[ovirt-users] VM's in ? Unknown state.
Occasionally I have a single VM go into an "?" unknown state and the only method of recovery is to kill the PID on the host. This happens once or twice a week to 1 out of 500+ VM's. There is no pattern to this and VM operating system doesn't seem to make any difference. Logs are attached. aus02gmovirt01 is the Engine aus02gdc1kvm02 is the VM Host hung Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt+gluster+NFS : storage hicups
Nicolas, I have the same setup dedicated physical system running engine on CentOS 6.6 three hosts running CentOS 7.1 with Gluster and KVM, and firewall is disabled on all hosts. I also followed the same documents to build my environment so I assume they are very similar. I have on occasion had the same errors and have also found that "ctdb rebalanceip " is the only way to resolve the problem. I intend to remove ctdb since it is not needed with the configuration we are running. CTDB is only needed for hosted engine on a floating NFS mount, so you should be able change the gluster storage domain mount paths to "localhost:". The only thing that has prevented me from making this change is that my environment is live with running VM's. Please let me know if you go this route. Thank you, Tim Macy On Thu, Aug 6, 2015 at 8:41 AM, Nicolas Ecarnot wrote: > Le 06/08/2015 14:26, Sahina Bose a écrit : > > - "Host serv-vm-al03 cannot access the Storage Domain(s) >>>> attached to the Data Center" >>>> Just by waiting a couple of seconds lead to a self heal with no action. >>>> >>>> - Repeated "Detected change in status of brick >>>> serv-vm-al03:/gluster/data/brick of volume data from DOWN to UP." >>>> but absolutely no action is made on this filesystem. >>>> >>> >> This is coming from the earlier issue where the Host status was marked >> Down, the engine sees these bricks as being Down as well, and hence the >> state change messages >> > > OK : When I read "Host ... cannot access the Storage Domain ... attached > to the Data Center", and according to the setup described earlier (NFS on > ctdb on gluster), is it correct to translate it into > "this host can not NFS-mount the storage domain"? > > In which case it will help me to narrow down my debugging. > > > -- > Nicolas ECARNOT > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] virt-v2v
Will, Using .netrc is deprecated you can now define your own file with --password-file format is the same. Its a long read, but you can find everything you need on options in http://libguestfs.org/virt-v2v.1.html For v2v server setup I followed the RHEV docs - https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html-single/V2V_Guide/index.html ^ Tim On Thu, Jul 30, 2015 at 6:31 PM, Groten, Ryan wrote: > This doesn’t answer your question directly, but I never had any luck using > virt-v2v from VMWare. I found it worked well to treat the VMWare VM just > like a physical server, boot it from the virt-v2v iso and convert the > VMWare VM that way. > > > > *From:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On > Behalf Of *Will K > *Sent:* Thursday, July 30, 2015 3:58 PM > *To:* users@ovirt.org > *Subject:* [ovirt-users] virt-v2v > > > > Hi > > > > I have a project to convert VMs on VMware ESX 5.5 and some VM on > standalone KVM server to oVirt. I started to look into virt-v2v. I wonder > if I'm hitting the right list. Please let me know if this list doesn't > cover virt-v2v. > > > > Issue: > > when I run the following command on one of two hosts running oVirt > 3.3.3-2-el6 > > virt-v2v -ic esx://esxserver1/?no_verify=1 -os GFS1 virtmachine1 > > > > I got: > > virt-v2v: Failed to connect to qemu:///system: libvirt error code: 45, > message: authentication failed: Failed to step SASL negotiation: -7 > (SASL(-7): invalid parameter supplied: Unexpectedly missing a prompt result) > > > > I already added a .netrc which 600, correct oVirt login and password. I > also ran saslpasswd2 as root already. > > > > Thanks > > > > Will > > > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Making modules persistant on ovirt-node
