[ovirt-users] Re: Node 4.4.1 gluster bricks

2020-09-25 Thread Staniforth, Paul
September 2020 18:28 To: Users ; Staniforth, Paul Subject: Re: [ovirt-users] Node 4.4.1 gluster bricks Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. >1 node I wiped it clean and the other I left the 3 glus

[ovirt-users] Re: Node 4.4.1 gluster bricks

2020-09-25 Thread Staniforth, Paul
It's a clean disk, already did a wipefs -a /dev/sdb did a partprobe and checked using blkid to make sure all the multipath elements we seeing the clean disk. From: Jayme Sent: 25 September 2020 17:09 To: Staniforth, Paul Cc: Users Subject: Re: [ovirt-users

[ovirt-users] Node 4.4.1 gluster bricks

2020-09-25 Thread Staniforth, Paul
Hello, how do you manage a gluster host when upgrading a node? I upgraded/replaced 2 nodes with the new install and can't recreate any gluster bricks. 1 node I wiped it clean and the other I left the 3 gluster brick drives untouched. If I try to create bricks using the UI on the

[ovirt-users] Re: LDAP/AD issue

2020-08-26 Thread Staniforth, Paul
Hi Kim, it will be using the engine hosts DNS configuration to find the service record, is it in stud.noroff.no or one of the other domains? you can check with "dig _ldap._tcp.example.com SRV" DNS and Active directory domains aren't the same thing. there are examples of

[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Staniforth, Paul
Geldenhuys Cc: Staniforth, Paul ; users@ovirt.org Subject: Re: [ovirt-users] Re: affinity/pool/fencing ? Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. You might find affinity labels are a better fit in this use

[ovirt-users] Re: affinity/pool/fencing ?

2020-07-28 Thread Staniforth, Paul
Hello Nar, you can achieve this with 2 affinity rules, a positive and negative one. In the cluster create the first affinity group VM affinity rule disabled HOST affinity rule positive set enforcing mode. Then add the VMs and 2 Hosts to force them to run on these hosts. In

[ovirt-users] Re: ETL service aggregation error

2020-06-27 Thread Staniforth, Paul
/#chap-Backups_and_Migration Regards, Paul S. From: Ayansh Rocks Sent: 27 June 2020 06:42 To: Staniforth, Paul Cc: users ; de...@ovirt.org Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External Mail: Do not click any links

[ovirt-users] Re: ETL service aggregation error

2020-06-25 Thread Staniforth, Paul
-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf for settings. Regards, Paul S. From: Ayansh Rocks Sent: 25 June 2020 10:40 To: Staniforth, Paul ; users Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External

[ovirt-users] Re: ETL service aggregation error

2020-06-24 Thread Staniforth, Paul
Paul S. . From: Ayansh Rocks Sent: 24 June 2020 12:47 To: Staniforth, Paul ; users Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that t

[ovirt-users] Re: oVirt noVNC

2020-06-12 Thread Staniforth, Paul
bundles for both systems? Regards, Paul S. From: Anton Louw Sent: 12 June 2020 11:44 To: Staniforth, Paul ; users@ovirt.org Subject: RE: oVirt noVNC Caution External Mail: Do not click any links or open any attachments unless you trust

[ovirt-users] Re: oVirt noVNC

2020-06-12 Thread Staniforth, Paul
.pem * Save your CA certificate as /etc/pki/ovirt-engine/apache-ca.pem. # cp /tmp/3rd-party-ca-cert.pem /etc/pki/ovirt-engine/apache-ca.pem Regards, Paul S. From: Anton Louw Sent: 12 June 2020 11:06 To: Staniforth, Paul ; users@ovirt

[ovirt-users] Re: oVirt noVNC

2020-06-12 Thread Staniforth, Paul
No worries, If all is pointing to the correct files I would check permissions. Regards, Paul S. From: Anton Louw Sent: 12 June 2020 09:34 To: Staniforth, Paul ; users@ovirt.org Subject: RE: oVirt noVNC Caution External

[ovirt-users] Re: oVirt noVNC

2020-06-12 Thread Staniforth, Paul
Hello Anton, if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA. https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html Paul S. From: Anton Louw via Users

[ovirt-users] Re: ETL service aggregation error

2020-06-04 Thread Staniforth, Paul
Hello Shashank, I can't see any of your images and also it would be better to have the log file as text. Regards, Paul S. From: Ayansh Rocks Sent: 04 June 2020 15:16 To: users Subject: [ovirt-users] Re: ETL

