https://bugzilla.redhat.com/enter_bug.cgi?product=oVirt
Please select ovirt-engine-webadmin as component.
Thanks,
Kanagaraj
On 05/24/2015 07:18 AM, 肖力 wrote:
How to open bug?
At 2015-05-22 11:48:55, Kanagaraj kmayi...@redhat.com wrote:
Can you please open a bug for this?
Thanks
Can you please open a bug for this?
Thanks,
Kanagaraj
On 05/22/2015 04:24 AM, 肖力 wrote:
I use gluster cmd creat Replicate count 3 and Striped count 4 ,It is
sucess!, and can as storage use!
Tks!
At 2015-05-18 12:21:28, Kanagaraj kmayi...@redhat.com wrote:
Only the stripe count
the replica to 2, then you need 12 bricks.
As mentioned in your message, if the error thrown is Replica Count mast
between in 4 and 16 , its a bug and it should be changed to Stripe
Count must between in 4 and 16
Regards,
Kanagaraj
On 05/18/2015 08:44 AM, 肖力 wrote:
hi
I test create distributed
If you are managing the gluster volume through ovirt, you could just
select the volume in the ui and click Optimize for virt store. It does
the job of setting the required parameters for the volume.
Thanks,
Kanagaraj
On 03/02/2015 10:44 PM, Jason Brooks wrote:
- Original Message
This is currently not supported from oVirt. It will be available in the next
oVirt version.
Thanks,
Kanagaraj
- Original Message -
From: RASTELLI Alessandro alessandro.raste...@skytv.it
To: users@ovirt.org
Sent: Tuesday, February 3, 2015 5:06:02 PM
Subject: [ovirt-users] Creating
in it.
Thanks,
Kanagaraj
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I can see the failures in glusterd log.
Can someone from glusterfs dev pls help on this?
Thanks,
Kanagaraj
- Original Message -
From: Punit Dambiwal hypu...@gmail.com
To: Kanagaraj kmayi...@redhat.com
Cc: Martin Pavlík mpav...@redhat.com, Vijay Bellur
vbel...@redhat.com, Kaushal M
Looks like some issue while peer probing cpu02.
Can you provide 'gluster peer status' output from host cpu04? Also in the same
host, search for any errors in vdsm.log file.
Thanks,
Kanagaraj
- Original Message -
From: Punit Dambiwal hypu...@gmail.com
To: Kanagaraj Mayilsamy kmayi
Do you see any errors in the UI?
Also please provide the engine.log and vdsm.log when the failure occured.
Thanks,
Kanagaraj
On 01/08/2015 02:25 PM, Punit Dambiwal wrote:
Hi Martin,
The steps are below :-
1. Step the ovirt engine on the one server...
2. Installed centos 7 on 4 host node
Can you check if glusterd service is running on the host?
Regards,
Kanagaraj
- Original Message -
From: Martin Pavlík mpav...@redhat.com
To: Punit Dambiwal hypu...@gmail.com
Cc: gluster-us...@gluster.org, Kaushal M kshlms...@gmail.com,
users@ovirt.org
Sent: Wednesday, January 7
Looks like there is some network connectivity issue between the hosts.
Due to this, some hosts might not aware of the existence of the volume,
hence its removed from ovirt. Do you see any errors in gluster log file
when gluster commands fail?
Thanks,
Kanagaraj
On 12/22/2014 01:50 PM, Brent
will not cause any problems to the services which serves the
data. There is no reboot involved if you are importing the hosts to
'gluster-only' cluster. During the host initialization process, glusterd
management daemon will be restarted and ovirtmgmt network bridge will be
created.
Regards,
Kanagaraj
Can you send the corresponding error in vdsm.log from the host?
Also check if glusterd service is running.
Thanks,
Kanagaraj
On 11/24/2014 03:39 PM, Punit Dambiwal wrote:
Hi,
After reboot my Hypervisior host can not activate again in the cluster
and failed with the following error
From vdsm.log error: Connection failed. Please check if gluster daemon
is operational.
