Re: [Users] Resizing disks destroys contents
We should update both of vdsm and ovirt-engine or vdsm is enough? I check ovirt el repo and it does not have new version for vdsm. On 10/12/2013 02:11 AM, Dan Kenigsberg wrote: On Sat, Oct 12, 2013 at 12:27:02AM +0330, Mohsen Saeedi wrote: I have same problem too. I have one node as ovirt engine and as hypervisor too. I successfully upgrade our engine from 3.1 to 3.2 and then from 3.2 to 3.3 and everything is ok. then i upgrade our cluster version to 3.3 and then our datacenter to 3.3. I increase 1GB on virtual machine with 20GB thin disk and I receive success message on event and our disk increase to 21GB but after host reboot, i saw message that contains no bootable disk is available!!! then i try to install new os on that disk (Centos 6.4 minimal) and anaconda show the error on screen : No usable disks have found. I think disk corrupt after resizing. it was test VM but it's very if occur for real and functional VMs. Yes, this is indeed a bad bad bug. It was inadvertantly fixed on the master branch a while ago. Yesterday, we've backported the fix to 3.3.0.1 http://lists.ovirt.org/pipermail/users/2013-October/017018.html Please avoid trying ovirt-3.3.0's new disk resize feature on file-based storage, unless you upgrade to vdsm vdsm-4.12.1-4 first. Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Resizing disks destroys contents
I have same problem too. I have one node as ovirt engine and as hypervisor too. I successfully upgrade our engine from 3.1 to 3.2 and then from 3.2 to 3.3 and everything is ok. then i upgrade our cluster version to 3.3 and then our datacenter to 3.3. I increase 1GB on virtual machine with 20GB thin disk and I receive success message on event and our disk increase to 21GB but after host reboot, i saw message that contains no bootable disk is available!!! then i try to install new os on that disk (Centos 6.4 minimal) and anaconda show the error on screen : No usable disks have found. I think disk corrupt after resizing. it was test VM but it's very if occur for real and functional VMs. On10/01/2013 10:49 PM, Federico Simoncelli wrote: Hi Martijn, can you post somewhere the relevant vdsm logs (from the spm host)? Thanks, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Resizing disks destroys contents
I should edit my last email about this topic. I deactive hard and then boot from centos minimal cd and get the no usable disk error. It was my mistake. I change the disk to active disk again and boot with centos cd and i get Storage Device Warning window and one of the lines was: We could not detect partitions of filesystems on this device. sorry for my wrong report. On 10/01/2013 10:49 PM, Federico Simoncelli wrote: Hi Martijn, can you post somewhere the relevant vdsm logs (from the spm host)? Thanks, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Datacenter different storage type
Hi I know we can use one storage type per Data Center. If we want to use more storage type in Data Center, how is it possible? For example i want to user SAN and NFS and local storage. if it is limitation for now and you are working to get ride of this limitation please inform me when it will available or it will available on which version? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Redundant management node
We should use HA on two node with same services (jboss and postges) and config replication between postgresql? Is it true? On 28 Apr 2013 17:59, Itamar Heim ih...@redhat.com wrote: On 04/27/2013 10:41 PM, Mohsen Saeedi wrote: Hi Is it possible to have a extra management node for redundancy? or just we must to backup and restore management node for when we missed it. for example due to any failure. Thanks __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users you can use clustering technologies for this today (easiest is if deploying the engine in a VM). this upcoming work will let you do this bare metal http://www.ovirt.org/Features/**Self_Hosted_Enginehttp://www.ovirt.org/Features/Self_Hosted_Engine ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] ISO path is not empty
Hi I have a problem with Ovirt engine-setup. when i run it and in the setup process then it checks the ISO local path and print a error: directory /ISO is not empty I make a new partition and make ext4 filesystem and the i mount it under /ISO. we know it has a lost+found directory. i think it should be fixed in newer version. Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Migrate Ovirt VMs to KVM(Fedora with virt-manager)
Hi I want to migrate an VM from Ovirt engine to KVM. for example to Fedora 17 and managed it with virt-manager. I know about migrate from KVM to Ovirt but how is vice versa? what steps required for it? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Failed to start service jboss.deployment.subunit.engine.ear.root.war
Hi I installed Ovirt and i set up two virtual machine and it was working very good. then i try to use spice activeX on IE and i changed web.xml file as said on this link: http://wiki.ovirt.org/How_to_Connect_to_SPICE_Console_With_Portal then i restart jboss-as and ovirt-engine and everything was true. then i restart the server and i see some errors on server.log under ovirt-engine dir. and in apache ssl_log i saw this error: GET / HTTP/1.1 404 - I attached the server.log. the main error is: 2012-12-02 20:30:33,511 ERROR [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) {JBAS014653: Composite operation failed and was rolled back. Steps that failed: = {Operation step-2 = {JBAS014671: Failed services = {jboss.deployment.subunit.\engine.ear\.\root.war\.PARSE = org.jboss.msc.service.StartException in service jboss.deployment.subunit.\engine.ear\.\root.war\.PARSE: Failed to process phase PARSE of subdeployment \root.war\ of deployment \engine.ear\ 2012-12-02 20:30:31,121 INFO [org.jboss.as.security] (ServerService Thread Pool -- 24) JBAS013101: Activating Security Subsystem 2012-12-02 20:30:31,122 INFO [org.jboss.as.naming] (ServerService Thread Pool -- 21) JBAS011800: Activating Naming Subsystem 2012-12-02 20:30:31,124 INFO [org.jboss.as.security] (MSC service thread 1-25) JBAS013100: Current PicketBox version=4.0.7.Final 2012-12-02 20:30:31,135 INFO [org.jboss.as.connector] (MSC service thread 1-12) JBAS010408: Starting JCA Subsystem (JBoss IronJacamar 1.0.9.Final) 2012-12-02 20:30:31,145 INFO [org.jboss.as.naming] (MSC service thread 1-24) JBAS011802: Starting Naming Service 2012-12-02 20:30:31,169 INFO [org.jboss.as.connector.subsystems.datasources] (ServerService Thread Pool -- 15) JBAS010404: Deploying non-JDBC-compliant driver class org.postgresql.Driver (version 8.4) 2012-12-02 20:30:31,181 INFO [org.jboss.as.remoting] (MSC service thread 1-22) JBAS017100: Listening on /0.0.0.0:4447 2012-12-02 20:30:31,210 INFO [org.apache.coyote.ajp.AjpProtocol] (MSC service thread 1-13) Starting Coyote AJP/1.3 on ajp--0.0.0.0-8009 2012-12-02 20:30:31,210 INFO [org.apache.coyote.http11.Http11Protocol] (MSC service thread 1-4) Starting