[ovirt-users] Re: AutoStart VMs (was Re: Re: oVirt 4.4.0 Release is now generally available)

2020-05-27 Thread Staniforth, Paul
Thanks Derek, GitHub or GitLab probably. Regards, Paul S. From: Derek Atkins Sent: 27 May 2020 15:50 To: Gianluca Cecchi Cc: tho...@hoberg.net ; users Subject: [ovirt-users] AutoStart VMs (was Re: Re: oVirt 4.4.0 Release

[ovirt-users] Re: Node Unresponsive

2020-05-07 Thread Staniforth, Paul
Hi Anton, should be yum instead of dnf as it using centos7 Regards, Paul S. From: Anton Louw via Users Sent: 07 May 2020 15:22 To: Artur Socha ; users@ovirt.org Subject: [ovirt-users] Re: Node Unresponsive Caution External

[ovirt-users] Re: Node Unresponsive

2020-05-07 Thread Staniforth, Paul
Hi Anton, I wasn't considering the hosted-engine just in the engine VM systemctl restart ovirt-engine.service Regards, Paul S. From: Artur Socha Sent: 07 May 2020 14:54 To: Anton Louw ; users@ovirt.org Subject: [ovirt-users]

[ovirt-users] Re: User Groups

2020-04-29 Thread Staniforth, Paul
Hello Anton, In the Administration->Users there is a groups button. Regards, Paul S. From: Anton Louw Sent: 29 April 2020 06:36 To: users@ovirt.org Subject: [ovirt-users] User Groups Caution External Mail: Do not click any

[ovirt-users] Re: assign a specific user to a specific vm

2020-04-17 Thread Staniforth, Paul
ul S. From: eev...@digitaldatatechs.com Sent: 17 April 2020 15:42 To: Staniforth, Paul ; users@ovirt.org Subject: RE: [ovirt-users] Re: assign a specific user to a specific vm Caution External Mail: Do not click any links or open any attachments unless you trust the se

[ovirt-users] Re: assign a specific user to a specific vm

2020-04-17 Thread Staniforth, Paul
Sent: 17 April 2020 15:28 To: Staniforth, Paul ; users@ovirt.org Subject: RE: [ovirt-users] Re: assign a specific user to a specific vm Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. You said: “set

[ovirt-users] Re: assign a specific user to a specific vm

2020-04-17 Thread Staniforth, Paul
Hello Eric, It sounds like you have permissions set to a group at some level, these are hierarchical system->datacenter->cluster->VM if you remove this permission and then set the userrole for the VM they should only be allowed to run this VM. Regards, Paul

[ovirt-users] Re: VM's in status unknown

2020-04-17 Thread Staniforth, Paul
I don't think the status is reported via the agent but vdsm on the host. Try restarting the engine service. use vdsm-client on the host to see if the VM running and shut it down if needed. https://www.ovirt.org/develop/developer-guide/vdsm/vdsm-client.html on the host restart vdsmd ( you may

[ovirt-users] Re: Multiple NICs on hosted engine, oVirt 4.3

2020-04-06 Thread Staniforth, Paul
to change it to (for example) /etc/ovirt-hosted-engine/vm.conf and modify that file there? Is it safe for further updates, maintenance, etc.? Maybe the second question - which process creates vm.conf in /var/run path? Cheers, Jiri On 4/5/20 8:35 AM, Staniforth, Paul wrote: > Hello

[ovirt-users] Re: Multiple NICs on hosted engine, oVirt 4.3

2020-04-05 Thread Staniforth, Paul
Hello Jri, The configurations local and shared are managed by hosted-engine command. https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/administration_guide/chap-administering_the_self-hosted_engine

[ovirt-users] Re: Local network

2020-03-31 Thread Staniforth, Paul
.Hello Tommaso, on your oVirt engine host run check the north bridge controller ovn-nbctl show this should show a software switch for each ovn logical network witch any ports that are active( in your case you should have 2) check the south bridge controller ovn-sbctl

[ovirt-users] Re: Local network

2020-03-31 Thread Staniforth, Paul
The engine runs the controller so ovn-sbctl won't work, on the hosts, use ovs-vsctl show Paul S. From: Tommaso - Shellrent Sent: 31 March 2020 12:13 To: Staniforth, Paul ; users@ovirt.org Subject: Re: [ovirt-users] Local network Caution External Mail: Do

[ovirt-users] Re: bare-metal to self-hosted engine

2020-03-27 Thread Staniforth, Paul
Hello Kim, as it says in the documentation a SHE setup is more complex to maintain, see the following about upgrades, configuration changes and backups.

