[ovirt-users] Re: CentOS 8 is dead

2020-12-10 Thread Jorick Astrego
Hi,

Personally I don't really see the problem with the CentOS stream switch.
Not trying to start a long discussion but I think it will be even be an
improvement.

Currently we use different combinations of EPEL, SCL, Elrepo etc. just
to get some newer packages and a lot of people do the same and have no
issues with this. oVirt even uses EPEL packages as dependency.

Most of these will become redundant because of stream...

Actually Red Hat has the same strategy for oVirt, it's an upstream for
Red Hat Virtualization. So with the new CentOS strategy you will be one
step ahead on OS and virtualization manager of the paid version.

Testing is always required and with tooling like Katello you can push
the packages after testing to production easily. If you need enterprise
grade stability and support that much, then you should buy it or hire
people to do it in house.

Just my 2c as I see a lot of people getting really worked up about it.

Jorick Astrego

On 12/9/20 2:25 PM, Michal Skrivanek wrote:
>
>> On 9 Dec 2020, at 01:21, thilb...@generalpacific.com wrote:
>>
>> I to would like to see if Ubuntu could become a bit more main stream with 
>> oVirt now that CentOS is gone. I'm sure we won't hear anything until 2021 
>> the oVirt staff need to figure out what to do now.
> Right now we’re happy that CentOS 8.3 is finally here. That aligns 4.4.3 and 
> 4.4.4 again, makes the 4.5 cluster level usable, tons of bug fixes. 
> Afterwards…well, I think Stream is not a bad option, we already have it in 
> some form. I suppose it’s going to be the most feasible option.
> For anything else *someone* would need to do all the work. And I don’t mean 
> it in a way that we - all the people with @redhat.com address - are forbidden 
> to do that or something, it’s really about the sheer amount of work and 
> dedication required, doubling the integration efforts. oVirt is (maybe 
> surprisingly) complex and testing it on any new platform means a lot of extra 
> manpower. 
>
>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/7HHQH2XIHK2VPV4TTERO2NH7DGEYUWV4/
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/JCX24N4UYHZ6HAIE32D2FV4ZT3BAIZYH/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2KYL7E76HKVP2F2JPCCUI6BRUARLAGCT/


[ovirt-users] Re: which cpu type should I chose ??

2020-07-22 Thread Jorick Astrego
Hi,

It appears to be a "Kaby Lake R" processor, what version of ovirt do you
run on what OS?

Did you enable nested virtualization for Virtualbox?

https://www.linuxtechi.com/enable-nested-virtualization-virtualbox-linux/

*By default nested virtualization in Oracle VM VirtualBox on linux
system is disabled.* With the release of VirtualBox 6.1 we can
enable nested virtualization on Intel CPUs starting with 5th
generation Core i.

Regards,
Jorick Astrego

On 7/22/20 2:28 PM, Lucia Jelinkova wrote:
> Hi,
>
> when you go to the Host details, General tab, there is a CPU Type
> field. The info icon should list all CPU types supported by the host.
> Screenshot from 2020-07-22 14-25-36.png
> Hope that helps.
>
> Lucia
>
> On Tue, Jul 21, 2020 at 11:05 AM tommy  <mailto:sz_cui...@163.com>> wrote:
>
> Hi:
>
>  
>
> 1.My server using as ovirt host is built on virtualbox and the cpu
> info is:
>
>  
>
> vendor_id   : GenuineIntel
>
> cpu family  : 6
>
> model   : 142
>
> model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
>
> stepping    : 10
>
> cpu MHz : 1992.002
>
> cache size  : 8192 KB
>
> physical id : 0
>
> siblings    : 3
>
> core id : 2
>
> cpu cores   : 3
>
> apicid  : 2
>
> initial apicid  : 2
>
> fpu : yes
>
> fpu_exception   : yes
>
> cpuid level : 22
>
> wp  : yes
>
> flags   : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx
> rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid
> tsc_known_freq pni pclmulqdq vmx ssse3 cx16 pcid sse4_1 sse4_2
> x2apic movbe popcnt aes xsave avx rdrand hypervisor lahf_lm abm
> 3dnowprefetch invpcid_single pti tpr_shadow flexpriority fsgsbase
> avx2 invpcid rdseed clflushopt md_clear flush_l1d
>
> bugs    : cpu_meltdown spectre_v1 spectre_v2
> spec_store_bypass l1tf mds swapgs itlb_multihit srbds
>
> bogomips    : 3984.00
>
> clflush size    : 64
>
> cache_alignment : 64
>
> address sizes   : 39 bits physical, 48 bits virtual
>
> power management:
>
>  
>
> 2.On the ovirt host page it appears that the host is unusable.The
> log info is: Host ohost3 moved to Non-Operational state as host
> does not meet the cluster's minimum CPU level. Missing CPU
> features : model_IvyBridge, ssbd, spec_ctrl
>
>  
>
> 3.I think the problem is on cluster’s cpu type setting, but which
> one should I chose to fit for the host?
>
>  
>
>  
>
>  
>
>  
>
>  
>
>  
>
> ___
> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
> To unsubscribe send an email to users-le...@ovirt.org
> <mailto:users-le...@ovirt.org>
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MN43IHE7V3YAAT6FWHGTWZJKQOQ4MSL4/
>
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/AGXNYKDTD24KY63FVHCYTS464HGDT3WU/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NIYDK35MQMFHGF7ZKX4EGROIJ6YMPHNI/


[ovirt-users] invalid spf record for ovirt.org

2020-07-22 Thread Jorick Astrego
Hi,

During routine maintenance on our mailserver I noticed the following in
the log:

[22/Jul/2020 14:33:33] Error when parsing SPF TXT record for domain:
ovirt.org, envelope-from=users-boun...@ovirt.org, message: Invalid
character found near "" in "66.187.233.88"

A check on MXtoolbox also gives an invalid systax error:

v=spf1 a:mail.ovirt.org a:gerrit.ovirt.org 66.187.233.88 ~all

Prefix  TypeValue   PrefixDesc  Description Error

v   spf1
The SPF record version  
+   a   mail.ovirt.org  PassMatch if IP has a DNS 'A' record in
given domain.   
+   a   gerrit.ovirt.orgPassMatch if IP has a DNS 'A' 
record in
given domain.   
+   66.187.233.88   
PassUnknown Unknown mechanisms are not allowed
~   all 
SoftFailAlways matches. It goes at the end of your record.  


TestResult  

<https://mxtoolbox.com/problem/spf/spf-syntax-check?page=prob_spf=spf:ovirt.org=1=0=1>
SPF Syntax CheckInvalid syntax found





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/I4MDC4WBOOHE4TYDW4OL5SRGV7S44BIH/


[ovirt-users] Re: Speed Issues

2020-03-27 Thread Jorick Astrego

On 3/24/20 7:25 PM, Alex McWhirter wrote:
> Red hat also recommends a shard size of 512mb, it's actually the only
> shard size they support. Also check the chunk size on the LVM thin
> pools running the bricks, should be at least 2mb. Note that changing
> the shard size only applies to new VM disks after the change. Changing
> the chunk size requires making a new brick.
>
Regarding the chunk size, red hat tells me it depends on RAID or JBOD

https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.5/html/administration_guide/Brick_Configuration

chunksize
An important parameter to be specified while creating a thin
pool is the chunk size,which is the unit of allocation. For good
performance, the chunk size for the thin pool and the parameters
of the underlying hardware RAID storage should be chosen so that
they work well together.

And regarding the shard size, you can fix that with storage live
migration right? Use two volumes and domains and move them so they will
adopt the new shard size...

Am I correct that when you change the sharding on a running volume, it
only applies for new disks? Or does it also apply to extensions to a
current disk?







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UWTZEA54MHSX2AY233DYZZA2KICRPUAM/


[ovirt-users] Re: Speed Issues

2020-03-27 Thread Jorick Astrego

On 3/27/20 11:01 AM, Christian Reiss wrote:
> Hey Strahil,
>
> as always: thanks!
>
> On 24/03/2020 12:23, Strahil Nikolov wrote:
>
>> performance.write-behind-window-size: 64MB (shard  size)
>
> This one doubled my speed from 200mb to 400mb!!
>
> I think this is where the meat is at.
>
> -Chris.

Won't this increase the risk of data loss? We have everything on dual
power feeds etc, so the risk of the having all or 2/3's of the gluster
nodes fail at the same time is very minimal.

But still when that happens? And with a shard size of 512MB this would
be performance.write-behind-window-size: 512MB?

Always tweaking ;-)






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2LCGZG5RP5AYWRYHM3XDFOJY6ZVY7CUL/


[ovirt-users] Re: main channel: failed to connect HTTP proxy connection not allowed

2020-02-21 Thread Jorick Astrego
Duh, too long a day.

I disabled the spice proxy in the console options.

Still doesn't explain why it also fails when using the userportal console.

Regards,

Jorick Astrego


On 2/21/20 4:33 PM, Jorick Astrego wrote:
>
> Hi,
>
> Having a spice console issue on our new 4.3.8 cluster. The console
> stays blank and with the cli and debug on, I get the following error
> "main channel: failed to connect HTTP proxy connection not allowed"
>
> We have a userportal through haproxy so this is configured in ovirt engine
>
> engine-config -g SpiceProxyDefault
> SpiceProxyDefault: http://userportal.*.*:/ version: general
>
> But the same setting works fine on our 4.2 cluster.
>
> I can telnet to the ports on the 4.3.8 hosts without issue.
>
> Non working console on newer cluster:
>
> remote-viewer -v --debug console.vv
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.697: Opening
> display to console.vv
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.700: Guest
> (null) has a spice display
> Guest (null) has a spice display
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.789: Spice
> foreign menu updated
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: After open
> connection callback fd=-1
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.790: Opening
> connection to display at console.vv
> Opening connection to display at console.vv
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: fullscreen
> display 0: 0
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.791: app is not
> in full screen
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.792: New spice
> channel 0x55704bf70d40 SpiceMainChannel 0
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.793: notebook
> show status 0x55704b820280
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: main
> channel: failed to connect HTTP proxy connection not allowed
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: Destroy
> SPICE channel SpiceMainChannel 0
> (remote-viewer:29267): virt-viewer-DEBUG: 16:24:24.969: zap main
> channel
>
> (remote-viewer:29267): virt-viewer-WARNING **: 16:24:24.969:
> Channel error: HTTP proxy connection not allowed
>
> Working console on older cluster:
>
> remote-viewer -v --debug console.vv
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Opening
> display to console.vv
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.111: Guest
> (null) has a spice display
> Guest (null) has a spice display
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Spice
> foreign menu updated
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: After open
> connection callback fd=-1
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.209: Opening
> connection to display at console.vv
> Opening connection to display at console.vv
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: fullscreen
> display 0: 0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.211: app is not
> in full screen
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: New spice
> channel 0x556a03f7e820 SpiceMainChannel 0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.212: notebook
> show status 0x556a03c7a280
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: main
> channel: opened
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.397: notebook
> show status 0x556a03c7a280
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404:
> virt_viewer_app_set_uuid_string: UUID changed to
> a2d64ffe-7583-45b6-92f3-87661039388c
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.404: app is not
> in full screen
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.502: app is not
> in full screen
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice
> channel 0x556a043bb660 SpiceDisplayChannel 0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.514: New spice
> channel 0x556a0422b570 SpiceCursorChannel 0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: New spice
> channel 0x556a0422c000 SpiceInputsChannel 0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.515: new inputs
> channel
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: creating
> spice display (#:0)
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.661: Insert
> display 0 0x556a03ca29e0
> (remote-viewer:29334): virt-viewer-DEBUG: 16:25:59.699: creating
> spice display (#:1)
> (remote

[ovirt-users] main channel: failed to connect HTTP proxy connection not allowed

2020-02-21 Thread Jorick Astrego
ewer:29334): virt-viewer-DEBUG: 16:26:00.074: Allocated
1024x768
(remote-viewer:29334): virt-viewer-DEBUG: 16:26:00.074: Child
allocate 1024x768
(remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Allocated
1024x768
(remote-viewer:29334): virt-viewer-DEBUG: 16:26:04.846: Child
allocate 1024x768






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WSIYJ5WQC75F4VHVE46DS6YOWCTCMQ7D/


[ovirt-users] Re: oVirt & Zabbix agent

2020-02-16 Thread Jorick Astrego
Hi,

We've been running zabbix for years without issues.

I also really don't know what issues it could cause, it's just an agent
using little resources connecting to a specific port that isn't used by
any other program.

Haven't heard any issues with it running on any host for many years .

Regards,

Jorick

On 2/14/20 7:46 PM, Diggy Mc wrote:
> Are there any known issues with running the Zabbix agent on either the Hosted 
> Engine (4.3.8) or oVirt Nodes (4.3.8) ???  I'd like to install the agent 
> while not crashing my hosting environment.
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/DR3LNJFP2KV53DMXESZCI4MIFR3ZCNUQ/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/QD6N7C2X7QLHRUFDRLY6ZTYPAP4A5ZA3/


[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-10 Thread Jorick Astrego

On 2/10/20 1:27 PM, Jorick Astrego wrote:
>
> Hmm, I didn't notice that.
>
> I did a check on the NFS server and I found the
> "1ed0a635-67ee-4255-aad9-b70822350706" in the exportdom path
> (/data/exportdom).
>
> This was an old NFS export domain that has been deleted for a while
> now. I remember finding somewhere an issue with old domains still
> being active after removal but I cannot find it now.
>
> I unexported the directory on the nfs server and now I have to correct
> mount and it activates fine.
>
> Thanks!
>
Still weird that it picks another nfs mount path to mount that has been
removed months ago from engine.

It's not listed in the database on engine:

engine=# select * from storage_domain_static ;
  id  |  
storage    |  storage_name  |
storage_domain_type | storage_type | storage_domain_format_type
| _create_date  | _update_date  | reco
verable | last_time_used_as_master |   
storage_description | storage_comment | wipe_after_delete |
warning_low_space_indicator | critical_space_action_blocker |
first_metadata_device | vg_metadata_device | discard_after_delet
e | backup | warning_low_confirmed_space_indicator | block_size

--+--++-+--++---+---+-

+--++-+---+-+---+---++
--++---+
 782a61af-a520-44c4-8845-74bf92888552 |
640ab34d-aa5d-478b-97be-e3f810558628 | ISO_DOMAIN
|   2 |    1 | 0  |
2017-11-16 09:49:49.225478+01 |   | t  
    |    0 |
ISO_DOMAIN | |
f |
|   |  
|    | f 
  | f  |   |    512
 072fbaa1-08f3-4a40-9f34-a5ca22dd1d74 |
ceab03af-7220-4d42-8f5c-9b557f5d29af | ovirt-image-repository
|   4 |    8 | 0  |
2016-10-14 20:40:44.700381+02 | 2018-04-06 14:03:31.201898+02 | t  
    |    0 | Public Glance repository for
oVirt | | f
| |  
|   |    | f 
  | f  |   |    512
 b30bab9d-9a66-44ce-ad17-2eb4ee858d8f |
40d191b0-b7f8-48f9-bf6f-327275f51fef | ssd-6 
|   1 |    7 | 4  |
2017-06-25 12:45:24.52974+02  | 2019-01-24 15:35:57.013832+01 | t  
    |    1498461838176
|    | |
f |  10
| 5 |  
|    | f 
  | f  |   |    512
 95b4e5d2-2974-4d5f-91e4-351f75a15435 |
f11fed97-513a-4a10-b85c-2afe68f42608 | ssd-3 
|   1 |    7 | 4  |
2019-01-10 12:15:55.20347+01  | 2019-01-24 15:35:57.013832+01 | t  
    |    0
|    | |
f |  10
| 5 |  
|    | f 
  | f  |    10 |    512
 f5d2f7c6-093f-46d6-a844-224d92db5ef9 |
b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs 
|   1 |    1 | 4  |
2018-01-19 13:31:25.899738+01 | 2019-02-14 14:36:22.3171+01   | t  
    |    1530772724454
|    | |
f |  10
| 5 |  
|    | f 
  | f  | 0 |    512
 33f1ba00-6a16-4e58-b4c5-94426f1c4482 |
6b6b7899-c82b-4417-b453-0b3b0ac11deb | ssd-4 
|   1 |    7 | 4  

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-10 Thread Jorick Astrego

On 2/10/20 11:09 AM, Amit Bawer wrote:
> compared it with host having nfs domain working
> this
>
> On Mon, Feb 10, 2020 at 11:11 AM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
>
> On 2/9/20 10:27 AM, Amit Bawer wrote:
>>
>>
>>     On Thu, Feb 6, 2020 at 11:07 AM Jorick Astrego
>> mailto:jor...@netbulae.eu>> wrote:
>>
>> Hi,
>>
>> Something weird is going on with our ovirt node 4.3.8 install
>> mounting a nfs share.
>>
>> We have a NFS domain for a couple of backup disks and we have
>> a couple of 4.2 nodes connected to it.
>>
>> Now I'm adding a fresh cluster of 4.3.8 nodes and the
>> backupnfs mount doesn't work.
>>
>> (annoying you cannot copy the text from the events view)
>>
>> The domain is up and working
>>
>> ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9
>> Size:10238 GiB
>> Available:2491 GiB
>> Used:7747 GiB
>> Allocated:3302 GiB
>> Over Allocation Ratio:37%
>> Images:7
>> Path:*.*.*.*:/data/ovirt
>> NFS Version:AUTO
>> Warning Low Space Indicator:10% (1023 GiB)
>> Critical Space Action Blocker:5 GiB
>>
>> But somehow the node appears to thin thinks it's an LVM
>> volume? It tries to find the VGs volume group but fails...
>> which is not so strange as it is an NFS volume:
>>
>> 2020-02-05 14:17:54,190+ WARN  (monitor/f5d2f7c)
>> [storage.LVM] Reloading VGs failed
>> (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] rc=5
>> out=[] err=['  Volume group
>> "f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', ' 
>> Cannot process volume group
>> f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470)
>> 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c)
>> [storage.Monitor] Setting up monitor for
>> f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330)
>> Traceback (most recent call last):
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
>> line 327, in _setupLoop
>>     self._setupMonitor()
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
>> line 349, in _setupMonitor
>>     self._produceDomain()
>>   File "/usr/lib/python2.7/site-packages/vdsm/utils.py",
>> line 159, in wrapper
>>     value = meth(self, *a, **kw)
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
>> line 367, in _produceDomain
>>     self.domain = sdCache.produce(self.sdUUID)
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
>> line 110, in produce
>>     domain.getRealDomain()
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
>> line 51, in getRealDomain
>>     return self._cache._realProduce(self._sdUUID)
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
>> line 134, in _realProduce
>>     domain = self._findDomain(sdUUID)
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
>> line 151, in _findDomain
>>     return findMethod(sdUUID)
>>   File
>> "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
>> line 176, in _findUnfetchedDomain
>>     raise se.StorageDomainDoesNotExist(sdUUID)
>> StorageDomainDoesNotExist: Storage domain does not exist:
>> (u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',)
>>
>> The volume is actually mounted fine on the node:
>>
>> On NFS server
>>
>> Feb  5 15:47:09 back1en rpc.mountd[4899]: authenticated
>> mount request from *.*.*.*:673 for /data/ovirt (/data/ovirt)
>>
>> On the host
>>
>> mount|grep nfs
>>
>> *.*.*.*:/data/ovirt on
>> /rhev/data-center/mnt/*.*.

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-10 Thread Jorick Astrego

On 2/9/20 10:27 AM, Amit Bawer wrote:
>
>
> On Thu, Feb 6, 2020 at 11:07 AM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
> Hi,
>
> Something weird is going on with our ovirt node 4.3.8 install
> mounting a nfs share.
>
> We have a NFS domain for a couple of backup disks and we have a
> couple of 4.2 nodes connected to it.
>
> Now I'm adding a fresh cluster of 4.3.8 nodes and the backupnfs
> mount doesn't work.
>
> (annoying you cannot copy the text from the events view)
>
> The domain is up and working
>
> ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9
> Size:10238 GiB
> Available:2491 GiB
> Used:7747 GiB
> Allocated:3302 GiB
> Over Allocation Ratio:37%
> Images:7
> Path:*.*.*.*:/data/ovirt
> NFS Version:AUTO
> Warning Low Space Indicator:10% (1023 GiB)
> Critical Space Action Blocker:5 GiB
>
> But somehow the node appears to thin thinks it's an LVM volume? It
> tries to find the VGs volume group but fails... which is not so
> strange as it is an NFS volume:
>
> 2020-02-05 14:17:54,190+ WARN  (monitor/f5d2f7c)
> [storage.LVM] Reloading VGs failed
> (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9'] rc=5 out=[]
> err=['  Volume group "f5d2f7c6-093f-46d6-a844-224d92db5ef9"
> not found', '  Cannot process volume group
> f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470)
> 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c)
> [storage.Monitor] Setting up monitor for
> f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330)
> Traceback (most recent call last):
>   File
> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
> line 327, in _setupLoop
>     self._setupMonitor()
>   File
> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
> line 349, in _setupMonitor
>     self._produceDomain()
>   File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line
> 159, in wrapper
>     value = meth(self, *a, **kw)
>   File
> "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
> line 367, in _produceDomain
>     self.domain = sdCache.produce(self.sdUUID)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
> line 110, in produce
>     domain.getRealDomain()
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
> line 51, in getRealDomain
>     return self._cache._realProduce(self._sdUUID)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
> line 134, in _realProduce
>     domain = self._findDomain(sdUUID)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
> line 151, in _findDomain
>     return findMethod(sdUUID)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py",
> line 176, in _findUnfetchedDomain
>     raise se.StorageDomainDoesNotExist(sdUUID)
> StorageDomainDoesNotExist: Storage domain does not exist:
> (u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',)
>
> The volume is actually mounted fine on the node:
>
> On NFS server
>
> Feb  5 15:47:09 back1en rpc.mountd[4899]: authenticated mount
> request from *.*.*.*:673 for /data/ovirt (/data/ovirt)
>
> On the host
>
> mount|grep nfs
>
> *.*.*.*:/data/ovirt on
> /rhev/data-center/mnt/*.*.*.*:_data_ovirt type nfs
> 
> (rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=*.*.*.*,mountvers=3,mountport=20048,mountproto=udp,local_lock=all,addr=*.*.*.*)
>
> And I can see the files:
>
> ls -alrt /rhev/data-center/mnt/*.*.*.*:_data_ovirt
> total 4
> drwxr-xr-x. 5 vdsm kvm    61 Oct 26  2016
> 1ed0a635-67ee-4255-aad9-b70822350706
>
>
> What ls -lart for 1ed0a635-67ee-4255-aad9-b70822350706 is showing?

ls -arlt 1ed0a635-67ee-4255-aad9-b70822350706/
total 4
drwxr-xr-x. 2 vdsm kvm    93 Oct 26  2016 dom_md
drwxr-xr-x. 5 vdsm kvm    61 Oct 26  2016 .
drwxr-xr-x. 4 vdsm kvm    40 Oct 26  2016 master
drwxr-xr-x. 5 vdsm kvm  4096 Oct 26  2016 images
drwxrwxrwx. 3 root root   86 Feb  5 14:37 ..

Regards,

Jorick Astrego





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



   

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-08 Thread Jorick Astrego
Dear Amit.

That is not exactly the issue we're facing; I have two clusters an old
4.2 cluster and a fresh 4.3 cluster. The DC is set to 4.2 because of this.

I wish to bring the 4.3 cluster online and migrate everything to it,
then remove the 4.2 cluster.

This should be a path that can be taken imho.

Otherwise I could upgrade the current 4.2 cluster althought it gets
decomissioned but then I have the same problem with hosts upgraded to
4.3 not being able to connect to the NFS and able to be activated. Until
I upgrade them all and set the cluster and DC to 4.3.

I could detach the NFS domain for a bit, but we use this mount for
backup disks of several VM's and I'd rather not migrate everything in a
hurry or do without these backups for a longer time.

Regards,

Jorick Astrego

On 2/8/20 11:51 AM, Amit Bawer wrote:
>  I doubt if you can use 4.3.8 nodes with a 4.2 cluster without
> upgrading it first. But myabe members of this list could say differently.
>
> On Friday, February 7, 2020, Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
>
> On 2/6/20 6:22 PM, Amit Bawer wrote:
>>
>>
>>     On Thu, Feb 6, 2020 at 2:54 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote:
>>
>>
>> On 2/6/20 1:44 PM, Amit Bawer wrote:
>>>
>>>
>>> On Thu, Feb 6, 2020 at 1:07 PM Jorick Astrego
>>> mailto:jor...@netbulae.eu>> wrote:
>>>
>>> Here you go, this is from the activation I just did a
>>> couple of minutes ago.
>>>
>>> I was hoping to see how it was first connected to host, but
>>> it doesn't go that far back. Anyway, the storage domain type
>>> is set from engine and vdsm never try to guess it as far as
>>> I saw.
>>
>> I put the host in maintenance and activated it again, this
>> should give you some more info. See attached log.
>>
>>> Could you query the engine db about the misbehaving domain
>>> and paste the results?
>>>
>>> # su - postgres
>>> Last login: Thu Feb  6 07:17:52 EST 2020 on pts/0
>>> -bash-4.2$
>>> LD_LIBRARY_PATH=/opt/rh/rh-postgresql10/root/lib64/  
>>> /opt/rh/rh-postgresql10/root/usr/bin/psql engine
>>> psql (10.6)
>>> Type "help" for help.
>>> engine=# select * from storage_domain_static where id =
>>> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ;
>>
>>
>> engine=# select * from storage_domain_static where id =
>> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ;
>>   id  |  
>> storage    | storage_name |
>> storage_domain_type | storage_type |
>> storage_domain_format_type |
>> _create_date  |    _update_date |
>> recoverable | la
>> st_time_used_as_master | storage_description |
>> storage_comment | wipe_after_delete |
>> warning_low_space_indicator |
>> critical_space_action_blocker | first_metadata_device |
>> vg_metadata_device | discard_after_delete | backup |
>> warning_low_co
>> nfirmed_space_indicator | block_size
>> 
>> --+--+--+-+--++---+-+-+---
>> 
>> ---+-+-+---+-+---+---++--++---
>> +
>>  f5d2f7c6-093f-46d6-a844-224d92db5ef9 |
>> b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs   
>> |   1 |    1 |
>> 4  | 2018-01-19
>> 13:31:25.899738+01 | 2019-02-14 14:36:22.3171+01 |
>> t   |  
>>  1530772724454 |
>> | | f
>> |  10
>> | 5 |  
>> |    | f    | f 
>> |  
&g

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-07 Thread Jorick Astrego

On 2/6/20 6:22 PM, Amit Bawer wrote:
>
>
> On Thu, Feb 6, 2020 at 2:54 PM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
>
> On 2/6/20 1:44 PM, Amit Bawer wrote:
>>
>>
>> On Thu, Feb 6, 2020 at 1:07 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote:
>>
>> Here you go, this is from the activation I just did a couple
>> of minutes ago.
>>
>> I was hoping to see how it was first connected to host, but it
>> doesn't go that far back. Anyway, the storage domain type is set
>> from engine and vdsm never try to guess it as far as I saw.
>
> I put the host in maintenance and activated it again, this should
> give you some more info. See attached log.
>
>> Could you query the engine db about the misbehaving domain and
>> paste the results?
>>
>> # su - postgres
>> Last login: Thu Feb  6 07:17:52 EST 2020 on pts/0
>> -bash-4.2$ LD_LIBRARY_PATH=/opt/rh/rh-postgresql10/root/lib64/  
>> /opt/rh/rh-postgresql10/root/usr/bin/psql engine
>> psql (10.6)
>> Type "help" for help.
>> engine=# select * from storage_domain_static where id =
>> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ;
>
>
> engine=# select * from storage_domain_static where id =
> 'f5d2f7c6-093f-46d6-a844-224d92db5ef9' ;
>   id  |  
> storage    | storage_name | storage_domain_type |
> storage_type | storage_domain_format_type |
> _create_date  |    _update_date |
> recoverable | la
> st_time_used_as_master | storage_description | storage_comment
> | wipe_after_delete | warning_low_space_indicator |
> critical_space_action_blocker | first_metadata_device |
> vg_metadata_device | discard_after_delete | backup |
> warning_low_co
> nfirmed_space_indicator | block_size
> 
> --+--+--+-+--++---+-+-+---
> 
> ---+-+-+---+-+---+---++--++---
> +
>  f5d2f7c6-093f-46d6-a844-224d92db5ef9 |
> b8b456f0-27c3-49b9-b5e9-9fa81fb3cdaa | backupnfs   
> |   1 |    1 |
> 4  | 2018-01-19 13:31:25.899738+01 |
> 2019-02-14 14:36:22.3171+01 | t   |  
>  1530772724454 | |
> | f |  10
> | 5 |  
> |    | f    | f 
> |  
>   0 |    512
> (1 row)
>
>
>
> Thanks for sharing,
>
> The storage_type in db is indeed NFS (1), storage_domain_format_type
> is 4 - for ovirt 4.3 the storage_domain_format_type is 5 by default
> and usually datacenter upgrade is required for 4.2 to 4.3 migration,
> which not sure if possible in your current setup since you have 4.2
> nodes using this storage as well.
>
> Regarding the repeating monitor failure for the SD:
>
> 2020-02-05 14:17:54,190+ WARN  (monitor/f5d2f7c) [storage.LVM]
> Reloading VGs failed (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9']
> rc=5 out=[] err=['  Volume group
> "f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', '  Cannot process
> volume group f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470)
>
> This error means that the monitor has tried to query the SD as a VG
> first and failed, this is expected for the fallback code called for
> finding a domain missing from SD cache:
>
> def_findUnfetchedDomain(self, sdUUID):
> ...
> formod in(blockSD, glusterSD, localFsSD, nfsSD):
> try:
> returnmod.findDomain(sdUUID)
> exceptse.StorageDomainDoesNotExist:
> pass
> exceptException:
> self.log.error(
> "Error while looking for domain `%s`",
> sdUUID, exc_info=True)
> raisese.StorageDomainDoesNotExist(sdUUID)
>
> 2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c) [storage.Monitor]
> Setting up monitor for f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed
> (monitor:330)
> Traceback (most recent call last):
>   File "/us

[ovirt-users] Re: issue connecting 4.3.8 node to nfs domain

2020-02-06 Thread Jorick Astrego

On 2/6/20 12:08 PM, Gianluca Cecchi wrote:
> On Thu, Feb 6, 2020 at 10:07 AM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
> Hi,
>
> [snip] 
>
> (annoying you cannot copy the text from the events view)
>
>
>
> I don't know if I understood correctly your concern, but in my case if
> I go in Hosts --> Events 
> and double click on a line I have a pop-up window named "Event
> Details" where I can copy  and paste "ID" "Time" and "Message" fields'
> values.
> Not so friendly but it works
>
> I don't know if from the Rest API you can also filter the kind of
> events to display, but at least you can do something like:
>
> curl -X GET -H "Accept: application/xml" -u $(cat ident_file )
> --cacert /etc/pki/ovirt-engine/ca.pem
> https://engine_fqdn:443/ovirt-engine/api/events | grep description
>
>
> HIH,
> Gianluca

Hi Gianluca,

Thanks, it's a bit counter intuitive but that works!