Coyote HTTP/1.1 on http--0.0.0.0-8080 2012-12-02 20:30:31,365 INFO [org.jboss.as.remoting] (MSC service thread 1-16) JBAS017100: Listening on /127.0.0.1: 2012-12-02 20:30:31,375 INFO [org.jboss.as.server.deployment.scanner] (MSC service thread 1-23) JBAS015012: Started FileSystemDeploymentService for directory /var/lib/ovirt-engine/deployments 2012-12-02 20:30:31,399 INFO [org.jboss.as.server.deployment.scanner] (DeploymentScanner-threads - 1) JBAS015003: Found engine.ear in deployment directory. To trigger deployment create a file called engine.ear.dodeploy 2012-12-02 20:30:31,424 INFO [org.apache.coyote.http11.Http11Protocol] (MSC service thread 1-22) Starting Coyote HTTP/1.1 on http--0.0.0.0-8443 2012-12-02 20:30:31,484 INFO [org.jboss.as.connector.subsystems.datasources] (MSC service thread 1-12) JBAS010400: Bound data source [java:/ENGINEDataSource] 2012-12-02 20:30:31,493 INFO [org.jboss.as] (Controller Boot Thread) JBAS015951: Admin console listening on http://127.0.0.1:9990 2012-12-02 20:30:31,494 INFO [org.jboss.as] (Controller Boot Thread) JBAS015874: JBoss AS 7.1.1.Final Brontes started in 1309ms - Started 132 of 153 services (19 services are passive or on-demand) 2012-12-02 20:30:31,501 INFO [org.jboss.as.server.deployment] (MSC service thread 1-27) JBAS015876: Starting deployment of engine.ear 2012-12-02 20:30:32,528 WARN [org.jboss.as.server.deployment] (MSC service thread 1-27) Class Path entry jaxb-api.jar in /var/lib/ovirt-engine/deployments/engine.ear/lib/jaxb-impl-2.1.3.jar does not point to a valid jar for a Class-Path reference. 2012-12-02 20:30:32,529 WARN [org.jboss.as.server.deployment] (MSC service thread 1-27) Class Path entry activation.jar in /var/lib/ovirt-engine/deployments/engine.ear/lib/jaxb-impl-2.1.3.jar does not point to a valid jar for a Class-Path reference. 2012-12-02 20:30:32,530 WARN [org.jboss.as.server.deployment] (MSC service thread 1-27) Class Path entry jsr173_1.0_api.jar in /var/lib/ovirt-engine/deployments/engine.ear/lib/jaxb-impl-2.1.3.jar does not point to a valid jar for a Class-Path reference. 2012-12-02 20:30:32,531 WARN [org.jboss.as.server.deployment] (MSC service thread 1-27) Class Path entry jaxb1-impl.jar in /var/lib/ovirt-engine/deployments/engine.ear/lib/jaxb-impl-2.1.3.jar does not point to a valid jar for a Class-Path reference. 2012-12-02 20:30:32,534 INFO [org.jboss.as.server.deployment] (MSC service thread 1-12) JBAS015876: Starting deployment of ovirtengineweb.war 2012-12-02 20:30:32,534 INFO [org.jboss.as.server.deployment] (MSC service thread 1-18) JBAS015876: Starting deployment of engine-bll.jar 2012-12-02 20:30:32,534 INFO [org.jboss.as.server.deployment] (MSC service thread 1-3) JBAS015876: Starting
Re: [Users] [Spice-devel] multiple concurrent spice consoles (was Ovirt + Spice + VDI)
Thanks. we want to develope spice for multiple concurrent spice console on single OS. for example, we want to use windows XP as single VM for multiple users. we want to develop it as spice feature. is it possible? any help or idea? shall we work on that experimental feature? Thanks. Alon Levy al...@redhat.com wrote on Thu, 13 Sep 2012 05:47:37 -0400 (EDT): On 09/12/2012 07:32 PM, Mohsen Saeedi wrote: Hi I want to know, we are force to install one windows per user? does spice can provide a multi remote connection to a single windows XP machine? I want to install one windows XP as virtual desktop and then share it with more than one users.is it possible in now or in the futures? Thanks Thanks for the interest. There is no support for multiple client connections using spice protocol. There is only experimental known buggy support that still needs more work. There is no concrete plan when that work will happen. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users adding spice-devel ___ Spice-devel mailing list spice-de...@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/spice-devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] [Spice-devel] multiple concurrent spice consoles (was Ovirt + Spice + VDI)
John A. Sullivan III jsulli...@opensourcedevel.com wrote on Thu, 13 Sep 2012 08:38:11 -0400: On Thu, 2012-09-13 at 08:06 -0400, Alon Levy wrote: Hi Mohsen, multiple sessions to the single VM are not on the roadmap. There is experimental multi-client support but it is to make more users see the same session. Moshen, I misunderstood. In this case, I guess I don't actually see how we could fix your problem without circumventing any mechanism that windows has to count license users. Please ignore my lengthy email, it won't help you at all. Alon You can use some recipe for get ridding windows XP RDP limitation: http://www.petri.co.il/multiple-remote-desktop-sessions-on-windows-xp-sp3.htm snip We are actually quite interested in something like this. In effect, it is RDS but replaces the RDP protocol with SPICE for the advantages SPICE brings. We have also been toying with the idea of using KVM/KSM to move to a single server per user. This would provide much greater isolation and non-repudiation but we are concerned about the overhead of KVM on the KVM host and deduplication on the SAN. Thanks - John I think so, spice has experimental feature for multiple client to single windows XP now. is it true?? and what is the details for idea of using KVM/KSM to move to a single server per user? I didn't understand it very well. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] multiple concurrent spice consoles (was Ovirt + Spice + VDI)
Thanks itamar Can you tell me when is it available? Is it available on development versions? Best regards On Sep 13, 2012 1:14 AM, Itamar Heim ih...@redhat.com wrote: On 09/12/2012 07:32 PM, Mohsen Saeedi wrote: Hi I want to know, we are force to install one windows per user? does spice can provide a multi remote connection to a single windows XP machine? I want to install one windows XP as virtual desktop and then share it with more than one users.is it possible in now or in the futures? Thanks __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users adding spice-devel ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt engine.log show WARN before login to web administration portal