[ovirt-users] Re: Client separation on bridge level

2020-03-16 Thread Staniforth, Paul
Can't you put then on separate VLANs? Regards, Paul S. From: Hendrik Peyerl Sent: 16 March 2020 09:24 To: users@ovirt.org Subject: [ovirt-users] Client separation on bridge level Caution External Mail: Do not click any links or open any

[ovirt-users] Re: oVirt Storage quota problems

2020-03-13 Thread Staniforth, Paul
Sorry haven't used quota in a while, one thought is there a template quota getting used? Regards, Paul S. From: Vrgotic, Marko Sent: 13 March 2020 15:15 To: Staniforth, Paul ; users@ovirt.org Cc: Stojchev, Darko Subject: Re: oVirt Storage

[ovirt-users] Re: Changing the Data Warehouse Sampling Scale

2020-03-04 Thread Staniforth, Paul
Hello Anton, you can also manually do this edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf run systemctl restart ovirt-engine-dwhd.service if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a

[ovirt-users] Re: Ovirt API and CLI

2020-02-27 Thread Staniforth, Paul
Hi Eugène can't you use ansible add-hoc commands ? for a common cli to (libvirt, KubeVirt, oVirt, OpenStack, VMware vSphere, GCP and AWS) you could try kcli https://github.com/karmab/kcli/blob/master/doc/index.md ( although I haven't tried it yet). Regards, Paul S.

[ovirt-users] Re: Move Self Hosted Engine to Standalone

2020-02-18 Thread Staniforth, Paul
Hi Jeremy, I think you must have run the engine-setup before the restore, the restore is designed to restore to a clean install or the previous install with the same credentials. If you delete the postgresql config you can then install with your postgres credentials. e.g.

[ovirt-users] Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version

2020-02-06 Thread Staniforth, Paul
Has this bug come back engine.log flooded with "Field 'foo' can not be updated when status is 'Up'" https://lists.ovirt.org/archives/list/users@ovirt.org/thread/MKFQRCKHRT6NJUHF7URJTQG753MND6PJ/?sort=date Regards, Paul S. From: Florian Schmid Sent: 06 February

[ovirt-users] Re: Websocket-proxy not working after upgrade to 4.3

2020-02-05 Thread Staniforth, Paul
What does this show engine-config -g WebSocketProxy should be :6100 if not try setting it with engine-config -s WebSocketProxy=:6100 then restarting the engine. Regards, Paul S. From: Gianluca Cecchi Sent: 05 February 2020 13:57 To: Nicolás

[ovirt-users] Re: new glance server

2020-02-04 Thread Staniforth, Paul
The pike packages are at http://vault.centos.org/ Regards, Paul S. From: Tommaso - Shellrent Sent: 04 February 2020 16:25 To: users@ovirt.org Subject: [ovirt-users] new glance server Caution External Mail: Do not click any links or open any

[ovirt-users] Re: Problems in new oVirt install

2020-01-29 Thread Staniforth, Paul
Yes that's what usually happens the VM will be paused when the backing storage starts running out of space, try deleting the ISO from where you uploaded it to. Regards, Paul S. From: Steve Watkins Sent: 29 January 2020 00:13 To: users@ovirt.org Subject:

[ovirt-users] Re: Windows Server Migration from Proxmox

2020-01-28 Thread Staniforth, Paul
Hello, it may be a driver problem, try changing the disk interface to IDE, if that boots install the virtio drivers and remove any Proxmox drivers, Regards, Paul S. From: Robert Webb Sent: 27 January 2020 20:33 To: users Subject:

[ovirt-users] Re: command line vm start/stop

2020-01-27 Thread Staniforth, Paul
Hello, you could use ansible or for a common cli to (libvirt, KubeVirt, oVirt, OpenStack, VMware vSphere, GCP and AWS) you could try kcli https://github.com/karmab/kcli/blob/master/doc/index.md ( although I haven't tried it yet). Regards, Paul S.

