain.
 
 Thanks again, I guess I will try and get a bit further with the installs I
 have...
 
 Bill
 
 
 
 -Original Message-
 From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de]
 Sent: 11 September 2014 11:53
 To: Bill Dossett
 Subject: Re: [ovirt-users] FC QLogic question
 
 On 11.09.2014 12:17, Bill Dossett wrote:
  Thanks for responding Daniel.
 Never mind!
   I was wondering and thought the message may be irrelevant.  But yes,
  it doesn't appear to be working.  When I try to add a FC storage
  domain, no hosts are showing in the drop down box of hosts.  I have
  loaded the latests ovirtnode (3.4.something...) on two hosts now and
  neither are working.
 Lets first try to isolate your FC issure. So you are using the latest
 ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore
 should support Qlogic adapters out of the box (IMHO they are the best
 supported HBAs in Linux).
 Please try a:
 # lsmod  | grep qxl
 to see whatever the qxl module is loaded. Keep in mind you can run into
 problems with other conrollers in your host, though I only had this with LSI
 SAS / FC controllers so far.
 
 Further check on the FC switch if the N port is logged in and the zoning is
 correct.
 
 Finally, check with
 # lsscsi
 if you can see the luns.
 
  Also having a lot of issues with configuring the network.  I configure
  an interface I can ping it, but it shows as unconfigured... on one host
  I have added it to the manager and I see the interfaces anyway, but on
  the second host I configure the eth0, I can ping it, it added to the
  ovirt engine but it shows no NICs.  Should I be using an earlier version
  maybe?
 
  thanks again and best regards.
 
 
  *Bill Dossett*
  *Virtualisation Architect*
  *Pitney Bowes - Tech Central***
  6 Hercules Way, 600 Leavesden Park
  Watford, WD25 7GS
  Phone(+44) (0)1923 279353 | VOIP: 54739353
  Mobile(+44) (0)7775 908612
  bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com
  http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy
  Anywhere [HERE
  http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident
  /newIncident.aspx]takes
  less than a minute*
 
  *ManageIQ User Guide available* [*HERE
  https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20
  v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and
  information [HERE]
  http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx*
 
  On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger
  daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de wrote:
 
   Hello Bill,
  
   what are your problems acually? Is fibre channel not working (as
   expected)?
  
   The log snippet you provided is completly normal and the messages
   can safely be ignored. This is also unrelated to oVirt but rather
   CentOS (or the distro you are running) I suppose.
  
   Cheers!
  
   On 11.09.2014 10:51, Bill Dossett wrote:
   Hi,
  
   I seem to have run into a problem setting up ovirt with Fibre Channel
   storage.
  
   I have a 2MBs SAN and qlogic cards in the nodes.  I used this same
   setup with RHEV about 6 months ago and it just worked, storage was
   there no problems.  Now booting with ovirtnode distro, I am seeing
  
   Sep  9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-0091:1:
   Firmware images can be retrieved from:
   http://ldriver.qlogic.com/firmware/.
  
   Sep  9 08:01:27 localhost kernel: scsi1 : qla2xxx
  
   Sep  9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fb:1:
   QLogic QLE2460
   - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x.
  
   Sep  9 08:01:27 localhost kernel: qla2xxx [:0c:00.0]-00fc:1:
   ISP2432: PCIe (2.5GT/s x4) @ :0c:00.0 hdma+ host#=1 fw=4.00.26 (2).
  
   Sep  9 08:01:27 localhost kernel: ata_piix :00:1f.1: PCI INT A
   - GSI 16 (level, low) - IRQ 16
  
   I have googled the firmware error and it says some cards need a
   firmware flash and some don't.  These are pretty standard HBAs so I
   would think they would be supported out of the box, but maybe not.
   Looking at trying to add the firmware looked kind of complex - if I
   need to do this, does anyone know of a nice and easy howto guide on
   this.  I'm just getting started with ovirt and appreciate any help
  
  
   Thanks
  
   *Bill 

Re: [ovirt-users] Fwd: RE: FC QLogic question

2014-09-11 Thread Fabian Deutsch
Hey Daniel,

- Original Message -
 
 On 11.09.2014 14:09, Fabian Deutsch wrote:
  Hey Bill and Daniel,
 
  it would indeed be interesting - mandatory - to know if it's qla* or qxl
  (qxl is IMHO related to graphics).
  Once we know that I'll see if the bug below fixes it.
 Hello Fabian,
 indeed this was my mistake; while typing the mail I was reading on the
 spice website - so qla is the correct module of course! I already
 replied this to Bill but forgot to cc the list also ...
 
 Also, for the node iso it would make little sense to have the qlx module
 loaded. For completeness, I attach my answer to Bill.

Thanks :)

So to summarize: 
The adapter is recognized on Node?

But it does not show up in Engine?

Thanks
- fabian

 
  I'd need your help to verify that we are also including all relevant
  dependencies.
 
  Thanks
  - fabian
 
  - Original Message -
 
 On 11.09.2014 13:05, Bill Dossett wrote:
 
  Hi Daniel,
 
  I did a lsmod | grep qxl  and it returned nothing...  did you perhaps mean
  qla?
 
  [root@ovirt141 ~]# lsmod | grep qla
  qla2xxx   466573  56
 
  I think that is the one
 
 Indeed, sorry for that.
 
  lsscsi does list all of the LUNs...  so that's working!
 
 Great!
 
  But nothing in ovirt engine when I try to add a storage domain.
 
 Please check back in ovirt engine, with Hosts / Hardware info. You
 should see the adapter there, along with  WWN's ect.
 
 I am not quite sure, but AFAIK the node uses dm-multipath by default
 (for iscsi multipathing). So what does:
 # multipath -ll
 list?
 
 Thanks again, I guess I will try and get a bit further with the installs I
 have...
 
 Bill
 
 
 
 
 
 
 
 
 
 
 
  Hi Daniel,
 
  I did a lsmod | grep qxl  and it returned nothing...  did you perhaps mean
  qla?
 
  [root@ovirt141 ~]# lsmod | grep qla
  qla2xxx   466573  56
 
  I think that is the one
 
  lsscsi does list all of the LUNs...  so that's working!
 
  But nothing in ovirt engine when I try to add a storage domain.
 
  Thanks again, I guess I will try and get a bit further with the installs I
  have...
 