I changed my config and set the ovirt console on our private ip address. now it's very fast. but on the slow internet link it's very very slow. thanks Roy Golan rgo...@redhat.com wrote on Tue, 4 Sep 2012 02:48:11 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Roy Golan" rgo...@redhat.com Cc: users@ovirt.org Sent: Sunday, September 2, 2012 4:28:03 PM Subject: Re: [Users] Ovirt engine.log show WARN before login to web administration portal I attached the logs (engine.log, engine.log.1) The UI is fetching configuration values from the backend to complete the rendering and I see several seconds passes between each GetConfigurationValue query so it could be that _javascript_ performance is slow or the TCP round-trip between UI and backend is long. Roy Golan rgo...@redhat.com wrote on Sun, 2 Sep 2012 07:49:38 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Itamar Heim" ih...@redhat.com Cc: users@ovirt.org Sent: Sunday, September 2, 2012 2:24:21 PM Subject: Re: [Users] Ovirt engine.log show WARN before login to web administration portal Now i'm using internal authentication. no directory server is used. I have just one admin@internal user. but in the most time, it's very slow to login. I have 3 Ovirt server but i have this problem on one of them. Thanks to understand if its a slow login or the UI takes time to load (browser/client issue?) we have to start with /var/log/engine/engine.log. can you attach it? Itamar Heim ih...@redhat.com wrote on Sun, 02 Sep 2012 14:21:03 +0300: On 09/02/2012 01:42 PM, Mohsen Saeedi wrote: Hi I installed Ovirt3.1 and when i'm trying to login to administration portal i see the below error continuously in the engine.log: 2012-09-02 15:07:24,836 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-11) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,043 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-17) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,249 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-7) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,455 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-16) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,656 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-15) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,862 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-14) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:26,062 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-13) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version I search on the google and i found the bug was reported to redhat bugzilla.I thin it should be fixed on Ovirt 3.1 . finally the login process take longer than 5 minutes or i'm not able to login!! Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users these warning are mostly harmless. which type of authentication provider are you using? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt engine.log show WARN before login to web administration portal
Itamar Heim ih...@redhat.com wrote on Tue, 04 Sep 2012 16:57:13 +0300: On 09/04/2012 04:22 PM, Mohsen Saeedi wrote: I changed my config and set the ovirt console on our private ip address. now it's very fast. but on the slow internet link it's very very slow. thanks first time login may be slow as GWT downloads all the application as _javascript_. post the first login, how long does it take to re-login? Yes.for the first time is very slow. I guess the previous problem occur because my internet connection had problem. GWT should be downloads all application every first time(with new browser or operating system)? /*Roy Golan rgo...@redhat.com*/ wrote on Tue, 4 Sep 2012 02:48:11 -0400 (EDT): - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: "Roy Golan"rgo...@redhat.com Cc:users@ovirt.org Sent: Sunday, September 2, 2012 4:28:03 PM Subject: Re: [Users] Ovirt engine.log show WARN before login to web administration portal I attached the logs (engine.log, engine.log.1) The UI is fetching configuration values from the backend to complete the rendering and I see several seconds passes between each GetConfigurationValue query so it could be that _javascript_ performance is slow or the TCP round-trip between UI and backend is long. Roy Golanrgo...@redhat.com wrote on Sun, 2 Sep 2012 07:49:38 -0400 (EDT): - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: "Itamar Heim" ih...@redhat.com Cc:users@ovirt.org Sent: Sunday, September 2, 2012 2:24:21 PM Subject: Re: [Users] Ovirt engine.log show WARN before login to web administration portal Now i'm using internal authentication. no directory server is used. I have just one admin@internal user. but in the most time, it's very slow to login. I have 3 Ovirt server but i have this problem on one of them. Thanks to understand if its a slow login or the UI takes time to load (browser/client issue?) we have to start with /var/log/engine/engine.log. can you attach it? Itamar Heimih...@redhat.com wrote on Sun, 02 Sep 2012 14:21:03 +0300: On 09/02/2012 01:42 PM, Mohsen Saeedi wrote: Hi I installed Ovirt3.1 and when i'm trying to login to administration portal i see the below error continuously in the engine.log: 2012-09-02 15:07:24,836 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-11) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,043 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-17) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,249 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-7) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,455 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-16) calling GetConfigurationValueQuery (SearchResultsLimit) with null ve
Re: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean
is in that file on any reboots. At least that was my problem when I got that error. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: Mohsen Saeedi mohsen.sae...@gmail.com To: users@ovirt.org Sent: Monday, September 3, 2012 6:59:47 AM Subject: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean Hi i'm usign Ovirt 3.1 on the Centos 6.3 x64. I use engine-cleanup and then use engine-setup again. everything was ok but i got the SELinux error at the end of configuration: Proceed with the configuration listed above? (yes|no): yes Installing: AIO: Validating CPU Compatibility... [ DONE ] Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ ERROR ] Failed to enable SELinux boolean Please check log file /var/log/ovirt-engine/engine-setup_2012_09_03_01_17_41.log for more information I Attached the log file. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean
I think the error occur with this line: # Set selinux configuration nfsutils.setSELinuxContextForDir(controller.CONF[NFS_MP], nfsutils.SELINUX_RW_LABEL) /*Tim Hildred thild...@redhat.com*/ wrote on Sun, 2 Sep 2012 19:30:39 -0400 (EDT): Hey Mohsen; Did you check /etc/sysconfig/selinux to ensure that SELINUX=enforcing? If you set it with setenforce, it would have reverted to whatever is in that file on any reboots. At least that was my problem when I got that error. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: Mohsen Saeedi mohsen.sae...@gmail.com To: users@ovirt.org Sent: Monday, September 3, 2012 6:59:47 AM Subject: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean Hi i'm usign Ovirt 3.1 on the Centos 6.3 x64. I use engine-cleanup and then use engine-setup again. everything was ok but i got the SELinux error at the end of configuration: Proceed with the configuration listed above? (yes|no): yes Installing: AIO: Validating CPU Compatibility... [ DONE ] Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ ERROR ] Failed to enable SELinux boolean Please check log file /var/log/ovirt-engine/engine-setup_2012_09_03_01_17_41.log for more information I Attached the log file. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Ovirt how to change ip address or fqdn?
