[ovirt-users] Move Self Hosted Engine to Standalone

2020-02-17 Thread jeremy_tourville
I have a single oVirt host running a self-hosted engine. I'd like to move the engine off the host and run it on a standalone server. I am running Software Version:4.3.6.6-1.el7 Can anyone tell me what the procedure is for that? ___ Users mailing list

[ovirt-users] What is this error message from?

2020-02-17 Thread jeremy_tourville
I have seen this error message repeatedly when reviewing events. VDSM vmh.cyber-range.lan command HSMGetAllTasksStatusesVDS failed: low level Image copy failed: ("Command ['/usr/bin/qemu-img', 'convert', '-p', '-t', 'none', '-T', 'none', '-f', 'raw',

[ovirt-users] Re: Template for Ubuntu 18.04 Server Issues

2020-01-29 Thread jeremy_tourville
Yes, I am using DHCP. I'll review the MAC address and try running virt-sysprep and report back. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/

[ovirt-users] Template for Ubuntu 18.04 Server Issues

2020-01-28 Thread jeremy_tourville
I have built a system as a template on oVirt. Specifically, Ubuntu 18.04 server. I am noticing an issue when creating new vms from that template. I used the check box for "seal template" when creating the template. When I create a new Ubuntu VM I am getting duplicate IP addresses for all

[ovirt-users] Re: Strategy to Mange Ovirt VMs Created from Templates

2019-12-23 Thread jeremy_tourville
Thank you for your reply Luca, In general your work flow is helpful and makes sense to me. I meant to say above- "As part of the template creation process ***the Ovirt docs*** say to seal the VM". So I think I understand that you need to use both processes (seal template + cloudinit) to

[ovirt-users] Strategy to Mange Ovirt VMs Created from Templates

2019-12-23 Thread jeremy_tourville
I want to be able to manage VMs using Ansible. As part of the template creation process it says to seal the VM. Can someone tell me what sealing does to a Linux VM? I understand it removes some of things that make the VM unique but no real specifics. So, if I want to manage a VM created

[ovirt-users] Re: ovirtsdk4 error

2019-12-10 Thread jeremy_tourville
I should have caught that. This is my first time using this project so I sort of thought I might have a config issue (my fault) Yes, I agree after reviewing https://github.com/myoung34/vagrant-ovirt4 I see the example file lists "api" at the end of the url. I'll confirm later today.

[ovirt-users] ovirtsdk4 error

2019-12-09 Thread jeremy_tourville
I have a server which runs a project from Github called SecGen. SecGen uses Vagrant to provision VMs from templates. When I go to my project folder and run vagrant up I get an error. user@localhost:~/bin/SecGen/projects/SecGen20191207_183811$ vagrant up Bringing machine 'escalation' up with

[ovirt-users] Re: multiple vm got stack after gluster server hardware failure

2019-10-22 Thread jeremy_tourville
If you can define "stuck" with some more detail I am sure many here could help you further. Are the VMs in question displayed as "paused" by the engine? Have you tried using virsh at the command line to see if you can shutdown or start the VMs? I have found that sometimes virsh will work to

[ovirt-users] Re: Ovirt Node 4.3.6 Logical Network Issue - Network Down

2019-10-22 Thread jeremy_tourville
I did some further testing. In short, if I attach logical network/VLAN 103 to enp96s0f0 the network will come up and be available for use. If I attach VLAN 103 to enp96s0f1 the logical network never comes up. I have sort of answered my own question, though I don't fully understand why. If

[ovirt-users]Re: Can ovirt-node support multiple network cards ?

2019-10-21 Thread jeremy_tourville
I am unable to tell from your question what research you have done or what you have tried so far. Anyway, review this- https://ovirt.org/documentation/admin-guide/chap-Logical_Networks.html. Generally speaking, the checkbox for "Connect to physical network" should not be needed for your

[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
>>>Congratulations LOL, yes That's just about right. I'd say I agree with you. The language used in the error output wasn't real clear to me either. I'll have to add something in the docs that say: ***WARNING/*** Fencing will not work on a single host. You must have at least 2

[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
Oh wait! Now I see what you mean: Test failed: Failed to run fence status-check on host 'vmh.cyber-range.lan'. No other host was available to serve as proxy for the operation. The 2nd host would be the proxy... Well bummer. ___ Users mailing list --

[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
No just a single host. I didn't see any documentation that said you need two or more hosts. You could be right. I did some further testing by installing ipmitool on my laptop. [root@lt ~]# ipmitool -v -I lanplus -H 172.30.50.2 -U ADMIN session info all Password: session handle

[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
I did totally remove that value. It still fails. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:

[ovirt-users] Re: Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
I tried lanplus=0 and totally removing it. The result is the same, test failed. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of

[ovirt-users] Fencing Agent using SuperMicro IPMI Fails

2019-10-20 Thread jeremy_tourville
I am trying to setup my power management fencing agent on the host. Address: I put in the IP address of the web page for IPMI. (Which does work via my web browser without issue) Username: ADMIN PW: my_password Type: ipmilan Options: lanplus=1 I click on the test button and it fails. Board