Regards,

Jorick





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PARQXHWTUNOCA6RFWCMB3NIZZ4XKHX2Y/


[ovirt-users] issue connecting 4.3.8 node to nfs domain

2020-02-06 Thread Jorick Astrego
Hi,

Something weird is going on with our ovirt node 4.3.8 install mounting a
nfs share.

We have a NFS domain for a couple of backup disks and we have a couple
of 4.2 nodes connected to it.

Now I'm adding a fresh cluster of 4.3.8 nodes and the backupnfs mount
doesn't work.

(annoying you cannot copy the text from the events view)

The domain is up and working

ID:f5d2f7c6-093f-46d6-a844-224d92db5ef9
Size:10238 GiB
Available:2491 GiB
Used:7747 GiB
Allocated:3302 GiB
Over Allocation Ratio:37%
Images:7
Path:*.*.*.*:/data/ovirt
NFS Version:AUTO
Warning Low Space Indicator:10% (1023 GiB)
Critical Space Action Blocker:5 GiB

But somehow the node appears to thin thinks it's an LVM volume? It tries
to find the VGs volume group but fails... which is not so strange as it
is an NFS volume:

2020-02-05 14:17:54,190+ WARN  (monitor/f5d2f7c) [storage.LVM]
Reloading VGs failed (vgs=[u'f5d2f7c6-093f-46d6-a844-224d92db5ef9']
rc=5 out=[] err=['  Volume group
"f5d2f7c6-093f-46d6-a844-224d92db5ef9" not found', '  Cannot process
volume group f5d2f7c6-093f-46d6-a844-224d92db5ef9']) (lvm:470)
2020-02-05 14:17:54,201+ ERROR (monitor/f5d2f7c)
[storage.Monitor] Setting up monitor for
f5d2f7c6-093f-46d6-a844-224d92db5ef9 failed (monitor:330)
Traceback (most recent call last):
  File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
line 327, in _setupLoop
    self._setupMonitor()
  File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
line 349, in _setupMonitor
    self._produceDomain()
  File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 159,
in wrapper
    value = meth(self, *a, **kw)
  File "/usr/lib/python2.7/site-packages/vdsm/storage/monitor.py",
line 367, in _produceDomain
    self.domain = sdCache.produce(self.sdUUID)
  File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line
110, in produce
    domain.getRealDomain()
  File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line
51, in getRealDomain
    return self._cache._realProduce(self._sdUUID)
  File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line
134, in _realProduce
    domain = self._findDomain(sdUUID)
  File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line
151, in _findDomain
    return findMethod(sdUUID)
  File "/usr/lib/python2.7/site-packages/vdsm/storage/sdc.py", line
176, in _findUnfetchedDomain
    raise se.StorageDomainDoesNotExist(sdUUID)
StorageDomainDoesNotExist: Storage domain does not exist:
(u'f5d2f7c6-093f-46d6-a844-224d92db5ef9',)

The volume is actually mounted fine on the node:

On NFS server

Feb  5 15:47:09 back1en rpc.mountd[4899]: authenticated mount
request from *.*.*.*:673 for /data/ovirt (/data/ovirt)

On the host

mount|grep nfs

*.*.*.*:/data/ovirt on /rhev/data-center/mnt/*.*.*.*:_data_ovirt
type nfs

(rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,soft,nolock,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,mountaddr=*.*.*.*,mountvers=3,mountport=20048,mountproto=udp,local_lock=all,addr=*.*.*.*)

And I can see the files:

ls -alrt /rhev/data-center/mnt/*.*.*.*:_data_ovirt
total 4
drwxr-xr-x. 5 vdsm kvm    61 Oct 26  2016
1ed0a635-67ee-4255-aad9-b70822350706
-rwxr-xr-x. 1 vdsm kvm 0 Feb  5 14:37 __DIRECT_IO_TEST__
drwxrwxrwx. 3 root root   86 Feb  5 14:37 .
drwxr-xr-x. 5 vdsm kvm  4096 Feb  5 14:37 ..





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/IFTO5WBLVLGTVWKYN3BGLOHAC453UBD5/


[ovirt-users] Re: SPM contending loop

2020-01-14 Thread Jorick Astrego
Hi Jayme,

The only thing I can find related to the vdsm errors you post is
https://bugzilla.redhat.com/show_bug.cgi?id=1493184

Nir states it's just a logging issue so that doesn't help to much.

What version are you running?

Anything in the gluster logs on the node?


 Nir Soffer 2018-06-25 12:27:16 UTC

These exceptions:

OSError: [Errno 2] No such file or directory
...
TaskMetaDataLoadError: Can't load Task Metadata: 
('/rhev/data-center/e6c5d8a2-5386-11e8-8885-004655214801/mastersd/master/tasks/60bf8af9-d4d3-4753-a40d-2a8d028d3d3c/60bf8af9-d4d3-4753-a40d-2a8d028d3d3c.recover.0',)

Mean that a dumped task could not not loaded because there was no such file 
in the
task directory.

This error does not effect the SPM start process, the code is trying to 
load dumped
tasks and ignore the result of the load.

So this looks like log issue, moving severity to low since I don't see any 
real
issue.

Regarding the exceptions, we have several issues:

1. Logging several exceptions for the same problem - we should log the same 
issue
   exactly once. This happens because the code using the anti-pattern of 
logging
   an exception and raising new one.

2. I'm not sure why we log a traceback for expected error like a missing 
dumped
   task file. This should be logged without a traceback.

3. I'm not sure why missing dumped task is an error, since the SPM code 
ignore
   it. This should be probably a warning.

Regards,

Jorick Astrego

Netbulae

On 1/14/20 3:27 AM, Jayme wrote:
> My cluster appears to be experiencing an SPM problem. I recently
> placed each host in maintenance to move the ovirt management network
> to another interface.  All was successful and all VMs are currently
> running.  However, I'm not facing an SPM contending loop with data
> center going in and out of responsive status. 
>
> I have a 3 server HCI setup and all volumes are active and healed,
> there are no unsynced entries or split brains.
>
> Does anyone know how I could diagnose the SPM issue?
>
> engine.log:
>
> 2020-01-13 22:24:54,777-04 INFO
>  [org.ovirt.engine.core.vdsbroker.gluster.GlusterTasksListVDSCommand]
> (DefaultQuartzScheduler2) [213adf4f] START,
> GlusterTasksListVDSCommand(HostName = Orchard0,
> VdsIdVDSCommandParametersBase:{hostId='771c67eb-56e6-4736-8c67-668502d4ecf5'}),
> log id: 349f80a9
> 2020-01-13 22:24:55,231-04 INFO
>  [org.ovirt.engine.core.vdsbroker.gluster.GlusterTasksListVDSCommand]
> (DefaultQuartzScheduler2) [213adf4f] FINISH,
> GlusterTasksListVDSCommand, return: [], log id: 349f80a9
> 2020-01-13 22:24:58,245-04 INFO
>  [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> (DefaultQuartzScheduler3) [4f66c75b] START,
> GlusterServersListVDSCommand(HostName = Orchard0,
> VdsIdVDSCommandParametersBase:{hostId='771c67eb-56e6-4736-8c67-668502d4ecf5'}),
> log id: 7b04f110
> 2020-01-13 22:24:58,887-04 INFO
>  [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] Command
> 'org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand'
> return value '
> TaskStatusListReturn:{status='Status [code=654, message=Not SPM]'}
> '
> 2020-01-13 22:24:58,888-04 INFO
>  [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] HostName = Orchard1
> 2020-01-13 22:24:58,888-04 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetAllTasksStatusesVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] Command
> 'HSMGetAllTasksStatusesVDSCommand(HostName = Orchard1,
> VdsIdVDSCommandParametersBase:{hostId='fb1e62d5-1dc1-4ccc-8b2b-cf48f7077d0d'})'
> execution failed: IRSGenericException: IRSErrorException:
> IRSNonOperationalException: Not SPM
> 2020-01-13 22:24:59,034-04 INFO
>  [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> (DefaultQuartzScheduler3) [4f66c75b] FINISH,
> GlusterServersListVDSCommand, return: [10.12.0.220/24:CONNECTED
> <http://10.12.0.220/24:CONNECTED>,
> orchard1.grove.silverorange.com:CONNECTED,
> orchard2.grove.silverorange.com:DISCONNECTED], log id: 7b04f110
> 2020-01-13 22:24:59,049-04 INFO
>  [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> (DefaultQuartzScheduler3) [4f66c75b] START,
> GlusterServersListVDSCommand(HostName = Orchard2,
> VdsIdVDSCommandParametersBase:{hostId='fd0752d8-2d41-45b0-887a-0ffacbb8a237'}),
> log id: 43f1dd82
> 2020-01-13 22:24:59,099-04 INFO
>  [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStoragePoolVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-72) [] START,
> ConnectStoragePoolVDSCommand(HostName = Orchard1,
> ConnectStoragePoolVDSC

[ovirt-users] Re: [ANN] oVirt 4.3.8 Third Release Candidate is now available for testing

2020-01-14 Thread Jorick Astrego

On 1/14/20 9:59 AM, Gianluca Cecchi wrote:
> On Tue, Jan 14, 2020 at 8:57 AM Sandro Bonazzola  <mailto:sbona...@redhat.com>> wrote:
>
>
>
> Il giorno lun 13 gen 2020 alle ore 15:17 Gianluca Cecchi
> mailto:gianluca.cec...@gmail.com>> ha
> scritto:
>
> On Wed, Jan 8, 2020 at 5:48 PM Lev Veyde  <mailto:lve...@redhat.com>> wrote:
>
> The oVirt Project is pleased to announce the availability
> of the oVirt 4.3.8 Third Release Candidate for testing, as
> of January 8th, 2020.
>
>
> Hello,
> any confirmation if what described here:
> https://bugzilla.redhat.com/show_bug.cgi?id=1768776
> has been merged for being tested in 4.3.8 3rd RC?
>
>
> on oVirt side, code is in since 4.3.7
>
>
> Ok, thanks.
>
>  
>
> In case with which version of OKD?
>
>
> We are working for getting official inclusion in OKD 4.4
>  
>
>
> Just for clarification, as it is not so clear to me OCP 4.x <--> OKD
> 4.y mapping, even after publishing the OKD roadmap (without any
> date... what kind of roadmap is that?) here:
> https://github.com/openshift/community/blob/master/ROADMAP.md
>
> Are you referring to the commercial OCP here? Because OKD 4.4 doesn't
> sound as something defined yet...
> Or anything consumable in OKD4 Preview right now?
>
> Gianluca
>
It sure looks like something not defined yet:

https://github.com/openshift/community/issues/51


  *dmueller2001 <https://github.com/dmueller2001> * commented on
  Oct 11, 2019
  <https://github.com/openshift/community/issues/51#issue-505952024>


Christian Glombek to present update on OKD Road Map CfA
*Oct 15 2020* OKD WG Meeting


Regards,

Jorick Astrego

>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/EN63R4BBTX3XTYXKQILA75HNDVVXKJCB/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/BGOLYJDN2JE2FY44JJF75VQ7X2OKAB7Z/


[ovirt-users] Re: oVirt Open Source Backup solution?

2019-05-16 Thread Jorick Astrego

On 5/16/19 4:12 PM, Derek Atkins wrote:
> Jorick Astrego  writes:
>
>> Maybe split it in 2 disks? One OS and one APP/DATA? You can then backup 
>> only one. 
>>  
>> I prefer to do this anyway as I then can just redeploy the OS and attach 
>> the second disk to get things back up and running. 
> Are you suggesting that /etc and /var should go onto their own disks?
> There is lots of configuration in /etc (which is usually in the root
> disk) that needs to be backed up.
>
> Also, different apps store configuration and data in different places,
> so saying "just put it on a second disk" can be hard.
>
> Sure, it works fine for /home -- but mysql?  imapd?  ...
>
> -derek

/etc for us is mostly generated by deployment and provisioning, in
production at least so that is not a problem. All changes have to go
through puppet/ansible.

The /var I have been putting on a seperate disk for a long time. And a
lot of VM's have separate disks for /data or /home.

So this combination works for us but it depends on your layout and
whether you have any provisioning/config management tools an procedures
running.

Regards,

Jorick Astrego





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YEUDZEG6VDQMESWGQ4UJOKS77ACVB6ZW/


[ovirt-users] Re: oVirt Open Source Backup solution?

2019-05-15 Thread Jorick Astrego
On 5/14/19 2:43 PM, Derek Atkins wrote:
> Strahil Nikolov  writes:
>
>> In such case ,
>> you use the same approach for the VM in whole - lock + snapshot on oVirt +
>> unlock.
>> This way you keep OS + app backup in one place , which has it's own Pluses 
>> and
>> Minuses.
> Sure  But the minus being it requires SIGNIFICANTLY more space.
> I've got over a dozen VMs, all running the same (pretty much) OS.
> If I based up the VM Snaphot there would be 12x space usage for OS
> files that I don't need to backup because I can recreate those from the
> initial repositories.  Of course, this is at the expense of more time to
> restore from the backup.
>
> YMMV.

Maybe split it in 2 disks? One OS and one APP/DATA? You can then backup
only one.

I prefer to do this anyway as I then can just redeploy the OS and attach
the second disk to get things back up and running.

Regards, Jorick Astrego



>> Best Regards,
>> Strahil Nikolov
> -derek




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/M2KBXD2LWZZYAX3RSNXEMZZLU5JNXEUS/


[ovirt-users] Re: Prevent 2 different VMs from running on the same host

2019-04-24 Thread Jorick Astrego
Hi,

Yes, use affinity groups for this

https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3-beta/html/virtual_machine_management_guide/sect-affinity_groups

*The VM Affinity Rule*

When you create an affinity group, you select the virtual machines
that belong to the group. To define /where these virtual machines
can run in relation to each other/, you enable a *VM Affinity Rule*:
A positive rule tries to run the virtual machines together on a
single host; a negative affinity rule tries to run the virtual
machines apart on separate hosts. If the rule cannot be fulfilled,
the outcome depends on whether the weight or filter module is enabled.

On 4/24/19 12:45 PM, Paulo Silva wrote:
> Hi,
>
> I have a cluster of 6 hosts using ovirt 4.3 and I want to make sure
> that 2 VMs are always started on different hosts.
> Is it possible to prevent 2 different VMs from running on the same
> physical host without specifying manually a different set of hosts
> where each VM can start running?
>
> Thanks
> -- 
> Paulo Silva mailto:paulo...@gmail.com>>
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQ4LVNAZMIL6RPZVFS5Z4URUJ2RHCHIH/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/DMSMGYVO5YW3HFSWH3FPBTBMCHJ32GKW/


[ovirt-users] spam

2019-04-09 Thread Jorick Astrego
We get a lot of spam lately, anything that can be done about this?

I see the list is powered by Mailman

https://wikitech.wikimedia.org/wiki/Lists.wikimedia.org#Fighting_spam_in_mailman





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5CEVNY337NJAT7JMRPX4D34WQN6JUPTE/


[ovirt-users] Re: genev_sys_6081 left/entered promiscuous mode

2019-04-09 Thread Jorick Astrego

On 3/26/19 2:17 PM, Arif Ali wrote:
> On 25-03-2019 23:11, Arif Ali wrote:
>> Hi all,
>>
>> I was wondering if anyone seen the messages below in the syslog. I see
>> this set every second, and I am not sure why this is the case, and
>> it's filling the logs quite a lot
>>
>> Mar 22 23:08:08  kernel: device genev_sys_6081 left promiscuous
>> mode
>> Mar 22 23:08:08  kernel: i40e :3d:00.0 eno3: port 6081
>> already offloaded
>> Mar 22 23:08:08  kernel: i40e :3d:00.1 eno4: port 6081
>> already offloaded
>> Mar 22 23:08:08  kernel: i40e :3d:00.2 eno5: port 6081
>> already offloaded
>> Mar 22 23:08:08  kernel: i40e :3d:00.3 eno6: port 6081
>> already offloaded
>> Mar 22 23:08:08  kernel: device genev_sys_6081 entered
>> promiscuous mode
>> Mar 22 23:08:09  kernel: i40e :3d:00.0 eno3: UDP port 6081
>> was not found, not deleting
>> Mar 22 23:08:09  kernel: i40e :3d:00.1 eno4: UDP port 6081
>> was not found, not deleting
>> Mar 22 23:08:09  kernel: i40e :3d:00.2 eno5: UDP port 6081
>> was not found, not deleting
>> Mar 22 23:08:09  kernel: i40e :3d:00.3 eno6: UDP port 6081
>> was not found, not deleting
>> Mar 22 23:08:09  kernel: device genev_sys_6081 left promiscuous
>> mode
>
> So on top of this, in the Events tab, I see the error shown below
>
> VDSM  command Get Host Statistics failed: Internal JSON-RPC
> error: {'reason': '[Errno 19] genev_sys_6081 is not present in the
> system'}
>
>
> I see the following in the vdsm log too
>
> Mar 26 13:10:44  vdsm[62558]: ERROR Internal server error
>   Traceback (most recent call last):
>     File
> "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in
> _handle_request
>   res = method(**params)
>     File
> "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 198, in
> _dynamicMethod
>   result = fn(*methodArgs)
>     File "", line 2, in
> getStats
>     File
> "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in method
>   ret = func(*args, **kwargs)
>     File
> "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1428, in getStats
>   multipath=True)}
>     File
> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 50, in
> get_stats
>   decStats =
> stats.produce(first_sample, last_sample)
>     File
> "/usr/lib/python2.7/site-packages/vdsm/host/stats.py", line 72, in
> produce
>  
> stats.update(get_interfaces_stats())
>     File
> "/usr/lib/python2.7/site-packages/vdsm/host/stats.py", line 154, in
> get_interfaces_stats
>   return net_api.network_stats()
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/api.py", line 63, in
> network_stats
>   return netstats.report()
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/netstats.py", line 32,
> in report
>   stats = link_stats.report()
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/link/stats.py", line
> 34, in report
>   stats[i.device] =
> i.statistics()
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line
> 232, in statistics
>   'state': 'up' if
> self.is_oper_up() else 'down',
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line
> 193, in is_oper_up
>   properties = self.properties()
>     File
> "/usr/lib/python2.7/site-packages/vdsm/network/link/iface.py", line
> 165, in properties
>   info = link.get_link(self._dev)
>             File
> &qu

[ovirt-users] Fwd: Re: VDI broker and oVirt

2019-04-05 Thread Jorick Astrego
Forward to the list.


 Forwarded Message 
Subject:Re: [ovirt-users] Re: VDI broker and oVirt
Date:   Fri, 05 Apr 2019 04:52:13 -0400
From:   a...@triadic.us



As far as official software, the best you'll find is the user portal.

There is also this...

https://github.com/nkovacne/ovirt-desktop-client

We used that as a code base for our own vdi connector using smart card
pksc12 certs to auth to the ovirt API.

On Apr 5, 2019 4:08 AM, Jorick Astrego  wrote:

Hi,

I think you mean to ask about the connection broker to connect to
your VDI infrastructure?

Something like this:

Or

https://www.leostream.com/solution/remote-access-for-virtual-and-physical-workstations/

Ovirt has the VM user portal https://github.com/oVirt/ovirt-web-ui ,
but I have never used a third party connection broker myself so I'm
not aware of any compatible with oVirt or RHEV...



On 4/4/19 9:10 PM, oquerej...@gmail.com
<mailto:oquerej...@gmail.com> wrote:

I have Ovirt installed, with two hypervisor and Ovirt engine. I Want To 
mount a VDI infrastructure, as cheap as possible, but robust and reliable. The 
question is what broker I can use. Thank you.
___
Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-le...@ovirt.org 
<mailto:users-le...@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/GLH7Y5HCOMBYL7QBPOGOPRTQY247GNUD/





Met vriendelijke groet, With kind regards,

Jorick Astrego
*
Netbulae Virtualization Experts *

Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3AKvK 
08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA EnschedeBTW
NL821234584B01









Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3CF4SKHPBC3KSWF6U6CHCOGBJ5M3N63R/


[ovirt-users] Re: VDI broker and oVirt

2019-04-05 Thread Jorick Astrego
Hi,

I think you mean to ask about the connection broker to connect to your
VDI infrastructure?

Something like this:

Or
https://www.leostream.com/solution/remote-access-for-virtual-and-physical-workstations/

Ovirt has the VM user portal https://github.com/oVirt/ovirt-web-ui , but
I have never used a third party connection broker myself so I'm not
aware of any compatible with oVirt or RHEV...



On 4/4/19 9:10 PM, oquerej...@gmail.com wrote:
> I have Ovirt installed, with two hypervisor and Ovirt engine. I Want To mount 
> a VDI infrastructure, as cheap as possible, but robust and reliable. The 
> question is what broker I can use. Thank you.
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/GLH7Y5HCOMBYL7QBPOGOPRTQY247GNUD/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EHSULIYRXUYFGDDFVQT7SAIKOBGVQASY/


[ovirt-users] Profile selection in VM portal for users

2019-02-10 Thread Jorick Astrego
Hi,

Wish I was @FOSDEM :'(  Next year...

When accessing the selfservice VM portal for users we wish to
disable/hide our admin management realm.

Is there currently a way to do this? We are maybe a bit paranoid but
informatie leakage can bite you in the ass.

We want to hookup Keycloak for the user portal and use the current ipa
authentication for the admins only




  
Met vriendelijke groet,
With kind regards,

Jorick Astrego


           
                   
               
    THE IDIOT COMPANY  
    Staalsteden 4-3A
 7547 TA Enschede 
 The Netherlands    +31 (0)53 20 30 275
 i...@theidiotcompany.eu
 WWW.THEIDIOTCOMPANY.EU   
    
    
  
                    
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/LTQ4MVDBYKHX3ERRN5TVHUP5RUEVCJFG/


[ovirt-users] Re: Agentless Backup update: Trilio Vault, pay $7500

2019-02-08 Thread Jorick Astrego
Hi,

We are currently starting an evaluation of
https://wiki.sep.de/wiki/index.php/RHEV_backup

Our experiences with the supplier are excellent and it has been out for
a while now.

Testing of the actual software is scheduled for this month.

Regards, Jorick Astrego

Netbulae B.V.

On 2/8/19 12:27 PM, Sinan Polat wrote:
> Thanks for your post. I was recently looking for backup solutions
> which supports RHV/oVirt and OpenStack. I saw Trilio is providing
> this, but if I read your experience we should stay away from it.
>
> Other experiences?
>
> Op 8 feb. 2019 om 12:15 heeft femi adegoke  <mailto:ov...@fateknollogee.com>> het volgende geschreven:
>
>> For some weird reason, I don't see my original comments on the
>> list.ovirt forum pages.
>> Here it is:
>>
>> Back in June of 2018, I posted regarding Agentless backup solutions.
>> Greg Sheremeta replied & mentioned Trilio.
>>
>> The rest of the story...well just read on...
>>
>> These guys at Trilio have turned out to be a complete waste of time.
>> (I could use some more colorful language)
>>
>> After my post & reply from Greg Sheremeta, I followed up with Trilio.
>> A lot of promises/dates were made (by Trilio) as to when a beta would
>> be made available for testing.
>> Needless to say, they never came through.
>> Finally in Dec 2018, they said we are ready for the demo, we will
>> show you a working product.
>> The day came, Trilio said, sorry it's too close to Xmas, we will
>> postpone the demo's till 2019.
>> In 2019, I continued to follow up & finally they set a date for
>> another demo - Jan 29.
>> On Jan. 29, we get on the Webex, they said, sorry the demo just broke
>> 10 mins prior to our call, so no demo.
>> They show me some screenshots & their OpenStack version & again
>> promise to get me beta software in a few days.
>> I continue to follow up (via email)
>>
>> Yesterday (Feb 6), I get an email from Thomas Lahive GM; Sales and
>> Alliance Partners(copied & pasted below):
>> "We started RHV betas and decided to prioritize current Trilio
>> customers (those that purchased Triliovault for Openstack).  
>> If you would like to be part of the beta now then We can sign you up
>> as a certified Trilio reseller which has a $7,500 Starter Fee. The
>> $7,500 will be credited against your first customer order that is at
>> least $7,500 so it will eventually cost you nothing. Many of our
>> partners can apply the fee against revenue so it's a great tax
>> incentive, but you can confirm with your finance department.   
>> Please Lmk how you would like to proceed."
>>
>> Please remember, I have never seen a working demo of this product, never.
>>
>> Is this typical behavior of RH partners?
>>
>> On Feb 7 2019, at 9:05 pm, Strahil > <mailto:hunter86...@yahoo.com>> wrote:
>>
>> Hey Femi,
>>
>> Just run away ... For me it seems, that they don't have that
>> software ready for ovirt.
>>
>> Best Regards,
>> Strahil Nikolov
>> ___
>> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
>> To unsubscribe send an email to users-le...@ovirt.org
>> <mailto:users-le...@ovirt.org>
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/UZZCFDJYQLPYGYTCVC5V2HUNADOULWSX/
>>
>> ___
>> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
>> To unsubscribe send an email to users-le...@ovirt.org
>> <mailto:users-le...@ovirt.org>
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/PAG3ODCH3OKRUYA3HCQLIME2BWV4DT73/
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/TJDOJGS3UKXFNKIJ6H4BAYPBOKWWZIQG/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netb

[ovirt-users] "Volume Option cluster.granular-entry-heal=enable could not be set" when using "Optimize for Virt store"

2019-02-06 Thread Jorick Astrego
Hi again,

When using the option "Optimize for Virt store", I get the following error:

2019-02-06 10:25:02,353+01 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-15727)
[051cfc8c-9efc-427c-9e2e-9127e3e0a86d] EVENT_ID:
GLUSTER_VOLUME_OPTION_SET_FAILED(4,003), Volume Option
cluster.granular-entry-heal=enable could not be set on ssd9 of
cluster GlusterFS-storage.

This looks like the same issue as
https://bugzilla.redhat.com/show_bug.cgi?id=1635684

Volume set option 'granular-entry-heal' is not longer set via
gluster volume set option.

Is this a known issue or should I open a bug for this?





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/HYEJJPEJISYSQCQLPT45AUAHEOKWBKN5/


[ovirt-users] Re: But in the web interface?

2019-02-05 Thread Jorick Astrego
Hi,

Reported it already:

https://bugzilla.redhat.com/show_bug.cgi?id=1665430

Regards,

Jorick Astrego

On 2/5/19 10:25 AM, Hetz Ben Hamo wrote:
> Hi,
>
> I upgraded to 4.3 and on the hosted engine web interface, I see the
> "dashboard" button twice, one below the other.
>
> How can I fix it or is it a known bug?
>
> Thanks
> Hetz
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/JZAMX5B2GLLITIDGW24B5GY6UQI7D5QO/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UFFNGNQEHNJHX4MYEJIJF6KSRLJNWBLZ/


[ovirt-users] Profile selection in VM portal for users

2019-02-01 Thread Jorick Astrego
Hi,

Wish I was @FOSDEM :'(  Next year...

When accessing the selfservice VM portal for users we wish to
disable/hide our admin management realm.

Is there currently a way to do this? We are maybe a bit paranoid but
informatie leakage can bite you in the ass.

We want to hookup Keycloak for the user portal and use the current ipa
authentication for the admins only






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/53HSD2WUAK6GGSWCDDZ6SO7FOEBIY267/


[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng

2019-01-29 Thread Jorick Astrego
Hi,

I know people are busy but do we have any progress on this, I removed
the OVS cluster and recreated it with bridge networking.