  Bill
 
 
 
  -Original Message-
  From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de]
  Sent: 11 September 2014 11:53
  To: Bill Dossett
  Subject: Re: [ovirt-users] FC QLogic question
 
  On 11.09.2014 12:17, Bill Dossett wrote:
  Thanks for responding Daniel.
  Never mind!
   I was wondering and thought the message may be irrelevant.  But yes,
  it doesn't appear to be working.  When I try to add a FC storage
  domain, no hosts are showing in the drop down box of hosts.  I have
  loaded the latests ovirtnode (3.4.something...) on two hosts now and
  neither are working.
  Lets first try to isolate your FC issure. So you are using the latest
  ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore
  should support Qlogic adapters out of the box (IMHO they are the best
  supported HBAs in Linux).
  Please try a:
  # lsmod  | grep qxl
  to see whatever the qxl module is loaded. Keep in mind you can run into
  problems with other conrollers in your host, though I only had this with
  LSI
  SAS / FC controllers so far.
 
  Further check on the FC switch if the N port is logged in and the zoning
  is
  correct.
 
  Finally, check with
  # lsscsi
  if you can see the luns.
 
  Also having a lot of issues with configuring the network.  I configure
  an interface I can ping it, but it shows as unconfigured... on one host
  I have added it to the manager and I see the interfaces anyway, but on
  the second host I configure the eth0, I can ping it, it added to the
  ovirt engine but it shows no NICs.  Should I be using an earlier version
  maybe?
 
  thanks again and best regards.
 
 
  *Bill Dossett*
  *Virtualisation Architect*
  *Pitney Bowes - Tech Central***
  6 Hercules Way, 600 Leavesden Park
  Watford, WD25 7GS
  Phone(+44) (0)1923 279353 | VOIP: 54739353
  Mobile(+44) (0)7775 908612
  bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com
  http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy
  Anywhere [HERE
  http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident
  /newIncident.aspx]takes
  less than a minute*
 
  *ManageIQ User Guide available* [*HERE
  https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20
  v4.pdf*] *Check out the ManageIQ Blog for recent enhancements and
  information [HERE]
  http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx*
 
  On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger
  daniel.helgenber...@m-box.de mailto:daniel.helgenber...@m-box.de
  wrote:
 
  Hello Bill,
 
  what are your problems acually? Is fibre channel not working (as
  expected)?
 
  The log snippet you provided is completly normal and the messages
  can safely be ignored. This is also unrelated to oVirt but rather
  CentOS (or the distro you are running) I suppose.
 
  Cheers!
 
  On 11.09.2014 10:51, Bill Dossett wrote:
  Hi,
 
  I seem

Re: [ovirt-users] Fwd: RE: FC QLogic question

2014-09-11 Thread Fabian Deutsch
- Original Message -
 
 On 11.09.2014 14:23, Fabian Deutsch wrote:
  Hey Daniel,
 
  - Original Message -
  On 11.09.2014 14:09, Fabian Deutsch wrote:
  Hey Bill and Daniel,
 
  it would indeed be interesting - mandatory - to know if it's qla* or qxl
  (qxl is IMHO related to graphics).
  Once we know that I'll see if the bug below fixes it.
  Hello Fabian,
  indeed this was my mistake; while typing the mail I was reading on the
  spice website - so qla is the correct module of course! I already
  replied this to Bill but forgot to cc the list also ...
 
  Also, for the node iso it would make little sense to have the qlx module
  loaded. For completeness, I attach my answer to Bill.
  Thanks :)
 
  So to summarize:
  The adapter is recognized on Node?
 
  But it does not show up in Engine?

 Bill has to tell, but I think so. I suggested to him this might be

Ah, I mixed you an Bill up in the thread.

 because of dm-multipath, multipath.conf might blacklist here. My nodes
 are plain EL6 and I have multipath enabled - but I do not know if
 ovirt-node filters for dm-mp devnodes only by default (this would make
 sense because of iscsi-multipathing in ovirt 3.4).

Well, we did some multipath changes lately. Let#s see what Bill says:

Bill,
what node are you using?
What does multipath -l say?
How does /dev/mapper/* and /dev/multipath.conf look like?

And is the disk appearing on Node and/or Engine?

Thanks!
fabian

 Maybe you can help out on this topic?
 
 Thanks!
 
  Thanks
  - fabian
 
  I'd need your help to verify that we are also including all relevant
  dependencies.
 
  Thanks
  - fabian
 
  - Original Message -
  On 11.09.2014 13:05, Bill Dossett wrote:
 
  Hi Daniel,
 
  I did a lsmod | grep qxl  and it returned nothing...  did you perhaps
  mean
  qla?
 
  [root@ovirt141 ~]# lsmod | grep qla
  qla2xxx   466573  56
 
  I think that is the one
  Indeed, sorry for that.
 
  lsscsi does list all of the LUNs...  so that's working!
  Great!
 
  But nothing in ovirt engine when I try to add a storage domain.
  Please check back in ovirt engine, with Hosts / Hardware info. You
  should see the adapter there, along with  WWN's ect.
 
  I am not quite sure, but AFAIK the node uses dm-multipath by default
  (for iscsi multipathing). So what does:
  # multipath -ll
  list?
 
  Thanks again, I guess I will try and get a bit further with the installs I
  have...
 
  Bill
 
   
 
   
 
   
 
   
 
 
  Hi Daniel,
 
  I did a lsmod | grep qxl  and it returned nothing...  did you perhaps
  mean
  qla?
 
  [root@ovirt141 ~]# lsmod | grep qla
  qla2xxx   466573  56
 
  I think that is the one
 
  lsscsi does list all of the LUNs...  so that's working!
 
  But nothing in ovirt engine when I try to add a storage domain.
 
  Thanks again, I guess I will try and get a bit further with the installs
  I
  have...
 
  Bill
 
 
 
  -Original Message-
  From: Daniel Helgenberger [mailto:daniel.helgenber...@m-box.de]
  Sent: 11 September 2014 11:53
  To: Bill Dossett
  Subject: Re: [ovirt-users] FC QLogic question
 
  On 11.09.2014 12:17, Bill Dossett wrote:
  Thanks for responding Daniel.
  Never mind!
   I was wondering and thought the message may be irrelevant.  But yes,
  it doesn't appear to be working.  When I try to add a FC storage
  domain, no hosts are showing in the drop down box of hosts.  I have
  loaded the latests ovirtnode (3.4.something...) on two hosts now and
  neither are working.
  Lets first try to isolate your FC issure. So you are using the latest
  ovirt-node? EL6? Keep in mind, the kernel is standard Linux and
  therefore
  should support Qlogic adapters out of the box (IMHO they are the best
  supported HBAs in Linux).
  Please try a:
  # lsmod  | grep qxl
  to see whatever the qxl module is loaded. Keep in mind you can run into
  problems with other conrollers in your host, though I only had this with
  LSI
  SAS / FC controllers so far.
 
  Further check on the FC switch if the N port is logged in and the zoning
  is
  correct.
 
  Finally, check with
  # lsscsi
  if you can see the luns.
 