Starting glusterd service should fix this issue. 'service glusterd start'
But i am wondering why the glusterd was not started automatically after
the reboot.
Thanks,
Kanagaraj
On 11/24/2014 07:18 PM
Do you see any errors in
/var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log when the
service is trying to start automatically after the reboot?
Thanks,
Kanagaraj
On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
Hi Kanagaraj,
Yes...once i will start the gluster service and then vdsmd
On 11/19/2014 08:28 PM, Fumihide Tani wrote:
Please help!
I'm hosting an oVirt3.5 Engine server (CentOS6.5) and oVirt3.5 Host servers
(CentOS 7.0).
Today, I have stopped all oVirt services (ovirt-engine and vdsmd) and updated oVirt3.5
Engine server and ovirt3.5 Host server by yum update.
Also make sure Compatibility version of the cluster is 3.5
If the issue still persists, look for errors in engine.log and vdsm.log
Thanks,
Kanagaraj
- Original Message -
From: Ryan Nix ryan@gmail.com
To: Users@ovirt.org users@ovirt.org
Sent: Tuesday, October 21, 2014 1:38:12 AM
You can refer http://www.ovirt.org/Change_network_interface_for_Gluster
Thanks,
Kanagaraj
- Original Message -
From: Thomas Keppler (PEBA) thomas.kepp...@kit.edu
To: users@ovirt.org
Sent: Thursday, October 9, 2014 7:36:51 PM
Subject: [ovirt-users] Running a Gluster volume off
the url should be plugin/ShellInABoxPlugin/start.html in shellinabox.json
Thanks,
Kanagaraj
- Original Message -
From: Einav Cohen eco...@redhat.com
To: lofyer lof...@gmail.com, Daniel Erez de...@redhat.com
Cc: users users@ovirt.org
Sent: Wednesday, August 6, 2014 9:32:57 PM
Subject
,
Kanagaraj
- Original Message -
From: Alexander Wels aw...@redhat.com
To: users@ovirt.org
Cc: Demeter Tibor tdeme...@itsmart.hu, Kanagaraj kmayi...@redhat.com
Sent: Saturday, July 12, 2014 2:06:38 AM
Subject: Re: [ovirt-users] remove a lost gluster based datacenter
On Friday, July 11, 2014
On 07/09/2014 01:45 AM, Demeter Tibor wrote:
Dear listmembers,
I have created a test environment for ovirt via four pc and a server.
I have two datacenter on the main server:
- a local datacenter on the server
- a gluster based datacenter by the four dekstop pc
2 weeks ago someone took my
is
the right way.
Thanks,
Kanagaraj
On 06/02/2014 04:54 PM, Nathanaël Blanchet wrote:
Hi all,
I created 3 clusters in unique datacenter. I installed my hosts to the
first one after activating the gluster service in the cluster tab. A
expected otopi installed then the vdsm-gluster rpm
On 05/21/2014 02:04 PM, Gabi C wrote:
Hello!
I have an ovirt setup, 3.4.1, up-to date, with gluster package
3.5.0-3.fc19 on all 3 nodes. Glusterfs setup is replicated on 3
bricks. On 2 nodes 'gluster peeer status' raise 2 peer connected with
it's UUID. On third node 'gluster peer status'
-a237517836d6
-rw---. 1 root root 73 May 21 11:10
d95558a0-a306-4812-aec2-a361a9ddde3e
Shoul I delete d95558a0-a306-4812-aec2-a361a9ddde3e??
On Wed, May 21, 2014 at 12:00 PM, Kanagaraj kmayi...@redhat.com
mailto:kmayi...@redhat.com wrote:
On 05/21/2014 02:04 PM, Gabi C wrote:
Hello
PM, Kanagaraj kmayi...@redhat.com
mailto:kmayi...@redhat.com wrote:
What are the steps which led this situation?