[ovirt-users] Ovirt Node 4.3.6 Logical Network Issue - Network Down

2019-10-20 Thread jeremy_tourville
I have built a new host and my setup is a single hyperconverged node.. I followed the directions to create a new logical network. I see that the engine has marked the network as being down. (Hosts>Network Interfaces Tab>Setup Host Networks) Here is my network config on the host- [root@vmh

[ovirt-users] Thin pool best proctices

2019-10-07 Thread jeremy_tourville
After a week of downtime from a thin pool that had 100% full metadata I decided to rebuild my single node. My post was formerly titled: Ovirt 4.2.7 won't start and drops to emergency console. I have backups of nearly all my VMs and I am working on importing them. I went from version 4.2.7.1

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-03 Thread jeremy_tourville
I did some checking and my disk is not in a state I expected. (The system doesn't even know the VG exists in it's present state) See the results: # pv PV VG Fmt Attr PSize PFree /dev/md127 onn_vmh lvm2 a-- 222.44g 43.66g /dev/sdd1 gluster_vg3 lvm2 a-- <4.00g

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-02 Thread jeremy_tourville
Sorry for the multiple posts. I had so many thoughts rolling around in my head. I'll try to consolidate my questions here and rephrase the last three responses. >>>"Try to get all data in advance (before deactivating the VG)". Can you clarify? What do you mean by this? >>>"I still can't

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-01 Thread jeremy_tourville
http://man7.org/linux/man-pages/man7/lvmthin.7.html Command to repair a thin pool: lvconvert --repair VG/ThinPoolLV Repair performs the following steps: 1. Creates a new, repaired copy of the metadata. lvconvert runs the thin_repair command to read damaged metadata

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-01 Thread jeremy_tourville
Here is my fstab file: # /etc/fstab # Created by anaconda on Fri Dec 21 22:26:32 2018 # # Accessible filesystems, by reference, are maintained under '/dev/disk' # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/onn_vmh/ovirt-node-ng-4.2.7.1-0.20181216.0+1 / ext4

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-01 Thread jeremy_tourville
I don't know why I didn't think to get some more info regarding my storage environment and post it here earlier. My gluster_vg1 volume is on /dev/sda1. I can access the engine storage directory but I think that is because it is not thin provisioned. I guess I was too bogged down in solving

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-10-01 Thread jeremy_tourville
"lvs -a" does not list the logical volume I am missing. "lvdisplay -m /dev/gluster_vg1-lvthinpool-tpool_tmeta" does not work either. Error message is: Volume Group xxx not found. Cannot process volume group xxx." I am trying to follow the procedure from

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-09-30 Thread jeremy_tourville
vgs displays everything EXCEPT gluster_vg1 "dmsetup ls" does not list the VG in question. That is why I couldn't run the lvchange command. They were not active or even detected by the system. OK, I found my problem, and a solution: https://access.redhat.com/solutions/3251681 # cd /var/log #

[ovirt-users] Re: How should ovirt-engine be repaired if it is hung up

2019-09-29 Thread jeremy_tourville
#1 How is it hung? Please provide more details. #2 The ovirt engine can be moved by creating a backup. See chap 12 of the admin guide- https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration.html ___ Users mailing list --

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-09-29 Thread jeremy_tourville
Yes, I can take the downtime. Actually, I don't have any choice at the moment because it is a single node setup. :) I think this is a distributed volume from the research I have performed. I posted the lvchange command in my last post, this was the result- I ran the command lvchange -an

[ovirt-users] Re: Ovirt 4.2.7 won't start and drops to emergency console

2019-09-29 Thread jeremy_tourville
Thank you for the reply. Please pardon my ignorance, I'm not very good with GlusterFS. I don't think this is a replicated volume (though I could be wrong) I built a single node hyperconverged hypervisor. I was reviewing my gdeploy file from when I originally built the system. I have the

[ovirt-users] Ovirt 4.2.7 won't start and drops to emergency console

2019-09-28 Thread jeremy_tourville
I see evidence that appears to be a problem with gluster. /var/log/messages has multiple occurrences of: WARNING: /dev/gluster_vg1/lv_: Thin's tihin-pool needs inspection. Also, if I run vgs I am returned info for my other volume groups but not gluster_vg1. Lastly, when reviewing

[ovirt-users] Upgrade Hyperconverged Single Node

2019-06-18 Thread jeremy_tourville
Does this page apply? https://www.ovirt.org/documentation/upgrade-guide/chap-Updates_between_Minor_Releases.html My Node is presently running 4.2.7 and I'd like to upgrade to 4.3.4 I was reading about needing to fail over so the SPM role is available (ie more than 1 host) If the page above is

[ovirt-users] Hosted Engine Deployment Fails - Ansible Playbook

2018-08-16 Thread jeremy_tourville
Can someone help me troubleshoot what my issue is? I have tried to setup hosted engine using static and DHCP addresses and both times it fails. Many thanks in advance! [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the