[ovirt-users] Re: KVM (libvirt) VM Import

2020-01-23 Thread Staniforth, Paul
Hi, Have you enable public key authentication between your proxy host and KVM host? Does the proxy host have v2v installed? https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html

[ovirt-users] Re: oVirt on a Single Server

2020-01-22 Thread Staniforth, Paul
Hello Matt, probably the easiest setup to test/evaluate oVirt it to use ORB https://www.ovirt.org/documentation/ovirt-orb/ oVirt Orb | oVirt oVirt is a free open-source virtualization solution for your entire enterprise

[ovirt-users] Re: upgrade issue

2020-01-16 Thread Staniforth, Paul
anuary 2020 18:25 To: Staniforth, Paul ; Parth Dhanjal Cc: users Subject: Re: [ovirt-users] Re: upgrade issue Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Paul, Thanks for your reply. I did install

[ovirt-users] Re: upgrade issue

2020-01-15 Thread Staniforth, Paul
Hi Jingjie, If you have a node installed using ovirt-node-ng it created a thin LVM pool and ovirt-node-ng-image-update creates a new LVM layer so you have 2 versions of the node that you can switch between. Regards, Paul S.

[ovirt-users] Re: upgrade issue

2020-01-15 Thread Staniforth, Paul
Hello Jingjie, I think you need to install

[ovirt-users] Re: ovirt-provider-ovn external network provider

2020-01-14 Thread Staniforth, Paul
. From: Dominik Holler Sent: 14 January 2020 16:23 To: Staniforth, Paul Cc: users ; Miguel Duarte de Mora Barroso Subject: Re: [ovirt-users] ovirt-provider-ovn external network provider Caution External Mail: Do not click any links or open any attachments unless you

[ovirt-users] Re: null

2020-01-06 Thread Staniforth, Paul
Hi, if you have a network in the cluster that is set to required any hosts in the cluster will become non-operational if it's isn't available. You can set the logical network not to be required while testing or if it isn't essential. Regards, Paul S.

[ovirt-users] Re: ovirt vdsm and networking

2019-12-13 Thread Staniforth, Paul
Hi Kim, you should be able to from the admin portal for the interfaces of your hosts go into setup host networks and change the boot protocol for your student network to manual or dhcp. If you don't want your student VMs having network access to your hosts you could configure a

[ovirt-users] Re: katello-host-tools-3.5.1 and Red Hat Satellite 6.4

2019-12-11 Thread Staniforth, Paul
Hello Matthias, The oVirt hosts need to be registered in redhat satellite as a content host and the satellite host will need to have the centos and oVirt yum repositories added so they can create a content view. The first step I would do is ask whoever manages your satellite server if they are

[ovirt-users] Re: Clusters: Clarification needed on the ballooning memory feature and its affects on the physical hosts memory

2019-12-10 Thread Staniforth, Paul
Hello Donagh, memory size e.g. 62000MB is the memory the VM tells the O/S is available you should be able to see how much is actually used if the agent is installed. maximum memory e.g. 248000MB is the amount you can hot-plug for the VM

[ovirt-users] Re: Hyper-V to KVM | v2v

2019-12-06 Thread Staniforth, Paul
Hello Vijay, as the error suggests Windows 8 onward defaults to not doing a full shutdown but fast boot, this is why in Windows troubleshooting it's suggested to do a reboot as this does a full shutdown then boot. You should probably disable fast-boot on the Windows guest.

[ovirt-users] Re: Importing a Virtual Machine from a KVM Host

2019-12-06 Thread Staniforth, Paul
Hello Dirk, The link you are using is old developer docs, try the following. https://www.ovirt.org/documentation/admin-guide/chap-External_Providers.html You need to setup an external provider and use a proxy host in the datacentre (not the engine host) you want to import into, this needs to be

[ovirt-users] Re: restore

2019-11-12 Thread Staniforth, Paul
As you did a full backup including the data warehouse you need engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --provision-dwh-db --restore-permissions see https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration.html Backups and Migration |

[ovirt-users] Re: When I log in ovirt-engine , it show "Unable to log in because the user account is disabled or locked. Contact the system administrator."

2019-11-11 Thread Staniforth, Paul
You can use the following command. ovirt-aaa-jdbc-tool user unlock test1 https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html Regards, Paul S. From: wangyu13476969...@126.com Sent: 11 November 2019 09:05 To: users@ovirt.org

[ovirt-users] Re: After importing the ovirt-engine 4.3.5 backup file into ovirt-engine 4.3.6, will the information of the ovirt-engine 4.3.6 management interface be the same as ovirt-engine 4.3.5?