Hi I want to know how can i change ovirt ip address or fqdn? should i follow specific steps? or just change fqdn in dns and change server ip address. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Ovirt engine.log show WARN before login to web administration portal
Hi I installed Ovirt3.1 and when i'm trying to login to administration portal i see the below error continuously in the engine.log: 2012-09-02 15:07:24,836 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-11) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,043 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-17) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,249 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-7) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,455 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-16) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,656 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-15) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,862 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-14) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:26,062 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-13) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version I search on the google and i found the bug was reported to redhat bugzilla.I thin it should be fixed on Ovirt 3.1 . finally the login process take longer than 5 minutes or i'm not able to login!! Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt engine.log show WARN before login to web administration portal
Now i'm using internal authentication. no directory server is used. I have just one admin@internal user. but in the most time, it's very slow to login. I have 3 Ovirt server but i have this problem on one of them. Thanks Itamar Heim ih...@redhat.com wrote on Sun, 02 Sep 2012 14:21:03 +0300: On 09/02/2012 01:42 PM, Mohsen Saeedi wrote: Hi I installed Ovirt3.1 and when i'm trying to login to administration portal i see the below error continuously in the engine.log: 2012-09-02 15:07:24,836 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-11) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,043 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-17) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,249 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-7) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,455 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-16) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,656 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-15) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:25,862 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-14) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version 2012-09-02 15:07:26,062 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--0.0.0.0-8009-13) calling GetConfigurationValueQuery (SearchResultsLimit) with null version, using default general for version I search on the google and i found the bug was reported to redhat bugzilla.I thin it should be fixed on Ovirt 3.1 . finally the login process take longer than 5 minutes or i'm not able to login!! Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users these warning are mostly harmless. which type of authentication provider are you using? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean
Hi yes. i'm expert in selinux. i check the realtime status with sestatus and current mode and config mode were enforcing. I teach SELinux course from 6 years ago. Thanks. Tim Hildred thild...@redhat.com wrote on Sun, 2 Sep 2012 19:30:39 -0400 (EDT): Hey Mohsen; Did you check /etc/sysconfig/selinux to ensure that "SELINUX=enforcing"? If you set it with setenforce, it would have reverted to whatever is in that file on any reboots. At least that was my problem when I got that error. Tim Hildred, RHCE Content Author II - Engineering Content Services, Red Hat, Inc. Brisbane, Australia Email: thild...@redhat.com Internal: 8588287 Mobile: +61 4 666 25242 IRC: thildred - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: users@ovirt.org Sent: Monday, September 3, 2012 6:59:47 AM Subject: [Users] engine-cleanup and then engine-setup - Failed to enable SELinux boolean Hi i'm usign Ovirt 3.1 on the Centos 6.3 x64. I use engine-cleanup and then use engine-setup again. everything was ok but i got the SELinux error at the end of configuration: Proceed with the configuration listed above? (yes|no): yes Installing: AIO: Validating CPU Compatibility... [ DONE ] Configuring oVirt-engine... [ DONE ] Creating CA... [ DONE ] Editing JBoss Configuration... [ DONE ] Setting Database Configuration... [ DONE ] Setting Database Security... [ DONE ] Creating Database... [ DONE ] Updating the Default Data Center Storage Type... [ DONE ] Editing oVirt Engine Configuration... [ DONE ] Editing Postgresql Configuration... [ DONE ] Configuring the Default ISO Domain... [ DONE ] Configuring Firewall (iptables)... [ DONE ] Starting JBoss Service... [ DONE ] Handling HTTPD... [ ERROR ] Failed to enable SELinux boolean Please check log file /var/log/ovirt-engine/engine-setup_2012_09_03_01_17_41.log for more information I Attached the log file. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Installing Host - action is taking longer than allowed by configuration
I don't have any problem with ssh. i have problem with yum. SSHInactivityTimeoutSeconds is for yum too? my Ovirt engine and vdsm are installed on the same host! how can i see the completed list of ovirt options? Thanks. Dougla s Landgraf dougsl...@redhat.com wrote on Fri, 31 Aug 2012 18:18:38 -0400: On 08/31/2012 05:09 PM, Alon Bar-Lev wrote: - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: users@ovirt.org Sent: Friday, August 31, 2012 11:57:59 PM Subject: [Users] Installing Host - action is taking longer than allowed by configuration Hi I Installed ovirt 3.1 all in one package under centos 6.3 . but when i trying to install localhost as virtualization node (I have one server with local storage) i got a error: The required action is taking longer than allowed by configuration. I know the reason for it. i have very slow connection. I think ovirt clean yum metadata and try to get metadata again. but my internet connection is very slow (about 64Kb/s) and takes a lot of time to finish. how can i increase the allowed time by configuration or some change on postgresql database.? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, You can set the SSHInactivityTimoutSeconds within vdc_options table. # psql -d engine -U postgres -c "update vdc_options set option_value = 600 where option_name = 'SSHInactivityTimoutSeconds';" or try in Engine side using engine-config tool: # engine-config -s SSHInactivityTimoutSeconds=(timer in sec) # systemctl restart ovirt-engine.service ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Installing Host - action is taking longer than allowed by configuration
I found the answer for my second questions: engine-config -l Dougla s Landgraf dougsl...@redhat.com wrote on Fri, 31 Aug 2012 18:18:38 -0400: On 08/31/2012 05:09 PM, Alon Bar-Lev wrote: - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: users@ovirt.org Sent: Friday, August 31, 2012 11:57:59 PM Subject: [Users] Installing Host - action is taking longer than allowed by configuration Hi I Installed ovirt 3.1 all in one package under centos 6.3 . but when i trying to install localhost as virtualization node (I have one server with local storage) i got a error: The required action is taking longer than allowed by configuration. I know the reason for it. i have very slow connection. I think ovirt clean yum metadata and try to get metadata again. but my internet connection is very slow (about 64Kb/s) and takes a lot of time to finish. how can i increase the allowed time by configuration or some change on postgresql database.? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, You can set the SSHInactivityTimoutSeconds within vdc_options table. # psql -d engine -U postgres -c "update vdc_options set option_value = 600 where option_name = 'SSHInactivityTimoutSeconds';" or try in Engine side using engine-config tool: # engine-config -s SSHInactivityTimoutSeconds=(timer in sec) # systemctl restart ovirt-engine.service ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Installing Host - action is taking longer than allowed by configuration