On my configuration the FC device needs to come up after the Ethernet module is loaded. Using the methods suggested it is trying the load too early. I need a way to run the modprobe very late in the boot process. Thank you, Tim On Jun 26, 2015 2:57 AM, "Fabian Deutsch" wrote: > - Original Message - > > I recently added FCOE to my oVirt-node servers and I need a way for the > > modprobe to persist through reboot. > > Hey Tim, > > you can try adding the modprobe command to /etc/rc.d/rc.local > And the run > > $ chmod a+x /etc/rc.d/rc.local > $ persist /etc/rc.d/rc.local > > This might work, but it depends on when the FC device needs to be > accessible. > > - fabian > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Making modules persistant on ovirt-node
I recently added FCOE to my oVirt-node servers and I need a way for the modprobe to persist through reboot. Thanks, Tim ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] When can we expect updated packages for Venom Vulnerability
https://securityblog.redhat.com/2015/05/13/venom-dont-get-bitten/ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Ovirt fails to import Windows 8 & 2012 VM's using virt-v2v-1.28.1-1.28
I am unable to import VM's migrated with virt-v2v-1.28.1-1.28.el7.x86_64 / libguestfs-1.28.1-1.28.el7.x86_64. There is a virt-v2v bug on this, but it is identified as a oVirt issue - https://bugzilla.redhat.com/show_bug.cgi?id=1213701 Is there a scheduled release/fix for this issue? Thank you, Tim Macy ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.5.2 live merge
Seems very similar to this bug -
https://bugzilla.redhat.com/show_bug.cgi?id=1213157
On Thu, Apr 30, 2015 at 3:54 PM, Patrick Russell <
patrick_russ...@volusion.com> wrote:
> Our packages in my earlier email were incorrect. Here are the correct
> packages and some more logs:
>
> # rpm -qa |grep ovirt
> ovirt-engine-cli-3.5.0.5-1.el6.noarch
> ovirt-engine-setup-plugin-ovirt-engine-3.5.2-1.el6.noarch
> ovirt-engine-setup-plugin-allinone-3.5.2-1.el6.noarch
> ovirt-engine-setup-3.5.2-1.el6.noarch
> ovirt-engine-dbscripts-3.5.2-1.el6.noarch
> ovirt-engine-backend-3.5.2-1.el6.noarch
> ovirt-guest-tools-3.5.0-0.5.master.noarch
> ovirt-host-deploy-1.3.1-1.el6.noarch
> ovirt-engine-sdk-python-3.5.2.1-1.el6.noarch
> ovirt-engine-setup-plugin-ovirt-engine-common-3.5.2-1.el6.noarch
> ovirt-engine-restapi-3.5.2-1.el6.noarch
> ovirt-engine-userportal-3.5.2-1.el6.noarch
> ovirt-engine-3.5.2-1.el6.noarch
> ovirt-host-deploy-offline-1.3.1-1.el6.x86_64
> ovirt-engine-setup-plugin-websocket-proxy-3.5.2-1.el6.noarch
> ovirt-engine-websocket-proxy-3.5.2-1.el6.noarch
> ovirt-iso-uploader-3.5.2-1.el6.noarch
> ovirt-engine-extensions-api-impl-3.5.2-1.el6.noarch
> ovirt-engine-jboss-as-7.1.1-1.el6.x86_64
> ovirt-guest-tools-iso-3.5-7.noarch
> ovirt-image-uploader-3.5.1-1.el6.noarch
> ovirt-engine-lib-3.5.2-1.el6.noarch
> ovirt-engine-setup-base-3.5.2-1.el6.noarch
> ovirt-release35-003-1.noarch
> ovirt-engine-tools-3.5.2-1.el6.noarch
> ovirt-engine-webadmin-portal-3.5.2-1.el6.noarch
> ovirt-host-deploy-java-1.3.1-1.el6.noarch
>
> Logs:
>
> 2015-04-30 19:50:24,578 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotCommand] (ajp--127.0.0.1-8702-6)
> [4cbab1c6] Lock Acquired to object EngineLock [exclusiveLocks= key:
> f2afb8c7-6b1d-4822-a43a-0889178de719 value: VM
> , sharedLocks= ]
> 2015-04-30 19:50:24,689 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotCommand] (ajp--127.0.0.1-8702-6)
> [4cbab1c6] Running command: RemoveSnapshotCommand internal: false. Entities
> affected : ID: f2afb8c7-6b1d-4822-a43a-0889178de719 Type: VMAction group
> MANIPULATE_VM_SNAPSHOTS with role type USER
> 2015-04-30 19:50:24,723 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotCommand] (ajp--127.0.0.1-8702-6)
> [4cbab1c6] Lock freed to object EngineLock [exclusiveLocks= key:
> f2afb8c7-6b1d-4822-a43a-0889178de719 value: VM
> , sharedLocks= ]
> 2015-04-30 19:50:24,762 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotSingleDiskLiveCommand]
> (pool-7-thread-7) [598dbb1e] Running command:
> RemoveSnapshotSingleDiskLiveCommand internal: true. Entities affected :
> ID: ---- Type: Storage
> 2015-04-30 19:50:24,771 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotSingleDiskLiveCommand]
> (pool-7-thread-8) [5c8285eb] Running command:
> RemoveSnapshotSingleDiskLiveCommand internal: true. Entities affected :
> ID: ---- Type: Storage
> 2015-04-30 19:50:24,805 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (ajp--127.0.0.1-8702-6) Correlation ID: 4cbab1c6, Job ID:
> b0057939-d15a-4da7-b782-c835127a1413, Call Stack: null, Custom Event ID:
> -1, Message: Snapshot 'test_snap1' deletion for VM '3.5.2.wintest1' was
> initiated by patrick_russ...@corp.volusion.com.