But I'm still stuck on the "failed to fetch volume file" and am unable
to activate the hosts to continue testing...

Anything else I can try to debug? The storage network is ip based
without dns.

Regards, Jorick

On 1/25/19 3:53 PM, Jorick Astrego wrote:
>
>
> On 1/25/19 3:26 PM, Sahina Bose wrote:
>>
>>
>> On Fri, Jan 25, 2019 at 7:36 PM Jorick Astrego > <mailto:jor...@netbulae.eu>> wrote:
>>
>>>
>>> The mount failure is probably related to glusterfs. There are
>>> glusterfs logs on the host that 
>>> can give more info on this error. 
>> Oh duh, sorry forgot to check :-&
>>
>> "failed to fetch volume file"
>>
>>
>> [2019-01-25 14:02:45.067440] I
>> [glusterfsd-mgmt.c:2424:mgmt_rpc_notify] 0-glusterfsd-mgmt:
>> disconnected from remote-host: *.*.*.*
>>
>> Are you able to access this host, and the gluster ports open?
>> Anything in the glusterd.log of the gluster server?
>>
>> Adding Sanju to help
>
>
> From the host:
>
> Telnet *.*.*.14 24007
> Trying *.*.*.14...
> Connected to *.*.*.14.
> Escape character is '^]'.
>
> glusterd.log on *.*.*.14:
>
> Chain INPUT (policy ACCEPT)
> target prot opt source   destination
> ACCEPT all  --  anywhere anywhere
> state RELATED,ESTABLISHED
> ACCEPT icmp --  anywhere anywhere   
> ACCEPT all  --  anywhere anywhere   
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:54321
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:54322
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:sunrpc
> ACCEPT udp  --  anywhere anywhere udp
> dpt:sunrpc
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:ssh
> ACCEPT udp  --  anywhere anywhere udp
> dpt:snmp
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:websm
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:24007
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:webcache
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:38465
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:38466
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:38467
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:nfs
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:38469
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:5666
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:39543
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:55863
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:38468
> ACCEPT udp  --  anywhere anywhere udp
> dpt:963
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:965
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:ctdb
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:netbios-ssn
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:microsoft-ds
> ACCEPT tcp  --  anywhere anywhere tcp
> dpts:24009:24108
> ACCEPT tcp  --  anywhere anywhere tcp
> dpts:49152:49251
> ACCEPT tcp  --  anywhere anywhere tcp
> dpts:49217:49316
> ACCEPT tcp  --  anywhere anywhere tcp
> dpt:zabbix-agent /* Zabbix agent */
> REJECT all  --  anywhere anywhere
> reject-with icmp-host-prohibited
>
> Chain FORWARD (policy ACCEPT)
> target prot opt source   destination
> REJECT all  --  anywhere anywhere
> PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited
>
> Chain OUTPUT (policy ACCEPT)
> target prot opt source   destination
>
> And in the glusterd.log has nothing else but:
>
> [2019-01-25 11:02:32.617694] I [MSGID: 10

[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8

2019-01-29 Thread Jorick Astrego
To add to that, I removed the nodes and reinstalled without OVS so it's
weird it still complains about it.

Regards,

Jorick

On 1/29/19 12:40 AM, Jorick Astrego wrote:
>
> Noticed this one too on 4.3.0 rc2, didn't have time to check it out
> though.
>
> Today I saw it after I removed an OVS cluster and recreated the
> cluster with "legacy" bridge networking.
>
> Regards,
>
> Jorick Astrego
>
> Netbulae
>
>
> On 1/28/19 2:34 PM, Jayme wrote:
>> I upgraded oVirt to 4.2.8 and now I am spammed with the following
>> message in all host syslog.  How can I stop/fix this error?
>>
>> ovs-vsctl: ovs|1|db_ctl_base|ERR|no key
>> "odl_os_hostconfig_hostid" in Open_vSwitch record "." column external_ids
>>
>> ___
>> Users mailing list -- users@ovirt.org
>> To unsubscribe send an email to users-le...@ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct: 
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives: 
>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/OH2VH3AYBRCNVM24PTP34OTS5ISYLUAD/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EDN2E2QDM3H4IEHNOBZV6A64XEHLYTJJ/


[ovirt-users] Re: Open_vSwitch no key error after upgrading to 4.2.8

2019-01-28 Thread Jorick Astrego
Noticed this one too on 4.3.0 rc2, didn't have time to check it out though.

Today I saw it after I removed an OVS cluster and recreated the cluster
with "legacy" bridge networking.

Regards,

Jorick Astrego

Netbulae


On 1/28/19 2:34 PM, Jayme wrote:
> I upgraded oVirt to 4.2.8 and now I am spammed with the following
> message in all host syslog.  How can I stop/fix this error?
>
> ovs-vsctl: ovs|1|db_ctl_base|ERR|no key "odl_os_hostconfig_hostid"
> in Open_vSwitch record "." column external_ids
>
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/OH2VH3AYBRCNVM24PTP34OTS5ISYLUAD/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ASUGIXCS5W5YKHUTNFUZSJT2S6SZW5A4/


[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng

2019-01-25 Thread Jorick Astrego

On 1/25/19 3:26 PM, Sahina Bose wrote:
>
>
> On Fri, Jan 25, 2019 at 7:36 PM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
>>
>> The mount failure is probably related to glusterfs. There are
>> glusterfs logs on the host that 
>> can give more info on this error. 
> Oh duh, sorry forgot to check :-&
>
> "failed to fetch volume file"
>
>
> [2019-01-25 14:02:45.067440] I
> [glusterfsd-mgmt.c:2424:mgmt_rpc_notify] 0-glusterfsd-mgmt:
> disconnected from remote-host: *.*.*.*
>
> Are you able to access this host, and the gluster ports open?
> Anything in the glusterd.log of the gluster server?
>
> Adding Sanju to help


>From the host:

Telnet *.*.*.14 24007
Trying *.*.*.14...
Connected to *.*.*.14.
Escape character is '^]'.

glusterd.log on *.*.*.14:

Chain INPUT (policy ACCEPT)
target prot opt source   destination
ACCEPT all  --  anywhere anywhere state
RELATED,ESTABLISHED
ACCEPT icmp --  anywhere anywhere   
ACCEPT all  --  anywhere anywhere   
ACCEPT tcp  --  anywhere anywhere tcp
dpt:54321
ACCEPT tcp  --  anywhere anywhere tcp
dpt:54322
ACCEPT tcp  --  anywhere anywhere tcp
dpt:sunrpc
ACCEPT udp  --  anywhere anywhere udp
dpt:sunrpc
ACCEPT tcp  --  anywhere anywhere tcp
dpt:ssh
ACCEPT udp  --  anywhere anywhere udp
dpt:snmp
ACCEPT tcp  --  anywhere anywhere tcp
dpt:websm
ACCEPT tcp  --  anywhere anywhere tcp
dpt:24007
ACCEPT tcp  --  anywhere anywhere tcp
dpt:webcache
ACCEPT tcp  --  anywhere anywhere tcp
dpt:38465
ACCEPT tcp  --  anywhere anywhere tcp
dpt:38466
ACCEPT tcp  --  anywhere anywhere tcp
dpt:38467
ACCEPT tcp  --  anywhere anywhere tcp
dpt:nfs
ACCEPT tcp  --  anywhere anywhere tcp
dpt:38469
ACCEPT tcp  --  anywhere anywhere tcp
dpt:5666
ACCEPT tcp  --  anywhere anywhere tcp
dpt:39543
ACCEPT tcp  --  anywhere anywhere tcp
dpt:55863
ACCEPT tcp  --  anywhere anywhere tcp
dpt:38468
ACCEPT udp  --  anywhere anywhere udp
dpt:963
ACCEPT tcp  --  anywhere anywhere tcp
dpt:965
ACCEPT tcp  --  anywhere anywhere tcp
dpt:ctdb
ACCEPT tcp  --  anywhere anywhere tcp
dpt:netbios-ssn
ACCEPT tcp  --  anywhere anywhere tcp
dpt:microsoft-ds
ACCEPT tcp  --  anywhere anywhere tcp
dpts:24009:24108
ACCEPT tcp  --  anywhere anywhere tcp
dpts:49152:49251
ACCEPT tcp  --  anywhere anywhere tcp
dpts:49217:49316
ACCEPT tcp  --  anywhere anywhere tcp
dpt:zabbix-agent /* Zabbix agent */
REJECT all  --  anywhere anywhere
reject-with icmp-host-prohibited

Chain FORWARD (policy ACCEPT)
target prot opt source   destination
REJECT all  --  anywhere anywhere
PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited

Chain OUTPUT (policy ACCEPT)
target prot opt source   destination

And in the glusterd.log has nothing else but:

[2019-01-25 11:02:32.617694] I [MSGID: 106499]
[glusterd-handler.c:4303:__glusterd_handle_status_volume]
0-management: Received status volume req for volume ssd6
[2019-01-25 11:02:32.623892] I [MSGID: 106499]
[glusterd-handler.c:4303:__glusterd_handle_status_volume]
0-management: Received status volume req for volume ssd9
[2019-01-25 11:03:31.847006] I [MSGID: 106488]
[glusterd-handler.c:1548:__glusterd_handle_cli_get_volume]
0-management: Received get vol req
[2019-01-25 11:04:33.023685] I [MSGID: 106499]
[glusterd-handler.c:4303:__glusterd_handle_status_volume]
0-management: Received status volume req for volume hdd2
[2019-01-25 11:04:33.030549] I [MSGID: 106499]
[glusterd-handler.c:4303:__glusterd_handle_status_volume]
0-management: Received status volume req for volume sdd8
[2019-01-25 11:04:33.037024] I [MSGID: 106499]
[glusterd-handler.c:4303:__glusterd_handle_status_vo

[ovirt-users] Re: 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng

2019-01-25 Thread Jorick Astrego
>
> The mount failure is probably related to glusterfs. There are
> glusterfs logs on the host that 
> can give more info on this error. 
Oh duh, sorry forgot to check :-&

"failed to fetch volume file"

[2019-01-25 13:47:03.560677] I [MSGID: 100030] [glusterfsd.c:2691:main]
0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 5.2
(args: /usr/sbin/glusterfs --process-name fuse --volfile-server=*.*.*.*
--volfile-server=*.*.*.* --volfile-server=*.*.*.* --volfile-id=ssd5
/rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5)
[2019-01-25 13:47:03.571819] I [MSGID: 101190]
[event-epoll.c:622:event_dispatch_epoll_worker] 0-epoll: Started thread
with index 1
[2019-01-25 14:02:45.067440] I [glusterfsd-mgmt.c:2424:mgmt_rpc_notify]
0-glusterfsd-mgmt: disconnected from remote-host: *.*.*.*
[2019-01-25 14:02:45.067500] I [glusterfsd-mgmt.c:2464:mgmt_rpc_notify]
0-glusterfsd-mgmt: connecting to next volfile server *.*.*.*
[2019-01-25 14:02:45.069678] E [rpc-clnt.c:346:saved_frames_unwind] (-->
/lib64/libglusterfs.so.0(_gf_log_callingfn+0x13b)[0x7f2b0b7f4f1b] (-->
/lib64/libgfrpc.so.0(+0xce11)[0x7f2b0b5bde11] (-->
/lib64/libgfrpc.so.0(+0xcf2e)[0x7f2b0b5bdf2e] (-->
/lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x91)[0x7f2b0b5bf531]
(--> /lib64/libgfrpc.so.0(+0xf0d8)[0x7f2b0b5c00d8] ) 0-glusterfs:
forced unwinding frame type(GlusterFS Handshake) op(GETSPEC(2)) called
at 2019-01-25 13:47:03.572632 (xid=0x2)
[2019-01-25 14:02:45.069697] E [glusterfsd-mgmt.c:2136:mgmt_getspec_cbk]
0-mgmt: failed to fetch volume file (key:ssd5)
[2019-01-25 14:02:45.069725] W [glusterfsd.c:1481:cleanup_and_exit]
(-->/lib64/libgfrpc.so.0(+0xce32) [0x7f2b0b5bde32]
-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x841) [0x5651101b7231]
-->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x5651101afbbb] ) 0-:
received signum (0), shutting down
[2019-01-25 14:02:45.069749] I [fuse-bridge.c:5897:fini] 0-fuse:
Unmounting '/rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5'.
[2019-01-25 14:02:45.078949] I [fuse-bridge.c:5902:fini] 0-fuse: Closing
fuse connection to '/rhev/data-center/mnt/glusterSD/*.*.*.*:ssd5'.
[2019-01-25 14:02:45.079035] W [glusterfsd.c:1481:cleanup_and_exit]
(-->/lib64/libpthread.so.0(+0x7dd5) [0x7f2b0a656dd5]
-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xe5) [0x5651101afd45]
-->/usr/sbin/glusterfs(cleanup_and_exit+0x6b) [0x5651101afbbb] ) 0-:
received signum (15), shutting down

On 1/25/19 2:55 PM, Nir Soffer wrote:
> On Fri, Jan 25, 2019 at 3:18 PM Jorick Astrego  <mailto:jor...@netbulae.eu>> wrote:
>
> Hi,
>
> We're having problems mounting the preexisting 3.12 glusterfs
> storage domains in ovirt node ng 4.3.0 rc2.
>
> Getting
>
> There are no iptables blocks on the storage network, the ip's are
> pingable bothe ways. I can telnet to the glusterfs ports and I see
> no messages in the logs of the glusterfs servers.
>
> When I try the mount command manually it hangs for ever:
>
> /usr/bin/mount -t glusterfs -o
> backup-volfile-servers=*.*.*.*:*.*.*.* *.*.*.*:/sdd8 /mnt/temp
>
> I haven't submitted a bug yet
>
> from supervdsm.log
>
> MainProcess|jsonrpc/2::DEBUG::2019-01-25
> 13:42:45,282::supervdsm_server::100::SuperVdsm.ServerCallback::(wrapper)
> call volumeInfo with (u'sdd8', u'*.*.*.*') {}
> MainProcess|jsonrpc/2::DEBUG::2019-01-25
> 13:42:45,282::commands::198::root::(execCmd) /usr/bin/taskset
> --cpu-list 0-63 /usr/sbin/gluster --mode=script volume info
> --remote-host=*.*.*.* sdd8 --xml (cwd None)
> MainProcess|jsonrpc/2::DEBUG::2019-01-25
> 13:44:45,399::commands::219::root::(execCmd) FAILED:  = '';
>  = 1
> MainProcess|jsonrpc/2::DEBUG::2019-01-25
> 13:44:45,399::logutils::319::root::(_report_stats) ThreadedHandler
> is ok in the last 120 seconds (max pending: 2)
>
>
> This looks like
> https://bugzilla.redhat.com/show_bug.cgi?id=1666123#c18
>
> We should see "ThreadedHandler is ok" every 60 seconds when using
> debug log level.
>
> Looks like your entire supervdsmd process was hang for 120 seconds.
>  
>
> MainProcess|jsonrpc/2::ERROR::2019-01-25
> 13:44:45,399::supervdsm_server::104::SuperVdsm.ServerCallback::(wrapper)
> Error in volumeInfo
> Traceback (most recent call last):
>   File
> "/usr/lib/python2.7/site-packages/vdsm/supervdsm_server.py", line
> 102, in wrapper
>     res = func(*args, **kwargs)
>   File "/usr/lib/python2.7/site-packages/vdsm/gluster/cli.py",
> line 529, in volumeInfo
>     xmltree = _execGlusterXml(command)
>   File "/usr/lib/python2.7/site-packages/vdsm/gluster/cli.py",
> line 131, in _execGlusterXml
>     return _getTree(rc, out, err)
>   F

[ovirt-users] 4.3.0 rc2 cannot mount glusterfs volumes on ovirt node ng

2019-01-25 Thread Jorick Astrego
/site-packages/yajsonrpc/__init__.py", line
262, in __call__
  self._handler(self._ctx, self._req)
File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line
305, in _serveRequest
  response = self._handle_request(req, ctx)
File: "/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line
345, in _handle_request
  res = method(**params)
File: "/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 194,
in _dynamicMethod
  result = fn(*methodArgs)
File: "/usr/lib/python2.7/site-packages/vdsm/API.py", line 1103, in
connectStorageServer
  connectionParams)
File: "/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py",
line 72, in wrapper
  result = ctask.prepare(func, *args, **kwargs)
File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108,
in wrapper
  return m(self, *a, **kw)
File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line
1179, in prepare
  result = self._run(func, *args, **kwargs)
File: "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882,
in _run
  return fn(*args, **kargs)
File: "", line 2, in connectStorageServer
File: "/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in
method
  ret = func(*args, **kwargs)
File: "/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2410,
in connectStorageServer
  conObj.connect()

from messages:

Jan 25 13:49:07 node9 vdsm[31968]: WARN Worker blocked:  timeout=60,
duration=840.00 at 0x7f9be82ffa50> task#=93 at 0x7f9be83bba10>,
traceback:#012File: "/usr/lib64/python2.7/threading.py", line 785, in
__bootstrap#012  self.__bootstrap_inner()#012File:
"/usr/lib64/python2.7/threading.py", line 812, in __bootstrap_inner#012 
self.run()#012File: "/usr/lib64/python2.7/threading.py", line 765, in
run#012  self.__target(*self.__args, **self.__kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/common/concurrent.py", line 195,
in run#012  ret = func(*args, **kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 301, in
_run#012  self._execute_task()#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 315, in
_execute_task#012  task()#012File:
"/usr/lib/python2.7/site-packages/vdsm/executor.py", line 391, in
__call__#012  self._callable()#012File:
"/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 262, in
__call__#012  self._handler(self._ctx, self._req)#012File:
"/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 305, in
_serveRequest#012  response = self._handle_request(req, ctx)#012File:
"/usr/lib/python2.7/site-packages/yajsonrpc/__init__.py", line 345, in
_handle_request#012  res = method(**params)#012File:
"/usr/lib/python2.7/site-packages/vdsm/rpc/Bridge.py", line 194, in
_dynamicMethod#012  result = fn(*methodArgs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/API.py", line 1103, in
connectStorageServer#012  connectionParams)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/dispatcher.py", line 72,
in wrapper#012  result = ctask.prepare(func, *args, **kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 108, in
wrapper#012  return m(self, *a, **kw)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 1179, in
prepare#012  result = self._run(func, *args, **kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line 882, in
_run#012  return fn(*args, **kargs)#012File: "", line 2, in
connectStorageServer#012File:
"/usr/lib/python2.7/site-packages/vdsm/common/api.py", line 50, in
method#012  ret = func(*args, **kwargs)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/hsm.py", line 2410, in
connectStorageServer#012  conObj.connect()#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/storageServer.py", line
172, in connect#012  self._mount.mount(self.options, self._vfsType,
cgroup=self.CGROUP)#012File:
"/usr/lib/python2.7/site-packages/vdsm/storage/mount.py", line 207, in
mount#012  cgroup=cgroup)#012File:
"/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 56, in
__call__#012  return callMethod()#012File:
"/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 54, in
#012  **kwargs)#012File: "", line 2, in mount#012File:
"/usr/lib64/python2.7/multiprocessing/managers.py", line 759, in
_callmethod#012  kind, result = conn.recv()







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UEFI2DXVP4D4B4J5WN2DL5SBSZSIOHFD/


[ovirt-users] Re: [ANN] oVirt 4.3.0 Third Release Candidate is now available for testing

2019-01-25 Thread Jorick Astrego
Hi Sandro,

Is there a list with the changes/fixes from rc1 > rc2 > rc3?

Regards,

Jorick Astrego


On 1/24/19 2:10 PM, Sandro Bonazzola wrote:
>
> The oVirt Project is pleased to announce the availability of the Third
> Release Candidate of oVirt 4.3.0, as of January 24th, 2018
>
>
> This is pre-release software. This pre-release should not to be used
> in production.
>
>
> Please take a look at our community page[1] to learn how to ask
> questions and interact with developers and users.
>
> All issues or bugs should be reported via oVirt Bugzilla[2].
>
>
> This update is the first release candidate of the 4.3.0 version.
>
> This release brings more than 130 enhancements and more than 450 bug
> fixes on top of oVirt 4.2 series.
>
>
> What's new in oVirt 4.3.0?
>
> * Q35 chipset, support booting using UEFI and Secure Boot
>
> * Skylake-server and AMD EPYC support
>
> * New smbus driver in windows guest tools
>
> * Improved support for v2v
>
> * OVA export / import of Templates
>
> * Full support for live migration of High Performance VMs
>
> * Microsoft Failover clustering support (SCSI Persistent Reservation)
> for Direct LUN disks
>
> * Hundreds of bug fixes on top of oVirt 4.2 series
>
> * New VM portal details page (see a preview here:
> https://imgur.com/a/ExINpci)
>
> * New Cluster upgrade UI
>
> * OVN security groups
>
> * IPv6 (static host addresses)
>
> * Support of Neutron from RDO OpenStack 13 as external network provider
>
> * Support of using Skydive from RDO OpenStack 14 as Tech Preview
>
> * Support for 3.6 and 4.0 data centers, clusters and hosts were removed
>
> * Now using PostgreSQL 10
>
> * New metrics support using rsyslog instead of fluentd
>
>
>
> This release is available now on x86_64 architecture for:
>
> * Red Hat Enterprise Linux 7.6 or later
>
> * CentOS Linux (or similar) 7.6 or later
>
>
>
> This release supports Hypervisor Hosts on x86_64 and ppc64le
> architectures for:
>
> * Red Hat Enterprise Linux 7.6 or later
>
> * CentOS Linux (or similar) 7.6 or later
>
> * oVirt Node 4.3 (available for x86_64 only)
>
>
> Experimental tech preview for x86_64 and s390x architectures for
> Fedora 28 is also included.
>
>
> See the release notes draft [3] for installation / upgrade
> instructions and a list of new features and bugs fixed.
>
>
> Notes:
>
> - oVirt Appliance is already available for both CentOS 7 and Fedora 28
> (tech preview).
>
> - oVirt Node NG  is already available for CentOS 7
>
> - oVirt Node NG for Fedora 28 (tech preview) is being delayed due to
> build issues with the build system.
>
>
> Additional Resources:
>
> * Read more about the oVirt 4.3.0 release highlights:
> http://www.ovirt.org/release/4.3.0/
>
> * Get more oVirt project updates on Twitter: https://twitter.com/ovirt
>
> * Check out the latest project news on the oVirt blog:
> http://www.ovirt.org/blog/
>
>
>
> [1] https://www.ovirt.org/community/
>
> [2] https://bugzilla.redhat.com/enter_bug.cgi?classification=oVirt
>
> [3] http://www.ovirt.org/release/4.3.0/
>
> [4] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/
>
>
>
> -- 
>
> SANDRO BONAZZOLA
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R RHV
>
> Red Hat EMEA <https://www.redhat.com/>
>
> sbona...@redhat.com <mailto:sbona...@redhat.com>   
>
> <https://red.ht/sig>
>
>
> _______
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct: 
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives: 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/CFX4K7K6WTVVVQJHP2XAAZQYSNMOFXYI/




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VTG2COKN2TOW23ZKYFW3K2AWNRFYPMYS/


[ovirt-users] Re: ovirtmgmt always out of sync on ovirt node

2019-01-18 Thread Jorick Astrego

On 1/18/19 11:12 AM, Sandro Bonazzola wrote:
>
>
> Il giorno ven 18 gen 2019 alle ore 10:05 Jorick Astrego
> mailto:jor...@netbulae.eu>> ha scritto:
>
> Hi,
>
> We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7,
> 4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on
> 4.3rc2) the ovirtmgmt interface is always out of sync.
>
> Tried synching the network and refresh capabilities. I also tried
> removing ovirtmgmt from the interface and adding it to a bond,
> then I get this error:
>
> Cannot setup Networks. The following Network definitions on
> the Network Interface are different than those on the Logical
> Network. Please synchronize the Network Interface before
> editing network ovirtmgmt. The non-synchronized values are:
> ${OUTAVERAGELINKSHARE} ${HOST_OUT_OF_SYNC} - null,
> ${DC_OUT_OF_SYNC} - 50
>
> I can setup the bond at install so the ovirtmgmt will use it so I
> can use the host, but I'm hesitant to do this in production as I
> cannot change the interface anymore.
>
>
> Thanks for the report Jorick, adding some people for investigating on
> this issue.
> Did you open a bug to track this? If I understood correctly this
> affects ovirt-engine from 4.3.0 rc2 with ovirt-node-ng both from
> stable 4.2.7 and from pre release rc1 and rc2 right?

Yep, BZ:

https://bugzilla.redhat.com/show_bug.cgi?id=1667411

> Did you see same issue with engine 4.2.7 and node-ng 4.2.7? If not,
> seems to be a regression in ovirt-engine.
>
>
Sorry didn't try, I had already upgraded the engine. Will see if I can
reproduce on the older version.

>  
>
> Regards,
>
> Jorick Astrego
>
>
>
>
>
> Met vriendelijke groet, With kind regards,
>
> Jorick Astrego
> *
> Netbulae Virtualization Experts *
> 
> Tel: 053 20 30 270i...@netbulae.eu <mailto:i...@netbulae.eu>
> Staalsteden 4-3A  KvK 08198180
> Fax: 053 20 30 271www.netbulae.eu <http://www.netbulae.eu>
> 7547
> TA Enschede   BTW NL821234584B01
>
>
> 
>
> ___
> Users mailing list -- users@ovirt.org <mailto:users@ovirt.org>
> To unsubscribe send an email to users-le...@ovirt.org
> <mailto:users-le...@ovirt.org>
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> 
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4SMWRA4DDA5P3DO5NAKPRUWK42QZVGJ/
>
>
>
> -- 
>
> SANDRO BONAZZOLA
>
> MANAGER, SOFTWARE ENGINEERING, EMEA R RHV
>
> Red Hat EMEA <https://www.redhat.com/>
>
> sbona...@redhat.com <mailto:sbona...@redhat.com>   
>
> <https://red.ht/sig>
>




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KRAMOKD2XKZ2RSGK2JUSYP63PHITUXE7/


[ovirt-users] Re: ovirt node ng 4.3.0 rc1 upgrade fails

2019-01-18 Thread Jorick Astrego

On 1/18/19 11:23 AM, Sandro Bonazzola wrote:
>
>
> Il giorno ven 18 gen 2019 alle ore 11:23 Sandro Bonazzola
> mailto:sbona...@redhat.com>> ha scritto:
>
>
>
> Il giorno ven 11 gen 2019 alle ore 14:41 Jorick Astrego
> mailto:jor...@netbulae.eu>> ha scritto:
>
> Hi,
>
> Trying to update oVirt Node 4.2.7.1 to 4.3.0, but it fails
> with the following dependencies:
>
>
> thanks Jorick for the report! looks like the disabling of the
> repos and the filtering on the node upgrade package is broken.
> We'll investigate on this.
>
>
> Did you open a BZ about this?


I can see the standard repos (base, updates) are not enabled.


Created the BZ now:

https://bugzilla.redhat.com/show_bug.cgi?id=1667403

Also created one for rc1 to rc2:

https://bugzilla.redhat.com/show_bug.cgi?id=1667406



>  
>
>
>
>  
>
>     "Loaded plugins: enabled_repos_upload,
> fastestmirror, imgbased-persist,\n  :
> package_upload, product-id, search-disabled-repos,
> subscription-\n  : manager, vdsmupgrade\nThis
> system is not registered with an entitlement server. You
> can use subscription-manager to register.\nLoading mirror
> speeds from cached hostfile\n * ovirt-4.3-epel:
> ftp.nluug.nl\nResolving <ftp://ftp.nluug.nl%5CnResolving>
> Dependencies\n--> Running transaction check\n---> Package
> ovirt-host.x86_64 0:4.2.3-1.el7 will be updated\n--->
> Package ovirt-host.x86_64 0:4.3.0-1.el7 will be an
> update\n--> Processing Dependency: ovirt-host-dependencies
> = 4.3.0-1.el7 for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> aide for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: openscap for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> openscap-utils for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: scap-security-guide for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Running transaction
> check\n---> Package ovirt-host.x86_64 0:4.3.0-1.el7 will
> be an update\n--> Processing Dependency: aide for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: openscap-utils for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: scap-security-guide for package:
> ovirt-host-4.3.0-1.el7.x86_64\n---> Package
> ovirt-host-dependencies.x86_64 0:4.2.3-1.el7 will be
> updated\n---> Package ovirt-host-dependencies.x86_64
> 0:4.3.0-1.el7 will be an update\n--> Processing
> Dependency: vdsm >= 4.30.5 for package:
> ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Processing
> Dependency: vdsm-client >= 4.30.5 for package:
> ovirt-host-dependencies-4.3.0-1.el7.x86_64\n--> Running
> transaction check\n---> Package ovirt-host.x86_64
> 0:4.3.0-1.el7 will be an update\n--> Processing
> Dependency: aide for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> openscap for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: openscap-utils for package:
> ovirt-host-4.3.0-1.el7.x86_64\n--> Processing Dependency:
> pam_pkcs11 for package: ovirt-host-4.3.0-1.el7.x86_64\n-->
> Processing Dependency: scap-security-guide for package:
> ovirt-host-4.3.0-1.el7.x86_64\n---> Package vdsm.x86_64
> 0:4.20.43-1.el7 will be updated\n--> Processing
> Dependency: vdsm = 4.20.43-1.el7 for package:
> vdsm-hook-ethtool-options-4.20.43-1.el7.noarch\n-->
> Processing Dependency: vdsm = 4.20.43-1.el7 for package:
> vdsm-gluster-4.20.43-1.el7.x86_64\n--> Processing
> Dependency: vdsm = 4.20.43-1.el7 for package:
> vdsm-hook-vmfex-dev-4.20.43-1.el7.noarch\n--> Processing
> Dependency: vdsm = 4.20.43-1.el7 for package:
> vdsm-hook-fcoe-4.20.43-1.el7.noarch\n-

[ovirt-users] ovirtmgmt always out of sync on ovirt node

2019-01-18 Thread Jorick Astrego
Hi,

We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7,
4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on 4.3rc2)
the ovirtmgmt interface is always out of sync.