  Also having a lot of issues with configuring the network.  I configure
  an interface I can ping it, but it shows as unconfigured... on one host
  I have added it to the manager and I see the interfaces anyway, but on
  the second host I configure the eth0, I can ping it, it added to the
  ovirt engine but it shows no NICs.  Should I be using an earlier
  version
  maybe?
 
  thanks again and best regards.
 
 
  *Bill Dossett*
  *Virtualisation Architect*
  *Pitney Bowes - Tech Central***
  6 Hercules Way, 600 Leavesden Park
  Watford, WD25 7GS
  Phone(+44) (0)1923 279353 | VOIP: 54739353
  Mobile(+44) (0)7775 908612
  bill.doss...@pb.com mailto:bill.doss...@pb.com www.pb.com
  http://www.pb.com/ *In Engineering?**Raise a ticket via Remedy
  Anywhere [HERE
  http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident
  /newIncident.aspx]takes
  less

Re: [ovirt-users] Network Address Change

2014-08-12 Thread Fabian Deutsch


- Original Message -
 Hi All:
 To be honest I do not see any config file in the host node
 /etc/ovirt-node inside, so even I put in the global maintenance mode I
 still don't know how to change the host to the new IP address.

Hey Paul,

if you are using oVirt Node (btw what version are you using?), then there are a 
couple of files, there is
/etc/default/ovirt

and the well known ifcfg files:
/etc/sysconfig/netwprk-scripts/ifcfg-*

And some other paths which are handled by vdsm.

And vdsm is actually managing the network configuration when a Node is 
registered, that means, it can be that any changes to the configuration files 
get overwritten by vdsm again.

Maybe Toni can say something about this.

And I am also not sure if Engine will still recognize a Node, when you change 
the IP of the Node, without letting the Engine know about that.

Sandro, do you know how you can tell Engine that the IP of a Node changed?

Greetings
fabian

 BR,
 Paul.LKW
 
 
 於 11/8/2014 20:56, Sandro Bonazzola 提到:
  Il 08/08/2014 19:07, Paul.LKW ha scritto:
  Hi All:
  I just has a case, I need to change the oVirt host and engine IP address
  due to data center decommission I checked in the hosted-engine host there
  are
  some files I could change ;
 
  in ovirt-hosted-engine/hosted-engine.conf
  ca_subject=O=simple.com, CN=1.2.3.4
  gateway=1.2.3.254
 
  and of course I need to change the ovirtmgmt interface IP too, I think
  just change the above line could do the tick, but where could I change
  the
  other host IP in the cluster ?
  I think I have to be lost all the host as once changed the hosted-engine
  host IP as it is in diff. sub net.
  Does there any command line tools could do that or someone has such
  experience could share?
  Well, I think you can move the hosts to global maintenance, shutdown the
  hosted engine vm, move the first host and the vm to the new network.
  After that you should be able to move the other hosts to the new network.
  When finished you can exit global maintenance.
 
  Never tested such scenario so if any other can provide more info and maybe
  create a wiki page it would be nice.
  Not sure about what happen with the certificates if they've been generated
  using ip address instead of FQDN, probably they won't be valid anymore
  after the network change.
 
 
 
  Best Regards,
  Paul.LKW
  ___
  Users mailing list
  Users@ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users
 
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] el7 node iso for 3.5?

2014-08-11 Thread Fabian Deutsch
- Original Message -
 Are there plans for an el7 based ovirt node iso for ovirt 3.5?

Hey Paul,

yep - we are actually working on el7 support. And the current master should be 
in a not to bad shape.

We still need to see when we switch to provide el7 based Nodes, which is not 
only limited by the code readiness but also by the supporting infrastructure, 
which needs to be migrated to el7.

- fabian

 I see in the announcement for the RC that there is an el6 based node iso.

 It looks like support for el7 as a host is coming along pretty well.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] New oVirt Node ISO for oVirt 3.5 available for testing

2014-08-11 Thread Fabian Deutsch
- Original Message -
 
 On 08/07/2014 02:31 PM, Fabian Deutsch wrote:
  Hey,
 
  there is a new oVirt Node ISO available for testing:
 
  http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140805.0.el6.iso
 
  The low-light is that the ISO contains the important bits for hosted
  engine on Node - but sadly it is affected by a bug, which prevents further
  testing.
 
  In general Node is slowly converging to a more stable state.
 
  Feel free to test and provide us with feedback via the usual channels over
  irc and mailinglists, as well as bugzilla.
 
  Greetings
  fabian
  ___
 
 Thanks! But it is not really working properly:

Hey Jorick!

Thanks for those bugs!
Let us see if we can address them and we give it another shot!

- fabian

 1128116 https://bugzilla.redhat.com/show_bug.cgi?id=1128116 oVirt
 ovirt-nodefdeut...@redhat.com NEW
   dhcp not working on ovirt-node-iso-3.5.0.ovirt35.20140805.0.el6.iso
 https://bugzilla.redhat.com/show_bug.cgi?id=1128116 06:35:26
 1128122 https://bugzilla.redhat.com/show_bug.cgi?id=1128122 oVirt
 ovirt-nodefdeut...@redhat.com NEW
   ntp= kernel command line parameter doesn't work
 https://bugzilla.redhat.com/show_bug.cgi?id=1128122 06:42:49
 1128124 https://bugzilla.redhat.com/show_bug.cgi?id=1128124 oVirt
 ovirt-nodefdeut...@redhat.com NEW
   No virtualization hardware was detected on this system
 https://bugzilla.redhat.com/show_bug.cgi?id=1128124 06:47:00
 1128128 https://bugzilla.redhat.com/show_bug.cgi?id=1128128 oVirt
 ovirt-nodefdeut...@redhat.com NEW
   unable to set root password when networking is not enabled
 https://bugzilla.redhat.com/show_bug.cgi?id=1128128 06:51:55
 
 
 Kind regards,
 
 Jorick Astrego
 Netbulae B.V.
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] New oVirt Node ISO for oVirt 3.5 available for testing

2014-08-07 Thread Fabian Deutsch
Hey,

there is a new oVirt Node ISO available for testing:

http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140805.0.el6.iso

The low-light is that the ISO contains the important bits for hosted engine 
on Node - but sadly it is affected by a bug, which prevents further testing.

In general Node is slowly converging to a more stable state.

Feel free to test and provide us with feedback via the usual channels over irc 
and mailinglists, as well as bugzilla.

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] New member and first question...

2014-08-07 Thread Fabian Deutsch
- Original Message -
 
 
 Am 07.08.2014 15:10, schrieb David BERCOT:
  Ah, great !!! And is there a Debian flavor ?

No. Currently not.
But Node became more stable over the last months, and you might want to try 
this snapshot build:
http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140805.0.el6.iso

  It is my favorite distribution ;-)
 
 Not yet, and I don't know if it is on the roadmap.
 you could maybe create your own, it's basically
 this workflow:
 install $distro
 throw out all unneeded stuff
 install virt stuff (libvirt+vdsm)
 apply hardening (selinux etc)
 create iso
 
 I go with centos minimal and customize
 that myself, works really well.
 