Did you re-install one of the nodes after forming the cluster or
reboot which could have changed the ip?
On 05/21/2014 03:43 PM, Gabi C wrote:
On afected node
engine.log and vdsm.log?
This can mostly happen due to following reasons
- gluster volume status vm-store is not consistently returning the
right output
- ovirt-engine is not able to identify the bricks properly
Anyway, engine.log will give better clarity.
On 05/22/2014 02:24 AM, Alastair
In webadmin portal,
Users(tab) - Select a User - Event Notifier (sub-tab) - Manage Events.
Thanks,
Kanagaraj
On 02/27/2014 06:42 AM, Maurice James wrote:
Where do you set the conditions to be notified for the
ovirt-engine-notifier service
On 02/05/2014 04:48 PM, Gianluca Cecchi wrote:
Hello,
in a test infra I would to temporarily put a Host that is part of
Gluster DC and has gluster volumes active into an ISCSI DC.
I put Gluster DC in maintenance, stop glustervolume and put both hosts
in maintenance.
Then I try to edit host and
From the log org.apache.xmlrpc.XmlRpcException: type
'exceptions.Exception':method glusterHostsList is not supported
Looks like you don't have vdsm-gluster package installed on the host.
Thanks,
Kanagaraj
On 01/20/2014 04:05 PM, Andrew Lau wrote:
Hi,
I'm seeing this weird error on my host
Hi,
From the error, it looks like your host doesn't have vdsm-gluster
package installed.
If you would have done host re-install before moving the host to
gluster-cluster, vdsm-gluster would have not installed.
Thanks,
Kanagaraj
On 12/12/2013 05:43 AM, Pat Pierson wrote:
I am
the
cluster, where in fact it is but registered under
hv01.melb.example.net http://hv01.melb.example.net
What's compatibility version of the clusters?
From 3.3 onwards, gluster-host-uuid is used to identify a host instead
of hostname.
Thanks,
Kanagaraj
Thanks,
Andrew
On 12/06/2013 09:46 AM, Andrew Lau wrote:
Yup - it's ovirt cluster version 3.3 with gluster 3.4.1
what does gluster volume info vol and gluster volume status vol say?
On Fri, Dec 6, 2013 at 3:11 PM, Kanagaraj kmayi...@redhat.com
mailto:kmayi...@redhat.comwrote:
On 12/06/2013 07:55
into maintenance and reinstall it. It will install the
gluster bits and you'll be able to add volumes.
This is possible only if oVirt is installed in 'Both' (Virt+Gluster) mode.
Thanks,
Kanagaraj
Joop
___
Users mailing list
Users@ovirt.org
http
On 09/25/2013 04:40 AM, Gianluca Cecchi wrote:
Hello,
I'm testing GlusterFS on 3.3 with fedora 19 systems.
One engine (ovirt) + 2 nodes (ovnode01 and ovnode02)
Successfully created gluster volume composed by two bricks (one for
each vdsm node) distributed replicated
Suggestion:
If page
,
Kanagaraj
On 09/20/2013 04:35 PM, kumar shantanu wrote:
Hello guys,
I am trying to setup ovirt now and it's installed and setup as per
http://www.ovirt.org/Download.
However when I am doing the first step which is adding host this is
what I am getting in the logs and it's stuck at initializing hosts
'ovirtmgmt' will be created by engine, you dont need to create one, you
can check this exists in your host.
from vdsm.log, vdsmd taking time to complete the initialization. Are
there any vms running in this host?
Thanks,
Kanagaraj
On 09/20/2013 05:00 PM, kumar shantanu wrote:
Hello Kangaraj
On 08/28/2013 06:16 PM, Nux! wrote:
On 28.08.2013 13:19, Sahina Bose wrote:
On 08/28/2013 05:44 PM, Nux! wrote:
Hi,
I have an existing gluster cluster, it's in production and fully
functional. I'd like to be able to manage it from within Ovirt.