Tried synching the network and refresh capabilities. I also tried
removing ovirtmgmt from the interface and adding it to a bond, then I
get this error:

Cannot setup Networks. The following Network definitions on the
Network Interface are different than those on the Logical Network.
Please synchronize the Network Interface before editing network
ovirtmgmt. The non-synchronized values are: ${OUTAVERAGELINKSHARE}
${HOST_OUT_OF_SYNC} - null, ${DC_OUT_OF_SYNC} - 50

I can setup the bond at install so the ovirtmgmt will use it so I can
use the host, but I'm hesitant to do this in production as I cannot
change the interface anymore.

Regards,

Jorick Astrego





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/S4SMWRA4DDA5P3DO5NAKPRUWK42QZVGJ/


[ovirt-users] ovirt node ng 4.3.0 rc1 upgrade fails

2019-01-11 Thread Jorick Astrego
 Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre)
   Requires: openscap
Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre)
   Requires: pam_pkcs11
Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre)
   Requires: aide
    Error: Package: 10:qemu-kvm-ev-2.12.0-18.el7_6.1.1.x86_64
(ovirt-4.3-centos-qemu-ev)
   Requires: libepoxy.so.0()(64bit)
Error: Package: ovirt-host-4.3.0-1.el7.x86_64 (ovirt-4.3-pre)
   Requires: scap-security-guide





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: 
https://www.ovirt.org/community/about/community-guidelines/
List Archives: 
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2PZ5DUKSTBFI3KT4EHKYBOZZUBFJ6PYP/


Re: [ovirt-users] Ovirt 4.0 and EL 7.4

2017-10-12 Thread Jorick Astrego
Fixed it by downgrading libvirt, I had the libvirt latest repo 
"http://mirror.centos.org/centos-7/7.3.1611/virt/x86_64/libvirt-latest/; 
configured on our Katello

Working packages:

libvirt-daemon-driver-network-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-config-nwfilter-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-nodedev-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-nwfilter-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-qemu-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-lxc-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-interface-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-secret-2.0.0-10.el7_3.9.x86_64
libvirt-lock-sanlock-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-kvm-2.0.0-10.el7_3.9.x86_64
libvirt-client-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-driver-storage-2.0.0-10.el7_3.9.x86_64
libvirt-daemon-config-network-2.0.0-10.el7_3.9.x86_64
libvirt-2.0.0-10.el7_3.9.x86_64
libvirt-python-2.0.0-2.el7.x86_64

On 10/10/2017 07:41 PM, Jorick Astrego wrote:
>
> Hi,
>
> I've redeployed a node with 7.3 to fix this issue but got the same 
> errors with ovirt 4.0.
>
> MainThread::DEBUG::2017-10-10
> 18:30:30,945::upgrade::90::upgrade::(apply_upgrade) Running
> upgrade upgrade-unified-persistence
> MainThread::DEBUG::2017-10-10
> 18:30:30,951::libvirtconnection::160::root::(get) trying to
> connect libvirt
> MainThread::ERROR::2017-10-10
> 18:30:41,125::upgrade::94::upgrade::(apply_upgrade) Failed to run
> upgrade-unified-persistence
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/vdsm/tool/upgrade.py",
> line 92, in apply_upgrade
> upgrade.run(ns, args)
>   File
> "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py",
> line 195, in run
> run()
>   File
> "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py",
> line 46, in run
> networks, bondings = _getNetInfo()
>   File
> "/usr/lib/python2.7/site-packages/vdsm/tool/unified_persistence.py",
> line 132, in _getNetInfo
> netinfo = NetInfo(netswitch.netinfo())
>   File
> "/usr/lib/python2.7/site-packages/vdsm/network/netswitch.py", line
> 298, in netinfo
> _netinfo = netinfo_get(compatibility=compatibility)
>   File
> "/usr/lib/python2.7/site-packages/vdsm/network/netinfo/cache.py",
> line 109, in get
> return _get(vdsmnets)
>   File
> "/usr/lib/python2.7/site-packages/vdsm/network/netinfo/cache.py",
> line 70, in _get
> libvirt_nets = libvirt.networks()
>   File "/usr/lib/python2.7/site-packages/vdsm/network/libvirt.py",
> line 113, in networks
> conn = libvirtconnection.get()
>   File
> "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
> 163, in get
> password)
>   File
> "/usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py", line
> 99, in open_connection
> return utils.retry(libvirtOpen, timeout=10, sleep=0.2)
>   File "/usr/lib/python2.7/site-packages/vdsm/utils.py", line 547,
> in retry
> return func()
>   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 105,
> in openAuth
> if ret is None:raise libvirtError('virConnectOpenAuth() failed')
> libvirtError: authentication failed: authentication failed
>
>
> Oct 10 19:35:55 host1 sasldblistusers2: _sasldb_getkeyhandle has
> failed
>
> Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+:
> 13660: error : virNetSASLSessionListMechanisms:390 : internal
> error: cannot list SASL mechanisms -4 (SASL(-4): no mechanism
> available: Internal Error -4 in server.c near line 1757)
> Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+:
> 13660: error : remoteDispatchAuthSaslInit:3411 : authentication
> failed: authentication failed
> Oct 10 19:36:20 host1 libvirtd: 2017-10-10 17:36:20.002+:
> 13650: error : virNetSocketReadWire:1808 : End of file while
> reading data: Input/output error
> Oct 10 19:36:20 host1 vdsm-tool: libvirt: XML-RPC error :
> authentication failed: authentication failed
> Oct 10 19:36:20 host1 systemd: vdsm-network.service: control
> process exited, code=exited status=1
> Oct 10 19:36:20 host1 systemd: Failed to start Virtual Desktop
> Server Manager network restoration.
> Oct 10 19:36:20 host1 systemd: Dependency failed for Virtual
> Desktop Server Manager.
> Oct 10 19:36:2

Re: [ovirt-users] Ovirt 4.0 and EL 7.4

2017-10-10 Thread Jorick Astrego
river-storage-3.2.0-1.el7.x86_64
libvirt-daemon-driver-secret-3.2.0-1.el7.x86_64
libvirt-daemon-driver-interface-3.2.0-1.el7.x86_64
libvirt-daemon-kvm-3.2.0-1.el7.x86_64
libvirt-libs-3.2.0-1.el7.x86_64
libvirt-daemon-driver-storage-core-3.2.0-1.el7.x86_64
libvirt-daemon-driver-qemu-3.2.0-1.el7.x86_64
libvirt-daemon-config-nwfilter-3.2.0-1.el7.x86_64
libvirt-daemon-driver-storage-disk-3.2.0-1.el7.x86_64
libvirt-daemon-driver-storage-gluster-3.2.0-1.el7.x86_64
libvirt-lock-sanlock-3.2.0-1.el7.x86_64
libvirt-daemon-3.2.0-1.el7.x86_64
libvirt-daemon-driver-nwfilter-3.2.0-1.el7.x86_64

ovirt-imageio-common-0.4.0-1.el7.noarch
ovirt-release40-4.0.6-2.el7.centos.noarch
ovirt-vmconsole-1.0.4-1.el7.centos.noarch
ovirt-imageio-daemon-0.4.0-1.el7.noarch
ovirt-vmconsole-host-1.0.4-1.el7.centos.noarch

Also tried with "mech_list: digest-md5"

cat /etc/sasl2/libvirt.conf |grep mech_list
#mech_list: gssapi
mech_list: digest-md5
#mech_list: scram-sha-1
#mech_list: scram-sha-1 gssapi


On 10/05/2017 01:26 PM, Pavel Gashev wrote:
> Full /etc/sasl2/libvirt.conf:
> mech_list: digest-md5
> sasldb_path: /etc/libvirt/passwd.db
>
> Also note that VDSM has to be patched to work on 7.4 with no issues. oVirt 
> 3.6 and 4.1 have required fixes, but oVirt 4.0 doesn’t.
>
> On 04/10/2017, 18:44, "users-boun...@ovirt.org on behalf of Alan Griffiths" 
> <users-boun...@ovirt.org on behalf of apgriffith...@gmail.com> wrote:
>
>  That didn't seem to make any difference.
>  
>  I can make it work by disabling authentication
>  
>  auth_unix_rw="none"  in /etc/libvirt/libvirtd.conf
>  
>  On 4 October 2017 at 15:05, VONDRA Alain <avon...@unicef.fr> wrote:
>  > Hi,
>  > Did you modify your /etc/sasl2/libvirt.conf, because the update has 
> modify the way to authenticate from md5 to gssapi.
>  >
>  > If not just change this line :
>  > mech_list: gssapi
>  > to
>  > mech_list: digest-md5
>  >
>  > And restart services
>  >
>  > As mentioned in the libvirt.conf file :
>  >
>  > # NB, previously DIGEST-MD5 was set as the default mechanism for
>  > # libvirt. Per RFC 6331 this is vulnerable to many serious security
>  > # flaws and should no longer be used. Thus GSSAPI is now the default.
>  > #
>  > # To use GSSAPI requires that a libvirtd service principal is
>  > # added to the Kerberos server for each host running libvirtd.
>  > # This principal needs to be exported to the keytab file listed below
>  >
>  > Alain
>  >
>  >
>  >
>  > Alain VONDRA
>  >
>  > Chargé d'Exploitation et de Sécurité des Systèmes d'Information
>  > Direction Administrative et Financière
>  > +33 1 44 39 77 76
>  >
>  > UNICEF France
>  > 3 rue Duguay Trouin  75006
>  > PARIS
>  > www.unicef.fr
>  > -Message d'origine-
>  > De : users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] De la 
> part de Alan Griffiths
>  > Envoyé : mercredi 4 octobre 2017 15:50
>  > À : Ovirt Users <users@ovirt.org>
>  > Objet : [ovirt-users] Ovirt 4.0 and EL 7.4
>  >
>  > Hi,
>  >
>  > Is 4.0 supported/known to work on CentOS 7.4?
>  >
>  > I've just tried to upgrade one of the hosts in my lab from 7.3 to 7.4 
> and now vdsm-network fails to start with
>  >
>  > vdsm-tool: libvirt: XML-RPC error : authentication failed: 
> authentication failed
>  >
>  > To even get this far I had to exclude gluster packages as 7.4 
> introduces 3.8 but ovirt 4.0 repo is still on 3.7.
>  >
>  > So, more generally. If I'm on ovirt 4.0, gluster 3.7 and EL 7.3. What 
> is the best ordering for getting to ovirt 4.1 and EL 7.4?
>  >
>  > Thanks,
>  >
>  > Alan
>  > ___
>  > Users mailing list
>  > Users@ovirt.org
>  > http://lists.ovirt.org/mailman/listinfo/users
>  ___
>  Users mailing list
>  Users@ovirt.org
>  http://lists.ovirt.org/mailman/listinfo/users
>  
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] problem installing/upgrading hosts after 3.6 to 4.0 update

2017-10-10 Thread Jorick Astrego
Hi,

After digging through the mailinglist I see more issues with ovirt 4.0 
on Centos 7.4. So I'm now going to try redeploying the nodes with 7.3 
and go from there as I experienced I first have to upgrade to 4.0 before 
upgrading to 4.1.

A bit of a hassle, maybe put a notice to use Centos 7.3 in the upgrade 
guide?

Regards,

Jorick


On 10/10/2017 11:43 AM, Jorick Astrego wrote:
>
> Hi,
>
> It was time to upgrade our ancient ovirt 3.6 to 4.0 (and then to 4.1), 
> but I'm having some issues in our test environment.
>
> After upgrading the engine, I try to reinstall a fresh provisioned 
> Centos 7.4 node but it fails on the vdsm service.
>
> When debugging I see in the log that the step "vdsm-tool configure" fails:
>
> 2017-10-10 10:59:21 DEBUG otopi.context context._executeMethod:128
> Stage closeup METHOD
> otopi.plugins.ovirt_host_deploy.vdsm.packages.Plugin._reconfigure
> 2017-10-10 10:59:21 DEBUG
> otopi.plugins.ovirt_host_deploy.vdsm.packages
> plugin.executeRaw:813 execute: ('/bin/vdsm-tool', 'configure',
> '--force'), executable='None', cwd='None', env=None
> 2017-10-10 10:59:21 DEBUG
> otopi.plugins.ovirt_host_deploy.vdsm.packages
> plugin.executeRaw:863 execute-result: ('/bin/vdsm-tool',
> 'configure', '--force'), rc=1
> 2017-10-10 10:59:21 DEBUG
> otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.execute:921
> execute-output: ('/bin/vdsm-tool', 'configure', '--force') stdout:
> Usage: /bin/vdsm-tool [options]  [arguments]
> Valid options:
>   -h, --help
> Show this help menu.
>   -l, --logfile 
> Redirect logging to file.
>   -v, --verbose
>
> When I run it by hand, there is no action "configure"
>
> vdsm-tool -vvv configure
> Usage: /usr/bin/vdsm-tool [options]  [arguments]
> Valid options:
>   -h, --help
> Show this help menu.
>   -l, --logfile 
> Redirect logging to file.
>   -v, --verbose
> Include warning (and errors) messages in log.
>   -vv, --vverbose
> Include information (and above) messages in log.
>   -vvv, --vvverbose
> Include debug (and above) messages in log.
>   -a, --append
>
> There is also no "vdsm-tool validate-config" command
>
>
> rpm -qa|grep vdsm
>
> vdsm-jsonrpc-4.18.21-1.el7.centos.noarch
> vdsm-cli-4.18.21-1.el7.centos.noarch
> vdsm-4.18.21-1.el7.centos.x86_64
> vdsm-api-4.18.21-1.el7.centos.noarch
> vdsm-infra-4.18.21-1.el7.centos.noarch
> vdsm-python-4.18.21-1.el7.centos.noarch
>
> vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch
>
> vdsm-xmlrpc-4.18.21-1.el7.centos.noarch
>
> vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch
>
> What could be the problem?
>





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] problem installing/upgrading hosts after 3.6 to 4.0 update

2017-10-10 Thread Jorick Astrego
Hi,

It was time to upgrade our ancient ovirt 3.6 to 4.0 (and then to 4.1), 
but I'm having some issues in our test environment.

After upgrading the engine, I try to reinstall a fresh provisioned 
Centos 7.4 node but it fails on the vdsm service.

When debugging I see in the log that the step "vdsm-tool configure" fails:

2017-10-10 10:59:21 DEBUG otopi.context context._executeMethod:128
Stage closeup METHOD
otopi.plugins.ovirt_host_deploy.vdsm.packages.Plugin._reconfigure
2017-10-10 10:59:21 DEBUG
otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.executeRaw:813
execute: ('/bin/vdsm-tool', 'configure', '--force'),
executable='None', cwd='None', env=None
2017-10-10 10:59:21 DEBUG
otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.executeRaw:863
execute-result: ('/bin/vdsm-tool', 'configure', '--force'), rc=1
2017-10-10 10:59:21 DEBUG
otopi.plugins.ovirt_host_deploy.vdsm.packages plugin.execute:921
execute-output: ('/bin/vdsm-tool', 'configure', '--force') stdout:
Usage: /bin/vdsm-tool [options]  [arguments]
Valid options:
   -h, --help
 Show this help menu.
   -l, --logfile 
 Redirect logging to file.
   -v, --verbose

When I run it by hand, there is no action "configure"

vdsm-tool -vvv configure
Usage: /usr/bin/vdsm-tool [options]  [arguments]
Valid options:
   -h, --help
 Show this help menu.
   -l, --logfile 
 Redirect logging to file.
   -v, --verbose
 Include warning (and errors) messages in log.
   -vv, --vverbose
 Include information (and above) messages in log.
   -vvv, --vvverbose
 Include debug (and above) messages in log.
   -a, --append

There is also no "vdsm-tool validate-config" command


rpm -qa|grep vdsm

vdsm-jsonrpc-4.18.21-1.el7.centos.noarch
vdsm-cli-4.18.21-1.el7.centos.noarch
vdsm-4.18.21-1.el7.centos.x86_64
vdsm-api-4.18.21-1.el7.centos.noarch
vdsm-infra-4.18.21-1.el7.centos.noarch
vdsm-python-4.18.21-1.el7.centos.noarch

vdsm-hook-vmfex-dev-4.18.21-1.el7.centos.noarch

vdsm-xmlrpc-4.18.21-1.el7.centos.noarch

vdsm-yajsonrpc-4.18.21-1.el7.centos.noarch

What could be the problem?





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null

2016-11-14 Thread Jorick Astrego
ava:21)
 at

org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeModelProvider.$setSelectedItems(SystemTreeModelProvider.java:108)
 at

org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeModelProvider$1.onSelectionChange(SystemTreeModelProvider.java:59)
 at

com.google.gwt.view.client.SelectionChangeEvent.dispatch(SelectionChangeEvent.java:98)
[gwt-servlet.jar:]
 at
com.google.gwt.event.shared.GwtEvent.dispatch(GwtEvent.java:76)
[gwt-servlet.jar:]
 at

com.google.web.bindery.event.shared.SimpleEventBus.$doFire(SimpleEventBus.java:173)
[gwt-servlet.jar:]
 ... 27 more
Caused by: com.google.gwt.core.client.JavaScriptException: (TypeError)
  __gwt$exception: : a is null
 at

org.ovirt.engine.ui.webadmin.plugin.entity.SystemTreeItemObject.from(SystemTreeItemObject.java:15)
 at

org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeSelectionChangeEvent.$dispatch(SystemTreeSelectionChangeEvent.java:50)
 at

org.ovirt.engine.ui.webadmin.uicommon.model.SystemTreeSelectionChangeEvent.dispatch(SystemTreeSelectionChangeEvent.java:50)
 at
com.google.gwt.event.shared.GwtEvent.dispatch(GwtEvent.java:76)
[gwt-servlet.jar:]
 at

com.google.web.bindery.event.shared.SimpleEventBus.$doFire(SimpleEventBus.java:173)
[gwt-servlet.jar:]
 ... 34 more


On 10/27/2016 11:26 AM, Jorick Astrego wrote:
>
>
>
> On 10/20/2016 03:14 PM, Alexander Wels wrote:
>> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
>>>>> On 18 Oct 2016, at 15:56, Alexander Wels<aw...@redhat.com>  wrote:
>>>>>
>>>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote:
>>>>>> Hi,
>>>>>>
>>>>>> We have ovirt connected to our freeipa domain. Things work fine
>>>>>>
>>>>>> generally, but once in a while I get the following error pop up in the
>> ui:
>>>>>>  Uncaught exception occurred. Please try reloading the page. Details:
>>>>>>  Exception caught: Exception caught: (TypeError) __gwt$exception:
>>>>>>  : Cannot read property 'f' of null
>>>>>>  Please have your administrator check the UI logs
>>>>> Could you install the symbol maps assocaited with the obfuscated code so
>>>>> we
>>>>> can get a readable stack trace. To install the symbol maps please run the
>>>>> following command on the machine running the engine (or VM if it is HE).
>>>>>
>>>>> yum install ovirt-engine-webadmin-portal-debuginfo
>>>>>
>>>>> Please restart the ovirt-engine process with
>>>>>
>>>>> systemctl restart ovirt-engine
>>>>>
>>>>> after you have installed the symbol maps. Then next time you see the
>>>>> message in the UI, the stack trace in the log should be readable and we
>>>>> can help you better determine what is causing the problem.
>>>> right, that’s likely even easier than what I just wrote;-)
>>>>
>>>>>> The log that goes with it:
>>>>>>
>>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785
>>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>>> (default task-21) [] Uncaught exception: :
>>>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught:
>>>>>> Exception caught: (TypeError)
>>>>>>
>>>>>>__gwt$exception: : Cannot read property 'f' of null
>>>>>>
>>>>>>   at
>>>>>>
>>>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at
>>>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at
>>>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>>> Unknown.P2(https://ovir

Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null

2016-10-27 Thread Jorick Astrego


On 10/20/2016 03:14 PM, Alexander Wels wrote:
> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
>>>> On 18 Oct 2016, at 15:56, Alexander Wels <aw...@redhat.com> wrote:
>>>>
>>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote:
>>>>> Hi,
>>>>>
>>>>> We have ovirt connected to our freeipa domain. Things work fine
>>>>>
>>>>> generally, but once in a while I get the following error pop up in the
> ui:
>>>>>  Uncaught exception occurred. Please try reloading the page. Details:
>>>>>  Exception caught: Exception caught: (TypeError) __gwt$exception:
>>>>>  : Cannot read property 'f' of null
>>>>>  Please have your administrator check the UI logs
>>>> Could you install the symbol maps assocaited with the obfuscated code so
>>>> we
>>>> can get a readable stack trace. To install the symbol maps please run the
>>>> following command on the machine running the engine (or VM if it is HE).
>>>>
>>>> yum install ovirt-engine-webadmin-portal-debuginfo
>>>>
>>>> Please restart the ovirt-engine process with
>>>>
>>>> systemctl restart ovirt-engine
>>>>
>>>> after you have installed the symbol maps. Then next time you see the
>>>> message in the UI, the stack trace in the log should be readable and we
>>>> can help you better determine what is causing the problem.
>>> right, that’s likely even easier than what I just wrote;-)
>>>
>>>>> The log that goes with it:
>>>>>
>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785
>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>> (default task-21) [] Uncaught exception: :
>>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught:
>>>>> Exception caught: (TypeError)
>>>>>
>>>>>__gwt$exception: : Cannot read property 'f' of null
>>>>>
>>>>>   at
>>>>>
>>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at
>>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at
>>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>> Unknown.P2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@117) at
>>>>> Unknown.hwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@41) at
>>>>> Unknown.twf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@162) at
>>>>> Unknown.xwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@14293) at
>>>>> Unknown.KVe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@1172) at
>>>>> Unknown.yUe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@33) at
>>>>> Unknown.viy(@53)at Unknown.Piy(@18587) at
>>>>> Unknown.zOr(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@189) at
>>>>> Unknown.$to(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@311) at
>>>>> Unknown.VBo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@2599) at
>>>>> Unknown.mCo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@8942) at
>>>>> Un

Re: [ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null

2016-10-26 Thread Jorick Astrego


On 10/20/2016 03:14 PM, Alexander Wels wrote:
> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
>>>> On 18 Oct 2016, at 15:56, Alexander Wels <aw...@redhat.com> wrote:
>>>>
>>>> On Tuesday, October 18, 2016 3:44:31 PM EDT Jorick Astrego wrote:
>>>>> Hi,
>>>>>
>>>>> We have ovirt connected to our freeipa domain. Things work fine
>>>>>
>>>>> generally, but once in a while I get the following error pop up in the
> ui:
>>>>>  Uncaught exception occurred. Please try reloading the page. Details:
>>>>>  Exception caught: Exception caught: (TypeError) __gwt$exception:
>>>>>  : Cannot read property 'f' of null
>>>>>  Please have your administrator check the UI logs
>>>> Could you install the symbol maps assocaited with the obfuscated code so
>>>> we
>>>> can get a readable stack trace. To install the symbol maps please run the
>>>> following command on the machine running the engine (or VM if it is HE).
>>>>
>>>> yum install ovirt-engine-webadmin-portal-debuginfo
>>>>
>>>> Please restart the ovirt-engine process with
>>>>
>>>> systemctl restart ovirt-engine
>>>>
>>>> after you have installed the symbol maps. Then next time you see the
>>>> message in the UI, the stack trace in the log should be readable and we
>>>> can help you better determine what is causing the problem.
>>> right, that’s likely even easier than what I just wrote;-)
>>>
>>>>> The log that goes with it:
>>>>>
>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>> (default task-21) [] Permutation name: 430985F23DFC1C8BE1C7FDD91EDAA785
>>>>> 2016-10-17 16:31:32,578 ERROR
>>>>> [org.ovirt.engine.ui.frontend.server.gwt.OvirtRemoteLoggingService]
>>>>> (default task-21) [] Uncaught exception: :
>>>>> com.google.gwt.event.shared.UmbrellaException: Exception caught:
>>>>> Exception caught: (TypeError)
>>>>>
>>>>>__gwt$exception: : Cannot read property 'f' of null
>>>>>
>>>>>   at
>>>>>
>>>>> Unknown.ps(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@3837) at
>>>>> Unknown.xs(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@41) at
>>>>> Unknown.C3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>> Unknown.F3(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@19) at
>>>>> Unknown.P2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F
>>>>> 23DF C1C8BE1C7FDD91EDAA785.cache.html@117) at
>>>>> Unknown.hwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@41) at
>>>>> Unknown.twf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@162) at
>>>>> Unknown.xwf(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@14293) at
>>>>> Unknown.KVe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@1172) at
>>>>> Unknown.yUe(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@33) at
>>>>> Unknown.viy(@53)at Unknown.Piy(@18587) at
>>>>> Unknown.zOr(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@189) at
>>>>> Unknown.$to(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@311) at
>>>>> Unknown.VBo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@2599) at
>>>>> Unknown.mCo(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985
>>>>> F23D FC1C8BE1C7FDD91EDAA785.cache.html@8942) at
>>>>> Un

[ovirt-users] Uncaught exception occurred. Cannot read property 'f' of null

2016-10-18 Thread Jorick Astrego
@6015)
 
at 
Unknown.x$(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@4001)
 
at 
Unknown.Z2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@209)
 
at 
Unknown.I2(https://ovirttest.netbulae.test/ovirt-engine/webadmin/430985F23DFC1C8BE1C7FDD91EDAA785.cache.html@28)
 
... 32 more





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] CARP Fails on Bond mode=1

2016-07-18 Thread Jorick Astrego

Hi,

I tried sending this last week, but somehow the list blackholes my 
messages

You could try to add " net.inet.carp.drop_echoed=1" to pfsense in 
/etc/sysctl.conf ?

It is an old fix for VMWare and FreeBSD. I am not able to test it at the 
moment but I can see it's not in the config of the latest version of 
PFSense.

Or maybe better:

https://doc.pfsense.org/index.php/CARP_Configuration_Troubleshooting

Client Port Issues

If a physical CARP cluster is connected to a switch with an ESX box
using multiple ports on the ESX box (lagg group or similar), and
only certain devices/IPs are reachable by the target VM, then the
port group settings in ESX may need adjusted to set the load
balancing for the group to hash based on IP, not the originating
interface.

Side effects of having that set incorrectly include:

  * Traffic only reaching the target VM in promisc mode on its NIC
  * Inability to reach the CARP IP from the target VM when the
"real" IP of the primary firewall is reachable
  * Port forwards or other inbound connections to the target VM work
from some IPs and not others.


So you could try with bonding option "xmit_hash_policy=layer2+3" and see 
if that helps...

Kind regards,
Jorick Astrego


On 07/13/2016 03:59 PM, Matt . wrote:
> As addition: I get the same result using mode=4, only when I use
> multiple VLANS on the interface.
>
> 2016-07-13 15:58 GMT+02:00 Matt .<yamakasi@gmail.com>:
>> Hi Pavel,
>>
>> Thanks for your update. I also saw that the post are both online but I
>> thought the second nic only advertises the mac so the switch does not
>> get confused.
>>
>> The issue might be that i do VRRP, so the bond is connected to two
>> switches, they are not stacked, only trunked as that's what VRRP
>> requires and works well on the side where there is only one VLAN on
>> the Host interface.
>>
>> It just goes wrong on multiple vlans.
>>
>> This is what I see everywhere.
>>
>> Mode 1 (active-backup)
>> This mode places one of the interfaces into a backup state and will
>> only make it active if the link is lost by the active interface. Only
>> one slave in the bond is active at an instance of time. A different
>> slave becomes active only when the active slave fails. This mode
>> provides fault tolerance.
>>
>> It's sure I need to get my traffic back on my sending port, so that is
>> why the arp for the passive port was there I thought.
>>
>> Are there other modes that should be working on VRRP in your understanding ?
>>
>> Thanks a lot,
>>
>> Matt
>>
>>
>>
>> 2016-07-13 15:43 GMT+02:00 Pavel Gashev<p...@acronis.com>:
>>> In mode=1 the active interface sends traffic, but both interfaces accept 
>>> incoming traffic. Hardware switches send broadcast/multicast/unknown 
>>> destination MACs to all ports, including the passive interface. So packet 
>>> sent from the active interface can be received back from the passive 
>>> interface. FreeBSD CARP just would go mad when it receives its own packets.
>>>
>>> I believe if you get Linux implementation, it will work well in the same 
>>> network setup. I use keepalived in oVirt VMs with bonded network, and have 
>>> no issues.
>>>
>>> -Original Message-
>>> From: "Matt ."<yamakasi@gmail.com>
>>> Date: Wednesday 13 July 2016 at 15:54
>>> To: Pavel Gashev<p...@acronis.com>, users<users@ovirt.org>
>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1
>>>
>>> How can it lead into packet duplication when the passive should not be
>>> active and only it's mac-address should be visible on the switch to
>>> prevent confusion on the switch ?
>>>
>>> For a VRRP setup on the switch there is no other option then mode=1 as
>>> far as I know ?
>>>
>>> 2016-07-13 14:50 GMT+02:00 Pavel Gashev<p...@acronis.com>:
>>>> I would say that bonding breaks CARP somehow. In example mode=1 can lead 
>>>> to packet duplication, so pfsense can receive it's own packets. Try 
>>>> firewall in pfsense all incomming packets that have the same source MAC 
>>>> address as pfsense.
>>>>
>>>> -Original Message-
>>>> From: "Matt ."<yamakasi@gmail.com>
>>>> Date: Wednesday 13 July 2016 at 15:29
>>>> To: Pavel Gashev<p...@acronis.com>
>>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1
>>>>
>>>> Hi Pavel,
&

Re: [ovirt-users] CARP Fails on Bond mode=1

2016-07-18 Thread Jorick Astrego

Hi,

You could try to add " net.inet.carp.drop_echoed=1" to pfsense in 
/etc/sysctl.conf ?