> 2015-04-30 19:50:29,642 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotSingleDiskLiveCommand]
> (DefaultQuartzScheduler_Worker-13) [5c8285eb] Executing Live Merge command
> step MERGE
> 2015-04-30 19:50:29,665 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotCommandCallback]
> (DefaultQuartzScheduler_Worker-13) Waiting on Live Merge child commands to
> complete
> 2015-04-30 19:50:29,671 INFO [org.ovirt.engine.core.bll.MergeCommand]
> (pool-7-thread-9) [e10f6a3] Running command: MergeCommand internal: true.
> Entities affected : ID: 58ef50e1-2efb-4081-a3ca-493c2ee7e7b6 Type: Storage
> 2015-04-30 19:50:29,679 INFO
> [org.ovirt.engine.core.bll.RemoveSnapshotSingleDiskLiveCommand]
> (DefaultQuartzScheduler_Worker-13) [598dbb1e] Executing Live Merge command
> step MERGE
> 2015-04-30 19:50:29,697 INFO [org.ovirt.engine.core.bll.MergeCommand]
> (pool-7-thread-10) [4898b008] Running command: MergeCommand internal: true.
> Entities affected : ID: 58ef50e1-2efb-4081-a3ca-493c2ee7e7b6 Type: Storage
> 2015-04-30 19:50:29,703 INFO
> [org.ovirt.engine.core.vdsbroker.vdsbroker.MergeVDSCommand]
> (pool-7-thread-9) [e10f6a3] START, MergeVDSCommand(HostName =
> aus02gdkvm01.dev.volusion.com, MergeVDSCommandParameters{HostId =
> cfc227ef-c9ab-4c35-aa22-138c169f2ba6,
> vmId=f2afb8c7-6b1d-4822-a43a-0889178de719,
> storagePoolId=edca3dc6-d9ca-410f-af84-9e24d49df3e0,
> storageDomainId=58ef50e1-2efb-4081-a3ca-493c2ee7e7b6,
> imageGroupId=bb8359c6-1dba-45e2-97cb-929d1c83a7c8,
> imageId=87f26ef2-6a84-4f7c-9771-be76650c703c,
> baseImageId=3f90ced5-58ea-43cc-955a-559e8d89fbb2,
> topImageId=87f26ef2-6a84-4f7c-9771-be76650c703c, bandwidth=0}), log id:
> 5859dc0
> 2015-04-30 19:50:29,728 INFO
> [org.ovirt.engine.core.vdsbroker.v
[ovirt-users] Windows sysprep format
I have made a sealed Win 2012 template and resolved the issues with quotes around unattend.xml. Now I need help/examples on how to run a powershell script from the blank sysprep field. Any formatting info or examples would be helpful. Thank you, Tim Macy ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Using sysprep on Win 2012
Hello, I created a sealed Win 2012 template and I am trying to use Run Once with Boot Options - Attach Floppy [sysprep], along with defining numerous settings under initial run. This process fails to boot the server with the following errors: VM testtempl1a is down with error. Exit message: [Errno22] Invalid argument: '/tmp/tmpb9eQpf/'"Unattend.xml"'. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Can't send emails
Confirm that the ovirt-engine-notifier service is running. By default it
is set disabled/off.
ovirt-engine-notifier 0:off 1:off 2:off 3:off 4:off 5:off 6:off
On Tue, Feb 17, 2015 at 11:50 AM, RASTELLI Alessandro <
alessandro.raste...@skytv.it> wrote:
> Hi,
>
> I can’t send event-related emails from oVirt.