 I don't know if vdsm is already complete
 platform independent (afaik it should be).
 
 the initial development was all on fedora
 and el6, so this is where it runs best atm.
 
 but I know for sure there are plans to
 make it distribution agnostic, but
 I don't know if this includes a pre-created
 iso for ovirt-node based on debian or gentoo.
 
 maybe fabian can shed some light on the
 future plans.

The current Node can really only be created for Fedora related distrios, so 
CentOS, RHEL and Fedora itself.
The reason for this is that all parts the build process is tailored around 
Fedora related tools. Namely kickstarts, and lviecd-tools.

We are currently thinking about how we can change Node and make it more 
friendly, the distro agnostic idea also goes into this thoughts - but there is 
nothing concrete on that front yet.

That's it from the Node side.

- fabian

 alon can maybe give some insight into
 how distribution agnostic ovirt already is
 and what future plans are,
 thus cc'ing them.
 
 --
 Mit freundlichen Grüßen / Regards
 
 Sven Kieske
 
 Systemadministrator
 Mittwald CM Service GmbH  Co. KG
 Königsberger Straße 6
 32339 Espelkamp
 T: +49-5772-293-100
 F: +49-5772-293-333
 https://www.mittwald.de
 Geschäftsführer: Robert Meyer
 St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
 Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt node iso?

2014-08-01 Thread Fabian Deutsch
Hey Jaco,

- Original Message -
 Cheers - I'll look for it  give it a go.
 
 Could I ask if an install-to-host option is available?
 Also that the memtest  image integrity tests are available at boot.

Yep - The installation is the default option.

 I've also noted that there are not corresponding MD5 sums of images
 available on sites, so it's tricky to validate/verify the integrity of
 images downloaded before flashing.

The iso is checking itself when you boot it up. But yes, let me attach the 
md5sums of upcoming ovirt-node-iso builds.

- fabian

 Please advise
 
 Kind regards
 
 - Jaco
 
 On 30/07/14 01:56, Fabian Deutsch wrote:
  Hey Jorick,
 
  I really appreciate that you are looking for a new ISO.
 
  We were actually abotu to release a new ISO, but then we discovered an
  issue with SELinux.
 
  We hope to be able to release a new iso shortly.
 
  Greetings
  fabian
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt node iso?

2014-07-29 Thread Fabian Deutsch
Hey Jorick,

I really appreciate that you are looking for a new ISO.

We were actually abotu to release a new ISO, but then we discovered an issue 
with SELinux.

We hope to be able to release a new iso shortly.

Greetings
fabian

- Original Message -
 Hi,
 
 I wish to test the advanced foreman integration with node deploy again
 but the node iso available is about a month old.
 
 http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140630.el6.iso
 
 Also it didn't work properly on the first test day
 
 Doesn't it need testing or is it so broken that an update can't be
 released at the moment?
 
 Kind regards,
 
 Jorick Astrego
 Netbulae
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Weekly oVirt Engine Appliance builds

2014-07-14 Thread Fabian Deutsch
Hey,

Finally there are weekly Fedora 19 based oVirt Engine Appliance builds.

They can be found in oVirt’s jenkins instance:
http://jenkins.ovirt.org/view/All/job/ovirt-appliance_master_merged/

An ova file is created, this can either be used with Engine or you can extract 
it (it's a compressed tarball) and use it with four favorite virtualization 
solution.

- fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] oVirt Node ISO for 3.5-pre

2014-07-08 Thread Fabian Deutsch
Hey,

here is another draft ISO which is intended to be used for testing with oVirt 
3.5.

This ISO also provides for the first time the oVirt Node Hosted Engine plugin.

http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/ovirt-node-iso-3.5.0.ovirt35.20140707.el6.iso

We've learned from the past: To circumvent some SELinux issues, please append 
enforcing=0 to the kernel commandline on boot. 

And please provide us your feedback, so we can take a look and address the 
problem.

Greetings
fabian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] No configured networking after node image deploy

2014-07-02 Thread Fabian Deutsch
- Original Message -
 Hi,
 
 Using latest node image I'm having a problem with networking after node
 deploy through http://www.ovirt.org/Features/AdvancedForemanIntegration
 http://www.ovirt.org/Features/AdvancedForemanIntegration.

 All network devices are unconfigured and registration of the node fails.
 When I disable-enable dhcp I get an error in the admin gui. supervdsm 
 ovirt-node.log: http://pastebin.com/8bT8aF2x http://pastebin.com/8bT8aF2x

Hey Jorick,

first - thanks for testing.

To debug this, could you please provide the files
/var/log/ovirt-node.log
/var/log/ovirt.log

And - can you register the Node manually?

Thanks
fabian
 
 What caught my attention:
 
 supervdsm.log:
 
 MainThread::INFO::2014-07-02
 09:11:56,256::netconfpersistence::158::root::(_clearDisk) Clearing
 /var/run/vdsm/netconf/nets/ and /var/run/vdsm/netconf/bonds/
 MainThread::DEBUG::2014-07-02
 09:11:56,256::netconfpersistence::166::root::(_clearDisk) No existent
 config to clear.
 MainThread::INFO::2014-07-02
 09:11:56,256::netconfpersistence::182::root::(save) Saved new config
 RunningConfig({}, {}) to /var/run/vdsm/netconf/nets/ and
 /var/run/vdsm/netconf/bonds/
 MainThread::DEBUG::2014-07-02
 09:11:56,258::netconfpersistence::134::root::(_getConfigs) Non-existing
 config set.
 MainThread::DEBUG::2014-07-02 09:11:56,260::utils::683::root::(execCmd)
 '/sbin/ifdown eth0' (cwd None)
 MainThread::DEBUG::2014-07-02 09:11:56,465::utils::703::root::(execCmd)
 SUCCESS: err = ''; rc = 0
 MainThread::ERROR::2014-07-02 09:11:56,466::utils::131::root::(rmFile)
 Removing file: /etc/sysconfig/network-scripts/ifcfg-eth0 failed
 Traceback (most recent call last):
File /usr/lib64/python2.6/site-packages/vdsm/utils.py, line 125, in
 rmFile
  os.unlink(fileToRemove)
 OSError: [Errno 16] Device or resource busy:
 '/etc/sysconfig/network-scripts/ifcfg-eth0'
 sourceRoute::DEBUG::2014-07-02
 09:20:02,310::sourceroutethread::39::root::(process_IN_CLOSE_WRITE_filePath)
 Responding to DHCP response in /var/run/vdsm/sourceRoutes/1404292802
 sourceRoute::DEBUG::2014-07-02
 09:20:02,317::libvirtconnection::146::root::(get) trying to connect libvirt
 sourceRoute::INFO::2014-07-02
 09:20:02,374::sourceroutethread::56::root::(process_IN_CLOSE_WRITE_filePath)
 interface eth0 is not a libvirt interface
 sourceRoute::WARNING::2014-07-02
 09:20:02,374::utils::128::root::(rmFile) File:
 /var/run/vdsm/trackedInterfaces/eth0 already removed
 
 ovirt-node.log:
 