Thanks for your answer. the correct option is SSHInactivityTimoutSeconds.I increased it to 2400 seconds and my problem solved. I apologize for my boring questions. Best regards Dougla s Landgraf dougsl...@redhat.com wrote on Fri, 31 Aug 2012 18:18:38 -0400: On 08/31/2012 05:09 PM, Alon Bar-Lev wrote: - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: users@ovirt.org Sent: Friday, August 31, 2012 11:57:59 PM Subject: [Users] Installing Host - action is taking longer than allowed by configuration Hi I Installed ovirt 3.1 all in one package under centos 6.3 . but when i trying to install localhost as virtualization node (I have one server with local storage) i got a error: The required action is taking longer than allowed by configuration. I know the reason for it. i have very slow connection. I think ovirt clean yum metadata and try to get metadata again. but my internet connection is very slow (about 64Kb/s) and takes a lot of time to finish. how can i increase the allowed time by configuration or some change on postgresql database.? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi, You can set the SSHInactivityTimoutSeconds within vdc_options table. # psql -d engine -U postgres -c "update vdc_options set option_value = 600 where option_name = 'SSHInactivityTimoutSeconds';" or try in Engine side using engine-config tool: # engine-config -s SSHInactivityTimoutSeconds=(timer in sec) # systemctl restart ovirt-engine.service ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Installing Host - action is taking longer than allowed by configuration
Hi I Installed ovirt 3.1 all in one package under centos 6.3 . but when i trying to install localhost as virtualization node (I have one server with local storage) i got a error: The required action is taking longer than allowed by configuration. I know the reason for it. i have very slow connection. I think ovirt clean yum metadata and try to get metadata again. but my internet connection is very slow (about 64Kb/s) and takes a lot of time to finish. how can i increase the allowed time by configuration or some change on postgresql database.? Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Host CPU type is not compatible with Cluster Properties
It's Intel Xeon CPU 5130. Itamar, as you said i run that command and i paste the command output below: [root@kvm01 ~]# vdsClient -s 0 getVdsCaps grep -i flags HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:9c1d1149e962'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:9c1d1149e962 bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}} clusterLevels = ['3.0', '3.1'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow cpuModel = Intel(R) Xeon(R) CPU 5130 @ 2.00GHz cpuSockets = 2 cpuSpeed = 1999.793 emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {'before_vm_start': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}, '10_simpleqemu': {'md5': '2c88a35172c02f2125fafe39c1c95fa9'}}, 'after_vm_destroy': {'50_vhostmd': {'md5': '47f8d385859e4c3c96113d8ff446b261'}}, 'before_vm_dehibernate': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}}, 'before_vm_migrate_destination': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}}} kvmEnabled = true lastClient = 217.219.236.9 lastClientIface = ovirtmgmt management_ip = memSize = 7868 networks = {'ovirtmgmt': {'addr': '217.219.236.9', 'cfg': {'DNS2': '4.2.2.1', 'DNS1': '8.8.8.8', 'IPADDR': '217.219.236.9', 'GATEWAY': '217.219.236.20', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'none', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'bridged': True, 'gateway': '217.219.236.20', 'ports': ['eth2']}} nics = {'eth2': {'hwaddr': '00:1b:78:02:5f:a6', 'netmask': '', 'speed': 1000, 'addr': '', 'mtu': '1500'}, 'eth1': {'hwaddr': '00:23:7d:28:db:ba', 'netmask': '', 'speed': 0, 'addr': '', 'mtu': '1500'}, 'eth0': {'hwaddr': '00:23:7d:28:db:b8', 'netmask': '255.255.255.0', 'speed': 1000, 'addr': '192.168.1.241', 'mtu': '1500'}} operatingSystem = {'release': '2.el6.centos.7', 'version': '6', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': 1337110297.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', 'buildtime': '1323304307', 'version': '0.8.2'}, 'vdsm': {'release': '0.274.git937a4b7.el6', 'buildtime': '1339052732', 'version': '4.9.6'}, 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1336984850', 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', 'buildtime': '1334928354', 'version': '0.9.4'}, 'qemu-img': {'release': '2.209.el6_2.5', 'buildtime': '1336984850', 'version': '0.12.1.2'}} reservedMem = 321 software_revision = 0.274 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0', '3.1'] uuid = 34313638-3934-435A-4A37-313230394E30_00:1b:78:02:5f:a6 version_name = Snow Man vlans = {} vmTypes = ['kvm'] Thanks Haim Ateya hat...@redhat.com wrote on Sat, 09 Jun 2012 11:36:46 -0400 (EDT): - Original Message - From: "Itamar Heim" ih...@redhat.com To: "Mohsen Saeedi" mohsen.sae...@gmail.com Cc: users@ovirt.org Sent: Saturday, June 9, 2012 5:35:45 PM Subject: Re: [Users] Host CPU type is not compatible with Cluster Properties On 06/09/2012 04:02 PM, Mohsen Saeedi wrote: Hi I have problem with cpu type in Ovirt. I have a HP server with Intel(R) Xeon(R) CPU 5130 @ 2.00GHz. when i try to add this host as Ovirt host in default cluster, i get the error message: Host CPU type is not com
[Users] Host CPU type is not compatible with Cluster Properties
Hi I have problem with cpu type in Ovirt. I have a HP server with Intel(R) Xeon(R) CPU 5130 @ 2.00GHz. when i try to add this host as Ovirt host in default cluster, i get the error message: Host CPU type is not compatible with Cluster Properties I know this CPU support VT-x and it's enable in bios. I tested it with KVM and virt-manager and i saw Qemu/KVM when i try to add new virtual machine. Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Fedora 17 installation problem with Ovirt
Hi I'm trying to install Fedora 17 x86_64 under Ovirt this week. It stays on the starting shell on hvc0. I changed kernel boot parameters and used various parameters. but whit no success. anyone has any idea? I installed other linux very well. I test installation of Fedora 17 with KVM under Fedora 16 without any problem. I used Ovirt and vdsm under CentOS 6.2 Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Fedora 17 installation problem with Ovirt
I tried to install Fedora 16 and Fedora 15 and both of them was ok. but i have problem with Fedora 17 and in all of the my test, it report same error that i said on the first email. Thanks ov...@qip.ru wrote on Fri, 08 Jun 2012 22:19:31 +0400: I have the same problem with fedora16 under ovirt, i can't test fedora17 because it is not possible now to install any VM under ovirt 3.1 by CD issue. fedora16 starting only in single mode Птн 08 Июн 2012 19:46:07 +0400, Mohsen Saeedi mohsen.sae...@gmail.com написал: Hi I'm trying to install Fedora 17 x86_64 under Ovirt this week. It stays on the starting shell on hvc0. I changed kernel boot parameters and used various parameters. but whit no success. anyone has any idea? I installed other linux very well. I test installation of Fedora 17 with KVM under Fedora 16 without any problem. I used Ovirt and vdsm under CentOS 6.2 Thanks -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt - double use of PCI Address