>
> I configured
> /usr/share/ovirt-engine/services/ovirt-engine-notifier/ovirt-engine-notifier.conf
> as follows and restarted ovirt-engine:
>
>
>
> #--#
>
> # Event Filter #
>
> #--#
>
>
>
> # Filter logic.
>
> #
>
> # First match algorithm for include/exclude messages.
>
> # Entry is message|*(subscriber|*)
>
> # * = all messages/all subscribers.
>
> # * as a subscriber should be used only for exclude.
>
> #
>
> # Message constants can be found at:
>
> # /usr/share/doc/ovirt-engine/AuditLogMessages.properties
>
> #
>
> # examples:
>
> # FILTER="include:VDC_START(smtp:m...@example.com) ${FILTER}"
>
> # FILTER="exclude:VDC_START include:*(smtp:ma...@gmail.com) ${FILTER}"
>
> #
>
> # The final filter list contains FILTER as well as 'event_subscriber'
> table records.
>
> # database record are considered first.
>
> #FILTER="exclude:*"
>
> FILTER="include:*(smtp:xxx@skytv.it)"
>
>
>
> #-#
>
> # EMAIL Notifications #
>
> #-#
>
>
>
> # The SMTP mail server address. Required.
>
> MAIL_SERVER=192.168.xxx.xxx
>
>
>
> # The SMTP port (usually 25 for plain SMTP, 465 for SMTP with SSL, 587 for
> SMTP with TLS)
>
> MAIL_PORT=25
>
>
>
> # Required if SSL or TLS enabled to authenticate the user. Used also to
> specify 'from' user address if mail server
>
> # supports, when MAIL_FROM is not set. Address is in RFC822 format
>
> MAIL_USER=
>
>
>
> # Required to authenticate the user if mail server requires authentication
> or if SSL or TLS is enabled
>
> SENSITIVE_KEYS="${SENSITIVE_KEYS},MAIL_PASSWORD"
>
> MAIL_PASSWORD=
>
>
>
> # Indicates type of encryption (none, ssl or tls) should be used to
> communicate with mail server.
>
> MAIL_SMTP_ENCRYPTION=none
>
> # If set to true, sends a message in HTML format.
>
> HTML_MESSAGE_FORMAT=false
>
>
>
> # Specifies 'from' address on sent mail in RFC822 format, if supported by
> mail server.
>
> MAIL_FROM=alarm.ov...@int.sky.it
>
>
>
> # Specifies 'reply-to' address on sent mail in RFC822 format.
>
> MAIL_REPLY_TO=
>
>
>
> # Interval to send smtp messages per # of IDLE_INTERVAL
>
> MAIL_SEND_INTERVAL=1
>
>
>
> # Amount of times to attempt sending an email before failing.
>
> MAIL_RETRIES=4
>
>
>
> Do I need to make something else?
>
> *Thank you*
>
> Alessandro
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding problems
Jorick, I experienced similar problems when setting up a few different
test clusters using bonds. I found that the vdsm is not setting the bonds
to persist. These are the steps that worked for me to get the host back
online and fix it permanently:
1. Put the host in Maintenance Mode.
2. Manually restore the network configuration back to your original setup
before joining the cluster. Tar up the configuration files in case you need
them again.
3. At this point you can attempt to run re-install on the host from the
engine *sometimes this worked other times it did not and I needed to do the
additional steps below.
If it fails to join:
1. Put the host in Maintenance Mode.
2. Manually restore the network configuration back to your original setup
before joining the cluster.
3. Remove vdsm from the host yum remove vdsm*
4. Delete the following vdsm configs rm -Rf /etc/vdsm ; rm -Rf
/var/lib/vdsm
5. Run re-install on the host from the engine
Making sure the network is setup to persist -
* Any networks that will persist will be identified in
/var/lib/vdsm/persistence/netconfs (bonds and nets directories) If they
are missing do the following
1. From the engine DC/Cluster/Hosts - select each host - from the menu
below select Network Interfaces - Run Setup Host Networks.