File
 /usr/lib/python2.6/site-packages/ovirt/node/setup/vdsm/engine_page.py,
 line 279, in on_merge
  model.update(cert_path=None)
File
 /usr/lib/python2.6/site-packages/ovirt/node/config/defaults.py, line
 196, in wrapper
File
 /usr/lib/python2.6/site-packages/ovirt/node/setup/vdsm/engine_page.py,
 line 453, in update
  (valid.Empty(or_none=True) | valid.FQDNOrIPAddress())(server)
File /usr/lib/python2.6/site-packages/ovirt/node/valid.py, line 63,
 in __call__
File /usr/lib/python2.6/site-packages/ovirt/node/valid.py, line 69,
 in raise_exception
 InvalidData: u'The field must contain an empty string or a valid FQDN or
 a valid IPv4 address or a valid IPv6 address.'
 
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Installation of ovirt-node-iso rpm on oVirt Engine

2014-06-13 Thread Fabian Deutsch
Am Freitag, den 13.06.2014, 09:08 + schrieb Sven Kieske:
 CC'ing Fabian, who should know the actual image location.
 
 Am 05.06.2014 10:58, schrieb Faltermeier, Florian:
  Hi all,
  
  I'm planning to update/reinstall my ovirt 3.4 hypervisors via the update 
  mechanism that provided in the ovirt-engine.
  I red the documentation about Ovirt Node http://www.ovirt.org/Category:Node
  
  The first topic Upgrading - Through ovirt Engine tells me that I have to 
  install the ovirt-node-iso rpm.
  So where can I find an actual RPM package? I've googled around already but  
  I didn't found any useful hints.

Hey Florian,

currently we don't have this rpm around. But I am optimistic that we
will have one for - at latest - the test day.

Onc eit is available we'll announce it on the users ml as well.

Greetings
fabian

  Thank you!
  
  Regards,
  Florian
 



signature.asc
Description: This is a digitally signed message part
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Persisting glusterfs configs on an oVirt node

2014-05-28 Thread Fabian Deutsch
Am Mittwoch, den 28.05.2014, 14:14 + schrieb Simon Barrett:
 I did a persist /var/lib/glusterd and things are looking better. The 
 gluster config is now still in place after a reboot.
 
 As a workaround to getting glusterd running on boot, I added service 
 glusterd start to /etc/rc.local and ran persist /etc/rc.local. It appears to 
 be working but feels like a bit of a hack.
 
 Does anyone have any other suggestions as to the correct way to do this?

Hey Simon,

I was also investigating both the steps you did. And was also about to
recommend them :) They are more a workaround.

We basically need some patches to change the defaults on Node, to let
gluster work out of the box.

This would include persisting the correct paths and enabling glusterd if
enabled.

- fabian

 Thanks,
 
 Simon
 
 -Original Message-
 From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of 
 Simon Barrett
 Sent: 28 May 2014 14:12
 To: Ryan Barry; Fabian Deutsch; Doron Fediuck
 Cc: users@ovirt.org
 Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt node
 
 Thanks for the replies.
 
 I cannot get glusterd to start on boot and I lose all gluster config every 
 reboot. 
 
 The following shows what I did on the node to start glusterd, create a volume 
 etc, followed by the state of the node after a reboot. 
 
 
 [root@ovirt_node]# service glusterd status glusterd is stopped
 
 [root@ovirt_node]# chkconfig --list glusterd
 glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
 
 [root@ovirt_node]# service glusterd start Starting glusterd:[  OK  ]
 
 gluster volume create vmstore 10.22.8.46:/data/glusterfs/vmstore
 volume create: vmstore: success: please start the volume to access data
 
 gluster vol start vmstore
 volume start: vmstore: success
 
 gluster vol info
 Volume Name: vmstore
 Type: Distribute
 Volume ID: 5bd01043-1352-4014-88ca-e632e264d088
 Status: Started
 Number of Bricks: 1
 Transport-type: tcp
 Bricks:
 Brick1: 10.22.8.46:/data/glusterfs/vmstore
 
 [root@ovirt_node]# ls -1 /var/lib/glusterd/vols/vmstore/ bricks 
 node_state.info trusted-vmstore-fuse.vol cksum  
 rbstate 
 vmstore.10.22.8.46.data-glusterfs-vmstore.vol
 info
 run  
 vmstore-fuse.vol
 
 [root@ovirt_node]# grep gluster /etc/rwtab.d/*
 /etc/rwtab.d/ovirt:files   /var/lib/glusterd
 
 [root@ovirt_node]# chkconfig glusterd on [root@ovirt_node]# chkconfig --list 
 glusterd
 glusterd0:off   1:off   2:on3:on4:on5:on6:off
 
 
 
  I then reboot the node and see the following:
 
 
 [root@ovirt_node]# service glusterd status glusterd is stopped
 
 [root@ovirt_node]# chkconfig --list glusterd
 glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
 
 [root@ovirt_node]# ls -l /var/lib/glusterd/vols/ total 0
 
 No more gluster volume configuration files.
 
 I've taken a look through 
 http://www.ovirt.org/Node_Troubleshooting#Making_changes_last_.2F_Persisting_changes
  but I'm unsure what needs to be done to persist this configuration.
 
 To get glusterd to start on boot, do I need to manually persist /etc/rc* 
 files?
 
 I see files /var/lib/glusterd mentioned in /etc/rwtab.d/ovirt. Is this a 
 list of the files/dirs that should be persisted automatically? If so, is it 
 recursive and should it include everything in /var/lib/glusterd/vols?
 
 
 TIA for any help with this.
 
 Simon
 
 
 
 -Original Message-
 From: Ryan Barry [mailto:rba...@redhat.com]
 Sent: 27 May 2014 14:01
 To: Fabian Deutsch; Doron Fediuck; Simon Barrett
 Cc: users@ovirt.org
 Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt node
 
 On 05/26/2014 04:14 AM, Fabian Deutsch wrote:
  Am Sonntag, den 25.05.2014, 08:18 -0400 schrieb Doron Fediuck:
 
  - Original Message -
  From: Simon Barrett simon.barr...@tradingscreen.com
  To: users@ovirt.org
  Sent: Friday, May 23, 2014 11:29:39 AM
  Subject: [ovirt-users] Persisting glusterfs configs on an oVirt node
 
 
 
  I am working through the setup of oVirt node for a 3.4.1 deployment.
 