It is an old fix for VMWare and FreeBSD. I am not able to test it at the 
moment but I can see it's not in the config of the latest version of 
PFSense.

Or maybe better:

https://doc.pfsense.org/index.php/CARP_Configuration_Troubleshooting


Client Port Issues

If a physical CARP cluster is connected to a switch with an ESX box
using multiple ports on the ESX box (lagg group or similar), and
only certain devices/IPs are reachable by the target VM, then the
port group settings in ESX may need adjusted to set the load
balancing for the group to hash based on IP, not the originating
interface.

Side effects of having that set incorrectly include:

  * Traffic only reaching the target VM in promisc mode on its NIC
  * Inability to reach the CARP IP from the target VM when the
"real" IP of the primary firewall is reachable
  * Port forwards or other inbound connections to the target VM work
from some IPs and not others.


So you could try with bonding option "xmit_hash_policy=layer2+3" and see 
if that helps...

Kind regards,
Jorick Astrego


On 07/13/2016 03:59 PM, Matt . wrote:
> As addition: I get the same result using mode=4, only when I use
> multiple VLANS on the interface.
>
> 2016-07-13 15:58 GMT+02:00 Matt .<yamakasi@gmail.com>:
>> Hi Pavel,
>>
>> Thanks for your update. I also saw that the post are both online but I
>> thought the second nic only advertises the mac so the switch does not
>> get confused.
>>
>> The issue might be that i do VRRP, so the bond is connected to two
>> switches, they are not stacked, only trunked as that's what VRRP
>> requires and works well on the side where there is only one VLAN on
>> the Host interface.
>>
>> It just goes wrong on multiple vlans.
>>
>> This is what I see everywhere.
>>
>> Mode 1 (active-backup)
>> This mode places one of the interfaces into a backup state and will
>> only make it active if the link is lost by the active interface. Only
>> one slave in the bond is active at an instance of time. A different
>> slave becomes active only when the active slave fails. This mode
>> provides fault tolerance.
>>
>> It's sure I need to get my traffic back on my sending port, so that is
>> why the arp for the passive port was there I thought.
>>
>> Are there other modes that should be working on VRRP in your understanding ?
>>
>> Thanks a lot,
>>
>> Matt
>>
>>
>>
>> 2016-07-13 15:43 GMT+02:00 Pavel Gashev<p...@acronis.com>:
>>> In mode=1 the active interface sends traffic, but both interfaces accept 
>>> incoming traffic. Hardware switches send broadcast/multicast/unknown 
>>> destination MACs to all ports, including the passive interface. So packet 
>>> sent from the active interface can be received back from the passive 
>>> interface. FreeBSD CARP just would go mad when it receives its own packets.
>>>
>>> I believe if you get Linux implementation, it will work well in the same 
>>> network setup. I use keepalived in oVirt VMs with bonded network, and have 
>>> no issues.
>>>
>>> -Original Message-
>>> From: "Matt ."<yamakasi@gmail.com>
>>> Date: Wednesday 13 July 2016 at 15:54
>>> To: Pavel Gashev<p...@acronis.com>, users<users@ovirt.org>
>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1
>>>
>>> How can it lead into packet duplication when the passive should not be
>>> active and only it's mac-address should be visible on the switch to
>>> prevent confusion on the switch ?
>>>
>>> For a VRRP setup on the switch there is no other option then mode=1 as
>>> far as I know ?
>>>
>>> 2016-07-13 14:50 GMT+02:00 Pavel Gashev<p...@acronis.com>:
>>>> I would say that bonding breaks CARP somehow. In example mode=1 can lead 
>>>> to packet duplication, so pfsense can receive it's own packets. Try 
>>>> firewall in pfsense all incomming packets that have the same source MAC 
>>>> address as pfsense.
>>>>
>>>> -Original Message-
>>>> From: "Matt ."<yamakasi@gmail.com>
>>>> Date: Wednesday 13 July 2016 at 15:29
>>>> To: Pavel Gashev<p...@acronis.com>
>>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1
>>>>
>>>> Hi Pavel,
>>>>
>>>> No it's Pfsense, so FreeBSD.
>>>>
>&g

Re: [ovirt-users] CARP Fails on Bond mode=1

2016-07-13 Thread Jorick Astrego
;> 2016-07-13 13:59 GMT+02:00 Pavel Gashev <p...@acronis.com>:
>>>>> Matt,
>>>>>
>>>>> How is CARP implemented? Is it OpenBSD?
>>>>>
>>>>> -Original Message-
>>>>> From: <users-boun...@ovirt.org> on behalf of "Matt ." 
>>>>> <yamakasi@gmail.com>
>>>>> Date: Wednesday 13 July 2016 at 12:42
>>>>> Cc: users <users@ovirt.org>
>>>>> Subject: Re: [ovirt-users] CARP Fails on Bond mode=1
>>>>>
>>>>> Hi Pavel,
>>>>>
>>>>> This is done and used without the Bond before.
>>>>>
>>>>> Now I applied a bond it goes wrong and I'm searching but can't find a
>>>>> thing about it.
>>>>>
>>>>>
>>>>>
>>>>> 2016-07-13 11:03 GMT+02:00 Pavel Gashev <p...@acronis.com>:
>>>>>> Matt,
>>>>>>
>>>>>> In order to use CARP/VRRP in a VM you have to disable MAC spoofing 
>>>>>> prevention.
>>>>>> http://lists.ovirt.org/pipermail/users/2015-May/032839.html
>>>>>>
>>>>>> -Original Message-
>>>>>> From: <users-boun...@ovirt.org> on behalf of "Matt ." 
>>>>>> <yamakasi@gmail.com>
>>>>>> Date: Tuesday 12 July 2016 at 21:58
>>>>>> To: users <users@ovirt.org>
>>>>>> Subject: [ovirt-users] CARP Fails on Bond mode=1
>>>>>>
>>>>>> Hi guys,
>>>>>>
>>>>>> I have been testing bonding with a vm connected to the network on this
>>>>>> bond mode=1 (vlans on top of it) where the vm uses a carp IP for
>>>>>> failover.
>>>>>>
>>>>>> It seems that when the VM which holds the Carp IP and so is Master you
>>>>>> can ping both IP's, so interface IP and Carp IP, but you cannot
>>>>>> throw/route any traffic over it.
>>>>>>
>>>>>> You can route traffic over the interface IP of the Carp Slave.
>>>>>>
>>>>>> Is this known or just not possible ?
>>>>>>
>>>>>> I hope it's a "bug" :)
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Matt
>>>>>> ___
>>>>>> Users mailing list
>>>>>> Users@ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>> ___
>>>>> Users mailing list
>>>>> Users@ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] engine gives JBAS015011 java.lang.NullPointerException

2016-05-09 Thread Jorick Astrego
Hi,

Fixed it yesterday, there were some directories like 
/usr/share/ovirt-engine that came from the restore messing things up. I 
think the issue was that the original deployement was 3.5.5 and I now 
installed 3.5.6.2.

Thanks for the assistance as it pointed me in the right way!

Kind regards,

Jorick

On 05/06/2016 10:02 AM, Juan Hernández wrote:
> On 05/06/2016 07:58 AM, Jorick Astrego wrote:
>> Hi,
>>
>> One of our older ovirt engine 3.5.5 (CentOS 7) machines had a raid
>> controller faillure and no recent ovirt-engine backup.
>>
>> So I recovered the files + database and reinstalled with
>> ovirt-engine-3.5.6.2-1. But I can't get it to work.
>>
>> engine-setup runs fine but in the server.log I keep getting these and
>> the webinterface is blank.
>>
> The /var/liv/ovirt-engine/jboss_runtime directory doesn't contain any
> persistent data, and it will be the engine during startup if it doesn't
> exist. So I'd suggest you remove it completely (with the engine stopped):
>
># rm -rf /var/lib/ovirt-engine/jboss_runtime
>
> For this to work the "ovirt" user needs permission to write to
> /var/lib/ovirt-engine, make sure that directory is owned by user "ovirt"
> and group "ovirt", and that permissions are u=rwx,g=rx,o=r-x.
>
> However, if you lost permissions in other directories you will probably
> have similar problems once this is solved.
>
>>  2016-05-05 17:24:43,431 INFO  [org.apache.coyote.ajp.AjpProtocol]
>>  (MSC service thread 1-4) Starting Coyote AJP/1.3 on ajp--127.0.0.1-8702
>>  2016-05-05 17:24:43,493 INFO  [org.jboss.as.remoting] (MSC service
>>  thread 1-2) JBAS017100: Listening on /127.0.0.1:8703
>>  2016-05-05 17:24:43,704 INFO  [org.jboss.as.remoting] (MSC service
>>  thread 1-2) JBAS017100: Listening on /127.0.0.1:8706
>>  2016-05-05 17:24:43,720 INFO
>>  [org.jboss.as.server.deployment.scanner] (MSC service thread 1-1)
>>  JBAS015012: Started FileSystemDeploymentService for directory
>>  /var/lib/ovirt-engine/jboss_runtime/deployments
>>  2016-05-05 17:24:43,893 INFO
>>  [org.jboss.as.connector.subsystems.datasources] (MSC service thread
>>  1-3) JBAS010400: Bound data source [java:/ENGINEDataSource]
>>  2016-05-05 17:24:43,899 ERROR
>>  [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads
>>  - 1) JBAS015011: Scan of
>>  /var/lib/ovirt-engine/jboss_runtime/deployments threw Exception:
>>  java.lang.NullPointerException
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scanDirectory(FileSystemDeploymentService.java:525)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scan(FileSystemDeploymentService.java:336)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  
>> org.jboss.as.server.deployment.scanner.FileSystemDeploymentService$DeploymentScanRunnable.run(FileSystemDeploymentService.java:149)
>>  [jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
>>  at
>>  java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
>>  [rt.jar:1.7.0_101]
>>  at
>>  java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
>>  [rt.jar:1.7.0_101]
>>  at
>>  
>> java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:178)
>>  [rt.jar:1.7.0_101]
>>  at
>>  
>&

[ovirt-users] engine gives JBAS015011 java.lang.NullPointerException

2016-05-06 Thread Jorick Astrego
Hi,

One of our older ovirt engine 3.5.5 (CentOS 7) machines had a raid 
controller faillure and no recent ovirt-engine backup.

So I recovered the files + database and reinstalled with 
ovirt-engine-3.5.6.2-1. But I can't get it to work.

engine-setup runs fine but in the server.log I keep getting these and 
the webinterface is blank.

2016-05-05 17:24:43,431 INFO [org.apache.coyote.ajp.AjpProtocol]
(MSC service thread 1-4) Starting Coyote AJP/1.3 on ajp--127.0.0.1-8702
2016-05-05 17:24:43,493 INFO  [org.jboss.as.remoting] (MSC service
thread 1-2) JBAS017100: Listening on /127.0.0.1:8703
2016-05-05 17:24:43,704 INFO  [org.jboss.as.remoting] (MSC service
thread 1-2) JBAS017100: Listening on /127.0.0.1:8706
2016-05-05 17:24:43,720 INFO
[org.jboss.as.server.deployment.scanner] (MSC service thread 1-1)
JBAS015012: Started FileSystemDeploymentService for directory
/var/lib/ovirt-engine/jboss_runtime/deployments
2016-05-05 17:24:43,893 INFO
[org.jboss.as.connector.subsystems.datasources] (MSC service thread
1-3) JBAS010400: Bound data source [java:/ENGINEDataSource]
2016-05-05 17:24:43,899 ERROR
[org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads
- 1) JBAS015011: Scan of
/var/lib/ovirt-engine/jboss_runtime/deployments threw Exception:
java.lang.NullPointerException
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scanDirectory(FileSystemDeploymentService.java:525)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.scan(FileSystemDeploymentService.java:336)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService$DeploymentScanRunnable.run(FileSystemDeploymentService.java:149)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
[rt.jar:1.7.0_101]
 at
java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
[rt.jar:1.7.0_101]
 at

java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$301(ScheduledThreadPoolExecutor.java:178)
[rt.jar:1.7.0_101]
 at

java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:293)
[rt.jar:1.7.0_101]
 at

java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
[rt.jar:1.7.0_101]
 at

java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
[rt.jar:1.7.0_101]
 at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_101]
 at org.jboss.threads.JBossThread.run(JBossThread.java:122)
[jboss-threads-2.0.0.GA.jar:2.0.0.GA]

2016-05-05 17:24:44,141 INFO  [org.jboss.as] (Controller Boot
Thread) JBAS015874: JBoss AS 7.1.1.Final "Brontes" started in 3718ms
- Started 136 of 160 services (23 services are passive or on-demand)
2016-05-05 17:24:48,918 ERROR
[org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads
- 1) JBAS015011: Scan of
/var/lib/ovirt-engine/jboss_runtime/deployments threw Exception:
java.lang.NullPointerException
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:682)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]
 at

org.jboss.as.server.deployment.scanner.FileSystemDeploymentService.getDeploymentTimestamp(FileSystemDeploymentService.java:683)
[jboss-as-deployment-scanner-7.1.1.Final.jar:7.1.1.Final]

Anyone seen these errors before? I have all the files/directories of the 
old drive but all the permissions are gone :-(







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A  

Re: [ovirt-users] api access with poweruser role

2015-11-02 Thread Jorick Astrego


On 10/29/2015 03:58 PM, Ondra Machacek wrote:
>
>
> On 10/29/2015 03:56 PM, Ondra Machacek wrote:
>>
>>
>> On 10/28/2015 11:29 AM, Jorick Astrego wrote:
>>>
>>>
>>> On 10/26/2015 03:14 PM, Jorick Astrego wrote:
>>>>
>>>>
>>>> On 10/26/2015 02:57 PM, Ondra Machacek wrote:
>>>>>
>>>>>
>>>>> On 10/26/2015 02:53 PM, Jorick Astrego wrote:
>>>>>> Hi,
>>>>>>
>>>>>> Currently I'm trying to add an ovirt compute resource in forman
>>>>>> that is limited to the VM's of the user.
>>>>>>
>>>>>> When I give this user the PowerUser role, I cannot access the api:
>>>>>>
>>>>>> query execution failed due to insufficient permissions
>>>>>>
>>>>>
>>>>> Are you sending header 'Filter: true' with the request ?
>>>>> If your user is not admin(PowerUserRole is not admin role),
>>>>> you have to use this header.
>>>>>
>>>>>
>>>>
>>>
>>> Hmm, not much response on foreman-users..
>>>
>>> I checked the code of fog in my foreman install (
>>> /opt/rh/ruby193/root/usr/share/gems/gems/fog-1.32.0/lib/fog/ovirt/compute.rb
>>> ) and it appears to have the correct option merged:
>>>
>>>   connection_opts[:filtered_api]  =
>>> options[:ovirt_filtered_api]
>>>
>>>
>>> But I don't know what url the foreman actually generates, is there
>>> any way to capture the login string? I tried setting some DEBUG
>>> logging but don't get the output I'm looking for.
>>>
>>> 
>>> 
>>> 
>>> >> category="org.ovirt.engine.core.bll.aaa.LoginUserCommand">
>>> 
>>> 
>>> >> 
>>> category="org.ovirt.engine.api.restapi.resource.AbstractBackendResource">
>>> 
>>> 
>>>
>>>
>>
>> It depends what url foreman client access. But you can set:
>>
>> 
>> 
>> 
>>
>> And then you will see what commands was queried with or without the
>> filtered API.
>>
>> 2015-10-29 15:45:45,436 TRACE
>> [org.ovirt.engine.core.bll.GetAllVmsQuery] (ajp-/127.0.0.1:8702-1) []
>> START, GetAllVmsQuery(VdcQueryParametersBase:{refresh='true',
>> filtered='true'}), log id: 53b3c8b9
>>
>> ^^ This is example of running 'Filter: true' on /api/vms (you can see
>> filtered='true').
>


It appears the filtered tag doesn't get set. I'll continue on the
foreman list from now.

2015-11-02 10:29:17,126 DEBUG
[org.ovirt.engine.core.bll.aaa.LoginUserCommand]
(ajp--127.0.0.1-8702-9) Found permission
fbcb73a0-226e-49d4-9e7a-01c665127a07 for user when running
LoginUser, on Bottom with id bbb0----123456789bbb
2015-11-02 10:29:17,128 DEBUG
[org.ovirt.engine.core.bll.aaa.LoginBaseCommand]
(ajp--127.0.0.1-8702-9) Checking if user testuser is an admin,
result false
2015-11-02 10:29:17,129 INFO 
[org.ovirt.engine.core.bll.aaa.LoginUserCommand]
(ajp--127.0.0.1-8702-9) Running command: LoginUserCommand(LoginName
= null, ProfileName = netbulae.test, AuthRecord =
{Extkey[name=AAA_AUTHN_AUTH_RECORD_PRINCIPAL;type=class

java.lang.String;uuid=AAA_AUTHN_AUTH_RECORD_PRINCIPAL[c3498f07-11fe-464c-958c-8bd7490b119a];]=testuser},
IsAdmin = false, ActionType = LoginUser, AuthType = CREDENTIALS)
internal: false.
2015-11-02 10:29:17,132 TRACE
[org.ovirt.engine.core.bll.GetConfigurationValueQuery]
(ajp--127.0.0.1-8702-9) START, GetConfigurationValueQuery(version:
general, configuration value: ApplicationMode, refresh: false,
filtered: false), log id: 438b23b5
2015-11-02 10:29:17,134 TRACE
[org.ovirt.engine.core.bll.GetConfigurationValueQuery]
(ajp--127.0.0.1-8702-9) FINISH, GetConfigurationValueQuery, log id:
438b23b5
2015-11-02 10:29:17,134 TRACE
[org.ovirt.engine.core.bll.aaa.GetValueBySessionQuery]
(ajp--127.0.0.1-8702-9) START, GetValueBySessionQuery(refresh:
false, *filtered: false), *log id: 63d562b7
2015-11-02 10:29:17,135 TRACE
[org.ovirt.engine.core.bll.aaa.GetValueBySessionQuery]
(ajp--127.0.0.1-8702-9) FINISH, GetValueBySessionQuery, log id: 63d562b7
2015-11-02 10:29:17,136 TRACE
[org.ovirt.engine.core.bll.SearchQuery] (ajp--127.0.0.1-8702-9)
START, SearchQuery(search type: StoragePool, search pattern:
[Datacenter : ], case sensitive: true [from: 0, max: -1] refresh:
true, filtered: false), log id: 4e440f95
2015-11-02 10:29:17,138 ERROR
[org.ovirt.engine.core.bll.SearchQuery] (ajp--127.0.0.1-8702-9)
Query execution failed due to insufficient permissions.

I've updated http://projects.theforeman.org/issues/6835





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] api access with poweruser role

2015-10-28 Thread Jorick Astrego


On 10/26/2015 03:14 PM, Jorick Astrego wrote:
>
>
> On 10/26/2015 02:57 PM, Ondra Machacek wrote:
>>
>>
>> On 10/26/2015 02:53 PM, Jorick Astrego wrote:
>>> Hi,
>>>
>>> Currently I'm trying to add an ovirt compute resource in forman that
>>> is limited to the VM's of the user.
>>>
>>> When I give this user the PowerUser role, I cannot access the api:
>>>
>>> query execution failed due to insufficient permissions
>>>
>>
>> Are you sending header 'Filter: true' with the request ?
>> If your user is not admin(PowerUserRole is not admin role),
>> you have to use this header.
>>
>>
>

Hmm, not much response on foreman-users..

I checked the code of fog in my foreman install (
/opt/rh/ruby193/root/usr/share/gems/gems/fog-1.32.0/lib/fog/ovirt/compute.rb
) and it appears to have the correct option merged:

  connection_opts[:filtered_api]  = options[:ovirt_filtered_api]


But I don't know what url the foreman actually generates, is there any
way to capture the login string? I tried setting some DEBUG logging but
don't get the output I'm looking for.




    













Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] api access with poweruser role

2015-10-26 Thread Jorick Astrego


On 10/26/2015 02:57 PM, Ondra Machacek wrote:
>
>
> On 10/26/2015 02:53 PM, Jorick Astrego wrote:
>> Hi,
>>
>> Currently I'm trying to add an ovirt compute resource in forman that
>> is limited to the VM's of the user.
>>
>> When I give this user the PowerUser role, I cannot access the api:
>>
>> query execution failed due to insufficient permissions
>>
>
> Are you sending header 'Filter: true' with the request ?
> If your user is not admin(PowerUserRole is not admin role),
> you have to use this header.
>
>

As I'm using forman, I have no control over this. There used to be a
bug, but it should have been patched months ago:

http://projects.theforeman.org/issues/6835


-



*Description*

Cloned from https://bugzilla.redhat.com/show_bug.cgi?id=1123676
Description of problem:
When trying to create a rhev compute resource with non-admin RHEV
user, the following error occurs:

"query execution failed due to insufficient permissions."

The reason for this is the RHEV needs to be called with 'Filter:
true' headers
for the api to work correctly with non-admin user.

The rbovirt client library supports to specify the filtered_api
option, but fog and foreman don't have a support for that


https://github.com/abenari/rbovirt/blob/a7c277e3fc5698e55e95a9432997b1a9c8d486ae/lib/rbovirt.rb#L54-L55


  History


#1 <http://projects.theforeman.org/issues/6835#note-1>
Updated by Dominic Cleal
<http://projects.theforeman.org/users/3536> about 1 year

<http://projects.theforeman.org/projects/foreman/activity?from=2014-07-30>
ago

  * *Category* set to /Compute resources - oVirt/
  * *Assigned To* deleted (/Dominic Cleal/)


#2 <http://projects.theforeman.org/issues/6835#note-2>
Updated by Tom Caspy
<http://projects.theforeman.org/users/5429> 10 months

<http://projects.theforeman.org/projects/foreman/activity?from=2015-01-13>
ago

added a pull request to the fog gem:
https://github.com/fog/fog/pull/3393


#3 <http://projects.theforeman.org/issues/6835#note-3>
Updated by Ohad Levy
<http://projects.theforeman.org/users/3> 5 months

<http://projects.theforeman.org/projects/foreman/activity?from=2015-06-09>
ago

Fog PR has been merged a while ago.

The version of rbovirt we have is:

ruby193-rubygem-rbovirt-0.0.35-1.el6.noarch

Kind regards,

Jorick

>>
>> When I give this user the SuperUser role, I can access the api. But I
>> can see all the VM's of all users.
>>
>> How can I grant api access so the user can deploy through forman
>> without giving access to all the vm's in our oVirt environment?
>>
>> Kind regards,
>>
>> Jorick
>>
>>
>>
>>
>> Met vriendelijke groet, With kind regards,
>>
>> Jorick Astrego
>> *
>> Netbulae Virtualization Experts *
>> 
>> Tel: 053 20 30 270   i...@netbulae.euStaalsteden 4-3AKvK 
>> 08198180
>> Fax: 053 20 30 271   www.netbulae.eu 7547 TA EnschedeBTW
>> NL821234584B01
>>
>>
>> 
>>
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] api access with poweruser role

2015-10-26 Thread Jorick Astrego
Hi,

Currently I'm trying to add an ovirt compute resource in forman that is
limited to the VM's of the user.

When I give this user the PowerUser role, I cannot access the api:

query execution failed due to insufficient permissions

When I give this user the SuperUser role, I can access the api. But I
can see all the VM's of all users.

How can I grant api access so the user can deploy through forman without
giving access to all the vm's in our oVirt environment?

Kind regards,

Jorick




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] unable to assign quota to users/groups

2015-09-28 Thread Jorick Astrego
Hi,

Found it. The quota tab is only visible when you select the datacenter.

It's sometimes confusing that tabs appear/disappear acording to context :-&

I'll close the BZ as it's a user error

Thanks anyway!

Kind regards,

Jorick

On 09/28/2015 02:42 PM, Alexander Wels wrote:
> On Monday, September 28, 2015 11:23:33 AM Jorick Astrego wrote:
>> I missed the reply, so I'm a bit late responding ;-)
>>
>> The screenshot from RHEV has a "Quota" and "vNic templates" tab after
>> "Templates". Ovirt has the tabs "Volumes" and "Users" after "Templates".
>>
>> So there are some differences.
>>
>>
>>
>> Created BZ:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1264780
>>
>> Kind regards,
>>
>> Jorick
>>
> Question, did you create a quota first before trying to assign it. IIRC the 
> quota tab is hidden if there is no quota to assign.
>
>> On 08/27/2015 02:10 PM, Artyom Lukianov wrote:
>>> Doron, like I said I not encountered such behavior in 3.5.
>>> Thanks
>>>
>>> - Original Message -
>>> From: "Doron Fediuck" <dfedi...@redhat.com>
>>> To: "Artyom Lukianov" <aluki...@redhat.com>
>>> Cc: "Jorick Astrego" <j.astr...@netbulae.eu>, "users" <users@ovirt.org>
>>> Sent: Thursday, August 27, 2015 2:48:41 PM
>>> Subject: Re: [ovirt-users] unable to assign quota to users/groups
>>>
>>> Please open a BZ and attach a screenshot.
>>>
>>> Thanks,
>>> Doron
>>>
>>> On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov <aluki...@redhat.com>
>>>
>>> wrote:
>>>> Not in 3.5, in 3.6 we have REST API for quota, but it's really strange,
>>>> can you attach screenshot how looks detail panel, when you click on
>>>> specific quota.
>>>> Thanks
>>>>
>>>> - Original Message -
>>>> From: "Jorick Astrego" <j.astr...@netbulae.eu>
>>>> To: users@ovirt.org
>>>> Sent: Tuesday, August 25, 2015 1:06:34 PM
>>>> Subject: [ovirt-users] unable to assign quota to users/groups
>>>>
>>>> In 3.5.3, I'm trying to set a quota for each user. But I cannot find how
>>>> to do it anymore as the Quota consumers tab is not there in my 3.5.3
>>>> install.
>>>>
>>>>
>>>> 17.8. Using Quota to Limit Resources by User
>>>> Summary
>>>> This procedure describes how to use quotas to limit the resources a user
>>>> has access to.
>>>> ⁠
>>>> Procedure 17.5. Assigning a User to a Quota
>>>>
>>>> In the tree, click the Data Center with the quota you want to associate
>>>> with a User.
>>>> Click the Quota tab in the navigation pane.
>>>> Select the target quota in the list in the navigation pane.
>>>> Click the Consumers tab in the details pane.
>>>> Click Add at the top of the details pane.
>>>> In the Search field, type the name of the user you want to associate with
>>>> the quota.
>>>> Click GO.
>>>> Select the check box at the left side of the row containing the name of
>>>> the target user.
>>>> Click OK in the bottom right of the Assign Users and Groups to Quota
>>>> window.
>>>> Result
>>>> After a short time, the user will appear in the Consumers tab of the
>>>> details pane.
>>>>
>>>> What happened to the details pane? Is there another way to assign a quota
>>>> to users/groups?
>>>>
>>>>
>>>>
>>>> Met vriendelijke groet, With kind regards,
>>>>
>>>> Jorick Astrego
>>>>
>>>> Netbulae Virtualization Experts
>>>>
>>>> Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
>>>> KvK 08198180
>>>>
>>>> Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
>>>>   
>>>>   BTW NL821234584B01
>>>>
>>>> ___
>>>> Users mailing list
>>>> Users@ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>> ___
>>>> Users mailing list
>>>> Users@ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>> Met vriendelijke groet, With kind regards,
>>
>> Jorick Astrego
>>
>> Netbulae Virtualization Experts
>>
>> 
>>
>>  Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
>> KvK 08198180
>>  Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
>> BTW 
> NL821234584B01
>> 





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] unable to assign quota to users/groups

2015-09-28 Thread Jorick Astrego
I missed the reply, so I'm a bit late responding ;-)

The screenshot from RHEV has a "Quota" and "vNic templates" tab after
"Templates". Ovirt has the tabs "Volumes" and "Users" after "Templates".