Thanks. we should help each other in open source product. I'm trying to work with Ovirt everyday and if i find new problem or bug, i'll send it to lists. I didn't define any pool. as default pool is exist? i make snapshot from my VM and then create new clone based on snapshot. then i try to start new vm. it failed with double of pci address.then i removed new clone VM. then i try to start old VM (that i created snapshot from it) . but i saw it failed too! then i sent email to this lists and you helped me to solve this problem. thanks. Oved Ourfalli ov...@redhat.com wrote on Wed, 06 Jun 2012 03:20:16 -0400 (EDT): Fix is now merged upstream: http://gerrit.ovirt.org/gitweb?p=ovirt-engine.git;a=commit;h=242636a161a1f7ee44bfad2f9a80002b589b685e I verified it on my environment, testing both snapshots and pools. I guess that old VMs you have, that are part of a pool, or were restored from snapshots, can be damaged (as not only the monitors were duplicated, but all the other devices as well, besides disks). Thank you for helping us find the problem, Oved - Original Message - From: "Yair Zaslavsky" yzasl...@redhat.com To: users@ovirt.org Cc: "mohsen saeedi" mohsen.sae...@gmail.com, "Oved Ourfalli" oourf...@redhat.com Sent: Tuesday, June 5, 2012 7:16:12 PM Subject: Re: [Users] Ovirt - double use of PCI Address On 06/05/2012 06:46 PM, Oved Ourfalli wrote: I think that the problem is related to snapshots. I saw that when working with a VM pool, defining some pre-started VMs, then when shutting down a VM then all the devices are created again, which leads to these duplications. Still need to investigate/debug it, on a clean environment, but looks like it is the issue. Oved I would also like to add that maybe its worth to get the XML of the configuration of the snapshot. This information is stored as "text" under the vm_configuration column of "snapshots" table. You will always have an "active" snapshot - this is not the snapshot you're interested at, simply query the snapshots table according to the snapshot description, and you will have the OVF that describes the VM when the snapshot was created. I wonder if the OVF is correctly kept at the snapshot (just suggesting another point of investigation) Yair - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org, "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:34:18 PM Subject: Re: [Users] Ovirt - double use of PCI Address Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? Basically the number of devices should grow or shrink, according to the number of monitors you choose in the VM properties. If it has more then it is a bug. I'll take a look at it. can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Thinking of it, if you don't want 3 devices you can just delete two of the three video contr
Re: [Users] Ovirt - double use of PCI Address
Oved Ourfalli ov...@redhat.com wrote on Wed, 06 Jun 2012 05:03:28 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org, "Yair Zaslavsky" yzasl...@redhat.com Sent: Wednesday, June 6, 2012 11:24:14 AM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. we should help each other in open source product. I'm trying to work with Ovirt everyday and if i find new problem or bug, i'll send it to lists. I didn't define any pool. as default pool is exist? No. But pool uses snapshots for stateless VMs, and that's where I originally reproduced the problem. oh. yes. I saw stateless but what is the meaning of stateless VMs? I'm sorry to ask a lot of question! Thanks i make snapshot from my VM and then create new clone based on snapshot. then i try to start new vm. it failed with double of pci address.then i removed new clone VM. then i try to start old VM (that i created snapshot from it) . but i saw it failed too! then i sent email to this lists and you helped me to solve this problem. thanks. Oved Ourfalli ov...@redhat.com wrote on Wed, 06 Jun 2012 03:20:16 -0400 (EDT): Fix is now merged upstream: http://gerrit.ovirt.org/gitweb?p=ovirt-engine.git;a=commit;h=242636a161a1f7ee44bfad2f9a80002b589b685e I verified it on my environment, testing both snapshots and pools. I guess that old VMs you have, that are part of a pool, or were restored from snapshots, can be damaged (as not only the monitors were duplicated, but all the other devices as well, besides disks). Thank you for helping us find the problem, Oved - Original Message - From: "Yair Zaslavsky" yzasl...@redhat.com To: users@ovirt.org Cc: "mohsen saeedi" mohsen.sae...@gmail.com , "Oved Ourfalli" oourf...@redhat.com Sent: Tuesday, June 5, 2012 7:16:12 PM Subject: Re: [Users] Ovirt - double use of PCI Address On 06/05/2012 06:46 PM, Oved Ourfalli wrote: I think that the problem is related to snapshots. I saw that when working with a VM pool, defining some pre-started VMs, then when shutting down a VM then all the devices are created again, which leads to these duplications. Still need to investigate/debug it, on a clean environment, but looks like it is the issue. Oved I would also like to add that maybe its worth to get the XML of the configuration of the snapshot. This information is stored as "text" under the vm_configuration column of "snapshots" table. You will always have an "active" snapshot - this is not the snapshot you're interested at, simply query the snapshots table according to the snapshot description, and you will have the OVF that describes the VM when the snapshot was created. I wonder if the OVF is correctly kept at the snapshot (just suggesting another point of investigation) Yair - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:34:18 PM Subject: Re: [Users] Ovirt - double use of PCI Address Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is i
[Users] Ovirt - double use of PCI Address
Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Any idea? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt - double use of PCI Address
Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:01:00 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org Sent: Tuesday, June 5, 2012 4:42:09 PM Subject: Re: [Users] Ovirt - double use of PCI Address /*Oved Ourfalli ov...@redhat.com*/ wrote on Tue, 05 Jun 2012 09:29:19 -0400 (EDT): - Original Message - From: "Mohsen Saeedi"mohsen.sae...@gmail.com To: users@ovirt.org Sent: Tuesday, June 5, 2012 4:24:46 PM Subject: [Users] Ovirt - double use of PCI Address Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Can you please attach the engine.log and vdsm.log files? Yes, I attached both of them. Are you working with the most updated upstream code? I'm working with build from git - faef6297b0d01203e88040b2707f9abfbd754d3f. more information is available here: http://www.dreyou.org/ovirt/ You can see the issue in vdsm.log file. You have 3 video cards, all on the same address. video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video Looking at the vdsm code (in vdsm/libvirtvm.py), you can see why such a thing might happen (also look at the FIXME comment :-) ). # FIXME. We have an identification problem here. # Video card device has not unique identifier, except the alias # (but backend not aware to device's aliases). # So, for now we can only assign the address according to devices order. for vc in self._devices[vm.VIDEO_DEVICES]: if not hasattr(vc, 'address') or not hasattr(vc, 'alias'): vc.alias = alias vc.address = address break # Update vm's conf with address for dev in self.conf['devices']: if (dev['type'] == vm.VIDEO_DEVICES) and \ (not dev.get('address') or not dev.get('alias')): dev['address'] = address dev['alias'] = alias break The code above is responsible to return the engine core the device addresses, after libvirt executes the VM, so that they will be persistent, and used in future executions of the VM. Now, the engine core is aware of the alias (as of the exact commit you used :-) ), but the first time you run the VM, you can get the addresses wrong, as the alias isn't taken into account. Would you like to try to fix this issue? The fix will be to make a better logic in the code above. Similar examples can be found in this file, for example in the section that does the same for controllers. If not, let me know and I'll go ahead and fix that. In the meantime, you can workaround this issue by going to the vm_device table, identifying these three devices, leave the address as is for the first video card of your VM (you probably have video0/1/2 as aliases), and try to run the VM again. Now, the engine will pass the one with the correct address as the first, and libvirt will allocate the right addresses to the other two. Hopefully this will be enough. Oved We had an issue with the monitors, in which the order of the monitor devices is important, as the first one needs to get the address 0:0:2.0, but that issue was fixed. Are you using more than one monitor? No, I'm using spice or vnc just for getting