 
 
  I setup some glusterfs volumes/bricks on oVirt Node Hypervisor 
  release 3.0.4
  (1.0.201401291204.el6) and created a storage domain. All was working 
  OK until I rebooted the node and found that the glusterfs 
  configuration had not been retained.
 
 
 
  Is there something I should be doing to persist any glusterfs 
  configuration so it survives a node reboot?
 
 
 
  Many thanks,
 
 
 
  Simon
 
 
  Hi Simon,
  it actually sounds like a bug to me, as node are supposed to support 
  gluster.
 
  Ryan / Fabian- thoughts?
 
  Hey,
 
  I vaguely remember that we were seeing a bug like this some time ago.
  We fixed /var/lib/glusterd to be writable (using tmpfs), but it can 
  actually be that we need to persist those contents.
 
  But Simon, can you give details which configuration files are missing 
  and why glusterd is not starting

Re: [ovirt-users] Persisting glusterfs configs on an oVirt node

2014-05-28 Thread Fabian Deutsch
Am Mittwoch, den 28.05.2014, 14:22 + schrieb Simon Barrett:
 I just wasn't sure if I was missing something in the configuration to enable 
 this.
 
 I'll stick with the workarounds I have for now and see how it goes. 

Hey Simon,

it would be great if you could let us know about more issues, which will
help us to improve the situation even more.

Greetings
fabian

 Thanks again.
 
 Simon
 
 -Original Message-
 From: Fabian Deutsch [mailto:fdeut...@redhat.com] 
 Sent: 28 May 2014 15:20
 To: Simon Barrett
 Cc: Ryan Barry; Doron Fediuck; users@ovirt.org
 Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt node
 
 Am Mittwoch, den 28.05.2014, 14:14 + schrieb Simon Barrett:
  I did a persist /var/lib/glusterd and things are looking better. The 
  gluster config is now still in place after a reboot.
  
  As a workaround to getting glusterd running on boot, I added service 
  glusterd start to /etc/rc.local and ran persist /etc/rc.local. It appears 
  to be working but feels like a bit of a hack.
  
  Does anyone have any other suggestions as to the correct way to do this?
 
 Hey Simon,
 
 I was also investigating both the steps you did. And was also about to 
 recommend them :) They are more a workaround.
 
 We basically need some patches to change the defaults on Node, to let gluster 
 work out of the box.
 
 This would include persisting the correct paths and enabling glusterd if 
 enabled.
 
 - fabian
 
  Thanks,
  
  Simon
  
  -Original Message-
  From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On 
  Behalf Of Simon Barrett
  Sent: 28 May 2014 14:12
  To: Ryan Barry; Fabian Deutsch; Doron Fediuck
  Cc: users@ovirt.org
  Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt 
  node
  
  Thanks for the replies.
  
  I cannot get glusterd to start on boot and I lose all gluster config every 
  reboot. 
  
  The following shows what I did on the node to start glusterd, create a 
  volume etc, followed by the state of the node after a reboot. 
  
  
  [root@ovirt_node]# service glusterd status glusterd is stopped
  
  [root@ovirt_node]# chkconfig --list glusterd
  glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
  
  [root@ovirt_node]# service glusterd start Starting glusterd:[  OK  ]
  
  gluster volume create vmstore 10.22.8.46:/data/glusterfs/vmstore
  volume create: vmstore: success: please start the volume to access 
  data
  
  gluster vol start vmstore
  volume start: vmstore: success
  
  gluster vol info
  Volume Name: vmstore
  Type: Distribute
  Volume ID: 5bd01043-1352-4014-88ca-e632e264d088
  Status: Started
  Number of Bricks: 1
  Transport-type: tcp
  Bricks:
  Brick1: 10.22.8.46:/data/glusterfs/vmstore
  
  [root@ovirt_node]# ls -1 /var/lib/glusterd/vols/vmstore/ bricks 
  node_state.info trusted-vmstore-fuse.vol cksum  
  rbstate 
  vmstore.10.22.8.46.data-glusterfs-vmstore.vol
  info
  run  
  vmstore-fuse.vol
  
  [root@ovirt_node]# grep gluster /etc/rwtab.d/*
  /etc/rwtab.d/ovirt:files   /var/lib/glusterd
  
  [root@ovirt_node]# chkconfig glusterd on [root@ovirt_node]# chkconfig 
  --list glusterd
  glusterd0:off   1:off   2:on3:on4:on5:on6:off
  
  
  
   I then reboot the node and see the following:
  
  
  [root@ovirt_node]# service glusterd status glusterd is stopped
  
  [root@ovirt_node]# chkconfig --list glusterd
  glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
  
  [root@ovirt_node]# ls -l /var/lib/glusterd/vols/ total 0
  
  No more gluster volume configuration files.
  
  I've taken a look through 
  http://www.ovirt.org/Node_Troubleshooting#Making_changes_last_.2F_Persisting_changes
   but I'm unsure what needs to be done to persist this configuration.
  
  To get glusterd to start on boot, do I need to manually persist /etc/rc* 
  files?
  
  I see files /var/lib/glusterd mentioned in /etc/rwtab.d/ovirt. Is this a 
  list of the files/dirs that should be persisted automatically? If so, is it 
  recursive and should it include everything in /var/lib/glusterd/vols?
  
  
  TIA for any help with this.
  
  Simon
  
  
  
  -Original Message-
  From: Ryan Barry [mailto:rba...@redhat.com]
  Sent: 27 May 2014 14:01
  To: Fabian Deutsch; Doron Fediuck; Simon Barrett
  Cc: users@ovirt.org
  Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt 
  node
  
  On 05/26/2014 04:14 AM, Fabian Deutsch wrote:
   Am Sonntag, den 25.05.2014, 08:18 -0400 schrieb Doron Fediuck:
  
   - Original Message -
   From: Simon Barrett simon.barr...@tradingscreen.com
   To: users@ovirt.org
   Sent: Friday, May 23, 2014 11:29:39 AM
   Subject: [ovirt-users] Persisting glusterfs configs on an oVirt 
   node
  
  
  
   I am working through the setup of oVirt node for a 3.4.1 deployment.
  
  
  
   I setup some glusterfs volumes/bricks on oVirt Node

Re: [ovirt-users] Persisting glusterfs configs on an oVirt node

2014-05-28 Thread Fabian Deutsch
Am Mittwoch, den 28.05.2014, 14:22 + schrieb Simon Barrett:
 I just wasn't sure if I was missing something in the configuration to enable 
 this.
 
 I'll stick with the workarounds I have for now and see how it goes. 
 
 Thanks again.