2. Verify they were added to /var/lib/vdsm/persistence/netconfs/bonds or
nets
Hope this helps.
Tim Macy
On Thu, Feb 12, 2015 at 10:29 AM, Martin Pavlík wrote:
> Hi Jorick,
>
> if I understand correctly you had ovirtmgmt over bond and now you’ve tried
> to move it to single interface? You mention that everything is gone after
> restarting. Restarting of what? What system is running on your hypervisors?
> Can you provide supervdsm.log from the affected node?
>
> Martin Pavlik
>
> RHEV QE
> > On 10 Feb 2015, at 17:58, Jorick Astrego wrote:
> >
> > After having problems with a bond and the ovirtmgmt interface on 3.5.1,
> I skipped bond0 and just added bond1 for gluster and bond2 for internet.
> >
> > When restarting, I loose all the bonds and I cannot use the "Setup Host
> networks" anymore:
> >
> >
> >
> > In the engine log, I see the following:
> >
> >
> > 2015-02-10 17:29:41,799 INFO
> [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor)
> Connecting to test4.netbulae.test/xx.xx.xx.xx
> > 2015-02-10 17:29:42,414 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
> (ajp--127.0.0.1-8702-4) [4be2b53a] Failed in SetupNetworksVDS method
> > 2015-02-10 17:29:42,414 WARN
> [org.ovirt.vdsm.jsonrpc.client.internal.ResponseWorker] (ResponseWorker)
> Exception thrown during message processing
> > 2015-02-10 17:29:42,414 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
> (ajp--127.0.0.1-8702-4) [4be2b53a]
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
> Missing required nics for bonding device., code = 21
> > 2015-02-10 17:29:42,416 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
> (ajp--127.0.0.1-8702-4) [4be2b53a] Command SetupNetworksVDSCommand(HostName
> = test4.netbulae.test, HostId = c4e1f226-a243-4a9a-8fa9-fc65f4518114,
> force=false, checkConnectivity=true, conectivityTimeout=120,
> > networks=[gluster {id=123ff683-fcf8-407b-94ca-f323c1fba326,
> description=null, comment=null, subnet=null, gateway=null, type=null,
> vlanId=null, stp=false, dataCenterId=0002-0002-0002-0002-031a,
> mtu=9000, vmNetwork=false, cluster=NetworkCluster {id={clusterId=null,
> networkId=null}, status=OPERATIONAL, display=false, required=true,
> migration=true}, providedBy=null, label=null, qosId=null},
> > uplink {id=51a63339-5570-4b58-b00c-9d54a534ff20,
> description=null, comment=null, subnet=null, gateway=null, type=null,
> vlanId=null, stp=false, dataCenterId=0002-0002-0002-0002-031a,
> mtu=0, vmNetwork=true, cluster=NetworkCluster {id={clusterId=null,
> networkId=null}, status=OPERATIONAL, display=false, required=true,
> migration=false}, providedBy=null, label=null, qosId=null}],
> > bonds=[bond1 {id=64135fde-a5de-404c-89a3-2ce13a1a7d84,
> vdsId=c4e1f226-a243-4a9a-8fa9-fc65f4518114, name=bond1,
> macAddress=**:**:**:**:**:**, networkName=gluster, bondOptions=mode=4
> miimon=100, bootProtocol=STATIC_IP, address=, subnet=, gateway=, mtu=9000,
> bridged=false, type=0, networkImplementationDetails={inSync=true,
> managed=true}},
> > bond2 {id=f2f26c27-85f3-413a-abb0-79db4b323c0e,
> vdsId=c4e1f226-a243-4a9a-8fa9-fc65f4518114, name=bond2,
> macAddress=**:**:**:**:**:**, networkName=null, bondOptions=mode=4
> miimon=100, bootProtocol=NONE, address=, subnet
[ovirt-users] Fenced hosts VM's never migrate
I have a 3 host cluster setup with HA enabled and fencing enabled and it appears to be working properly. Executing power management stop, start, and restart work along with host shutdown/restart following a simulated crash. When network is pulled a proxy is chosen and it powers off the downed host, and then restarts it. Since the network is still down it repeats the following in events: "Host kvm01 is not responding. It will stay in Connecting state for a grace period of 162 seconds and after that an attempt to fence the host will be issued." The real problem here is that the VM's on the host that has failed never migrate to a new host and remain down until the network is reconnected. We have tested this with back-end storage on gluster and NFS with the same result. This is on oVirt Engine Version: 3.5.1.1-1.el6. Hosts are on CentOS 7 and the Engine is standalone on CentOS 6.6. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] 3.5.0 to 3.5.1 Upgrade Steps
What are the proper steps to upgrade the engine from 3.5.0.1-1.el6 to 3.5.1-1.el6? engine-upgrade or engine-setup after yum update ovirt-engine-setup? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] When will oVirt Node 3.5 be released?