Re: [Users] Ovirt - double use of PCI Address
Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org, "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? Basically the number of devices should grow or shrink, according to the number of monitors you choose in the VM properties. If it has more then it is a bug. I'll take a look at it. can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Thinking of it, if you don't want 3 devices you can just delete two of the three video controllers in order to workaround the issue. In order to do that you'll have to do the following in the database: 1. Find the vm_id of your VM. You can do that by looking at the vm_static table. 2. Then, in the vm_device table, find the video devices. 3. Delete two of the three devices. Let me know if you need more help. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:01:00 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org Sent: Tuesday, June 5, 2012 4:42:09 PM Subject: Re: [Users] Ovirt - double use of PCI Address /*Oved Ourfalli ov...@redhat.com */ wrote on Tue, 05 Jun 2012 09:29:19 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: users@ovirt.org Sent: Tuesday, June 5, 2012 4:24:46 PM Subject: [Users] Ovirt - double use of PCI Address Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Can you please attach the engine.log and vdsm.log files? Yes, I attached both of them. Are you working with the most updated upstream code? I'm working with build from git - faef6297b0d01203e88040b2707f9abfbd754d3f. more information is available here: http://www.dreyou.org/ovirt/ You can see the issue in vdsm.log file. You have 3 video cards, all on the same address. video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video video address domain="0x" function="0x0" slot="0x02" type="pci" bus="0x00"/ model heads="1" type="qxl" vram="65536"/ /video Looking at the vdsm code (in vdsm/libvirtvm.py), you can see why such a thing might happen (also look at the FIXME comment :-) ). # FIXME. We have an identification problem here. # Video card device has not unique identifier, except the alias
Re: [Users] Ovirt - double use of PCI Address
Yes. I agree too with your idea. I had this problem just when i create snapshot from CentOS. and then i try to start origin virtual machine and new clone. both of them send the same error double use of PCI Address. Thanks Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 11:46:21 -0400 (EDT): I think that the problem is related to snapshots. I saw that when working with a VM pool, defining some pre-started VMs, then when shutting down a VM then all the devices are created again, which leads to these duplications. Still need to investigate/debug it, on a clean environment, but looks like it is the issue. Oved - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org, "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:34:18 PM Subject: Re: [Users] Ovirt - double use of PCI Address Ok. thanks. I'm trying to do all of the under my home server with Ovirt. I'll update you about any problem in this case. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 11:20:03 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 6:10:30 PM Subject: Re: [Users] Ovirt - double use of PCI Address Hi Again I just defined new server on Ovirt admin portal. I think define monitor is for desktop virtualization. is it true? I switched more than two time between spice and vnc. do you think switching between vnc and spice is the reason for this problem? And did the problem occur? Trying to reproduce it now and I can't, although I seem to have some VMs with more than one monitor in the vm_device table, but all have this property set to 1. I'll update you in case I understand the reason. If you have a solid reproduction then please share it. Thank you, Oved I'm going to delete extra video card. but it's very interesting for me to know about reason of this problem. Thanks Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:16:07 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org , "Igor Lvovsky" ilvov...@redhat.com Sent: Tuesday, June 5, 2012 5:06:55 PM Subject: Re: [Users] Ovirt - double use of PCI Address Thanks. But i didn't add 3 video card! why there is 3 video card?is it bug? Basically the number of devices should grow or shrink, according to the number of monitors you choose in the VM properties. If it has more then it is a bug. I'll take a look at it. can you please explain more about how can i fix this problem? i must go to the database and then i leave the address as is? i don't understand last your sentence. Thanks for you attention. Thinking of it, if you don't want 3 devices you can just delete two of the three video controllers in order to workaround the issue. In order to do that you'll have to do the following in the database: 1. Find the vm_id of your VM. You can do that by looking at the vm_static table. 2. Then, in the vm_device table, find the video devices. 3. Delete two of the three devices. Let me know if you need more help. Oved Ourfalli ov...@redhat.com wrote on Tue, 05 Jun 2012 10:01:00 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Oved Ourfalli" ov...@redhat.com Cc: users@ovirt.org Sent: Tuesday, June 5, 2012 4:42:09 PM Subject: Re: [Users] Ovirt - double use of PCI Address /*Oved Ourfalli ov...@redhat.com */ wrote on Tue, 05 Jun 2012 09:29:19 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: users@ovirt.org Sent: Tuesday, June 5, 2012 4:24:46 PM Subject: [Users] Ovirt - double use of PCI Address Hi I setup ovirt and some other things. I make a virtual machine (CentOS 6.2). installed and configured it. then power off it and make a snapshot and create clone image from it. when i trying to start new machine, i got this error: 2012-06-05 13:16:15.433+: 2375: error : qemuCollectPCIAddress:743 : XML error: Attempted double use of PCI Address '0:0:2.0' I remove the new machine and try to start old machine. i get the error again! and i'm enable to start old machine. Can you please attach the engine.log and vdsm.log files? Yes, I attached both of them. Are you working with the most updated upstream code? I'm working with build from git - faef6297b0d01203e88040b2707f9abfbd754d3f. more information is available here: http://www.dreyou.org/ovirt/ You can see the issue in vdsm.log file. You have 3 video cards, all on the same address. video address domain="0x" function=&qu
Re: [Users] Failed to start VM