You are welcome! :)

 Simon
 
 -Original Message-
 From: Fabian Deutsch [mailto:fdeut...@redhat.com] 
 Sent: 28 May 2014 15:20
 To: Simon Barrett
 Cc: Ryan Barry; Doron Fediuck; users@ovirt.org
 Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt node
 
 Am Mittwoch, den 28.05.2014, 14:14 + schrieb Simon Barrett:
  I did a persist /var/lib/glusterd and things are looking better. The 
  gluster config is now still in place after a reboot.
  
  As a workaround to getting glusterd running on boot, I added service 
  glusterd start to /etc/rc.local and ran persist /etc/rc.local. It appears 
  to be working but feels like a bit of a hack.
  
  Does anyone have any other suggestions as to the correct way to do this?
 
 Hey Simon,
 
 I was also investigating both the steps you did. And was also about to 
 recommend them :) They are more a workaround.
 
 We basically need some patches to change the defaults on Node, to let gluster 
 work out of the box.
 
 This would include persisting the correct paths and enabling glusterd if 
 enabled.
 
 - fabian
 
  Thanks,
  
  Simon
  
  -Original Message-
  From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On 
  Behalf Of Simon Barrett
  Sent: 28 May 2014 14:12
  To: Ryan Barry; Fabian Deutsch; Doron Fediuck
  Cc: users@ovirt.org
  Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt 
  node
  
  Thanks for the replies.
  
  I cannot get glusterd to start on boot and I lose all gluster config every 
  reboot. 
  
  The following shows what I did on the node to start glusterd, create a 
  volume etc, followed by the state of the node after a reboot. 
  
  
  [root@ovirt_node]# service glusterd status glusterd is stopped
  
  [root@ovirt_node]# chkconfig --list glusterd
  glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
  
  [root@ovirt_node]# service glusterd start Starting glusterd:[  OK  ]
  
  gluster volume create vmstore 10.22.8.46:/data/glusterfs/vmstore
  volume create: vmstore: success: please start the volume to access 
  data
  
  gluster vol start vmstore
  volume start: vmstore: success
  
  gluster vol info
  Volume Name: vmstore
  Type: Distribute
  Volume ID: 5bd01043-1352-4014-88ca-e632e264d088
  Status: Started
  Number of Bricks: 1
  Transport-type: tcp
  Bricks:
  Brick1: 10.22.8.46:/data/glusterfs/vmstore
  
  [root@ovirt_node]# ls -1 /var/lib/glusterd/vols/vmstore/ bricks 
  node_state.info trusted-vmstore-fuse.vol cksum  
  rbstate 
  vmstore.10.22.8.46.data-glusterfs-vmstore.vol
  info
  run  
  vmstore-fuse.vol
  
  [root@ovirt_node]# grep gluster /etc/rwtab.d/*
  /etc/rwtab.d/ovirt:files   /var/lib/glusterd
  
  [root@ovirt_node]# chkconfig glusterd on [root@ovirt_node]# chkconfig 
  --list glusterd
  glusterd0:off   1:off   2:on3:on4:on5:on6:off
  
  
  
   I then reboot the node and see the following:
  
  
  [root@ovirt_node]# service glusterd status glusterd is stopped
  
  [root@ovirt_node]# chkconfig --list glusterd
  glusterd0:off   1:off   2:off   3:off   4:off   5:off   6:off
  
  [root@ovirt_node]# ls -l /var/lib/glusterd/vols/ total 0
  
  No more gluster volume configuration files.
  
  I've taken a look through 
  http://www.ovirt.org/Node_Troubleshooting#Making_changes_last_.2F_Persisting_changes
   but I'm unsure what needs to be done to persist this configuration.
  
  To get glusterd to start on boot, do I need to manually persist /etc/rc* 
  files?
  
  I see files /var/lib/glusterd mentioned in /etc/rwtab.d/ovirt. Is this a 
  list of the files/dirs that should be persisted automatically? If so, is it 
  recursive and should it include everything in /var/lib/glusterd/vols?
  
  
  TIA for any help with this.
  
  Simon
  
  
  
  -Original Message-
  From: Ryan Barry [mailto:rba...@redhat.com]
  Sent: 27 May 2014 14:01
  To: Fabian Deutsch; Doron Fediuck; Simon Barrett
  Cc: users@ovirt.org
  Subject: Re: [ovirt-users] Persisting glusterfs configs on an oVirt 
  node
  
  On 05/26/2014 04:14 AM, Fabian Deutsch wrote:
   Am Sonntag, den 25.05.2014, 08:18 -0400 schrieb Doron Fediuck:
  
   - Original Message -
   From: Simon Barrett simon.barr...@tradingscreen.com
   To: users@ovirt.org
   Sent: Friday, May 23, 2014 11:29:39 AM
   Subject: [ovirt-users] Persisting glusterfs configs on an oVirt 
   node
  
  
  
   I am working through the setup of oVirt node for a 3.4.1 deployment.
  
  
  
   I setup some glusterfs volumes/bricks on oVirt Node Hypervisor 
   release 3.0.4
   (1.0.201401291204.el6) and created a storage domain. All was 
   working OK until I rebooted

Re: [ovirt-users] Persisting glusterfs configs on an oVirt node

2014-05-26 Thread Fabian Deutsch
Am Sonntag, den 25.05.2014, 08:18 -0400 schrieb Doron Fediuck:
 
 - Original Message -
  From: Simon Barrett simon.barr...@tradingscreen.com
  To: users@ovirt.org
  Sent: Friday, May 23, 2014 11:29:39 AM
  Subject: [ovirt-users] Persisting glusterfs configs on an oVirt node
  
  
  
  I am working through the setup of oVirt node for a 3.4.1 deployment.
  
  
  
  I setup some glusterfs volumes/bricks on oVirt Node Hypervisor release 3.0.4
  (1.0.201401291204.el6) and created a storage domain. All was working OK
  until I rebooted the node and found that the glusterfs configuration had not
  been retained.
  
  
  
  Is there something I should be doing to persist any glusterfs configuration
  so it survives a node reboot?
  
  
  
  Many thanks,
  
  
  
  Simon
  
 
 Hi Simon,
 it actually sounds like a bug to me, as node are supposed to support
 gluster.
 
 Ryan / Fabian- thoughts?

Hey,

I vaguely remember that we were seeing a bug like this some time ago.
We fixed /var/lib/glusterd to be writable (using tmpfs), but it can
actually be that we need to persist those contents.

But Simon, can you give details which configuration files are missing
and why glusterd is not starting?

Thanks
fabian

 Either way I suggest you take a look in the below link-
 http://www.ovirt.org/Node_Troubleshooting#Making_changes_last_.2F_Persisting_changes
 
 Let s know how it works.
 