2019-11-11 Thread Staniforth, Paul
Thanks, I should have been clearer, what I meant was could you install 4.3.5 and restore to that, then run engine-setup --offline? Regards, Paul S. From: Yedidyah Bar David Sent: 11 November 2019 10:19 To: Staniforth, Paul Cc

[ovirt-users] Re: After importing the ovirt-engine 4.3.5 backup file into ovirt-engine 4.3.6, will the information of the ovirt-engine 4.3.6 management interface be the same as ovirt-engine 4.3.5?

2019-11-11 Thread Staniforth, Paul
I haven't tried it but doesn't engine-setup --offline stop it upgrading minor releases. Regards, Paul S. From: Yedidyah Bar David Sent: 11 November 2019 07:57 To: wangyu13476969...@126.com Cc: users Subject: [ovirt-users] Re: After importing

[ovirt-users] Re: Quick question regarding FQDN

2019-11-11 Thread Staniforth, Paul
Hello Christian, That recommendation is for the hyper-converged installation as the nodes are also the storage servers so you would choose the storage addresses when setting up the gluster network. The other thing is you may have to setup a display network proxy if your

[ovirt-users] Re: Quick generic Questions

2019-11-07 Thread Staniforth, Paul
Hello Christian, here are some useful links https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide.html https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infrastructure_for_virtualization/1.6/ You need to have at least 1 device for the O/S

[ovirt-users] Re: Bridge issue

2019-10-11 Thread Staniforth, Paul
Maybe obvious but have you set the firewall on Win10 to allow pings ( it defaults to blocking them). Regards, Paul S. From: con_lo...@hotmail.com Sent: 11 October 2019 09:37 To: users@ovirt.org Subject: [ovirt-users] Re: Bridge issue Hello

[ovirt-users] Re: Move Hosted Engine to external oVirt or VMware

2019-10-11 Thread Staniforth, Paul
https://ovirt.org/documentation/self-hosted/chap-Backing_up_and_Restoring_an_EL-Based_Self-Hosted_Environment.html Chapter 7: Backing up and Restoring an EL-Based Self-Hosted Environment -

[ovirt-users] Re: Trying to add a LUN to a host and use that, instead of Gluster, as the datastore for my VM's.

2019-10-10 Thread Staniforth, Paul
I think you should be able create a gluster volume from the local LUN on each server and use these to create 2 storage domains. They should then be shared storage but not replicated so if a host goes down you will loose that domain. Maybe you will need to alter the fencing policy? Regards,

[ovirt-users] Re: Upgrading from oVirt-Node 4.2.8 to latest

2019-10-09 Thread Staniforth, Paul
I don't know if it's documented but you need add the 4.3 repo to the yum configuration on the nodes. Regards, Paul S. From: Sven Achtelik Sent: 09 October 2019 09:48 To: users Subject: [ovirt-users] Upgrading from oVirt-Node 4.2.8 to latest

[ovirt-users] Re: Creating Bricks via the REST API

2019-09-24 Thread Staniforth, Paul
I had assumed Julian was asking how to create the bricks on the hosts whereas the API only seems to allow you to add bricks that have been created. Regards, Paul S. From: Amit Bawer Sent: 23 September 2019 15:52 To: Julian Schill Cc:

[ovirt-users] FW: user role

2019-09-18 Thread Staniforth, Paul
Hi Kim, If you add them to a group in AD then add the users and group to oVirt you can add the permissions to the group. Then add the VmCreator and DiskProfileUser to the Datacenter. Add the UserTemplateBasedVM permission to any templates you want them to be able to use Add the

[ovirt-users] Re: Changing ISO domains

2019-09-17 Thread Staniforth, Paul
Did you have the correct ownership/permissions ? Regards, Paul S. From: Derek Atkins Sent: 17 September 2019 15:06 To: Mark Steele Cc: users Subject: [ovirt-users] Re: Changing ISO domains On Tue, September 17, 2019 9:58 am, Mark Steele

[ovirt-users] oVirt 4.3 gluster hooks

2019-09-17 Thread Staniforth, Paul
Hello, In an oVirt 4.3 cluster there are a number of gluster hooks out of sync. When I try to resolve any of the conflicts from the engine it comes back with operation cancelled with the error message "Error while executing action Update Gluster Hook: Internal Engine Error" In

[ovirt-users] Re: Virt-Viewer issue

2019-09-16 Thread Staniforth, Paul
Hello, you should use remote-viewer, it's part of the virt-viewer package. Paul Staniforth School of Built Environment Engineering and Computing. Leeds Beckett University Networked Systems Analyst, Research and Engineering Support. tel: +44 (0)113 28123754 email:

[ovirt-users] Re: Custum driver in oVirt node image?