I am planning some upcoming projects and would like to know when oVirt Node 3.5 will be released? Thanks, Tim ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Ovirt 3.5 / CentOS 7 / GlusterFS - Host loses network config on reboot
I have a three node cluster that worked fine upon setup, but randomly (Its
happened three times now) when a host is rebooted it loses its network
config. I backed up the ifcfg*, route, and rule* files to quickly put
things back in place, but even then vdsm fails to start and host reinstall
from the engine errors on vdsm startup. The only way that I have found to
recover the node is yum remove vdsm* libvirt*, and rm -Rf /etc/vdsm
& /var/lib/vdsm. Then I can run host reinstall from the engine.
Where the error occurs in host-deploy log:
2015-01-20 01:21:58 DEBUG otopi.plugins.otopi.services.systemd
plugin.execute:866 execute-output: ('/bin/systemctl', 'start',
'vdsmd.service') stderr:
Job for vdsmd.service failed. See 'systemctl status vdsmd.service' and
'journalctl -xn' for details.
2015-01-20 01:21:58 DEBUG otopi.context context._executeMethod:152 method
exception
Traceback (most recent call last):
File "/tmp/ovirt-6z1CuMPhsV/pythonlib/otopi/context.py", line 142, in
_executeMethod
method['method']()
File
"/tmp/ovirt-6z1CuMPhsV/otopi-plugins/ovirt-host-deploy/vdsm/packages.py",
line 219, in _start
self.services.state('vdsmd', True)
File "/tmp/ovirt-6z1CuMPhsV/otopi-plugins/otopi/services/systemd.py",
line 138, in state
'start' if state else 'stop'
File "/tmp/ovirt-6z1CuMPhsV/otopi-plugins/otopi/services/systemd.py",
line 77, in _executeServiceCommand
raiseOnError=raiseOnError
File "/tmp/ovirt-6z1CuMPhsV/pythonlib/otopi/plugin.py", line 871, in
execute
command=args[0],
RuntimeError: Command '/bin/systemctl' failed to execute
2015-01-20 01:21:58 ERROR otopi.context context._executeMethod:161 Failed
to execute stage 'Closing up': Command '/bin/systemctl' failed to execute
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:490
ENVIRONMENT DUMP - BEGIN
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/error=bool:'True'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/exceptionInfo=list:'[(,
RuntimeError("Command '/bin/systemctl' failed to execute",), )]'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:504
ENVIRONMENT DUMP - END
2015-01-20 01:21:58 INFO otopi.context context.runSequence:417 Stage:
Pre-termination
2015-01-20 01:21:58 DEBUG otopi.context context.runSequence:421 STAGE
pre-terminate
2015-01-20 01:21:58 DEBUG otopi.context context._executeMethod:138 Stage
pre-terminate METHOD otopi.plugins.otopi.core.misc.Plugin._preTerminate
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:490
ENVIRONMENT DUMP - BEGIN
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/aborted=bool:'False'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/debug=int:'0'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/error=bool:'True'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/exceptionInfo=list:'[(,
RuntimeError("Command '/bin/systemctl' failed to execute",), )]'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/executionDirectory=str:'/root'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/log=bool:'True'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/pluginGroups=str:'otopi:ovirt-host-deploy'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/pluginPath=str:'/tmp/ovirt-6z1CuMPhsV/otopi-plugins'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
BASE/suppressEnvironmentKeys=list:'[]'
2015-01-20 01:21:58 DEBUG otopi.context context.dumpEnvironment:500 ENV
COMMAND/chkconfig=str:'/sbin/chkconfig'
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