 Doron


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Download oVirt Node install on wiki still points to 3.3

2014-04-22 Thread Fabian Deutsch
Am Donnerstag, den 17.04.2014, 10:59 -0400 schrieb Brian Proffitt:
 Fixed it!
 
 Thanks, Jorick, for the catch!

+1

Thanks
fabian


 BKP
 
 - Original Message -
  From: Sandro Bonazzola sbona...@redhat.com
  To: Jorick Astrego j.astr...@netbulae.eu, users users@ovirt.org, 
  Brian Proffitt bprof...@redhat.com,
  Fabian Deutsch fabi...@redhat.com
  Sent: Thursday, April 17, 2014 10:46:35 AM
  Subject: Re: [ovirt-users] Download oVirt Node install on wiki still points 
  to 3.3
  
  Il 17/04/2014 13:53, Jorick Astrego ha scritto:
   I have wiki access but don't know if it's intentional that the oVirt Node
   release link still points to 3.3
   (http://resources.ovirt.org/releases/3.3/iso/)
   
   http://www.ovirt.org/Quick_Start_Guide#Install_Hosts
   
   */Download oVirt Node installation CD/*
   
   /Download the latest version of ovirt Node from oVirt Node release
   http://resources.ovirt.org/releases/3.3/iso/ and burn the ISO image
   onto a disc./
   
  
  No, it's not intentional.
  Feel free to update it for using latest version of oVirt Node:
  http://resources.ovirt.org/releases/stable/iso/
  
  
  
   
   Kind regards,
   
   Jorick Astrego
   Netbulae B.V.
   
   
   ___
   Users mailing list
   Users@ovirt.org
   http://lists.ovirt.org/mailman/listinfo/users
   
  
  
  --
  Sandro Bonazzola
  Better technology. Faster innovation. Powered by community collaboration.
  See how it works at redhat.com
  



signature.asc
Description: This is a digitally signed message part
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] is ovirt-node.iso supposed to create a readonly filesystem?

2014-04-10 Thread Fabian Deutsch
Am Donnerstag, den 10.04.2014, 09:19 +0300 schrieb Itamar Heim:
 On 04/09/2014 11:01 PM, Jeremiah Jahn wrote:
  I'm assuming the answer is no. But for some reason I seem to be
 
 the answer is yes actually. if you want a host you can change, use plain 
 fedora/rhel/centos as the host.
 Fabian can reply to the rest.

Yep. Node has a read-only root filesystem, which has some overlays to
allow limited changes.

  getting LVM volume group UUID overruns.

Do you mean collissions here, or can you explain it a bit more.

  I'm using direct attach fiber
  channel, and everything looks good, but there appears to be some UUID
  or Volume group name in my list of LUNs that matches  some sort of lvm
  key from the node root file system.  This only happens on the node
  that I installed from the iso. I built all of these nodes in a vm,
  then set that image to boot. I did NOT copy that lun from one top the
  others, nor are any of the hosts luns visible from any of the other
  hosts.  Not sure where to start. I'm going to reinstall from a
  bootable cd directly connected to my blade and see if that clears up
  the problem.

Could you please explain abit more about your setup.
If you have a SAN, an all LUNs of it are visible by all hosts, and you
install Node on more than one host, then it could come to collsisions.

Node is using some predefined LV names, e.g. Root, which will cause
collisions if there are more LUNs with LVs which have the same name.

Greetings
fabian



signature.asc
Description: This is a digitally signed message part
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] node spin including qemu-kvm-rhev?

2014-04-07 Thread Fabian Deutsch
Am Sonntag, den 06.04.2014, 11:57 -0400 schrieb Doron Fediuck:
 
 - Original Message -
  From: Paul Jansen vla...@yahoo.com.au
  To: users users@ovirt.org
  Sent: Wednesday, April 2, 2014 11:38:29 AM
  Subject: [Users] node spin including qemu-kvm-rhev?
  
  I understand that there are ongoing discussions with the Centos people
  regarding a suitable home for recompiled qemu-kvm packages.
  Given that the ovirt node is our own spin, is there any reason why that
  couldn't include the recompiled qemu-kvm packages that will then allow us to
  use live snapshots and do live migrations? Itamar recently mentioned that we
  already build these via a jenkins task.
  
  Nodes built on top of a Centos install will still be an issue but I think 
  its
  reasonable that the ovirt-node iso could include these custom packages.
  This way we don't have to potentially wait until 3.4.1 or 3.5 to get the 
  live
  snapshot/migration features. The caveat would be that these features would
  only be supported if the nodes were all ovirt node iso based.
  
  What are people's thoughts?
  
  
 
 Sounds reasonable as long as you understand mix and match will become an 
 issue.
 The questions is how do we differentiate between the nodes to make sure no one
 mixes them by mistake?

Hey,

yeah - that is also my concern.
oVirt node has a mechanism (in master) to expose that features are
present or not, but I don't know if vdsm has the capability to pass this
on to Engine, and if Engine has the logic to detect incompatabilities
based on the underlying qemu-kvm-rhev version.

Greetings
fabian

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [Users] node spin including qemu-kvm-rhev?

2014-04-07 Thread Fabian Deutsch
Am Sonntag, den 06.04.2014, 19:15 -0700 schrieb Paul Jansen:
 My mail client might mangle the bottom-posting here, so we'll see how
 it goes.
 I saw a post from Fabian that he had re-enabled jenkins builds of the
 node image based on Fedora 19/20 (but not yet including the VDSM
 plugin).  Presumably the main goal of this is to ensure that things in
 node land are OK for an upcoming spin based on EL7?

EL7 is one point, but there were users also asking for Fedora based
Nodes and we use Fedora for development, to have stable Nodes (at some
point later) based on CentOS.

 If ovirt does go back to having Fedora and EL based node images in the
 short term it would mean that live migration will work on the Fedora
 images.

The Fedora based images are at least for now available from Jenkins.

 If it was also decided to allow the EL based node image to include the
 recompiled qemu-kvm-rhev package the Ovirt release notes could then
 say that when using an ovirt node image live migration is supported,
 as is when a fedora install has the ovirt hypervisor packages
 installed.

What is this ovirt hypervisor package you mention?

- fabian

 It would only be that an EL based system - built up to then also
 include the ovirt hypervisor packages - that live migration would not
 be supported - at this stage.
 This can change when the details are further worked out with the
 Centos people about how the updated qemu-kvm packages will be hosted
 and made available.
 In the meantime, people that want to set things up so that live
 migration is there can do so.
 
 Once live migration is in place I think it would be interesting to try
 and find out from people interested (or already testing ovirt) that
 have VMware backgrounds/experience what they think is the the largest
 outstanding issue feature wise when comparing ovirt to Vcenter.  What
 would stop them from migrating from vcenter to ovirt?


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


  1   2   3   >