2019-08-21 Thread Staniforth, Paul
Hello Thomas, The following shows how to enable Ethtool https://ovirt.org/documentation/admin-guide/appe-Custom_Network_Properties.html Regards, Paul S. From: tho...@hoberg.net Sent: 19 August 2019 08:59 To:

[ovirt-users] Re: engine.log flooded with "Field 'foo' can not be updated when status is 'Up'"

2019-08-20 Thread Staniforth, Paul
ope it's linked to unfinished VM "Custom Compatibility Version" updates, tomorrow I'll know, when I finally can do the last VM reboots. My "Administration Portal" is still usable, but nevertheless I think this is something the upstream developers should look into. Regards Matt

[ovirt-users] Re: Need to enable STP on ovirt bridges

2019-08-19 Thread Staniforth, Paul
I haven't used FC with oVirt but in the following it shows the bridge options available and how to enable Ethtool and FCoE. https://ovirt.org/documentation/admin-guide/appe-Custom_Network_Properties.html Regards, Paul S. From:

[ovirt-users] Re: Evaluate oVirt to remove VMware

2019-08-19 Thread Staniforth, Paul
Hello Allen, In oVirt you can use VLANs and Bonds but not teaming. It may be useful to try a Centos(oVirt uses Centos or RHEL) install to see how the networking works, most notably you add devices that are VLANs or BONDs. I also check that the devices are enables on boot as I

[ovirt-users] Re: ovn networking

2019-08-19 Thread Staniforth, Paul
:09 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] ovn networking On Wed, Aug 14, 2019 at 9:09 AM Staniforth, Paul wrote: > > Hello > > I the latest release of the engine 4.3.5.5-1.el7 > > ovn-nbctl show > > ovn-sbctl show > > &

[ovirt-users] Re: ovirt node install

2019-08-19 Thread Staniforth, Paul
Sorry for the confusion this is with the latest node 4.3.5.2-1.el7 It didn't have this problem in 4.3.4-1 Regards, Paul S. From: Yuval Turgeman Sent: 19 August 2019 16:00 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users

[ovirt-users] Re: Need to enable STP on ovirt bridges

2019-08-19 Thread Staniforth, Paul
on your physical switch. Regards, Paul S. From: Curtis E. Combs Jr. Sent: 19 August 2019 12:39 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] Need to enable STP on ovirt bridges Hi Paul, Thank you very much for the response. However, I

[ovirt-users] ovn networking

2019-08-14 Thread Staniforth, Paul
Hello I the latest release of the engine 4.3.5.5-1.el7 ovn-nbctl show ovn-sbctl show both seem to work but produce the errors net_mlx5: cannot load glue library: libibverbs.so.1: cannot open shared object file: No such file or directory net_mlx5: cannot initialize PMD due to

[ovirt-users] Re: engine.log flooded with "Field 'foo' can not be updated when status is 'Up'"

2019-08-13 Thread Staniforth, Paul
Hello Mathias, I also had this problem, the flood of warning messages was most notably generated when showing all the VMs running from the admin portal dashboard as we had 70 VMs running this generated the following but for all 70 VMs. I was able to restart most of the

[ovirt-users] ovirt node install

2019-08-13 Thread Staniforth, Paul
Hello, on the latest version of the oVirt-node install running nodectl info gives the error Traceback (most recent call last): File "/usr/lib64/python2.7/runpy.py", line 162, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/usr/lib64/python2.7/runpy.py",

[ovirt-users] Re: Either allow 2 CD-ROM's or selectable *.vfd Floppy Images from Storage via Run Once other than from deprcated ISO-Storage

2019-08-13 Thread Staniforth, Paul
You should be able to use DISM to create a slipstream ISO then you could add updates and drivers to this install media. https://www.tenforums.com/tutorials/95008-dism-add-remove-drivers-offline-image.html or use something like https://www.ntlite.com/ Regards, Paul S.