So there are some differences.



Created BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1264780

Kind regards,

Jorick



On 08/27/2015 02:10 PM, Artyom Lukianov wrote:
> Doron, like I said I not encountered such behavior in 3.5.
> Thanks
>
> - Original Message -
> From: "Doron Fediuck" <dfedi...@redhat.com>
> To: "Artyom Lukianov" <aluki...@redhat.com>
> Cc: "Jorick Astrego" <j.astr...@netbulae.eu>, "users" <users@ovirt.org>
> Sent: Thursday, August 27, 2015 2:48:41 PM
> Subject: Re: [ovirt-users] unable to assign quota to users/groups
>
> Please open a BZ and attach a screenshot.
>
> Thanks,
> Doron
>
> On Tue, Aug 25, 2015 at 5:45 PM, Artyom Lukianov <aluki...@redhat.com>
> wrote:
>
>> Not in 3.5, in 3.6 we have REST API for quota, but it's really strange,
>> can you attach screenshot how looks detail panel, when you click on
>> specific quota.
>> Thanks
>>
>> - Original Message -
>> From: "Jorick Astrego" <j.astr...@netbulae.eu>
>> To: users@ovirt.org
>> Sent: Tuesday, August 25, 2015 1:06:34 PM
>> Subject: [ovirt-users] unable to assign quota to users/groups
>>
>> In 3.5.3, I'm trying to set a quota for each user. But I cannot find how
>> to do it anymore as the Quota consumers tab is not there in my 3.5.3
>> install.
>>
>>
>> 17.8. Using Quota to Limit Resources by User
>> Summary
>> This procedure describes how to use quotas to limit the resources a user
>> has access to.
>> ⁠
>> Procedure 17.5. Assigning a User to a Quota
>>
>> In the tree, click the Data Center with the quota you want to associate
>> with a User.
>> Click the Quota tab in the navigation pane.
>> Select the target quota in the list in the navigation pane.
>> Click the Consumers tab in the details pane.
>> Click Add at the top of the details pane.
>> In the Search field, type the name of the user you want to associate with
>> the quota.
>> Click GO.
>> Select the check box at the left side of the row containing the name of
>> the target user.
>> Click OK in the bottom right of the Assign Users and Groups to Quota
>> window.
>> Result
>> After a short time, the user will appear in the Consumers tab of the
>> details pane.
>>
>> What happened to the details pane? Is there another way to assign a quota
>> to users/groups?
>>
>>
>>
>> Met vriendelijke groet, With kind regards,
>>
>> Jorick Astrego
>>
>> Netbulae Virtualization Experts
>>
>> Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
>> KvK 08198180
>> Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
>>   BTW NL821234584B01
>>
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
> >





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] why replica 3

2015-09-09 Thread Jorick Astrego


On 09/09/2015 10:14 AM, Richard Neuboeck wrote:
> On 04.09.15 10:02, Simone Tiraboschi wrote:
>> Is there a reason why it has to be exactly replica 3?
>>
>>
>> To have a valid quorum having the system being able to decide witch is
>> the right and safe copy avoiding an issue called split brain.
>> Under certain circumstances/issues (network issue, hosts down or
>> whatever could happen) the data on different replica could diverge: if
>> you have two and just two different hosts that claim each other
> that its
>> copy is the right one there is no way to automatically take the right
>> decision. Having three hosts and setting the quorum according to that
>> solves/mitigates the issue.
>
> Thanks for the explanation. I do understand the problem but since
> I'm somewhat limited in my hardware options is there a way to
> override this requirement? Meaning if I change the checks for
> replica 3 in the installation scripts does something else fail on
> the way?
>
> In my case coherence checks would come from outside the storage and
> vm host setup and fencing would be applied appropriately.
>
> I would very much appreciate it if the particulars of the storage
> setup could be either selected from a list of possibilities or be
> ignored and just a warning be issued that this setup is not recommended.
>
> Thanks!
> Richard
>
>
As a side question, in Glusterfs 3.7 there is an "AFR arbiter volume"
(http://gluster.readthedocs.org/en/release-3.7.0-1/Features/afr-arbiter-volumes/)
that will only contain the metadata.

Will ovirt support this in 3.6?

Kind regards,

Jorick Astrego




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] unable to assign quota to users/groups

2015-08-25 Thread Jorick Astrego
In 3.5.3, I'm trying to set a quota for each user. But I cannot find how
to do it anymore as the Quota consumers tab is not there in my 3.5.3
install.

17.8. Using Quota to Limit Resources by User
Summary
This procedure describes how to use quotas to limit the resources a
user has access to.
⁠
Procedure 17.5. Assigning a User to a Quota

In the tree, click the Data Center with the quota you want to
associate with a User.
Click the Quota tab in the navigation pane.
Select the target quota in the list in the navigation pane.
*Click the Consumers tab in the details pane.*
Click Add at the top of the details pane.
In the Search field, type the name of the user you want to associate
with the quota.
Click GO.
Select the check box at the left side of the row containing the name
of the target user.
Click OK in the bottom right of the Assign Users and Groups to Quota
window.
Result
After a short time, the user will appear in the Consumers tab of the
details pane.

What happened to the details pane? Is there another way to assign a
quota to users/groups?



Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] openstack Icehouse EOL

2015-08-19 Thread Jorick Astrego
Hi,

I've noticed openstack Icehouse is EOL, what is the next recommended
compatible openstack release for Neutron integration for 3.5?

And for 3.6?



Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Ovirt and Gluster

2015-07-29 Thread Jorick Astrego
For RHEV I don't have an answer.

But for anyone that cares, we've been running oVirt 3.5 and GlusterFS
3.6 for about three months in production now. We run a Gluster cluster
and a seperate virtualization hosts cluster. The Gluster cluster is
installed, configured and managed seperately from oVirt as there is no
way to have a seperate storage network in oVirt 3.5

There have been no specific incompatibility issues, so we are very
happy. But as we don't use every feature mileage may vary.

The best thing is we we're able to kick our Corosync/Pacemaker/DRBD HA
iSCSI nightmare to the curb ;-)

We do recommend using only replica 3 and monitoring your environment and
glusterfs logfiles extensively.

Kind regards,

Jorick Astrego

On 07/29/2015 02:07 AM, John Gardeniers wrote:
 What makes me say that RHEV and the community version of Gluster are
 incompatible is a message from Red Hat saying so.

 Of particular note, the RHSS version of Gluster uses afr-v1, whereas
 the community version uses afr-v2. Exactly how the mismatch will
 manifest itself or what problems may result has not been described.


 On 29/07/15 09:31, Matthew Lagoe wrote:

 Sorry my mistake I ment RHEV

  

 *From:*John Gardeniers [mailto:jgardeni...@objectmastery.com]
 *Sent:* Tuesday, July 28, 2015 04:30 PM
 *To:* Matthew Lagoe; 'Donny Davis'
 *Cc:* 'users'
 *Subject:* Re: [ovirt-users] Ovirt and Gluster

  

 Seriously? I very explicitly said RHEV, not Ovirt.

 On 29/07/15 09:10, Matthew Lagoe wrote:

 Ive never heard that ovirt isn’t compatible with the community
 version of gluster. What is it that makes you say that?

  

 *From:*users-boun...@ovirt.org mailto:users-boun...@ovirt.org
 [mailto:users-boun...@ovirt.org] *On Behalf Of *John Gardeniers
 *Sent:* Tuesday, July 28, 2015 04:06 PM
 *To:* Donny Davis
 *Cc:* users
 *Subject:* Re: [ovirt-users] Ovirt and Gluster

  

 No, not yet. I figured that I should be able to get better
 answers here, as the Gluster list has been particularly poor for
 answers to Ovirt related questions.


 On 29/07/15 08:55, Donny Davis wrote:

 One more question
 Have you asked anyone on the gluster list?

 On Jul 28, 2015 5:32 PM, John Gardeniers
 jgardeni...@objectmastery.com
 mailto:jgardeni...@objectmastery.com wrote:

 The feature I require is solid compatibility between Ovirt
 and Gluster. We currently use RHEV and now learn that it is
 inherently, and possibly quite deliberately, incompatible
 with the community versions of Gluster.


 On 29/07/15 08:18, Donny Davis wrote:

 What feature is it that you need for your production
 environment? I would be looking for !required! features
 for the environment, and then which versions are the most
 mature.

  

  

  

 On Tue, Jul 28, 2015 at 5:07 PM, John Gardeniers
 jgardeni...@objectmastery.com
 mailto:jgardeni...@objectmastery.com wrote:

 That popular Linux company uses versions with reduced
 features and functionality, which have no direct
 comparison to the community versions.




 On 29/07/15 08:04, Donny Davis wrote:

 I would stick with the same versions I see a popular
 Linux company putting out.

 On Jul 27, 2015 6:15 PM, John Gardeniers
 jgardeni...@objectmastery.com
 mailto:jgardeni...@objectmastery.com wrote:

 Hi All,

 What information is available regarding the
 compatibility of Ovirt and Gluster? Is there a
 combination known to be stable and if so, what are
 the relevant versions? I am asking with respect to a
 production system, not an experimental lab environment.

 regards,
 John

 ___
 Users mailing list
 Users@ovirt.org mailto:Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


 
 __
 This email has been scanned by the Symantec Email
 Security.cloud service.
 For more information please visit
 http://www.symanteccloud.com
 
 __

  



  

 -- 

 Donny Davis


 
 __
 This email has been scanned by the Symantec Email
 Security.cloud service.
 For more information please visit
 http://www.symanteccloud.com

Re: [ovirt-users] R: R: R: R: R: R: R: R: PXE boot of a VM on vdsm don't read DHCP offer

2015-07-29 Thread Jorick Astrego


On 07/29/2015 12:12 PM, NUNIN Roberto wrote:
 -Messaggio originale-
 Da: Michael S. Tsirkin [mailto:m...@redhat.com]
 Inviato: mercoledì 29 luglio 2015 12:03
 A: NUNIN Roberto
 Cc: Fabian Deutsch; users@ovirt.org
 Oggetto: Re: R: [ovirt-users] R: R: R: R: R: R: PXE boot of a VM on vdsm 
 don't
 read DHCP offer

 On Wed, Jul 29, 2015 at 12:00:38PM +0200, NUNIN Roberto wrote:
 -Messaggio originale-
 Da: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Per conto
 di
 Michael S. Tsirkin
 Inviato: giovedì 9 luglio 2015 15:15
 A: Fabian Deutsch
 Cc: users@ovirt.org
 Oggetto: Re: [ovirt-users] R: R: R: R: R: R: PXE boot of a VM on vdsm don't
 read
 DHCP offer

 On Thu, Jul 09, 2015 at 08:57:50AM -0400, Fabian Deutsch wrote:
 - Original Message -
 On Wed, Jul 08, 2015 at 09:11:42AM +0300, Michael S. Tsirkin wrote:
 On Tue, Jul 07, 2015 at 05:13:28PM +0100, Dan Kenigsberg wrote:
 On Tue, Jul 07, 2015 at 10:14:54AM +0200, NUNIN Roberto wrote:
 On Mon, Jul 06, 2015 at 10:33:59AM +0200, NUNIN Roberto
 wrote:
 Hi Dan

 Sorry for question: what do you mean for interface vnet ?
 Currently our path is :
 eno1 - eno2   bond0 - bond.3500 (VLAN) -- bridge -
 vm.

 Which one of these ?
 Moreover, reading Fabian statements about bonding limits,
 today I
 can try
 to switch to a config without bonding.

 vm is a complicated term.

 `brctl show` would not show you a vm connected to a bridge.
 When
 you
 WOULD see is a vnet888 tap device. The other side of this
 device
 is
 held by qemu, which implement the VM.
 Ok, understood and found it, vnet2

 I'm asking if the dhcp offer has reached that tap device.
 No, the DHCP offer packet do not reach the vnet2 interface, I can
 see
 only DHCP DISCOVER.
 Ok, so it seems that we have a problem in the host bridging.

 Is it the latest kernel-3.10.0-229.7.2.el7.x86_64 ?

 Michael, a DHCP DISCOVER is sent out of a just-booted guest, and
 OFFER
 returns to the bridge, but is not propagated to the tap device.
 Can you suggest how to debug this further?
 Dump packets including the ethernet headers.
 Likely something interfered with them so the eth address is wrong.

 Since bonding does this sometimes, this is the most likely culprit.
 We've ruled this out already - Roberto reproduces the issue without a
 bond.
 To me this looks like either a regression in the host side bridging. But
 otoh it
 doesn't look
 like it's happening always, because otherwise I'd expect more noise
 around
 this issue.
 - fabian
 Hard to say. E.g. forwarding delay would do this for a while.
 If eth address of the packets is okay, poke at the fbd, maybe there's
 something wrong there. Maybe stp is detecting a loop - try checking that.
 Someone is checking this ?
 In tested config SPT was off.
 Then maybe you have a loop :)
 That was already checked, the MAC was unique in the VLAN.

 RN


Did you also try a reboot of the VM? We have the same issue with foreman
and both Libvirt and oVirt. On second boot PXE boots properly from DHCP.

Haven't had the time to investigate yet so we're using mostly image
based provisioning on oVirt at the moment.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Ovirt and Gluster

2015-07-29 Thread Jorick Astrego


On 07/29/2015 02:24 PM, Joop wrote:
 On 29-7-2015 13:59, Jorick Astrego wrote:
 For RHEV I don't have an answer.

 But for anyone that cares, we've been running oVirt 3.5 and GlusterFS
 3.6 for about three months in production now. We run a Gluster
 cluster and a seperate virtualization hosts cluster. The Gluster
 cluster is installed, configured and managed seperately from oVirt as
 there is no way to have a seperate storage network in oVirt 3.5

 I run something comparable but using a split dns to get a separate
 storage network but also a storage cluster and virt cluster. The
 storage is managed through ovirt though because of the split-dns.

 There have been no specific incompatibility issues, so we are very
 happy. But as we don't use every feature mileage may vary.
 Question: do you use fuse mounts or libgfapi?

 I use libgfapi in test, using special vdsm packages and need to test
 if rebooting gluster nodes has an impact on running VMs. Select
 GlusterFS storage domain in oVirt isn't guaranteed  to give you libgfapi!

 Joop

It's production, so I'm using regular FUSE mounts. Although slower, it
works at least with supported packages.

We did spend some extra on hardware and are conservatively staying close
to the Red Hat Storage hardware requirements. So that means RAID10 for
now and a seperate SSD stroge volume.

For our enterprise customers we are waiting for oVirt 3.6 and will spend
even more on hardware (RDMA, Datacenter bridging, PCIe SSD's, etc) but
we have to do a lot more testing before rolling it out.







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt Instability with Dell Compellent via iSCSI/Multipath

2015-05-21 Thread Jorick Astrego


On 05/21/2015 02:47 AM, Chris Jones - BookIt.com Systems Administrator
wrote:
 Another issue may be that the setting for COMPELNT/Compellent Vol are
 wrong;
 the setting we ship is missing lot of settings that exists in the
 builtin
 setting, and this may have bad effect. If your devices match this , I
 would
 try this multipath configuration, instead of the one vdsm configures.

 device {
 vendor COMPELNT
 product Compellent Vol
 path_grouping_policy multibus
 path_checker tur
 features 0
 hardware_handler 0
 prio const
 failback immediate
 rr_weight uniform
 no_path_retry fail
 }

 I wish I could. We're using the CentOS 7 ovirt-node-iso. The
 multipath.conf is less than ideal but when I tried updating it, oVirt
 instantly overwrites it. To be clear, yes I know changes do not
 survive reboots and yes I know about persist, but it changes it while
 running. Live! Persist won't help there.

 I also tried building a CentOS 7 thick client where I set up CentOS
 7 first, added the oVirt repo, then let the engine provision it. Same
 problem with multipath.conf being overwritten with the default oVirt
 setup.

 So I tried to be slick about it. I made the multipath.conf immutable.
 That prevented the engine from being able to activate the node. It
 would fail on a vds command that gets the nodes capabilities and part
 of what it does is reads then overwrites multipath.conf.

 How do I safely update multipath.conf?


Somehow the multipath.conf that oVirt generates forces my HDD RAID
controller disks to change from /dev/sdb* and /dev/sdc*. So I had to
blacklist these.

I was able to persist it by adding # RHEV PRIVATE right below the #
RHEV REVISION 1.1

Hope this helps






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] [ANN] oVirt 3.6.0 First Alpha Release is now available for testing

2015-05-21 Thread Jorick Astrego


On 05/20/2015 04:18 PM, Sandro Bonazzola wrote:
 The oVirt Project is pleased to announce the availability of the first Alpha 
 release of oVirt 3.6 for testing, as of May 20, 2015.

 oVirt is an open source alternative to VMware vSphere, and provides an 
 excellent KVM management interface for multi-node virtualization.
 The Alpha release is available now for Fedora 20,
 Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and
 Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar).

 The Alpha release can also be deployed on Hypervisor Hosts running Fedora 21 
 and Fedora 22.

 This Alpha release of oVirt includes numerous bug fixes.
 See the release notes [1] for an initial list of the new features and bugs 
 fixed.

 Please refer to release notes [1] for Installation / Upgrade instructions.
 A new oVirt Live ISO  and Node ISO will be available soon[2].

 Please note that mirrors[3] may need usually one day before being 
 synchronized.

 Please refer to the release notes for known issues in this release.

 [1] http://www.ovirt.org/OVirt_3.6_Release_Notes
 [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/
 [3] http://www.ovirt.org/Repository_mirrors#Current_mirrors


I get a dependency error upgrading allinone on CentOS 6.6 x86_64:

Error: Package:

ovirt-engine-setup-plugin-allinone-3.6.0-0.0.master.20150519172219.git9a2e2b3.el6.noarch
(ovirt-3.6)
   Requires: ovirt-host-deploy-offline = 1.4.0
   Installed: ovirt-host-deploy-offline-1.3.1-1.el6.x86_64
(@ovirt-3.5)
   ovirt-host-deploy-offline = 1.3.1-1.el6
   Available: ovirt-host-deploy-offline-1.3.0-1.el6.i686
(ovirt-3.5)
   ovirt-host-deploy-offline = 1.3.0-1.el6
 You could try using --skip-broken to work around the problem
 You could try running: rpm -Va --nofiles --nodigest


Checked the repo and only see this package in the ovirt-3.5 repo

yum -v search ovirt-host-deploy-offline

==
N/S Matched: ovirt-host-deploy-offline
===
ovirt-host-deploy-offline.i686 : oVirt host deploy tool offline settings
Repo: ovirt-3.5
Matched from:



ovirt-host-deploy-offline.x86_64 : oVirt host deploy tool offline
settings
Repo: ovirt-3.5
Matched from:




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] using Network_Custom_Properties for firewalld zone?

2015-05-08 Thread Jorick Astrego
Hi,

Trying to add the ZONE field to the NIC's in oVirt as I'm trying to use
Firewalld instead of iptables.

Manually it works fine but when I try  to set a custom property, it
doesn't apply.

http://www.ovirt.org/Features/Network_Custom_Properties

I can't figure out if this should work or I should use a different method.







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Physical network on New Logical Network dialog

2015-05-08 Thread Jorick Astrego
Hi,

When I try to create a new logical network on our neutron provider,
there is a field for Physical Network


Export
Create on external provider
External Provider
Physical Network


What should I specify? The bond or the bridge of the host?

I searched the documentation but can't find any info.



Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network

2015-05-07 Thread Jorick Astrego


On 05/06/2015 08:15 PM, knarra wrote:
 On 05/06/2015 11:22 PM, Jorick Astrego wrote:


 On 05/06/2015 06:24 PM, knarra wrote:
 On 05/06/2015 06:59 PM, Jorick Astrego wrote:


 On 05/06/2015 02:49 PM, knarra wrote:
 On 05/06/2015 05:33 PM, Jorick Astrego wrote:
 Hi,

 Looking forward to bz 1049994Allow choosing network interface
 for gluster domain traffic.

 Currently I have the bricks on a different storage network and
 can't get the volume details or profile it.

 Will this be handled in 3.6 properly? I don't see any changes in
 gerrit regarding this, but I can be ovelooking it.

 The errors I get currently:

 Could not fetch brick profile stats

 2015-05-06 10:34:22,430 ERROR
 [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery]
 (ajp--127.0.0.1-8702-27) Query
 GetGlusterVolumeProfileInfoQuery failed. Exception message is
 null : java.lang.NullPointerException:
 java.lang.NullPointerException

 and

 Error in fetching the brick details, please try again.

 2015-05-06 10:36:14,205 ERROR
 
 [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery]
 (ajp--127.0.0.1-8702-55) Query
 GetGlusterVolumeAdvancedDetailsQuery failed. Exception
 message is VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick
 glustertest1.netbulae.test/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157) :
 org.ovirt.engine.core.common.errors.VdcBLLException:
 VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157):
 org.ovirt.engine.core.common.errors.VdcBLLException:
 VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157)





 Met vriendelijke groet, With kind regards,

 Jorick Astrego*

 Netbulae Virtualization Experts *
 
 Tel: 053 20 30 270   i...@netbulae.euStaalsteden 4-3A
 KvK 08198180
 Fax: 053 20 30 271   www.netbulae.eu 7547 TA Enschede
 BTW
 NL821234584B01


 



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 Hi,

 Can you please check what does your gluster peer status on
 each of your nodes return?  I guess they are in disconnected state
 and that is the reason you are not able to view these details.

 Thanks
 kasturi

 On the nodes it gives me the following:

 gluster peer status
 Connection failed. Please check if gluster daemon is operational.

 This means that glusterd is not running on this node. you could
 check the status of glusterd by running the command 'service
 glusterd status'.

 please start glusterd by running the command 'service glusterd
 start' on both of your nodes.

 Ideally when glusterd goes down node in ovirt should move to
 non-operational. Because of this BZ 1207150 as of now it is not
 changing the state to non operational.

 There is no glusterd on the compute nodes in our setup, we have two
 clusters. One for virt hosts only and one for GlusterFS only.


 Like I said, everything is Up and running fine. It's just that I
 can't get the stats because the hostname != GlusterFS NIC ip




 But everyting is up and ovirt found the manually configured volume
 perfectly. But the hostname it lists as glustertest1.netbulae.test
 is not what my volume uses for communication as I created the
 volume using the ip's of the storage network.

  
 gluster peer status
 Number of Peers: 2

 Hostname: 10.1.1.3
 Uuid: 1cc0875e-1699-42ae-aed2-9152667ed5af
 State: Peer in Cluster (Connected)

 Hostname: 10.1.1.2
 Uuid: a0b3ac13-7388-441a-a238-1deb023cab6c
 State: Peer in Cluster (Connected)

 Did you import already existing cluster ?

 No, I provisioned the nodes. Added them to our glusterfs cluster
 (with virt service disabled) and created the volume manually.

 oVirt auto-discovered the manual created volume after that.

 Error: No brick  *glustertest1.netbulae.test*:/gluster/brick1 in
 volume data 

 Hostname: *10.1.1.3*

 Things should work better in 3.6 (bz1049994), but I don't

[ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network

2015-05-06 Thread Jorick Astrego
Hi,

Looking forward to bz 1049994Allow choosing network interface for
gluster domain traffic.

Currently I have the bricks on a different storage network and can't get
the volume details or profile it.

Will this be handled in 3.6 properly? I don't see any changes in gerrit
regarding this, but I can be ovelooking it.

The errors I get currently:

Could not fetch brick profile stats

2015-05-06 10:34:22,430 ERROR
[org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery]
(ajp--127.0.0.1-8702-27) Query GetGlusterVolumeProfileInfoQuery
failed. Exception message is null : java.lang.NullPointerException:
java.lang.NullPointerException

and

Error in fetching the brick details, please try again.

2015-05-06 10:36:14,205 ERROR
[org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery]
(ajp--127.0.0.1-8702-55) Query GetGlusterVolumeAdvancedDetailsQuery
failed. Exception message is VdcBLLException: Volume status failed
error: Staging failed on *.*.*.*. Error: No brick
glustertest1.netbulae.test/gluster/brick1 in volume data
Staging failed on *.*.*.*. Error: No brick 
glustertest1.netbulae.test:/gluster/brick1 in volume data
return code: -1 (Failed with error GlusterVolumeStatusFailed and
code 4157) : org.ovirt.engine.core.common.errors.VdcBLLException:
VdcBLLException: Volume status failed
error: Staging failed on *.*.*.*. Error: No brick 
glustertest1.netbulae.test:/gluster/brick1 in volume data
Staging failed on *.*.*.*. Error: No brick 
glustertest1.netbulae.test:/gluster/brick1 in volume data
return code: -1 (Failed with error GlusterVolumeStatusFailed and
code 4157): org.ovirt.engine.core.common.errors.VdcBLLException:
VdcBLLException: Volume status failed
error: Staging failed on *.*.*.*. Error: No brick 
glustertest1.netbulae.test:/gluster/brick1 in volume data
Staging failed on *.*.*.*. Error: No brick 
glustertest1.netbulae.test:/gluster/brick1 in volume data
return code: -1 (Failed with error GlusterVolumeStatusFailed and
code 4157)





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery GetGlusterVolumeProfileInfoQuery when using seperate storage network

2015-05-06 Thread Jorick Astrego


On 05/06/2015 06:24 PM, knarra wrote:
 On 05/06/2015 06:59 PM, Jorick Astrego wrote:


 On 05/06/2015 02:49 PM, knarra wrote:
 On 05/06/2015 05:33 PM, Jorick Astrego wrote:
 Hi,

 Looking forward to bz 1049994Allow choosing network interface
 for gluster domain traffic.

 Currently I have the bricks on a different storage network and
 can't get the volume details or profile it.

 Will this be handled in 3.6 properly? I don't see any changes in
 gerrit regarding this, but I can be ovelooking it.

 The errors I get currently:

 Could not fetch brick profile stats

 2015-05-06 10:34:22,430 ERROR
 [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeProfileInfoQuery]
 (ajp--127.0.0.1-8702-27) Query GetGlusterVolumeProfileInfoQuery
 failed. Exception message is null :
 java.lang.NullPointerException: java.lang.NullPointerException

 and

 Error in fetching the brick details, please try again.

 2015-05-06 10:36:14,205 ERROR
 
 [org.ovirt.engine.core.bll.gluster.GetGlusterVolumeAdvancedDetailsQuery]
 (ajp--127.0.0.1-8702-55) Query
 GetGlusterVolumeAdvancedDetailsQuery failed. Exception message
 is VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick
 glustertest1.netbulae.test/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157) :
 org.ovirt.engine.core.common.errors.VdcBLLException:
 VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157):
 org.ovirt.engine.core.common.errors.VdcBLLException:
 VdcBLLException: Volume status failed
 error: Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 Staging failed on *.*.*.*. Error: No brick 
 glustertest1.netbulae.test:/gluster/brick1 in volume data
 return code: -1 (Failed with error GlusterVolumeStatusFailed
 and code 4157)





 Met vriendelijke groet, With kind regards,

 Jorick Astrego*

 Netbulae Virtualization Experts *
 
 Tel: 053 20 30 270 i...@netbulae.euStaalsteden 4-3A
 KvK 08198180
 Fax: 053 20 30 271 www.netbulae.eu 7547 TA Enschede
 BTW
 NL821234584B01


 



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
 Hi,

 Can you please check what does your gluster peer status on each
 of your nodes return?  I guess they are in disconnected state and
 that is the reason you are not able to view these details.

 Thanks
 kasturi

 On the nodes it gives me the following:

 gluster peer status
 Connection failed. Please check if gluster daemon is operational.

 This means that glusterd is not running on this node. you could check
 the status of glusterd by running the command 'service glusterd status'.

 please start glusterd by running the command 'service glusterd start'
 on both of your nodes.

 Ideally when glusterd goes down node in ovirt should move to
 non-operational. Because of this BZ 1207150 as of now it is not
 changing the state to non operational.

There is no glusterd on the compute nodes in our setup, we have two
clusters. One for virt hosts only and one for GlusterFS only.


Like I said, everything is Up and running fine. It's just that I can't
get the stats because the hostname != GlusterFS NIC ip




 But everyting is up and ovirt found the manually configured volume
 perfectly. But the hostname it lists as glustertest1.netbulae.test is
 not what my volume uses for communication as I created the volume
 using the ip's of the storage network.

  
 gluster peer status
 Number of Peers: 2

 Hostname: 10.1.1.3
 Uuid: 1cc0875e-1699-42ae-aed2-9152667ed5af
 State: Peer in Cluster (Connected)

 Hostname: 10.1.1.2
 Uuid: a0b3ac13-7388-441a-a238-1deb023cab6c
 State: Peer in Cluster (Connected)

 Did you import already existing cluster ?

No, I provisioned the nodes. Added them to our glusterfs cluster (with
virt service disabled) and created the volume manually.

oVirt auto-discovered the manual created volume after that.

Error: No brick  *glustertest1.netbulae.test*:/gluster/brick1 in
volume data 

Hostname: *10.1.1.3*

Things should work better in 3.6 (bz1049994), but I don't see any code
changes to GetGlusterVolumeProfileInfoQuery linked to this in Bugzilla.