Hi again I used the following command and it worked for me! great psql engine -U postgres -c "UPDATE vdc_options set option_value = 'rhel6.2.0' where option_name = 'EmulatedMachine'" but why? I want to know about this problem concept. I know about psql command. Itamar Heim ih...@redhat.com wrote on Thu, 26 Apr 2012 10:06:39 +0300: On 04/26/2012 09:19 AM, Mohsen Saeedi wrote: Hi I setup ovirt with vdsm on the CentOS 6.2 x64 . I configured anything correctly. I defined ISO Domain and Data Domain for iso file and virtual machine file under NFS storage. I made new virtual server with CentOS 6.2 x64 and assigned redhat 6.2 x64 as linux type. But when i start VM it failed to start. I read libvirtd log and it write a error on libvirtd.log: 2012-04-25 21:04:59.952+: 1705: error : qemuProcessReadLogOutput:1005 : internal error Process exited while reading console log output: Supported machines are: pc RHEL 6.2.0 PC (alias of rhel6.2.0) rhel6.2.0 RHEL 6.2.0 PC (default) rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC What is the problem. I'm experience user on RHEL with 10 more years work as administrator and i have good knowledge about KVM and virt manager but i'm semi-pro on ovrit! Thanks for help ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users look at EmulatedMachine parameter: http://lists.ovirt.org/pipermail/users/2012-January/000278.html http://www.ovirt.org/wiki/User:Lhornyak http://ovirt.org/wiki/Engine_Node_Integration http://gerrit.ovirt.org/#change,3893 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Failed to start VM
Thanks. but i have another problem. I changed attach cd but i got error when ovirt trying to updagte VM! 2012-04-26 18:08:55.451+: 1629: error : virNetSocketReadWire:911 : End of file while reading data: Input/output error 2012-04-26 18:43:53.498+: 1636: error : qemuMonitorJSONCheckError:318 : internal error unable to execute QEMU command 'change': Device 'drive-ide0-1-0' is locked 2012-04-26 18:45:35.922+: 1633: warning : qemuDomainObjTaint:1123 : Domain id=4 name='Fedora' uuid=98ef9d18-b74a-4ef5-884b-34ca32a2a2b0 is tainted: custom-monitor It's unable to eject cd. what's the solution? and another question is where can i get the patch you told in your answer? i didn't see any file or link. Thanks. Andrew Cathrow acath...@redhat.com wrote on Thu, 26 Apr 2012 15:00:43 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Itamar Heim" ih...@redhat.com Cc: users@ovirt.org Sent: Thursday, April 26, 2012 2:53:01 PM Subject: Re: [Users] Failed to start VM Hi again I used the following command and it worked for me! great psql engine -U postgres -c "UPDATE vdc_options set option_value = 'rhel6.2.0' where option_name = 'EmulatedMachine'" but why? I want to know about this problem concept. I know about psql command. We need a stable machine type to ensure migration, you can have different qemu-kvm versions on different hosts but as long as they support the same stable machine type they will have compatibility for migration. The setting which you set in database (but see patch below to make it a config option) allows you to specify the required machine type. Fedora uses machine types like pc-0.15 pc-0.14 pc-1.0 where as RHEL users different machine types. Itamar Heim ih...@redhat.com wrote on Thu, 26 Apr 2012 10:06:39 +0300: On 04/26/2012 09:19 AM, Mohsen Saeedi wrote: Hi I setup ovirt with vdsm on the CentOS 6.2 x64 . I configured anything correctly. I defined ISO Domain and Data Domain for iso file and virtual machine file under NFS storage. I made new virtual server with CentOS 6.2 x64 and assigned redhat 6.2 x64 as linux type. But when i start VM it failed to start. I read libvirtd log and it write a error on libvirtd.log: 2012-04-25 21:04:59.952+: 1705: error : qemuProcessReadLogOutput:1005 : internal error Process exited while reading console log output: Supported machines are: pc RHEL 6.2.0 PC (alias of rhel6.2.0) rhel6.2.0 RHEL 6.2.0 PC (default) rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC What is the problem. I'm experience user on RHEL with 10 more years work as administrator and i have good knowledge about KVM and virt manager but i'm semi-pro on ovrit! Thanks for help ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users look at EmulatedMachine parameter: http://lists.ovirt.org/pipermail/users/2012-January/000278.html http://www.ovirt.org/wiki/User:Lhornyak http://ovirt.org/wiki/Engine_Node_Integration http://gerrit.ovirt.org/#change,3893 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Failed to start VM
what is the solution for complete unmount older CD and attach new cd to VM? Andrew Cathrow acath...@redhat.com wrote on Thu, 26 Apr 2012 15:13:56 -0400 (EDT): - Original Message - From: "Andrew Cathrow" acath...@redhat.com To: "Mohsen Saeedi" mohsen.sae...@gmail.com Cc: users@ovirt.org, "Itamar Heim" ih...@redhat.com Sent: Thursday, April 26, 2012 3:13:43 PM Subject: Re: [Users] Failed to start VM - Original Message ----- From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Andrew Cathrow" acath...@redhat.com Cc: users@ovirt.org, "Itamar Heim" ih...@redhat.com Sent: Thursday, April 26, 2012 3:05:00 PM Subject: Re: [Users] Failed to start VM Thanks. but i have another problem. I changed attach cd but i got error when ovirt trying to updagte VM! 2012-04-26 18:08:55.451+: 1629: error : virNetSocketReadWire:911 : End of file while reading data: Input/output error 2012-04-26 18:43:53.498+: 1636: error : qemuMonitorJSONCheckError:318 : internal error unable to execute QEMU command 'change': Device 'drive-ide0-1-0' is locked 2012-04-26 18:45:35.922+: 1633: warning : qemuDomainObjTaint:1123 : Domain id=4 name='Fedora' uuid=98ef9d18-b74a-4ef5-884b-34ca32a2a2b0 is tainted: custom-monitor It's unable to eject cd. what's the solution? and another question is where can i get the patch you told in your answer? i didn't see any file or link. Last link at the bottom - http://gerrit.ovirt.org/#change,3893 well, that's part of a series of changes ... Thanks. Andrew Cathrow acath...@redhat.com wrote on Thu, 26 Apr 2012 15:00:43 -0400 (EDT): - Original Message - From: "Mohsen Saeedi" mohsen.sae...@gmail.com To: "Itamar Heim" ih...@redhat.com Cc: users@ovirt.org Sent: Thursday, April 26, 2012 2:53:01 PM Subject: Re: [Users] Failed to start VM Hi again I used the following command and it worked for me! great psql engine -U postgres -c "UPDATE vdc_options set option_value = 'rhel6.2.0' where option_name = 'EmulatedMachine'" but why? I want to know about this problem concept. I know about psql command. We need a stable machine type to ensure migration, you can have different qemu-kvm versions on different hosts but as long as they support the same stable machine type they will have compatibility for migration. The setting which you set in database (but see patch below to make it a config option) allows you to specify the required machine type. Fedora uses machine types like pc-0.15 pc-0.14 pc-1.0 where as RHEL users different machine types. Itamar Heim ih...@redhat.com wrote on Thu, 26 Apr 2012 10:06:39 +0300: On 04/26/2012 09:19 AM, Mohsen Saeedi wrote: Hi I setup ovirt with vdsm on the CentOS 6.2 x64 . I configured anything correctly. I defined ISO Domain and Data Domain for iso file and virtual machine file under NFS storage. I made new virtual server with CentOS 6.2 x64 and assigned redhat 6.2 x64 as linux type. But when i start VM it failed to start. I read libvirtd log and it write a error on libvirtd.log: 2012-04-25 21:04:59.952+: 1705: error : qemuProcessReadLogOutput:1005 : internal error Process exited while reading console log output: Supported machines are: pc RHEL 6.2.0 PC (alias of rhel6.2.0) rhel6.2.0 RHEL 6.2.0 PC (default) rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC What is the problem. I'm experience user on RHEL with 10 more years work as administrator and i have good knowledge about KVM and virt manager but i'm semi-pro on ovrit! Thanks for help ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users look at EmulatedMachine parameter: http://lists.ovirt.org/pipermail/users/2012-January/000278.html http://www.ovirt.org/wiki/User:Lhornyak http://ovirt.org/wiki/Engine_Node_Integration http://gerrit.ovirt.org/#change,3893 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users