Can anyone tell me if I can import this gluster
list.
Thanks,
Kanagaraj
On 08/25/2013 09:23 PM, Matt Marks wrote:
I have 4 Hosts, 2 are down, 1 with bridge network issues, and the
other for ram issues. I ran the volume info and the Volume does not
exist. So I looked into the oVirt admin page and the volume is no
longer there. So
. The CPU you select here should match with the CPU the hosts are having.
Thanks,
Kanagaraj
- Original Message -
From: higkoohk higko...@gmail.com
To: users@ovirt.org
Sent: Friday, August 16, 2013 6:02:21 PM
Subject: [Users] Host Agent-35 moved to Non-Operational state as host does
not meet
people in the list can help you out.
Thanks,
Kanagaraj
The volume starts fine and I am able to create a data domain on the
volume. Once the domain is created I try to create a vm and it fails
creating the disk. Error messages are along the lines of task file
exists and can't remove task files
?
What is the current status of supported browsers?
'Firefox 17 on Linux' and 'Internet Explorer 9+ on any OS'. If you use
any browser other than these, you will see the 'isn't optimal' warning.
Thanks,
Kanagaraj
I remember someone posting a page with browser support but I'm unable
to find
Hi Joop,
Looks like the problem is because of the glusterfs version you are
using. vdsm could not parse the output from gluster.
Can you update the glusterfs to
http://bits.gluster.org/pub/gluster/glusterfs/v3.4.0qa7/x86_64/ and
check it out?
Thanks,
Kanagaraj
On 02/01/2013 03:23 PM
On 02/01/2013 06:47 PM, Joop wrote:
Shireesh Anjal wrote:
On 02/01/2013 05:13 PM, noc wrote:
On 1-2-2013 11:07, Kanagaraj wrote:
Hi Joop,
Looks like the problem is because of the glusterfs version you are
using. vdsm could not parse the output from gluster.
Can you update the glusterfs
like there are no issues with the creation of volume. I am not
familiar with the mount issues, some one else will help you out.
Thanks,
Kanagaraj
- Original Message -
From: Jithin Raju rajuj...@gmail.com
To: Kanagaraj Mayilsamy kmayi...@redhat.com, users@ovirt.org
Sent: Monday
On Friday 04 January 2013 02:15 PM, noc wrote:
On 4-1-2013 7:03, Kanagaraj wrote:
On Friday 04 January 2013 02:12 AM, Joop wrote:
Just saw the question what route to follow for post 3.2 and picked
up something that I didn't know about was going to ask if it was
possible to implement, namely
On Friday 04 January 2013 02:12 AM, Joop wrote:
Just saw the question what route to follow for post 3.2 and picked up
something that I didn't know about was going to ask if it was possible
to implement, namely setting permissions on the volume folder when
creating a gluster volume.
But when
what happens.
- Original Message -
From: yoshinobu.ushida yoshinobu.ush...@gmail.com
To: Kanagaraj Mayilsamy kmayi...@redhat.com
Cc: users@ovirt.org
Sent: Thursday, November 29, 2012 8:09:33 PM
Subject: Re: [Users] problem adding a gluster storage domain.
Hi Kanagaraj-san,
Thank you
the steps?
something like: 192.168.77.107:/test_vol or localhost:/test_vol
- Original Message -
From: yoshinobu.ushida yoshinobu.ush...@gmail.com
To: Kanagaraj Mayilsamy kmayi...@redhat.com
Cc: users@ovirt.org
Sent: Thursday, November 29, 2012 8:57:12 PM
Subject: Re: [Users] problem adding
related UI works. Sometimes I do work on backend
and rest-api as well. I have around 2.5 years of experience in
developing web based management tools and UI frameworks.
Regards
Kanagaraj M
On Thursday 09 August 2012 03:19 AM, Leslie Hawthorn wrote:
Hello everyone,
First of all, congratulations
49 matches
Mail list logo