[ovirt-users] Re: Using a synology as an nfs storage

2019-06-28 Thread Staniforth, Paul
Are the user group and permissions set correctly vdsm:kvm? The storage is mounted on the nodes not the engine. have you unmounted the storage after your test? Good Luck, Paul S. From: Andy Michielsen Sent: 28 June 2019 14:12 To: users

[ovirt-users] Re: RDO integration with oVirt

2019-06-27 Thread Staniforth, Paul
I think it would also be nice to have Kubenetes\openshift integration e.g. OKD https://www.okd.io/ as well as RDO. Regards, Paul S. From: Strahil Sent: 27 June 2019 08:13 To: users Subject: [ovirt-users] RDO integration with oVirt Hey

[ovirt-users] Re: HE on single oVirt node

2019-06-26 Thread Staniforth, Paul
Hello Mike, I think the requirements for a gluster node is that it has at least 2 disks one for the O/S and the others for bricks. It doesn't seem to say this in the oVirt prerequisites. Could you reconfigure your raid device to provide LUNS? Regards,

[ovirt-users] Re: Ovirt-egine integration with OpenLDAP can't seem to find any users on Web-UI

2019-05-31 Thread Staniforth, Paul
Possibly firewall? Regards, Paul S. From: rubennune...@gmail.com Sent: 30 May 2019 17:54 To: users@ovirt.org Subject: [ovirt-users] Re: Ovirt-egine integration with OpenLDAP can't seem to find any users on Web-UI Ok the problem is solved

[ovirt-users] Re: How to assign 1 VM to one user in ovirt 4.3

2019-05-28 Thread Staniforth, Paul
Hi Harry, you'll also need to make sure they don't have roles on a higher level object (datacenter, cluster) since it is hierarchical and they will have it applied to all the VMs below it. Regards, Paul S. From: Lucie

[ovirt-users] Re: integration with openstack nove-compute

2019-05-01 Thread Staniforth, Paul
Can you use nested virtuliazation with KVM hypervisors? Also there is OpenStack Platform director for RHEV, I don't know if there is an equivalent for oVirt. https://www.redhat.com/en/blog/virtualize-your-openstack-control-plane-red-hat-virtualization-and-red-hat-openstack-platform-13

[ovirt-users] Re: Vagrant Plugin

2019-04-10 Thread Staniforth, Paul
Hello Jeremy, you should have been contacted via your github issue. The current version of SecGen is at https://github.com/cliffe/SecGen/ and in oVirt you need to create templates as there isn't an online repository like there is with VirtualBox. Regards,

[ovirt-users] Re: Vagrant Plugin

2019-04-02 Thread Staniforth, Paul
Hi Jeremy, I've just had a quick word with Cliffe and will forward the email to him. Regards, Paul S. From: Jeremy Tourville Sent: 30 March 2019 18:50 To: users@ovirt.org Cc: Luca 'remix_tj' Lorenzetto Subject:

[ovirt-users] Re: Is iSCSI performance better for VMs on the selected Host?

2019-03-30 Thread Staniforth, Paul
Yes the SPM controls the metadata, such as creating,deleting virtual disks,snapshots,templates. https://www.ovirt.org/documentation/admin-guide/chap-Data_Centers.html Regards, Paul S. From: sebastian.frei...@aptiv.com Sent: 29 March 2019

[ovirt-users] Re: Is iSCSI performance better for VMs on the selected Host?

2019-03-28 Thread Staniforth, Paul
Hello Sebastian, you missed a bit from the paragraph Important: All communication to the storage domain is through the selected host and not directly from the oVirt Engine. At least one active host must exist in the system and be attached to the chosen data center.

[ovirt-users] Re: ETL DWH errors after restoring to a new server

2019-03-27 Thread Staniforth, Paul
datacenter_storage_domain_map | 56 kB | 48 kB storage_domain_configuration | 40 kB | 32 kB (40 rows) From: Staniforth, Paul Sent: 26 March 2019 18:09 To: users@ovirt.org Subject: ETL DWH errors after restoring to a new server Hello, I have deployed a new

[ovirt-users] Re: ovn-provider-network

2019-03-27 Thread Staniforth, Paul
I managed to get it working using the first option using /usr/share/ovirt-engine/bin/ovirt-register-sso-client-tool.sh Thanks, Paul S. From: Dominik Holler Sent: 22 March 2019 11:53 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re