Met

Re: [ovirt-users] Finished installing, when creating new VM, the fields are grayed out

2015-05-05 Thread Jorick Astrego


On 05/05/2015 10:20 AM, John Joseph wrote:
 Dear All, 


 Very much new to oVirt, just finished installing Ovirt on CentOS 6.6
 after login as admin, I straight went to create new VM machine, but fields to 
 enter are all greyed(ie not able to enter the value).
 I have attached a screen shot for reference 

 Guidance and advice requested
 Thanks 

 Joseph John 

Hi,

In the screenshot I can see the warning at the bottom Not available
when no datacenter is up, so I think you skipped some steps ;-)

Try reading this:

http://www.ovirt.org/Quick_Start_Guide#Configure_Data_Centers





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] neutron subnet problems

2015-04-30 Thread Jorick Astrego
Caused by: java.lang.IllegalArgumentException: Parameter #0 type for
factory method ([method valueOf, annotations: {interface

org.codehaus.jackson.annotate.JsonCreator=@org.codehaus.jackson.annotate.JsonCreator()}])
not suitable, must be java.lang.String
at

org.codehaus.jackson.map.deser.std.EnumDeserializer.deserializerForCreator(EnumDeserializer.java:49)
[jackson-mapper-asl-1.9.2.jar:1.9.2]
at

org.codehaus.jackson.map.deser.BasicDeserializerFactory.createEnumDeserializer(BasicDeserializerFactory.java:495)
[jackson-mapper-asl-1.9.2.jar:1.9.2]
at

org.codehaus.jackson.map.deser.StdDeserializerProvider._createDeserializer(StdDeserializerProvider.java:401)
[jackson-mapper-asl-1.9.2.jar:1.9.2]
at

org.codehaus.jackson.map.deser.StdDeserializerProvider._createAndCache2(StdDeserializerProvider.java:341)
[jackson-mapper-asl-1.9.2.jar:1.9.2]
... 143 more







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] removing neutron networks

2015-04-29 Thread Jorick Astrego
Hi,

After my update to 3.5.2 final, I started messing about with the Neutron
integration again.

I created and removed several networks but the list keeps adding each
new network when I use import, the old ones still remain.


2015-04-29 17:28:21,293 INFO 
[org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand]
(org.ovirt.thread.pool-8-thread-45) [58f7886b] Running command:
RemoveNetworkCommand internal: false. Entities affected :  ID:
4526582c-eef6-4562-97ad-facdf4590356 Type: NetworkAction group
CONFIGURE_STORAGE_POOL_NETWORK with role type ADMIN
2015-04-29 17:28:21,545 ERROR
[org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand]
(org.ovirt.thread.pool-8-thread-45) [58f7886b] Command
org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand throw Vdc
Bll exception. With error message VdcBLLException: (Failed with
error PROVIDER_FAILURE and code 5050)
2015-04-29 17:28:21,548 INFO 
[org.ovirt.engine.core.bll.network.dc.RemoveNetworkCommand]
(org.ovirt.thread.pool-8-thread-45) [58f7886b] Command
[id=163db1a8-d281-43e7-8bc1-a5229ffe4555]: Compensating
DELETED_OR_UPDATED_ENTITY of
org.ovirt.engine.core.common.businessentities.network.Network;
snapshot: id=4526582c-eef6-4562-97ad-facdf4590356.
2015-04-29 17:28:21,598 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-8-thread-45) [58f7886b] Correlation ID:
58f7886b, Call Stack: null, Custom Event ID: -1, Message: Failed to
remove Network EN_uplink from Data Center: Netbulae

And in neutron server.log:

2015-04-29 19:28:23.347 1027 INFO neutron.api.v2.resource
[req-44768a7f-7443-4da7-b162-c91b3f8d78d3 None] delete failed
(client error): Network 36a7a012-d94c-4a0f-b369-47d1d04f5942 could
not be found

When I check in Neutron, there are only two listed.

neutron net-list

+--+-+---+
| id   | name|
subnets   |

+--+-+---+
| 66ef5f7f-b0d1-4ef9-8b5e-d7a7aa315d58 | public  |
37ea25da-68a1-478b-ab30-8cf6ad104ccb ***.***.***.**/26 |
| 5e90abfb-19c1-4b09-b387-8f2b815cad30 | private |
60f29e92-5461-4eba-a375-4016bc4c6f39 172.17.0.0/24|

+--+-+---+


So it appears oVirt doesn't handle things correctly when I remove the
networks from neutron directly.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt 3.5 problem with gluster, can't set the group and can't find ovirt packages

2015-04-22 Thread Jorick Astrego


On 04/22/2015 02:45 PM, Lars Nielsen wrote:
 Hey again
 I keep getting this still:
 Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No
 such file or directory
 Still no luck after reinstall

 - Lars


 On 19/04/15 18:05, Lars Nielsen wrote:
 Hey

 Will try it.
 Thank you very much

 - Lars

 On 19 Apr 2015, at 12:35, Bernd Broermann be...@broermann.com wrote:

 Hi,

 I saw the same behavior in  past.

 I solved it by reinstall  glusterfs-server package.
rpm -qf /var/lib/glusterd/groups/virt
glusterfs-server-3.6.2-1.el7.x86_64

yum reinstall glusterfs-server

 Might fix it you also.

 Bernd


 Am 17.04.2015 um 19:52 schrieb Lars Nielsen:
 Hey again :)
 I have a problem with ovirt 3.5. I am trying to setup oVirt 3.5 and
 using gluster following this guide:
 http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/


 However when I run the install command:
 yum install -y ovirt-hosted-engine-setup
 I get the output:
 No package overt-hosted-engine-setup available
 Error nothing to do.

 But I have run:
 yum localinstall -y
 http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm
 I get no error, and I have checked the log files.

 And when I run this command:
 gluster volume set engine group virt
 I get this output:
 Unable to open file ‘/var/lib/glusterd/groups/virt’. Error: No
 such file or directory

 Hope some one can help.

 Thanks in advance

 - Lars Nielsen




 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

 -- 
 Bernd Broermann
 Wellingsbütteler Landstr. 241
 22337 Hamburg

 0172/2982498
 040/5370
 http://www.broermann.com
 RHCE - Redhat Certified Engineer


Hi,

I think this is this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1129592

Netbulae mailto:i...@netbulae.com 2014-08-14 05:50:15 EDT

I just read something about this in the following article:

http://blog.gluster.org/2014/05/ovirt-3-4-glusterized/


Create a file named `/var/lib/glusterd/groups/virt' and paste in the lines 
below. This provides a virt group with settings optimized for VM storage. 
I've left off two quorum-related options present in the original group 
definition. These quorum settings help prevent split-brain, but will cause VMs 
hosted on Gluster volumes with the settings applied to pause when one of our 
two machines goes offline.

quick-read=off
read-ahead=off
io-cache=off
stat-prefetch=off
eager-lock=enable
remote-dio=enable

Next, we'll add our new engine volume to this virt group:

gluster volume set engine group virt


I never createde the virt file and it's not in this directory.

Can it be auto created on setup?


Forgot to add these for cluster 2 nodes:

quorum-type=auto
server-quorum-type=server

As per 
https://github.com/gluster/glusterfs/blob/master/extras/group-virt.example





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] bonding interfaces

2015-04-17 Thread Jorick Astrego


On 04/16/2015 09:49 PM, Bill Dossett wrote:

 Hi,

  

 I had a Gluster Cluster running that I setup with oVirt engine… “had”
 being the operative word here.

  

 Today I connected the second network interface and then went to the
 host and tried to bond this interface to the ovirt mgmt. network… this
 is where the “had” part comes in ;-)

  

 Now I have no working interfaces at all, can’t ping in or out and all
 interfaces say they are down, en1, 2, ovrtmgmt and bond0 when I do an
 ip add (this is centos7)

  

 I have done this quite a few times on RHEV clusters and it always
 worked well, very impressed with it. 

  

 The differences are…

  

 RHEV cluster I was using trunked ports and VLANS

 RHEV I was using 6.4 or 6.5 RHEL 

  

 I think that’s it.

  

 I haven’t really dug into the /etc/sysconfig/network-scripts to see
 what normally goes into the config files to create a bonded interface
 – only to see how to configure my first interface with a vlan and then
 I let ovirtengine do the rest for me as it worked so wellI

  

 I guess I may have to rip it out and start over unless anyone has any
 tips on fixing it.  It’s just PoC anyway, so learning.

  

 Thanks

  

Which version of ovirt do you run? We had some of these problems in test
before, but since 3.5.2rc3 and CentOS 7.1 the problem has been resolved
for us.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Datacenter unresponsive: recovery procedure?

2015-04-16 Thread Jorick Astrego


On 04/16/2015 11:12 AM, Andrea Ghelardi wrote:

 (sorry: resending as I wasn’t part of the list, yet)

  

 hi,

 this is my first post so hallo all and thank you for reading.

 I have an issue with my production Ovirt environment (3.5.1.1-1.el6).

  

 My system consists of several datancers.

 2 of them are connected to an iSCSI SAN and they were working fine.

 Until the moment I had the bad idea of deleting a SAN volume from the
 SAN manager before deleting the associated storage on Ovirt. From that
 moment, the DC where this storage was mounted became not responsive:
 it cannot attach the master storage (or any other).

 I tried to

 1) manually destroy the offending storage (select - destroy) but
 still cannot recover the situation.

 2) right click on master storage and activate it

 3) re-initialize the datacenter using a NFS storage from the working
 sister DC.

  

 All Hosts are still running even though their status is unknown.

 All VM are still running even though their status is not responding.

  

 I half resolved the issue by manually restarting the host where the
 datastore was originally mounted. This cleared the orphaned multipath.

 However, the SPM does not come up still.

 This is an extract of the log

 /2015-04-16 03:51:48,069 WARN 
 [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand]
 (DefaultQuartzScheduler_Worker-14) [61a44b19] could not stop spm of
 pool *0002-0002-0002-0002-009c*on vds
 *89254f23-8748-402a-afc9-08438dca0975*- reason:
 org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
 VDSGenericException: VDSNetworkException: Message timeout which can be
 caused by communication issues/

 /2015-04-16 03:51:48,072 INFO 
 [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand]
 (DefaultQuartzScheduler_Worker-14) [61a44b19] FINISH,
 SpmStopVDSCommand, log id: 4354cf46/

 /2015-04-16 03:51:48,072 WARN 
 [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
 (DefaultQuartzScheduler_Worker-14) [61a44b19] spm stop on spm failed,
 stopping spm selection!/

 /2015-04-16 03:51:58,223 INFO 
 [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
 (DefaultQuartzScheduler_Worker-4) [4ca2d938] hostFromVds::selectedVds
 - Brachetto, spmStatus Free, storage pool IRDC-INTEL/

 /2015-04-16 03:51:58,225 ERROR
 [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
 (DefaultQuartzScheduler_Worker-4) [4ca2d938] SPM Init: could not find
 reported vds or not up - pool:IRDC-INTEL vds_spm_id: 3/

 /2015-04-16 03:51:58,239 INFO 
 [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
 (DefaultQuartzScheduler_Worker-4) [4ca2d938] SPM selection - vds seems
 as spm sovana/

 /2015-04-16 03:51:58,252 INFO 
 [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand]
 (DefaultQuartzScheduler_Worker-4) [4ca2d938] START,
 SpmStopVDSCommand(HostName = sovana, HostId =
 89254f23-8748-402a-afc9-08438dca0975, storagePoolId =
 0002-0002-0002-0002-009c), log id: 63a17687/

  

 storagePoolId = 0002-0002-0002-0002-009c is (was)
 hertz-dstore2 which does not exists anymore on SAN adn ovirt

 hostid  89254f23-8748-402a-afc9-08438dca0975 is sovana server (current
 SPM)

  

  

  

  

 I’m thinking about

 /Put the hosted engine host into Maintenance///

 /Shutdown Ovirt Manager///

 /Rebooted SPM server///

 /Restarted Ovirt Manager///

 /Took hosted engine host out of Maintenance///

  

  

 any help or clue is highly welcomed with cheers and beers

 thank you!




I had comparable issues nearly a year ago after a failed iSCSI failover
that ended in a split brain. Wasn't able to recover from it.

https://bugzilla.redhat.com/show_bug.cgi?id=1108576





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] cdrom not working

2015-04-16 Thread Jorick Astrego


On 04/15/2015 02:45 PM, Michal Skrivanek wrote:
 On Apr 14, 2015, at 12:47 , Jorick Astrego j.astr...@netbulae.eu wrote:

 Hi,

 Normally we use foreman to provision vm's but I am testing with the user 
 interface on 3.5.2rc3 .



 I uploaded an CentOS iso and attached it to the cdrom. I then got a no boot 
 device error.
 does it behave the same via Run Once?
 Can you get the libvirt.xml (e.g. from vdsm.log and any error there?)



Yes same with run-once

The only error I can find is:

Thread-317438::DEBUG::2015-04-16
13:23:06,436::libvirtconnection::143::root::(wrapper) Unknown
libvirterror: ecode: 80 edom: 20 level: 2 message: metadata not
found: Requested metadata element is not present


vdsm.log:

Thread-317445::DEBUG::2015-04-16
13:22:57,497::task::993::Storage.TaskManager.Task::(_decref)
Task=`5bad619b-3a0b-4ab8-b617-f60dcde16bbc`::ref 0 aborting False
Thread-317445::DEBUG::2015-04-16
13:22:57,497::__init__::500::jsonrpc.JsonRpcServer::(_serveRequest)
Return 'StoragePool.getInfo' in bridge with {'info': {'name': 'No
Description', 'isoprefix':

u'/rhev/data-center/mnt/ovirt.netbulae.test:_var_lib_exports_iso/e1f7c360-9bfe-4349-a9d3-bf8526c2db11/images/----',
'pool_status': 'connected', 'lver': 6L, 'domains':

u'f166643e-4049-4ab3-b633-17ff39116f1d:Active,e1f7c360-9bfe-4349-a9d3-bf8526c2db11:Active',
'master_uuid': u'f166643e-4049-4ab3-b633-17ff39116f1d', 'version':
'3', 'spm_id': 3, 'type': 'GLUSTERFS', 'master_ver': 1}, 'dominfo':
{u'f166643e-4049-4ab3-b633-17ff39116f1d': {'status': u'Active',
'diskfree': '1589585117184', 'isoprefix': '', 'alerts': [],
'disktotal': '1609826304000', 'version': 3},
u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'status': u'Active',
'diskfree': '31935430656', 'isoprefix':

u'/rhev/data-center/mnt/ovirt.netbulae.test:_var_lib_exports_iso/e1f7c360-9bfe-4349-a9d3-bf8526c2db11/images/----',
'alerts': [], 'disktotal': '46905950208', 'version': 0}}}
Thread-317445::DEBUG::2015-04-16
13:22:57,498::stompReactor::163::yajsonrpc.StompServer::(send)
Sending response
Dummy-2538::DEBUG::2015-04-16
13:22:58,712::storage_mailbox::731::Storage.Misc.excCmd::(_checkForMail)
dd

if=/rhev/data-center/0002-0002-0002-0002-03b3/mastersd/dom_md/inbox
iflag=direct,fullblock count=1 bs=1024000 (cwd None)
Dummy-2538::DEBUG::2015-04-16
13:22:58,729::storage_mailbox::731::Storage.Misc.excCmd::(_checkForMail)
SUCCESS: err = '1+0 records in\n1+0 records out\n1024000 bytes
(1.0 MB) copied, 0.00275825 s, 371 MB/s\n'; rc = 0
JsonRpc (StompReactor)::DEBUG::2015-04-16
13:22:59,375::stompReactor::98::Broker.StompAdapter::(handle_frame)
Handling message StompFrame command='SEND'
JsonRpcServer::DEBUG::2015-04-16
13:22:59,376::__init__::506::jsonrpc.JsonRpcServer::(serve_requests)
Waiting for request
Thread-317446::DEBUG::2015-04-16
13:22:59,378::task::595::Storage.TaskManager.Task::(_updateState)
Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::moving from state init
- state preparing
Thread-317446::INFO::2015-04-16
13:22:59,378::logUtils::44::dispatcher::(wrapper) Run and protect:
repoStats(options=None)
Thread-317446::INFO::2015-04-16
13:22:59,379::logUtils::47::dispatcher::(wrapper) Run and protect:
repoStats, Return response:
{u'f166643e-4049-4ab3-b633-17ff39116f1d': {'code': 0, 'version': 3,
'acquired': True, 'delay': '0.00055801', 'lastCheck': '4.1',
'valid': True}, u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'code': 0,
'version': 0, 'acquired': True, 'delay': '0.000801236', 'lastCheck':
'8.4', 'valid': True}}
Thread-317446::DEBUG::2015-04-16
13:22:59,379::task::1191::Storage.TaskManager.Task::(prepare)
Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::finished:
{u'f166643e-4049-4ab3-b633-17ff39116f1d': {'code': 0, 'version': 3,
'acquired': True, 'delay': '0.00055801', 'lastCheck': '4.1',
'valid': True}, u'e1f7c360-9bfe-4349-a9d3-bf8526c2db11': {'code': 0,
'version': 0, 'acquired': True, 'delay': '0.000801236', 'lastCheck':
'8.4', 'valid': True}}
Thread-317446::DEBUG::2015-04-16
13:22:59,379::task::595::Storage.TaskManager.Task::(_updateState)
Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::moving from state
preparing - state finished
Thread-317446::DEBUG::2015-04-16

13:22:59,379::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
Owner.releaseAll requests {} resources {}
Thread-317446::DEBUG::2015-04-16

13:22:59,379::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-317446::DEBUG::2015-04-16
13:22:59,379::task::993::Storage.TaskManager.Task::(_decref)
Task=`aa4e9fef-8ac8-4c2a-b536-57b1ad94a5b2`::ref 0 aborting False
Thread-317446::DEBUG::2015-04-16
13:22:59,381

Re: [ovirt-users] Disable admin@internal account

2015-04-15 Thread Jorick Astrego


On 04/15/2015 12:08 PM, Николаев Алексей wrote:
 Hi community!
  
 The Red_Hat_Enterprise_Virtualization-3.5-Administration_Guide says
 how to add users from external directory.
 But now i want to disable admin@internal
 mailto:admin@internal account for security reasons and use it only
 for disaster recovery situations (or then ldaps servers not
 available). Can i do it?
  
 What are best practises for use only external directory?
 If i delete admin@internal mailto:admin@internal account can i add
 it again?


 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
Should be possible last time I asked, see response below:



Subject:Re: [ovirt-users] oVirt 3.5 and FreeIpa
Date:   Thu, 22 Jan 2015 06:59:52 -0500 (EST)
From:   Alon Bar-Lev alo...@redhat.com
To: Jorick Astrego j.astr...@netbulae.eu
CC: users@ovirt.org


snip

Also can we get rid of the internal admin or better just disable
internal authenticationt without problems? As we have ipa we don't want
local login enabled, but in emergency situations we might need to turn
it on quickly.

Yes, you can disable the internal by creating 
/etc/ovirt-engine/engine.conf.d/50-disable-internal.conf
---
ENGINE_EXTENSION_ENABLED_builtin-authn-internal = false
---

Hmmm we have a bug in this case... will fix, so let's just disable the 
authz for now.
---
ENGINE_EXTENSION_ENABLED_internal = false






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] iSCSI interface to GlusterFS cluster

2015-04-13 Thread Jorick Astrego


On 04/12/2015 05:24 PM, Bill Dossett wrote:

 Hi,

  

 Not sure if this can be done using ovirt engine or if I have to do
 this more at the GlusterFS command level.

  

 I have set up a Gluster enabled Cluster with a Volume which is working
 fine…. I can mount it using the filesystem thype glusterfs. 


 While I am going to test this with Ovirt and VMs eventually.  I am
 currently exploring using the cluster as an iSCSI target and if that
 is possible to configure thru ovirt or if I now need to work more at
 the Gluster command level and don’t get to use the nice UI to
 configure this.

  

 Any pointers to what I should read next about this would be appreiciated.

  

 Thanks

  

 *Bill Dossett*

 Systems Architect

 *Tech Central – Global Engineering Services*

  

 *T* +1 303 440 3523

 *M* +44 (0)777 590 8612

 bill.doss...@pb.com mailto:bill.doss...@pb.com

 pitneybowes.com http://pitneybowes.com/


 *Pitney Bowes*

 4750 Walnut Street | Boulder, Colorado, 80301 | USA

  

  


No oVirt doesn't support using the GlusterFS cluster as iSCSI target as
it supports glusterfs native. So you won't get any GUI support from ovirt..

There has been some work done on using GlusterFS in their own community
http://blog.gluster.org/2013/12/libgfapi-and-the-linux-target-driver/ .

But it appears to have stalled a bit
https://forge.gluster.org/gfapi-module-for-linux-target-driver-

Head over to the glusterfs mailinglist for more info.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt-guest-agent outdated?

2015-04-09 Thread Jorick Astrego


On 04/09/2015 10:12 AM, Sandro Bonazzola wrote:
 Il 09/04/2015 10:03, Vinzenz Feenstra ha scritto:
 On 04/09/2015 09:55 AM, Jorick Astrego wrote:

 On 04/09/2015 08:56 AM, Vinzenz Feenstra wrote:
 On 04/08/2015 04:34 PM, Jorick Astrego wrote:
 Hi,
 Hi,
 Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent 
 (installed through cloud-init).

 type=AVC msg=audit(1428510418.333:142): avc:  denied  { read } for  
 pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23
 scontext=system_u:system_r:rhev_agentd_t:s0 
 tcontext=system_u:object_r:sysfs_t:s0 tclass=file
 type=AVC msg=audit(1428510418.333:142): avc:  denied  { open } for  
 pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23
 scontext=system_u:system_r:rhev_agentd_t:s0 
 tcontext=system_u:object_r:sysfs_t:s0 tclass=file
 type=SYSCALL msg=audit(1428510418.333:142): arch=c03e syscall=2 
 success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff a3=0 items=0 ppid=1
 pid=1113 auid=4294967295 uid=175 gid=175 euid=175 suid=175 fsuid=175 
 egid=175 sgid=175 fsgid=175 tty=(none) ses=4294967295
 comm=ovirt-guest-age exe=/usr/bin/python 
 subj=system_u:system_r:rhev_agentd_t:s0 key=(null)

 And when I check the rpm I see:

 rpm -qa|grep ovirt
 ovirt-release-el6-10.0.1-3.noarch
 ovirt-guest-agent-1.0.8-1.el6.noarch

 Well the latest guest agent is always available on epel for el5/6/7 and 
 for fedora in the fedora repos I am not sure why it's not available in the
 public ovirt repositories, however that was somehow always a problem with 
 ovirt releases, but I recommend anyway to use epel for the ovirt guest
 agent due to the fact that I am releasing the guest agent always to epel 
 and it will get updated from there.

 Please also note that the repo location has changed. ovirt-3.5 for el6 is 
 now here: http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6/

 However what I don't know, is how the 3.3.3 repository got installed for 
 you, I am not sure that this was done by the bare 'cloud-init', that might
 be specific to your cloud init configuration.
 Well that can't be specific. I completely wipe the test environment every 
 couple weeks and just provisioned a completely fresh ovirt 3.5.2rc3 install.

 Normally I don't use cloud-init as we have foreman, but I was testing it. 
 The only thing I did was, create new VM and checked the cloud-init/sysprep
 checkbox. The rest oVirt did automatically.

 What I think is happening is that the CentOS 6.5 image in the 
 ovirt-image-repository glance provider is outdated. I used this as template 
 for quick
 testing.

 Does anyone know who maintains these images?
 Sandro, do you by any chance know who does?
 Nobody maintains actively the images in the glance repository.
 I raised the issue a while ago[1] and proposed as get involved task to 
 provide updated images[2] for the glance repository.
 Once new images will be available, Oved can upload them into the glance 
 repository.

 [1] http://lists.ovirt.org/pipermail/devel/2015-April/010193.html
 [2] http://lists.ovirt.org/pipermail/devel/2015-April/010199.html


Ok, I will schedule some time to update them as I had been planning to
get involved some more ;-)

Will upload somewhere next week.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] ovirt-guest-agent outdated?

2015-04-09 Thread Jorick Astrego


On 04/09/2015 08:56 AM, Vinzenz Feenstra wrote:
 On 04/08/2015 04:34 PM, Jorick Astrego wrote:
 Hi,
 Hi,

 Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent
 (installed through cloud-init).

 type=AVC msg=audit(1428510418.333:142): avc:  denied  { read }
 for  pid=1113 comm=ovirt-guest-age name=online dev=sysfs
 ino=23 scontext=system_u:system_r:rhev_agentd_t:s0
 tcontext=system_u:object_r:sysfs_t:s0 tclass=file
 type=AVC msg=audit(1428510418.333:142): avc:  denied  { open }
 for  pid=1113 comm=ovirt-guest-age name=online dev=sysfs
 ino=23 scontext=system_u:system_r:rhev_agentd_t:s0
 tcontext=system_u:object_r:sysfs_t:s0 tclass=file
 type=SYSCALL msg=audit(1428510418.333:142): arch=c03e
 syscall=2 success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff
 a3=0 items=0 ppid=1 pid=1113 auid=4294967295 uid=175 gid=175
 euid=175 suid=175 fsuid=175 egid=175 sgid=175 fsgid=175
 tty=(none) ses=4294967295 comm=ovirt-guest-age
 exe=/usr/bin/python subj=system_u:system_r:rhev_agentd_t:s0
 key=(null)

 And when I check the rpm I see:

 rpm -qa|grep ovirt
 ovirt-release-el6-10.0.1-3.noarch
 ovirt-guest-agent-1.0.8-1.el6.noarch

 Well the latest guest agent is always available on epel for el5/6/7
 and for fedora in the fedora repos I am not sure why it's not
 available in the public ovirt repositories, however that was somehow
 always a problem with ovirt releases, but I recommend anyway to use
 epel for the ovirt guest agent due to the fact that I am releasing the
 guest agent always to epel and it will get updated from there.

 Please also note that the repo location has changed. ovirt-3.5 for el6
 is now here: http://resources.ovirt.org/pub/ovirt-3.5/rpm/el6/

 However what I don't know, is how the 3.3.3 repository got installed
 for you, I am not sure that this was done by the bare 'cloud-init',
 that might be specific to your cloud init configuration.

Well that can't be specific. I completely wipe the test environment
every couple weeks and just provisioned a completely fresh ovirt
3.5.2rc3 install.

Normally I don't use cloud-init as we have foreman, but I was testing
it. The only thing I did was, create new VM and checked the
cloud-init/sysprep checkbox. The rest oVirt did automatically.

What I think is happening is that the CentOS 6.5 image in the
ovirt-image-repository glance provider is outdated. I used this as
template for quick testing.

Does anyone know who maintains these images?







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] ovirt-guest-agent outdated?

2015-04-08 Thread Jorick Astrego
Hi,

Testing 3.5.2rc3, I see AVC denied messages for the ovrit-guest agent
(installed through cloud-init).

type=AVC msg=audit(1428510418.333:142): avc:  denied  { read } for 
pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23
scontext=system_u:system_r:rhev_agentd_t:s0
tcontext=system_u:object_r:sysfs_t:s0 tclass=file
type=AVC msg=audit(1428510418.333:142): avc:  denied  { open } for 
pid=1113 comm=ovirt-guest-age name=online dev=sysfs ino=23
scontext=system_u:system_r:rhev_agentd_t:s0
tcontext=system_u:object_r:sysfs_t:s0 tclass=file
type=SYSCALL msg=audit(1428510418.333:142): arch=c03e syscall=2
success=yes exit=6 a0=7f8a655612b8 a1=8 a2=2803ff a3=0 items=0
ppid=1 pid=1113 auid=4294967295 uid=175 gid=175 euid=175 suid=175
fsuid=175 egid=175 sgid=175 fsgid=175 tty=(none) ses=4294967295
comm=ovirt-guest-age exe=/usr/bin/python
subj=system_u:system_r:rhev_agentd_t:s0 key=(null)

And when I check the rpm I see:

rpm -qa|grep ovirt
ovirt-release-el6-10.0.1-3.noarch
ovirt-guest-agent-1.0.8-1.el6.noarch

Then I checked the cloud-init installed /etc/yum.repos.d/el6-ovirt.repo
and see version 3.3.3 is active. Shouldn't this be updated to 3.5.* 

[ovirt-stable]
name=Older Stable builds of the oVirt project
baseurl=http://ovirt.org/releases/stable/rpm/EL/$releasever/
enabled=1
skip_if_unavailable=1
gpgcheck=0

[ovirt-3.3.3]
name=oVirt 3.3.3 release
baseurl=http://resources.ovirt.org/releases/3.3.3/rpm/EL/$releasever/
enabled=1
skip_if_unavailable=1
gpgcheck=0

[ovirt-updates-testing]
name=Test Updates builds of the oVirt project
baseurl=http://ovirt.org/releases/updates-testing/rpm/EL/$releasever/
enabled=0
skip_if_unavailable=1
gpgcheck=0

[ovirt-beta]
name=Beta builds of the oVirt project
baseurl=http://ovirt.org/releases/beta/rpm/EL/$releasever/
enabled=0
skip_if_unavailable=1
gpgcheck=0

[ovirt-nightly]
name=Nightly builds of the oVirt project
baseurl=http://ovirt.org/releases/nightly/rpm/EL/$releasever/
enabled=0
skip_if_unavailable=1
gpgcheck=0

[ovirt-3.4.0-alpha]
name=3.4.0 alpha testing repo for the oVirt project
baseurl=http://ovirt.org/releases/3.4.0-alpha/rpm/EL/$releasever/
enabled=0
skip_if_unavailable=1
gpgcheck=0

[ovirt-3.4.0-prerelease]
name=Pre release builds of the oVirt 3.4 project
baseurl=http://resources.ovirt.org/releases/3.4.0_pre/rpm/EL/$releasever/
enabled=0
skip_if_unavailable=1
gpgcheck=0







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] cloud-init root password?

2015-04-07 Thread Jorick Astrego


On 04/07/2015 11:31 AM, Michal Skrivanek wrote:
 On Apr 3, 2015, at 13:07 , Jorick Astrego j.astr...@netbulae.eu wrote:

 Hi,

 On 3.5.2rc3, the root password field from cloud-init is missing. How do I 
 set the root password now for a fresh VM?
 Hi Jorick,
 This was 3.5 enhancement to support also non-root users
 you use username root and set a password:-)

 Thanks,
 michal

I normally deploy through foreman and we have ipa integrated, so I
haven't used it in a while.

When I use username root and set the password, how do I add another
normal user then?

Say I want to add an user account  set the root password. When I fill
in the username  password there is no way to login to the system as
this user and gain root access in any way (sudo is not allowed).

So it could have just remained rootpw as the vm is worthless otherwise
or am I missing something?

Regards, Jorick








Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] cloud-init root password?

2015-04-07 Thread Jorick Astrego


On 04/07/2015 01:36 PM, Michal Skrivanek wrote:
 On Apr 7, 2015, at 13:24 , Jorick Astrego j.astr...@netbulae.eu wrote:


 On 04/07/2015 11:31 AM, Michal Skrivanek wrote:


 On Apr 3, 2015, at 13:07 , Jorick Astrego j.astr...@netbulae.eu
 wrote:


 Hi,


 On 3.5.2rc3, the root password field from cloud-init is missing. How do I 
 set the root password now for a fresh VM?

 Hi Jorick,

 This was 3.5 enhancement to support also non-root users

 you use username root and set a password:-)


 Thanks,

 michal


 I normally deploy through foreman and we have ipa integrated, so I


 haven't used it in a while.



 When I use username root and set the password, how do I add another


 normal user then?
 you can only define one. It's not meant to be a guest user management tool.

Ok so IMHO it's pretty useless. I thought it was comparable to anaconda
where you specify the rootpw and an optional user. I expect many call's
if we don't explain they have to use the username root. But we're
building a custom customer front end anyway so we'll just fill in the
root user ourselves I guess.

Let's say a customer creates a new vm, add's a Centos iso to boot from
and wishes the add a rootpw and admin user account, is there any way to
do this currently?



 Say I want to add an user account  set the root password. When I fill


 in the username  password there is no way to login to the system as


 this user and gain root access in any way (sudo is not allowed).



 So it could have just remained rootpw as the vm is worthless otherwise


 or am I missing something?
 it was a specific request for cloud-based images. It only makes sense on 
 templates where you've already initialized root or sudo


If I create templates with initialized root or sudo, I wouldn't have any
need to use cloud init to add another user. I could have done that in
the template as well. Also the templates will become single user as it
doesn't make sense to share the same root with multiple users.






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] cloud-init root password?

2015-04-07 Thread Jorick Astrego


On 04/07/2015 02:26 PM, Amedeo Salvati wrote:
 your mileage may vary!

 For example we use python api with cloud-init and template to reset
 root password (you can use for example command like this: openssl
 rand -hex 10) and to configure network / configuration files and
 freeipa...

  Michal, are you working with plain password or with salted hashed ones?
  I had some experiment on hosted-engine with strange results on that.

 try to use python api  by passing:

 users=params.Users(user=[params.User(user_name=root,
 password=SPASSWORD)])

 have a look at python example on
 http://www.ovirt.org/Features/Cloud-Init_Integration

 Best regards
 Amedeo

Can this also be done with the REST-api? I see a users section in the
example on http://www.ovirt.org/Features/Cloud-Init_Integration

   users
 user
   user_nameroot/user_name
   passwordmyPass/password
 /user
   /users





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] VMs freezing during heals

2015-04-04 Thread Jorick Astrego
:
 [811a0747]
 user_path_at+0x57/0xa0
 Mar 12 23:05:16 static1 kernel:
 [a0204e74] ?
 _xfs_trans_commit+0x214/0x2a0 [xfs]
 Mar 12 23:05:16 static1 kernel:
 [a01eae3e] ?
 xfs_iunlock+0x7e/0xd0 [xfs]
 Mar 12 23:05:16 static1 kernel:
 [81193bc0] vfs_fstatat+0x50/0xa0
 Mar 12 23:05:16 static1 kernel:
 [811aaf5d] ?
 touch_atime+0x14d/0x1a0
 Mar 12 23:05:16 static1 kernel:
 [81193d3b] vfs_stat+0x1b/0x20
 Mar 12 23:05:16 static1 kernel:
 [81193d64] sys_newstat+0x24/0x50
 Mar 12 23:05:16 static1 kernel:
 [810e5c87] ?
 audit_syscall_entry+0x1d7/0x200
 Mar 12 23:05:16 static1 kernel:
 [810e5a7e] ?
 __audit_syscall_exit+0x25e/0x290
 Mar 12 23:05:16 static1 kernel:
 [8100b072]
 system_call_fastpath+0x16/0x1b



 I am wondering if my volume settings are
 causing this.  Can anyone with more
 knowledge take a look and let me know:

 network.remote-dio: on
 performance.stat-prefetch: off
 performance.io-cache: off
 performance.read-ahead: off
 performance.quick-read: off
 nfs.export-volumes: on
 network.ping-timeout: 20
 cluster.self-heal-readdir-size: 64KB
 cluster.quorum-type: auto
 cluster.data-self-heal-algorithm: diff
 cluster.self-heal-window-size: 8
 cluster.heal-timeout: 500
 cluster.self-heal-daemon: on
 cluster.entry-self-heal: on
 cluster.data-self-heal: on
 cluster.metadata-self-heal: on
 cluster.readdir-optimize: on
 cluster.background-self-heal-count: 20
 cluster.rebalance-stats: on
 cluster.min-free-disk: 5%
 cluster.eager-lock: enable
 storage.owner-uid: 36
 storage.owner-gid: 36
 auth.allow:*
 user.cifs: disable
 cluster.server-quorum-ratio: 51%


 Many Thanks,  Alastair



 ___
 Users mailing list
 Users@ovirt.org mailto:Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users


 ___
 Users mailing list
 Users@ovirt.org mailto:Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users







 ___
 Users mailing list
 Users@ovirt.org mailto:Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users








 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] postgresql error on glance image repo

2015-04-03 Thread Jorick Astrego
)
at

org.ovirt.engine.core.aaa.filters.SessionValidationFilter.doFilter(SessionValidationFilter.java:73)
[aaa.jar:]
at

org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:280)
at

org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:248)
at

org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:275)
at

org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:161)
at

org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:489)
at

org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:153)
at

org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:155)
at

org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.rewrite.RewriteValve.invoke(RewriteValve.java:466)
at

org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:368)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:505)
at

org.apache.coyote.ajp.AjpProtocol$AjpConnectionHandler.process(AjpProtocol.java:445)
at
org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930)
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.7.0_75]
Caused by: org.postgresql.util.PSQLException: The column name
disk_storage_type was not found in this ResultSet.
at

org.postgresql.jdbc2.AbstractJdbc2ResultSet.findColumn(AbstractJdbc2ResultSet.java:2542)
at

org.postgresql.jdbc2.AbstractJdbc2ResultSet.getInt(AbstractJdbc2ResultSet.java:2406)
at

org.jboss.jca.adapters.jdbc.WrappedResultSet.getInt(WrappedResultSet.java:1073)
at

org.ovirt.engine.core.dao.DiskDaoDbFacadeImpl$DiskRowMapper.mapRow(DiskDaoDbFacadeImpl.java:116)
[dal.jar:]
at

org.ovirt.engine.core.dao.DiskDaoDbFacadeImpl$DiskRowMapper.mapRow(DiskDaoDbFacadeImpl.java:106)
[dal.jar:]
at

org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:92)
[spring-jdbc.jar:3.1.1.RELEASE]
at

org.springframework.jdbc.core.RowMapperResultSetExtractor.extractData(RowMapperResultSetExtractor.java:1)
[spring-jdbc.jar:3.1.1.RELEASE]
at

org.springframework.jdbc.core.JdbcTemplate$1QueryStatementCallback.doInStatement(JdbcTemplate.java:446)
[spring-jdbc.jar:3.1.1.RELEASE]
at
org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:396)
[spring-jdbc.jar:3.1.1.RELEASE]
... 112 more




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] unable to remove cluster because of blank template

2015-04-03 Thread Jorick Astrego
Testing today ;-)

How do I move/reassign the blank template.

I have two clusters and wish to remove the first one that used to be the
default cluster.

I get the following message: Error while executing action: Cannot
remove Cluster. One or more Template(s) are still associated with it

When I check, I see the Blank template assigned but I'm unable to remove
or edit this.

Blank



2008-Mar-31, 23:00

OK

Storage

TEST

Blank template




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] problem with freeipa aaa-ldap setup

2015-04-03 Thread Jorick Astrego
Hi again,

On a fresh ovirt 3.5.3rc3 install I can't get my ipa integration working
anymore. The aaa extension loads correctly and I see the realm in the
search window of Add system permissions, but no users/groups are
displayed. This used to work fine before and I cannot find any errors.


2015-04-03 11:34:51,935 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Extension 'internal' initialized
2015-04-03 11:34:51,935 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Start of enabled extensions list
2015-04-03 11:34:51,936 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Instance name: 'netbulae-test-authz', Extension
name: 'ovirt-engine-extension-aaa-ldap.authz', Version: '1.0.2',
Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.0.2-1.el7',
License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt
Project', Build interface Version: '0',  File:
'/etc/ovirt-engine/extensions.d/netbulae.test-authz.properties',
Initialized: 'true'
2015-04-03 11:34:51,937 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Instance name: 'netbulae-test-authn', Extension
name: 'ovirt-engine-extension-aaa-ldap.authn', Version: '1.0.2',
Notes: 'Display name: ovirt-engine-extension-aaa-ldap-1.0.2-1.el7',
License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt
Project', Build interface Version: '0',  File:
'/etc/ovirt-engine/extensions.d/netbulae.test-authn.properties',
Initialized: 'true'
2015-04-03 11:34:51,938 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Instance name: 'builtin-authn-internal',
Extension name: 'Internal Authn (Built-in)', Version: 'N/A', Notes:
'', License: 'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The
oVirt Project', Build interface Version: '0',  File: 'N/A',
Initialized: 'true'
2015-04-03 11:34:51,939 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) Instance name: 'internal', Extension name:
'Internal Authz (Built-in)', Version: 'N/A', Notes: '', License:
'ASL 2.0', Home: 'http://www.ovirt.org', Author 'The oVirt Project',
Build interface Version: '0',  File: 'N/A', Initialized: 'true'
2015-04-03 11:34:51,939 INFO 
[org.ovirt.engine.core.extensions.mgr.ExtensionsManager] (MSC
service thread 1-2) End of enabled extensions list




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] firewalld rules for engine

2015-03-31 Thread Jorick Astrego
Hi,

After running engine-setup (3.5.2rc2) on Centos 7, the setup tells me
the following

  In order to configure firewalld, copy the files from
  /etc/ovirt-engine/firewalld to /etc/firewalld/services
  and execute the following commands:
  firewall-cmd -service ovirt-nfs
  firewall-cmd -service ovirt-postgres
  firewall-cmd -service ovirt-https
  firewall-cmd -service ovirt-fence-kdump-listener
  firewall-cmd -service ovirt-websocket-proxy
  firewall-cmd -service ovirt-http

The commands above don't work, shouldn't they be:

firewall-cmd --permanent --add-service ovirt-nfs
firewall-cmd --permanent --add-service ovirt-postgres
firewall-cmd --permanent --add-service ovirt-https
firewall-cmd --permanent --add-service ovirt-fence-kdump-listener
firewall-cmd --permanent --add-service ovirt-websocket-proxy
firewall-cmd --permanent --add-service ovirt-http
firewall-cmd --reload

Kind regards,

Jorick Astrego



Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] Missing packages in patternfly repo

2015-03-23 Thread Jorick Astrego
Hi,

Just a minor issue. We are syncing the patternfly repo in our katello 
environment and always have two packages missing from the patternfly repos.


error_details=
   [{url=
  
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el6.src.rpm;,
 errors=[Not Found]},
{url=
  
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el6.noarch.rpm;,
 errors=[Not Found]}]},

  error_details=
   [{url=
  
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-7-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.noarch.rpm;,
 errors=[Not Found]},
{url=
  
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-7-x86_64/patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.src.rpm;,
 errors=[Not Found]}]},

They are listed as the first packages in the repo primary xml:


package type=rpm
namepatternfly1/name
archnoarch/arch
version epoch=0 ver=1.1.2 rel=1.el7.centos/
checksum type=sha256 pkgid=YES
67fdce5675d5d7bcd35b8b685e437d1ba18ae937d93d78a512d86d34838b114d
/checksum
summary
PatternFly open interface project and its dependencies
/summary
description
PatternFly open interface project, with dependencies bundled
/description
packager/
urlhttps://github.com/patternfly/patternfly/url
time file=1424103137 build=1415658262/
size package=2478544 installed=11073797 archive=11284604/
location 
href=patternfly1-1.1.2-1.fc20/patternfly1-1.1.2-1.el7.centos.noarch.rpm/
format
rpm:licenseASL 2.0/rpm:license
rpm:vendorFedora Project COPR (patternfly/patternfly1)/rpm:vendor
rpm:groupUnspecified/rpm:group
rpm:buildhosti-0001c1c8/rpm:buildhost
rpm:sourcerpmpatternfly1-1.1.2-1.el7.centos.src.rpm/rpm:sourcerpm
rpm:header-range start=872 end=150984/
rpm:provides
rpm:entry name=patternfly1 flags=EQ epoch=0 ver=1.1.2 
rel=1.el7.centos/
/rpm:provides
/format
/package





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] network drag and drop

2015-02-17 Thread Jorick Astrego

On 02/17/2015 02:37 PM, Nathanaël Blanchet wrote:
 Hi all,

 With ovirt 3.5.1, I can't anymore drag and drop network on any
 physical or bonding interface, but right click attachment still works.
 Is it an expected behaviour or a bug?
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users
Hi,

It should work, I had this problem a couple of weeks ago but found out
it was my browser being overloaded and dead slow.

Please try a different browser and see if that works.





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] bonding problems

2015-02-10 Thread Jorick Astrego
,
bridged=false, speed=0, type=0, networkImplementationDetails=null},
bond1 {id=null, vdsId=null, name=bond1, macAddress=null,
networkName=gluster, bondOptions=mode=4 miimon=100,
bootProtocol=STATIC_IP, address=xx.xx.xx.xx, subnet=255.255.255.0,
gateway=null, mtu=9000, bridged=false, type=0,
networkImplementationDetails=null},
bond2 {id=null, vdsId=null, name=bond2, macAddress=null,
networkName=uplink, bondOptions=mode=4 miimon=100,
bootProtocol=NONE, address=null, subnet=null, gateway=null, mtu=0,
bridged=true, type=0, networkImplementationDetails=null}],
removedNetworks=[],
removedBonds=[]) execution failed. Exception: VDSErrorException:
VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
error = Missing required nics for bonding device., code = 21
2015-02-10 17:29:42,425 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-4) [4be2b53a] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw
Vdc Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
error = Missing required nics for bonding device., code = 21 (Failed
with error ERR_BAD_PARAMS and code 21)
2015-02-10 17:30:00,053 INFO 
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(DefaultQuartzScheduler_Worker-32) Autorecovering 2 hosts
2015-02-10 17:30:00,053 INFO 
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(DefaultQuartzScheduler_Worker-32) Autorecovering hosts id:
c4e1f226-a243-4a9a-8fa9-fc65f4518114, name : test4.netbulae.test
2015-02-10 17:30:00,075 INFO 
[org.ovirt.engine.core.bll.ActivateVdsCommand]
(DefaultQuartzScheduler_Worker-32) [655e85c2] Lock Acquired to
object EngineLock [exclusiveLocks= key:
c4e1f226-a243-4a9a-8fa9-fc65f4518114 value: VDS
, sharedLocks= ]


When I check the host I see somehow bond0 has appeared and all the ip's
have been lost.  But I never configured bond0!!!


What's up with the bonding?







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Foreman intergration

2015-01-30 Thread Jorick Astrego
But this would be a foreman feature offcourse, a bit out of scope for
ovirt ;-)

On 01/30/2015 02:37 PM, Jorick Astrego wrote:
 Would not be that hard to script something like this, but I personally
 was thinking about an update scheduler myself. The scheduler stuff is
 already there and the whole update mechanism is handled by
 katello/subscription-manager.

 With a smart update scheduler you could do lots of fancy stuff. Like
 rolling out updates/patches over global deployments in pre-defined
 patterns. You could then use %pre and %post hooks to run any custom
 commands or API call's you like depending on Host Group and
 environment.

 Tie in some reporting and faillure notifications and we all the admins
 can be free to do others things instead of patching thousands of servers
 by hand due to the latest glibc/openssl bug. If the scheduled rollout
 works in test, it should be hands off in production.

 Keep up the great work!

 Cheers,

 Jorick

 On 01/30/2015 02:25 PM, Oved Ourfali wrote:
  Not at the moment. Foreman isn't aware that the host is used as a
 hypervisor in ovirt. Currently foreman allows to create foreman hosts
 in top of ovirt (you can use compute resources in foreman to do that),
 and from the ovirt side it allows you to add a new host taken from
 wither an existing foreman host, or to bare metal provision one. In
 the future we plan to allow adding vms through ovirt that will also be
 also added automatically to foreman, which will allow to assign this
 VM to some host group in foreman, which then will install different
 packaged, and set up stuff according to the host group definition.
 
  Details on the current integration is available at
 
  http://www.ovirt.org/Features/ForemanIntegration
 
  Oved
  On Jan 30, 2015 2:32 PM, Karli Sjöberg wrote:   Hey all!   One
 thing I am keen on exploring is the Foreman/oVirt integration. I 
 have a vision were that could be used to, as a first step, manage the
  updating/patching of the Hosts in our datacenter, and if that turns
 out  successful, remove our current Puppet Dashboard as ENC in our
 main  Puppet Master and trade it in for The Foreman.   The flow I
 imagined was to have Foreman tell oVirt engine to set a Host  in
 Maintenance, update all packages and reboot it, then when it´s back, 
 put it back to Active and move on to the next Host.   Is that
 something that´s been worked on?   /K 
 ___  Users mailing list 
 Users@ovirt.org mailto:ovirt.org 
 http://lists.ovirt.org/mailman/listinfo/users
  ___
  Users mailing list
  Users@ovirt.org mailto:ovirt.org
  http://lists.ovirt.org/mailman/listinfo/users





 Met vriendelijke groet, With kind regards,

 Jorick Astrego*

 Netbulae Virtualization Experts *
 
 Tel: 053 20 30 270i...@netbulae.euStaalsteden 4-3AKvK 
 08198180
 Fax: 053 20 30 271www.netbulae.eu 7547 TA EnschedeBTW 
 NL821234584B01


 



 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users




Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Foreman intergration

2015-01-30 Thread Jorick Astrego
Would not be that hard to script something like this, but I personally
was thinking about an update scheduler myself. The scheduler stuff is
already there and the whole update mechanism is handled by
katello/subscription-manager.

With a smart update scheduler you could do lots of fancy stuff. Like
rolling out updates/patches over global deployments in pre-defined
patterns. You could then use %pre and %post hooks to run any custom
commands or API call's you like depending on Host Group and environment.

Tie in some reporting and faillure notifications and we all the admins
can be free to do others things instead of patching thousands of servers
by hand due to the latest glibc/openssl bug. If the scheduled rollout
works in test, it should be hands off in production.

Keep up the great work!

Cheers,

Jorick

On 01/30/2015 02:25 PM, Oved Ourfali wrote:
 Not at the moment. Foreman isn't aware that the host is used as a hypervisor 
 in ovirt. Currently foreman allows to create foreman hosts in top of ovirt 
 (you can use compute resources in foreman to do that), and from the ovirt 
 side it allows you to add a new host taken from wither an existing foreman 
 host, or to bare metal provision one. In the future we plan to allow adding 
 vms through ovirt that will also be also added automatically to foreman, 
 which will allow to assign this VM to some host group in foreman, which then 
 will install different packaged, and set up stuff according to the host group 
 definition. 

 Details on the current integration is available at

 http://www.ovirt.org/Features/ForemanIntegration

 Oved
 On Jan 30, 2015 2:32 PM, Karli Sjöberg wrote:   Hey all!   One thing I am 
 keen on exploring is the Foreman/oVirt integration. I  have a vision were 
 that could be used to, as a first step, manage the  updating/patching of the 
 Hosts in our datacenter, and if that turns out  successful, remove our 
 current Puppet Dashboard as ENC in our main  Puppet Master and trade it in 
 for The Foreman.   The flow I imagined was to have Foreman tell oVirt 
 engine to set a Host  in Maintenance, update all packages and reboot it, 
 then when it´s back,  put it back to Active and move on to the next Host.  
  Is that something that´s been worked on?   /K  
 ___  Users mailing list  
 Users@ovirt.org  http://lists.ovirt.org/mailman/listinfo/users
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users





Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


[ovirt-users] hashed adminpassword?

2015-01-28 Thread Jorick Astrego
Can I hash the password in OVESETUP_CONFIG/adminPassword, I'd like to
have puppet run the installer with an answer file and don't like this
password stored in clear text in foreman and the documentation.

I know it doesn't guarantee security on it's own, but not everyone has
to see that my password is 123456 ;-







Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] gluster only hosts managed by oVirt?

2015-01-28 Thread Jorick Astrego

On 01/28/2015 04:56 AM, Kanagaraj wrote:

 On 01/27/2015 06:47 PM, Sven Kieske wrote:

 On 27/01/15 13:56, Jorick Astrego wrote:
 For both we provision some custom os install and configuration.
 Currently I am only able to manage and view gluster volumes from ovirt
 when the Enable Gluster Service is enabled for the Cluster. Right?
 AFAIK correct.

 Right.


 There is a Enable Virt Service flag but the options is selected and
 greyed out. So I'm not able to disable it.
 Mhm this is sad. I'm not aware of any bug tracking this, will you open
 one? It's also possible I missed it, there are too many bugs to
 remember them all.

 This can happen if there are any VMS in the cluster you are trying to
 edit.

 Do you have any VMS running on the cluster?

 If you create cluster with just 'Enable Gluster Service' selected, you
 should be able to manage your gluster hosts. Here the hosts need not
 to have any virtualization stuff in it.


 Thanks,
 Kanagaraj


Ah this could be a problem, I had been testing with nodes too that I
removed although I cannot remember the exact sequence.

There may have been some remnants of vm's on there, I'm currently
reprovisioning the whole environment so I cannot check.

What I did test before wiping everything, is creating a new cluster and
I was able to deselect the virt service and select gluster only. So that
appears to work, nice!

One problem I already noticed is that the import current gluster setup
function doesn't work properly in our environment. We use a seperate
gluster storage lan that isn't the sepearated from our ovirtmgmt lan and
I think this messes things up a bit.

But I will see after provisioning has finished.

Thanks a lot so far!






Met vriendelijke groet, With kind regards,

Jorick Astrego

Netbulae Virtualization Experts 



Tel: 053 20 30 270  i...@netbulae.euStaalsteden 4-3A
KvK 08198180
Fax: 053 20 30 271  www.netbulae.eu 7547 TA Enschede
BTW NL821234584B01



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] Network config

2015-01-27 Thread Jorick Astrego
Ah yes, I forgot to disable it as I switched to foreman provisioning.

Maybe it can be auto detected and disabled in the install host scripts
when ovirt installs vdsm and sets up the networking. For people who
forget to disable it.

But now I get this:

sourceRoute::DEBUG::2015-01-27
14:33:57,416::utils::739::root::(execCmd) /sbin/ip -4 route add
0.0.0.0/0 via ***.***.***.*** dev bond0 table 174351414 (cwd None)
sourceRoute::DEBUG::2015-01-27
14:33:57,420::utils::759::root::(execCmd) FAILED: err = 'RTNETLINK
answers: File exists\n'; rc = 2
sourceRoute::ERROR::2015-01-27
14:33:57,420::sourceroute::88::root::(configure) ip binary failed
during source route configuration: ['RTNETLINK answers: File exists']
sourceRoute::WARNING::2015-01-27
14:33:57,420::utils::129::root::(rmFile) File:
/var/run/vdsm/trackedInterfaces/bond0 already removed

Jan 27 14:38:19 test3.netbulae.test network[3042]: RTNETLINK
answers: File exists
Jan 27 14:38:19 test3.netbulae.test systemd[1]: network.service:
control process exited, code=exited status=1
Jan 27 14:38:19 test3.netbulae.test systemd[1]: Failed to start LSB:
Bring up/down networking.
-- Subject: Unit network.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- 
-- Unit network.service has failed.
-- 
-- The result is failed.
Jan 27 14:38:19 test3.netbulae.test systemd[1]: Unit network.service
entered failed state.



Bond0 is still there though

sourceRoute::DEBUG::2015-01-27
14:33:57,410::sourceroutethread::39::root::(process_IN_CLOSE_WRITE_filePath)
Responding to DHCP response in /var/run/vdsm/sourceRoutes/1422365637
sourceRoute::INFO::2015-01-27
14:33:57,416::sourceroute::78::root::(configure) Configuring gateway
- ip: **.***.**.**, network: 10.100.100.0/24, subnet: 255.255.255.0,
gateway: **.***.**.**, table: 174351414, device: bond0
sourceRoute::DEBUG::2015-01-27
14:33:57,416::utils::739::root::(execCmd) /sbin/ip -4 route add
0.0.0.0/0 via **.***.**.** dev bond0 table 174351414 (cwd None)
sourceRoute::DEBUG::2015-01-27
14:33:57,420::utils::759::root::(execCmd) FAILED: err = 'RTNETLINK
answers: File exists\n'; rc = 2
sourceRoute::ERROR::2015-01-27
14:33:57,420::sourceroute::88::root::(configure) ip binary failed
during source route configuration: ['RTNETLINK answers: File exists']
sourceRoute::WARNING::2015-01-27
14:33:57,420::utils::129::root::(rmFile) File:
/var/run/vdsm/trackedInterfaces/bond0 already removed
sourceRoute::DEBUG::2015-01-27
14:37:52,085::sourceroutethread::39::root::(process_IN_CLOSE_WRITE_filePath)
Responding to DHCP response in /var/run/vdsm/sourceRoutes/1422365872
sourceRoute::INFO::2015-01-27
14:37:52,090::sourceroute::78::root::(configure) Configuring gateway
- ip: **.***.**.**, network: 10.100.100.0/24, subnet: 255.255.255.0,
gateway: **.***.**.**, table: 174351414, device: bond0
sourceRoute::DEBUG::2015-01-27
14:37:52,090::utils::739::root::(execCmd) /sbin/ip -4 route add
0.0.0.0/0 via **.***.**.** dev bond0 table 174351414 (cwd None)
sourceRoute::DEBUG::2015-01-27
14:37:52,094::utils::759::root::(execCmd) FAILED: err = 'RTNETLINK
answers: File exists\n'; rc = 2
sourceRoute::ERROR::2015-01-27
14:37:52,094::sourceroute::88::root::(configure) ip binary failed
during source route configuration: ['RTNETLINK answers: File exists']
sourceRoute::WARNING::2015-01-27
14:37:52,094::utils::129::root::(rmFile) File:
/var/run/vdsm/trackedInterfaces/bond0 already removed


If you need more info, let me know.


On 01/27/2015 02:20 PM, Ondřej Svoboda wrote:
 Jorick,

 just what comes to my mind: do you have NetworkManager running, by any
 chance? VDSM and NetworkManager don't mix well currently so please try

 # systemctl stop NetworkManager
 # systemctl disable NetworkManager

 Regards,
 Ondra Svoboda

 On 27.1.2015 14:10, Jorick Astrego wrote:

 On 01/27/2015 01:56 PM, Koen Vanoppen wrote:
 Hello everybody,

 Just wanted to know if anybody else has the problem, that when you
 restart your network configuration of a hypervisor, all the settings
 concerning the bonding are gone...
 Do I file a bug report for this or is this already a known issue?

 Kind regards,

 Koen

 Hmm,

 I cannot restart the network service from the host for some reason:

 Jan 27 14:00:27 test2 systemd: network.service: control process
 exited, code=exited status=1
 Jan 27 14:00:27 test2 systemd: Failed to start LSB: Bring up/down
 networking.


 systemctl status network.service
 network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: failed (Result: exit-code) since Tue 2015-01-27
 14:00:27 CET; 1min 56s ago
   Process: 4113 ExecStart=/etc/rc.d/init.d/network start

  1   2   3   >