[ovirt-users] ETL DWH errors after restoring to a new server

2019-03-26 Thread Staniforth, Paul
Hello, I have deployed a new machine to run our engine 4.2.8 using engine-backup to do a full backup/restore to a clean Centos install. We are now having a lot of errors with ovirt-engine-dwhd e.g. java.lang.OutOfMemoryError: Java heap space java.lang.OutOfMemoryError: GC

[ovirt-users] engine-backup ETL errors on new server

2019-03-21 Thread Staniforth, Paul
Hello, I have deployed a new server for our engine using engine-backup to backup and restore to a clean system. We now get errors ETL service sampling has encountered an error. Please consult the service log for more details. ETL service aggregation to hourly tables has encountered

[ovirt-users] Re: ovn-provider-network

2019-03-16 Thread Staniforth, Paul
From: Miguel Duarte de Mora Barroso Sent: 15 March 2019 16:15 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] ovn-provider-network On Fri, Mar 15, 2019 at 3:49 PM Staniforth, Paul wrote: > > Thanks, > I can see now from "ovn-sbctl show"

[ovirt-users] Re: ovn-provider-network

2019-03-15 Thread Staniforth, Paul
Duarte de Mora Barroso Sent: 15 March 2019 11:28 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] ovn-provider-network On Thu, Mar 14, 2019 at 3:04 PM Staniforth, Paul wrote: > > Thanks Miguel, > if we configure it connect to a physical ne

[ovirt-users] Re: ovn-provider-network

2019-03-15 Thread Staniforth, Paul
I've now got the second host working, the directory /etc/openvswitch/ was owned by root instead of openvswitch:openvswitch Thanks, Paul S. To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/

[ovirt-users] Re: ovn-provider-network

2019-03-14 Thread Staniforth, Paul
, Paul S. From: Miguel Duarte de Mora Barroso Sent: 14 March 2019 13:15 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] ovn-provider-network On Wed, Mar 13, 2019 at 10:08 PM Staniforth, Paul wrote: > > Hello, > >

[ovirt-users] Re: Hi question about Version 3 API deprecation.

2019-03-13 Thread Staniforth, Paul
FYI It looks like virt-viewer 7 is in RHEL8 Beta. The latest version of virt-viewer is 8, just released and version 6 changed the API version to 4. Maybe you could install a later version using Flatpak or Snap. Regards, Paul S. To view the terms under which this email is

[ovirt-users] ovn-provider-network

2019-03-13 Thread Staniforth, Paul
Hello, we are using oVirt-4.2.8 and I have created a logical network using the ovn-network-provider, I haven't configured it to connect to a physical network. I have 2 VMs running on 2 hosts which can connect to each other this logical network. The only connection between the

[ovirt-users] Re: Host affinity hard rule doesn't work

2019-03-13 Thread Staniforth, Paul
Try disabling or making the VM rule soft, it won't migrate more than one VM at a time so it can't migrate either VM without breaking the vms_rule. Regards, Paul S. From: zoda...@gmail.com Sent: 13 March 2019 07:49 To: users@ovirt.org

[ovirt-users] Re: Hi question about Version 3 API deprecation.

2019-03-12 Thread Staniforth, Paul
It will be the virt-viewer client on Centos, the latest version of virt-viewer for Centos and RHEL is 5. I haven't looked at RHEL8 Beta yet. Regards, Paul S. From: Yedidyah Bar David Sent: 12 March 2019 07:20 To: Jacob Green Cc: users

[ovirt-users] Re: virt-viewer centos7.6

2019-03-07 Thread Staniforth, Paul
of the API and the SDKs, before upgrading to version 4.4 of the engine. I know virt-viewer on RHEL 6 stopped working completely. Regards, Paul S. From: Michal Skrivanek Sent: 06 March 2019 09:48 To: Staniforth, Paul Cc: users@ovirt.org Subject:

[ovirt-users] Re: Unable to change cluster and data center compatibility version

2019-02-25 Thread Staniforth, Paul
. From: Jonathan Mathews Sent: 25 February 2019 11:11 To: Staniforth, Paul Cc: Shani Leviim; Ovirt Users Subject: Re: [ovirt-users] Re: Unable to change cluster and data center compatibility version Hi Paul Thank you for bringing this to my attention. It does look like I

  1   2   3   >